Low-frequency modulation sensors using nanosecond fluorophores

Thermally Activated Delayed Photoluminescence: Deterministic Control of Excited-State Decay

Thermally activated photophysical processes are ubiquitous in numerous organic and metal-organic molecules, leading to chromophores with excited-state properties that can be considered an equilibrium mixture of the available low-lying states. Relative populations of the equilibrated states are governed by temperature. Such molecules have been devised as high quantum yield emitters in modern organic light-emitting diode technology and for deterministic excited-state lifetime control to enhance chemical reactivity in solar energy conversion and photocatalytic schemes. The recent discovery of thermally activated photophysics at CdSe nanocrystal-molecule interfaces enables a new paradigm wherein molecule-quantum dot constructs are used to systematically generate material with predetermined photophysical response and excited-state properties. Semiconductor nanomaterials feature size-tunable energy level engineering, which considerably expands the purview of thermally activated photophysics beyond what is possible using only molecules. This Perspective is intended to provide a nonexhaustive overview of the advances that led to the integration of semiconductor quantum dots in thermally activated delayed photoluminescence (TADPL) schemes and to identify important challenges moving into the future. The initial establishment of excited-state lifetime extension utilizing triplet-triplet excited-state equilibria is detailed. Next, advances involving the rational design of molecules composed of both metal-containing and organic-based chromophores that produce the desired TADPL are described. Finally, the recent introduction of semiconductor nanomaterials into hybrid TADPL constructs is discussed, paving the way toward the realization of fine-tuned deterministic control of excited-state decay. It is envisioned that libraries of synthetically facile composites will be broadly deployed as photosensitizers and light emitters for numerous synthetic and optoelectronic applications in the near future.

Excited-State Triplet Equilibria in a Series of Re(I)-Naphthalimide Bichromophores

We present the synthesis, structural characterization, electronic structure calculations, and the ultrafast and supra-nanosecond photophysical properties of a series of five bichromophores of the general structural formula [Re(5-R-phen)(CO)₃(dmap)](PF₆), where R is a naphthalimide (NI), phen = 1,10-phenanthroline, and dmap is 4-dimethylaminopyridine. The NI chromophores were systematically modified at their 4-positions with -H (NI), -Br (BrNI), phenoxy (PONI), thiobenzene (PSNI), and piperidine (PNI), rendering a series of metal-organic bichromophores (Re1-Re5, respectively) featuring variability in the singlet and triplet energies in the pendant NI subunit. Five closely related organic chromophores as well as [Re(phen)(CO)₃(dmap)](PF₆) (Re6) were investigated in parallel to appropriately model the photophysical properties exhibited in the bichromophores. The excited state processes of all molecules in this study were elucidated using a combination of transient absorption spectroscopy and time-resolved photoluminescence (PL) spectroscopy, revealing the kinetics of the energy transfer processes occurring between the appended chromophores. The spectroscopic analysis was further supported by electronic structure calculations which identified the origin of many of the experimentally observed electronic transitions.

Confocal Luminescence Lifetime Imaging with Variable Scan Velocity and Its Application to Oxygen Sensing

The dependence of the luminescence lifetime on the probe environment is the basis of a range of sensing techniques. The major advantage of using the lifetime as the sensitive parameter is its independence on the probe concentration. However, the instrumentation for lifetime measurements is complex, generally requiring time-resolved excitation and detection. Here, we present a simple method for the measurement of luminescence lifetimes on the microsecond scale based on variable excitation time determined by the scanning velocity. The technique is implemented in a confocal laser scanning microscope (CLSM), thus allowing not only simple lifetime measurement but also phosphorescence lifetime imaging. Since the method exploits the spatiotemporal dependence of sample excitation in a CLSM, there is no need for a pulsed or modulated light source or for additional time-resolved detection. The method can be realized in a standard CLSM without any modifications. The principle is demonstrated on oxygen sensing by collisional quenching of an oxygen-sensitive ruthenium(II) complex.

