Analysis of Hydroxyl Radicals and Inactivation Mechanisms of Bacteriophage MS2 in Response to a Simultaneous Application of UV and Chlorine

Deciphering the virucidal potential of hydroxyl radical during ozonation: Implications for waterborne virus inactivation

The heightened public health risks associated with viral contamination in water have led to a strong emphasis on effective disinfection strategies. Ozone is a potent disinfectant widely employed for the inactivation of pathogens, yet comprehensive reports detailing the virucidal efficacy of hydroxyl radical (•OH) generated during ozonation are limited. The present research meticulously deciphered the role and influencing factors of •OH during ozone disinfection processes, elucidating how •OH enhanced ozone-mediated virus inactivation from both kinetic and molecular biological perspectives. The inactivation rate constants of ozone-derived •OH for Phi6 (9.67 × 1010 M-1 s-1) and PhiX174 (3.85 × 1010 M-1 s-1) were 4-5 orders of magnitude higher than those of ozone molecules. At 20 °C and pH 7.0, the contribution of •OH to the reduction of viral infectivity has been quantified as ranging from 11.3 % to 52.7 %. The yield of •OH increased notably as pH rose from 6.0 to 8.0, which was the principal cause for the accelerated apparent virus inactivation rates by ozone. An elevation in temperature (10-30 °C) had a negligible impact on •OH yield but facilitated virus removal by enhancing the reactivity of oxidants with viral particles. The damage inflicted on the viral genome by •OH vastly surpassed that caused by ozone, with the log reduction in gene copies in the presence of •OH being 297-343 % higher than the effect observed with ozone alone. The potential interaction sites of ozone and •OH with viral genetic material were predicted using Density Functional Theory static calculations and further compared. The present research offers comprehensive insights into the inactivation capabilities and underlying mechanisms of •OH for the effective control of waterborne viruses, establishing a theoretical foundation for employing the advanced oxidation properties of ozone-derived •OH in developing innovative water disinfection strategies.

"Nano knife" for efficient piezocatalytic inactivation of amoeba spores and their intracellular bacteria: Synergetic effect between physical damage and chemical oxidation

Microbial interactions between infectious agents severely interfere with the disinfection process, and current disinfection methods are unable to effectively inactivate intracellular pathogens, posing a new threat to drinking water safety. In this study, we first reported the high efficiency of piezocatalysis in inactivating amoebae and their intracellular bacteria. Results showed that the inactivation rates of the MoS2/rGO piezocatalytic system for amoebic spores and their intracellular bacteria were 4.18 and 5.02-log, respectively, within 180 min. Based on scavenger studies and ESR tests, the efficient inactivation of pathogens can be attributed to the generation of reactive oxygen species (ROS), and different pathogens exhibit varying tolerances to distinct ROS. Moreover, TEM analysis revealed that the sharp edge of MoS2/rGO was conducive to the physical cutting of amoeba's cell wall and membrane, promoting the attack of ROS and ensuring a more thorough deactivation. Additionally, the intracellular ROS produced by amoebae is not only conducive to the inactivation of amoebae but also the main reason for the inactivation of bacteria in spores. This study provides a new solution for the inactivation of amoeba spores and their intracellular bacteria and emphasizes the high efficiency of the synergistic effect of physical damage and chemical oxidation.

A critical review of ultra-violet light emitting diodes as a one water disinfection technology

UV light emitting diode (LED) disinfection technologies have advanced over the last decade and expanded the design space for applications in point of use, industrial, and now full-scale water treatment. This literature review examines the progression of UV LED technologies from 2007 to 2023 using key features such as total optical power, price, and wall-plug efficiency. The review found that optical power is increasing while the price per Watt is decreasing; however, the wall plug energy (WPE) is slowly improving over the last decade. These factors govern the feasibility of many UV LEDs applications and establish the current state of the art for these technologies. An analysis of inactivation rate constants for low-pressure, medium-pressure, and UV LED sources was undertaken and provides a comprehensive view of how current UV LED technologies compare to traditional technologies. This comparison found that UV LEDs perform comparably vs conventional UV technologies when disinfecting bacteria and viruses. Furthermore, comparison of reported reduction equivalent fluences for UV LED flow-through reactors at the bench-, pilot-, and full-scale were explored in this review, and it was found that LED treatment is becoming more effective at handling increased flowrates and has been proven to work at full-scale. UV LEDs do however require additional research into the impacts of water matrices at different wavelengths and the impact that each available LED wavelength has on disinfection. Overall, this work provides a broad assessment of UV disinfection technologies and serves as a state-of-the-art reference document for those who are interested in understanding this rapidly developing technology.

