Electrically Responsive Surfaces: Experimental and Theoretical Investigations

Artificial Bone Materials for Infected Bone Defects: Advances in Antimicrobial Functions

Infected bone defects, caused by bacterial contamination following disease or injury, result in the partial loss or destruction of bone tissue. Traditional bone transplantation and other clinical approaches often fail to address the therapeutic complexities of these conditions effectively. In recent years, advanced biomaterials have attracted significant attention for their potential to enhance treatment outcomes. This review explores the pathogenic mechanisms underlying infected bone defects, including biofilm formation and bacterial internalization into bone cells, which allow bacteria to evade the host immune system. To control bacterial infection and facilitate bone repair, we focus on antibacterial materials for bone regeneration. A detailed introduction is given on intrinsically antibacterial materials (e.g., metal alloys, oxide materials, carbon-based materials, hydroxyapatite, chitosan, and Sericin). The antibacterial functionality of bone repair materials can be enhanced through strategies such as the incorporation of antimicrobial ions, surface modification, and the combined use of multiple materials to treat infected bone defects. Key innovations discussed include biomaterials that release therapeutic agents, functional contact biomaterials, and bioresponsive materials, which collectively enhance antibacterial efficacy. Research on the clinical translation of antimicrobial bone materials has also facilitated their practical application in infection prevention and bone healing. In conclusion, advancements in biomaterials provide promising pathways for developing more biocompatible, effective, and personalized therapies to reconstruct infected bone defects.

External Stimuli-Responsive Strategies for Surface Modification of Orthopedic Implants: Killing Bacteria and Enhancing Osteogenesis

Bacterial infection and insufficient osteogenic activity are the main causes of orthopedic implant failure. Conventional surface modification methods are difficult to meet the requirements for long-term implant placement. In order to better regulate the function of implant surfaces, especially to improve both the antibacterial and osteogenic activity, external stimuli-responsive (ESR) strategies have been employed for the surface modification of orthopedic implants. External stimuli act as "smart switches" to regulate the surface interactions with bacteria and cells. The balance between antibacterial and osteogenic capabilities of implant surfaces can be achieved through these specific ESR manifestations, including temperature changes, reactive oxygen species production, controlled release of bioactive molecules, controlled release of functional ions, etc. This Review summarizes the recent progress on different ESR strategies (based on light, ultrasound, electric, and magnetic fields) that can effectively balance antibacterial performance and osteogenic capability of orthopedic implants. Furthermore, the current limitations and challenges of ESR strategies for surface modification of orthopedic implants as well as future development direction are also discussed.

Wetting of a Dynamically Patterned Surface Is a Time-Dependent Matter

In nature and many technological applications, aqueous solutions are in contact with patterned surfaces, which are dynamic over time scales spanning from ps to μs. For instance, in biology, exposed polar and apolar residues of biomolecules form a pattern, which fluctuates in time due to side chain and conformational motions. At metal/and oxide/water interfaces, the pattern is formed by surface topmost atoms, and fluctuations are due to, e.g., local surface polarization and rearrangements in the adsorbed water layer. All these dynamics have the potential to influence key processes such as wetting, energy relaxation, and biological function. Yet, their impact on the water H-bond network remains often elusive. Here, we leverage molecular dynamics to address this fundamental question at a self-assembled monolayer (SAM)/water interface, where ns dynamics is induced by frustrating SAM-water interactions via methylation of the terminal -OH groups of poly(ethylene glycol) (PEG) chains. We find that surface dynamics couples to the water H-bond network, inducing a response on the same ns time scale. This leads to time fluctuations of local wetting, oscillating from hydrophobic to hydrophilic environments. Our results suggest that rather than average properties, it is the local─ both in time and space─ solvation that determines the chemical-physical properties of dynamically patterned surfaces in water.