Synthesis and photophysical and electrochemical properties of functionalized mono-, bis-, and trisanthracenyl bridged Ru(II) bis(2,2':6',2"-terpyridine) charge transfer complexes

With the aim of developing new molecular devices having long-range electron transfer in artificial systems and as photosensitizers, a series of homoleptic ruthenium(II) bisterpyridine complexes bearing one to three anthracenyl units sandwiched between terpyridine and 2-methyl-2-butenoic acid group are synthesized and characterized. The complexes formulated as bis-4'-(9-monoanthracenyl-10-(2-methyl-2-butenoic acid) terpyridyl) ruthenium(II) bis(hexafluorophosphate) (RBT1), bis-4'-(9-dianthracenyl-10-(2-methyl-2-butenoic acid) terpyridyl) ruthenium(II) bis(hexafluorophosphate) (RBT2), and bis-4'-(9-trianthracenyl-10-(2-methyl-2-butenoic acid) terpyridyl) ruthenium(II) bis(hexafluorophosphate) (RBT3) were characterized by elemental analysis, FT-IR, UV-Vis, photoluminescence, (1)H and (13)C NMR spectroscopy, and electrochemical techniques by elemental analysis, FT-IR, UV-Vis, photoluminescence, (1)H and (13)C NMR spectroscopy, and electrochemical techniques. The cyclic voltammograms (CVs) of (RBT1), (RBT2), and (RBT3) display reversible one-electron oxidation processes at E 1/2 = 1.13 V, 0.71 V, and 0.99 V, respectively (versus Ag/AgCl). Based on a general linear correlation between increase in the length of π-conjugation bond and the molar extinction coefficients, the Ru(II) bisterpyridyl complexes show characteristic broad and intense metal-to-ligand charge transfer (MLCT) band absorption transitions between 480-600 nm, ε = 9.45 × 10(3) M(-1) cm(-1), and appreciable photoluminescence spanning the visible region.

Photochemistry and excited state prototropic behaviour of 8-amino 2-naphthol

In the present work, photophysical behaviour of 8-amino 2-naphthol in various solvents as well as at various pH values has been investigated. Various ground and excited state species are noticed. It exhibits a completely different photo prototropic behaviour as compared to its parent molecule 2-naphthol. The spectral and transient studies indicate that at lower pH values, equilibrium between cation and neutral exists in the excited state. At neutral pH some peculiar behaviour in its spectral properties is noticed.

Organically modified silica: synthesis and applications due to its surface interaction with organic molecules

Silica gels can be chemically modified using organic precursors producing organically modified silica (ORMOSIL), a class of novel materials for hosting varieties of organic and inorganic substrates. Ormosil matrixed materials show an enhanced activity during catalysis, photochemical activities like absorption and emission, electrochemical sensitivities, sensing of gases, solvents, pH of solution and biomolecules, etc. Ormosil-based materials can be used as efficient protective coatings and can be utilized in designing wave guides that can carry out excellent photonic transmission of information. The synthetic and chemical modification of ormosil and some of the above applications have been discussed.

Novel coumarin-based fluorescent pH indicators, probes and membranes covering a broad pH range

A new family of coumarin-based pH indicators was synthesized. They are sensitive to pH in either weakly acidic or weakly basic solution. The indicators possess moderate to high brightness, excellent photostability and compatibility with light-emitting diodes. The indicators were covalently immobilized on the surface of amino-modified polymer microbeads which in turn were incorporated into a hydrogel matrix to obtain novel pH-sensitive materials. When a mixture of two different microbeads is used, the membranes are capable of optical pH sensing over a very wide range comparable to the dynamic range of the glass electrode (pH 1-11).

