Dual Gold Nanoparticle/Chemiluminescent Immunoassay for Sensitive Detection of Multiple Analytes

Rapid detection of Salmonella in milk by labeling-free electrochemical immunosensor based on an Fe3O4-ionic liquid-modified electrode

Electrochemical sensors show distinct advantages over other types of sensors in the rapid detection of microorganisms. Here, we attempted to construct a label-free electrochemical immunosensor based on an Fe3O4-ionic liquid (IL)-modified electrode to rapidly detect Salmonella in milk. The excellent ionic conductivity of the IL facilitated sensor construction, and the large surface area of nano-Fe3O4 provided numerous sites for subsequent experiments. An antibody was fixed on the Fe3O4-IL complex with polyglutamic acid modification by a simple infusion method. The microstructure of the Fe3O4-IL composites was investigated by scanning electron microscopy, and the elements and structures of the composites were analyzed by energy dispersive X-ray and Fourier transform infrared spectroscopy. Under optimized experimental conditions, the detection range of the constructed sensor was 3.65 × 102-3.65 × 108 CFU mL-1, and the LOD was 1.12 × 102 CFU mL-1 (S/N = 3). In addition, the prepared electrochemical immunosensor is convenient for detecting foodborne pathogens because of its outstanding stability, good selectivity, and repeatability.

Simple, Visual, Point-of-Care SARS-CoV-2 Detection Incorporating Recombinase Polymerase Amplification and Target DNA-Protein Crosslinking Enhanced Chemiluminescence

The ongoing COVID-19 pandemic, driven by persistent SARS-CoV-2 transmission, threatens human health worldwide, underscoring the urgent need for an efficient, low-cost, rapid SARS-CoV-2 detection method. Herein, we developed a point-of-care SARS-CoV-2 detection method incorporating recombinase polymerase amplification (RPA) and DNA-protein crosslinking chemiluminescence (DPCL) (RPADPCL). RPADPCL involves the crosslinking of biotinylated double-stranded RPA DNA products with horseradish peroxidase (HRP)-labeled streptavidin (SA-HRP). Modified products are captured using SA-labeled magnetic beads, and then analyzed using a chemiluminescence detector and smartphone after the addition of a chemiluminescent substrate. Under optimal conditions, the RPADPCL limit of detection (LOD) was observed to be 6 copies (within the linear detection range of 1-300 copies) for a plasmid containing the SARS-CoV-2 N gene and 15 copies (within the linear range of 10-500 copies) for in vitro transcribed (IVT) SARS-CoV-2 RNA. The proposed method is convenient, specific, visually intuitive, easy to use, and does not require external excitation. The effective RPADPCL detection of SARS-CoV-2 in complex matrix systems was verified by testing simulated clinical samples containing 10% human saliva or a virus transfer medium (VTM) spiked with a plasmid containing a SARS-CoV-2 N gene sequence or SARS-CoV-2 IVT RNA. Consequently, this method has great potential for detecting targets in clinical samples.

Potential-resolved electrochemiluminescence biosensor for simultaneous determination of multiplex miRNA

The multi-target simultaneous detection strategy based on potential-resolved electrochemiluminescence (ECL) has still been a research hotspot in analytical science, but the limited selection of ECL luminophores hinders the development of this field. Herein, polyethyleneimine functionalized perylene derivatives (PTC-PEI) and luminol functionalized gold nanoparticles (Lu-Au NPs) possessed significantly resolved emission potentials as ECL luminophore. The ternary ECL system was constructed with MoS2 nanoflowers and K2S2O8 as the coreaction accelerator and coreactant respectively, which significantly improved the cathode ECL emission of PTC-PEI. Simultaneously, the anode coreaction accelerator ZnO nanoflowers could promote the anode coreactant dissolved O2 reduction, and extremely enhanced the anode ECL emission of Lu-Au NPs. The proposed strategy addressed the major technical challenge of cross interference and competition of the coreactants for dual-biomarker detection, thus enabling accurate detection of miRNA-205 and miRNA-21 from 10 fM to 100 nM, with detection limits of 2.57 and 1.15 fM, respectively. In general, this work achieved a single-step synchronous detection of dual biomarkers, providing a new idea for the ECL detection of multiple biomarkers, and having potential value in the clinical diagnosis.

