Self-Assembling Peptide Nanofibrous Hydrogel on Immediate Hemostasis and Accelerative Osteosis

Emerging Frontiers in In Situ Forming Hydrogels for Enhanced Hemostasis and Accelerated Wound Healing

With a surge in the number of accidents and chronic wounds worldwide, there is a growing need for advanced hemostatic and wound care solutions. In this regard, in situ forming hydrogels have emerged as a revolutionary biomaterial due to their inherent properties, which include biocompatibility, biodegradability, porosity, and extracellular matrix (ECM)-like mechanical strength, that render them ideal for biomedical applications. This review demonstrates the advancements of in situ forming hydrogels, tracing their evolution from injectable to more sophisticated forms, such as sprayable and 3-D printed hydrogels. These hydrogels are designed to modulate the pathophysiology of wounds, enhancing hemostasis and facilitating wound repair. The review presents different methodologies for in situ forming hydrogel synthesis, spanning a spectrum of physical and chemical cross-linking techniques. Furthermore, it showcases the adaptability of hydrogels to the dynamic requirements of wound healing processes. Through a detailed discussion, this article sheds light on the multifunctional capabilities of these hydrogels such as their antibacterial, anti-inflammatory, and antioxidant properties. This review aims to inform and inspire continued advancement in the field, ultimately contributing to the development of sophisticated wound care solutions that meet the complexity of clinical needs.

A parathyroid hormone related supramolecular peptide for multi-functionalized osteoregeneration

Supramolecular peptide nanofiber hydrogels are emerging biomaterials for tissue engineering, but it is difficult to fabricate multi-functional systems by simply mixing several short-motif-modified supramolecular peptides because relatively abundant motifs generally hinder nanofiber cross-linking or the formation of long nanofiber. Coupling bioactive factors to the assembling backbone is an ideal strategy to design multi-functional supramolecular peptides in spite of challenging synthesis and purification. Herein, a multi-functional supramolecular peptide, P1R16, is developed by coupling a bioactive factor, parathyroid hormone related peptide 1 (PTHrP-1), to the basic supramolecular peptide RADA16-Ⅰ via solid-phase synthesis. It is found that P1R16 self-assembles into long nanofibers and co-assembles with RADA16-Ⅰ to form nanofiber hydrogels, thus coupling PTHrP-1 to hydrogel matrix. P1R16 nanofiber retains osteoinductive activity in a dose-dependent manner, and P1R16/RADA16-Ⅰ nanofiber hydrogels promote osteogenesis, angiogenesis and osteoclastogenesis in vitro and induce multi-functionalized osteoregeneration by intramembranous ossification and bone remodeling in vivo when loaded to collagen (Col) scaffolds. Abundant red blood marrow formation, ideal osteointegration and adapted degradation are observed in the 50% P1R16/Col scaffold group. Therefore, this study provides a promising strategy to develop multi-functional supramolecular peptides and a new method to topically administrate parathyroid hormone or parathyroid hormone related peptides for non-healing bone defects.

Injectable Extracellular Matrix-Inspired Hemostatic Hydrogel Composed of Hyaluronan and Gelatin with Shear-Thinning and Self-Healing

Injectable ECM-inspired hydrogels composed of hyaluronic acid and gelatin are biocompatible and potentially useful for various medical applications. We developed injectable hydrogels composed of monoaldehyde-modified hyaluronic acid (HA-mCHO) and carbohydrazide-modified gelatin (GL-CDH), "HA/GL gel", whose ratios of HA-mCHO to GL-CDH were different. The hydrogels exhibited gelation times shorter than 3 s. In addition, the hydrogels showed strong shear-thinning and self-healing properties, mainly because of the dynamic covalent bonding of Schiff bases between HA-mCHO and GL-CDH. This hydrogel degraded in the mice's peritoneum for a week and showed excellent biocompatibility. Moreover, the hydrogel showed a higher breaking strength than fibrin glue in the lap shear test of porcine skin. Finally, the hydrogels decreased bleeding to as low as fibrin glue without using thrombin and fibrinogen in a mouse liver bleeding model in both single- and double-barreled syringe administrations. HA/GL gels have the potential for excellent biocompatibility and hemostasis in clinical settings.