The coagulation process for enveloped and non-enveloped virus removal in turbid water: Removal efficiencies, mechanisms and its application to SARS-CoV-2 Omicron BA.2

The coagulation process has a high potential as a treatment method that can handle pathogenic viruses including emerging enveloped viruses in drinking water treatment process which can lower infection risk through drinking water consumption. In this study, a surrogate enveloped virus, bacteriophage Փ6, and surrogate non-enveloped viruses, including bacteriophage MS-2, T4, ՓX174, were used to evaluate removal efficiencies and mechanisms by the conventional coagulation process with alum, poly‑aluminum chloride, and ferric chloride at pH 5, 7, and 9 in turbid water. Also, treatability of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), a recent virus of global concern by coagulation was evaluated as SARS-CoV-2 can presence in drinking water sources. It was observed that an increase in the coagulant dose enhanced the removal efficiency of turbidity and viruses, and the condition that provided the highest removal efficiency of enveloped and non-enveloped viruses was 50 mg/L of coagulants at pH 5. In addition, the coagulation process was more effective for enveloped virus removal than for the non-enveloped viruses, and it demonstrated reduction of SARS-CoV-2 Omicron BA.2 over 0.83-log with alum. According to culture- and molecular-based assays (qPCR and CDDP-qPCR), the virus removal mechanisms were floc adsorption and coagulant inactivation. Through inactivation with coagulants, coagulants caused capsid destruction, followed by genome damage in non-enveloped viruses; however, damage to a lipid envelope is suggested to contribute to a great extend for enveloped virus inactivation. We demonstrated that conventional coagulation is a promising method for controlling emerging and re-emerging viruses in drinking water.

Study on the inactivation effect and mechanism of EGCG disinfectant on Bacillus subtilis

The widespread use of chlorine-based disinfectants in drinking water treatment has led to the proliferation of chlorine-resistant bacteria and the risk of disinfection byproducts (DBPs), posing a serious threat to public health. This study aims to explore the effectiveness and potential applications of epigallocatechin gallate (EGCG) against chlorine-resistant Bacillus and its spores in water, providing new insights for the control of chlorine-resistant bacteria and improving the biological stability of distribution systems. The inactivation effects of EGCG on Bacillus subtilis (B. subtilis) and its spores were investigated using transmission electron microscopy, ATP measurement, and transcriptome sequencing analysis to determine changes in surface structure, energy metabolism, and gene expression levels, thereby elucidating the inactivation mechanism. The results demonstrate the potential application of EGCG in continuously inhibiting chlorine-resistant B. subtilis in water, effectively improving the biological stability of the distribution system. However, EGCG is not suitable for treating raw water with high spore content and is more suitable as a supplementary disinfectant for processes with strong spore removal capabilities, such as ozone, ultraviolet, or ultrafiltration. EGCG exhibits a disruptive effect on the morphological structure and energy metabolism of B. subtilis and suppresses the synthesis of substances, energy metabolism, and normal operation of the antioxidant system by inhibiting the expression of multiple genes, thereby achieving the inactivation of B. subtilis.

