High-Efficiency Electrocatalysis of Molecular Oxygen toward Hydroxyl Radicals Enabled by an Atomically Dispersed Iron Catalyst

Nanoconfinement-mediated non-radical enhanced pollutant degradation on Fe single-atom electrocatalyst

Heterogeneous electro-Fenton (EF) technology is an efficient approach for antibiotics degradation, but the effective mineralization of pollutants in complex actual water remains challenging due to the susceptibility of hydroxyl radical (∙OH) to environmental influences. Herein, a Fe-single atom anchored porous hollow carbon sphere (FexHCS) material with nano-confinement structure was designed for simultaneously catalyzing H2O2 to produce ∙OH and 1O2. Benefiting from oxidation of ∙OH and selective reaction of alkyl group with 1O2, the kinetic constant (k) of the FexHCS-based EF system achieves 4.13 h-1, which is 3.7 times higher than that of the traditional Fenton (1.13 h-1) under the same conditions for ofloxacin (OFL) degradation. The mineralization efficiency of OFL by FexHCS-based EF reaches 72.7 %, exceeding most of the previously reported catalysts within 1 h. The COD value of actual pharmaceutical wastewater is reduced from 801 mg L-1 to 49 mg L-1 after 5 h of treatment, and the energy consumption for wastewater treatment is calculated to be 15.9 kW h kg-1 COD-1. This work demonstrates the attractive advantages of 1O2 enhanced electro-Fenton performance in complex actual water and provides new insights into developing novel electrocatalysts for wastewater treatment.

Oxygen doping regulation of Co single atom catalysts for electro-Fenton degradation of tetracycline

Electro-Fenton is an effective process for degrading hard-to-degrade organic pollutants, such as tetracycline (TC). However, the degradation efficiency of this process is limited by the activity and stability of the cathode catalyst. Herein, a temperature gradient pyrolysis strategy and oxidation treatment is proposed to modulate the coordination environment to prepare oxygen-doped cobalt monoatomic electrocatalysts (CoNOC). The CoNOC catalysts can achieve the selectivity of 93 % for H2O2 with an electron transfer number close to 2. In the H-cell, the prepared electrocatalysts can achieve more than 100 h of H2O2 production with good stability and the yield of 1.41 mol gcatalyst-1 h-1 with an average Faraday efficiency (FE) of more than 88 %. The calculations indicate that the epoxy groups play a crucial role in modulating the oxygen reduction pathway. The O doping and unique N coordination of Co single-atom active sites (CoN(Pd)3N(Po)1O1) can effectively weaken the O2/OOH* interaction, thereby promoting the production of H2O2. Finally, the electro-Fenton system could achieve a TC degradation rate of 94.9 % for 120 min with a mineralization efficiency of 87.8 % for 180 min, which provides a reliable option for antibiotic treatment. The significant involvement of OH in the electro-Fenton process was confirmed, and the plausible mineralization pathway for TC was proposed.

Kinetics and mechanisms of non-radically and radically induced degradation of bisphenol A in a peroxymonosulfate-chloride system

Bisphenol A, a hazardous endocrine disruptor, poses significant environmental and human health threats, demanding efficient removal approaches. Traditional biological methods struggle to treat BPA wastewater with high chloride (Cl-) levels due to the toxicity of high Cl- to microorganisms. While persulfate-based advanced oxidation processes (PS-AOPs) have shown promise in removing BPA from high Cl- wastewater, their widespread application is always limited by the high energy and chemical usage costs. Here we show that peroxymonosulfate (PMS) degrades BPA in situ under high Cl- concentrations. BPA was completely removed in 30 min with 0.3 mM PMS and 60 mM Cl-. Non-radical reactive species, notably free chlorine species, including dissolved Cl2(l), HClO, and ClO- dominate the removal of BPA at temperatures ranging from 15 to 60 °C. Besides, free radicals, including •OH and Cl2 •-, contribute minimally to BPA removal at 60 °C. Based on the elementary kinetic models, the production rate constant of Cl2(l) (32.5 M-1 s-1) is much higher than HClO (6.5 × 10-4 M-1 s-1), and its degradation rate with BPA (2 × 107 M-1 s-1) is also much faster than HClO (18 M-1 s-1). Furthermore, the degradation of BPA by Cl2(l) and HClO were enlarged by 10- and 18-fold at 60 °C compared to room temperature, suggesting waste heat utilization can enhance treatment performance. Overall, this research provides valuable insights into the effectiveness of direct PMS introduction for removing organic micropollutants from high Cl- wastewater. It further underscores the critical kinetics and mechanisms within the PMS/Cl⁻ system, presenting a cost-effective and environmentally sustainable alternative for wastewater treatment.

In Situ Production of Hydroxyl Radicals via Three-Electron Oxygen Reduction: Opportunities for Water Treatment

The electro-Fenton (EF) process is an advanced oxidation technology with significant potential; however, it is limited by two steps: generation and activation of H2O2. In contrast to the production of H2O2 via the electrochemical two-electron oxygen reduction reaction (ORR), the electrochemical three-electron (3e-) ORR can directly activate molecular oxygen to yield the hydroxyl radical (⋅OH), thus breaking through the conceptual and operational limitations of the traditional EF reaction. Therefore, the 3e- ORR is a vital process for efficiently producing ⋅OH in situ, thus charting a new path toward the development of green water-treatment technologies. This review summarizes the characteristics and mechanisms of the 3e- ORR, focusing on the basic principles and latest progress in the in situ generation and efficient utilization of ⋅OH through the modulation of the reaction pathway, shedding light on the rational design of 3e- ORR catalysts, mechanistic exploration, and practical applications for water treatment. Finally, the future developments and challenges of efficient, stable, and large-scale utilization of ⋅OH are discussed based on achieving optimal 3e- ORR regulation and the potential to combine it with other technologies.

Performance enhancement and mechanism of electroenhanced peroxymonosulfate activation by single-atom Fe catalyst modified electrodes

Peroxymonosulfate-based electrochemical advanced oxidation processes (PMS-EAOPs) have great potential for sustainable water purification, so an in-depth understanding of its catalytic mechanism is imperative to facilitate its practical application. Herein, the performance enhancement and mechanism of electroenhanced PMS activation by single-atom Fe catalyst modified carbon felt was investigated. Compared with the anode, the cathode exhibited faster bisphenol A degradation (kcathode = 0.073 vs. kanode = 0.015 min-1), increased PMS consumption (98.8 vs. 10.3%), and an order of magnitude reduction of Fe dissolution (0.068 vs. 0.787 mg L-1). Mass transfer is a key factor limiting PMS activation, while the electrostriction of water in the hydrophobic region caused by cathode electric field (CEF) significantly increased mass transfer coefficient (km, cathode = 1.49 × 10-4 vs. km, anode = 2.68 × 10-5 m s-1). The enhanced activation of PMS is a synergistic result between electroactivation and catalyst-activation, which is controlled by the applied current density. 1O2 and direct electron transfer are the main active species and activation pathway, which achieve high degradation efficiency over pH 3 to 10. Density functional theory calculations prove CEF increases the adsorption energy, lengthens the O-O bond in PMS, and promotes charge transfer. A flow-through convection unit achieves sustainable operation with high removal efficiency (99.5% to 97.5%), low electrical energy consumption (0.15 kWh log-1 m-3), and low Fe leaching (0.81% of the total single atom Fe). This work reveals the critical role of electric fields in modulating Fenton-like catalytic activity, which may advance the development of advanced oxidation processes and other electrocatalytic applications.