Stimuli-responsive peptide hydrogels for biomedical applications

Stimuli-responsive hydrogels can respond to external stimuli with a change in the network structure and thus have potential application in drug release, intelligent sensing, and scaffold construction. Peptides possess robust supramolecular self-assembly ability, enabling spontaneous formation of nanostructures through supramolecular interactions and subsequently hydrogels. Therefore, peptide-based stimuli-responsive hydrogels have been widely explored as smart soft materials for biomedical applications in the last decade. Herein, we present a review article on design strategies and research progress of peptide hydrogels as stimuli-responsive materials in the field of biomedicine. The latest design and development of peptide hydrogels with responsive behaviors to stimuli are first presented. The following part provides a systematic overview of the functions and applications of stimuli-responsive peptide hydrogels in tissue engineering, drug delivery, wound healing, antimicrobial treatment, 3D cell culture, biosensors, etc. Finally, the remaining challenges and future prospects of stimuli-responsive peptide hydrogels are proposed. It is believed that this review will contribute to the rational design and development of stimuli-responsive peptide hydrogels toward biomedical applications.

Rational Design of Bioactive Materials for Bone Hemostasis and Defect Repair

Everyday unnatural events such as trauma, accidents, military conflict, disasters, and even medical malpractice create open wounds and massive blood loss, which can be life-threatening. Fractures and large bone defects are among the most common types of injuries. Traditional treatment methods usually involve rapid hemostasis and wound closure, which are convenient and fast but may result in various complications such as nerve injury, deep infection, vascular injury, and deep hematomas. To address these complications, various studies have been conducted on new materials that can be degraded in the body and reduce inflammation and abscesses in the surgical area. This review presents the latest research progress in biomaterials for bone hemostasis and repair. The mechanisms of bone hemostasis and bone healing are first introduced and then principles for rational design of biomaterials are summarized. After providing representative examples of hemostatic biomaterials for bone repair, future challenges and opportunities in the field are proposed.

Self-assembling peptide RADA16: a promising scaffold for tissue engineering and regenerative medicine

RADA16 is a peptide-based biomaterial whose acidic aqueous solution spontaneously forms an extracellular matrix-like 3D structure within seconds upon contact with physiological pH body fluids. Meanwhile, its good biocompatibility, low immunogenicity, nontoxic degradation products and ease of modification make it an ideal scaffold for tissue engineering. RADA16 is a good delivery vehicle for cells, drugs and factors. Its shear thinning and thixotropic properties allow it to fill tissue voids by injection and not to swell. However, the weaker mechanical properties and poor hydrophilicity are troubling limitations of RADA16. To compensate for this limitation, various functional groups and polymers have been designed to modify RADA16, thus contributing to its scope and progress in the field of tissue engineering.

Short Peptide Nanofiber Biomaterials Ameliorate Local Hemostatic Capacity of Surgical Materials and Intraoperative Hemostatic Applications in Clinics

Short designer self-assembling peptide (dSAP) biomaterials are a new addition to the hemostat group. It may provide a diverse and robust toolbox for surgeons to integrate wound microenvironment with much safer and stronger hemostatic capacity than conventional materials and hemostatic agents. Especially in noncompressible torso hemorrhage (NCTH), diffuse mucosal surface bleeding, and internal medical bleeding (IMB), with respect to the optimal hemostatic formulation, dSAP biomaterials are the ingenious nanofiber alternatives to make bioactive neural scaffold, nasal packing, large mucosal surface coverage in gastrointestinal surgery (esophagus, gastric lesion, duodenum, and lower digestive tract), epicardiac cell-delivery carrier, transparent matrix barrier, and so on. Herein, in multiple surgical specialties, dSAP-biomaterial-based nano-hemostats achieve safe, effective, and immediate hemostasis, facile wound healing, and potentially reduce the risks in delayed bleeding, rebleeding, post-operative bleeding, or related complications. The biosafety in vivo, bleeding indications, tissue-sealing quality, surgical feasibility, and local usability are addressed comprehensively and sequentially and pursued to develop useful surgical techniques with better hemostatic performance. Here, the state of the art and all-round advancements of nano-hemostatic approaches in surgery are provided. Relevant critical insights will inspire exciting investigations on peptide nanotechnology, next-generation biomaterials, and better promising prospects in clinics.

Hemostasis Strategies and Recent Advances in Nanomaterials for Hemostasis

The development of materials that effectively stop bleeding and prevent wound adhesion is essential in both military and medical fields. However, traditional hemostasis methods, such as cautery, tourniquets, and gauze, have limitations. In recent years, new nanomaterials have gained popularity in medical and health fields due to their unique microstructural advantages. Compared to traditional materials, nanomaterials offer better adhesion, versatility, and improved bioavailability of traditional medicines. Nanomaterials also possess advantages such as a high degree and stability, self-degradation, fewer side effects, and improved wound healing, which make them ideal for the development of new hemostatic materials. Our review provides an overview of the currently used hemostatic strategies and materials, followed by a review of the cutting-edge nanomaterials for hemostasis, including nanoparticles and nanocomposite hydrogels. The paper also briefly describes the challenges faced by the application of nanomaterials for hemostasis and the prospects for their future development.