Real-time monitoring of voltage-responsive biomolecular binding onto electro-switchable surfaces

Voltage-responsive biosensors capable of monitoring real-time adsorption behavior of biological analytes onto electroactive surfaces offer attractive strategies for disease detection, separations, and other adsorption-dependent analytical techniques. Adsorption of biological analytes onto electrically switchable surfaces can be modelled using neutravidin and biotin. Here, we report self-assembled monolayers formed from voltage-switchable biotinylated molecules on gold surfaces with tunable sensitivity to neutravidin in response to applied voltages. By using electrochemical quartz crystal microbalance (EQCM), we demonstrated real-time switchable behavior of these bio-surfaces and investigate the range of sensitivity by varying the potential of the same surfaces from -400 mV to open circuit potential (+155 mV) to +300 mV. We compared the tunability of the mixed surfaces to bare Au surfaces, voltage inert surfaces, and switchable biotinylated surfaces. Our results indicate that quartz crystal microbalance allows real-time changes in analyte binding behavior, which enabled observing the evolution of neutravidin sensitivity as the applied voltage was shifted. EQCM could in principle be used in kinetic studies or to optimize voltage-switchable surfaces in adsorption-based diagnostics.

Stimuli-Responsive Oligourea Molecular Films

We have designed and synthesized a helical cysteamine-terminated oligourea foldamer composed of ten urea residues featuring side carboxyl and amine groups. The carboxyl group is located in proximity to the C-terminus of the oligourea and hence at the negative pole of the helix dipole. The amine group is located close to the N-terminus and hence at the positive pole of the helix dipole. Beyond the already remarkable dipole moment inherent in oligourea 2.5 helices, the incorporation of additional charges originating from the carboxylic and amine groups is supposed to impact the overall charge distribution along the molecule. These molecules were self-assembled into monolayers on a gold substrate, allowing us to investigate the influence of an electric field on these polar helices. By applying surface-enhanced infrared reflection-absorption spectroscopy, we proved that molecules within the monolayers tend to reorient themselves more vertically when a negative bias is applied to the surface. It was also found that surface-confined oligourea molecules affected by the external electric field tend to rearrange the electron density at urea groups, leading to the stabilization of the resonance structure with charge transfer character. The presence of the external electric field also affected the nanomechanical properties of the oligourea films, suggesting that molecules also tend to reorient in the ambient environment without an electrolyte solution. Under the same conditions, the helical oligourea displayed a robust piezoresponse, particularly noteworthy given the slender thickness of the monolayer, which measured approximately 1.2 nm. This observation demonstrates that thin molecular films composed of oligoureas may exhibit stimulus-responsive properties. This, in turn, may be used in nanotechnology systems as actuators or functional films, enabling precise control of their thickness in the range of even fractions of nanometers.

Rational Design of Stimuli-Responsive Inorganic 2D Materials via Molecular Engineering: Toward Molecule-Programmable Nanoelectronics

The ability of electronic devices to act as switches makes digital information processing possible. Succeeding graphene, emerging inorganic 2D materials (i2DMs) have been identified as alternative 2D materials to harbor a variety of active molecular components to move the current silicon-based semiconductor technology forward to a post-Moore era focused on molecule-based information processing components. In this regard, i2DMs benefits are not only for their prominent physiochemical properties (e.g., the existence of bandgap), but also for their high surface-to-volume ratio rich in reactive sites. Nonetheless, since this field is still in an early stage, having knowledge of both i) the different strategies for molecularly functionalizing the current library of i2DMs, and ii) the different types of active molecular components is a sine qua non condition for a rational design of stimuli-responsive i2DMs capable of performing logical operations at the molecular level. Consequently, this Review provides a comprehensive tutorial for covalently anchoring ad hoc molecular components-as active units triggered by different external inputs-onto pivotal i2DMs to assess their role in the expanding field of molecule-programmable nanoelectronics for electrically monitoring bistable molecular switches. Limitations, challenges, and future perspectives of this emerging field which crosses materials chemistry with computation are critically discussed.

Smart dental materials for antimicrobial applications

Smart biomaterials can sense and react to physiological or external environmental stimuli (e.g., mechanical, chemical, electrical, or magnetic signals). The last decades have seen exponential growth in the use and development of smart dental biomaterials for antimicrobial applications in dentistry. These biomaterial systems offer improved efficacy and controllable bio-functionalities to prevent infections and extend the longevity of dental devices. This review article presents the current state-of-the-art of design, evaluation, advantages, and limitations of bioactive and stimuli-responsive and autonomous dental materials for antimicrobial applications. First, the importance and classification of smart biomaterials are discussed. Second, the categories of bioresponsive antibacterial dental materials are systematically itemized based on different stimuli, including pH, enzymes, light, magnetic field, and vibrations. For each category, their antimicrobial mechanism, applications, and examples are discussed. Finally, we examined the limitations and obstacles required to develop clinically relevant applications of these appealing technologies.

