Enhancing Interface Reactions by Introducing Microbubbles into a Plasma Treatment Process for Efficient Decomposition of PFOA

Simultaneous degradation of multiple micropollutants in flowing water by mild and strong microbubble-enhanced cold plasma activation

Elimination of stubborn organic micropollutants from water is crucial for bioaccumulation prevention and ecosystem protection. Cold plasma activation technology is a clean, sustainable, and highly effective approach to the degradation of micropollutants and pathogens in contaminated water. In this study, we focus on understanding the processes of simultaneous degradation of multiple micropollutants (8 types at maximum) in flowing water by the recently developed microbubble-enhanced cold plasma activation (MB-CPA) technology. The degradation of micropollutants with the treatment time was analyzed by using ultrahigh performance liquid chromatography coupled to a triple quadrupole mass spectrometer (UHPLC-QQQ-MS). We found that the degradation efficiencies of all compounds increase rapidly under strong activation conditions that can lead to above 98% removal of a model compound. After long treatment duration or at a fast flow rate, the removal efficiency was sufficiently high for all compounds that were either easy or hard to degrade. The large variation in degradation efficiencies was present under mild activation conditions. The electron spinning resonance measurements reveal a greater abundance of hydroxyl radicals in treated synthetic river water than pure water, highlighting the effects of water matrix on the degradation efficiency. The understanding from this work may help to design the activation process and minimize the energy consumption for the simultaneous elimination of pollutants in diverse and complex water bodies by cold plasma technology.

Mechanistic elucidation of ultraviolet light and peracetic acid coupling-driven enhancements in short-chain fatty acid production from sludge: Reactive species-induced organic solubilization and microbial function regulation

This study investigates the potential of enhancing short-chain fatty acid (SCFA) production during anaerobic fermentation of waste activated sludge through ultraviolet (UV) and peracetic acid (PAA) treatment. Under optimal conditions (UV irradiation time = 60 min and PAA dosage = 0.03 g/g VSS (volatile suspended solids), UV/PAA pretreatment enhanced sludge solubility, improved the biodegradability of organic matter, and facilitated pollutant degradation. During anaerobic fermentation, UV/PAA treatment resulted in an 836 % increase in SCFA production and a 50 % higher acetic acid ratio compared to the control group. Mechanistic studies revealed that UV/PAA treatment promoted sludge decomposition and enhanced the biodegradability of dissolved organic matter by generating more reactive species (•OH, CH3C(O)O•, •O2-, and 1O2), thereby facilitating sludge hydrolysis and acidification. Additionally, UV/PAA treatment increased the abundance of hydrolytic and SCFA-producing bacteria while reducing the abundance of SCFA-consuming bacteria. Moreover, UV/PAA treatment stimulated the expression of key enzyme genes involved in organic matter hydrolysis and SCFA production, thereby promoting SCFA accumulation. Therefore, UV/PAA treatment is promising in sludge treatment and provides a new approach for resource recovery from sludge.

Response surface optimisation for corona discharge treatment of nicosulfuron in water

Sulfonylurea herbicides are the most widely used herbicides in the world, which are widely used in the prevention and control of weeds in rice, wheat, soybean and other fields. Long-term application will cause environmental pollution, and the use of plasma technology to degrade herbicides in water is expected to be an effective method to restore pollution. In this experiment, corona discharge plasma was used to treat nicosulfuron in water, and the response surface method was used to optimise the operating conditions of the single system of corona discharge treatment of nicosulfuron and the synergistic system of corona discharge treatment of nicosulfuron with the addition of persulfate. The results showed that the degradation rate of nicosulfuron was 75.08% after 10 min under the optimum operating condition of single system. Under the optimum operating conditions, the degradation rate of nicosulfuron after 10 min was 100%. The R2 and P values of the two system models were both greater than 9.3 and less than 0.01, and the reliability of the simulated degradation rate data was verified by experiments, which provided basic data for the future research on the use of low temperature plasma to degrade herbicides.

PFAS removal via adsorption: A synergistic review on advances of experimental and computational approaches

Per- and polyfluoroalkyl substances (PFAS), commonly known as "forever chemicals", have become a major focus of current research due to their toxicity and persistence in the environment. These synthetic compounds are notoriously difficult to degrade, accumulating in water systems and posing long-term health and environmental risks. Adsorption is one of the most investigated technologies for PFAS removal. This review comprehensively reviewed the PFAS adsorption process, focusing not only on the adsorption itself, but also on the behavior of PFAS in the aquatic environment prior to adsorption because these behaviors directly affect PFAS adsorption. Significantly, this review summarized in detail the advances made in PFAS adsorption from the computational approach and emphasized the importance of integrated experimental and computational studies in gaining molecular-level understanding on the adsorption mechanisms of PFAS. Toward the end, the review identified several critical research gaps and suggested key interdisciplinary research needs for further advancing our understanding on PFAS adsorption.

Saccharomyces cerevisiae inactivation during water disinfection by underwater plasma bubbles: Preferential reactive species production and subcellular mechanisms

The escalating challenges posed by water resource contamination, especially exacerbated by health concerns associated with microbial fungi threats, necessitate advanced disinfection technologies. Within this context, non-thermal plasma generated within bubble column reactors emerges as a promising antifungal strategy. The effects of direct plasma bubbles within different discharge modes and thus-produced plasma activated water (PAW) on the inactivation of Saccharomyces cerevisiae are investigated. Results show that plasma bubbles generated by dielectric barrier discharge (DBD) mode can effectively inactivate yeast cells (∼4.44 logs reduction) within 1 min, outperforming the spark discharge (SD). In this case, SD can cause a significant portion of cell necrosis, possibly due to the high electric field at the bubble interface. In PAW, DBD and SD produce different dominant long-lived oxygen and nitrogen species, while the crucial short-lived species in yeast apoptosis are both attributed to the singlet oxygen (1O2) as confirmed by scavenger tests. The detection of intracellular reactive oxygen species and antioxidant enzymes further illustrates the role of PAW in triggering apoptosis. Overall, this study demonstrates the discharge mode-dependent modulation of reactive species chemistry in plasma-liquid interactions and provides new insights into the subcellular mechanism of plasma-enabled yeast inactivation for water resource decontamination.

Electrochemical destruction of PFAS at low oxidation potential enabled by CeO2 electrodes utilizing adsorption and activation strategies

The persistence and ecological impact of per- and poly-fluoroalkyl substances (PFAS) in water sources necessitate effective and energy-efficient treatment solutions. This study introduces a novel approach using cerium dioxide (CeO2) electrodes enhanced with oxygen vacancy (Ov) to catalyze the defluorination of PFAS. By leveraging the unique affinity between cerium and fluorine-containing species, our approach enables adsorptive preconcentration and catalytic degradation at low oxidation potentials (1.37 V vs. SHE). Demonstrating high removal and defluorination efficiencies of perfluorooctanoic acid (PFOA) at 94.0 % and 73.0 %, respectively, our approach also proves effective in the environmental matrix. It minimizes the impacts of co-existing natural organic matter and chloride ions, crucial benefits of operating at lower oxidation potentials. The role of Ov in CeO2 is validated by both experimental results and density functional theory modeling, demonstrating that these sites can activate the C-F bond and substantially reduce the energy barriers for defluorination. Consequently, our CeO2-based method not only achieves defluorination efficiencies comparable to more energy-intensive techniques but does so while requiring less than 0.62 kWh/m3 per order. This positions our approach as a promising, cost-effective alternative for the remediation of PFAS-contaminated waters, emphasizing its relevance and effectiveness in environmental remediation scenarios.

Efficient degradation of ciprofloxacin in water using nZVI/g-C3N4 enhanced dielectric barrier discharge plasma process

Residual antibiotics in aquatic environments pose health and ecological risks due to their persistence and resistance to biodegradation. Thus, it is crucial to develop efficient technologies for the degradation of such antibiotics. This study presents a novel approach using a nano zero-valent iron/graphitic carbon nitride (nZVI/g-C3N4)-enhanced dielectric barrier discharge (DBD) plasma process for the degradation of ciprofloxacin (CIP). The combination of nZVI and g-C3N4 with DBD plasma significantly enhances CIP degradation efficiency, achieving an apparent first-order kinetic constant of 0.2849 min⁻1 at an input voltage of 12 kV, which is 5.22 times higher than standalone DBD treatment and 10.59 times higher than the ozonation treatment. The morphology, elemental valence states, and other properties of nZVI/g-C3N4 have been thoroughly characterized and demonstrate good reusability. Reactive species such as ·OH dominates CIP degradation. The Fe atoms in nZVI/g-C3N4 exhibit a strong tendency to donate electrons, generating reactive oxygen through the dissociation of adsorbed water. The cleavage of C-F bonds, hydroxylation and ring-opening oxidation of the piperazine group are the main pathways for CIP degradation, which helps to reduce biotoxicity after treatment. Overall, this study provides insights into the mechanism of reactive species in a DBD-nZVI/g-C3N4 system, a system that has the potential to become an efficient and environmentally friendly solution for the treatment of antibiotic wastewater.