High-strength, antibacterial, antioxidant, hemostatic, and biocompatible chitin/PEGDE-tannic acid hydrogels for wound healing

Natural polymer hydrogels are widely used in various aspects of biomedical engineering, such as wound repair, owing to their abundance and biosafety. However, the low strength and the lack of function restricted their development and application scope. Herein, we fabricated novel multifunctional chitin/PEGDE-tannic acid (CPT) hydrogels through chemical- and physical-crosslinking strategies, using chitin as the base material, polyethylene glycol diglycidyl ether (PEGDE) and tannic acid (TA) as crosslinking agents, and 90 % ethanol as the regenerative bath. CPT hydrogels maintained a stable three-dimensional porous structure with suitable water contents and excellent biocompatibility. The mechanical properties of hydrogels were greatly improved (tensile stress up to 5.43 ± 1.14 MPa). Moreover, CPT hydrogels had good antibacterial, antioxidant, and hemostatic activities and could substantially promote wound healing in a rat model of full-thickness skin defect by regulating inflammatory responses and promoting collagen deposition and blood vessel formation. Therefore, this work provides a useful strategy to fabricate novel multifunctional CPT hydrogels with excellent mechanical, antibacterial, antioxidant, hemostatic, and biocompatible properties. CPT hydrogels could be promising candidates for wound healing.

Recent Advances in Antimicrobial Peptide Hydrogels

Advances in the number and type of available biomaterials have improved medical devices such as catheters, stents, pacemakers, prosthetic joints, and orthopedic devices. The introduction of a foreign material into the body comes with a risk of microbial colonization and subsequent infection. Infections of surgically implanted devices often lead to device failure, which leads to increased patient morbidity and mortality. The overuse and improper use of antimicrobials has led to an alarming rise and spread of drug-resistant infections. To overcome the problem of drug-resistant infections, novel antimicrobial biomaterials are increasingly being researched and developed. Hydrogels are a class of 3D biomaterials consisting of a hydrated polymer network with tunable functionality. As hydrogels are customizable, many different antimicrobial agents, such as inorganic molecules, metals, and antibiotics have been incorporated or tethered to them. Due to the increased prevalence of antibiotic resistance, antimicrobial peptides (AMPs) are being increasingly explored as alternative agents. AMP-tethered hydrogels are being increasingly examined for antimicrobial properties and practical applications, such as wound-healing. Here, we provide a recent update, from the last 5 years of innovations and discoveries made in the development of photopolymerizable, self-assembling, and AMP-releasing hydrogels.

Engineered Hemostatic Biomaterials for Sealing Wounds

Hemostatic biomaterials show great promise in wound control for the treatment of uncontrolled bleeding associated with damaged tissues, traumatic wounds, and surgical incisions. A surge of interest has been directed at boosting hemostatic properties of bioactive materials via mechanisms triggering the coagulation cascade. A wide variety of biocompatible and biodegradable materials has been applied to the design of hemostatic platforms for rapid blood coagulation. Recent trends in the design of hemostatic agents emphasize chemical conjugation of charged moieties to biomacromolecules, physical incorporation of blood-coagulating agents in biomaterials systems, and superabsorbing materials in either dry (foams) or wet (hydrogel) states. In addition, tough bioadhesives are emerging for efficient and physical sealing of incisions. In this Review, we highlight the biomacromolecular design approaches adopted to develop hemostatic bioactive materials. We discuss the mechanistic pathways of hemostasis along with the current standard experimental procedures for characterization of the hemostasis efficacy. Finally, we discuss the potential for clinical translation of hemostatic technologies, future trends, and research opportunities for the development of next-generation surgical materials with hemostatic properties for wound management.

Supramolecular Peptide Nanofiber Hydrogels for Bone Tissue Engineering: From Multihierarchical Fabrications to Comprehensive Applications

Bone tissue engineering is becoming an ideal strategy to replace autologous bone grafts for surgical bone repair, but the multihierarchical complexity of natural bone is still difficult to emulate due to the lack of suitable biomaterials. Supramolecular peptide nanofiber hydrogels (SPNHs) are emerging biomaterials because of their inherent biocompatibility, satisfied biodegradability, high purity, facile functionalization, and tunable mechanical properties. This review initially focuses on the multihierarchical fabrications by SPNHs to emulate natural bony extracellular matrix. Structurally, supramolecular peptides based on distinctive building blocks can assemble into nanofiber hydrogels, which can be used as nanomorphology-mimetic scaffolds for tissue engineering. Biochemically, bioactive motifs and bioactive factors can be covalently tethered or physically absorbed to SPNHs to endow various functions depending on physiological and pharmacological requirements. Mechanically, four strategies are summarized to optimize the biophysical microenvironment of SPNHs for bone regeneration. Furthermore, comprehensive applications about SPNHs for bone tissue engineering are reviewed. The biomaterials can be directly used in the form of injectable hydrogels or composite nanoscaffolds, or they can be used to construct engineered bone grafts by bioprinting or bioreactors. Finally, continuing challenges and outlook are discussed.