Modified dual lifetime referencing method for simultaneous optical determination and sensing of two analytes

Simultaneous fluorometric sensing of two analytes becomes possible using a modified dual lifetime referencing (m-DLR) method. In this scheme, two luminescent indicators are needed that have overlapping absorption and emission spectra but largely different decay times. They are excited by a single light source, and both emissions are measured simultaneously. In the frequency domain m-DLR method, the phase of the short-lived fluorescence of a first indicator is referenced against that of the long-lived luminescence of the second indicator. The analytical information is obtained by measurement of the phase shifts at two modulation frequencies. The method is demonstrated to work for the case of dually sensing oxygen and carbon dioxide. It benefits from simple instrumentation and optical setup. The approach is perceived to be of wide applicability. Examples include (1) analysis of two luminescent analytes, (2) analytical determinations that make use of two probes, and (3) sensing of two species such as carbon dioxide and oxygen (as demonstrated here), or oxygen and chlorophyll, provided the luminophores meet the condition of having largely different decay times and overlapping absorption and emission spectra.

Fatty acid sensor for low-cost lifetime-assisted ratiometric sensing using a fluorescent fatty acid binding protein

Elevated free fatty acid (FA) levels lead to insulin resistance, hypertension, and microangiopathy, all of which are associated with type 2 diabetes. On the other hand, deficiencies of FA are indicative of certain neurodegenerative diseases, including autism. Thus, free FA levels are a diagnostic indicator for a variety of disorders. Here we describe the use of a commercially available FA binding protein labeled with acrylodan (ADIFAB), which we modified with a ruthenium metal-ligand complex with the intention of creating a low-cost FA sensor. The dual-labeled FA binding protein was used in lifetime-assisted ratiometric sensing (LARS) of oleic acid. For both steady-state and time-resolved luminescence decay experiments, the protein is responsive to oleic acid in the range of 0.02-4.7 microM. The emission at 432 nm, which is associated with the acrylodan occupying the FA binding site, decreases in intensity and red shifts to 505 nm on the addition of oleic acid. The intensities of the 505-nm peak due to the acrylodan displaced from the binding site by FA and of the 610-nm emission peak of ruthenium remained nearly unchanged. Fitting of the fluorescence decay data using the method of least squares revealed three emitting components with lifetimes of approximately 0.60, 4.00, and 370 ns. Fractional intensities of the emitting species indicate that changes in modulation between 2 and 10 MHz on binding of the protein with oleic acid are due mainly to the 4.00-ns component. The 0.60- and 370-ns components are assigned to acrylodan (505 nm) and ruthenium, respectively. Note that because ruthenium has a lifetime that is two orders of magnitude longer than that of acrylodan, the FA measurements were carried out at excitation frequencies lower than what can be done with acrylodan alone. Thus, low-cost instrumentation can be designed for a practical FA sensor without sacrificing the quality of measurements.

Carboxy SNARF-4F as a Fluorescent pH Probe for Ensemble and Fluorescence Correlation Spectroscopies

The optical spectroscopic properties of 1,4(and 5)-benzenedicarboxylic acid, 2-[10-(dimethylamino)-4-fluoro-3-oxo-3H-benzo[c]xanthen-7-yl] (carboxy SNARF-4F), a commercial promising fluorescent pH probe, are investigated in buffered aqueous solutions in the 5.6-8.2 pH range by steady-state and time-resolved spectroscopy. A multiexponential global analysis of the picosecond time-resolved data is performed. The nonprotonated A species decays monoexponentially (0.73 ns), while the protonated species AH decays following a biexponential law with time constants of 0.40 and 1.87 ns. A kinetic scheme is proposed to explain the observations, which involves AH in equilibrium with a species denoted Y. The nature of Y is discussed in terms of a possible structural change in the molecule producing the lactone form, although the formation of a hydrogen-bonded complex to the solvent cannot be ruled out. Finally, the ability of the dye to probe pH at the single-molecule level is explored using fluorescence correlation spectroscopy.