Methane Bubbled Through Seawater Can be Converted to Methanol With High Efficiency

Partial oxidation of methane (POM) is achieved by forming air-methane microbubbles in saltwater to which an alternating electric field is applied using a copper oxide foam electrode. The solubility of methane is increased by putting it in contact with water containing dissolved KCl or NaCl (3%). Being fully dispersed as microbubbles (20-40 µm in diameter), methane reacts more fully with hydroxyl radicals (OH·) at the gas-water interface. The alternating voltage (100 mV) generates two synergistic POM processes dominated by Cl- → Cl· + e- and O2 + e- → O2 -• under positive and negative potentials, respectively. By tuning the frequency and amplitude, the extent and path of the POM process can be precisely controlled so that more than 90% methanol is selectively formed compared to the two byproducts, dichloromethane, and acetic acid. The methane to methanol conversion yield is estimated to be 57% at a rate of approximately 887 µM h-1. This method appears to have potential for removing methane from air using seawater or for converting higher-concentration methane sources into value-added methanol.

Enhanced removal of perfluorooctanoic acid by aluminum-based metal-organic frameworks prepared by bauxite residue

Upcycling solid waste into advanced adsorbents is a sustainable approach in the field of waste valorization and wastewater treatment. In this study, we developed a phase-controlled synthesis method for a single phase of an aluminum-based metal-organic framework (MOF) using an aluminum source (Al3+) in red mud (RM), and demonstrated its potential for aqueous perfluorooctanoic acid (PFOA) removal. By optimizing the pre-treatment process, the selective extraction of aluminum ion from RM was achieved. Subsequently, three distinct aluminum-based MOFs (i.e., MIL-53(Al), MIL-96(Al), and MIL-100(Al)) were synthesized by controlling the hydrothermal synthesis conditions and using specific organic linkers (terephthalic acid and trimesic acid). For MOFs based on trimesic acid, the initial Al3+: trimesic acid ratio and duration of hydrothermal synthesis exerted an observable influence on the formation of the second building unit of the MOF. By manipulating these factors, we could precisely control isolated MIL-96(Al) and MIL-100(Al). The PFOA adsorption results revealed a remarkable increase in the adsorption capacity (Qmax: 131.58 mg/g) on MIL-100(Al) compared with that on MIL-96(Al). This was due to its large surface area (1189.15 m2/g) and the presence of numerous hydrophilic sites favorable for interaction with the carboxylic group of PFOA. Furthermore, a computational investigation revealed that in addition to direct Lewis acid-base interaction between PFOA and aluminum sites, the major mechanism involved the formation of a complex induced by ion exchange between coordinated NO3- and PFOA anions.

Promoting SO4·- and ·OH Generation from Sulfate Solution toward Efficient Electrochemical Oxidation of Organic Contaminants at a B/N-Doped Diamond Flow-Through Electrode

Electrochemical oxidation via in situ-generated reactive oxygen species (ROS) is effective for the mineralization of refractory organic pollutants. However, the oxidation performance is usually limited by the low yield and utilization efficiency of ROS. Herein, a B/N-doped diamond (BND) flow-through electrode with enhanced SO4·-/·OH generation and utilization was designed for electrochemical oxidation of organic pollutants in sulfate solution. Both its SO4·-/·OH yields and SO4·- selectivity were improved by regulating B/N doping, and the production and utilization of SO4·-/·OH were facilitated by flow-through mode. BND showed fast PFOA oxidation with kinetic constants of 2.56-4.58 h-1 at low current densities of 2.0-5.0 mA cm-2. Its energy consumption for PFOA oxidation was 2.15-6.46 kWh m-3, which was lower than those of state-of-the-art electrodes under similar conditions. The BND anode was also efficient for treating organic fluorine wastewater and coking wastewater. The superior performance was contributed by its enhanced SO4·-/·OH yields and utilization, as well as high SO4·- selectivity.

Toward Green Liquid Nitrogen Fertilizer Synthesis: Plasma-Driven Nitrogen Oxidation and Partial Electrocatalytic Reduction

Liquid fertilizers, particularly when integrated with precision irrigation systems, offer a more efficient and sustainable alternative to traditional solid nitrogen fertilizers. The industrial production of ammonium nitrate (NH4NO3) is environmentally detrimental due to its reliance on fossil fuels. This study introduces an innovative air-to-NOx-to-NH4NO3 pathway for synthesizing liquid nitrogen fertilizer. The process employs an underwater multi-bubble plasma reactor powered by nanosecond pulse to generate aqueous NOx, which is then partially reduced to NH4NO3 through electrocatalysis. Results show that the highest NOx production rate, 786.5 mol h-1, is achieved when the N2/O2 ratio closely resemble that of air, and short pulse rise/fall times significantly increase NOx yield. Further plasma diagnostic and global plasma chemistry modeling indicate that short rise/fall times facilitate simultaneous dielectric barrier discharge and spark discharge, synergistically enhancing nitrogen fixation efficiency. The partially electro-reduced liquid NH4NO3 fertilizer significantly improves plant growth, with stem length and leaf length increasing by 91.26% and 54.72%, respectively. Cost estimation reveals that 44.22% of the production cost is attributed to electricity consumption, underscoring the potential for optimization with renewable energy integration. Overall, the study provides new insight for the sustainable production and in-place utilization of liquid nitrogen fertilizers which may advance sustainable agriculture.

Development of pilot-scale plasma bubble reactors for efficient antibiotics removal in wastewater

Plasma bubble (PB) is a promising technology to control antibiotic wastewater pollution. However, the practical implementation of PB technology at the industrial-scale is still underdeveloped. In addition, the influence of different discharge modes for PB on wastewater treatment is largely unknown. This study designed pilot-scale PB reactors with different discharge modes to investigate the degradation effect of norfloxacin (NOR) and tetracycline (TC) in bulk tap water. Results indicate that the dielectric barrier discharge (DBD) mode with low average discharge power demonstrates superior degradation ability and higher production of O3(g) and .O2-(aq) compared to the spark mode which exhibits the high-intensity spark discharge in the tip area of the tube. After 40 min of treatment in a Double DBD reactor, 97.4% and 100% of NOR and TC are removed from 2 L tap water, attributed to the accumulation of antibiotic molecules by PBs and the in-situ generation of O3(g) and .O2-(aq) produced by plasma. Furthermore, a larger-scale PB reactor is developed by creating an array of four DBD reactors, effectively degrading 8 L mixed antibiotics solution. This study provides valuable insights for PB reactor design and the degradation performance of antibiotic wastewater, which will contribute to the further development of synergistic systems for plasma degradation.

Aerobic or anaerobic? Microbial degradation of per- and polyfluoroalkyl substances: A review

The widespread utilization of per- and polyfluoroalkyl substances (PFASs) as "forever chemicals" is posing significant environmental risks and adverse effects on human health. Microbial degradation (e.g., bacteria and fungi) has been identified as a cost-effective and environmentally friendly method for PFAS degradation. However, its degradation efficiency, biotransformation pathway, and microbial mechanism vary significantly under aerobic and anaerobic conditions. This review provides a comprehensive overview of the similarities and differences in PFAS microbial degradation by bacteria and fungi under different oxygen conditions. Initially, the efficiencies and metabolites of PFAS microbial degradation were compared under aerobic and anaerobic conditions, including perfluorinated and polyfluorinated compounds. Additionally, the microbial mechanisms of PFAS microbial degradation were obtained by summarizing key degrading microbes and enzymes. Finally, the comparisons between aerobic and anaerobic conditions in PFAS microbial degradation were provided, addressing the main challenges and proposing future research directions focused on seeking combined biodegradation techniques, exploring novel microbial species capable of degrading PFAS, and confirming complete biodegradation pathways. The understanding of PFAS microbial degradation in aerobic and anaerobic environments is crucial for providing potential solutions and future research efforts in dealing with these "forever chemicals".