Self-Assembling Peptide-Based Hydrogels for Wound Tissue Repair

Wound healing is a long-term, multistage biological process that includes hemostasis, inflammation, proliferation, and tissue remodeling and requires intelligent designs to provide comprehensive and convenient treatment. The complexity of wounds has led to a lack of adequate wound treatment materials, which must systematically regulate unique wound microenvironments. Hydrogels have significant advantages in wound treatment due to their ability to provide spatiotemporal control over the wound healing process. Self-assembling peptide-based hydrogels are particularly attractive due to their innate biocompatibility and biodegradability along with additional advantages including ligand-receptor recognition, stimulus-responsive self-assembly, and the ability to mimic the extracellular matrix. The ability of peptide-based materials to self-assemble in response to the physiological environment, resulting in functionalized microscopic structures, makes them conducive to wound treatment. This review introduces several self-assembling peptide-based systems with various advantages and emphasizes recent advances in self-assembling peptide-based hydrogels that allow for precise control during different stages of wound healing. Moreover, the development of multifunctional self-assembling peptide-based hydrogels that can regulate and remodel the wound immune microenvironment in wound therapy with spatiotemporal control has also been summarized. Overall, this review sheds light on the future clinical and practical applications of self-assembling peptide-based hydrogels.

An injectable thermosensitive hydrogel with self-assembled peptide coupled with antimicrobial peptide for enhanced wound healing

Wound dressing based on thermosensitive hydrogel shows advantages over performed traditional dressings such as rapid reversible sol-gel-sol transition property and the capacity of filling the irregular wound area. Herein, RA-Amps...

Rapid hemostasis and high bioactivity cerium-containing mesoporous bioglass for hemostatic materials

A two-step-acid-catalyzed-self-assembly method was used to prepare cerium-containing mesoporous bioactive glass with P123 as a template. The results showed that MBG without cerium and MBG with cerium slightly affected its surface area, and its water absorption rate was significantly higher. In vitro coagulation experiments showed that Ce-MBG significantly reduces prothrombin time (PT) and activated partial thromboplastin time (APTT), indicating that MBG containing Ce could promote coagulation and platelet adhesion compared with MBG. These suggested that Ce-MBG may be a good dressing with hemostatic properties, which could shorten the bleeding time of the wound and control the bleeding.

Advances in the development of hemostatic biomaterials for medical application

BACKGROUND

Medical hemostatic biological materials are necessary for the development of the process of preventing and stopping damaged intravascular bleeding. In the process, some red blood cells and white blood cells are trapped in nets. The resulting plug is called a blood clot. This is often a good step in wound healing, but separation of blood clots from blood vessel walls can cause serious health problems.

MAIN BODY

The advance in the development of hemostatic biomaterials is necessary for biomedical application. Firstly, the historical background of artificial hemostasis has been included and the current research of hemostasis has been included in more detail. Secondly, the current research of hemostasis has been included on the oxidized cellulose-based hemostatic biomaterials such as starch based on composite cross-linking hemostatic networks, hemostatic materials on NHS-esters, hemostatic agent from local materials and biomaterials for hemostatic management. Thirdly, polysaccharide hemostatic materials, bio-inspired adhesive catechol-conjugated chitosan, mesoporous silica and bioactive glasses for improved hemostasis, minimally invasive hemostatic biomaterials and chitosan-base materials for hemostatic application have been included. Fourthly, the biological properties of natural hemostatic agent by plasma technology and the hemostatic agents based on gelatin-microbial transglutaminase mixes have been also included.

CONCLUSION

Current research on hemostasis includes hemostatic biomaterials such as cellulose-based hemostatic starch based on a complex cross-linked hemostatic network. It also includes polysaccharide hemostatic materials, biomimetic adhesive catechol-binding chitosan, mesoporous silica or physiologically active glass for hemostatic improvement, minimally invasive hemostatic chitosan-based materials, and gelatin-microbial transglutaminase-based hemostatic agents. Future studies should focus on modular combination of hemostatic imitation and reinforcement mechanisms of different materials and technologies to find the optimal system to promote and strengthen active platelet or platelet imitation aggregation in bleeding sites. The second optionally increases the production of thrombin and fiber formation at the site. Third, the formed fibrin biopolymer network has strengthened to reduce thrombosis and amplify hemostasis.