Nonadjacent Wireless Electrotherapy for Tissue Repair by a 3D-Printed Bioresorbable Fully Soft Triboelectric Nanogenerator

Electrotherapy is a promising tissue repair technique. However, electrotherapy devices are frequently complex and must be placed adjacent to injured tissue, thereby limiting their clinical application. Here, we propose a general strategy to facilitate tissue repair by modulating endogenous electric fields with nonadjacent (approximately 44 mm) wireless electrotherapy through a 3D-printed entirely soft and bioresorbable triboelectric nanogenerator based stimulator, without any electrical accessories, which has biomimetic mechanical properties similar to those of soft tissue. In addition, the feasibility of using the stimulator to construct an electrical double layer with tissue for nonadjacent wireless electrotherapy was demonstrated by skin and muscle injury models. The treated groups showed significantly improved tissue repair compared with the control group. In conclusion, we developed a promising electrotherapy strategy and may inspire next-generation electrotherapy for tissue repair.

Recent advances in responsive antibacterial materials: design and application scenarios

Bacterial infection is one of the leading causes of death globally, although modern medicine has made considerable strides in the past century. As traditional antibiotics are suffering from the emergence of drug resistance, new antibacterial strategies are of great interest. Responsive materials are appealing alternatives that have shown great potential in combating resistant bacteria and avoiding the side effects of traditional antibiotics. In this review, the responsive antibacterial materials are introduced in terms of stimulus signals including intrinsic (pH, enzyme, ROS, etc.) and extrinsic (light, temperature, magnetic fields, etc.) stimuli. Their biomedical applications in therapeutics and medical devices are then discussed. Finally, the author's perspective of the challenge and the future of such a system is provided.

Tissue Engineering in Neuroscience: Applications and Perspectives

Neurological disorders have always been a threat to human physical and mental health nowadays, which are closely related to the nonregeneration of neurons in the nervous system (NS). The damage to the NS is currently difficult to repair using conventional therapies, such as surgery and medication. Therefore, repairing the damaged NS has always been a vast challenge in the area of neurology. Tissue engineering (TE), which integrates the cell biology and materials science to reconstruct or repair organs and tissues, has widespread applications in bone, periodontal tissue defects, skin repairs, and corneal transplantation. Recently, tremendous advances have been made in TE regarding neuroscience. In this review, we summarize TE's recent progress in neuroscience, including pathological mechanisms of various neurological disorders, the concepts and classification of TE, and the most recent development of TE in neuroscience. Lastly, we prospect the future directions and unresolved problems of TE in neuroscience.

Treating Polarization Effects in Charged and Polar Bio-Molecules Through Variable Electrostatic Parameters

Polarization plays important roles in charged and hydrogen bonding containing systems. Much effort ranging from the construction of physics-based models to quantum mechanism (QM)-based and machine learning (ML)-assisted models have been devoted to incorporating the polarization effect into the conventional force fields at different levels, such as atomic and coarse grained (CG). The application of polarizable force fields or polarization models was limited by two aspects, namely, computational cost and transferability. Different from physics-based models, no predetermining parameters were required in the QM-based approaches. Taking advantage of both the accuracy of QM calculations and efficiency of molecular mechanism (MM) and ML, polarization effects could be treated more efficiently while maintaining the QM accuracy. The computational cost could be reduced with variable electrostatic parameters, such as the charge, dipole, and electronic dielectric constant with the help of linear scaling fragmentation-based QM calculations and ML models. Polarization and entropy effects on the prediction of partition coefficient of druglike molecules are demonstrated by using both explicit or implicit all-atom molecular dynamics simulations and machine learning-assisted models. Directions and challenges for future development are also envisioned.

Research progress of stimulus-responsive antibacterial materials for bone infection

Infection is one of the most serious complications harmful to human health, which brings a huge burden to human health. Bone infection is one of the most common and serious complications of fracture and orthopaedic surgery. Antibacterial treatment is the premise of bone defect healing. Among all the antibacterial strategies, irritant antibacterial materials have unique advantages and the ability of targeted therapy. In this review, we focus on the research progress of irritating materials, the development of antibacterial materials and their advantages and disadvantages potential applications in bone infection.

