Metalloporphyrins as Catalytic Models for Studying Hydrogen and Oxygen Evolution and Oxygen Reduction Reactions

Efficient electrolytic hydrogen evolution from cobalt porphyrin covalently functionalized with chain-like phosphazene on double-walled carbon nanotubes

The development of efficient electrocatalysts for the hydrogen evolution reaction (HER) is crucial for advancing electrochemical water splitting technology. Herein, we report a novel hybrid electrocatalyst, CoTHPP-PDCP@DWCNTs, synthesized through a covalent functionalization of cobalt-porphyrin (CoTHPP) with chain-like polydichlorophosphazenes (PDCP) and subsequent incorporation onto double-walled carbon nanotubes (DWCNTs). The successful synthesis was confirmed by various spectroscopic techniques, which collectively revealed strong electronic interactions between components, improved charge transfer, and enhanced electrochemical stability. Notably, CoTHPP-PDCP@DWCNTs exhibited excellent HER activity, achieving low overpotentials of 159 mV in 1.0 M KOH and 102 mV in 0.5 M H2SO4 at a current density of 10 mA cm-2, outperforming its precursors and many previously reported non-noble metal electrocatalysts. The enhanced HER performance can be attributed to the synergistic interactions between CoTHPP, PDCP, and DWCNTs, which increased the density of active sites, improved conductivity, and efficient charge transfer. This study highlights the importance of covalent linkage and structural engineering in optimizing HER electrocatalysts, providing insights for designing next-generation high-performance and durable non-noble metal-based electrocatalytic systems.

Probing the generation, reactivity, and kinetics of high-valent manganese-oxo phthalocyanines: Insights into oxidation mechanisms

In this study, manganese(IV)-oxo phthalocyanines [MnIV(Pc)(O)] (3) (Pc = phthalocyanine) were produced either through visible light photolysis of [MnIII(Pc)(ClO3)] or by chemical oxidation of [MnIII(Pc)Cl] (1) with iodobenzene diacetate. The manganese(IV)-oxo species under study include tetra-tert-butylphthalocyaine‑manganese(IV)-oxo (3a) and phthalocyanine‑manganese(IV)-oxo (3b). As anticipated, the generated 3 reacted with various organic substrates to yield the oxidized products and further proved to be a competent oxidant via an H218O isotope labeling experiment. The kinetics of oxygen atom transfer (OAT) reactions for these generated 3 species with a range of substrates were examined in CH3CN solutions unless other specified. Overall, the second-order rate constants under pseudo-first-order conditions for 3a and 3b with the same substrates display similar modest reactivity, with the nature of the substrate playing a major role in influencing the reactivity of species 3. The phenol substrates, in particular, reacted the fastest. Of note, second-order rate constants determined for thioanisoles are comparable to those of alkene epoxidations and activated CH bond oxidations. Conventional Hammett analyses of rate constants for substituted styrenes revealed a linear correlation with the σ constant, indicating minimal charge developed at the transition state during the oxidation process. Additionally, the competition product studies and the Hammett correlation analysis further suggested that the manganese(IV)-oxo species observed in those kinetic studies are unlikely to serve as the primary oxidant for the epoxidation reactions catalyzed by manganese(III) phthalocyanine with PhI(OAc)2.

Ferrocene unit substitution in nickel(II) porphyrin(2.1.2.1) induces an extremely low oxygen evolution reaction overpotential

This study reports the synthesis, characterization, structure and the oxygen evolution reaction (OER) performance of ferrocene-substituted nickel(II) porphyrin(2.1.2.1) complexes. The Ni-3 complex, functionalized with two ferrocene units, demonstrates exceptional OER activity, achieving an overpotential of 280 mV at 10 mA cm-2 in alkaline media. This enhancement is ascribed to the electron-rich ferrocene moieties, which act as efficient electron-transfer mediators during catalysis. DFT calculations corroborate these findings, revealing a theoretical overpotential of 0.79 eV for the dual-ferrocene-substituted catalyst. These results underscore the critical role of ferrocene in lowering the overpotential of molecular OER catalysts.

Peripheral Bromination for Strongly Affecting the Structural, Electronic, and Catalytic Properties of Cobalt Corroles

The feasibility of a hydrogen-based economy critically depends on the development of catalysts for the hydrogen evolution reaction (HER) that do not rely on Pt or other noble metals. Contemporary efforts are focused on developing first-row transition metal complexes that will be operative at low overpotentials and catalyze the reaction with high efficacy and turnover rates. We now report a surprisingly strong effect of bromide substituents on the structure, coordination chemistry, electronic spectrum, reduction potentials, and catalytic activity of an already electron-poor cobalt corrole. The six-coordinate cobalt(III) complex of the brominated corrole displays a very nonplanar macrocycle, its axial pyridines are perpendicular to each other, the maxima in the electronic spectrum are red-shifted by almost 70 nm, and it is reduced by 600 mV less negative potentials. It catalyzes the HER from an organic acid in an organic solvent with a very low onset potential of -0.96 V vs. the Fc+/Fc couple and has been used for the preparation of a catalyst-modified cathode to produce hydrogen gas from acidic water with 97% Faradaic efficacy at potentials as low as -0.4 V vs. RHE.

Altering the Catalytic Activity of a Monomeric Cu-Porphyrin Using Self-Assembly To Preorganize a Cubic Architecture

Coordination-driven self-assembly is an efficient strategy for designing polynuclear structures with preorganized catalytic sites. Here, we explore the electrocatalytic behavior of a self-assembled copper porphyrin cube featuring iron nodes (Fe-Cu) using the carbon dioxide reduction reaction (CO2RR) and hydrogen evolution reaction (HER) as model transformations. Ultraviolet-visible (UV-vis) spectroscopy, cyclic voltammetry, spectroelectrochemical experiments, and XPS data revealed that Fe-Cu decompose to regenerate Cu-TAPP under catalytic conditions. The CO2RR versus HER activity of Fe-Cu was tested under heterogeneous conditions to preserve the preorganized cubic arrangement of porphyrins. Upon scission of the Fe-imine nodes, the catalytic activity of the constructed Fe-Cu differs from Cu-TAPP and physical mixtures of Fe(II) and Cu-TAPP. Like free Fe(II) salts, the Fe-Cu-based materials were more selective for the hydrogen evolution reaction (HER), whereas Cu-TAPP generated a mixture of CO2RR products. Spectroscopic methods were used to establish that the Fe-Cu releases Cu-TAPP under reducing conditions, making the shift in selectivity particularly notable since the same active species is present in both systems. This study illustrates the use of self-assembly to preorganize catalytic sites and exploits the limited molecular movement under heterogeneous conditions to preserve a polynuclear microenvironment despite operating under conditions where the assembly does not remain intact.

Asymmetrically tailored catalysts towards electrochemical energy conversion with non-precious materials

Electrocatalytic technologies, such as water electrolysis and metal-air batteries, enable a path to sustainable energy storage and conversion into high-value chemicals. These systems rely on electrocatalysts to drive redox reactions that define key performance metrics such as activity and selectivity. However, conventional electrocatalysts face inherent trade-offs between activity, stability, and scalability particularly due to the reliance on noble metals. Asymmetrically tailored electrocatalysts (ATEs) - systems that are being exploited for non-symmetric designs in composition, size, shape, and coordination environments - offer a path to overcome these barriers. Here, we summarize recent developments in ATEs, focusing on asymmetric coupling strategies employed in designing these systems with non-precious transition metal catalysts (TMCs). We explore tailored asymmetries in composition, size, and coordination environments, highlighting their impact on catalytic performance. We analyze the electrocatalytic mechanisms underlying ATEs with an emphasis on their roles in water-splitting and metal-air batteries. Finally, we discuss the challenges and opportunities in advancing the performance of these technologies through rational ATE designs.