Measurements of FRET in a Glucose-sensitive Affinity System with Frequency-domain Lifetime Spectroscopy

We report measurements of fluorescence resonance energy transfer (FRET) for glucose sensing in an established concanavalin A-dextran affinity system using frequency-domain lifetime spectroscopy. A dextran (MW 2,000,000) labeled with a small fluorescent donor molecule, Alexa Fluor 568, was used to competitively bind to a sugar-binding protein, concanavalin A, labeled with acceptor molecule, Alexa Fluor 647, in the presence of glucose. The FRET-quenching kinetics of the donor were analyzed from frequency-domain measurements as a function of both glucose and acceptor-protein concentrations using a Förster-type decay kinetics model. The results show that the frequency-domain measurements and donor decay kinetics can quantitatively indicate changes in the competitive binding of 0.09 microM dextran to labeled concanavalin A at a solution concentration of 10.67 microM in the presence of glucose at concentrations ranging from 0 to 224 mg/dL.

Fluorescence-sensing methods

Novel approaches to sensor design, based on the use of an internal standard with appropriate spectral properties, provide new possibilities for designing simple devices for fluorescence sensing. Detection of combined emission from the reference and an analyte-sensitive fluorophore has been achieved in numerous measurements in cuvettes, tissues, and high-throughput formats. These methods have been used with a long-lifetime reference to measure pH, O2, pCO2, glucose, and calcium by means of modulation-sensing methods as well as by the use of oriented films as the reference for polarization sensing of glucose, pH, oxygen, and lactate. Polarization sensing has also been developed with visual detection to measure the concentration of rhodamine B and pH. Modulation and polarization sensing was found to be effective in highly scattering media such as Intralipid or tissue. The applicability of these technologies to transdermal diagnostics depends on the availability of red fluorophores that can be used in vivo. One dye that could possibly be used is indocyanine green (IcG), which absorbs and emits at wavelengths above 700 nm. Furthermore, IcG has already been approved for use in humans for monitoring burn severity and it has been detected through the skin. It appears likely that modern optics and electronic technology will allow the development of practical devices for biomedical use as shown in Scheme 1.

Self-referencing intensity measurements based on square-wave gated phase-modulation fluorimetry

An adaptation of square-wave gated phase-modulation (GPM) fluorimetry allows for self-referenced intensity measurements without the complexity of dual excitation or dual emission wavelengths. This AC technique utilizes square-wave excitation, gated detection, a reference emitter, and a sensor molecule. The theory and experimental data demonstrating the effectiveness and advantages of the adapted GPM scheme are presented. One component must have an extremely short lifetime relative to the other. Both components are affected identically by changes in intensity of the excitation source, but the sensor intensity also depends on the concentration of the analyte. The fluctuations of the excitation source and any optical transmission changes are eliminated by ratioing the sensor emission to the reference emission. As the concentration of the analyte changes, the corresponding sensor intensity changes can be quantified through several schemes including digitization of the signal and digital integration or AC methods. To measure pH, digital methods are used with Na3[Tb(dpa)3] (dpa = 2,6-pyridinedicarboxylic acid) as the long-lived reference molecule and fluorescein as the short-lived sensor molecule. Measurements from the adapted GPM scheme are directly compared to conventional ratiometric measurements. Good agreement between the data collection methods is demonstrated through the apparent pKa. For the adapted GPM measurements, conventional measurements, and a global fit the apparent pKa values agree within less than 2%. A key element of the adapted GPM method is its insensitivity to fluctuations in the source intensity. For a roughly 8-fold change in the excitation intensity, the signal ratio changes by less than 3%.

Reagentless optical sensing of glutamine using a dual-emitting glutamine-binding protein

Glutamine is a major source of nitrogen and carbon in cell culture media. Thus, glutamine monitoring is important in bioprocess control. Here we report a reagentless fluorescence sensing for glutamine based on the Escherichia coli glutamine-binding protein (GlnBP) that is sensitive in the submicromolar ranges. The S179C variant of GlnBP was labeled at the -SH and N-terminal positions with acrylodan and ruthenium bis-(2,2'-bipyridyl)-1,10-phenanthroline-9-isothiocyanate, respectively. The acrylodan emission is quenched in the presence of glutamine while the ruthenium acts as a nonresponsive long-lived reference. The apparent binding constant, K'(d), of 0.72 microM was calculated from the ratio of emission intensities of acrylodan and ruthenium (I(515)/I(610)). The presence of the long-lived ruthenium allowed for modulation sensing at lower frequencies (1-10 MHz) approaching an accuracy of +/-0.02 microM glutamine. Dual-frequency ratiometric sensing was also demonstrated. Finally, the extraordinary sensitivity of GlnBP allows for dilution of the sample, thereby eliminating the effects of background fluorescence from the culture media.