Mitigation of viruses of concern and bacteriophage surrogates via common unit processes for water reuse: A meta-analysis

Water reuse is a growing global reality. In regulating water reuse, viruses have come to the fore as key pathogens due to high shedding rates, low infectious doses, and resilience to traditional wastewater treatments. To demonstrate the high log reductions required by emerging water reuse regulations, cost and practicality necessitate surrogates for viruses for use as challenge organisms in unit process evaluation and monitoring. Bacteriophage surrogates that are mitigated to the same or lesser extent than viruses of concern are routinely used for individual unit process testing. However, the behavior of these surrogates over a multi-barrier treatment train typical of water reuse has not been well-established. Toward this aim, we performed a meta-analysis of log reductions of common bacteriophage surrogates for five treatment processes typical of water reuse treatment trains: advanced oxidation processes, chlorination, membrane filtration, ozonation, and ultraviolet (UV) disinfection. Robust linear regression was applied to identify a range of doses consistent with a given log reduction of bacteriophages and viruses of concern for each treatment process. The results were used to determine relative conservatism of surrogates. We found that no one bacteriophage was a representative or conservative surrogate for viruses of concern across all multi-barrier treatments (encompassing multiple mechanisms of virus mitigation). Rather, a suite of bacteriophage surrogates provides both a representative range of inactivation and information about the effectiveness of individual processes within a treatment train. Based on the abundance of available data and diversity of virus treatability using these five key water reuse treatment processes, bacteriophages MS2, phiX174, and Qbeta were recommended as a core suite of surrogates for virus challenge testing.

Approaching easy water disinfection for all: Can in situ electrochlorination outperform conventional chlorination under realistic conditions?

Electrochlorination has gained research interest for its potential application as decentralized water treatment. A number of studies have displayed promising efficiency for water disinfection. However, a comprehensive comparison of in situ electrodisinfection to existing disinfection techniques, particularly under realistic water composition and flow rates, still needs additional research efforts. The aim of this study is to evaluate in situ electrochlorination while comparing the treatment with conventional chemical chlorination for point-of-entry decentralized disinfection at the household level. An electrochemical flow cell reactor was operated in a single pass mode considering water flow and water consumption for a household of four family members. Disinfection efficiency assessment of both electrochemical and chemical chlorination was conducted using bacterial and viral surrogates, E. coli and MS2 bacteriophage. Furthermore, a techno-economic analysis was conducted, using the levelized cost of water, to compare two electrochemical chlorination scenarios (i.e., electrical grid energy use, and solar panel powered system) and benchmarked against the baseline treatment of chemical chlorination. The findings revealed increased inactivation efficiency of in situ electrochlorination over conventional chlorination (p-value < 0.05). The synergetic impact of radicals and chlorine, and/or contribution of high chlorine concentration at acidic pH near anode surface were identified as key factors that could enhance disinfection performance of in situ electrochlorination. The techno-economic analysis demonstrated that electrochemical treatment, when operated using renewable energy sources, is not only a more environmentally sustainable approach, but also emerges as a more economically feasible solution for decentralized water treatment application. The results highlight that in situ electrochlorination is a more advanced alternative to decentralized water chlorination. However, further fundamental research on products and by-products formation under various water matrices is required.

Ultraviolet germicidal irradiation: A prediction model to estimate UV-C-induced infectivity loss in single-strand RNA viruses

Ultraviolet germicidal irradiation (UVGI) disinfection technology is effective in inactivating microorganisms. However, its performance can vary against different microorganisms due to their diverse structural and genomic features. Thus, rapid predictions of UV (254 nm) inactivation kinetics are essential, particularly for highly infectious emerging pathogens, such as SARS-CoV-2, during the extemporary COVID-19 pandemic. In this study, aiming at single-strand RNA (ssRNA) viruses, an improved genomic model was introduced to predict the UV inactivation kinetics of viral genomes using genome sequence data. First, the overall virus infectivity loss in an aqueous matrix was estimated as the sum of damage to both the entire genome and the protein capsid. Then, the "UV rate constant ratio of aerosol and liquid" was used to convert the UV rate constant for viruses in a liquid-based matrix to an airborne state. The prediction model underwent both quantitative and qualitative validation using experimental data from this study and the literature. Finally, with the goal of mitigating potential airborne transmission of ssRNA viruses in indoor environments, this paper summarizes existing in-duct UVGI system designs and evaluates their germicidal performance. The prediction model may serve as a preliminary tool to assess the effectiveness of a UVGI system for emerging or unculturable viruses or to estimate the required UV dose when designing such a system.