Adhesive Interfaces toward a Zero-Waste Industry

This Feature Article evaluates ongoing efforts to adapt adhesives toward the goal of zero-waste living and suggests the most promising future directions. Adhesives are not always considered in zero-waste manufacturing because they represent only a small fraction of a product and offer no additional functionality. However, their presence restricts the reintegration of constituent parts into a circular economy, so a new generation of adhesives is required. Furthermore, their production often leads to harmful pollutants. Here, two main approaches toward addressing these problems are considered: first, the use of natural materials that replace petroleum-based polymers from which conventional adhesives are made and second, the production of dismantlable adhesives capable of debonding on demand with the application of an external stimulus. These approaches, either individually or combined, offer a new paradigm in zero-waste industrial production and consumer applications.

Adsorption of rhodamine 6G and choline on gold electrodes: a molecular dynamics study

The adsorption of analyte molecules on nano-optoelectrodes (e.g. a combined nanoantenna and nanoelectrode device) significantly affects the signal characteristics in surface-enhanced Raman scattering (SERS) measurements. Understanding how different molecules adsorb on electrodes and their electrical potential modulation helps interpret SERS measurements better. We use molecular dynamics simulations to investigate the adsorption of prototypical analyte molecules (rhodamine 6G and choline) on gold electrodes with negative, neutral, and positive surface charges. We show that both molecules can readily adsorb on gold surfaces at all surface charge densities studied. Nevertheless, the configurations of the adsorbed molecules can differ for different surface charge densities, and adsorption can also change a molecule's conformation. Rhodamine 6G molecules adsorb more strongly than choline molecules, and the adsorption of both molecules is affected by electrode charge in 0.25 M NaCl solutions. The mechanisms of these observations are elucidated, and their implications for voltage-modulated SERS measurements are discussed.

Stimuli-Responsive Antibacterial Materials: Molecular Structures, Design Principles, and Biomedical Applications

Infections are regarded as the most severe complication associated with human health, which are urgent to be solved. Stimuli-responsive materials are appealing therapeutic platforms for antibacterial treatments, which provide great potential for accurate theranostics. In this review, the advantages, the response mechanisms, and the key design principles of stimuli-responsive antibacterial materials are highlighted. The biomedical applications, the current challenges, and future directions of stimuli-responsive antibacterial materials are also discussed. First, the categories of stimuli-responsive antibacterial materials are comprehensively itemized based on different sources of stimuli, including external physical environmental stimuli (e.g., temperature, light, electricity, salt, etc.) and bacterial metabolites stimuli (e.g., acid, enzyme, redox, etc.). Second, structural characteristics, design principles, and biomedical applications of the responsive materials are discussed, and the underlying interrelationships are revealed. The molecular structures and design principles are closely related to the sources of stimuli. Finally, the challenging issues of stimuli-responsive materials are proposed. This review will provide scientific guidance to promote the clinical applications of stimuli-responsive antibacterial materials.