Electrochemical treatment of simulated wastewater containing nitroaromatic compound with cobalt-titanium electrode

The Co3O4-Ti electrodes were successfully prepared via calcination method to degrade nitrogen-containing (TNP) simulate wastewater in this reaserch. SEM and EDS were employed to analyze the morphology and element composition on Co3O4-Ti electrode, revealing the successful load of cobalt element. Then the electrochemical performance was evaluated by CV and indicated a better redox performance of electrode. Furthermore, five factors as processing time (A), electrolyte concentration (B), pH (C), initial concentration of TNP (D), and current density (E) were systematic studied in electrical treatment process. The removal rate of TN could be 77%. After the optimization work by RSM, the removal rate of TN raised up to 81% with the condition as: A of 180 min, B of 0.05 M, C of 3, D of 400 mg L-1, and E of 20 mA cm-2. The sequence of significants is: C > D > A > E > B. Mechanism analysis revealed that the entire process could be divided into two stages. In the first stage, organic nitrogen compounds were converted into inorganic nitrogen species, such as NO3-N. The oxidation and reduction would react owing to the generating of ·OH at second stage in order to turn the NO3-N into NO2-N, NH4-N or N2. The activation of ·OH on the surface of Co3O4-Ti electrode possesses the exothermic nature with transition theory. The energy calculation of 1.168 eV indicated these reactions could occur spontaneously.

Electrochemical Hydrogen Peroxide Generation and Activation Using a Dual-Cathode Flow-Through Treatment System: Enhanced Selectivity for Contaminant Removal by Electrostatic Repulsion

To oxidize trace concentrations of organic contaminants under conditions relevant to surface- and groundwater, air-diffusion cathodes were coupled to stainless-steel cathodes that convert atmospheric O2 into hydrogen peroxide (H2O2), which then was activated to produce hydroxyl radicals (·OH). By separating H2O2 generation from its activation and employing a flow-through electrode consisting of stainless-steel fibers, the two processes could be operated efficiently in a manner that overcame mass-transfer limitations for O2, H2O2, and trace organic contaminants. The flexibility resulting from separate control of the two processes made it possible to avoid both the accumulation of excess H2O2 and the energy losses that take place after H2O2 has been depleted. The decrease in treatment efficacy occurring in the presence of natural organic matter was substantially lower than that typically observed in homogeneous advanced oxidation processes. Experiments conducted with ionized and neutral compounds indicated that electrostatic repulsion prevented negatively charged ·OH scavengers from interfering with the oxidation of neutral contaminants. Energy consumption by the dual-cathode system was lower than values reported for other technologies intended for small-scale drinking water treatment systems. The coordinated operation of these two cathodes has the potential to provide a practical, inexpensive way for point-of-use drinking water treatment.

Correlating active sites and oxidative species in single-atom catalyzed Fenton-like reactions

Single-atom catalysts (SACs) have gained widespread popularity in heterogeneous catalysis-based advanced oxidation processes (AOPs), owing to their optimal metal atom utilization efficiency and excellent recyclability by triggering reactive oxidative species (ROS) for target pollutant oxidation in water. Systematic summaries regarding the correlation between the active sites, catalytic activity, and reactive species of SACs have rarely been reported. This review provides an overview of the catalytic performance of carbon- and metal oxide-supported SACs in Fenton-like reactions, as well as the different oxidation pathways induced by the metal and non-metal active sites, including radical-based pathways (e.g., ·OH and SO4˙-) and nonradical-based pathways (e.g. 1O2, high-valent metal-oxo species, and direct electron transfer). Thereafter, we discuss the effects of metal types, coordination environments, and spin states on the overall catalytic performance and the generated ROS in Fenton-like reactions. Additionally, we provide a perspective on the future challenges and prospects for SACs in water purification.

Catalyst durability in electrocatalytic H2O2 production: key factors and challenges

On-demand electrocatalytic hydrogen peroxide (H2O2) production is a significant technological advancement that offers a promising alternative to the traditional anthraquinone process. This approach leverages electrocatalysts for the selective reduction of oxygen through a two-electron transfer mechanism (ORR-2e-), holding great promise for delivering a sustainable and economically efficient means of H2O2 production. However, the harsh operating conditions during the electrochemical H2O2 production lead to the degradation of both structural integrity and catalytic efficacy in these materials. Here, we systematically examine the design strategies and materials typically utilized in the electroproduction of H2O2 in acidic environments. We delve into the prevalent reactor conditions and scrutinize the factors contributing to catalyst deactivation. Additionally, we propose standardised benchmarking protocols aimed at evaluating catalyst stability under such rigorous conditions. To this end, we advocate for the adoption of three distinct accelerated stress tests to comprehensively assess catalyst performance and durability.

Size-Dependent Catalysis in Fenton-like Chemistry: From Nanoparticles to Single Atoms

State-of-the-art Fenton-like reactions are crucial in advanced oxidation processes (AOPs) for water purification. This review explores the latest advancements in heterogeneous metal-based catalysts within AOPs, covering nanoparticles (NPs), single-atom catalysts (SACs), and ultra-small atom clusters. A distinct connection between the physical properties of these catalysts, such as size, degree of unsaturation, electronic structure, and oxidation state, and their impacts on catalytic behavior and efficacy in Fenton-like reactions. In-depth comparative analysis of metal NPs and SACs is conducted focusing on how particle size variations and metal-support interactions affect oxidation species and pathways. The review highlights the cutting-edge characterization techniques and theoretical calculations, indispensable for deciphering the complex electronic and structural characteristics of active sites in downsized metal particles. Additionally, the review underscores innovative strategies for immobilizing these catalysts onto membrane surfaces, offering a solution to the inherent challenges of powdered catalysts. Recent advances in pilot-scale or engineering applications of Fenton-like-based devices are also summarized for the first time. The paper concludes by charting new research directions, emphasizing advanced catalyst design, precise identification of reactive oxygen species, and in-depth mechanistic studies. These efforts aim to enhance the application potential of nanotechnology-based AOPs in real-world wastewater treatment.