Selective two-electron and four-electron oxygen reduction reactions using Co-based electrocatalysts

The oxygen reduction reaction (ORR) can take place via both four-electron (4e-) and two-electron (2e-) pathways. The 4e- ORR, which produces water (H2O) as the only product, is the key reaction at the cathode of fuel cells and metal-air batteries. On the other hand, the 2e- ORR can be used to electrocatalytically synthesize hydrogen peroxide (H2O2). For the practical applications of the ORR, it is very important to precisely control the selectivity. Understanding structural effects on the ORR provides the basis to control the selectivity. Co-based electrocatalysts have been extensively studied for the ORR due to their high activity, low cost, and relative ease of synthesis. More importantly, by appropriately designing their structures, Co-based electrocatalysts can become highly selective for either the 2e- or the 4e- ORR. Therefore, Co-based electrocatalysts are ideal models for studying fundamental structure-selectivity relationships of the ORR. This review starts by introducing the reaction mechanism and selectivity evaluation of the ORR. Next, Co-based electrocatalysts, especially Co porphyrins, used for the ORR with both 2e- and 4e- selectivity are summarized and discussed, which leads to the conclusion of several key structural factors for ORR selectivity regulation. On the basis of this understanding, future works on the use of Co-based electrocatalysts for the ORR are suggested. This review is valuable for the rational design of molecular catalysts and material catalysts with high selectivity for 4e- and 2e- ORRs. The structural regulation of Co-based electrocatalysts also provides insights into the design and development of ORR electrocatalysts based on other metal elements.

Modulation of Electrocatalytic Overall Water Splitting Performance by β,β'-Functionalization of Ni(II) Porphyrins

In this work, we present a methodology for modulating the HER and OER catalytic activities of nickel porphyrins by β,β'-modification. The syntheses of Ni2 with fused butano ring porphyrin and Ni3 with fused benzo porphyrin were achieved. The catalytic performance of Ni2 was found to be excellent for HER, while Ni3 exhibited superior performance for the OER. The present study demonstrates that the β,β-modification of porphyrins has a significant impact on the reactivity of the metal active site. The results provide new insights into the modulation of the HER and the OER properties by fine-tuning the electronic structure of porphyrins.

In situ uncovering the catalytic cycle of electrochemical and chemical oxygen reduction mediated by an iron porphyrin

As one of the critical reactions in biotransformation and energy conversion processes, the oxygen reduction reaction (ORR) catalyzed by iron porphyrins has been widely explored by electrochemical, spectroscopic, and theoretical methods. However, experimental identification of all proposed intermediates of iron porphyrins in one catalytic cycle is rather challenging in the mechanistic studies of the ORR driven by electrochemical or chemical methods. Herein, we report the application of electrochemical mass spectrometry (EC-MS) and chemical reaction mass spectrometry (CR-MS) to in situ uncover the catalytic cycle of electrochemical and chemical ORRs mediated by an iron porphyrin molecular catalyst. Five crucial iron-oxygen intermediates detected by both EC-MS and CR-MS help to build the whole catalytic cycle and indicate the details of the 4e-/4H+ pathway to produce H2O in the electrochemical and chemical ORRs. By combining in situ MS methods with electrochemical and spectroscopic methods to characterize the intermediates and study the selectivities, this work provides a mechanistic comparison of the electrochemical and chemical ORRs catalyzed by one model iron porphyrin.

Synthesis, spectral and electrochemical studies of electron-deficient nitrile porphyrins and their utilization in selective cyanide sensing

Two series of β-cyano-substituted porphyrins, MTPP(CN)X (where M = 2H, Co(II), Ni(II), Cu(II), and Zn(II) and X = 1 or 2), were synthesized and thoroughly characterized using UV-visible, fluorescence, and NMR spectroscopic techniques, mass spectrometry, and cyclic voltammetry. One of the investigated compounds, CuTPP(CN)2 (2-Cu), was structurally characterized using single crystal X-ray diffraction, and its saddle-shape macrocyclic conformation was revealed. Compared to MTPPs, these compounds showed red-shifts of 7-24 nm and 13-46 nm in the Soret and Qx(0,0) bands, respectively, owing to the resonance and inductive effects of the β-substituents on the porphyrin π-system. The first reduction potentials of H2TPP(CN) (1-H2) and H2TPP(CN)2 (2-H2) showed anodic shifts of 0.25 V and 0.53 V, respectively, compared to H2TPP. This shift was due to the electron-withdrawing nature of the β-substituent, which made these compounds more readily reduced than H2TPP. Additionally, (1-H2) and (2-H2) exhibited significantly higher dipole moments (5.41 D and 9.34 D, respectively) than H2TPP (0.052 D). This increase was attributed to the high-polarized pull effect of the cyano group. Notably, nickel(II) dicyanoporphyrin (2-Ni) facilitated a selective and reversible visual detection of cyanide ions with a detection limit of 4.97 ppm.

Precise Control of Regioselective N1 and N2-Alkylation of Benzotriazoles with α-Diazoacetates by Metalloporphyrin

Regioselective N-alkylation of benzotriazole is highly important to prepare biological materials. Herein, a series of A2B2-typed porphyrin and metalloporphyrin compounds were prepared. Catalytic results disclosed that Ir(III) pentafluorophenyl-substituted porphyrin promoted selective N2-alkylation of benzotriazole, and meanwhile, Fe(III) pyridine-substituted porphyrin accelerated N1-alkylation of benzotriazole. The metalloporphyrin could be used as a linker and inserted into a two-dimensional metal-organic framework; the resultant composite behaved as a heterogeneous catalyst, which could be recycled and reused for at least 6 times without any decrease of activity. This work demonstrates that the introduction of appropriate functional groups into metalloporphyrin at the meso-position is an effective strategy to regulate the reactivity and selectivity of N-substitution of benzotriazoles.

Revealing Significant Electronic Effects on the Oxygen Reduction Reaction with Iron Porphyrins

Understanding electronic effects on catalysis from a mechanism point of view is of fundamental significance but is also challenging. We herein report on electronic effects on the oxygen reduction reaction (ORR) with Fe porphyrins. By using FeIII tetraphenylporphyrin (TPP-Fe) and FeIII tetra(pentafluorophenyl)porphyrin (TPFP-Fe), we showed their different electrochemical and chemical behaviors for ORR. Mechanism studies revealed that the FeIII-superoxo species of TPP-Fe can undergo smooth protonation with trifluoroacetic acid (TFA) but the electron-deficient FeIII-superoxo species of TPFP-Fe cannot be protonated with TFA. The FeIII-superoxo reactivity difference between TPP-Fe and TPFP-Fe is the origin of their different catalytic ORR behaviors.

Manganese(II) Porphyrin and Cumyl Hydroperoxide: An Efficient Catalyst for Aryl-Pentazole C-N Bond Cleavage

The selective cleavage of C-N bonds in N-containing compounds holds significant research value in organic synthesis, particularly for the synthesis of promising polynitrogen species. For instance, the discovery of the cyclo-pentazolate (cyclo-N5 -) anion in 2017 as a result of cleavage of the C-N bond has sparked interest within the field of high energy density materials. However, previous methods using ferrous glycinate and m-chloroperoxybenzoic acid generated the cyclo-N5 - anion in a low yield of 19.5 % after 24 hours, and the mechanism remained unclear. In this study, we developed an efficient catalytic system comprising Mn (II) tetraphenylporphyrin and cumyl hydroperoxide. This system enables the cyclo-N5 - anion to be produced from 3,5-dimethyl-4-hydroxyphenylpentazole in 35.4 % yield in 4 hours. Characterization of Mn(IV)-oxo porphyrins, ⋅CH3, and ⋅C8H8ON5 radicals provides evidence for the mechanism whereby the cyclo-N5 - anion forms. Our study underscores the competitive potential of radical-initiated selective C-N bonds cleavage in N-arylazoles and opens avenues for further exploration in this field.