Enrichment and catalysis effect of 2D/2D g-C3N4/Ti3C2 for promoting organic matter degradation and heavy metal reduction in plasma systems: Unveiling the promotion and redox mechanism

This work proposes a novel plasma-assisted 2D/2D g-C3N4/Ti3C2 system for treatment of organics-heavy metals composite wastewater. Unlike traditional materials in plasma system, 2D/2D g-C3N4/Ti3C2 not only improved the mass transfer efficiency of plasma by gathering both reactive species and pollutants onto the surface, but also induced photocatalytic reactions. Besides, the higher specific surface area and faster carrier separation rate can enhance the oxidation and reduction activity, and then promoted organic matter degradation and heavy metal reduction. Remarkably, the removal efficiency of sulfamethoxazole (SMX) and Cr(VI) increased by 16.5 % and 73.1 % respectively when introducing 2D/2D g-C3N4/Ti3C2. Roles of·OH,·H,·O2-, 1O2, e-, and h+ in SMX oxidation and Cr(VI) reduction are clarified. The primary aggregated·OH and 1O2 dominate the degradation of SMX. The influencing factors, synergistic mechanism between plasma and catalyst, and redox mechanism were clarified. This work provides a breakthrough idea for treatment of organics-heavy metals composite wastewater.

Enhanced selective photocatalytic reduction and oxidation of perfluorooctanoic acid on Bi/Bi5O7I decorated with poly (triazine imide)

Perfluorooctanoic acid (PFOA) is detected widely in surface and groundwater globally. Its removal poses a significant challenge due to its high chemical stability. This study demonstrates efficient PFOA degradation using poly-triazine-imides-tailored defective Bi5O7I (PTI/BB). Under 300 W Xe irradiation, 1 µg·L-1 PFOA could be degraded to 9.86 ng·L-1 after 3 h in the presence of 0.5 g·L-1 25 % PTI/BB. The mechanism investigation reveals that the oxygen vacancy (OV) in partially reduced Bi/Bi5O7I (BB) generates impurity states, enhancing the light-harvesting capacity. Furthermore, forming a type Ⅱ heterojunction between conjugated PTI and BB facilitates the efficient separation of photogenerated carriers. The resulting photogenerated electrons (reduction) and holes (oxidation) drive hydrogenation reduction and oxidative decarboxylation of PFOA, respectively. This synergistic effect consequently achieves significant defluorination of PFOA. The proposed PFOA degradation pathway via the PTI/BB catalyst offers new insights into the catalyst design for photocatalytic degradation of per- and polyfluoroalkyl substances (PFAS).

Bioelectricity drives transformation of nitrogen and perfluorooctanoic acid in constructed wetlands: Performances and mechanisms

In this study, constructed wetland-microbial fuel cell (CW-MFC) filled with modified basalt fiber (MBF) via iron modification was utilized for treating perfluorooctanoic acid (PFOA) containing sewage. Results showed the significant promotion by bioelectricity on ammonium and total nitrogen by 7.80-8.14 %. Although such enhancement was suppressed by PFOA, higher removal was still observed with closed circuit, and PFOA removal also increased by 9.05 %. Bioelectricity contributed to enrichment of bacteria involved in nitrifying (Nitrospira and Ellin6067), denitrifying (like Thauera and Dechloromonas), iron redox (Geobacter), and sulfate-reducing (Desulfobacter), aligned with up-regulated of functional genes, including amoA, narG , napA, narK, narS, nrfA, sulp and sqr. Enrichment of autohydrogenotrophic and sulfide-oxidizing autotrophic denitrifiers, and nitrate dependent iron oxidation bacteria by bioelectricity all promoted denitrification. Moreover, bioelectricity boosted relative abundance of organic compounds degradation enzymes, such as dehydrogenase, decarboxylase, and dehalogenase, supporting the enhancement on PFOA removal. Generally, PFOA was converted to short-chain perfluorocarboxylic acids (PFCAs) via decarboxylation, hydroxylation, HF elimination, hydrolysis, F- elimination, C-C bond scission, and dehydration in CW-MFC. The final PFCAs-products determined was perfluorobutyric acid. This work estimated feasibility of treating PFOA containing sewage by CM-MFC, and offered new insights on enhancing mechanisms of nitrogen and PFOA conversion.

Degradation of sulfamethoxazole in a falling film dielectric barrier discharge system: Performance, mechanism and toxicity evaluation

The ubiquitous presence of sulfonamides (SAs) in wastewater poses serious risks to human health and ecosystem safety. This study evaluated the performance of a falling film dielectric barrier discharge (DBD) system on the removal of five SAs, namely sulfamethoxazole (SMX), sulfisoxazole (SIZ), sulfathiazole (STZ), sulfadiazine (SDZ) and sulfamerazine (SMR). Removal efficiencies >99 % were observed for all target SAs within 30 min of treatment, with pseudo-first order rate constants varying between 0.17 and 0.27 min-1. Superior removal efficiencies were achieved under acidic conditions compared to neutral and alkaline conditions. Using SMX as a model compound, mechanistic investigations revealed that the synergy of reactive oxygen species (ROS) and reactive nitrogen species (RNS) led to its efficient degradation, with peroxynitrites (ONOO-/ONOOH) and hydroxyl radical (OH) playing pivotal roles. SMX degradation pathways encompassing nitration/nitrosation, hydroxylation, deamination, CS and SN bond cleavage were proposed. The toxicity evaluation results demonstrated that the solution toxicity diminished following the plasma treatment under specific conditions. In particular, the solution treated with air or oxygen discharge enhanced the growth of wheat seedlings, suggesting the potential for reusing plasma-treated wastewater in agriculture. This study enhances our understanding of the underlying mechanisms involved in the plasma degradation of SAs and reveals the significant potential of plasma technology as a sustainable approach for treating wastewater.

Improved ultrafiltration performance through dielectric barrier discharge/sulfite pretreatment: Effects of water matrices and mechanistic insights

The feasibility of utilizing a dielectric barrier discharge (DBD)/sulfite-ultrafiltration system was investigated in various real water bodies, aiming to clarify the mechanism behind alleviating membrane fouling while synchronously degrading perfluorooctanoic acid (PFOA) during the treatment process of Yangtze River water. The results demonstrated that the DBD/sulfite pretreatment exhibited remarkable rates of membrane flux mitigation (>84.10 %) and efficient degradation rates of PFOA (>85.13 %), which decreased with increasing pH from 3.0 to 11.0. The presence of anions, cations, and natural organic matter slightly hindered the membrane fouling mitigation and PFOA degradation by quenching free radicals; however, the addition of SO42- had a negligible impact. The mitigation of membrane fouling was attributed to the significant involvement of various radicals, including hydroxyl radical (•OH), sulfate radical (SO4•-), electron (e-/eaq-), su-peroxide anion radicals (•O2-), and other radicals such as SO3•-, exhibiting respective contributions of 33.25 %, 28.49 %, 20.56 %, 11.32 %, and 6.39 % in a synergistic redox effect. The pretreatment effectively reduced standard blocking and cake filtration fouling mechanisms by creating a sparse fouling layer on the membrane surface while increasing its roughness. Additionally, the main active species that played a significant role in the degradation of PFOA were identified as SO4•-, •OH, and eaq-. These species contributed approximately 43.63 %, 24.39 %, and 20.65 % respectively to the degradation process. By employing mass spectrometry and density functional theory, a proposed pathway for PFOA degradation was established, effectively reducing the toxicity associated with its degradation byproducts. This study provides innovative insights into membrane-based water treatment technologies that effectively tackle both membrane fouling mitigation and PFOA degradation.

State of the science and regulatory acceptability for PFAS residual management options: PFAS disposal or destruction options

This systematic review covers the urgent challenges posed by per- and polyfluoroalkyl substances (PFAS) in managing residuals from municipal, industrial, and waste treatment sources. It covers regulatory considerations, treatment technologies, residual management strategies, and critical conclusions and recommendations. A rigorous methodology was employed, utilizing scientific search engines and a wide array of peer-reviewed journal articles, technical reports, and regulatory guidance, to ensure the inclusion of the most relevant and up-to-date information on PFAS management of impacted residuals. The increasing public and regulatory focus underscores the persistence and environmental impact of PFAS. Emerging technologies for removing and sequestrating PFAS from environmental media are evaluated, and innovative destruction methods for addressing the residual media and the concentrated waste streams generated from such treatment processes are reviewed. Additionally, the evolving regulatory landscape in the United States is summarized and insights into the complexities of PFAS in residual management are discussed. Overall, this systematic review serves as a vital resource to inform stakeholders, guide research, and facilitate responsible PFAS management, emphasizing the pressing need for effective residual management solutions amidst evolving regulations and persistent environmental threats.