Immunomultiple PCR-based electrochemical and lateral flow strategy for the simultaneous detection of liver cancer tumor markers

The current use of the single serum biomarker α-fetoprotein (AFP) in clinical practice has limitations in terms of specificity and sensitivity. We propose a strategy that combines antigen capture polymerase chain reaction (AC-PCR), lateral flow assay (LFA), and electrochemical biosensors to detect both AFP and circulating tumor cells (CTCs) in liver cancer serum. First, we used the AC-PCR technique to achieve target separation, purification, signal conversion, and amplification, eliminating target heterogeneity. Then, we achieved rapid results through the LFA and electrochemical biosensor platforms. As a result, the proposed assay has limits of 5 cells/mL for CTCs and 5 µg/L for AFP. The proposed method was applied effectively to simulated blood samples. This method has the potential to play a role in early liver cancer and provide a potential application for the diagnosis and precision treatment of liver cancer.

Dual Functional Ultrasensitive Point-of-Care Clinical Diagnosis Using Metal-Organic Frameworks-Based Immunobeads

Sepsis is an acute systemic infectious syndrome with high fatality. Fast and accurate diagnosis, monitoring, and medication of sepsis are essential. We exploited the fluorescent metal-AIEgen frameworks (MAFs) and demonstrated the dual functions of protein detection and bacteria identification: (i) ultrasensitive point-of-care (POC) detection of sepsis biomarkers (100 times enhanced sensitivity); (ii) rapid POC identification of Gram-negative/positive bacteria (selective aggregation within 20 min). Fluorescent lateral flow immunoassays (LFAs) are convenient and inexpensive for POC tests. MAFs possess a large surface area, excellent photostability, high quantum yield (∼80%), and multiple active sites serving as protein binding domains for ultrasensitive detection of sepsis biomarkers (IL-6/PCT) on LFAs. The limit of detection (LOD) for IL-6/PCT is 0.252/0.333 pg/mL. Rapid appraisal of infectious bacteria is vital to guide the use of medicines. The dual-functional fluorescent MAFs have great potential in POC tests for the clinical diagnosis of bacterial infections.

Much Stronger Chemiluminescence of 9-Mesityl-10-methylacridinium Ion than Lucigenin at Neutral Conditions for Co2+ Detection

9-Mesityl-10-methylacridinium ion (Acr+-Mes) is a donor-acceptor molecule with a much longer lifetime and a higher energy electron transfer excited state than natural photosynthetic reaction centers. Unlike lucigenin with a coplanar geometry, Acr+-Mes has an orthogonal geometry. There is no π conjugation between Acr+ and Mes. Due to its special electron donor-acceptor structure, it does not rely on strong alkalinity to generate an electron transfer state like lucigenin, which makes it possible to achieve chemiluminescence (CL) under weakly alkaline or neutral conditions. In this study, we report Acr+-Mes CL for the first time. Acr+-Mes generates about 400 times stronger CL intensity than lucigenin under neutral conditions (pH = 7) using KHSO5 as the coreactant. Moreover, Co2+ can enhance Acr+-Mes/KHSO5 CL remarkably. Acr+-Mes/KHSO5 CL enables Co2+ detection with a linear range of 0.5-500 nM and a limit of detection of 28 pM (S/N = 3). This method was tested for the detection of Co2+ in lake water, and the standard recovery rate of 96.8-107% was achieved. This study provides a new way to develop efficient CL systems in neutral solutions.

Recent Advances of Biosensors for Detection of Multiple Antibiotics

The abuse of antibiotics has caused a serious threat to human life and health. It is urgent to develop sensors that can detect multiple antibiotics quickly and efficiently. Biosensors are widely used in the field of antibiotic detection because of their high specificity. Advanced artificial intelligence/machine learning algorithms have allowed for remarkable achievements in image analysis and face recognition, but have not yet been widely used in the field of biosensors. Herein, this paper reviews the biosensors that have been widely used in the simultaneous detection of multiple antibiotics based on different detection mechanisms and biorecognition elements in recent years, and compares and analyzes their characteristics and specific applications. In particular, this review summarizes some AI/ML algorithms with excellent performance in the field of antibiotic detection, and which provide a platform for the intelligence of sensors and terminal apps portability. Furthermore, this review gives a short review of biosensors for the detection of multiple antibiotics.