Carboxyl-Group-Bearing Metal Corroles of Cobalt, Manganese and Copper for Electrocatalytic Hydrogen Evolution

5,15-bis(perfluorophenyl)-10-(4-carboxyphenyl) corrole and its Co(III), Mn(III), and Cu(III) corrole complexes were synthesized. The electrocatalytic hydrogen evolution reaction (HER) of these metal corrole complexes was investigated using different proton sources (AcOH, trifluoroacetic acid, and TsOH) in an organic dimethylformamide solvent. The electrocatalytic HER may proceed through EECC, EECEC, or EEECEC pathways (where E represents electron transfer and C represents proton binding) depending on the acidity and concentration of the proton source used. The Co corrole complex exhibits remarkable hydrogen production performance, achieving a turnover frequency of 201 s-1 and a catalytic efficiency of 1.00. The examined metal corrole complexes also exhibit good HER activity in aqueous solution, with their catalytic activity following an order of 1-Co>1-Cu>1-Mn in both organic and aqueous phases.

Engineering Corrole and Porphyrin-Based Multivariate Metal-Organic Frameworks for Si-H Bond Insertion

As a contracted porphyrin analogue, corrole shows a more acidic and trinegative/triprotic nature compared with porphyrin in the field of coordination chemistry. However, the direct introduction of corrole into a metal-organic framework is quite difficult due to its lower C2V symmetry. Herein, we report the one-pot synthesis of a series of corrole and porphyrin-based multivariate porphyrinic metal-organic frameworks M1(TCPC)@M2-PCN-222 (M1 = CuIII, MnIII, FeIVCl; TCPC = 5,10,15-tris(4-carboxyphenyl) corrole; M2 = CoII, CuII, NiII, FeIIICl) and applied them to the insertion of a Si-H bond with α-diazoacetates. The resultant FeCl(TCPC)@Ni-PCN-222 displayed the highest efficiency with a turnover number of 796 based on the amount of Fe, which could be reused at least 5 times without a negligible loss of activity. Mechanistic studies disclosed that the reactivity of FeCl(TCPC)@Ni-PCN-222 came from the synergistic effect between FeCl(TCPC) and Ni-PCN-222, in which FeCl(TCPC) acted as the active site in the formation of metal-carbene, whereas Ni-PCN-222 helped condense the silane molecules for boosting the insertion of the Si-H bond.

Electrocatalytic hydrogen evolution reaction with a Cu porphyrin bearing meso-CF3 substituents

Cu tetrakis(trifluoromethyl)porphyrin (1) was synthesized and examined as an electrocatalyst for the hydrogen evolution reaction (HER). We showed that 1 is highly efficient for the electrocatalytic HER in acetonitrile with trifluoroacetic acid (TFA) and outperforms Cu tetrakis(pentafluorophenyl)porphyrin (2) by decreasing the onset overpotential by 220 mV. The icat/ip value (icat is the catalytic peak current and ip is the non-catalytic peak current) with 1 is 97, while it is 53 with 2. These results suggest that for Cu porphyrins, meso-CF3 substituents are much more effective than meso-C6F5 substituents to enhance the HER.

Iron Porphyrin-Based Composites for Electrocatalytic Oxygen Reduction Reactions

The oxygen reduction reaction (ORR) is one of the most critical reactions in energy conversion systems, and it facilitates the efficient conversion of chemical energy into electrical energy, which is necessary for modern technology. Developing efficient and cost-effective catalysts for ORRs is crucial for advancing and effectively applying renewable energy technologies such as fuel cells, metal-air batteries, and electrochemical sensors. In recent years, iron porphyrin-based composites have emerged as ideal catalysts for facilitating effective ORRs due to their unique structural characteristics, abundance, advances in synthesis, and excellent catalytic properties, which mimic natural enzymatic systems. However, many articles have focused on reviewing porphyrin-based frameworks or metalloporphyrins in general, necessitating research specifically addressing iron porphyrin. This review discusses iron porphyrin as an effective catalyst in ORRs. It provides a comprehensive knowledge of the application of iron porphyrin-based composites for electrocatalytic ORRs, focusing on their properties, synthesis, structural integration with conductive supports, catalytic mechanism, and efficacy. This review also discusses the challenges of applying iron porphyrin-based composites and provides recommendations to address these challenges.

Gram-Scale, One-Pot Synthesis of a Cofacial Porphyrin Bridged by Ortho-xylene as a Scaffold for Dinuclear Architectures

Herein, we report the reaction between four 1,2-dibromoxylenes and two tetra-3-pyridylporphyrins for the formation of a cofacial porphyrin core spanned by dipyridinium xylene moieties. The metal-free organic nanocage (oNC) was synthesized in one twenty-four h step at a gram-scale with a 91.5% yield. The free base oNC was subsequently metalated with cobalt(II) (Co-oNC), copper(II) (Cu-oNC), and nickel(II) (Ni-oNC) ions to furnish dinuclear complexes that were characterized by mix of mass spectrometry, NMR, EPR, electronic absorption spectroscopy, and for Co-oNC, single-crystal X-ray diffraction. Cofacial cobalt porphyrins are often active as catalysts for the Oxygen Reduction Reaction. Under heterogeneous conditions in water, Co-oNC was 83% selective for the electrocatalytic 4 e-/4 H+ reduction of O2 to H2O, matching homogeneous experiments which revealed consistent selectivity for H2O (88%). This oNC core offers significant advantages over prisms formed by coordination-driven self-assembly: the dipyridnium-xylene coupling can furnish over 1 g of material in a single synthesis and the tethering motif is robust, maintaining a cofacial architecture in acidic and basic solutions. We envision this approach may be generalized to other bis-bromobenzyl building blocks, providing a means to tune metal-metal separation and other structural and electronic properties.

Improving Active Site Local Proton Transfer in Porous Organic Polymers for Boosted Oxygen Electrocatalysis

Improving proton transfer is vital for electrocatalysis with porous materials. Although several strategies are reported to assist proton transfer in channels, few studies are dedicated to improving proton transfer at the local environments of active sites in porous materials. Herein, we report on new Co-corrole-based porous organic polymers (POPs) with improved proton transfer for electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). By tuning the pore sizes and installing proton relays at Co corrole sites, we designed and synthesized POP-2-OH with improved proton transfer both in channels and at local Co active sites. This POP shows remarkable activity for both electrocatalytic ORR with E1/2=0.91 V vs RHE and OER with η10=255 mV. Therefore, this work is significant to present a strategy to improve active site local proton transfer in porous materials and highlight the key role of such structural functionalization in boosting oxygen electrocatalysis.

Structure dependent activation of a Co molecular catalyst through photoinduced electron transfer from CdTe quantum dots

Complexes of quantum dots with molecular catalysts are promising building blocks for photo-catalytic applications. Herein, we report the formation of stable complexes between colloidal CdTe quantum dots (CQDs) and two synthesized structurally different cobalt porphyrin derivatives (CoPp and CoPm, with phenyl and mesityl groups attached at the meso positions, respectively) through a sulfur bridge. Using both spectroscopy and computational methods, we found that the porphyrin adopts a "flat" binding mode on the CQD surface. We observed the coordination of the Co center on the CQD surface. This coordination is stronger for CoPp than for CoPm, resulting in a larger red shift in the absorption band. In addition, we measured a four fold increase in the electron transfer (ET) rate from the CQD to CoPp compared to that with CoPm by a transient absorption study and the charge recombination extended to tens of nanoseconds or longer depending on the structure of the porphyrin periphery. A spectrum measured after the ET points to a loss of coordination between the Co and CQD in a CoP/CQD complex. The experimental results are in agreement with density functional theory calculation results on the CoP complexes on CdTe surfaces, pointing to the porphyrin preferring to align along the CQD surface in the ground state. The change of porphyrin alignment from flat alignment before the excitation to upright alignment after the ET is a likely cause for the extended lifetime of the charge-separated (CS) state, due to an increase in the CS distance. Furthermore, the spectrum of the CS state can be assigned to catalytically active CoIP, proposing the applicability of the complexes in CO2 reduction.