Micro and nanobubbles-assisted advanced oxidation processes for water decontamination: The importance of interface reactions

Micro and nanobubbles (MNBs), as an efficient and convenient method, have been widely used in water treatment. Composed of gas and water, MNBs avoid directly introducing potential secondary pollutants. Notably, MNBs exhibit significant advantages through interface reactions in assisting AOPs. They overcome barriers like low mass transfer coefficients and limited reactive sites, and shorten the distance between pollutants and oxidants, achieving higher pollutant removal efficiency. However, there is a lack of systematic summary and in-depth discussion on the fundamental mechanisms of MNBs-assisted AOPs. In this critical review, the characteristics of MNBs related to water treatment are outlined first. Subsequently, the recent applications, performance, and mechanisms of MNBs-assisted AOPs including ozone, plasma, photocatalytic, and Fenton oxidation are overviewed. We conclude that MNBs can improve pollutant removal mainly by enhancing the utilization of reactive oxygen species (ROS) generated by AOPs due to the effective interface reactions. Furthermore, we calculated the electrical energy per order of reaction (EE/O) parameter of different MNBs-assisted AOPs, suggesting that MNBs can reduce the total energy consumption in most of the tested cases. Finally, future research needs/opportunities are proposed. The fundamental insights in this review are anticipated to further facilitate an in-depth understanding of the mechanisms of MNBs-assisted AOPs and supply critical guidance on developing MNBs-based technologies for water treatment.

Fundamental data for modeling electron-induced processes in plasma remediation of perfluoroalkyl substances

Plasma treatment of per- and polyfluoroalkyl substances (PFAS) contaminated water is a potentially energy efficient remediation method. In this treatment, an atmospheric pressure plasma interacts with surface-resident PFAS molecules. Developing a reaction mechanism and modeling of plasma-PFAS interactions requires fundamental data for electron-molecule reactions. In this paper, we present results of electron scattering calculations, potential energy landscapes and their implications for plasma modelling of a dielectric barrier discharge in PFAS contaminated gases, a first step towards modelling of plasma-water-PFAS intereactions. It is found that the plasma degradation of PFAS is dominated by dissociative electron attachment with the importance of other contributing processes varying depending on the molecule. All molecules posses a large number of shape resonances - transient negative ion states - from near-threshold up to ionization threshold. These states lie in the region of the most probable electron energies in the plasma (4-5 eV) and consequently are expected to further enhance the fragmentation dynamics in both dissociative attachment and dissociative excitation.

Efficient degradation of F-53B as PFOS alternative in water by plasma discharge: Feasibility and mechanism insights

The frequent detection of 6:2 chlorinated polyfluorinated ether sulfonate (F-53B) in various environments has raised concerns owing to its comparable or even higher environmental persistence and toxicity than perfluorooctane sulfonate (PFOS). This study investigated the plasma degradation of F-53B for the first time using a water film plasma discharge system. The results revealed that F-53B demonstrated a higher rate constant but similar defluorination compared to PFOS, which could be ascribed to the introduction of the chlorine atom. Successful elimination (94.8-100 %) was attained at F-53B initial concentrations between 0.5 and 10 mg/L, with energy yields varying from 15.1 to 84.5 mg/kWh. The mechanistic exploration suggested that the decomposition of F-53B mainly occurred at the gas-liquid interface, where it directly reacted with reactive species generated by gas discharge. F-53B degradation pathways involving dechlorination, desulfonation, carboxylation, C-O bond cleavage, and stepwise CF2 elimination were proposed based on the identified byproducts and theoretical calculations. Furthermore, the demonstrated effectiveness in removing F-53B in various coexisting ions and water matrices highlighted the robust anti-interference ability of the treatment process. These findings provide mechanistic insights into the plasma degradation of F-53B, showcasing the potential of plasma processes for eliminating PFAS alternatives in water.

Ionic liquid coupled plasma promotes acetic acid production during anaerobic fermentation of waste activated sludge: Breaking the restrictions of low bioavailable substrates and altering the metabolic activities of anaerobes

This study explored the potential application of plasma coupling ionic liquid on disintegration of waste activated sludge and enhanced production of short-chain fatty acids (SCFAs) in anaerobic fermentation. Under optimal conditions (dosage of ionic liquid [Emim]OTf = 0.1 g/g VSS (volatile suspended solids) and discharge power of dielectric barrier discharge plasma (DBD) = 75.2 W), the [Emim]OTf/DBD pretreatment increased SCFA production by 302 % and acetic acid ratio by 53 % compared to the control. Mechanistic investigations revealed that the [Emim]OTf/DBD combination motivated the generation of various reactive species (such as H2O2, O3, •OH, 1O2, ONOO-, and •O2-) and enhanced the utilization of physical energies (such as heat). The coupling effects of [Emim]OTf/DBD synergistically improved the disintegration of sludge and biodegradability of dissolved organic matter, promoting the sludge anaerobic fermentation process. Moreover, the [Emim]OTf/DBD pretreatment enriched hydrolysis and SCFAs-forming bacteria while inhibiting SCFAs-consuming bacteria. The net effect was pronounced expression of genes encoding key enzymes (such as alpha-glucosidase, endoglucanase, beta-glucosidase, l-lactate/D-lactate dehydrogenase, and butyrate kinase) involved in the SCFA-producing pathway, enhancing the production of SCFAs from sludge anaerobic fermentation. In addition, [Emim]OTf/DBD pretreatment facilitated sludge dewatering and heavy metal removal. Therefore, [Emim]OTf/DBD pretreatment is a promising approach to advancing sludge reduction, recyclability, and valuable resource recovery.

PFOA-contaminated soil remediation: a comprehensive review

Soil and groundwater contamination has been raised as a concern due to the capability of posing a risk to human health and ecology, especially in facing highly toxic and emerging pollutants. Because of the prevalent usage of perfluorooctanoic acid (PFOA), in industrial and production processes, and subsequently the extent of sites contaminated with these pollutants, cleaning up PFOA polluted sites is paramount. This research provides a review of remediation approaches that have been used, and nine remediation techniques were reviewed under physical, chemical, and biological approaches categorization. As the pollutant specifications, environmental implications, and adverse ecological effects of remediation procedures should be considered in the analysis and evaluation of remediation approaches, unlike previous research that considered a couple of PFAS pollutants and generally dealt with technical issues, in this study, the benefits, drawbacks, and possible environmental and ecological adverse effects of PFOA-contaminated site remediation also were discussed. In the end, in addition to providing sufficient and applicable understanding by comprehensively considering all aspects and field-scale challenges and obstacles, knowledge gaps have been found and discussed.

Efficient degradation of p-nitrophenol from water by enhancing dielectric barrier discharge (DBD) plasma through ozone circulation: Optimization, kinetics and mechanism

Non-thermal dielectric barrier discharge (DBD) plasma has received great attention for degradation of persistent organic pollutants such as p-nitrophenol (PNP). However, the feasibility of the DBD implementation is not clear due to its high energy consumption and relatively low degradation efficiency. In this research, a novel strategy was suggested based on re-circulation of the generated O3 in the DBD system to enhance the PNP degradation efficiency and energy yield. The potential mechanism and possible pathway of PNP degradation were studied by EPR, ESR, DFT and GS-MS analytical tests. According to the results, the PNP degradation efficiency and energy yield increased from 57.4% to 94.4% and from 0.52 to 1.18 g kW-1h-1, respectively through ozone circulation into the DBD reactor. This was due to the more release of long-lived and short-lived reactive species (ROS) in the DBD-O3 system by the O3 circulation. The variations in pH (4-10), initial concentration (50-90 mg L-1), and the presence of co-existing substances in the water matrix had minimal impact on the DBD-O3 system, in comparison to the conventional system. The biological toxicity evaluation revealed that the hybrid DBD-O3 system transform PNP to less toxic intermediates. This study proposes a promising strategy to improve the utilization of DBD for the degradation of PNP.