"PP-type" self-assembling peptides with superior rheological properties

The ionic-complementary self-assembling peptides discovered by Zhang Shuguang have solution-to-gel (sol-gel) transition capacity and one such peptide RADA16 has been commercialized into hemostatic agents. However, their sol-gel transition ability was not obvious because the peptide aqueous solution with a concentration greater than 1% w/v appeared to be thick and viscous. The current report describes PP-type self-assembling peptides. In addition to the ionic-complementary sequence, they have prolines at both ends of the sequence. This feature has led to better solubility, lower viscosity of the peptide solution, and simplified synthesis and purification processes while maintaining the great gelling performance of the ionic-complementary peptides. The PP-type peptides self-assembled into a well-organized nanofiber scaffold as shown by TEM. Among the PP-type peptides, the PRVDP9 sequence peptide was tested as a hemostatic agent and a mucosal elevating agent. The results were comparable to the classic RADA16. The PP-type self-assembling peptides have superior sol-gel transition ability. Therefore, it is predicted that they will be more suitable to be transported through catheters or endoscopes and have higher commercialization potential as compared with the classic self-assembling peptide sequences.

From structure to application: Progress and opportunities in peptide materials development

For over 20 years, peptide materials in their hydrogel or soluble fibril form have been used for biomedical applications such as drug delivery, cell culture, vaccines, and tissue regeneration. To facilitate the translation of these materials, key areas of research still need to be addressed. Their structural characterization lags compared to amyloid proteins. Many of the structural features designed to guide materials formation are primarily being characterized by their observation in atomic resolution structures of amyloid assemblies. Herein, these motifs are examined in relation to peptide designs identifying common interactions that drive assembly and provide structural specificity. Current efforts to design complex structures, as reviewed here, highlight the need to extend the structural revolution of amyloid proteins to peptide assemblies to validate design principles. With respect to clinical applications, the fundamental interactions and responses of proteins, cells, and the immune system to peptide materials are still not well understood. Only a few trends are just now emerging for peptide materials interactions with biological systems. Understanding how peptide material properties influence these interactions will enable the translation of materials towards current and emerging applications.

Synthesis, Characterization and Evaluation of Peptide Nanostructures for Biomedical Applications

There is a challenging need for the development of new alternative nanostructures that can allow the coupling and/or encapsulation of therapeutic/diagnostic molecules while reducing their toxicity and improving their circulation and in-vivo targeting. Among the new materials using natural building blocks, peptides have attracted significant interest because of their simple structure, relative chemical and physical stability, diversity of sequences and forms, their easy functionalization with (bio)molecules and the possibility of synthesizing them in large quantities. A number of them have the ability to self-assemble into nanotubes, -spheres, -vesicles or -rods under mild conditions, which opens up new applications in biology and nanomedicine due to their intrinsic biocompatibility and biodegradability as well as their surface chemical reactivity via amino- and carboxyl groups. In order to obtain nanostructures suitable for biomedical applications, the structure, size, shape and surface chemistry of these nanoplatforms must be optimized. These properties depend directly on the nature and sequence of the amino acids that constitute them. It is therefore essential to control the order in which the amino acids are introduced during the synthesis of short peptide chains and to evaluate their in-vitro and in-vivo physico-chemical properties before testing them for biomedical applications. This review therefore focuses on the synthesis, functionalization and characterization of peptide sequences that can self-assemble to form nanostructures. The synthesis in batch or with new continuous flow and microflow techniques will be described and compared in terms of amino acids sequence, purification processes, functionalization or encapsulation of targeting ligands, imaging probes as well as therapeutic molecules. Their chemical and biological characterization will be presented to evaluate their purity, toxicity, biocompatibility and biodistribution, and some therapeutic properties in vitro and in vivo. Finally, their main applications in the biomedical field will be presented so as to highlight their importance and advantages over classical nanostructures.

Self-assembling peptides as vectors for local drug delivery and tissue engineering applications

Molecular self-assembly has forged a new era in the development of advanced biomaterials for local drug delivery and tissue engineering applications. Given their innate biocompatibility and biodegradability, self-assembling peptides (SAPs) have come in the spotlight of such applications. Short and water-soluble SAP biomaterials associated with enhanced pharmacokinetic (PK) and pharmacodynamic (PD) responses after the topical administration of the therapeutic systems, or improved regenerative potential in tissue engineering applications will be the focus of the current review. SAPs are capable of generating supramolecular structures using a boundless array of building blocks, while peptide engineering is an approach commonly pursued to encompass the desired traits to the end composite biomaterials. These two elements combined, expand the spectrum of SAPs multi-functionality, constituting them potent biomaterials for use in various biomedical applications.