Abiotic Methane Production Driven by Ubiquitous Non-Fenton-Type Reactive Oxygen Species

Abiotic CH4 production driven by Fenton-type reactive oxygen species (ROS) has been confirmed to be an indispensable component of the atmospheric CH4 budget. While the chemical reactions independent of Fenton chemistry to ROS are ubiquitous in nature, it remains unknown whether the produced ROS can drive abiotic CH4 production. Here, we first demonstrated the abiotic CH4 production at the soil-water interface under illumination. Leveraging this finding, polymeric carbon nitrides (CNx) as a typical analogue of natural geobattery material and dimethyl sulfoxide (DMSO) as a natural methyl donor were used to unravel the underlying mechanisms. We revealed that the ROS, photocatalytically produced by CNx, can oxidize DMSO into CH4 with a high selectivity of 91.5 %. Such an abiotic CH4 production process was further expanded to various non-Fenton-type reaction systems, such as electrocatalysis, pyrocatalysis and sonocatalysis. This work provides insights into the geochemical cycle of abiotic CH4, and offers a new route to CH4 production via integrated energy development.

MOF-derived Fe/Ni@C marigold-like nanosheets as heterogeneous electro-Fenton cathode for efficient antibiotic oxytetracycline degradation

The widespread occurrence of organic antibiotic pollution in the environment and the associated harmful effects necessitate effective treatment method. Heterogeneous electro-Fenton (hetero-EF) has been regarded as one of the most promising techniques towards organic pollutant removal. However, the preparation of efficient cathode still remains challenging. Herein, a novel metal-organic framework (MOF)-derived Fe/Ni@C marigold-like nanosheets were fabricated successfully for the degradation of oxytetracycline (OTC) by serving as the hetero-EF cathode. The FeNi3@C (Fe/Ni molar ratio of 1:3) based hetero-EF system exhibited 8.2 times faster OTC removal rate than that of anodic oxidation and possessed many advantages such as excellent OTC degradation efficiency (95.4% within 90 min), broad environmental adaptability (satisfactory treatment performance for multiple antibiotics under various actual water matrixes), good stability and reusability, and significant toxicity reduction. The superior hetero-EF catalytic performance was mainly attributed to: 1) porous carbon and Ni existence were both conducive to the in-situ generation of H2O2 from dissolved O2; 2) the synergistic effects of bimetals together with electron transfer from the cathode promoted the regeneration of ≡ FeII/NiII, thereby accelerating the production of reactive oxygen species; 3) the unique nanosheet structure derived from the precursor two-dimensional Fe-Ni MOFs enhanced the accessibility of active sites. This work presented a promising hetero-EF cathode for the electrocatalytic treatment of antibiotic-containing wastewaters.

Electronic structure regulation of Fe single atom coordinated nitrogen doping MoS2 catalyst enhances the Fenton-like reaction efficient for organic pollutant control

An efficient cathode for a Fenton-like reaction based on hydrogen peroxide (H2O2) has significant implications for the potential application of the advanced oxidation process. However, the low H2O2 selectivity and efficient activation remain challenging in wastewater treatment. In the present study, a single Fe atom doped, nitrogen-coordinated molybdenum disulfide (Fe1/N/MoS2) cathode that exhibited asymmetric wettability and self-absorption molecular oxygen was successfully prepared for pollutant degradation. The X-ray absorption near-edge structure and extended X-ray absorption fine structure of Fe1N3 in the Fe1/N/MoS2 catalyst were determined. The electronic structure demonstrated favorable H2O2 selectivity (75%) in a neutral solution and the cumulative hydroxyl radical concentration was 14 times higher than the pure carbon felt. After 10 consecutive reaction experiments, the removal ratio of paracetamol still reached 97%, and the catalytic performance did not decrease significantly. This work deeply understands the catalytic mechanism of Fenton-like reaction between single Fe atom and MoS2 double reaction sites, and proves that the regulation of the electronic structure of Fe single atom is an effective strategy to improve the activity of Fenton-like reaction.

Local O2 concentrating boosts the electro-Fenton process for energy-efficient water remediation

The electro-Fenton process is a state-of-the-art water treatment technology used to remove organic contaminants. However, the low O2 utilization efficiency (OUE, <1%) and high energy consumption remain the biggest obstacles to practical application. Here, we propose a local O2 concentrating (LOC) approach to increase the OUE by over 11-fold compared to the conventional simple O2 diffusion route. Due to the well-designed molecular structure, the LOC approach enables direct extraction of O2 from the bulk solution to the reaction interface; this eliminates the need to pump O2/air to overcome the sluggish O2 mass transfer and results in high Faradaic efficiencies (~50%) even under natural air diffusion conditions. Long-term operation of a flow-through pilot device indicated that the LOC approach saved more than 65% of the electric energy normally consumed in treating actual industrial wastewater, demonstrating the great potential of this system-level design to boost the electro-Fenton process for energy-efficient water remediation.

Highly efficient heterogeneous electro-Fenton reaction for tetracycline degradation by Fe-Ni LDH@ZIF-67 modified carbon cloth cathode: Mechanism and toxicity assessment

In this work, a novel and efficient Fe-Ni LDH@ZIF-67 catalyst modified carbon cloth (CC) cathode was developed for tetracycline (TC) degradation in heterogeneous electro-Fenton (Hetero-EF) process. Compared to Fe-Ni LDH/CC (75.7%), TC degradation rate of Fe-Ni LDH@ZIF-67/CC cathode increased to 95.6% within 60 min. The synergistic effect of hetero-EF and anodic oxidation process accelerated electron transfer, the maximum H2O2 production of Fe-Ni LDH@ZIF-67/CC electrode reached 264 mg/L, improving utilization efficiency of H2O2. The cathode possessing a satisfied TC degradation performance over a wide pH (3-9). Free radical capture experiment revealed the collaboration of ·O2-, ·OH, and 1O2 play a significant role in TC degradation. The 5 cycles experiment and metal ion leaching experiment showed that the proposed Fe-Ni LDH@ZIF-67/CC has good recyclability and stability. In addition, the proposed Fe-Ni LDH@ZIF-67/CC cathode achieved satisfying performance in real water (tap water: 97.3%, lake water: 97.7%), demonstrating the possibility for practical application. TC degradation pathways were proposed by theory analysis and experimental results. The toxicity of TC intermediates was reduced by Hetero-EF degradation according to Toxicity Estimation Software Tool and Escherichia coli growth inhibition experiments. This work provides a novel modified cathode to improve removal efficiency of antibiotics in wastewater.