Microstructured gas-liquid-(solid) interfaces: A platform for sustainable synthesis of commodity chemicals

Gas-liquid-solid catalytic reactions are widespread in nature and man-made technologies. Recently, the exceptional reactivity observed on (electro)sprayed microdroplets, in comparison to bulk gas-liquid systems, has attracted the attention of researchers. In this perspective, we compile possible strategies to engineer catalytically active gas-liquid-(solid) interfaces based on membrane contactors, microdroplets, micromarbles, microbubbles, and microfoams to produce commodity chemicals such as hydrogen peroxide, ammonia, and formic acid. In particular, particle-stabilized microfoams, with superior upscaling capacity, emerge as a promising and versatile platform to conceive high-performing (catalytic) gas-liquid-(solid) nanoreactors. Gas-liquid-(solid) nanoreactors could circumvent current limitations of state-of-the-art multiphase reactors (e.g., stirred tanks, trickle beds, and bubble columns) suffering from poor gas solubility and mass transfer resistances and access gas-liquid-(solid) reactors with lower cost and carbon footprint.

Iron complex regulated synergistic effect between the current and peroxymonosulfate enhanced ultrafast oxidation of perfluorooctanoic acid via free radical dominant electrochemical reaction

Iron complex regulated electrochemical reaction was triggered for revealing the reaction mechanism, degradation pathway, and applied potential of perfluorooctanoic acid (PFOA). The increased PMS concentrations, electrode spacing, and current density significantly enhanced PFOA elimination, with current density exhibiting a relatively strong interdependency to PFOA complete mineralization. The synergy between PMS and electrochemical reactions greatly accelerated PFOA decomposition by promoting the generation of key reaction sites, such as those for PMS activation and electrochemical processes, under various conditions. Furthermore, density functional theory calculations confirmed that the reciprocal transformation of Fe2+ and Fe3+ complexes was feasible under the electrochemical effect, further promoting the generation of active sites. The developed electrochemical oxidation with PMS reaction (EO/PMS) system can rapidly decompose and mineralize PFOA while maintaining strong tolerance to changing water matrices and organic and inorganic ions. Overall, it holds promise for use in treating and purifying wastewater containing PFOA.

Application of electron beam technology to decompose per- and polyfluoroalkyl substances in water

The widespread detection of per- and polyfluoroalkyl substances (PFAS) in environmental compartments across the globe has raised several health concerns. Destructive technologies that aim to transform these recalcitrant PFAS into less toxic, more manageable products, are gaining impetus to address this problem. In this study, a 9 MeV electron beam accelerator was utilized to treat a suite of PFAS (perfluoroalkyl carboxylates: PFCAs, perfluoroalkyl sulfonates, and 6:2 fluorotelomer sulfonate: FTS) at environmentally relevant levels in water under different operating and water quality conditions. Although perfluorooctanoic acid and perfluorooctane sulfonic acid showed >90% degradation at <500 kGy dose at optimized conditions, a fluoride mass balance revealed that complete defluorination occurred only at/or near 1000 kGy. Non-target and suspect screening revealed additional degradation pathways differing from previously reported mechanisms. Treatment of PFAS mixtures in deionized water and groundwater matrices showed that FTS was preferentially degraded (∼90%), followed by partial degradation of long-chain PFAS (∼15-60%) and a simultaneous increase of short-chain PFAS (up to 20%) with increasing doses. The increase was much higher (up to 3.5X) in groundwaters compared to deionized water due to the presence of PFAS precursors as confirmed by total oxidizable precursor (TOP) assay. TOP assay of e-beam treated samples did not show any increase in PFCAs, confirming that e-beam was effective in also degrading precursors. This study provides an improved understanding of the mechanism of PFAS degradation and revealed that short-chain PFAS are more resistant to defluorination and their levels and regulation in the environment will determine the operating conditions of e-beam and other PFAS treatment technologies.

Dielectric barrier discharge plasma promotes disinfection-residual-bacteria inactivation via electric field and reactive species

Traditional disinfection processes face significant challenges such as health and ecological risks associated with disinfection-residual-bacteria due to their single mechanism of action. Development of new disinfection processes with composite mechanisms is therefore urgently needed. In this study, we employed liquid ground-electrode dielectric barrier discharge (lgDBD) to achieve synergistic sterilization through electric field electroporation and reactive species oxidation. At a voltage of 12 kV, Pseudomonas fluorescens (ultraviolet and ozone-resistant) and Bacillus subtilis (chlorine-resistant) were completely inactivated within 8 and 6 min, respectively, surpassing a 7.0-log reduction. The lgDBD process showed good disinfection performance across a wide range of pH values and different practical water samples. Staining experiments suggest that cellular membrane damage contributes to this inactivation. In addition, we used a two-dimensional parallel streamer solver with kinetics code to fashion a representative model of the basic discharge unit, and discovered the presence of a persistent electric field during the discharge process with a peak value of 2.86 × 106 V/m. Plasma discharge generates excited state species such as O(1D) and N2(C3Πu), and further forms reactive oxygen and nitrogen species at the gas-liquid interface. The physical process, which is driven by electric field-induced cell membrane electroporation, synergizes with the bactericidal effects of reactive oxygen and nitrogen species to provide effective disinfection. Adopting the lgDBD process enhances sterilization efficiency and adaptability, underscoring its potential to revolutionize physicochemical synergistic disinfection practices.

Degradation performance and mechanism of microcystins in aquaculture water using low-temperature plasma technology

The eutrophication of aquaculture water bodies seriously restricts the healthy development of the aquaculture industry. Among them, microcystins are particularly harmful. Therefore, the development of technologies for degrading microcystins is of great significance for maintaining the healthy development of the aquaculture industry. The feasibility and mechanism of removing microcystins-LR by dielectric barrier discharge (DBD) plasma were studied. DBD discharge power of 49.6 W and a treatment time of 40 min were selected as the more suitable DBD parameters, resulting in microcystin-LR removal efficiency of 90.4%. Meanwhile, the effects of initial microcystin-LR concentration, initial pH value, turbidity, anions on the degradation effect of microcystin-LR were investigated. The removal efficiency of microcystin-LR decreased with the increase of initial microcystin-LR concentration and turbidity. The degradation efficiency of microcystin-LR at pH 4.5 and 6.5 is significantly higher than that at pH 8.5 and 3.5. HCO3- can inhibit the removal efficiency of microcystin-LR. Furthermore, five intermediates products (m/z = 1029.5, 835.3, 829.3, 815.4, 642.1) were identified in this study, and the toxicity analysis of these degradation intermediates indicated that DBD treatment can reduce the toxicity of microcystin-LR. e－aq, •OH, H2O2, and O3 have been shown to play a major role in the degradation of microcystin-LR, and the contribution ranking of these active species is e－aq > •OH > H2O2 > O3. The application of DBD plasma technology in microcystin-LR removal and detoxification has certain development potential.

Removal of per- and polyfluoroalkyl substances from water by plasma treatment: Insights into structural effects and underlying mechanisms

Non-thermal plasma emerges as a promising technology for per- and polyfluoroalkyl substances (PFAS) decomposition due to its notable efficacy and environmentally friendly characteristics. In this study, we demonstrated the efficacy of a falling film dielectric barrier discharge (DBD) system for the removal of 10 PFAS, including perfluoroalkyl carboxylic acids (PFCAs), perfluoroalkyl sulfonic acids (PFSAs) and hexafluoropropylene oxide (HFPO) oligomer acids. Results showed that compounds with fluoroalkyl chain length>4 were effectively decomposed within 100 min, with long-chain PFAS demonstrating more pronounced removal performance than their short-chain analogues. The superior removal but low defluorination observed in HFPO oligomer acids could be ascribed to their ether-based structural features. The integration of experimental results with density functional theory (DFT) calculations revealed that the synergistic effects of various reactive species are pivotal to their efficient decomposition, with electrons, OH•, and NO2• playing essential roles. In contrast, the degradation of PFSAs was more dependent on electron attack than that of PFCAs and HFPO oligomer acids. Significantly, the most crucial degradation pathway for HFPO oligomer acids was the cleavage of ether CO, whether through radical or electron attack. Furthermore, the demonstrated effective removal in various water matrices showed the potential of the plasma system for removing PFAS in complex aquatic environments. This study provided mechanistic insights into PFAS degradation behavior in plasma processes, and it underscored the vital influence of molecular structures on degradability, thereby contributing to the further development and regulation of plasma-based technologies for treating PFAS in water.