Self-assembling peptide-based hydrogels: Fabrication, properties, and applications

The hierarchical formation of self-assembling peptide-based hydrogels (SAPHs) starts from peptide to nanofibers, following with the entanglement into hydrogels with nanofibrous network. Such characteristic structure and extraordinary biocompatibility, and the peptide components endow the SAPHs with diverse applications in biotechnological field. Therefore, the thorough comprehension of SAPHs is significant to broadening their application. In this review, fabrication, properties, and biological applications of the SAPHs are introduced, and the factors influencing the synthesis process as well as the properties of the SAPHs products are also systematically explained. Meanwhile, we conclude the problems to be solved and provide our perspective to the future development of SAPHs in the biotechnology.

In Situ implantable, post-trauma microenvironment-responsive, ROS Depletion Hydrogels for the treatment of Traumatic brain injury

Traumatic brain injury (TBI) generates excess reactive oxygen species (ROS), which can exacerbate secondary injury and result in disability and death. Secondary injury cascades can trigger the release of uncontrolled ROS into the surrounding normal brain tissue, forming an extended pool of ROS, which leads to massive neuronal death. Here, we developed an injectable, post-trauma microenvironment-responsive, ROS depletion hydrogel embedded curcumin (Cur) (TM/PC) for reducing ROS levels in damaged brain tissue to promote the regeneration and recovery of neurons. Hydrogel was composed of three parts: (1) Hydrophobic poly (propylene sulfide)120 (PPS120) was synthesized, with a ROS quencher and H2O2-responsive abilities, to embed Cur. (2) Matrix metalloproteinase (MMP)-responsive triglycerol monostearate (TM) was used to cover the PPS120 to form a TM/P hydrogel. (3) Cur could further eradicate the ROS, promoting the regeneration and recovery of neurons. In two postoperative TBI models, TM/PC hydrogel effectively responded the TBI surgical environment and released drug. TM/PC hydrogel significantly depleted ROS and reduced brain edema. In addition, reactive astrocytes and activated microglia were decreased, growth-associated protein 43 (GAP43) and doublecortin (DCX) were increased, suggested that TM/PC hydrogel had the strongest anti-inflammatory effect and effectively promoted nerve regeneration after TBI. This study provides new information for the management of TBI to prevent the secondary spread of damage.

Rapid Hemostasis Resulting from the Synergism of Self-Assembling Short Peptide and O-Carboxymethyl Chitosan

The development of novel hemostatic agents with distinct modes of action from traditional ones remains a formidable challenge. Self-assembling peptide hydrogels have emerged as a new hemostatic material, not only because of their inherent biocompatibility and biodegradability but also their designability. Especially, rational molecular design can make peptides and their hydrogelation responsive to biological cues. In this study, we demonstrated that transglutaminase-catalyzed reactions not only occurred among designed short peptide I₃QGK molecules but also between the peptide and a natural polysaccharide O-carboxymethyl chitosan. Because Factor XIII in the blood can rapidly convert into activated transglutaminase (Factor XIIIa) upon bleeding, these enzymatic reactions, together with the electrostatic attraction between the two hemostatic agents, induced a strong synergetic effect in promoting hydrogelation, blood coagulation, and platelet adhesion, eventually leading to rapid hemostasis. The study presents a promising strategy for developing alternative hemostatic materials and methods.

Safety and feasibility of PuraStat® in laparoscopic colorectal surgery (Feasibility study)

Introduction: Haemorrhage remains a major cause of morbidity and death in all surgical specialties. The aim of this study was to analyse the feasibility of PuraStat^®, a new synthetic haemostatic device, made of self-assembling peptides in laparoscopic colorectal surgery.Material and methods: This was a prospective observational non-randomised study. Consecutive patients undergoing laparoscopic colorectal surgery were enrolled. Inclusion criterion was the need employ a secondary method of haemostasis when traditional methods such as conventional pressure or utilization of energy devices to control the bleeding were either insufficient or not recommended.Results: Twenty patients were enrolled. The mean time to apply the product was 40 secs (±17 secs), whereas the mean time to achieve haemostasis was 17.5 secs (±3.5 secs). There were no post-operative complications in this cohort of 20 patients. Mean operative time overall was 185 mins (±45.2 mins). None of the patients experienced delayed post-operative bleeding and the mean hospital stay was five days (±3,4).Conclusions: We demonstrated that PuraStat^® can be easily used in laparoscopic surgery and it is a safe, effective haemostatic agent. This is a feasibility study and additional controlled studies would be useful in the future.

