Microplastic Textile Fibers Accumulate in Sand and Are Potential Sources of Micro(nano)plastic Pollution

Microplastics removal from stormwater runoff by bioretention cells: A review

Microplastics (MPs), as a new category of environmental pollutant, have been the hotspot of eco-friendly issues nowadays. Studies based on the aging process, the migration pattern of MPs in runoff rainwater, and the use of bioretention cells to remove MPs from runoff rainwater are beginning to attract widespread attention. This review analyses the migration patterns of MPs in rainwater runoff through their sources, structure and characteristics. The mechanism of removing MPs from runoff stormwater, the purification efficiency of different fillers and their influencing factors, and the accumulation, fate, and aging of MPs in bioretention cells are described. Furthermore, the hazards of MP accumulation on the performance of bioretention cells are summarised. Future directions for removing MPs in bioretention cells are proposed: (1) research on MPs smaller than 100 µm; (2) influence of MPs aging process on bioretention cells; (3) exploration of more effective fillers to enhance their removal efficiency; (4) research on synergistic removal mechanism of MPs and other pollution.

Co-contaminant risks in water reuse and biosolids application for agriculture

Agriculture made the shift toward resource reuse years ago, incorporating materials such as treated wastewater and biosolids. Since then, research has documented the widespread presence of contaminants of emerging concern in agricultural systems. Chemicals such as pesticides, pharmaceuticals and poly- and -perfluoroalkyl substances (PFASs); particulate matter such as nanomaterials and microplastics; and biological agents such as antibiotic resistance genes (ARGs) and bacteria (ARB) are inadvertently introduced into arable soils where they can be taken up by crops and introduced to the food-web. Thus, concern about the presence of contaminants in agricultural environments has grown in recent years with evidence emerging linking agricultural exposure and accumulation in crops to ecosystem and human health effects. Our current assessment of risk is siloed by working within disciplines (i.e., chemistry and microbiology) and mostly focused on individual chemical classes. By not acknowledging the fact that contaminants are mostly introduced as a mixture, with the potential for interactions, with each other and with environmental factors, we are limiting our current approach to evaluate the real potential for ecosystem and human health effects. By uniting expertise across disciplines to integrate recent understanding regarding the risks posed by a range of chemically diverse contaminants in resources destined for reuse, this review provides a holistic perspective on the current regulatory challenges to ensure safe and sustainable reuse of wastewater and biosolids to support a sanitation-agriculture circular economy.

Microplastics in Agricultural Soils: Sources, Fate, and Interactions with Other Contaminants

Microplastics (MPs) are recognized as emerging soil contaminants. However, the potential risks of MPs to agroecosystems have not been fully revealed, especially the compound toxic effects of MPs with co-existing organic or inorganic pollutants (OPs/IPs) in agricultural fields. In this study, we quantified the contributions of different agronomic practices to the sources of MPs in soil and highlighted the important influences of long-term tillage and fertilization on the migration and aging of MPs in agricultural fields. In addition, the antagonistic and synergistic interactions between MPs and OPs/IPs in soil were explored. We emphasized that the degree of adsorption of MPs and soil particles to OPs/IPs is a key determinant of the co-toxicity of those contaminants in soil. Finally, several directions for future research are proposed, and these knowledge gaps provide an important basis for understanding the contamination process of MPs in agricultural soils.

Macroplastic surface characteristics change during wind abrasion

Mechanical abrasion is an important wind driven process which can degrade plastic litter on sandy beaches, desert environments and in agricultural settings. Wind-driven particle impacts can cause surface roughening and chemical changes and eventually complete fragmentation in high stress environments. Aeolian abrasion has been considered in the context of microplastics (< 5 mm) which can be easily mobilised by wind. However, macroplastic (> 5 mm) abrasion has primarily been confined to engineering studies using high air velocities (> 25 m s-1) and large abraders (> 6 mm) which generate greater impact forces than observed in the natural environment. Using laboratory abrasion experiments, we demonstrate that the surface microtextures and surface chemistry of three different types of plastic are substantially altered during the processes of aeolian abrasion at impact particle velocities of 0.6 m s-1. After ten days of continuous abrasion with four different erodents the macroplastic surfaces developed textures resulting from micro-cutting, denting, flaking, micro-pitting and surface flattening. The prevalence of each surface texture was dependent upon the angularity of the erodent and the type of plastic. In all cases, polymer surface chemical compositions became more complex due to embedding of shattered abrasive and the replacment of carbon with oxygen and silica.