Ionic interaction-driven switchable bactericidal surfaces

Bacteria in the external environment inevitably invade the wound and subsequently colonize the wound surface during surgery and biomedical operations, which slows down the process of wound healing and tissue repair; this poses a significant threat to human health. Therefore, the development of an intelligent antibacterial surface has become the focus of research in the field of antimicrobial strategies, which has important social and economic significance. Here, we present a simple approach of producing an ionic interaction-driven anionic activation substratum which is then functionalized with cationic molecules through coulombic interactional immobilization. The switchable multifunctional antibacterial surface can decrease bacterial attachment and inactivate the attached microorganisms, thus overcoming the conventional challenge for antibacterial surfaces. Briefly, poly (3-sulfopropyl methacrylate potassium salt) (PSPMA) brushes were constructed by surface-initiated atom transfer radical polymerization on silicon or cotton fabric substrates, and a positive-charged component, namely lysozyme (LYZ), hexadecyl trimethyl ammonium bromide (CTAB) or chitosan (CS), was loaded on negative-charged sulfonate groups through electrostatic interactions. The resultant brush-grafted surfaces exhibited more than ∼95.5% bactericidal efficacy and ∼92.8% release rate after the introduction of an adequate amount of contra-ions (1.0 M; Na⁺ & Cl^-) against both Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, thus achieving a regenerated surface through the cyclic process of "assembly-dissociation". Smart cotton fabric (Fabric-PSPMA/LYZ and Fabric-PSPMA/CS) surfaces were constructed, which were found to promote wound epidermal tissue regeneration with a higher efficiency after 7-day in vivo studies. This ionic interaction-driven method used in the present work is simple and can reversibly renew antibacterial surfaces, which will help in the wider utilization of switchable antibacterial materials with a more ecologic and economic significance. STATEMENT OF SIGNIFICANCE: Smart antibacterial surfaces with renewable characteristics have attracted considerable interests over the past few years. Here, we used ionic interaction-driven force to manipulate dynamic conformational changes in PSPMA surface brushes, accompanied by highly switchable bacteria killing and bacteria releasing behaviors. Different cationic molecules were also designed for assembly/dissociation on the PSPMA-modified surfaces, and the essential parameters, including chemical structures, molecular weight, and cationic charge density, were investigated. With the refined structural combinations and the balance of bacteria killing/bacteria releasing behaviors, smart cotton fabrics (e.g., Fabric-PSPMA/lysozyme and Fabric-PSPMA/chitosan) were designed that could promote wound healing and tissue repair. These results contribute to the fundamental understanding of a switchable cationic-anionic pair design and the corresponding practical, renewable, highly antibacterial fabric.

Switchable Adhesion: On-Demand Bonding and Debonding

Adhesives have a long and illustrious history throughout human history. The development of synthetic polymers has highly improved adhesions in terms of their strength and environmental tolerance. As soft robotics, flexible electronics, and intelligent gadgets become more prevalent, adhesives with changeable adhesion capabilities will become more necessary. These adhesives should be programmable and switchable, with the ability to respond to light, electromagnetic fields, thermal, and other stimuli. These requirements necessitate novel concepts in adhesion engineering and material science. Considerable studies have been carried out to develop a wide range of adhesives. This review focuses on stimuli-responsive material-based adhesives, outlining current research on switchable and controlled adhesives, including design and manufacturing techniques. Finally, the potential for smart adhesives in applications, and the development of future adhesive forms are critically suggested.

Nanoarchitectonics of Electrically Activable Phosphonium Self-Assembled Monolayers to Efficiently Kill and Tackle Bacterial Infections on Demand

Prosthetic implants are widely used in dentistry and orthopedics and, as a result, infections can occur which cause their removal. Therefore, it is essential to propose methods of eradicating the bacteria that remain on the prosthesis during treatment. For this purpose, it is necessary to develop surfaces whose antibacterial activity can be controlled. Herein, we designed innovative and smart phosphonium self-assembled monolayer (SAM) interfaces that can be electrically activated on demand for controlling bacterial contaminations on solid surfaces. Upon electroactivation with a low potential (0.2 V for 60 min., conditions determined through a DOE), a successful stamping out of Gram-positive and Gram-negative bacterial strains was obtained with SAM-modified titanium surfaces, effectively killing 95% of Staphylococcus aureus and 90% Klebsiellapneumoniae. More importantly, no toxicity towards eukaryotic cells was observed which further enhances the biocompatible character of these novel surfaces for further implementation.

Computational and data driven molecular material design assisted by low scaling quantum mechanics calculations and machine learning

Electronic structure methods based on quantum mechanics (QM) are widely employed in the computational predictions of the molecular properties and optoelectronic properties of molecular materials. The computational costs of these QM methods, ranging from density functional theory (DFT) or time-dependent DFT (TDDFT) to wave-function theory (WFT), usually increase sharply with the system size, causing the curse of dimensionality and hindering the QM calculations for large sized systems such as long polymer oligomers and complex molecular aggregates. In such cases, in recent years low scaling QM methods and machine learning (ML) techniques have been adopted to reduce the computational costs and thus assist computational and data driven molecular material design. In this review, we illustrated low scaling ground-state and excited-state QM approaches and their applications to long oligomers, self-assembled supramolecular complexes, stimuli-responsive materials, mechanically interlocked molecules, and excited state processes in molecular aggregates. Variable electrostatic parameters were also introduced in the modified force fields with the polarization model. On the basis of QM computational or experimental datasets, several ML algorithms, including explainable models, deep learning, and on-line learning methods, have been employed to predict the molecular energies, forces, electronic structure properties, and optical or electrical properties of materials. It can be conceived that low scaling algorithms with periodic boundary conditions are expected to be further applicable to functional materials, perhaps in combination with machine learning to fast predict the lattice energy, crystal structures, and spectroscopic properties of periodic functional materials.