Cutting-edge technologies and relevant reaction mechanism difference in treatment of long- and short-chain per- and polyfluoroalkyl substances: A review

Per- and polyfluoroalkyl substances (PFAS) are emerging contaminants. Compared with short-chain PFAS, long-chain PFAS are more hazardous. Currently, little attention has been paid to the differences in reaction mechanisms between long-chain and short-chain PFAS. This pressing concern has prompted studies about eliminating PFAS and revealing the mechanism difference. The reaction rate and reaction mechanism of each technology was focused on, including (1) adsorption, (2) ion exchange (IX), (3) membrane filtration, (4) advanced oxidation, (5) biotransformation, (6) novel functional material, and (7) other technologies (e.g. ecological remediation, hydrothermal treatment (HT), mechanochemical (MC) technology, micro/nanobubbles enhanced technology, and integrated technologies). The greatest reaction rate k of photocatalysis for long- and short-chain PFAS high up to 63.0 h-1 and 19.7 h-1, respectively. However, adsorption, membrane filtration, and novel functional material remediation were found less suitable or need higher operation demand for treating short-chain PFAS. Ecological remediation is more suitable for treating natural waterbody for its environmentally friendly and fair reaction rate. The other technologies all showed good application potential for both short- and long-chain PFAS, and it was more excellent for long-chain PFAS. The long-chain PFAS can be cleavaged into short-chain PFAS by C-chain broken, -CF2 elimination, nucleophilic substitution of F-, and HF elimination. Furthermore, the application of each type of technology was novelly designed; and suggestions for the future development of PFAS remediation technologies were proposed.

Hydrogen Nanobubbles Generated In Situ from Nanoscale Zerovalent Iron with Water to Further Enhance Selenite Sequestration

Gas nanobubbles used for water treatment and recovery give rise to great concern for their unique advantages of less byproducts, higher efficiency, and environmental friendliness. Nanoscale zerovalent iron (nZVI), which has also been widely explored in the field of environmental remediation, can generate gas hydrogen by direct reaction with water. Whether nanoscale hydrogen bubbles can be produced to enhance the pollution removal of the nZVI system is one significant concern involved. Herein, we report direct observations of in situ generation of hydrogen nanobubbles (HNBs) from nZVI in water. More importantly, the formed HNBs can enhance indeed the reduction of Se(IV) beyond the chemical reduction ascribed to Fe(0), especially in the anaerobic environment. The possible mechanism is that HNBs enhance the reducibility of the system and promote electron transport in the solution. This study demonstrates a unique function of HNBs combined with nZVI for the pollutant removal and a new approach for in situ HNB generation for potential applications in the fields of in situ remediation agriculture, biotechnology, medical treatment, health, etc.

Enhanced piezoelectric catalysis of BaTiO3 by ZVAl for mechanochemical defluorination of PFOA: Promotion of electron transfer

Mechanochemical (MC) destruction of pollutants is effective; however, the emerging electron transfer mechanism is ambiguous owing to a lack of systematic evaluation. Therefore, this study aims to evaluate the contribution of electrons to perfluorooctanoic acid (PFOA) defluorination during MC process. A synergistic effect was obtained by activating BaTiO3 to generate piezoelectrons and applying zero-valence aluminum (ZVAl) to facilitate electron transfer, with 95.66% PFOA defluorination and reaction time decreasing from 6 h to 3 h. The mechanism of piezoelectric catalysis of the BaTiO3/ZVAl system was further investigated through kinetic analyses and intersystem comparisons. The major contribution of piezo-excited electrons was revealed through probe detection and quantitative determination. A positive correlation between electron generation and PFOA defluorination was ascertained, and the calculation of the electron utilization ratio revealed an electron transfer mechanism. The detached fluorides were confirmed to be bonded directly to the additives. Furthermore, PFOA decomposition was identified as a cyclical process with constant dissociation of the CF2 groups.

Feasibility and mechanism of removing Microcystis aeruginosa and degrading microcystin-LR by dielectric barrier discharge plasma

Harmful cyanobacterial bloom is one of the serious environmental problems worldwide. Microcystis aeruginosa is a representative harmful alga in cyanobacteria bloom. It is of great significance to develop new technologies for the removal of Microcystis aeruginosa and microcystins. The feasibility and mechanism of removing microcystis aeruginosa and degrading microcystins by dielectric barrier discharge (DBD) plasma were studied. The suitable DBD parameters obtained in this study are DBD (41.5 W, 40 min) and DBD (41.5 W, 50 min), resulting in algae removal efficiency of 77.4% and 80.4%, respectively; scanning electron microscope and LIVE-DEATH analysis demonstrate that DBD treatment can disrupt cell structure and lead to cell death; analysis of elemental composition and chemical state indicated that there are traces of oxidation of organic nitrogen and organic carbon in microcystis aeruginosa; further intracellular ROS concentration and antioxidant enzyme activity analysis confirm that DBD damage microcystis aeruginosa through oxidation. Meanwhile, DBD can effectively degrade the microcystin-LR released after cell lysis, the extracellular microcystin-LR concentration in the DBD (41.5 W) group decreased by 88.7% at 60 min compared to the highest concentration at 20 min; further toxicity analysis of degradation intermediates indicated that DBD can reduce the toxicity of microcystin-LR. The contribution of active substances to the inactivation of microcystis aeruginosa is eaq- > •OH > H2O2 > O3 > 1O2 > •O2- > ONOO-, while on the degradation of microcystin-LR is eaq- > •OH > H2O2 > O3 > •O2- > 1O2 > ONOO-. The application of DBD plasma technology in microcystis aeruginosa algae removal and detoxification has certain prospects for promotion and application.

Influence of static pressure on toluene oxidation efficiency in groundwater by micro-nano bubble ozonation

Micro-nano bubble ozonation has been widely applied in the purification of drinking water due to its superior characteristics such as high mass transfer rate and long resistance time. However, its application in groundwater remediation is limited, partially due to the unclear effect of static water pressure on the oxidation efficiency. This study constructed a batch reactor to investigate the influence of static pressure on toluene oxidation by ozone micro-nano bubble water. To achieve constant pressure, weight was added above the mobile reactor roof, and the initial concentrations of toluene and dissolved ozone were 1.00 mg L-1 and 0.68 mg L-1 respectively. Experimental results demonstrated that as the static water pressure increased from 0.0 to 2.5 m, the average microbubble diameter decreased significantly from 62.3 to 36.0 μm. Simultaneously, the oxidation percentage of toluene increased from 40.3% to 58.7%, and the reaction rate between toluene and hydroxyl radical (OH·) increased from 9.3 × 109 to 1.39 × 1010 M-1 s-1, indicating that the shrinkage of micro-nano bubbles generated an abundance of OH· that quickly oxidized toluene adsorbed at the bubble interface. A greater enhancement of oxidation efficiency for nitrobenzene, as compared to p-xylene, was observed after the addition of 2.5 m water pressure, which verified the larger contribution of OH· under static pressure. Although the improvement of oxidation efficiency was reduced under acid and alkaline environments, as well as in practical groundwater matrices, the overall results still demonstrated the promising application of micro-nano bubble ozonation in groundwater remediation.

Significantly Accelerated Photochemical Perfluorooctanoic Acid Decomposition at the Air-Water Interface of Microdroplets

The efficient elimination of per- and polyfluoroalkyl substances (PFASs) from the environment remains a huge challenge and requires advanced technologies. Herein, we demonstrate that perfluorooctanoic acid (PFOA) photochemical decomposition could be significantly accelerated by simply carrying out this process in microdroplets. The almost complete removal of 100 and 500 μg/L PFOA was observed after 20 min of irradiation in microdroplets, while this was achieved after about 2 h in the corresponding bulk phase counterpart. To better compare the defluorination ratio, 10 mg/L PFOA was used typically, and the defluorination rates in microdroplets were tens of times faster than that in the bulk phase reaction system. The high performances in actual water matrices, universality, and scale-up applicability were demonstrated as well. We revealed in-depth that the great acceleration is due to the abundance of the air-water interface in microdroplets, where the reactants concentration enrichment, ultrahigh interfacial electric field, and partial solvation effects synergistically promoted photoreactions responsible for PFOA decomposition, as evidenced by simulated Raman scattering microscopy imaging, vibrational Stark effect measurement, and DFT calculation. This study provides an effective approach and highlights the important roles of air-water interface of microdroplets in PFASs treatment.