Textile Recycling's Hidden Problem: Surface-Modified Fiber Fragments Emitted at Every Stage

Chemical recycling methods for post-consumer textile waste are effective for sustainable textile waste management. However, recycling synthetic and blended (cotton and synthetic) textiles can contribute to the release of microplastic fibers (MPFs) into the environment. This study investigated MPF release across different stages of two chemical recycling approaches, acid and alkaline hydrolysis, of polyester/cotton-blended textiles. Recycling involves various stages, including dye removal, treatment stage, and product. In the treatment stage, acid hydrolysis breaks down cotton into cellulose, leaving the polyester (PET) intact, whereas alkaline hydrolysis degrades PET, allowing cotton recovery. Across all stages, dye removal generated the highest MPF count, averaging nearly 10,055 MPFs g-1 of textile waste. Statistical analysis confirmed that the recycling approach significantly affected MPF release (p < 0.05), whereas the fabric type did not (p > 0.05). Alkaline hydrolysis reduced MPF release during the treatment stage by 87.55% compared to acid hydrolysis, indicating that recovering cotton and chemically degrading PET can significantly minimize MPF emissions during recycling. Ridge regression analysis identified the reaction conditions as key factors in MPF fragmentation, with blend ratios influencing the number of released MPFs. Surface characterization revealed treatment-induced fiber alterations, raising concerns regarding MPF emissions throughout the process. These findings highlight the textile recycling industries can be a source of MPF release into the environment, but recovering PET through degradation or dissolution can help minimize this impact of the treatment stage.

Current research status on the distribution and transport of micro(nano)plastics in hyporheic zones and groundwater

Micro(nano)plastics, as an emerging environmental pollutant, are gradually discovered in hyporheic zones and groundwater worldwide. Recent studies have focused on the origin and spatial/temporal distribution of micro(nano)plastics in regional groundwater, together with the influence of their properties and effects of environmental factors on their transport. However, the transport of micro(nano)plastics in the whole hyporheic zone-groundwater system and the behavior of co-existing substances still lack a complete theoretical interpretation. To provide systematic theoretical support for that, this review summarizes the current pollution status of micro(nano)plastics in the hyporheic zone-groundwater system, provides a comprehensive introduction of their sources and fate, and classifies the transport mechanisms into mechanical transport, physicochemical transport and biological processes assisted transport from the perspectives of mechanical stress, physicochemical reactions, and bioturbation, respectively. Ultimately, this review proposes to advance the understanding of the multi-dimensional hydrosphere transport of micro(nano)plastics centered on groundwater, the microorganisms-mediated synergistic transformation and co-transport involving the intertidal circulation. Overall, this review systematically dissects the presence and transport cycles of micro(nano)plastics within the hyporheic zone-groundwater system and proposes prospects for future studies based on the limitations of current studies.

Pore-Scale Visualized Transport and Retention of Fibrous and Fragmental Microplastics in Porous Media under Various Surfactant Conditions

For advancing current knowledge on the transport of microplastics (MPs) in the environment, this study used a real-time pore-scale visualization and quantitative system to examine the motions and mobility of fibrous and fragmental MPs under various surfactant (AEO, CTAC, and AES) and electrolyte conditions. The videos showed that fibrous MPs formed tangles through entanglement, which moved in an axial direction aligned with the flow streamline. Both fibrous and fragmental MPs showed suspended movement as well as surface movement (e.g., sliding, rolling, and saltating) in the porous media. Some deposited fibrous MPs showed flexible deformation due to shear flow. Compared to fragmental MPs, fibrous MPs showed lower mobility due to the tendency to deposit and clog the porous media. The mobility of fragmental MPs was enhanced in the presence of AEO but remained relatively unchanged with AES. In the presence of CTAC, the mobility of fragmental MPs was slightly inhibited under low ionic strength (IS) conditions but remarkably enhanced under high IS conditions. However, the mobility of fibrous MPs was largely unaffected by the surfactants. Both the numerical model and FDLVO calculations effectively described the transport and deposition of MPs in porous media.