Non-Noble-Metal-Based Electrocatalysts for Acidic Oxygen Evolution Reaction: Recent Progress, Challenges, and Perspectives

The oxygen evolution reaction (OER) plays a pivotal role in diverse renewable energy storage and conversion technologies, including water electrolysis, electrochemical CO2 reduction, nitrogen fixation, and metal-air batteries. Among various water electrolysis techniques, proton exchange membrane (PEM)-based water electrolysis devices offer numerous advantages, including high current densities, exceptional chemical stability, excellent proton conductivity, and high-purity H2. Nevertheless, the prohibitive cost associated with Ir/Ru-based OER electrocatalysts poses a significant barrier to the broad-scale application of PEM-based water splitting. Consequently, it is crucial to advance the development of non-noble metal OER catalysis substance with high acid-activity and stability, thereby fostering their widespread integration into PEM water electrolyzers (PEMWEs). In this review, a comprehensive analysis of the acidic OER mechanism, encompassing the adsorbate evolution mechanism (AEM), lattice oxygen mechanism (LOM) and oxide path mechanism (OPM) is offered. Subsequently, a systematic summary of recently reported noble-metal-free catalysts including transition metal-based, carbon-based and other types of catalysts is provided. Additionally, a comprehensive compilation of in situ/operando characterization techniques is provided, serving as invaluable tools for furnishing experimental evidence to comprehend the catalytic mechanism. Finally, the present challenges and future research directions concerning precious-metal-free acidic OER are comprehensively summarized and discussed in this review.

Structure-Activity Relationships in Oxygen Electrocatalysis

Oxygen electrocatalysis, as the pivotal circle of many green energy technologies, sets off a worldwide research boom in full swing, while its large kinetic obstacles require remarkable catalysts to break through. Here, based on summarizing reaction mechanisms and in situ characterizations, the structure-activity relationships of oxygen electrocatalysts are emphatically overviewed, including the influence of geometric morphology and chemical structures on the electrocatalytic performances. Subsequently, experimental/theoretical research is combined with device applications to comprehensively summarize the cutting-edge oxygen electrocatalysts according to various material categories. Finally, future challenges are forecasted from the perspective of catalyst development and device applications, favoring researchers to promote the industrialization of oxygen electrocatalysis at an early date.

Porphyrin-Confined Supported Ultrasmall Ir Clusters as Oxygen Evolution Catalysts for Water Electrolysis

Metalloporphyrin ligands themselves can participate in the redox process, making them beneficial in promoting the multielectron catalytic process of the oxygen evolution reaction (OER). However, OER catalysts synthesized by traditional chemical strategies face challenges in water electrolysis. We synthesized high-performance and stable alkaline and acidic OER electrocatalysts loaded with ultrasmall iridium clusters by taking advantage of the attraction and confinement of Ir atoms by the Ir-N bonds formed by the porphyrin cavity. The N in the porphyrin cavity forms an Ir-N bond with Ir so that Ir carries a negative charge and attracts Ir atoms to form ultrasmall Ir clusters above the cavity to adjust the electronic structure of the Ir clusters. The resulting catalyst Tpyp-Ir(IrOX) exhibits a small overpotential (242 and 259 mV) at a current density of 10 mA cm-2 in alkaline and acidic conditions and demonstrates good long-term operational stability. In addition, Tpyp-Ir(IrOX) exhibits a higher transition frequency (TOF) (1.69 O2 s-1 at 300 mV) in 1 M KOH, which is 7 times that of Ir/C.

Hierarchical Superhydrophilic/Superaerophobic Ni3S2/VS2 Nanorod-Based Bifunctional Electrocatalyst Supported on Nickel Foam for Overall Urea Electrolysis

The design and preparation of effective nonprecious metal-based catalysts for the urea oxidation reaction (UOR) coupled with the hydrogen evolution reaction (HER) are of great significance to solve both energy shortage and environmental pollution problems. In this study, a novel hierarchical superhydrophilic and superaerophobicity three-dimensional nanorod-like bifunctional catalyst with a heterostructure (Ni3S2/VS2) was prepared on nickel foam via a simple one-step hydrothermal method, serving as an excellent electrocatalyst for both UOR and HER. The formed heterostructure significantly alters the electronic structure, optimizing charge transfer and increasing the number of active sites, which enhances the electrocatalytic performance of Ni3S2/VS2. As a result, this catalyst requires an extremely low potential of 1.396 V at the current density of 100 mA cm-2 for UOR and only 164 mV overpotential at -10 mA cm-2 for HER. Notably, a constructed two-electrode electrolyzer system (Ni3S2/VS2∥Ni3S2/VS2) demonstrates extraordinary activity and long-term stability, achieving a current density of 10 mA cm-2 at a low cell voltage of 1.48 V, which is superior to majority of the reported catalysts. This work demonstrates that the formation of heterostructures can effectively enhance the catalytic activity of nanomaterials toward UOR and HER and provides a feasible strategy for fabricating highly efficient nonprecious metal overall urea electrocatalysts.

Covalent versus noncovalent attachments of [FeFe]‑hydrogenase models onto carbon nanotubes for aqueous hydrogen evolution reaction

In an effort to develop the biomimetic chemistry of [FeFe]‑hydrogenases for catalytic hydrogen evolution reaction (HER) in aqueous environment, we herein report the integrations of diiron dithiolate complexes into carbon nanotubes (CNTs) through three different strategies and compare the electrochemical HER performances of the as-resulted 2Fe2S/CNT hybrids in neutral aqueous medium. That is, three new diiron dithiolate complexes [{(μ-SCH2)2N(C6H4CH2C(O)R)}Fe2(CO)6] (R = N-oxylphthalimide (1), NHCH2pyrene (2), and NHCH2Ph (3)) were prepared and could be further grafted covalently to CNTs via an amide bond (this 2Fe2S/CNT hybrid is labeled as H1) as well as immobilized noncovalently to CNTs via π-π stacking interaction (H2) or via simple physisorption (H3). Meanwhile, the molecular structures of 1-3 are determined by elemental analysis and spectroscopic as well as crystallographic techniques, whereas the structures and morphologies of H1-H3 are characterized by various spectroscopies and scanning electronic microscopy. Further, the electrocatalytic HER activity trend of H1 > H2 ≈ H3 is observed in 0.1 M phosphate buffer solution (pH = 7) through different electrochemical measurements, whereas the degradation processes of H1-H3 lead to their electrocatalytic deactivation in the long-term electrolysis as proposed by post operando analysis. Thus, this work is significant to extend the potential application of carbon electrode materials engineered with diiron molecular complexes as heterogeneous HER electrocatalysts for water splitting to hydrogen.

Bubble-Guidance Breaking Gas Shield for Highly Efficient Overall Water Splitting

Overall water splitting is a promising technology for sustainable hydrogen production, but the primary challenge is removing bubbles from the electrode surface quickly to increase hydrogen production. Inspired by the directional fluid transport properties of natural biological surfaces like Nepenthes peristome and Morpho butterfly's wings, here a strategy is demonstrated to achieve highly efficient overall water splitting by a bubble-guidance electrode, that is, an anisotropic groove-micro/nanostructured porous electrode (GMPE). Gradient groove micro/nanostructures on the GMPE serve as high-speed bubble transmission channels and exhibit superior bubble-guidance capabilities. The synergistic effect of the asymmetric Laplace pressure generated between microscale porous structure and groove patterns and the buoyancy along the groove patterns pushes the produced bubbles directionally to spread, transport, and detach from the electrode surface in time. Moreover, the low adhesive nanosheet arrays are beneficial to reduce bubble size and increase bubble release frequency, which cooperatively improve mass transfer with the microscale structure. Notably, GMPE outperforms planar-micro/nanostructured porous electrode (PMPE) in hydrogen/oxygen evolution reactions, with GMPE||GMPE showing better water splitting performance than commercially available RuO2||20 wt.% Pt/C. This work improves electrodes for better mass transfer and kinetics in electrochemical reactions at solid-liquid-gas interfaces, offering insight for designing and preparing gas-involved photoelectrochemical electrodes.