Sol-gel based optical carbon dioxide sensor employing dual luminophore referencing for application in food packaging technology

An optical sensor for the measurement of carbon dioxide in Modified Atmosphere Packaging (MAP) applications has been developed. It is based on the fluorescent pH indicator 1-hydroxypyrene-3,6,8-trisulfonate (HPTS) immobilised in a hydrophobic organically modified silica (ormosil) matrix. Cetyltrimethylammonium hydroxide was used as an internal buffer system. Fluorescence is measured in the phase domain by means of the Dual Luminophore Referencing (DLR) sensing scheme which provides many of the advantages of lifetime-based fluorometric sensors and makes it compatible with established optical oxygen sensor technology. The long-term stability of the sensor membranes has been investigated. The sensor displays 13.5 degrees phase shift between 0 and 100% CO2 with a resolution of better than 1% and a limit of detection of 0.08%. Oxygen cross-sensitivity is minimised (0.6% quenching in air) by immobilising the reference luminophore in polymer nano-beads. Cross-sensitivity towards chloride and pH was found to be negligible. Temperature effects were studied, and a linear Arrhenius correlation between ln k and 1/T was found. The sensor is stable over a period of at least seven months and its output is in excellent agreement with a standard reference method for carbon dioxide analysis.

Ratiometric pH Measurements Using LysoSensor DND-192

A method for the ratiometric pH sensing using LysoSensor DND-192 is presented in this paper. It works in the physiological pH range. It is based on the use of two fluorophores which differ significantly in their lifetimes. As the discrimination of their emissions is performed through two different frequencies, this method can allow significant overlap of the emission spectra. A simple long-pass filter, or a combination of long- and short-pass filters, was used instead of narrow-bandpass devices. Importantly, the measurements were carried out under strong ambient light. The method could be used in a wide variety of applications, such as intracellular measurements, microscopy, bioprocess monitoring, etc.

On the Possibility of Glucose Sensing Using Boronic Acid and a Luminescent Ruthenium Metal-Ligand Complex

We describe a new approach to optical sensing of glucose based on the competitive interactions between a ruthenium metal ligand complex, a boronic acid derivative and glucose. The metal-ligand complex [Ru(2,2'-bipyridme)2(5,6-dihydroxy-1,10-phenanthrolme)](PF6)2 at pH 8 forms a reversible complex with 2-toluylboronic acid or 2-methoxyphenyl boronic acid. Complexation is accompanied by a several-fold increase in the luminescent intensity of the ruthenium complex. Addition of glucose results in decreased luminescent intensity, which appears to be the result of decreased binding between the metal-ligand complex and the boronic acid. Ruthenium metal-ligand complexes are convenient for optical sensing because their long luminescent decay times allow lifetime-based sensing with simple instrumentation.

Polarization oxygen sensor: a template for a class of fluorescence-based sensors

We describe a novel oxygen polarization sensor based on a single molecule that changes the observed anisotropy of its emission with variation of the oxygen concentration. The approach is demonstrated both in solution and in solid films. A simple mathematical description of the sensor is included and experimentally verified. The technique demonstrated here creates opportunity for development of a new class of polarization-based dyes and sensors.

Multicomponent lifetime-based pH sensors utilizing constant-lifetime probes

A multicomponent luminescent sensor system is described that uses probe species with constant lifetimes to generate an analyte-dependent change in the apparent sensor lifetime. This new sensing scheme not only allows for lifetime-based measurement techniques to be applied to sensors that employ static quenching interactions but also provides the ability to vary the sensitivity of the sensor system with simple changes in instrumental parameters. A model for the multicomponent sensor is presented, followed by data measured using a prototype pH sensor based on the model.