Occurrence and emission characteristics of microplastics in agricultural surface runoff under different natural rainfall and short-term fertilizer application

Land-based microplastics (MPs) are considered the primary source of MPs in aquatic environments, with runoff being a major pathway for their transfer from soil to surface water. However, the transportation characteristics of MPs via agricultural surface runoff remain unclear. In this study, we investigated the occurrence and emission characteristics of MPs in agricultural surface runoff under various short-term fertilizer applications and natural rainfall events using laser direct infrared imaging analysis (LDIR). MPs from fertilizers and soils co-migrated with the agricultural runoff. The abundance and concentration of MPs in runoff were 145.90 ± 22.48-2043.38 ± 89.51 items·L-1 and 39.17 ± 21.94-523.04 ± 47.85 µg·L-1, respectively. Small and low-density MPs, such as polyethylene (PE), chlorinated polyethylene (CPE), and polyurethane (PU) in film/fragment form with 20-50 µm exhibited a higher mobility. No statistical differences were observed in the distribution of runoff MPs with the application of different fertilizers. There was a significant positive relationship between runoff MP abundance and rainfall intensity. The annual emission load in this study area was 116.73 g·hm-2, indicating that the transportation of MPs via agricultural surface runoff cannot be ignored. This study is conducive to understanding the migration behavior of MPs in soil-water environments in a better manner.

Agricultural film-derived microplastics elevate the potential risk of pesticides in soil ecosystem: The inhibited leaching by altering soil pore

The residue of mulch film is a crucial source of microplastics (MPs) in agricultural fields. The effects of mulch film-derived MPs on the environmental behavior of pesticides in agriculture remain unclear. In the present study, the effects of MPs of different sizes (5 mm, 1 mm, 30 µm, and 0.3 µm) at environmentally relevant concentrations on pesticide transport were evaluated, and the mechanism was explored with respect to adsorption and pore structure using fluorescence visualization, the extended Derjaguin-Landau-Verwey-Overbeek model, and microcomputed tomography. MPs were found to be retained in the soil due to size limitation, pore capture, and surface adhesion. The presence of mm-sized MPs (5 and 1 mm) at a concentration of 0.25 % inhibited the leaching behavior of atrazine, metolachlor, and tebuconazole. MPs did not significantly alter the pesticide adsorption ability of the soil. The reduced leaching originated from the impact of MPs on soil pore structure. Specifically, the porosity increased by 16.2-25.0 %, and the connectivity decreased by 34.5 %. These results demonstrate that mm-sized MPs inhibit pesticide leaching by obstructing the pores and altering the transport pathways, thereby potentially elevating environmental risks, particularly to the soil ecosystem.

Deciphering morphology patterns of environmental microfibers: Insights into source apportionment

Microfibers, a prevalent form of microplastics, undergo diverse environmental interactions resulting in varied morphological changes. These changes can offer insights into their environmental trajectories. Despite its importance, comprehensive studies on microfiber morphology are scarce. This study collected 233 microfibers from the East China Sea and South China Sea. Based on morphological features observed in microscopic images of microfibers, such as curvature, cross-sectional shapes, diameter variations, and crack shapes, we identified a general morphological pattern, classifying the environmental microfibers into three distinct morphological types. Our findings highlight noticeable differences in morphological metrics (e.g., length, diameter, and surface roughness) across three types, especially the diameter. Microfibers of Type I had an average diameter of 19.45 ± 4.93 μm, significantly smaller than Type II (263.00 ± 75.15 μm) and Type III (299.68 ± 85.62 μm). Within the three-dimensional (3D) space fully defined by these quantitative parameters, the clustering results of microfibers are also consistent with the proposed morphology pattern, with each category showing a potential correlation with specific chemical compositions. Type I microfibers correspond to synthetic cellulose, while 94.79 % of Types II and III are composed of polymers. Notably, we also validated the great applicability of the morphology categories to microfibers in diverse environmental compartments, including water and sediments in nearshore and offshore areas. This classification aids in the efficient determination of microfiber sources and the assessment of their ecological risks, marking a significant advancement in microfiber environmental studies.