A multiple lateral flow immunoassay based on AuNP for the detection of 5 chemical contaminants in milk

Melamine (MEL), enrofloxacin (ENR), sulfamethazine (SMZ), tetracycline (TC), and aflatoxin M₁ (AFM₁) are the main chemical contaminants in milk. It is necessary to detect these miscellaneous chemical contaminants in milk synchronously to ensure the safety of the milk. In this study, a multiple lateral flow immunoassay (LFIA) was developed for the detection of MEL, ENR, SMZ, TC, and AFM₁ in milk. Under optimal experimental conditions, the cutoff values were 25 ng/mL for MEL, 1 ng/mL for ENR, 2.5 ng/mL for SMZ, 2.5 ng/mL for TC, and 0.25 ng/mL for AFM₁ in milk samples. The limits of detection of LFIA were 0.173 ng/mL for MEL, 0.078 ng/mL for ENR, 0.059 ng/mL for SMZ, 0.082 ng/mL for TC, and 0.0064 ng/mL for AFM₁. The recovery rates of LFIA in milk were 83.2-104.4% for MEL, 76.5-127.3% for ENR, 96.8-113.5% for SMZ, 107.1-166.6% for TC, and 93.5-130.3% for AFM₁. The coefficients of variation were all less than 15%. As a whole, the developed multiple lateral flow immunoassay showed potential as a highly reliable and excellent tool for the rapid and sensitive screening of MEL, ENR, SMZ, TC, and AFM₁ in milk.

Cartridge voltage-sensitive micropump immunosensor based on a self-assembled polydopamine coating mediated signal amplification strategy

Current biosensing detection assays were developed to focus on rapid, low-cost, stable detection for clinical diagnosis and food safety monitoring. In this work, a novel portable cartridge voltage-sensitive micropump immunosensor (CVMS) biosensing device based on the integration of the microchannel circuit biosensing principle and polydopamine (PDA) was presented for rapid and sensitive detection of pathogenic factors in real samples at trace levels. The CVMS can sensitively evaluate voltage signal changes caused by clogging effects in the closed-loop circuit when the insulated microspheres pass through the microchannel. The targets could trigger the immune reaction between antibody-antigens that leads to the change in the concentration of horseradish peroxidase (HRP). And the HRP was further employed to catalyze the polymerization of dopamine into PDA, resulting in the rapid formation of the magnetic @PDA nanoparticles (MNP@PDA) with core-shell structures. The abundant functional groups on the MNP@PDA surface can efficiently adsorb polystyrene microspheres, thus causing changes in the number of polystyrene microspheres (PS). The CVMS can accurately monitor the change of PS with a portable device, which weighs less than 0.8 kg and costs only $50. The completion of CVMS takes 90 min to complete. The limit of detection of this immunosensor for procalcitonin and ochratoxin A were 42 pg/mL and 77 pg/mL, respectively, which improved about 15 folds and 38 folds, respectively, than those of enzyme-linked immunosorbent assay.

Universal and rapid detection of atrazine and bisphenol A using a reusable optical fiber chemiluminescent biosensor

Timely and accurately detection of small molecule pollutants is quite necessary to control environmental pollution and reduce harmfulness. Herein, a reusable optical fiber chemiluminescent biosensor (ROFC) was proposed for universal and rapid detection of two representative pollutants, pesticide atrazine (ATZ) and endocrine disruptor bisphenol A (BPA). The optical fiber modified with hapten-protein conjugates was regarded as both bio-probe and chemiluminescence signal transmission element, which effectively improved the light transmission efficiency and signal-to-noise ratio of the system. High-sensitive chemiluminescence signal detection is realized with a miniaturized ultrasensitive photodiode detector. Good regeneration performance of bio-probe can reduce detection cost and ensure detection reproducibility. Based on indirect competitive immunoassay principle, the chemiluminescence signal decreased with increasing pollutant concentration resulting from the less amount of antibody combined on the bio-probe surface. Under optimal conditions, the whole assay was achieved within 25 min with linear range of 1-100 μg/L and detection limits (LOD) for atrazine and BPA are 0.029 μg/L and 0.025 μg/L, respectively. The immunosensing optical fiber probe can be reused for 150 times at least without losing obvious bioactivity. The method was successfully applied to the detection of ATZ and BPA in three environmental samples, where recoveries between 93.4% and 116.6% were achieved. The ROFC biosensor provides a feasible platform for rapid detection of multiple small molecule pollutants in the environment.

A fluorescent biosensor for Cd2+ detection in water samples based on Cd2+-fueled wheel DNAzyme walker and its logic gate applications

A fluorescent biosensor was developed for Cd²⁺ detection based on a Cd²⁺-fueled wheel DNAzyme walker. Cd²⁺ can activate the wheel to roll along the DNA walking tracks through DNAzyme cleavage and toehold-mediated strand displacement. The substrate strand was modified with BHQ and Cy5. Through continuous cleavage reactions toward the substrate strands, a high fluorescence signal can be obtained. The biosensor is ultrasensitive, and the detection limit is 0.2 pM (S/N = 3). The fluorescent assay is robust and has been applied to the determination of Cd²⁺ in real water samples with good accuracy and reliability. Using Cd²⁺, Pb²⁺, and Hg²⁺ as the three inputs, we also construct a concatenated AND logic gate. The input combination of (111) can produce an output of 1. Other input combinations produce an output of 0. Our proposed detection platform and logic system hold great promise for the ultrasensitive and intelligent sensing of different heavy metal ions in water samples.