Fe-doped g-C3N4 with duel active sites for ultrafast degradation of organic pollutants via visible-light-driven photo-Fenton reaction: Insight into the performance, kinetics, and mechanism

The photo-Fenton process provides a sustainable and cost-effective strategy for removing refractory organic contaminants in wastewater. Herein, a high-efficient Fe-doped g-C3N4 photocatalyst (Fe@CN10) with a unique 3D porous mesh structure was prepared by one-pot thermal polymerization for ultrafast degradation of azo dyes, antibiotics, and phenolic acids in heterogeneous photo-Fenton systems under visible light irradiation. Fe@CN10 exhibited a synergy between adsorption-degradation processes due to the co-existence of Fe3C and Fe3N active sites. Specifically, Fe3C acted as an adsorption site for pollutant and H2O2 molecules, while Fe3N acted as a photocatalytic active site for the high-efficient degradation of MO. Resultingly, Fe@CN10 showed a photocatalytic degradation rate of MO up to 140.32 mg/L min-1. The dominant ROS contributed to the removal of MO in the photo-Fenton pathway was hydroxyl radical (•OH). Surprisingly, as the key reactive species, singlet oxygen (1O2) generated from superoxide radical (•O2-) also efficiently attacked MO in a photo-self-Fenton pathway. Additionally, sponge/Fe@CN10 was prepared and filled in the continuous flow reactors for nearly 100% degradation of MO over 150 h when treating artificial organic wastewater. This work provided a facile route to prepare highly-active Fe-doped photocatalysts and develop a green photocatalytic system for wastewater treatment in the future.

Electrocatalytic Deep Dehalogenation and Mineralization of Florfenicol: Synergy of Atomic Hydrogen Reduction and Hydroxyl Radical Oxidation over Bifunctional Cathode Catalyst

It is difficult to achieve deep dehalogenation or mineralization for halogenated antibiotics using traditional reduction or oxidation processes, posing the risk of microbial activity inhibition and bacterial resistance. Herein, an efficient electrocatalytic process coupling atomic hydrogen (H*) reduction with hydroxyl radical (•OH) oxidation on a bifunctional cathode catalyst is developed for the deep dehalogenation and mineralization of florfenicol (FLO). Atomically dispersed NiFe bimetallic catalyst on nitrogen-doped carbon as a bifunctional cathode catalyst can simultaneously generate H* and •OH through H2O/H+ reduction and O2 reduction, respectively. The H* performs nucleophilic hydro-dehalogenation, and the •OH performs electrophilic oxidization of the carbon skeleton. The experimental results and theoretical calculations indicate that reductive dehalogenation and oxidative mineralization processes can promote each other mutually, showing an effect of 1 + 1 > 2. 100% removal, 100% dechlorination, 70.8% defluorination, and 65.1% total organic carbon removal for FLO are achieved within 20 min (C0 = 20 mg·L-1, -0.5 V vs SCE, pH 7). The relative abundance of the FLO resistance gene can be significantly reduced in the subsequent biodegradation system. This study demonstrates that the synergy of reduction dehalogenation and oxidation degradation can achieve the deep removal of refractory halogenated organic contaminants.

Simultaneous Desalination and Glyphosate Degradation by a Novel Electro-Fenton Membrane Distillation Process

The industrial effluent from glyphosate production has high salinity and refractory organic contaminants. The removal of organics and the recycling of inorganic salts from this kind of water are challenging issues. In this study, electro-Fenton (EF) and membrane distillation (MD) were coupled in a single reactor utilizing a membrane-based electrode (Mem-GDE) with the ability to bidirectionally transfer vapor and oxygen and electrochemically synthesize H2O2. The operating thermal conditions for MD significantly promoted Fenton reactions and, thus, the removal of glyphosate. During operation, Fe species deposited on the Mem-GDE and enhanced its catalytic activity and adsorptive capacity, which markedly increased the apparent reaction rate constant of glyphosate by 6 times. This novel EF-MD process simultaneously removed organics and concentrated the inorganics, which is very meaningful for decreasing the costs for subsequent crystallization and achieving high-quality crystal salts. This study provides an efficient method for the treatment of organic-inorganic hybrid wastewater.

Slow-release synthesis of Cu single-atom catalysts with the optimized geometric structure and density of state distribution for Fenton-like catalysis

Single-atom Fenton-like catalysis has attracted significant attention, yet the quest for controllable synthesis of single-atom catalysts (SACs) with modulation of electron configuration is driven by the current disadvantages of poor activity, low selectivity, narrow pH range, and ambiguous structure-performance relationship. Herein, we devised an innovative strategy, the slow-release synthesis, to fabricate superior Cu SACs by facilitating the dynamic equilibrium between metal precursor supply and anchoring site formation. In this strategy, the dynamics of anchoring site formation, metal precursor release, and their binding reaction kinetics were regulated. Bolstered by harmoniously aligned dynamics, the selective and specific monatomic binding reactions were ensured to refine controllable SACs synthesis with well-defined structure-reactivity relationship. A copious quantity of monatomic dispersed metal became deposited on the C3N4/montmorillonite (MMT) interface and surface with accessible exposure due to the convenient mass transfer within ordered MMT. The slow-release effect facilitated the generation of targeted high-quality sites by equilibrating the supply and demand of the metal precursor and anchoring site and improved the utilization ratio of metal precursors. An excellent Fenton-like reactivity for contaminant degradation was achieved by the Cu1/C3N4/MMT with diminished toxic Cu liberation. Also, the selective ·OH-mediated reaction mechanism was elucidated. Our findings provide a strategy for regulating the intractable anchoring events and optimizing the microenvironment of the monatomic metal center to synthesize superior SACs.

Boron Bifunctional Catalysts for Rapid Degradation of Persistent Organic Pollutants in a Metal-Free Electro-Fenton Process: O2 and H2O2 Activation Process

Metals usually served as the active sites of the heterogeneous bifunctional electro-Fenton reaction, which faced the challenge of poor stability under acidic or even neutral conditions. Exploring a metal-free heterogeneous bifunctional electro-Fenton catalyst can effectively solve the above problems. In this work, a stable metal-free heterogeneous bifunctional boron-modified porous carbon catalyst (BTA-1000) was synthesized. For the BTA-1000 catalyst, the yield of H2O2 (294 mg/L) significantly increased. The degradation rate of phenol by BTA-1000 (0.242 min-1) increased by an order of magnitude, compared with the porous carbon catalyst (0.0105 min-1). The BTA catalyst could rapidly degrade industrial dye wastewater, and its specific energy consumption was 5.52 kW h kg-1 COD-1, lower than that in previous reports (6.38-7.4 kW h kg-1 COD-1). DFT and XPS revealed that C═O and -BC2O groups jointly promoted the generation of H2O2, and the -BCO2 group played dominant roles in the generation of •OH because the oxygen atom near the electron-giving groups (-BCO2 group) facilitated the formation of hydrogen bond and H2O2 adsorption. This work gained deep insights into the reaction mechanism of the boron-modified porous carbon catalyst, which helped to guide the development of metal-free heterogeneous bifunctional electro-Fenton catalysts.