Micro and nanoplastics pollution: Sources, distribution, uptake in plants, toxicological effects, and innovative remediation strategies for environmental sustainability

Microplastics and nanoplastics (MNPs), are minute particles resulting from plastic fragmentation, have raised concerns due to their widespread presence in the environment. This study investigates sources and distribution of MNPs and their impact on plants, elucidating the intricate mechanisms of toxicity. Through a comprehensive analysis, it reveals that these tiny plastic particles infiltrate plant tissues, disrupting vital physiological processes. Micro and nanoplastics impair root development, hinder water and nutrient uptake, photosynthesis, and induce oxidative stress and cyto-genotoxicity leading to stunted growth and diminished crop yields. Moreover, they interfere with plant-microbe interactions essential for nutrient cycling and soil health. The research also explores the translocation of these particles within plants, raising concerns about their potential entry into the food chain and subsequent human health risks. The study underscores the urgency of understanding MNPs toxicity on plants, emphasizing the need for innovative remediation strategies such as bioremediation by algae, fungi, bacteria, and plants and eco-friendly plastic alternatives. Addressing this issue is pivotal not only for environmental conservation but also for ensuring sustainable agriculture and global food security in the face of escalating plastic pollution.

Negligible adsorption and toxicity of microplastic fibers in disinfected secondary effluents

Wastewater treatment plants play a crucial role in controlling the transport of pollutants to the environment and often discharge persistent contaminants such as synthetic microplastic fibers (MFs) to the ecosystem. In this study, we examined the fate and toxicity of polyethylene terephthalate (PET) MFs fabricated from commercial cloth in post-disinfection secondary effluents by employing conditions that closely mimic disinfection processes applied in wastewater treatment plants. Challenging conventional assumptions, this study illustrated that oxidative treatment by chlorination and ozonation incurred no significant modification to the surface morphology of the MFs. Additionally, experimental results demonstrated that both pristine and oxidized MFs have minimal adsorption potential towards contaminants of emerging concern in both effluents and alkaline water. The limited adsorption was attributed to the inert nature of MFs and low surface area to volume ratio. Slight adsorption was observed for sotalol, sulfamethoxazole, and thiabendazole in alkaline water, where the governing adsorption interactions were suggested to be hydrogen bonding and electrostatic forces. Acute exposure experiments on human cells revealed no immediate toxicity; however, the chronic and long-term consequences of the exposure should be further investigated. Overall, despite the concern associated with MFs pollution, this work demonstrates the overall indifference of MFs in WWTP (i.e., minor effects of disinfection on MFs surface properties and limited adsorption potential toward a mix of trace organic pollutants), which does not change their acute toxicity toward living forms.

Bark and biochar in horizontal flow filters effectively remove microplastics from stormwater

Organic materials such as bark and biochar can be effective filter materials to treat stormwater. However, the efficiency of such filters in retaining microplastics (MPs) - an emerging stormwater pollutant - has not been sufficiently studied. This study investigated the removal and transport of a mixture of MPs commonly associated with stormwater. Different MP types (polyamide, polyethylene, polypropylene, and polystyrene) were mixed into the initial 2 cm material of horizontal bark and biochar filters of 25, 50, and 100 cm lengths. The MP types consisted of spherical and fragmented shapes in size ranges of 25-900 μm. The filters were subjected to a water flow of 5 mL/min for one week, and the total effluents were analyzed for MPs by μFTIR imaging. To gain a deeper insight, one 100 cm bark filter replica was split into 10 cm segments, and MPs in each segment were extracted and counted. The results showed that MPs were retained effectively, >97%, in all biochar and bark filters. However, MPs were detected in all effluents regardless of filter length. Effluent concentrations of 5-750 MP/L and 35-355 MP/L were measured in bark and biochar effluents, respectively, with >91% of the MP counts consisting of small-sized (25 μm) polyamide spherical particles. Combining all data, a decrease in average MP concentration was noticed with longer filters, likely attributed to channeling in a 25 and 50-cm filter. The analyses of MPs in the bark media revealed that most MPs were retained in the 0-10 cm segment but that some MPs were transported further, with 19% of polyamide retained in the 80-90 cm segment. Overall, this study shows promising results for bark and biochar filters to retain MPs, while highlighting the importance of systematic packing of filters to reduce MP emissions to the environment from polluted stormwater.