Polarization Engineered p-Type Electron Blocking Layer Free AlGaN Based UV-LED Using Quantum Barriers with Heart-Shaped Graded Al Composition for Enhanced Luminescence

In this paper, in order to address the problem of electron leakage in AlGaN ultra-violet light-emitting diodes, we have proposed an electron-blocking free layer AlGaN ultra-violet (UV) light-emitting diode (LED) using polarization-engineered heart-shaped AlGaN quantum barriers (QB) instead of conventional barriers. This novel structure has decreased the downward band bending at the interconnection between the consecutive quantum barriers and also flattened the electrostatic field. The parameters used during simulation are extracted from the referred experimental data of conventional UV LED. Using the Silvaco Atlas TCAD tool; version 8.18.1.R, we have compared and optimized the optical as well as electrical characteristics of three varying LED structures. Enhancements in electroluminescence at 275 nm (52.7%), optical output power (50.4%), and efficiency (61.3%) are recorded for an EBL-free AlGaN UV LED with heart-shaped Al composition in the barriers. These improvements are attributed to the minimized non-radiative recombination on the surfaces, due to the progressively increasing effective conduction band barrier height, which subsequently enhances the carrier confinement. Hence, the proposed EBL-free AlGaN LED is the potential solution to enhance optical power and produce highly efficient UV emitters.

Virus on surfaces: Chemical mechanism, influence factors, disinfection strategies, and implications for virus repelling surface design

While SARS-CoV-2 is generally under control, the question of variants and infections still persists. Fundamental information on how the virus interacts with inanimate surfaces commonly found in our daily life and when in contact with the skin will be helpful in developing strategies to inhibit the spread of the virus. Here in, a critically important review of current understanding of the interaction between virus and surface is summarized from chemistry point-of-view. The Derjaguin-Landau-Verwey-Overbeek and extended Derjaguin-Landau-Verwey-Overbeek theories to model virus attachments on surfaces are introduced, along with the interaction type and strength, and quantification of each component. The virus survival and transfer are affected by a combination of biological, physical, and chemical parameters, as well as environmental parameters. The surface properties for virus and virus survival on typical surfaces such as metals, plastics, and glass are summarized. Attention is also paid to the transfer of virus to/from surfaces and skin. Typical virus disinfection strategies utilizing heat, light, chemicals, and ozone are discussed together with their disinfection mechanism. In the last section, design principles for virus repelling surface chemistry such as surperhydrophobic or surperhydrophilic surfaces are also introduced, to demonstrate how the integration of surface property control and advanced material fabrication can lead to the development of functional surfaces for mitigating the effect of viral infection upon contact.

Comparison of inactivation characteristics between Gram-positive and Gram-negative bacteria in water by synergistic UV and chlorine disinfection

Disinfection is essential in water and wastewater treatment process as a guarantee for microbial safety. This study systematically investigated: (i) the inactivation characteristics of bacteria widely existed in water, including Gram-negative bacteria (Escherichiacoli) and Gram-positive bacteria (Staphylococcus aureus and Bacillus subtilis spores), by sequential UV and chlorine disinfection processes (UV-Cl and Cl-UV), simultaneous UV and chlorine disinfection process (UV/Cl); and (ii) the disinfection mechanisms on different bacteria. The combination of UV and chlorine disinfection could inactive bacteria at lower doses, but showed no synergistic effect on E. coli. Contrarily, disinfection results indicated that UV/Cl performed an obvious synergistic effect on highly disinfectant-resistant bacteria (e.g. S. aureus and B. subtilis spores). Specifically, UV/Cl at the UV dose of 9 mJ/cm2 and chlorine dose of 2 mg-Cl/L could inactivate S. aureus completely. Moreover, the effectiveness of UV/Cl on the removal of indigenous bacteria in actual water conditions was also confirmed. In short, the study provides significant theoretical and practical implications for ensuring microbial safety during water treatment and use.