Titanium Oxide Electrocatalytic Membrane Filtration: "Two Faces" of Oxygen Vacancies in Generation and Transformation of Reactive Oxygen Species

Oxygen vacancies are crucial to the production of reactive oxygen species (ROS) in the metal oxide electrocatalytic membrane (MOx EM) process. Here, using cathodic TiOx EM as a model, we thoroughly reveal the roles of oxygen vacancies in ROS generation and transformation. Oxygen vacancies significantly promote H2O2 and •OH production at low concentrations (increment <35%) but inhibit their production at high concentrations (increment >35%). Electrochemical analysis discloses that the enhancement of ROS production profits from the acceleration of charge transfer kinetics by both bulk and surface oxygen vacancies, whereas we attribute the decline in ROS production to the strong adsorption of ROS by surface oxygen vacancies. It is strongly supported by theoretical calculations that reveal the promoted adsorption of *OOH and *OH by oxygen vacancies, which intensifies the capture and scavenging of H2O2 and •OH. Moreover, the gradual increase of interaction time between ROS and oxygen vacancies (from ∼1 to ∼5 s) notably reduces the generation and transformation efficiency of ROS, further highlighting the detrimental impact of oxygen vacancies. In summary, oxygen vacancies show "two faces" toward ROS generation and transformation, acting as ROS promoters at low concentrations but inhibitors at high concentrations. A medium oxygen vacancy concentration is preferred for ROS production, thus causing impressive pollutant removal (>95% removal of bisphenol A within 1.2-1.5 s at 360-440 LMH). This study provides guidance on regulating ROS generation and transformation by manipulating the oxygen vacancy concentration to enhance the decontamination efficiency of MOx EMs.

Metal-free electro-Fenton degradation of perfluorooctanoic acid with efficient ordered mesoporous carbon catalyst

Heterogeneous electro-Fenton with in situ generated H₂O₂ and ^•OH is a cost-effective method for the degradation of refractory organic pollutants, in which the catalyst is an important factor affecting its degradation performance. Metal-free catalysts can avoid the potential risk of metal dissolution. However, it remains great challenge to develop efficient metal-free catalyst for electro-Fenton. Herein, ordered mesoporous carbon (OMC) was designed as a bifunctional catalyst for efficient H₂O₂ and ^•OH generation in electro-Fenton. The electro-Fenton system showed fast perfluorooctanoic acid (PFOA) degradation with kinetics constant of 1.26 h^-1 and high total organic carbon (TOC) removal efficiency of 84.0 % after 3 h reaction. The ^•OH was the main species responsible for PFOA degradation. Its generation was promoted by the abundant oxygen functional groups such as C-O-C and the nano-confinement effect of mesoporous channels on OMCs. This study indicated that OMC is an efficient catalyst for metal-free electro-Fenton system.

Differentiating the reaction mechanism of three-dimensionally electrocatalytic system packed with different particle electrodes: Electro-oxidation versus electro-fenton

Recently, there are still some controversial mechanisms of the 3D electrocatalytic oxidation system, which would probably confound its industrial application. From the conventional viewpoint, the Ti₄O₇ material may be the desired particle electrodes in the 3D system since its high oxygen evolution potential favors the production of ^•OH via H₂O splitting reaction at the anode side of Ti₄O₇ particle electrodes. In fact, the incorporation of Ti₄O₇ particles showed phenol degradation of 88% and COD removal of 51% within 120 min, under the optimum conditions at energy consumption of 0.668 kWh g^-1 COD, the performance of which was much lower than those in many previous literatures. In contrast, the prepared carbon black-polytetrafluoroethylene composite (CB-PTFE) particles with abundant oxygen-containing functional groups could yield considerable amounts of H₂O₂ (200 mg L^-1) in the 3D reactor and achieved a complete degradation of phenol and COD removal of 80% in the presence of Fe²⁺, accompanying a low energy consumption of only 0.080 kWh g^-1 COD. It was estimated that only 20% of Ti₄O₇ particles near the anode attained the potential over 2.73 V/SCE at 30 mA cm^-2 based on the potential test and simulation, responsible for the low yield of ^•OH via the H₂O splitting on Ti₄O₇ (1.74 × 10^-14 M), and the main role of Ti₄O₇ particle electrodes in phenol degradation was through direct oxidation. For the CB-PTFE-based 3D system, current density of 10 mA cm^-2 was sufficient for all the CB-PTFE particles to attain cathodic potential of -0.67 V/SCE, conducive to the high yield of H₂O₂ and ^•OH (9.11 × 10^-14 M) in the presence of Fe²⁺, and the ^•OH-mediated indirect oxidation was mainly responsible for the phenol degradation. Generally, this study can provide a deep insight into the 3D electrocatalytic oxidation technology and help to develop the high-efficiency and cost-efficient 3D technologies for industrial application.

Tuning Fe3O4 for sustainable cathodic heterogeneous electro-Fenton catalysis by acetylated chitosan

Peroxidase-like catalysts are safe and low-cost candidates to tackle the dilemma in constructing sustainable cathodic heterogeneous electro-Fenton (CHEF) catalysts for water purification, but the elusive structure-property relationship of enzyme-like catalysts constitutes a pressing challenge for the advancement of CHEF processes in practically relevant water and wastewater treatment. Herein, we probe the origins of catalytic efficiency in the CHEF process by artificially tailoring the peroxidase-like activity of Fe3O4 through a series of acetylated chitosan-based hydrogels, which serve as ecofriendly alternatives to traditional carbon shells. The optimized acetylated chitosan wrapping Fe3O4 hydrogel on the cathode shows an impressive activity and stability in CHEF process, overcoming the complicated and environmentally unfavored procedures in the electro-Fenton-related processes. Structural characterizations and theoretical calculations reveal that the amide group in chitosan can modulate the intrinsic redox capacity of surficial Fe sites on Fe3O4 toward CHEF catalysis via the neutral hydrogen bond. This work provides a sustainable path and molecule-level insight for the rational design of high-efficiency CHEF catalysts and beyond.

Challenges and Future Roadmaps in Heterogeneous Electro-Fenton Process for Wastewater Treatment

The efficiency of heterogeneous electro-Fenton technology on the degradation of recalcitrant organic pollutants in wastewater is glaringly obvious. This green technology can be effectively harnessed for addressing ever-increasing water-related challenges. Due to its outstanding performance, eco-friendliness, easy automation, and operability over a wide range of pH, it has garnered significant attention from different wastewater treatment research communities. This review paper briefly discusses the principal mechanism of the electro-Fenton process, the crucial properties of a highly efficient heterogeneous catalyst, the heterogeneous electro-Fenton system enabled with Fe-functionalized cathodic materials, and its essential operating parameters. Moreover, the authors comprehensively explored the major challenges that prevent the commercialization of the electro-Fenton process and propose future research pathways to countervail those disconcerting challenges. Synthesizing heterogeneous catalysts by application of advanced materials for maximizing their reusability and stability, the full realization of H2O2 activation mechanism, conduction of life-cycle assessment to explore environmental footprints and potential adverse effects of side-products, scale-up from lab-scale to industrial scale, and better reactor design, fabrication of electrodes with state-of-the-art technologies, using the electro-Fenton process for treatment of biological contaminants, application of different effective cells in the electro-Fenton process, hybridization of the electro-Fenton with other wastewater treatments technologies and full-scale analysis of economic costs are key recommendations which deserve considerable scholarly attention. Finally, it concludes that by implementing all the abovementioned gaps, the commercialization of electro-Fenton technology would be a realistic goal.