New Ru(II) chromophores with extended excited-state lifetimes

We describe the synthesis, electrochemical, and photophysical properties of two new luminescent Ru(II) diimine complexes covalently attached to one and three 4-piperidinyl-1,8-naphthalimide (PNI) chromophores, [Ru(bpy)(2)(PNI-phen)](PF(6))(2) and [Ru(PNI-phen)(3)](PF(6))(2), respectively. These compounds represent a new class of visible light-harvesting Ru(II) chromophores that exhibit greatly enhanced room-temperature metal-to-ligand charge transfer (MLCT) emission lifetimes as a result of intervening intraligand triplet states ((3)IL) present on the pendant naphthalimide chromophore(s). In both Ru(II) complexes, the intense singlet fluorescence of the pendant PNI chromophore(s) is nearly quantitatively quenched and was found to sensitize the MLCT-based photoluminescence. Excitation into either the (1)IL or (1)MLCT absorption bands results in the formation of both (3)MLCT and (3)IL excited states, conveniently monitored by transient absorption and fluorescence spectroscopy. The relative energy ordering of these triplet states was determined using time-resolved emission spectra at 77 K in an EtOH/MeOH glass where dual emission from both Ru(II) complexes was observed. Here, the shorter-lived higher energy emission has a spectral profile consistent with that typically observed from (3)MLCT excited states, whereas the millisecond lifetime lower energy band was attributed to (3)IL phosphorescence of the PNI chromophore. At room temperature the data are consistent with an excited-state equilibrium between the higher energy (3)MLCT states and the lower energy (3)PNI states. Both complexes display MLCT-based emission with room-temperature lifetimes that range from 16 to 115 micros depending upon solvent and the number of PNI chromophores present. At 77 K it is apparent that the two triplet states are no longer in thermal equilibrium and independently decay to the ground state.

Dual Lifetime Referencing as Applied to a Chloride Optical Sensor

A membrane with an optical response to chloride has been developed that contains two luminophores that display two largely different decay times. The first luminophore (the "reference") is a chloride-insensitive ruthenium metal-ligand complex possessing a decay time in the microsecond range. The second luminophore is the short-lived chloride-quenchable fluorescent probe lucigenin. Both are contained in a hydrogel matrix and are excited by a blue LED emitting sinusoidally modulated light. Under these conditions, the chloride-dependent fluorescence intensity of lucigenin can be converted in an analyte-dependent fluorescence phase shift that depends on the ratio of the two luminescence intensities and can be measured at modulation frequencies of typically 45 kHz. The dynamic range of this sensor can be adjusted by either varying the ratio of the two luminophores or selecting a particular optical filter combination.

A protein biosensor for lactate

Blood lactate is a clinically valuable diagnostic indicator. In this preliminary report we describe a protein biosensor for L-lactate based on beef heart lactate dehydrogenase (LDH). LDH was noncovalently labeled with 8-anilino-1-naphthalene sulfonic acid (ANS). The ANS-labeled LDH displayed an approximately 40% decrease in emission intensity upon binding lactate. This decrease can be used to measure the lactate concentration. The ANS-labeled LDH was further utilized in a new sensing format, polarization sensing, which is suitable for miniaturization to a point-of-care lactate monitor. However, temporal instability of beef heart LDH indicates the need for further protein engineering prior to development of a more robust lactate-sensing protein.

Novel fluorescence sensing methods for high throughput screening

We describe two new methods of fluorescence sensing for use in high throughput screening (HTS). Modulation sensing transforms analyte-dependent intensity changes into a change in the low-frequency modulation signal. Polarization sensing transforms an intensity change into a change in polarization. Both methods are internally calibrated by using a reference film immediately adjacent to the sample, which can be readily located on the HTS plate or on a nearby optical component and provides an intensity or polarization reference. Modulation sensing and polarization sensing were both shown useful for measurements of fluorophore concentrations, pH, or calcium concentrations in the wells of HTS plates. Sensing with a reference film provides the opportunity to internally reference HTS measurements without the need for additions to the sample. This approach can provide standardization for assays performed at different times.