Electroactive Biomaterials and Systems for Cell Fate Determination and Tissue Regeneration: Design and Applications

During natural tissue regeneration, tissue microenvironment and stem cell niche including cell-cell interaction, soluble factors, and extracellular matrix (ECM) provide a train of biochemical and biophysical cues for modulation of cell behaviors and tissue functions. Design of functional biomaterials to mimic the tissue/cell microenvironment have great potentials for tissue regeneration applications. Recently, electroactive biomaterials have drawn increasing attentions not only as scaffolds for cell adhesion and structural support, but also as modulators to regulate cell/tissue behaviors and function, especially for electrically excitable cells and tissues. More importantly, electrostimulation can further modulate a myriad of biological processes, from cell cycle, migration, proliferation and differentiation to neural conduction, muscle contraction, embryogenesis, and tissue regeneration. In this review, endogenous bioelectricity and piezoelectricity are introduced. Then, design rationale of electroactive biomaterials is discussed for imitating dynamic cell microenvironment, as well as their mediated electrostimulation and the applying pathways. Recent advances in electroactive biomaterials are systematically overviewed for modulation of stem cell fate and tissue regeneration, mainly including nerve regeneration, bone tissue engineering, and cardiac tissue engineering. Finally, the significance for simulating the native tissue microenvironment is emphasized and the open challenges and future perspectives of electroactive biomaterials are concluded.

Elucidating the Influence of Electrical Potentials on the Formation of Charged Oligopeptide Self-Assembled Monolayers on Gold

Self-assembled monolayers (SAMs) based on oligopeptides have garnered immense interest for a wide variety of innovative biomedical and electronic applications. However, to exploit their full potential, it is necessary to understand and control the surface chemistry of oligopeptides. Herein, we report on how different electrical potentials affect the adsorption kinetics, stability and surface coverage of charged oligopeptide SAMs on gold surfaces. Kinetic analysis using electrochemical surface plasmon resonance (e-SPR) reveals a slower oligopeptide adsorption rate at more positive or negative electrical potentials. Additional analysis of the potential-assisted formed SAMs by X-ray photoelectron spectroscopy demonstrates that an applied electrical potential has minimal effect on the packing density. These findings not only reveal that charged oligopeptides exhibit a distinct potential-assisted assembly behaviour but that an electrical potential offers another degree of freedom in controlling their adsorption rate.

Effect of Concentration, Chain Length, Hydrophobicity, and an External Electric Field on the Growth of Mixed Alkanethiol Self-Assembled Monolayers: A Molecular Dynamics Study

Growing functionalized self-assembled monolayers (SAMs) with fewer defects and lower cost is the focus of ongoing investigations. In the present study, molecular dynamics simulations were performed to investigate the process of SAM formation on a gold substrate from mixed alkanethiolates in ethanol solution. Using the mixed-SAM system of 11-mercaptoundecanoic acid (MUA) with either 1-decanethiol (C9CH3) or 6-mercaptohexanol (C6OH) in a 3:7 ratio as the standard SAM model, we systematically investigated the effects of the concentration, chain length, functional group, and an external electric field on SAM growth. The results showed that the initial growth rate and surface coverage of the SAM are dependent on the ligand concentration. At a certain high concentration (about 1.2-1.5 times the minimum concentration), the final surface coverage is optimal. Reducing the chain length and increasing the proportion of hydrophobic diluting molecules are effective ways to improve the surface coverage, but the compositional ligands have to be changed, which may not be desirable for the functional requirements of SAMs. Furthermore, by investigating the behavior of the alkanethiolates and ethanol solvent under an applied external field, we find that a strong electric field with a proper field direction can facilitate the generation of defect-free monolayers. These findings will contribute to the understanding of mixed-SAM formation and provide insight into experimental design for efficient and effective SAM formation.