Newly Identified HNP-F from Human Neutrophil Peptide-1 Promotes Hemostasis

Active hemostatic agents can play a crucial role in saving patients' lives during surgery. Active hemostats have several advantages including utilization of natural blood coagulation and biocompatibility. Among them, although human neutrophil peptide-1 (HNP-1) has been previously reported with the hemostatic mechanism, which part of HNP-1 facilitates the hemostatic activity is not known. Here, a partial peptide (HNP-F) promoting hemostasis, originating from HNP-1, has been newly identified by the blood coagulation ability test. HNP-F shows the best hemostatic effect between the anterior half and posterior half of peptides. Moreover, microscopic images show platelet aggregation and an increase in the concentration of platelet factor 4, and the scanning electron microscope image of platelets support platelet activation by HNP-F. Thromboelastography indicates decreased clotting time and increased physical properties of blood clotting. Mouse liver experiments demonstrate improved hemostatic effect by treatment of peptide solution. Cell viability and hemolysis assays confirm the HNP-F's biosafety. It is hypothesized that the surface charge and structure of HNP-F could be favorable to interact with fibrinogen or thrombospondin-1. Collectively, because HNP-F as an active peptide hemostat has many advantages, it could be expected to become a potent hemostatic biomaterial, additive or pharmaceutical candidate for various hemostatic applications.

Blood interactions with nano- and microfibers: Recent advances, challenges and applications in nano- and microfibrous hemostatic agents

Nanofibrous materials find a wide range of applications, such as vascular grafts, tissue-engineered scaffolds, or drug delivery systems. This phenomenon can be attributed to almost arbitrary biomaterial modification opportunities created by a multitude of polymers used to form nanofibers, as well as by surface functionalization methods. Among these applications, the hemostatic activity of nanofibrous materials is gaining more and more interest in biomedical research. It is therefore crucial to find both materials and nanofiber structural properties that affect organism responses. The present review critically analyzes the response of blood elements to natural and synthetic polymers, and their blends and composites. Also assessed in this review is the incorporation of pro-coagulative substances or drugs that can decrease bleeding time. The review also discusses the main animal models that were used to assess hemostatic agent safety and effectiveness. STATEMENT OF SIGNIFICANCE: The paper contains an in-depth review of the most representative studies recently published in the topic of nanofibrous hemostatic agents. The topic evolved from analysis of pristine polymeric nanofibers to multifunctional biomaterials. Furthermore, this study is important because it helps clarify the use of specific blood-biomaterial analysis techniques with emphasis on protein adsorption, thrombogenicity and blood coagulation. The paper should be of interest to the readers of Acta biomaterialia who are curious about the strategies and materials used for the development of multifunctional polymer nanofibers for novel blood-contacting applications.

Designer D-form self-assembling peptide scaffolds promote the proliferation and migration of rat bone marrow-derived mesenchymal stem cells

Self-assembling peptide (SAP) nanofiber hydrogel scaffolds have become increasingly important in tissue engineering due to their outstanding bioactivity and biodegradability. However, there is an initial concern on their long-term clinical use, since SAPs made of L-form amino acid sequences are sensitive to enzymatic degradation. In this study, we present a designer SAP, D-RADA16, made of all D-amino acid. We investigated the nanofiber morphology of D-RADA16, its potential for the culture of bone marrow-derived mesenchymal stem cells (BMSCs), and the proteolytic resistance of the biomaterial. The results revealed that D-RADA16 exhibited stable β-sheets and formed interwoven nanofiber scaffolds in water. D-RADA16 and L-RADA16 hydrogel scaffolds were both found to promote the proliferation and migration of rat BMSCs in the 3D cell culture microenvironment. Furthermore, the D-RADA16 scaffolds exhibited a higher proteolytic resistance against proteinase K than the L-RADA16 scaffolds. These observations indicate that D-RADA16 hydrogel scaffolds have excellent bioactivity, biocompatibility and biostability, and thus may serve as promising candidates for long-term application in vivo.

Self-assembling peptide-based building blocks in medical applications

Peptides and peptide-conjugates, comprising natural and synthetic building blocks, are an increasingly popular class of biomaterials. Self-assembled nanostructures based on peptides and peptide-conjugates offer advantages such as precise selectivity and multifunctionality that can address challenges and limitations in the clinic. In this review article, we discuss recent developments in the design and self-assembly of various nanomaterials based on peptides and peptide-conjugates for medical applications, and categorize them into two themes based on the driving forces of molecular self-assembly. First, we present the self-assembled nanostructures driven by the supramolecular interactions between the peptides, with or without the presence of conjugates. The studies where nanoassembly is driven by the interactions between the conjugates of peptide-conjugates are then presented. Particular emphasis is given to in vivo studies focusing on therapeutics, diagnostics, immune modulation and regenerative medicine. Finally, challenges and future perspectives are presented.