Structural modification of nickel tetra(thiocyano)corroles during electrochemical water oxidation

In this study, we present two fully characterized nickel tetrathiocyanocorroles, representing a novel class of 3d-metallocorroles. These nickel(II) ions form square planar complexes, exhibiting a d8-electronic configuration. These anionic complexes are stabilized by the electron-withdrawing SCN groups on the bipyrrole unit of the corrole. The reduced aromaticity in these anionic nickel(II) corrole complexes is evidenced by single crystal X-ray diffraction (XRD) data and a markedly altered absorption profile, with stronger Q bands compared to Soret bands. Notably, the UV-Vis and electrochemical data exhibit significant differences from previously reported nickel(II) corrole radical cation and nickel(II) porphyrin complexes. While these electrochemical data bear a resemblance to those of the anionic nickel(II) corrole by Gross et al., the UV-Vis data show substantial distinctions. Additionally, we explore the utilization of nickel(II)-corrole@CC (where CC denotes carbon cloth) as an electrocatalyst for the oxygen evolution reaction (OER) in an alkaline medium. During electrochemical water oxidation, the molecular catalyst is partially converted to nickel (oxy)hydroxide, Ni(O)OH. The structure reveals the coexistence of the molecular complex and Ni(O)OH in the active catalyst, achieving a turnover frequency (TOF) of 3.32 × 10-2 s-1. The synergy between the homogeneous and heterogeneous phases improves the OER activity, providing more active sites and edge sites and enhancing interfacial charge transfer.

A cobalt porphyrin-bridged covalent triazine polymer-derived electrode for efficient hydrogen production

Pronounced compositional regulation and microstructure evolution have a significant influence on hydrogen electrocatalysis. Herein, for the first time, we demonstrate that N,Co-codoped carbon supported Co5.47N nanoparticles (Co5.47N/N,Co-C-800) derived from a nitrogen-rich porphyrin-bridged covalent triazine polymer (CoTAPPCC) are an effective electrocatalyst for the HER in 1.0 M KOH when compared to CoCo2O4/N,Co-C-900 (pyrolysis at 900 °C) and CoO/N,Co-C-1000 (pyrolysis at 1000 °C). The structural and morphological variations of CoTAPPCC at different heat treatment temperatures were investigated through various spectroscopic techniques. We reveal that electrocatalytic HER activity is temperature- and component-dependent. The overpotentials for Co5.47N/N,Co-C-800 to reach current densities of 10 and 100 mA cm-2 were determined to be 76 and 229 mV, respectively, outperforming many other state-of-the-art HER electrocatalysts. This work also sheds light on the influence of calcination temperature on the electrocatalytic HER of final samples.

The "Pull Effect" of a Hanging ZnII on Improving the Four-Electron Oxygen Reduction Selectivity with Co Porphyrin

Due to the challenge of cleaving O-O bonds at single Co sites, mononuclear Co complexes typically show poor selectivity for the four-electron (4e-) oxygen reduction reaction (ORR). Herein, we report on selective 4e- ORR catalyzed by a Co porphyrin with a hanged ZnII ion. Inspired by Cu/Zn-superoxide dismutase, we designed and synthesized 1-CoZn with a hanging ZnII at the second sphere of a Co porphyrin. Complex 1-CoZn is much more effective than its Zn-lacking analogues to catalyze the 4e- ORR in neutral aqueous solutions, giving an electron number of 3.91 per O2 reduction. With spectroscopic studies, the hanging ZnII was demonstrated to be able to facilitate the electron transfer from CoII to O2, through an electronic "pull effect", to give CoIII-superoxo. Theoretical studies further suggested that this "pull effect" plays crucial roles in assisting O-O bond cleavage. This work is significant to present a new strategy of hanging a ZnII to improve O2 activation and O-O bond cleavage.

Constructing Co4(SO4)4 Clusters within Metal-Organic Frameworks for Efficient Oxygen Electrocatalysis

Multinuclear metal clusters are ideal candidates to catalyze small molecule activation reactions involving the transfer of multiple electrons. However, synthesizing active metal clusters is a big challenge. Herein, on constructing an unparalleled Co4(SO4)4 cluster within porphyrin-based metal-organic frameworks (MOFs) and the electrocatalytic features of such Co4(SO4)4 clusters for the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is reported. The reaction of CoII sulfate and metal complexes of tetrakis(4-pyridyl)porphyrin under solvothermal conditions afforded Co4-M-MOFs (M═Co, Cu, and Zn). Crystallographic studies revealed that these Co4-M-MOFs have the same framework structure, having the Co4(SO4)4 clusters connected by metalloporphyrin units through Co─Npyridyl bonds. In the Co4(SO4)4 cluster, the four CoII ions are chemically and symmetrically equivalent and are each coordinated with four sulfate O atoms to give a distorted cube-like structure. Electrocatalytic studies showed that these Co4-M-MOFs are all active for electrocatalytic OER and ORR. Importantly, by regulating the activity of the metalloporphyrin units, it is confirmed that the Co4(SO4)4 cluster is active for oxygen electrocatalysis. With the use of Co porphyrins as connecting units, Co4-Co-MOF displays the highest electrocatalytic activity in this series of MOFs by showing a 10 mA cm-2 OER current density at 357 mV overpotential and an ORR half-wave potential at 0.83 V versus reversible hydrogen electrode (RHE). Theoretical studies revealed the synergistic effect of two proximal Co atoms in the Co4(SO4)4 cluster in OER by facilitating the formation of O─O bonds. This work is of fundamental significance to present the construction of Co4(SO4)4 clusters in framework structures for oxygen electrocatalysis and to demonstrate the cooperation between two proximal Co atoms in such clusters during the O─O bond formation process.

Synthesis of π-Ring-Fused Porphyrin(2.1.1.1)s and Their Rh(I) Complexes

Stable and simplest expanded porphyrins, π-ring-fused porphyrin(2.1.1.1)s and Rh(I) complexes, have been obtained for the first time. Two free bases show chair-shaped molecular conformations, as if reassembled by the halves of porphyrin(1.1.1.1) and porphyrin(2.1.2.1). The insertion of Rh(CO)2 groups induced more twisted molecular conformations. The NMR spectra, X-ray structure, NICS, and ACID of obtained molecules all support their nonaromaticity due to chair-shaped molecular conformations. The protonated and Rh(I) coordination of porphyrin(2.1.1.1)s process red-shifted absorptions in the NIR region.

Porphyrin Atropisomerism as a Molecular Engineering Tool in Medicinal Chemistry, Molecular Recognition, Supramolecular Assembly, and Catalysis

Porphyrin atropisomerism, which arises from restricted σ-bond rotation between the macrocycle and a sufficiently bulky substituent, was identified in 1969 by Gottwald and Ullman in 5,10,15,20-tetrakis(o-hydroxyphenyl)porphyrins. Henceforth, an entirely new field has emerged utilizing this transformative tool. This review strives to explain the consequences of atropisomerism in porphyrins, the methods which have been developed for their separation and analysis and present the diverse array of applications. Porphyrins alone possess intriguing properties and a structure which can be easily decorated and molded for a specific function. Therefore, atropisomerism serves as a transformative tool, making it possible to obtain even a specific molecular shape. Atropisomerism has been thoroughly exploited in catalysis and molecular recognition yet presents both challenges and opportunities in medicinal chemistry.

Covalent Bonding of Salen Metal Complexes with Pyrene Chromophores to Porous Polymers for Photocatalytic Hydrogen Evolution

The development of low-cost and efficient photocatalysts to achieve water splitting to hydrogen (H2) is highly desirable but remains challenging. Herein, we design and synthesize two porous polymers (Co-Salen-P and Fe-Salen-P) by covalent bonding of salen metal complexes and pyrene chromophores for photocatalytic H2 evolution. The catalytic results demonstrate that the two polymers exhibit excellent catalytic performance for H2 generation in the absence of additional noble-metal photosensitizers and cocatalysts. Particularly, the H2 generation rate of Co-Salen-P reaches as high as 542.5 μmol g-1 h-1, which is not only 6 times higher than that of Fe-Salen-P but also higher than a large amount of reported Pt-assisted photocatalytic systems. Systematic studies show that Co-Salen-P displays faster charge separation and transfer efficiencies, thereby accounting for the significantly improved photocatalytic activity. This study provides a facile and efficient way to fabricate high-performance photocatalysts for H2 production.