Viral inactivation using microwave-enhanced membrane filtration

Pathogenic viruses (e.g., Enteroviruses, Noroviruses, Rotaviruses, and Adenovirus) present in wastewater, even at low concentrations, can cause serious waterborne diseases. Improving water treatment to enhance viral removal is of paramount significance, especially given the COVID-19 pandemic. This study incorporated microwave-enabled catalysis into membrane filtration and evaluated viral removal using a model bacteriophage (MS2) as a surrogate. Microwave irradiation effectively penetrated the PTFE membrane module and enabled surface oxidation reactions on the membrane-coated catalysts (i.e., BiFeO₃), which thus elicited strong germicidal effects via local heating and radical formation as reported previously. A log removal of 2.6 was achieved for MS2 within a contact time as low as 20 s using 125-W microwave irradiation with the initial MS2 concentration of 10⁵ PFU∙mL^-1. By contrast, almost no inactivation could be achieved without microwave irradiation. COMSOL simulation indicates that the catalyst surface could be heated up to 305 ^oC with 125-W microwave irradiation for 20 s and also analyzed microwave penetration into catalyst or water film layers. This research provides new insights to the antiviral mechanisms of this microwave-enabled catalytic membrane filtration.

UV-chlorine advanced oxidation for potable water reuse: A review of the current state of the art and research needs

This paper reports conclusions from a recent study completed for the Water Research Foundation and the State of California to offer guidance on UV-chlorine advanced oxidation for potable water reuse. The fundamentals of UV-chlorine advanced oxidation are discussed, and lessons learned from some of the early adopters of this technology are presented. Important highlights include the significant impact of ammonia and chloramines on UV-chlorine treatment, challenges associated with predicting UV-chlorine performance due to complex photochemistry, and an ongoing need to monitor potential byproducts and transformation products when employing any form of advanced oxidation for potable reuse.

Inactivation of phage phiX174 by UV254 and free chlorine: Structure impairment and function loss

Disinfection is widely applied in water and wastewater treatment to inactivate viruses. However, the inactivation mechanism associated with viral structural alteration during disinfection is still not clear. In this work, inactivation of bacteriophage phiX174 by ultraviolet radiation (UV₂₅₄) and free chlorine (FC), two most commonly used disinfection processes, was studied at the molecular level to investigate the relationship between phiX174 genome impairment and virus inactivation, and the correlation between protein impairment and function loss. Double-layer agar technique, quantitative real-time polymerase chain reaction (qPCR), real-time reverse transcription-polymerase chain reaction (RT-qPCR), and liquid chromatography-tandem mass spectrometry techniques (LC-MS/MS), together with structure impairment and function experiments were implemented to quantitatively analyze the inactivation and damage to genome and proteins of phiX174. Results showed that UV₂₅₄ and FC could effectively inactivate phiX174 at the practical doses (UV₂₅₄ dose of 30 mJ/cm², and FC of 1-3 mg/L) used in water treatment plants, accompanied with the damage to viral genome and proteins. Specifically, a UV₂₅₄ irradiation dose of 9.6 mJ/cm², and FC at an initial concentration of 1 mg/L at 4 min could lead to a 4-log₁₀ inactivation. Nevertheless, the combination of these two methods at selected doses played no significant synergistic disinfection effect. During UV₂₅₄ disinfection, the proportion of phiX174 with damaged genome was similar with that of the inactivated phiX174. In addition, UV₂₅₄ and FC could disrupt proteins of phiX174 such as H protein, thereby hindering the physiological function associated with these proteins. With these findings, it is suggested that UV₂₅₄ and FC disinfection could hinder the injection of the viral genome into host cells, thus resulting in the inactivation of phiX174. This work provides a comprehensive study of the inactivation mechanism of phiX174, which can enhance the applicability of UV₂₅₄ and FC in water treatment plants, and facilitate the design and optimization of disinfection technologies for virus control in drinking water and wastewater worldwide to ensure the biosafety.