Degradation of microplastic in water by advanced oxidation processes

Plastic products have gained global popularity due to their lightweight, excellent ductility, high durability, and portability. However, out of the 8.3 billion tons of plastic waste generated by human activities, 80% of plastic waste is discarded due to improper disposal, and then transformed into microplastic pollution under the combined influence of environmental factors and microorganisms. In this comprehensive study, we present a thorough review of recent advancements in research on the source, distribution, and effect of microplastics. More importantly, we conducted deep research on the catalytic degradation technologies of microplastics in water, including advanced oxidation and photocatalytic technologies, and elaborated on the mechanisms of microplastics degradation in water. Besides, various strategies for mitigating microplastic pollution in aquatic ecosystems are discussed, ranging from policy interventions, the initiative for plastic recycling, the development of efficient catalytic materials, and the integration of multiple technological approaches. This review serves as a valuable resource for addressing the challenge of removing microplastic contaminants from water bodies, offering insights into effective and sustainable solutions.

Microplastic generation from field-collected plastic gauze: Unveiling the aging processes

Accumulation of plastic debris in the environment is a matter of global concern. As plastic ages, it generates microplastic (MP) particles with high mobility. Understanding how MPs are generated is crucial to controlling this emerging contaminant. In this study, we utilized high-density polyethylene (HDPE) plastic gauze, collected from urban settings, as a representative example of plastic waste. The plastic gauze was subjected to various aging conditions, including freeze-thaw cycling, mechanical abrasion, and UV irradiation. Following aging, the plastic gauze was rinsed with water, and the number of generated MPs were quantified. It was found that aged plastic gauze generated up to 334 million MP particles per m2 (> 10 µm) during rinsing, a number two orders of magnitude higher than unaged plastic. Fragmentation occurred in two dimensions for bulk MPs of all morphotypes. However, specific aging approaches (i.e., mechanical abrasion and UV irradiation) generated spheres and fibers via pseudo-3D fragmentation. Additionally, changes in molecular weight, size distribution, and surface oxidation characteristics unveiled a complex pattern (i.e., irregular changes with exposure time). This complexity underscores the intricate nature of plastic debris aging processes in the environment.

Accumulation of microplastics in predatory birds near a densely populated urban area

The pollution due to plastic and other anthropogenic particles has steadily increased over the last few decades, presenting a significant threat to the environment and organisms, including avian species. This research aimed to investigate the occurrence of anthropogenic pollutants in the digestive and respiratory systems of four birds of prey: Common Buzzard (Buteo buteo), Black Kite (Milvus migrans), Eurasian Sparrowhawk (Accipiter nisus), and Northern Goshawk (Accipiter gentilis). The results revealed widespread contamination in all species with microplastics (MPs) and cellulosic anthropogenic fibers (AFs), with an average of 7.9 MPs and 9.2 AFs per specimen. Every digestive system contained at least one MP, while 65 % of specimens exhibited MPs in their respiratory systems. This is the work reporting a high incidence of MPs in the respiratory system of birds, clearly indicating inhalation as a pathway for exposure to plastic pollution. The content of MPs and AFs varied significantly when comparing specimens collected from central Madrid with those recovered from other parts of the region, including rural environments, suburban areas, or less populated cities. This result aligns with the assumption that anthropogenic particles disperse from urban centers to surrounding areas. Additionally, the dominant particle shape consisted of small-sized fibers (> 98 %), primarily composed of polyester, polyethylene, acrylic materials, and cellulose fibers exhibiting indicators of industrial treatment. These findings emphasize the necessity for further research on the impact of plastic and other anthropogenic material contamination in avian species, calling for effective strategies to mitigate plastic pollution.

Mechanisms of increased small nanoplastic particle retention in water-saturated sand media with montmorillonite and diatomite: Particle sizes, water components, and modelling

The processes by which small nanoplastics (NPs) accumulate in soil are unclear. To clarify the different deposition processes that affect small NPs (< 30 nm) compared to larger NPs in the soil environment, due to their interaction with clays as major soil components, the transport behavior of two-sized NPs (20 and 80 nm) with two clays (diatomite (Diat) and montmorillonite (Mont)) in NaCl and CaCl2 solutions were investigated in water-saturated quartz sand columns. The experimental results showed that more 20 nm NPs could enter the lattice structure of Diat than Mont in NaCl solution. This contributed to the stronger deposition of 20 nm NPs by Diat on sand, which was associated with a lower k1d/k1 value (obtained from two-site kinetic attachment model). In contrast, 80 nm NPs had a stronger reversible retention than 20 nm NPs with Mont, even though both sizes of NPs-Mont displayed a similar transportability. In CaCl2 solution, the larger NPs-Mont hetero-aggregates formed with a stronger suppressed depth of φmax based on Derjaguin-Landau-Verwey-Overbeek theory. Thus, Mont had a stronger transport inhibition than Diat for both NPs sizes, with a lower k1d/k1. These findings could benefit in predicting the size-based deposition of NPs in a heterogenous soil environment.