Fluorescence properties of rhodamine 800 in whole blood and plasma

We have characterized the fluorescence spectral properties of rhodamine 800 (Rh800) in plasma and blood in order to test the possibility of making clinical fluorescence measurements in whole blood without separation steps. Rh800 was used because of its absorption at red/near-infrared wavelengths away from the absorption bands of hemoglobin. We utilized the front-face illumination and detection to minimize the effects of absorption and/or scatter during measurements. The presence of Rh800 was detected in plasma and blood using steady-state fluorescence measurements. Absorption due to hemoglobin reduced the Rh800 intensity from the blood. Fluorescence lifetime measurements in plasma and blood showed that it is possible to recover lifetime parameters of Rh800 in these media. We obtained mean lifetimes of 1.90 and 1.86 ns for Rh800 in plasma and blood, respectively. Using the recently described modulation sensing method, we quantified the concentrations of Rh800 in plasma and blood. Rh800 was detected at a concentration of as low as 2 microM in both media. High anisotropy values were obtained for Rh800 in plasma and blood using steady-state and anisotropy decay measurements, implying the tight binding of this probe to the contents of these media. This binding can be exploited to monitor the concentrations of different blood components using already existing or new red-emitting probes that will be specially designed to bind to these components with high specificity. To test this possibility of direct measurements in blood, we used Rh800 to monitor albumin in the presence of red blood cells. Increase in the polarization of Rh800 as the concentration of albumin was increased in the presence of the red cells showed the feasibility of such measurements.

Modulation sensing of fluorophores in tissue: a new approach to drug compliance monitoring

We describe a method to detect the presence of fluorophores in scattering media, including intralipid suspensions and chicken muscle covered with skin. The fluorophores were rhodamine 800 (Rh800) and indocyanine green (IcG), both of which can be excited at long wavelengths where there is minimal absorption by tissues. These fluorophores were dissolved in intralipid or in chicken muscle under skin. A method to approximate the fluorophore concentration in such samples was developed using a long lifetime reference fluorophore in a polymer film placed immediately on the illuminated surface of the sample. Because of the long lifetime of the reference film, the modulation of its emission at low frequencies near 2 MHz is near zero. Since the lifetime of Rh800 and IcG are below 2 ns the modulation of the combined emission is a measure of the intensity of the fluorophore (Rh800 or IcG) relative to the long lifetime reference. Using this method we were able to measure the concentration-dependent intensities of Rh800 and IcG in an intralipid suspension. Additionally, micromolar concentrations of these probes could be detected in chicken muscles, even when the muscle was covered with a layer of chicken skin. The presence of an India ink absorber in the intralipid had only a moderate effect on the modulation values. We suggest the use of this transdermal detection of long-wavelength fluorophores as a noninvasive method to monitor patient compliance when taking medicines used for treatment of chronic diseases such as AIDS or tuberculosis. © 1999 Society of Photo-Optical Instrumentation Engineers.

Polarization-based sensing of glucose using an oriented reference film

We describe a new approach to glucose sensing using polarization measurements in the presence of a stretch-oriented reference film. The method relies on measurement of the polarized emission from the reference film and of a fluorophore which changes intensity in response to glucose. A glucose-sensitive fluorescent signal was provided by the glucose/galactose binding protein from E. coli. This protein was labeled with an environmentally sensitive fluorophore at a single genetically inserted cysteine residue, and displayed decreased fluorescence upon glucose binding. Using the protein and the reference film we observed glucose-sensitive polarization values for micromolar glucose concentrations. This method of polarization-based sensing is generic and can be used for any sensing fluorophore which displays a change in intensity. In principle, one can construct simple and economical devices for this type of glucose measurement. © 1999 Society of Photo-Optical Instrumentation Engineers.