Cold Plasma for Green Advanced Reduction/Oxidation Processes (AROPs) of Organic Pollutants in Water

Cold plasma is gaining increasing attention as a novel tool to activate energy demanding chemical processes, including advanced reduction/oxidation processes (AROPs) of organic pollutants in water. The very complex milieu generated by discharges at the water/plasma interface comprises photons, strong oxidants and strong reductants which can be exploited for achieving the degradation of most any kind of pollutants. Despite the complexity of these systems, the powerful arsenal of mechanistic tools and chemical probes of physical organic chemists can be usefully applied to understand and develop plasma chemistry. Specifically, the added value of air plasma generated by in situ discharge with respect to ozonation (ex situ discharge) is demonstrated using phenol and various phenol derivatives and mechanistic evidence for the prevailing role of hydroxyl radicals in the initial attack is presented. On the reduction front, the impressive performance of cold plasma in inducing the degradation of recalcitrant perfluoroalkyl substances, which do not react with OH radicals but are attacked by electrons, is reported and discussed. The widely different reactivities of perfluorooctanoic acid (PFOA) and of perfluorobutanoic acid (PFBA) underline the crucial role played in these processes by the interface between plasma and solution and the surfactant properties of the treated pollutants.

Synergistic effects and mechanisms of plasma coupled with peracetic acid in enhancing short-chain fatty acid production from sludge: Motivation of reactive species and metabolic tuning of microbial communities

Suitable waste activated sludge (WAS) pretreatments that boost short-chain fatty acid (SCFA) production from anaerobic fermentation are essential for carbon emission reduction and sludge resource utilization. This study established an efficient WAS pretreatment process combining atmospheric pressure plasma jet (APPJ) with peracetic acid (PAA). The maximum SCFA production (6.5-fold that of the control) largely increased under the optimal conditions (PAA dosage = 25 mg/g VSS (volatile suspended solids), energy consumption = 20.9 kWh/m3). APPJ/PAA pretreatment enhanced the production of multiple reactive species (including OH, CH3C(O)O, 1O2, ONOO-, O2-, and eaq-) and strengthened the effects of H2O2, heat, and light. This synergistically solubilized WAS and released organic substrates for SCFA-producing microbes. In addition, the enrichment of SCFA-producing bacteria and the decrease in SCFA-consuming bacteria favored SCFA accumulation. The key genes encoding for the main substrate metabolism and SCFA production in the metabolic pathway of fermentation were also enhanced.

Subnanoscale spatially confined heterogeneous Fenton reaction enables mineralization of perfluorooctanoic acid

Superoxide radical (•O2-) is capable of degrading perfluorinated compounds that are persistent in nature and cannot be removed by biological or advanced oxidation treatments, but the inherent drawback is the negligible reactivity of •O2-in aqueous phases due to the hydration effect. Here, we explored an innovative way to make use of •O2- by modulating a partial hydration state through spatial confinement control. We demonstrated this idea by conducting heterogeneous Fenton reaction with layered iron oxychloride (FeOCl) catalyst, wherein •O2-radicals produced and confined within the catalyst structure (interlayer spacing of 7.92 Å) showed defluorination effect dealing with perfluorooctanoic acid (PFOA) as model compound. The defluorination combined with advanced oxidation achieved mineralization. Mechanism study revealed that the confinement frustrated the hydration shell of •O2-with coordination number reduced from 3.3 (for bulk phase) to 1.89, and thereby changed its orbital electron properties and enhanced the nucleophilic ability. We further demonstrated a compact FeOCl membrane reactor with highly efficient degradation of PFOA (kobs up to 1.2 min-1) and cost-effective mineralization (2 × 10-6 $ per mgC), operated under ultrafiltration reaction mode. Our findings highlight the great interest of developing spatial confinement technology to modulate •O2--based reactions, as well as the feasibility of combining confinement catalyst structures with heterogeneous Fenton reaction to achieve the mineralization treatment goal.

Alcohols radicals can efficiently reduce recalcitrant perfluorooctanoic acid

Alcohols are commonly used as eluents for the regeneration of per/poly-fluoroalkyl substances (PFASs) adsorbents, but their potential effects on the subsequent treatment of these eluates have not been fully explored. This work investigated the effect of alcohols on perfluorooctanoic acid (PFOA) degradation by persulfate (PS) based advanced oxidation processes. The results showed that ethanol significantly promoted PFOA degradation in thermal/PS system. Under anoxic conditions, 25.5±1.4% or 91.2±1.6% of PFOA was degraded within 48 h in the absence or presence of ethanol. Electron paramagnetic resonance (EPR) detection, free radical quenching experiments, and chemical probe studies clearly demonstrated that the sulfate radicals (SO4•-) generated from PS activation would react with ethanol to form alcohol radicals, which could efficiently degrade PFOA. The transformation pathways of PFOA were proposed based on degradation products analysis and density function theory (DFT) calculation. The reaction between SO4•- and other alcohols could also induce the formation of alcohol radicals and facilitate to the degradation of PFOA. This work represents the positive roles of alcohols in the degradation of PFASs, providing new insights into developing simple and efficient treatments for PFASs eluate or PFAS-contaminated water.

Effective degradation of lindane and its isomers by dielectric barrier discharge (DBD) plasma: Synergistic effects of various reactive species

Lindane is a broad-spectrum organochlorine insecticide which has been included in the persistent organic pollutants (POPs) list together with its two hexachlorocyclohexane (HCH) isomers. Due to its continuous use in the past decades, the environmental impacts of HCHs are still severe now. Therefore, in the present study, dielectric barrier discharge (DBD) plasma was used as an advanced oxidation process for the destruction of HCHs in water. The result indicated that in air-DBD system, over 95.4% of the initial 5 mg L-1 lindane was degraded within 60 min. Moreover, DBD plasma displayed high degradation efficiencies of other HCH isomers including α, β, and δ-HCH. Electron spin resonance spectra, scavenging experiments and theoretical calculations revealed that the synergistic effects of various reactive species were the main reason for the high efficiency of DBD plasma. For instance, both hydroxyl radicals (•OH) and electrons (e-) could initiate the degradation of HCHs, while other reactive species such as 1O2 and ONOOH played important roles in the decomposition of intermediates. Therefore, the present study not only provided an effective approach for the treatment of HCHs, but also revealed the underlying mechanism based on in-depth experimental investigation and theoretical calculation.

Construction of Core-shell Sb2 s3 @Cds Nanorod with Enhanced Heterointerface Interaction for Chromium-Containing Wastewater Treatment

How to collaboratively reduce Cr(VI) and break Cr(III) complexes is a technical challenge to solve chromium-containing wastewater (CCW) pollution. Solar photovoltaic (SPV) technology based on semiconductor materials is a potential strategy to solve this issue. Sb2 S3 is a typical semiconductor material with total visible-light harvesting capacity, but its large-sized structure highly aggravates disordered photoexciton migration, accelerating the recombination kinetics and resulting low-efficient photon utilization. Herein, the uniform mesoporous CdS shell is in situ formed on the surface of Sb2 S3 nanorods (NRs) to construct the core-shell Sb2 S3 @CdS heterojunction with high BET surface area and excellent near-infrared light harvesting capacity via a surface cationic displacement strategy, and density functional theory thermodynamically explains the breaking of SbS bonds and formation of CdS bonds according to the bond energy calculation. The SbSCd bonding interaction and van der Waals force significantly enhance the stability and synergy of Sb2 S3 /CdS heterointerface throughout the entire surface of Sb2 S3 NRs, promoting the Sb2 S3 -to-CdS electron transfer due to the formation of built-in electric field. Therefore, the optimized Sb2 S3 @CdS catalyst achieves highly enhanced simulated sunlight-driven Cr(VI) reduction (0.154 min-1 ) and decomplexation of complexed Cr(III) in weakly acidic condition, resulting effective CCW treatment under co-action of photoexcited electrons and active radicals. This study provides a high-performance heterostructured catalyst for effective CCW treatment by SPV technology.

Effect of dissolved organic matter on selective oxidation of toluene by ozone micro-nano bubble water

The oxidation capacity of ozone micro-nano bubble water (OMBW) was always higher than ozonated water due to enhanced contact by bubble interface, while the effect of coexisted dissolved organic matter (DOM) on the oxidation efficiency was still unclear. In this paper, batch experiments were carried out to investigate the selective oxidation of toluene by both OMBW and ozonated water (OW) with coexisted DOM in water. Five types of background solutions were applied in this study, including humic acid solution, fulvic acid solution and three types of diluted landfill leachates at the same content of total organic carbon. Results showed that coexisted DOM had a greater inhibition effect on toluene oxidation rate by OMBW, and the oxidation rate of toluene by OMBW and OW became close. It was mainly caused by the decreased reaction rate between toluene and hydroxyl radical (k_T-OH·) in OMBW after the introduction of DOM, which competed for the adsorption sites on micro-nano bubble interface. The fraction of ozone to oxidize toluene as well as k_T-OH· was in positive correlations with SUVA₂₅₄ and the content of humic acid-like substances, but negatively correlated with E₂/E₃, content of tryptophan-like proteins and content of fulvic acid-like substances. In addition, increasing the ozone dose was not effective in increasing the utilization rate of ozone in OMBW due to limited adsorption sites on micro-nano bubble interface. The paper was conductive to the application of ozone micro-nano bubble water in groundwater remediation with complex water matrices.