Effects of naturally aged microplastics on the distribution and bioavailability of arsenic in soil aggregates and its accumulation in lettuce

Naturally aged microplastics (NAMPs) and arsenic (As) have been reported to coexist in and threaten potentially to soil-plant ecosystem. The research explored the combined toxic effects of NAMPs and As to lettuce (Lactuca sativa L.) growth, and the distribution, accumulation and bioavailability of As in soil aggregates. The As contaminated soil with low, medium and high concentrations (L-As, M-As, H-As) were treated with or without NAMPs, and a total of six treatments. The results displayed that, in comparison to separate treatments of L-As and M-As, the presence of NAMPs increased the total biomass of lettuce grown at these two As concentrations by 68.9 % and 55.4 %, respectively. Simultaneous exposure of NAMPs and L-As or M-As led to a decrease in As content in shoot (0.45-2.17 mg kg-1) and root (5.68-14.66 mg kg-1) of lettuce, indicating an antagonistic effect between them. In contrast, co-exposure to H-As and NAMPs showed synergistic toxicity, and the leaf chlorophyll and nutritional quality of lettuce were also reduced. NAMPs altered the ratio of different soil aggregate fractions and the distribution of bioavailable As within them, which influenced the absorption of As by lettuce. In conclusion, these direct observations assist us in enhancing the comprehend of the As migration and enrichment characteristics in soil-plant system under the influence of NAMPs.

Catalytic Strategies for the Upcycling of Polyolefin Plastic Waste

Chemical upgrading of waste plastics is currently one of the most important methods for addressing plastic pollution. In comparison to the current methods of incineration or landfill, chemical upgrading enables the utilization of carbon and hydrogen elements in waste plastics as resources. This process strongly relies on efficient catalysts and reaction systems. Through catalyst design, waste plastics can be converted into fuels or chemicals under the optimized reaction conditions, extending their life cycles. In this review, we systematically discuss various chemical conversion methods for polyolefin waste plastics, which account for a large proportion of waste plastics. We further explore the remaining challenges and future development trends in this field, including improving product value through product engineering and shifting research perspectives to exploring the tolerance of catalysts toward impurities in practical waste plastic waste rather than using pure plastic feedstock.

Development of Enzyme-Based Approaches for Recycling PET on an Industrial Scale

Pollution by plastics such as polyethylene (PE), polypropylene (PP), polyvinyl chloride (PVC), polyurethane (PUR), polyamide (PA), polystyrene (PS), and poly(ethylene terephthalate) (PET) is now gaining worldwide attention as a critical environmental issue, closely linked to climate change. Among them, PET is particularly prone to hydrolysis, breaking down into its constituents, ethylene glycol (EG) and terephthalate (TPA). Biorecycling or bioupcycling stands out as one of the most promising methods for addressing PET pollution. For dealing with pollution by the macrosize PET, a French company Carbios has developed a pilot-scale plant for biorecycling waste PET beverage bottles into new bottles using derivatives of thermophilic leaf compost cutinase (LCC). However, this system still provides significant challenges in its practical implementation. For the micro- or nanosize PET pollution that poses significant human health risks, including cancer, no industrial-scale approach has been established so far, despite the need to develop such technologies. In this Perspective, we explore the enhancement of the low activity and thermostability of the enzyme PETase to match that of LCC, along with the potential application of microbes and enzymes for the treatment of waste PET as microplastics. Additionally, we discuss the shortcomings of the current biorecycling protocols from a life cycle assessment perspective, covering aspects such as the diversity of PET-hydrolyzing enzymes in nature, the catalytic mechanism for crystallized PET, and more. We also provide an overview of the Ideonella sakaiensis system, highlighting its ability to operate and grow at moderate temperatures, in contrast to high-temperature processes.