Graphical Abstract

Highly Efficient Hydroxyl Radicals Production Boosted by the Atomically Dispersed Fe and Co Sites for Heterogeneous Electro-Fenton Oxidation

The heterogeneous electro-Fenton (hetero-e-Fenton)-coupled electrocatalytic oxygen reduction reaction (ORR) is regarded as a promising strategy for ^·OH production by simultaneously driving two-electron ORR toward H₂O₂ and stepped activating the as-generated H₂O₂ to ^·OH. However, the high-efficiency electrogeneration of ^·OH remains challengeable, as it is difficult to synchronously obtain efficient catalysis of both reaction steps above on one catalytic site. In this work, we propose a dual-atomic-site catalyst (CoFe DAC) to cooperatively catalyze ^·OH electrogeneration, where the atomically dispersed Co sites are assigned to enhance O₂ reduction to H₂O₂ intermediates and Fe sites are responsible for activation of the as-generated H₂O₂ to ^·OH. The CoFe DAC delivers a higher ^·OH production rate of 2.4 mmol L^-1 min^-1 g_cat^-1 than the single-site catalyst Co-NC (0.8 mmol L^-1 min^-1 g_cat^-1) and Fe-NC (1.0 mmol L^-1 min^-1 g_cat^-1). Significantly, the CoFe DAC hetero-e-Fenton process is demonstrated to be more energy-efficient for actual coking wastewater treatment with an energy consumption of 19.0 kWh kg^-1 COD^-1 than other electrochemical technologies that reported values of 29.7∼68.0 kW h kg^-1 COD^-1. This study shows the attractive advantages of efficiency and sustainability for ^·OH electrogeneration, which should have fresh inspiration for the development of new-generation wastewater treatment technology.

Recent advances in application of heterogeneous electro-Fenton catalysts for degrading organic contaminants in water

Over the last decades, advanced oxidation processes (AOPs) have been widely used in surface and ground water pollution control. The heterogeneous electro-Fenton (EF) process has gained much attention due to its properties of high catalytic performance, no generation of iron sludge, and good recyclability of catalyst. As of October 2022, the cited papers and publications of EF are around 1.3 × 10^-5 and 3.4 × 10^-3 in web of science. Among the AOP techniques, the contaminant removal efficiencies by EF process are above 90% in most studies. Current reviews mainly focused on the mechanism of EF and few reviews comprehensively summarized heterogeneous catalysts and their applications in wastewater treatment. Thus, this review focuses on the current studies covering the period 2012-2022, and applications of heterogeneous catalysts in EF process. Two kinds of typical heterogeneous EF systems (the addition of solid catalysts and the functionalized cathode catalysts) and their applications for organic contaminants degradation in water are reviewed. In detail, solid catalysts, including iron minerals, iron oxide-based composites, and iron-free catalysts, are systematically described. Different functionalized cathode materials, containing Fe-based cathodes, carbonaceous-based cathodes, and heteroatom-doped cathodes, are also reviewed. Finally, emphasis and outlook are made on the future prospects and challenges of heterogeneous EF catalyst for wastewater treatments.

Mn doping improves in-situ H2O2 generation and activation in electro-Fenton process by Fe/Mn@CC cathode using high-temperature shock technique

Fe/Mn@carbon cloth (CC) was successfully fabricated through high-temperature shock (HTS) technique and used as cathode modification in heterogeneous electro-Fenton (hetero-EF) process for methylisothiazolinone (MIT) degradation. The nanocrystalline on Fe/Mn@CC electrode is doped with Fe and Mn oxides and coated with carbon layer, which could markedly enhance the electrocatalysis with high electro-chemical active area and low resistance. Fe/Mn@CC modified cathode can efficiently in-situ produce and activate H₂O₂, showing high electrocatalytic activity to MIT degradation. The 95.2% MIT degradation with in 100 min were achieved under the condition of 30 mA current, 0.75 L min^-1 aeration intensity and initial pH = 3. Based on the CV curves and stability test, the high degradation activity revealed the kinetically beneficial regeneration of Fe^II/Mn^II in Fe/Mn@CC and activation of H₂O₂. The electron transfer between Fe^II/III and Mn^II/III, together with the direct Fe^II/Mn^II regeneration on the cathode, could markedly promote the H₂O₂ utilization, and eventually lead to MIT degradation.

Single-atom site catalysts for environmental remediation: Recent advances

Single-atom site catalysts (SACs) can maximize the utilization of active metal species and provide an attractive way to regulate the activity and selectivity of catalytic reactions. The adjustable coordination configuration and atomic structure of SACs enable them to be an ideal candidate for revealing reaction mechanisms in various catalytic processes. The minimum use of metals and relatively tight anchoring of the metal atoms significantly reduce leaching and environmental risks. Additionally, the unique physicochemical properties of single atom sites endow SACs with superior activity in various catalytic processes for environmental remediation (ER). Generally, SACs are burgeoning and promising materials in the application of ER. However, a systematic and critical review on the mechanism and broad application of SACs-based ER is lacking. Herein, we review emerging studies applying SACs for different ERs, such as eliminating organic pollutants in water, removing volatile organic compounds, purifying automobile exhaust, and others (hydrodefluorination and disinfection). We have summarized the synthesis, characterization, reaction mechanism and structural-function relationship of SACs in ER. In addition, the perspectives and challenges of SACs for ER are also analyzed. We expect that this review can provide constructive inspiration for discoveries and applications of SACs in environmental catalysis in the future.

Electronic Control of Traditional Iron-Carbon Electrodes to Regulate the Oxygen Reduction Route to Scale Up Water Purification

Shifting four-electron (4e^-) oxygen reduction in fuel cell technology to a two-electron (2e^-) pathway with traditional iron-carbon electrodes is a critical step for hydroxyl radical (HO^•) generation. Here, we fabricated iron-carbon aerogels with desired dimensions (e.g., 40 cm × 40 cm) as working electrodes containing atomic Fe sites and Fe₃C subnanoclusters. Electron-donating Fe₃C provides electrons to FeN₄ through long-range activation for achieving the ideal electronic configuration, thereby optimizing the binding energy of the *OOH intermediate. With an iron-carbon aerogel benefiting from finely tuned electronic density, the selectivity of 2e^- oxygen reduction increased from 10 to 90%. The resultant electrode exhibited unexpectedly efficient HO^• production and fast elimination of organics. Notably, the kinetic constant k_M for sulfamethoxazole (SMX) removal is 60 times higher than that in a traditional iron-carbon electrode. A flow-through pilot device with the iron-carbon aerogel (SA-Fe_0.4NCA) was built to scale up micropolluted water decontamination. The initial total organic carbon (TOC) value of micropolluted water was 4.02 mg L^-1, and it declined and maintained at 2.14 mg L^-1, meeting the standards for drinking water quality in China. Meanwhile, the generation of emerging aromatic nitrogenous disinfection byproducts (chlorophenylacetonitriles) declined by 99.2%, satisfying the public safety of domestic water. This work provides guidance for developing electrochemical technologies to satisfy the flexible and economic demand for water purification, especially in water-scarce areas.