Reorientation of Polymers in an Applied Electric Field for Electrochemical Sensors

This mini review investigates the relationship and interactions of polymers under an applied electric field (AEF) for sensor applications. Understanding how and why polymers are reoriented and manipulated by under an AEF is essential for future growth in polymer-based electrochemical sensors. Examples of polymers that can be manipulated in an AEF for sensor applications are provided. Current methods of monitoring polymer reorientation will be described, but new techniques are needed characterize polymer response to various AEF stimuli. The unique and reproducible stimuli response of polymers elicited by an AEF has significant potential for growth in the sensing community.

Direct Extracellular Electron Transfer of the Geobacter sulfurreducens Pili Relevant to Interaromatic Distances

Microorganisms can transfer electrons directly to extracellular acceptors, during which organic compounds are oxidized to carbon dioxide. One of these microbes, Geobacter sulfurreducens, is well known for the "metallic-like" conductivity of its type IV pili. However, there is no consensus on what the mechanism for electron transfer along these conductive pili is. Based on the aromatic distances and orientations of our predicted models, the mechanism of electron transfer in the Geobacter sulfurreducens (GS) pili was explored by quantum chemical calculations with Marcus theory of electron transfer reactions. Three aromatic residues from the N-terminal α-helix of the GS pilin subunit are packed together, resulting in a continuous pi-pi interaction chain. The theoretical conductance (4.69 μS/3.85 μS) of the predicted models is very similar to that in the experiments reported recently (3.40 μS). These findings offer a new concept that the GS pili belongs to a new class of proteins that can transport electrons through pi-pi interaction between aromatic residues and also provide a valuable tool for guiding further researches of these conductive pili, to investigate their roles in biogeochemical cycling, and potential applications in biomaterials, bioelectronics, and bioenergy.

Hierarchical self-assembly of 3D lattices from polydisperse anisometric colloids

Colloids are mainly divided into two types defined by size. Micron-scale colloids are widely used as model systems to study phase transitions, while nanoparticles have physicochemical properties unique to their size. Here we study a promising yet underexplored third type: anisometric colloids, which integrate micrometer and nanometer dimensions into the same particle. We show that our prototypical system of anisometric silver plates with a high polydispersity assemble, unexpectedly, into an ordered, three-dimensional lattice. Real-time imaging and interaction modeling elucidate the crucial role of anisometry, which directs hierarchical assembly into secondary building blocks-columns-which are sufficiently monodisperse for further ordering. Ionic strength and plate tip morphology control the shape of the columns, and therefore the final lattice structures (hexagonal versus honeycomb). Our joint experiment-modeling study demonstrates potentials of encoding unconventional assembly in anisometric colloids, which can likely introduce properties and phase behaviors inaccessible to micron- or nanometer-scale colloids.

On-Demand Electrical Switching of Antibody-Antigen Binding on Surfaces

The development of stimuli-responsive interfaces between synthetic materials and biological systems is providing the unprecedented ability to modulate biomolecular interactions for a diverse range of biotechnological and biomedical applications. Antibody-antigen binding interactions are at the heart of many biosensing platforms, but no attempts have been made yet to control antibody-antigen binding in an on-demand fashion. Herein, a molecular surface was designed and developed that utilizes an electric potential to drive a conformational change in surface bound peptide moiety, to give on-demand control over antigen-antibody interactions on sensor chips. The molecularly engineered surfaces allow for propagation of conformational changes from the molecular switching unit to a distal progesterone antigen, resulting in promotion (ON state) or inhibition (OFF state) of progesterone antibody binding. The approach presented here can be generally applicable to other antigen-antibody systems and meets the technological needs for in situ long-term assessment of biological processes and disease monitoring on-demand.