Review of emerging contaminants in green stormwater infrastructure: Antibiotic resistance genes, microplastics, tire wear particles, PFAS, and temperature

Green stormwater infrastructure is a growing management approach to capturing, infiltrating, and treating runoff at the source. However, there are several emerging contaminants for which green stormwater infrastructure has not been explicitly designed to mitigate and for which removal mechanisms are not yet well defined. This is an issue, as there is a growing understanding of the impact of emerging contaminants on human and environmental health. This paper presents a review of five emerging contaminants - antibiotic resistance genes, microplastics, tire wear particles, PFAS, and temperature - and seeks to improve our understanding of how green stormwater infrastructure is impacted by and can be designed to mitigate these emerging contaminants. To do so, we present a review of the source and transport of these contaminants to green stormwater infrastructure, specific treatment mechanisms within green infrastructure, and design considerations of green stormwater infrastructure that could lead to their removal. In addition, common removal mechanisms across these contaminants and limitations of green infrastructure for contaminant mitigation are discussed. Finally, we present future research directions that can help to advance the use of green infrastructure as a first line of defense for downstream water bodies against emerging contaminants of concern.

Tracking Nano- and Microplastics Accumulation and Egestion in a Marine Copepod by Novel Fluorescent AIEgens: Kinetic Modeling of the Rhythm Behavior

Nano- and microplastics (NMPs) are now prevalent in the marine environment. This study quantified the uptake and depuration kinetics of spherical polystyrene NMPs of different particle sizes (200 nm/30 μm) and functional groups (-NH2/-COOH) in a temperate calanoid copepod Calanus sinicus (C. sinicus), which exhibited rhythmic feeding patterns in natural environments. Aggregated-induced emission (AIE) fluorescent probes were employed to track and quantify the kinetics of NMPs with excellent photostability and biocompatibility. The results showed that C. sinicus consumed all NMPs types, with preference of NMPs to small size and amino group. Increased diatom concentrations also inhibited the bioaccumulation of NMPs. Influenced by rhythmic behavior, the bioaccumulation of NMPs by C. sinicus was nonstationary during the 6 h uptake phase. After 1-3 h of rapid uptake, the body burden peaked and then slowly declined. During the 3 h depuration phase, C. sinicus rapidly and efficiently removed NMPs with a mean half-life of only 0.23 h. To further quantify the body burden of C. sinicus under the influence of rhythmic feeding behavior, a biokinetic model was established, and the Markov chain Monte Carlo method was used to estimate the parameter distribution. Our results highlighted that copepods exhibited unique rhythmic feeding behavior under environmentally relevant concentrations of NMPs exposure, which may influence the bioaccumulation, trophic transfer, and environmental fate of NMPs.

Occurrence of microplastics in three types of household cleaning products and their estimated emissions into the aquatic environment

Microplastics (MPs) in household cleaning products are a significant source of primary MPs. However, their presence in these products remain largely unknown. In this study, three types of common household cleaning products (laundry detergents, toilet bowl cleaners, and dishwashing detergents) were examined to assess the presence of MPs. The potential global emissions of MPs into aquatic environments resulting from the use of these products were estimated using statistics on global wastewater treatment plants (WWTPs) and household cleaning product markets. The average abundance of MPs in household cleaning products was 564.97 ± 327.83 n·kg-1, with toilet bowl cleaners having a significantly higher abundance than the other two products. The most commonly detected polymers in these products were polyamide (PA), silicone, polyurethane (PU), acrylate copolymer (ACR), polyethylene (PE), and polyethylene terephthalate (PET), while the size of the MPs ranged from 21.34 to 442.97 μm, with 81.52 % being <50 μm and 87.32 % being fragment-shaped. The estimated annual MP emissions from these three types of household cleaning products were 3.88 × 1013 ± 1.35 × 1013, with toilet bowl cleaners accounting for 56.44 % of the total emissions. MPs directly released without treatment in WWTPs (2.46 × 1013 n year-1) accounted for 63.40 % of the total emissions, highlighting the importance of increasing the treated rate of wastewater to reduce MP emissions. Sensitivity tests indicated that increasing the MP removal rates of secondary and tertiary WWTPs could also effectively reduce MP emissions. Moreover, gross and per capita MP emissions in 149 countries showed significant differences, which could be attributed to population, market size, demand for household cleaning products, and the level of MP removal among different countries. The findings of this study provide important insights into controlling MP contamination in household cleaning products.