Synergistic catalysis induced by a multi-component system constructed by DBD plasma combined with α-Fe2O3/FeVO4/HCP and peroxymonosulfate for gatifloxacin removal

The dielectric barrier discharge (DBD) multi-component system containing plasma, α-Fe₂O₃/FeVO₄, and peroxymonosulfate (PMS) with high catalytic activity was successfully constructed. Thereinto, α-Fe₂O₃/FeVO₄ was loaded on the honeycomb ceramic plate (HCP) surface (α-Fe₂O₃/FeVO₄/HCP) and placed under the water surface below the discharge area. The catalytic activity was evaluated by the removal rate of gatifloxacin (GAT), and the DBD+α-Fe₂O₃/FeVO₄+PMS system exhibited the optimal catalytic activity. The enhanced catalytic activity can be attributed to the fact that the occurrence of synergistic catalysis that simultaneously includes plasma oxidation, photocatalysis, PMS oxidation, O₃ catalysis, and Fenton reaction. The effect of various initial degradation parameters including input power, PMS dosage, pH, etc. On GAT removal was investigated. DBD+α-Fe₂O₃/FeVO₄+PMS system has a significant increase in the concentration of H₂O₂ and O₃, and the role played in the multi-component system was analyzed. The identification and analysis of organic matters during GAT degradation were visualized with the help of 3D EEMs. HPLC-MS and theoretical calculations identified the major intermediates and further deduced the possible GAT degradation pathways. Additionally, the acute toxicity of the major intermediates was predicted by the QSAR model. Finally, the possible mechanisms of synergistic catalysis to enhance catalytic activity were discussed based on the characteristics of several advanced oxidation processes (AOPs) and the results of experimental and characterization. This work provides a feasible technical route and theoretical basis for wastewater treatment by plasma combined with other AOPs.

Degradation of Perfluorooctanoic Acid on Aluminum Oxide Surfaces: New Mechanisms from Ab Initio Molecular Dynamics Simulations

Perfluorooctanoic acid (PFOA) is a part of a large group of anthropogenic, persistent, and bioaccumulative contaminants known as per- and polyfluoroalkyl substances (PFAS) that can be harmful to human health. In this work, we present the first ab initio molecular dynamics (AIMD) study of temperature-dependent degradation dynamics of PFOA on (100) and (110) surfaces of γ-Al₂O₃. Our results show that PFOA degradation does not occur on the pristine (100) surface, even when carried out at high temperatures. However, introducing an oxygen vacancy on the (100) surface facilitates an ultrafast (<100 fs) defluorination of C-F bonds in PFOA. We also examined degradation dynamics on the (110) surface and found that PFOA interacts strongly with Al(III) centers on the surface of γ-Al₂O₃, resulting in a stepwise breaking of C-F, C-C, and C-COO bonds. Most importantly, at the end of the degradation process, strong Al-F bonds are formed on the mineralized γ-Al₂O₃ surface, which prevents further dissociation of fluorine into the surrounding environment. Taken together, our AIMD simulations provide critical reaction mechanisms at a quantum level of detail and highlight the importance of temperature effects, defects, and surface facets for PFOA degradation on reactive surfaces, which have not been systematically explored or analyzed.

Molecular Dynamics Simulation Prediction of the Partitioning Constants (KH, Kiw, Kia) of 82 Legacy and Emerging Organic Contaminants at the Water-Air Interface

The tendency of organic contaminants (OCs) to partition between different phases is a key set of properties that underlie their human and ecological health impacts and the success of remediation efforts. A significant challenge associated with these efforts is the need for accurate partitioning data for an ever-expanding list of OCs and breakdown products. All-atom molecular dynamics (MD) simulations have the potential to help generate these data, but existing studies have applied these techniques only to a limited variety of OCs. Here, we use established MD simulation approaches to examine the partitioning of 82 OCs, including many compounds of critical concern, at the water-air interface. Our predictions of the Henry's law constant (K_H) and interfacial adsorption coefficients (K_iw, K_ia) correlate strongly with experimental results, indicating that MD simulations can be used to predict K_H, K_iw, and K_ia values with mean absolute deviations of 1.1, 0.3, and 0.3 logarithmic units after correcting for systematic bias, respectively. A library of MD simulation input files for the examined OCs is provided to facilitate future investigations of the partitioning of these compounds in the presence of other phases.

Photo-sterilization of groundwater by tellurium and enhancement by micro/nano bubbles

In rural areas where low-temperature groundwater is used as a drinking water source, cost-effective sterilization techniques are needed to prevent groundwater consumers from the disease risks triggered by pathogenic microorganisms like Escherichia coli and fungal spores. In this study, micro/nano bubbles (MNBs) coupled with the tellurium (Te)-based catalysts were used to considerably enhance the solar disinfection (SODIS) efficiency while overcoming the intrinsic defects of SODIS, particularly in low-temperature. Sterilization tests showed that 6.5 log₁₀ cfu/mL of E. coli K-12 and 4.0 log₁₀ cfu/mL of Aspergillus niger spores were completely inactivated within 5 min while applying this novel process for disinfection of raw groundwater, even in low-temperature. The underlying mechanisms of the extraordinary sterilization efficiency were revealed through comprehensive characterization of the catalysts and the physiological changes of the microorganisms. The localized surface plasmon resonance (LSPR) effect of the Te catalysts was identified to take advantage of photothermal synergism to achieve cell death. The integration of MNBs with the facet-engineered Te catalysts improved the photothermal catalytic effect and extracellular electron transfer, which substantially strengthened disinfection efficiency. This study provides a targeted solution into microbial inactivation in groundwater and emphasizes a cost-effective groundwater sterilization process.

The fate and behavior of perfluorooctanoic acid (PFOA) in constructed wetlands: Insights into potential removal and transformation pathway

Although constructed wetland (CW) technology is widely used to eliminate emerging organic pollutants, the removal pathway of perfluoroalkyl and polyfluoroalkyl substances (PFASs) in CW system have not been fully understood yet. This study aims to deeply probe into the fate and behavior of perfluorooctanoic acid (PFOA) in CW system. Findings indicated that the removal efficiency of PFOA by CW system was 49.69-73.63 % with initial concentrations at 100-1000 μg/L. Substrate was the main "sink" of PFOA into the CWs (46.22-50.83 %), and the plant uptake (1.99-2.48 %) accounted for a small proportion. Transformation products in the effluent of CW systems included a series of short-chain perfluorinated carboxylic acids (PFCAs), hydrogen-containing perfluoroalkanes and other organic fluorides. Activated pathways of xenobiotics biodegradation suggested that enzyme-mediated biochemical reactions might be responsible for the PFOA transformation. The transformation pathway included enzymatic decarboxylation, hydroxylation, hydrolysis, dehydrogenation and dehalogenation, as well as non-enzymatic reactions. These discoveries provide new insights into the in-depth understanding environmental behavior of PFOA in ecosystem and lay the foundation for further ecological remediation.

Electrospun Nanofibrous Membranes: A Versatile Medium for Waterproof and Breathable Application

Waterproof and breathable membranes that prevent liquid water penetration, while allowing air and moisture transmission, have attracted significant attention for various applications. Electrospun nanofiber materials with adjustable pore structures, easily tunable wettability, and good pore connectivity, have shown significant potential for constructing waterproof and breathable membranes. Herein, a systematic overview of the recent progress in the design, fabrication, and application of waterproof and breathable nanofibrous membranes is provided. The various strategies for fabricating the membranes mainly including one-step electrospinning and post-treatment of nanofibers are given as a starting point for the discussion. The different design concepts and structural characteristics of each type of waterproof and breathable membrane are comprehensively analyzed. Then, some representative applications of the membranes are highlighted, involving personal protection, desalination, medical dressing, and electronics. Finally, the challenges and future perspectives associated with waterproof and breathable nanofibrous membranes are presented.