Switchable presentation of cytokines on electroactive polypyrrole surfaces for hematopoietic stem and progenitor cells

Hematopoietic stem cells are used in transplantations for patients with hematologic malignancies. Scarce sources require efficient strategies of expansion, including polymeric biomaterials mimicking architectures of bone marrow tissue. Tissue microenvironment and mode of cytokine presentation strongly influence cell fate. Although several cytokines with different functions as soluble or membrane-bound mediators have already been identified, their precise roles have not yet been clarified. A need exists for in vitro systems that mimic the in vivo situation to enable such studies. One way is to establish surfaces mimicking physiological presentation using protein-immobilization onto polymer films. However these films merely provide a static presentation of the immobilized proteins. It would be advantageous to also dynamically change protein presentation and functionality to better reflect the in vivo conditions. The electroactive polymer polypyrrole shows excellent biocompatibility and electrochemically alters its surface properties, becoming an interesting choice for such setups. Here, we present an in vitro system for switchable presentation of membrane-bound cytokines. We use interleukin IL-3, known to affect hematopoiesis, and show that when immobilized on polypyrrole films, IL-3 is bioavailable for the bone marrow-derived FDC-P1 progenitor cell line. Moreover, IL-3 presentation can be successfully altered by changing the redox state of the film, in turn influencing FDC-P1 cell viability. This novel in vitro system provides a valuable tool for stimuli-responsive switchable protein presentation allowing the dissection of relevant mediators in stem and progenitor cell behavior.

Sweet Switch: Sugar-Responsive Bioactive Surfaces Based on Dynamic Covalent Bonding

Smart bioactive surfaces that can modulate interactions with biological systems are of great interest. In this work, a surface with switchable bioactivity in response to sugars has been developed. It is based on dynamic covalent bonding between phenylboronic acid (PBA) and secondary hydroxyls on the "wide" rim of β-cyclodextrin (β-CD). The system reported consists of gold surface modified with PBA-containing polymer brushes and a series of functional β-CD derivatives conjugated to diverse bioactive ligands (CD-X). CD-X molecules are attached to the surface to give specified bioactivity such as capture of a specific protein or killing of attached bacteria. Subsequent treatment with cis-diol containing biomolecules having high affinity for PBA (e.g. fructose) leads to the release of CD-X together with the captured proteins, killed bacteria, and so forth from the surface. The surface bioactivity is thereby "turned off". Effectively, this constitutes an on-off bioactivity switch in a mild and noninvasive way, which has the potential in the design of dynamic bioactive surfaces for biomedical applications.

On-Demand Modulation of Bacterial Cell Fates on Multifunctional Dynamic Substrates

This paper reports unprecedented dynamic surfaces based on zwitterionic low-density self-assembled monolayers (LDSAMs) of alkanethiolates on gold, which integrate three interconvertible states-bacteria-adherable, bactericidal, and nonfouling states-through electrical modulations. The conformations of alkanethiolates were electrically modulated to generate zwitterionic, anionic, and cationic surfaces, which responded differently to bacteria and determined the fate of bacteria. Furthermore, the reversible switching of multifunctions of the surface was realized for killing bacteria and subsequently releasing dead bacteria from the surface. For practical application of our strategy, we examined the selective antibacterial effect of our surface for eradication of mycoplasma contaminants in contaminated mammalian cell cultures.

Recent developments in smart antibacterial surfaces to inhibit biofilm formation and bacterial infections

Since their development over 70 years, antibiotics are still the most effective strategy to treat bacterial biofilms and infections.

Quantitative Measurements of Size-Dependent Magnetoelectric Coupling in Fe3O4 Nanoparticles

Bulk magnetite (Fe₃O₄), the loadstone used in magnetic compasses, has been known to exhibit magnetoelectric (ME) properties below ∼10 K; however, corresponding ME effects in Fe₃O₄ nanoparticles have been enigmatic. We investigate quantitatively the ME coupling of spherical Fe₃O₄ nanoparticles with uniform diameters (d) from 3 to 15 nm embedded in an insulating host, using a sensitive ME susceptometer. The intrinsic ME susceptibility (MES) of the Fe₃O₄ nanoparticles is measured, exhibiting a maximum value of ∼0.6 ps/m at 5 K for d = 15 nm. We found that the MES is reduced with reduced d but remains finite until d = ∼5 nm, which is close to the critical thickness for observing the Verwey transition. Moreover, with reduced diameter the critical temperature below which the MES becomes conspicuous increased systematically from 9.8 K in the bulk to 19.7 K in the nanoparticles with d = 7 nm, reflecting the core-shell effect on the ME properties. These results point to a new pathway for investigating ME effect in various nanomaterials.