Directly-Fused Ni(II)Porphyrin Conjugated Polymers with Blocked meso-Positions: Impact on Electrocatalytic Properties

The oxidative coupling reaction of two Ni(II) porphyrins meso-substituted with three and four phenyl groups, Ni(II) 5,10,15-(triphenyl)porphyrin (NiPh3P) and Ni(II) 5,10,15,20-(tetraphenyl)porphyrin (NiPh4P) respectively, was investigated in a oxidative chemical vapor deposition (oCVD) process. Irrespective of the number of meso-substituents, high-resolution mass spectrometry evidences the formation of oligomeric species containing up to five porphyrin units. UV-Vis-NIR and XPS analyses of the oCVD films highlighted a strong dependence of the intermolecular coupling reaction with the substrate temperature. Specifically, higher substrate temperatures yield lowering of valence band maxima and reduction of the band gap. The formation of conjugated polymeric assemblies results in increased conductivities as compared to their sublimed counterparts. Yet, electrocatalytic measurements exhibit water oxidation onset overpotentials (308 mV for pNiPh3P and 343 mV for pNiPh4P) comparatively higher than the onset overpotential measured for the oCVD film from Ni(II) 5,15-(diphenyl)porphyrin (pNiPh2P), i. e. 283 mV. Although DFT and comparative oCVD studies suggest the formation of directly fused porphyrins involving 'phenyl-mediated' and β-β linkages when reacting tetra-meso-substituted porphyrins, the present findings highlight that multiple direct fusion (β-β/meso-meso/β-β or meso-β/β-meso) is essential for Ni(II) porphyrin-based conjugated polymers to enable a dinuclear radical oxo-coupling operating mechanism for water oxidation at low overpotential and durable catalytic activity.

Electrifying oxidation of ethylene and propylene

Ethylene and propylene, as essential precursors in the chemical industry, have been playing a pivotal role in the production of various value-added chemicals that find wide applications in diverse sectors, such as polymer synthesis, lithium-ion battery electrolytes, antifreeze agents and pharmaceuticals. Nevertheless, traditional methods for olefin functionalization including chlorohydrination and epoxidation involve energy-intensive steps and environment-detrimental by-products. In contrast, electrocatalysis is emerging as a promising and sustainable approach for olefin oxidation via utilizing renewable electricity. Recent advancements in energy storage and conversion technologies have intensified the research efforts toward designing efficient electrocatalysts for the selective oxidation of ethylene and propylene, highlighting the shift towards more sustainable production methods. Herein, we summarize recent progress in the electrocatalytic oxidation of ethylene and propylene, focusing on achievement in catalyst design, reaction system selection and mechanism exploration. We figure out the advantages of different oxidation methods for improved performance and discuss the various types of catalysts like noble metals, non-noble metals, metal oxides and carbon-based materials, in facilitating the electrochemical oxidation of ethylene and propylene. Finally, we also provide an overview of current challenges and problems requiring further works.

Linker Mediated Electronic-State Manipulation of Conjugated Organic Polymers Enabling Highly Efficient Oxygen Reduction

Conjugated polymers with tailorable composition and microarchitecture are propitious for modulating catalytic properties and deciphering inherent structure-performance relationships. Herein, we report a facile linker engineering strategy to manipulate the electronic states of metallophthalocyanine conjugated polymers and uncover the vital role of organic linkers in facilitating electrocatalytic oxygen reduction reaction (ORR). Specifically, a set of cobalt phthalocyanine conjugated polymers (CoPc-CPs) wrapped onto carbon nanotubes (denoted CNTs@CoPc-CPs) are judiciously crafted via in situ assembling square-planar cobalt tetraaminophthalocyanine (CoPc(NH2)4) with different linear aromatic dialdehyde-based organic linkers in the presence of CNTs. Intriguingly, upon varying the electronic characteristic of organic linkers from terephthalaldehyde (TA) to 2,5-thiophenedicarboxaldehyde (TDA) and then to thieno/thiophene-2,5-dicarboxaldehyde (bTDA), their corresponding CNTs@CoPc-CPs exhibit gradually improved electrocatalytic ORR performance. More importantly, theoretical calculations reveal that the charge transfer from CoPc units to electron-withdrawing linkers (i.e., TDA and bTDA) drives the delocalization of Co d-orbital electrons, thereby downshifting the Co d-band energy level. Accordingly, the active Co centers with more positive valence state exhibit optimized binding energy toward ORR-relevant intermediates and thus a balanced adsorption/desorption pathway that endows significant enhancement in electrocatalytic ORR. This work demonstrates a molecular-level engineering route for rationally designing efficient polymer catalysts and gaining insightful understanding of electrocatalytic mechanisms.

The mechanism of water oxidation using transition metal-based heterogeneous electrocatalysts

The water oxidation reaction, a crucial process for solar energy conversion, has garnered significant research attention. Achieving efficient energy conversion requires the development of cost-effective and durable water oxidation catalysts. To design effective catalysts, it is essential to have a fundamental understanding of the reaction mechanisms. This review presents a comprehensive overview of recent advancements in the understanding of the mechanisms of water oxidation using transition metal-based heterogeneous electrocatalysts, including Mn, Fe, Co, Ni, and Cu-based catalysts. It highlights the catalytic mechanisms of different transition metals and emphasizes the importance of monitoring of key intermediates to explore the reaction pathway. In addition, advanced techniques for physical characterization of water oxidation intermediates are also introduced, for the purpose of providing information for establishing reliable methodologies in water oxidation research. The study of transition metal-based water oxidation electrocatalysts is instrumental in providing novel insights into understanding both natural and artificial energy conversion processes.

Why does the orientation of azulene affect the two-photon activity of a porphyrinoid-azulene system?

Attaching a dipolar molecule in a symmetric system induces a major change in the electronic structure, which may be reflected as the enhancement of the optical and charge-transfer properties of the combined system as compared to the pristine ones. Furthermore, the orientation of the dipolar molecule may also affect the said properties. This idea is explored in this work by taking porphyrinoid molecules as the pristine systems. We attached azulene, a dipolar molecule, at various positions of five porphyrinoid cores and studied the effect on charge-transfer and one- and two-photon absorption properties using the state-of-the-art RICC2 method. The attachment of azulene produces two major effects - firstly it introduces asymmetry in the system and, secondly, being dipolar, it makes the resultant molecule dipolar/quadrupolar. Porphyrin, N-confused porphyrin, sub-porphyrin, sapphyrin, and hexaphyrin are used as core porphyrinoid systems. The change in charge-transfer has been studied using the orbital analysis and charge-transfer distance parameter for the first five singlet states of the systems. The effect of orientation of azulene on the said properties is also explored. The insights gained from our observations are explored further at the dipole and transition dipole moment levels using a three-state model.

Enhanced Reactivities of Iron(IV)-Oxo Porphyrin Species in Oxidation Reactions Promoted by Intramolecular Hydrogen-Bonding

High-valent iron-oxo species are one of the common intermediates in both biological and biomimetic catalytic oxidation reactions. Recently, hydrogen-bonding (H-bonding) has been proved to be critical in determining the selectivity and reactivity. However, few examples have been established for mechanistic insights into the H-bonding effect. Moreover, intramolecular H-bonding effect on both C-H activation and oxygen atom transfer (OAT) reactions in synthetic porphyrin model system has not been investigated yet. In this study, a series of heme-containing iron(IV)-oxo porphyrin species with or without intramolecular H-bonding are synthesized and characterized. Kinetic studies revealed that intramolecular H-bonding can significantly enhance the reactivity of iron(IV)-oxo species in OAT, C-H activation, and electron-transfer reactions. This unprecedented unified H-bonding effect is elucidated by theoretical calculations, which showed that intramolecular H-bonding interactions lower the energy of the anti-bonding orbital of iron(IV)-oxo porphyrin species, resulting in the enhanced reactivities in oxidation reactions irrespective of the reaction type. To the best of the knowledge, this is the first extensive investigation on the intramolecular H-bonding effect in heme system. The results show that H-bonding interactions have a unified effect with iron(IV)-oxo porphyrin species in all three investigated reactions.