Cu/Fe oxide integrated on graphite felt for degradation of sulfamethoxazole in the heterogeneous electro-Fenton process under near-neutral conditions

In the heterogeneous electro-Fenton (EF) system, high-efficiency and durable materials have attracted widespread attention as cathodes for degradation of refractory organic pollutants. In this study, a stable Cu/Fe oxide modified graphite felt electrode (Cu_0.33Fe_0.67NBDC-300/GF) was fabricated via a one-step hydrothermal method and subsequent thermal treatment, which used a bimetallic metal-organic framework (MOF) with 2-aminoterephthalic acid (NH₂BDC) ligand as the precursor. The Cu_0.33Fe_0.67NBDC-300/GF electrode was used as the cathode for sulfamethoxazole (SMX) degradation in the heterogeneous EF process. The coexistence of the Fe^II/Fe^III and Cu^I/Cu^II redox couples significantly accelerates the regeneration of Fe^II and promotes the generation of active free radicals (•OH and •O₂^-). Fe^IV was detected during the process, which indicates that the high-valent iron-oxo species was produced in near-neutral pH conditions. The removal efficiency of SMX (10 mg L^-1) can reach 100.0% within 75 min over a wide pH range (4.0-9.0). After five cycles, the electrode retained a high stability and an outstanding catalytic capacity. Furthermore, the mechanisms and pathways for SMX degradation were proposed, the products and intermediates of SMX were analyzed, and the toxicity was evaluated. It was found that the toxicity decreased after degradation. This study displays a novel strategy for building an efficient and stable self-supporting electrode for treating antibiotic wastewater.

Derivatives of metal-organic frameworks for heterogeneous Fenton-like processes: From preparation to performance and mechanisms in wastewater purification - A mini review

Organic pollution is an ever-growing issue in aquatic environment, Fenton-like processes have gained widespread acceptance due to their high oxidative potential and environmental compatibility. Derivatives of metal-organic frameworks (MOFs) are emerging heterogeneous Fenton-like catalysts, which have advantages of large surface area, diversity of structures, and abundant active sites. This work focuses on the recent advances in MOFs derivatives including metal compounds and metal incorporated carbons for Fenton-like processes. First, preparation strategies, structures and compositions are introduced. And then, the removal of organic pollutant in Fenton, electro-Fenton, and photo-Fenton process catalyzed by MOFs derivative is summarized, respectively. The contents particularly devote efforts to build connections among preparation, structures, compositions, and performance. Furthermore, the mechanisms of improving performance are discussed in detail. Finally, the perspectives of MOFs derivatives toward Fenton-like applications are proposed.

Enhanced degradation of micropollutants over iron-based electro-Fenton catalyst: Cobalt as an electron modulator in mesochannels and mechanism insight

Heterogeneous electro-Fenton (hetero-EF) process is an emerging alternative for effective oxidation of recalcitrant micropollutants, but it is hampered by limited hydroxyl radical (•OH) generation and low stability on the iron-based cathodes. Herein, we demonstrate an enhanced hetero-EF performance via modulation of iron electronic structure in an ordered mesoporous carbon (OMC). By tuning the cobalt incorporation, the highly-dispersed iron-cobalt (FeCo) nanoalloys in mesochannels (Fe_0.5Co_0.5@OMC) show a 3-fold increase in •OH yield compared with Fe@OMC, achieving degradation efficiency with 92% of sulfamethazine (SMT) and 99% of rhodamine B (RhB), and the corresponding total organic carbon (TOC) removal with 66% of SMT and 85% of RhB within 2 h in neutral pH, respectively. Experimental results and density functional theory (DFT) calculations demonstrate that iron incorporated with cobalt reduces energy barrier for facile generation of H₂O₂ and •OH from O₂ through direct electron transfer, along with decreased overpotential. Meanwhile, cobalt doping promotes H₂O₂ decomposition by accelerated Fe(II)/Fe(III) cycle and Co(II)/Co(III) redox. Furthermore, spatially confined and half-embedded structure endows the nanocatalyst (8 nm) excellent durability within a wide pH value range and good stability in cycle tests. A plausible reaction mechanism and degradation pathway for SMT are proposed. Moreover, the superiority of Fe_0.5Co_0.5@OMC cathode is maintained in simulated wastewater, suggesting an enormous potential in practical wastewater treatment.

How to Build a Microplastics-Free Environment: Strategies for Microplastics Degradation and Plastics Recycling

Microplastics are an emergent yet critical issue for the environment because of high degradation resistance and bioaccumulation. Unfortunately, the current technologies to remove, recycle, or degrade microplastics are insufficient for complete elimination. In addition, the fragmentation and degradation of mismanaged plastic wastes in environment have recently been identified as a significant source of microplastics. Thus, the developments of effective microplastics removal methods, as well as, plastics recycling strategies are crucial to build a microplastics-free environment. Herein, this review comprehensively summarizes the current technologies for eliminating microplastics from the environment and highlights two key aspects to achieve this goal: 1) Catalytic degradation of microplastics into environmentally friendly organics (carbon dioxide and water); 2) catalytic recycling and upcycling plastic wastes into monomers, fuels, and valorized chemicals. The mechanisms, catalysts, feasibility, and challenges of these methods are also discussed. Novel catalytic methods such as, photocatalysis, advanced oxidation process, and biotechnology are promising and eco-friendly candidates to transform microplastics and plastic wastes into environmentally benign and valuable products. In the future, more effort is encouraged to develop eco-friendly methods for the catalytic conversion of plastics into valuable products with high efficiency, high product selectivity, and low cost under mild conditions.

Micro/macrostructure and multicomponent design of catalysts by MOF-derived strategy: Opportunities for the application of nanomaterials-based advanced oxidation processes in wastewater treatment

Advanced oxidation processes (AOPs) have demonstrated an effective wastewater treatment method. But the application of AOPs using nanomaterials as catalysts is challenged with a series of problems, including limited mass transfer, surface fouling, poor stability, and difficult recycling. Recently, metal-organic frameworks (MOFs) with high tunability and ultrahigh porosity are emerging as excellent precursors for the delicate design of the structure/composition of catalysts and many MOF-derived catalysts with distinct physicochemical characteristics have shown optimized performance in various AOPs. Herein, to elucidate the structure-composition-performance relationship, a review on the performance optimization of MOF-derived catalysts to overcome the existing problems in AOPs by micro/macrostructure and multicomponent design is given. Impressively, MOF-derived strategy for the design of catalyst materials from the aspects of microstructure, macrostructure, and multicomponent (polymetallic, heteroatom doping, M/C hybrids, etc.) is firstly presented. Moreover, important advances of MOF-derived catalysts in the application of various AOPs (Fenton, persulfate-based AOPs, photocatalysis, electrochemical processes, hybrid AOPs) are summarized. The relationship between the unique micro/macrostructure and/or multicomponent features and performance optimization in mass transfer, catalytic efficiency, stability, and recyclability is clarified. Furthermore, the challenges and future work directions for the practical application of MOF-derived catalysts in AOPs for wastewater treatment are provided.