Polarization-Based Sensing with a Self-Referenced Sample

We describe a new method of fluorescence sensing based on fluorescence polarization. The sensor consists of two compartments, both of which contain the sensing fluorophore. One side of the sensor contains a constant concentration of analyte, and the other contains the unknown concentration. Emission from both sides is observed through polarizers, with the polarization from the sample being rotated 90° from that of the reference. Changes in the fluorescence intensity of the sample result in changes in the measured polarization for the combined emission. We show that this approach can be used to measure glucose and calcium using fluorophores which show analyte-dependent intensity changes, and no change in the spectral shape. Only a single fluorophore is required, this being the sensing fluorophore in both sides of the sensor. We also show that polarization sensing of glucose and calcium can be performed with visual detection of the polarization. In this case the only electronic component is the light source. These simple schemes can be used with a variety of analytes. The only requirement is a change in fluorescence intensity in response to the analyte.

Polarization sensing with visual detection

We describe a new approach to fluorescence sensing which relies on visual determination the polarization. The sensing device consists of a fluorescent probe, which changes intensity in responses to the analyte, and an oriented fluorescent film, which is not affected by the analyte. An emission filter is selected to observe the emission from both the film and the sensing fluorophore. Changes in the probe intensity result in changes in the polarization of the combined emission from the sensor and reference. The degree of polarization can be detected visually using a dual polarizer with adjacent sections oriented orthogonally to each other. The emission passing through the dual polarizer is viewed with a second analyzing polarizer. This analyzer is rotated manually to yield equal intensities from both sides of the dual polarizer. This approach was used to measure the concentration of RhB in intralipid and to measure pH using 6-carboxyfluorescein. The analyzer angle is typically accurate to 1 degree, providing pH values accurate to +/- 0.1 pH unit at the midpoint of the titration curve. We also describe a method of visual polarization sensing that does not require an oriented film and that can use the same fluorophore for the sample and reference. These approaches to visual sensing are generic and can be applied to a wide variety of analytes for which fluorescent probes are available. Importantly, the devices are simple, with the only electronic component being the light source.

Anisotropy-based sensing with reference fluorophores

We describe a new approach to fluorescence sensing based on measurements of steady-state anisotropies in the presence of reference fluorophores with known anisotropies. The basic concept is that the anisotropy of a mixture reflects a weighted average of the anisotropies of the emitting species. By use of reference fluorophores the starting anisotropy can be near zero, or near 0.9 for oriented films which contain the reference fluorophore. Changing intensities of the analyte result in changes in anisotropy. A wide dynamic range of anisotropies is available because of the freedom to select high or low starting values. Anisotropy-based sensing was demonstrated for pH using 6-carboxyfluorescein and for protein affinity or immunoassay using an oriented film with high anisotropy and a protein labeled with a metal-ligand complex. The latter measurements were performed with a simple light-emitting diode excitation source without an excitation polarizer. The sensitive range of the assay can be adjusted by changing the intensity of the reference fluorophore. Anisotropy-based sensing can have numerous applications in clinical and analytical chemistry.

Glucose sensor for low-cost lifetime-based sensing using a genetically engineered protein

We describe a glucose sensor based on a mutant glucose/galactose binding protein (GGBP) and phase-modulation fluorometry. The GGBP from Escherichia coli was mutated to contain a single cysteine residue at position 26. When labeled with a sulfhydryl-reactive probe 2-(4'-iodoacetamidoanilino)naphthalene-6-sulfonic acid, the labeled protein displayed a twofold decrease in intensity in response to glucose, with a dissociation constant near 1 microM glucose. The ANS-labeled protein displayed only a modest change in lifetime, precluding lifetime-based sensing of glucose. A modulation sensor was created by combining ANS26-GGBP with a long-lifetime ruthenium (Ru) metal-ligand complex on the surface of the cuvette. Binding of glucose changed the relative intensity of ANS26-GGBP and the Ru complex, resulting in a dramatic change in modulation at a low frequency of 2.1 MHz. Modulation measurements at 2.1 MHz were shown to accurately determine the glucose concentration. These results suggest an approach to glucose sensing with simple devices.