Coordination polymer derived Fe-N-C electrocatalysts with high performance for the oxygen reduction reaction in Zn-air batteries

Developing high performance noble-metal-free electrocatalysts as an alternative to Pt-based catalysts for the oxygen reduction reaction (ORR) in energy conversion devices is highly desirable. We report herein the preparation of a coordination-polymer (CP)-derived Fe/CP/C composite as an electrocatalyst for the ORR with excellent activity and stability both in solution and in Zn-air batteries. The Fe/CP/C catalyst was obtained from the pyrolysis of an iron porphyrin Fe(TPP)Cl (5,10,15,20-tetraphenyl-21H,23H-porphyrin iron(III) chloride) grafted Zn-coordination polymer with dangling functional groups 4,4'-oxybisbenzoic acid and 4,4'-bipyridine ligands. The Fe/CP/C catalyst showed much higher ORR activity with a half-wave potential (E1/2) of 0.90 V (vs. RHE) than the Fe/C catalyst (E1/2 = 0.85 V) derived from the carbon-black-supported Fe porphyrins in 0.1 M KOH solution. When Fe/CP/C was used as the cathode electrocatalyst in Zn-air batteries (ZABs), the ZABs achieved a significantly higher open circuit voltage (OCV = 1.43 V) and maximum power density (Pmax = 142.8 mW cm-2) compared with Fe/C (OCV = 1.38 V, Pmax = 104.5 mW cm-2) and commercial 20 wt% Pt/C (OCV = 1.41 V, Pmax = 117.6 mW cm-2). Using dangling functional groups in CP to increase the loading efficiency of iron porphyrins offered a facile method to prepare high-performance noble-metal-free electrocatalysts for the ORR, which may provide promising applications to energy conversion devices.

Covalent Tethering of Cobalt Porphyrins on Phenolic Resins for Electrocatalytic Oxygen Reduction and Evolution Reactions

Using functionalized supporting materials for the immobilization of molecular catalysts is an appealing strategy to improve the efficiency of molecular electrocatalysis. Herein, we report the covalent tethering of cobalt porphyrins on phenolic resins (PR) for improved electrocatalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). A cobalt porphyrin bearing an alkyl bromide substituent was covalently tethered on phenolic resins, through the substitution reaction of alkyl bromides with phenolic hydroxyl groups, to afford molecule-engineered phenolic resins (Co-PR). The resulted Co-PR was efficient for electrocatalytic ORR and OER by displaying an ORR half-wave potential of E1/2=0.78 V versus RHE and an OER overpotential of 420 mV to get 10 mA/cm2 current density. We propose that the many residual phenolic hydroxyl groups on PR will surround the tethered Co porphyrin and play critical roles in facilitating proton and electron transfers. Importantly, Co-PR outperformed unmodified PR and PR loaded with Co porphyrins through simple physical adsorption (termed Co@PR). The zinc-air battery assembled using Co-PR displayed a performance comparable to that using Pt/C+Ir/C. This work is significant to present phenolic resins as a functionalized material to support molecular electrocatalysts and demonstrate the strategy to improve molecular electrocatalysis with the use of phenolic resin residues.

Switching Electrocatalytic Hydrogen Evolution Pathways through Electronic Tuning of Copper Porphyrins

The electronic structure of metal complexes plays key roles in determining their catalytic features. However, controlling electronic structures to regulate reaction mechanisms is of fundamental interest but has been rarely presented. Herein, we report electronic tuning of Cu porphyrins to switch pathways of the hydrogen evolution reaction (HER). Through controllable and regioselective β-oxidation of Cu porphyrin 1, we synthesized analogues 2-4 with one or two β-lactone groups in either a cis or trans configuration. Complexes 1-4 have the same Cu-N4 core site but different electronic structures. Although β-oxidation led to large anodic shifts of reductions, 1-4 displayed similar HER activities in terms of close overpotentials. With electrochemical, chemical and theoretical results, we show that the catalytically active species switches from a CuI species for 1 to a Cu0 species for 4. This work is thus significant to present mechanism-controllable HER via electronic tuning of catalysts.

Evolution in the Design of Water Oxidation Catalysts with Transition-Metals: A Perspective on Biological, Molecular, Supramolecular, and Hybrid Approaches

Increased demand for a carbon-neutral sustainable energy scheme augmented by climatic threats motivates the design and exploration of novel approaches that reserve intermittent solar energy in the form of chemical bonds in molecules and materials. In this context, inspired by biological processes, artificial photosynthesis has garnered significant attention as a promising solution to convert solar power into chemical fuels from abundantly found H2O. Among the two redox half-reactions in artificial photosynthesis, the four-electron oxidation of water according to 2H2O → O2 + 4H+ + 4e- comprises the major bottleneck and is a severe impediment toward sustainable energy production. As such, devising new catalytic platforms, with traditional concepts of molecular, materials and biological catalysis and capable of integrating the functional architectures of the natural oxygen-evolving complex in photosystem II would certainly be a value-addition toward this objective. In this review, we discuss the progress in construction of ideal water oxidation catalysts (WOCs), starting with the ingenuity of the biological design with earth-abundant transition metal ions, which then diverges into molecular, supramolecular and hybrid approaches, blurring any existing chemical or conceptual boundaries. We focus on the geometric, electronic, and mechanistic understanding of state-of-the-art homogeneous transition-metal containing molecular WOCs and summarize the limiting factors such as choice of ligands and predominance of environmentally unrewarding and expensive noble-metals, necessity of high-valency on metal, thermodynamic instability of intermediates, and reversibility of reactions that create challenges in construction of robust and efficient water oxidation catalyst. We highlight how judicious heterogenization of atom-efficient molecular WOCs in supramolecular and hybrid approaches put forth promising avenues to alleviate the existing problems in molecular catalysis, albeit retaining their fascinating intrinsic reactivities. Taken together, our overview is expected to provide guiding principles on opportunities, challenges, and crucial factors for designing novel water oxidation catalysts based on a synergy between conventional and contemporary methodologies that will incite the expansion of the domain of artificial photosynthesis.

Protein3D: Enabling analysis and extraction of metal-containing sites from the Protein Data Bank with molSimplify

Metalloenzymes catalyze a wide range of chemical transformations, with the active site residues playing a key role in modulating chemical reactivity and selectivity. Unlike smaller synthetic catalysts, a metalloenzyme active site is embedded in a larger protein, which makes interrogation of electronic properties and geometric features with quantum mechanical calculations challenging. Here we implement the ability to fetch crystallographic structures from the Protein Data Bank and analyze the metal binding sites in the program molSimplify. We show the usefulness of the newly created protein3D class to extract the local environment around non-heme iron enzymes containing a two histidine motif and prepare 372 structures for quantum mechanical calculations. Our implementation of protein3D serves to expand the range of systems molSimplify can be used to analyze and will enable high-throughput study of metal-containing active sites in proteins.

Unraveling Meso-Substituent Steric Effects on the Mechanism of Hydrogen Evolution Reaction in NiII Porphyrin Hydrides Using DFT Method

Substituents at the meso-site of metalloporphyrins profoundly influence the hydrogen evolution reaction (HER) mechanism. This study employs density functional theory (DFT) to computationally analyze NiII-porphyrin and its hydrides derived from tetrakis(pentafluorophenyl)porphyrin molecules, presenting stereoisomers in ortho- or para-positions. The results reveal that the spatial resistance effect of meso-substituted groups at the ortho- and para-positions induces significant changes in Ni-N bond lengths, angles, and reaction dynamics. For ortho-position substituents forming complex I, a favorable 88.88 ų spherical space was created, facilitating proton coordination and the formation of H2 molecules; conversely, para-position substituents forming complex II impeded H2 formation until bimolecular complexes arose. Molecular dynamics (MD) analysis and comparison were conducted on the intermediation products of I-H2 and (II-H)2, focusing on the configuration and energy changes. In the I-H2 products, H2 molecules underwent separation after 150 fs and overcame the 2.2 eV energy barrier. Subsequently, significant alterations in the spatial structure were observed as complex I deformed. In the case of (II-H)2, it was influenced by the distinctive "sandwich" configuration; the spatial structure necessitated overcoming a 6.7 eV energy barrier for H2 detachment and a process observed after 2400 fs.