Interfacial engineering of CuFeS2 quantum dots via platinum decoration with enhanced Cr(VI) reduction dynamics under UV-Vis-NIR radiation

Configuring reactive and stable catalytic interfaces is crucial to design efficient photocatalysts for Cr(VI) reduction. Herein, via the platinum decoration approach based on interfacial engineering, we developed an effective catalytic interface within novel semiconducting chalcopyrite quantum dots (Pt/CuFeS₂ QDs). Benefiting from the catalytic merits of the Pt modulated interfacial structure and electronic structure, Pt/CuFeS₂ QDs show a broader light absorption capability extending to near-infrared radiation (NIR) range with superior carriers separation performance and faster charge transfer efficiency, which delivers a three-folder faster photocatalytic Cr(VI) reduction efficiency comparing to the original CuFeS₂ QDs. Density functional theory (DFT) calculations unravel that Pt atoms prefer to be anchored with the surface S atoms to form a stable interfacial structure with faster electron transfer and Cr(VI) reduction dynamics. This work demonstrates that platinum decoration based on interfacial engineering is an effective strategy to simultaneously modulate the band structure and accelerate the interfacial reaction dynamics for semiconductor photocatalysts, which paves the way for designing highly efficient photocatalysts for light-driven environmental and energy engineering applications.

Enhanced Chlorinated Pollutant Degradation by the Synergistic Effect between Dechlorination and Hydroxyl Radical Oxidation on a Bimetallic Single-Atom Catalyst

Chlorinated organic pollutants are highly toxic and widespread in the environment, which cause ecological risk and threaten the human health. Chlorinated pollutants are difficult to degrade and mineralize by the conventional advanced oxidation process as the C-Cl bond is resistant to reactive oxygen species oxidation. Herein, we designed a bifunctional Fe/Cu bimetallic single-atom catalyst anchored on N-doped porous carbon (FeCuSA-NPC) for the electro-Fenton process, in which chlorinated pollutants are dechlorinated on single-atom Cu and subsequently oxidized by the ·OH radical produced from O₂ conversion on single-atom Fe. Benefitting from the synergistic effect between dechlorination on single-atom Cu and ·OH oxidation on single-atom Fe, the chlorinated organic pollutants can be efficiently degraded and mineralized. The mass activity for chlorinated organic pollutant degradation by FeCuSA-NPC is 545.1-1374 min^-1 g_metal^-1, excessing the highest value of the reported electrocatalyst. Moreover, FeCuSA-NPC is demonstrated to be pH-universal, long-term stable, and environment friendly. This work provides a new insight into the rational design of a bifunctional electrocatalyst for efficient removal of chlorinated organic pollutants.

Accelerating FeIII-Aqua Complex Reduction in an Efficient Solid-Liquid-Interfacial Fenton Reaction over the Mn-CNH Co-catalyst at Near-Neutral pH

The sluggish regeneration rate of Fe^II and low operating pH still restrict the wider application of classical Fenton process (Fe^II/H₂O₂) for practical water treatment. To overcome these challenges, we exploit the Mn-CNH co-catalyst to construct a solid-liquid interfacial Fenton reaction and accelerate the Fe^III/Fe^II redox cycle at the interface for sustainably generating ^•OH from H₂O₂ activation. The Mn-CNH co-catalyst exhibits an excellent regeneration rate of Fe^II (∼65%) and a high tetracycline removal rate (K_obs) of 0.0541 min^-1, which is 19.0 times higher than that of the Fe^II/H₂O₂ system (0.0027 min^-1) at a near-neutral pH (pH ≈ 5.8), and it also attains 100% degradation of sulfamethoxazole, rhodamine B, and methyl orange. The cyclic mechanism of Fe^III/Fe^II is further elucidated in an atomic scale by combining characterizations and density functional theory calculations, including Fe_aq^III specific adsorption and the electron-transfer process. Mn active sites can accumulate electrons from the matrix and adsorb Fe_aq^III to form Mn-Fe bonds at the solid-liquid interface, which accelerate electron transfer from Mn-CNH to Fe_aq^III and promote the regeneration of Fe^II at a wide pH range with a lower energy barrier. The regeneration rate of Fe^II in the Mn-CNH/Fe^II/H₂O₂ system outperforms the benchmark Fenton system and other typical metal nanomaterials, which has great potential to be widely applied in actual environment remediation.

Boosting the activation of molecular oxygen and the degradation of tetracycline over high loading Ag single atomic catalyst

Photocatalytic activation of molecular oxygen (O₂) is a promising way in oxidative degradation of organic pollutants. However, it suffers from low efficiency mainly due to the limited active sites for O₂ activation over traditional photocatalysts. Therefore, we established a single atomic Ag-g-C₃N₄ (SAACN) catalyst with 10 wt% loading of Ag single sites for boosting the O₂ activation during the degradation of tetracycline (TC), and 10 wt% loading of nanoparticle Ag-g-C₃N₄ (NPACN) was studied as a comparison. When using SAACN, the accumulative concentration of superoxide (•O₂^-), hydroxyl radical (•OH), singlet oxygen (¹O₂) reached up to 0.66, 0.19, 0.33 mmol L^-1h^-1, respectively, within 120 min, 11.7, 5.7 and 4.9 times compared with those using NPACN, representing 17.24% of dissolved O₂ was converted to reactive oxygen species (ROS). When additionally feeding air or O_2, the accumulative concentrations of •O₂^-, •OH, ¹O₂ were even higher (air: 4.21, 0.97, 2.02 mmol L^-1 h^-1; O₂: 17.13, 1.32, 9.00 mmol L^-1 h^-1). The rate constants (k) for degrading the TC were 0.0409 min^-1 over SAACN and 0.00880 min^-1 over NPACN, respectively (mineralization rate: 95.7% vs. 59.9% after 3 h of degradation). Moreover, the degradation ability of SAACN did not decrease in a wide range of pH value (4-10) or under low temperature (10 °C). Besides the high exposure of Ag single sites, other advances of SAACN were: 1(O₂ was more energetic favorable to adsorb on single atomic Ag sites; 2) Positive Ag single sites were easier to obtain the electrons from the surrounding N atoms, and facilitated electron transfer towards adsorbed O₂.