Insight into the performance of UV/chlorine/TiO2 on carbamazepine degradation: The crucial role of chlorine oxide radical (ClO•)

The UV/chlorine (UC) system is a homogeneous advanced oxidation process with increasing attention in water decontamination. The addition of TiO₂ is a newly found strategy to enhance the generation of hydroxyl radical (HO^•) and chlorine radical (Cl^•) in the UC system. However, the crucial role of chlorine oxide radical (ClO^•, generated by the reactions of HO^• and Cl^• with chlorine) on pollutant degradation, has not been noticed in UV/chlorine/TiO₂ (UCT), the heterogeneous photocatalytic system for chlorine activation. Herein, the role of ClO^• in UCT was clarified through quenching experiments combined with model simulations during carbamazepine degradation. Tert-butyl alcohol completely inhibited while bicarbonate only partly suppressed carbamazepine degradation in UCT, indicating the important role of ClO^•. The second-order reaction rate constant between ClO^• and carbamazepine (k_{ClO•,carbamazepine}) was fitted to be (1.21 ± 0.08) × 10⁷ M^-1 s^-1 by the kinetic model, which avoided the influence of carbonate radical (CO₃^•-), whose contribution couldn't be excluded during k_{ClO•,carbamazepine} determination in commonly used competitive kinetic methods with bicarbonate. With the obtained k_{ClO•,carbamazepine}, model simulation suggested that ClO^• contributed about 50 % to carbamazepine degradation in UCT, and its concentration was less affected under varied conditions (solution pH, chlorine, bicarbonate, and chloride concentration) to keep an efficient carbamazepine degradation. On the contrary, pollutant degradation dominated by HO^• in UCT was largely inhibited with the increase of pH, chlorine, and bicarbonate concentration. In addition to the promotion of degradation efficiency, less disinfection byproducts and lower energy requirement were found in UCT compared with UC. Furthermore, UCT could maintain satisfactory degradation efficiency and energy saving in ground water and surface water samples. Results of this study unraveled the crucial role of ClO^• for pollutant degradation in UCT, and showed bright prospects and great potentials of the system in water treatment.

Viral disinfection using nonthermal plasma: A critical review and perspectives on the plasma-catalysis system

The transmission of viral infections via aerosol has become a serious threat to public health. This has produced an ever-increasing demand for effective forms of viral inactivation technology/processes. Plasma technology is rising in popularity and gaining interest for viral disinfection use. Due to its highly effectively disinfection and flexible operation, non-thermal plasma (NTP) is a promising technology in decontaminating bacteria or virus from air or surfaces. This review discusses the fundamentals of non-thermal plasma and the disinfection mechanisms of the biocidal agents produced in plasma, including ultraviolet (UV) photons, reactive oxygen species, and reactive nitrogen species. Perspectives on the role of catalysts and its potential applications in cold plasma disinfection are discussed.

Synergistic effects of UV and chlorine in bacterial inactivation for sustainable water reclamation and reuse

Disinfection is a necessity in water and wastewater treatment and reclamation. This study examined the inactivation of a disinfectant resistant but widely existed opportunistic pathogen in reclaimed water, Staphylococcus aureus (S. aureus), by sequential UV and chlorine disinfection or simultaneous UV and chlorine disinfection (UV/Cl). It was identified that UV/Cl greatly promoted the inactivation efficacy and inhibited photoreactivation of S. aureus by the generation of free radicals (i.e. OH and Cl), which reached a 7-log₁₀ reduction at UV and chlorine doses of 18 mJ/cm² and 2 mg-Cl/L, respectively. The changes of bacterial viability and morphology and the increase of extracellular ATP concentration confirmed the enhancement of cell membranes damages (>21.4 %) due to free radicals generated in UV/Cl process, which caused a dramatic reduction in metabolic activity and suppressed the photoreactivation. Furthermore, this study demonstrated that UV/Cl effectively removed heterotrophic plate count bacteria and aromatic organic fluorophores in reclaimed water samples. This study is of significant theoretical and applicable importance in guaranteeing safe microbial levels for water reclamation and reuse.