Nitrogen-Rich Conjugated Microporous Polymers with Improved Cobalt(II) Density for Highly Efficient Electrocatalytic Oxygen Evolution

Developing efficient oxygen evolution catalysts (OECs) made from earth-abundant elements is extremely important since the oxygen evolution reaction (OER) with sluggish kinetics hinders the development of many energy-related electrochemical devices. Herein, an efficient strategy is developed to prepare conjugated microporous polymers (CMPs) with abundant and uniform coordination sites by coupling the N-rich organic monomer 2,4,6-tris(5-bromopyrimidin-2-yl)-1,3,5-triazine (TBPT) with Co(II) porphyrin. The resulting CMP-Py(Co) is further metallized with Co2+ ions to obtain CMP-Py(Co)@Co. Structural characterization results reveal that CMP-Py(Co)@Co has higher Co2+ content (12.20 wt %) and affinity toward water compared with CMP-Py(Co). Moreover, CMP-Py(Co)@Co exhibits an excellent OER activity with a low overpotential of 285 mV vs RHE at 10 mA cm-2 and a Tafel slope of 80.1 mV dec-1, which are significantly lower than those of CMP-Py(Co) (335 mV vs RHE and 96.8 mV dec-1). More interestingly, CMP-Py(Co)@Co outperforms most reported porous organic polymer-based OECs and the benchmark RuO2 catalyst (320 mV vs RHE and 87.6 mV dec-1). Additionally, Co2+-free CMP-Py(2H) has negligible OER activity. Thereby, the enhanced OER activity of CMP-Py(Co)@Co is attributed to the incorporation of Co2+ ions leading to rich active sites and enlarged electrochemical surface areas. Density functional theory (DFT) calculations reveal that Co2+-TBPT sites have higher activity than Co2+-porphyrin sites for the OER. These results indicate that the introduction of rich active metal sites in stable and conductive CMPs could provide novel guidance for designing efficient OECs.

Engineering organic polymers as emerging sustainable materials for powerful electrocatalysts

Cost-effective and high-efficiency catalysts play a central role in various sustainable electrochemical energy conversion technologies that are being developed to generate clean energy while reducing carbon emissions, such as fuel cells, metal-air batteries, water electrolyzers, and carbon dioxide conversion. In this context, a recent climax in the exploitation of advanced earth-abundant catalysts has been witnessed for diverse electrochemical reactions involved in the above mentioned sustainable pathways. In particular, polymer catalysts have garnered considerable interest and achieved substantial progress very recently, mainly owing to their pyrolysis-free synthesis, highly tunable molecular composition and microarchitecture, readily adjustable electrical conductivity, and high stability. In this review, we present a timely and comprehensive overview of the latest advances in organic polymers as emerging materials for powerful electrocatalysts. First, we present the general principles for the design of polymer catalysts in terms of catalytic activity, electrical conductivity, mass transfer, and stability. Then, the state-of-the-art engineering strategies to tailor the polymer catalysts at both molecular (i.e., heteroatom and metal atom engineering) and macromolecular (i.e., chain, topology, and composition engineering) levels are introduced. Particular attention is paid to the insightful understanding of structure-performance correlations and electrocatalytic mechanisms. The fundamentals behind these critical electrochemical reactions, including the oxygen reduction reaction, hydrogen evolution reaction, CO2 reduction reaction, oxygen evolution reaction, and hydrogen oxidation reaction, as well as breakthroughs in polymer catalysts, are outlined as well. Finally, we further discuss the current challenges and suggest new opportunities for the rational design of advanced polymer catalysts. By presenting the progress, engineering strategies, insightful understandings, challenges, and perspectives, we hope this review can provide valuable guidelines for the future development of polymer catalysts.

P-doped Mn0.5Cd0.5S coupled with cobalt porphyrin as co-catalyst for the photocatalytic water splitting without using sacrificial agents

Photocatalytic water splitting over semiconductors is an important approach to solve the energy demand of human beings. Most photocatalytic H2 generation reactions are conducted in the presence of sacrificial agent. However, the use of sacrificial reagents increases the cost of hydrogen generation. Realizing photocatalytic water splitting for hydrogen production without the addition of sacrificial agents is a major challenge for photocatalysts. The porphyrin MTCPPOMe and P doped MnxCd1-xS make a significant contribution in facilitating the MnxCd1-xS photocatalytic pure water splitting to H2 reaction. Herein, a novel MTCPPOMe/P-MnxCd1-xS (M = 2H, Fe, Co, Ni) composite catalyst which can efficiently split pure water without using sacrificial agents is developed. As a result, the H2 generation rate of CoTCPPOMe/P-Mn0.5Cd0.5S is as high as 2.10 μmol h-1, which is 9.1 and 4.2 times higher than that of Mn0.5Cd0.5S (MCS) and P-Mn0.5Cd0.5S (P-MCS), respectively. P doped MnxCd1-xS inhibits the recombination of photogenerated carriers, and introduction of MTCPPOMe as co-catalyst enhances the reduction capacity. In summary, an efficient and economical photocatalystis prepared for pure water splitting to prepare hydrogen.

Bifunctional porphyrin-based metal-organic polymers for electrochemical water splitting

Electrochemical water splitting offers the potential for environmentally friendly hydrogen and oxygen gas generation. Here, we present the synthesis, characterization, and electrochemical analyses of four organic polymers where metalloporphyrins are the active center nodes. These materials were obtained from the polymerization reaction of poly(p-phenylene terephtalamide) (PPTA) with the respective amino-functionalized metalloporphyrins, where M = Fe, 1; Co, 2; Ni, 3; Cu, 4. Scanning and transmission electron microscopy images (SEM and TEM) show that these polymers exhibit a layer-type morphology, which is attributed to hydrogen bonding and π-π stacking between the metalloporphyrin nodes. The synthesized materials were characterized by X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), UV-Vis spectroscopy, and Fourier-transform infrared spectroscopy (FT-IR). Among the materials studied, the cobalt-based polymer, 2, demonstrates a bifunctional electrocatalytic activity for oxygen (OER) and hydrogen (HER) evolution reactions with overpotentials (η10) of 337 mV and 435 mV, respectively. The Fe, 1, and Ni, 2, polymers are less active for HER with maximum current densities (jmax) of 12.6 and 19.1 mA cm-2 and η10 678 mV, 644 mV. Polymer 2 achieves a jmax of 37.7 mA cm-2 for HER and 133 mA cm-2 for OER. The copper-based material, 4, on the other hand, shows selectivity towards HER with an overpotential (η) of 436 mV and a maximum current density (j) of 45.5 mA cm-2. The bifunctional electrocatalytic performance was tested in the overall water-splitting setup, where polymer 2 requires a cell voltage of 1.64 V at 10 mA cm-2. This work presents a novel approach to heterogenized molecular systems, providing materials with exceptional structural characteristics and enhanced electrocatalytic capabilities.

Identification of a Durability Descriptor for Molecular Oxygen Reduction Reaction Catalysts

The development of durable platinum-group-metal-free oxygen reduction reaction (ORR) catalysts is a key research direction for enabling the wide use of fuel cells. Here, we use a combination of experimental measurements and density functional theory calculations to study the activity and durability of seven iron-based metallophthalocyanine (MPc) ORR catalysts that differ only in the identity of the substituent groups on the MPcs. While the MPcs show similar ORR activity, their durabilities as measured by the current decay half-life differ greatly. We find that the energy difference between the hydrogenated intermediate structure and the final demetalated structure (ΔEdemetalation) of the MPcs is linearly related to the degradation reaction barrier energy. Comparison to the degradation data for the previously studied metallocorrole systems suggested that ΔEdemetalation also serves as a descriptor for the corrole systems and that the high availability of protons at the active site due to the COOH group of the o-corrole decreases the durability.