Self-assembly behaviors of molecular designer functional RADA16-I peptides: influence of motifs, pH, and assembly time

In the current study, we present three designer self-assembling peptides (SAPs) by appending RADA 16-I with epitopes IKVAV, RGD, and YIGSR, which have different net charges and amphiphilic properties at neutral pH. The self-assembly of the designer SAPs is intensively investigated as a function of pH, canion type, and assembly time. The morphologies of the designer SAPs were studied by atomic force microscope. The secondary structure was investigated by circular dichroism. The dynamic viscoelasticity of designer SAP solutions was examined during titration with different alkaline reagents. Our study indicated that both electrostatic and hydrophilic/hydrophobic interactions of the motifs exhibited influences on the self-assembly, consequentially affecting the fiber morphologies and rheological properties. Moreover, NaOH induced a quicker assembly/reassembly of the designer SAPs than Tris because of its strong ionic strength. Therefore, our study gained comprehensive insight into the self-assembling mechanism as references for developing RADA 16-I-based functional SAPs.

Heteropoly acids triggered self-assembly of cationic peptides into photo- and electro-chromic gels

A series of cationic peptides with alternating lysines and hydrophobic residues were designed and synthesized. These kinds of short peptides with protonated lysines can complex with anionic heteropoly acids (HPAs) to form a stable gel in water/ethanol mixed solution. Circular dichroism spectroscopy showed that the short peptides adopted a mixed conformation (β-sheet and random-coil) within the gel matrix. Scanning and transmission electron microscopy revealed that the heteropoly acids, acting as nanosized cross-linkers, first initiated the self-assembly of the cationic peptides into spherical nanostructures. Then these nanospheres accumulated with each other through hydrogen bonds and hydrophobic interactions to form large sheet-like assemblies, which further interconnected with each other forming continuous 3D network structures. Fourier-transform infrared spectroscopy showed that the structural integrity of the HPAs was maintained during the gelation process. The resultant hybrid gels showed reversible photo- and elecrtro-chromic properties. X-ray photoelectron spectroscopy revealed that the hybrid gels, capable of persistent and reversible changes of their colour, are attributed to the intervalence charge-transfer transition of the HPAs. Reversible information writing and erasing were demonstrated through a repeated photo-lithograph or electric stimuli without significant loss of the gel performance.

A self-assembling matrix-forming gel can be easily and safely applied to prevent delayed bleeding after endoscopic resections

BACKGROUND

Endoscopic resections have low morbidity and mortality. Delayed bleeding has been reported in approximately 1 - 15 % of cases, increasing with antiplatelet/anticoagulant therapy or portal hypertension. A self-assembling peptide (SAP) forming a gel could protect the mucosal defect during early healing. This retrospective trial aimed to assess the safety and efficacy of SAP in preventing delayed bleeding after endoscopic resections.

METHODS

Consecutive patients with endoscopic resections were enrolled in two tertiary referral centers. Patients with a high risk of bleeding (antiplatelet agents, anticoagulation drugs with heparin bridge therapy, and cirrhosis with portal hypertension) were also included. The SAP gel was applied immediately after resection to cover the whole ulcer bed.

RESULTS

In total, 56 patients were included with 65 lesions (esophagus [n = 8], stomach [n = 22], duodenum [n = 10], ampullary [n = 3], colon [n = 7], and rectum [n = 15]) in two centers. Among those 65 lesions, 29 were resected in high risk situations (9 uninterrupted aspirin therapy, 6 heparin bridge therapies, 5 cirrhosis and portal hypertension, 1 both cirrhosis and heparin bridge, 3 both cirrhosis and uninterrupted aspirin, 3 large duodenal lesions > 2 cm, and 2 early introduction of clopidogrel at day 1). The resection technique was endoscopic submucosal dissection (ESD) in 40 cases, en bloc endoscopic mucosal resection (EMR) in 16, piecemeal EMR in 6, and ampullectomy in 3. The mean lesion size was 37.9 mm (SD: 2.2 mm) with a mean area of 6.3 cm(2) (SD: 3.5 cm(2)). No difficulty was noted during application. Four delayed overt bleedings occurred (6.2 %) (3 hematochezia, 1 hematemesis) requiring endoscopic hemostasis. The mean hemoglobin drop off was 0.6 g/dL (- 0.6 to 3.1 g/dL). No adverse events occurred.

CONCLUSION

The use of this novel extracellular matrix scaffold may help to reduce post-endoscopic resection bleedings including in high risk situations. Its use is easy and safe but further comparative studies are warranted to completely evaluate its effectiveness.