Anthracycline-Functionalized Dextran as a New Signal Multiplication Tagging Approach for Immunoassay

The most used kind of immunoassay is enzyme-linked immunosorbent assay (ELISA); however, enzymes suffer from steric effects, low stability, and high cost. Our research group has been developing quinone-linked immunosorbent assay (QuLISA) as a new promising approach for stable and cost-efficient immunoassay. However, the developed QuLISA suffered from low water-solubility of synthesized quinone labels and their moderate sensitivity. Herein, we developed a new approach for signal multiplication of QuLISA utilizing the water-soluble quinone anthracycline, doxorubicin, coupled with dextran for signal multiplication. A new compound, Biotin-DexDox, was prepared in which doxorubicin was assembled on oxidized dextran 40, and then it was biotinylated. The redox-cycle-based chemiluminescence and the colorimetric reaction of Biotin-DexDox were optimized and evaluated, and they showed very good sensitivity down to 0.25 and 0.23 nM, respectively. Then, Biotin-DexDox was employed for the detection of biotinylated antibodies utilizing avidin as a binder and a colorimetric assay of the formed complex through its contained doxorubicin redox reaction with NaBH₄ and imidazolium salt yielding strong absorbance at 510 nm. The method could detect the plate-fixed antibody down to 0.55 nM. Hence, the application of Biotin-DexDox in QuLISA was successfully demonstrated and showed a significant improvement in its sensitivity and applicability to aqueous assays.

Development of signal multiplication system for quinone linked immunosorbent assay (Multi-QuLISA) by using poly-l-lysine dendrigraft and 1,2-naphthoquinone-4-sulfonate as enzyme-free tag

A sensitive and stable signal multiplied quinone-linked immunosorbent assay (Multi-QuLISA) was developed. In Multi-QuLISA, an oligomerized quinone linked to biotin, namely biotin-8mer-naphthoquinone (Bio8mer-NQ), is used as a signal-generating label. Bio8mer-NQ is formed from a dendrigraft poly-l-lysine generation 1 (DPLL G1), a controlled branched oligomer composed of eight lysine moieties with nine free amino groups as a backbone. One of the nine amino groups of DPLL G1 is attached to biotin moiety, while the other eight are attached to 1,2-naphthoquinone-4-sulfonate (NQS). Bio8mer-NQ labels a biotinylated detection antibody using avidin as a co-binder. Then, multi-quinones in Bio8mer-NQ undergo a redox cycle with dithiothreitol and luminol, generating strong chemiluminescence. Standard ELISA uses a label enzyme that suffers from vulnerability in different conditions and poor stability. Bio8mer-NQ showed better stability than the enzyme (biotin-HRP) under different drastic pH and temperature conditions, hydrolytic enzymes, etc. Furthermore, Bio8mer-NQ was used as both chemiluminescence and colorimetric label based on the redox cycle of quinone, and it had LODs of 1.5 and 6.5 nM, respectively. The method could detect biotinylated immunocomplex in an in-house designed immunoassay down to 0.2 nM, which is about 25 times more sensitive than biotin HRP. Eventually, Bio8mer-NQ was applied successfully in Multi-QuLISA for detecting β-casein with a sensitivity of 3.2 ng/mL, while the conventional ELISA had an LOD of 35 ng/mL. Overall, Bio8mer-NQ is a stable compound that could be used as an excellent replacement for the enzyme in immunoassay and can be used in both colorimetric and chemiluminescence assays with good sensitivity.

Recent advancements in nucleic acid detection with microfluidic chip for molecular diagnostics

The coronavirus disease 2019 (COVID-19) has extensively promoted the application of nucleic acid testing technology in the field of clinical testing. The most widely used polymerase chain reaction (PCR)-based nucleic acid testing technology has problems such as complex operation, high requirements of personnel and laboratories, and contamination. The highly miniaturized microfluidic chip provides an essential tool for integrating the complex nucleic acid detection process. Various microfluidic chips have been developed for the rapid detection of nucleic acid, such as amplification-free microfluidics in combination with clustered regularly interspaced short palindromic repeats (CRISPR). In this review, we first summarized the routine process of nucleic acid testing, including sample processing and nucleic acid detection. Then the typical microfluidic chip technologies and new research advances are summarized. We also discuss the main problems of nucleic acid detection and the future developing trend of the microfluidic chip.