Control for chlorine resistant spore forming bacteria by the coupling of pre-oxidation and coagulation sedimentation, and UV-AOPs enhanced inactivation in drinking water treatment

Spore forming bacteria (SFB) are strongly chlorine resistant. Their presence in drinking water may cause diseases and pose threat to public health. Three SFB strains, i.e. Bacillus alvei, Bacillus cereus, and Lysinibacillus fusiformis, were isolated and identified from the finished water of a drinking water treatment plant where bacteria colonies occasionally reached the limit value. Due to their chlorine resistance, a SFB control strategy coupling pre-oxidation, coagulation sedimentation, and UV-AOPs inactivation in water treatment process was studied in lab scale. Five minutes pre-oxidation treatment by applying Cl₂ and ClO₂ induced remarkable spore transformation. Longer pre-oxidation exposure time didn't have apparent improvement. Cl₂ and ClO₂ dosages of 0.9 mg/L and 0.5 mg/L were suggested, respectively. The formed spores can be efficiently removed by the following coagulation sedimentation treatment. At a suggested dosage combination of 20 mg/L PAC and 0.08 mg/L PAM, spore removal efficiency reached about 3.15-lg. Comparing to applying sole UV irradiation, enhanced UV inactivation by adding 0.1 mM H₂O₂, or Cl₂, or peroxymonosulfate (PMS) substantially improved the inactivation of the most chlorine resistant SFB strain, Lysinibacillus fusiformis. UV-AOPs stably achieved 2-lg inactivation rate at UV dosage of 40 mJ/cm². UV/H₂O₂, UV/Cl₂ and UV/PMS inactivation kinetically enhanced 1.20 times, 1.36 times and 1.91 times over sole UV irradiation. Intracellular DNA and ATP leakages were detected, and remarkable damages of Lysinibacillus fusiformis cells' surface and ultrastructure were observed. These findings evidenced cell wall and cell membrane destructions, guaranteeing substantial SFB cells inactivation. This study was carried out based on three SFB strains isolated from a finished water, and common engineering practical operations. By providing engineeringly relevant references, the outcomes obtained would be helpful for dealing with SFB outbreak risk in drinking water treatment.

Investigation of mouse hepatitis virus strain A59 inactivation under both ambient and cold environments reveals the mechanisms of infectivity reduction following UVC exposure

The surface contamination of SARS-CoV-2 is becoming a potential source of virus transmission during the pandemic of COVID-19. Under the cold environment, the infection incidents would be more severe with the increase of virus survival time. Thus, the disinfection of contaminated surfaces in both ambient and cold environments is a critical measure to restrain the spread of the virus. In our study, it was demonstrated that the 254 nm ultraviolet-C (UVC) is an efficient method to inactivate a coronavirus, mouse hepatitis virus strain A59 (MHV-A59). The inactivation rate to MHV-A59 coronavirus was up to 99.99% when UVC doses were 2.90 and 14.0 mJ/cm² at room temperature (23 °C) and in cold environment (-20 °C), respectively. Further mechanistic study demonstrated that UVC could induce spike protein damage to partly impede virus attachment and genome penetration processes, which contributes to 12% loss of viral infectivity. Additionally, it can induce genome damage to significantly interrupt genome replication, protein synthesis, virus assembly and release processes, which takes up 88% contribution to viral inactivation. With these mechanistic understandings, it will greatly contribute to the prevention and control of the current SARS-CoV-2 transmissions in cold chains (low temperature-controlled product supply chains), public area such as airport, school, and warehouse.

Application of Metal Nanoparticles for Production of Self-Sterilizing Coatings

Metal nanoparticles (NPs) are increasingly being used in many areas, e.g., industry, pharmacy, and biomedical engineering. NPs can be obtained through chemical and biological synthesis or using physical methods. AgNPs, AuNPs, CuNPs, FeNPs, MgNPs, SnO2NPs, TiO2NPs, and ZnONPs are the most commonly synthesized metal nanoparticles. Many of them have anti-microbial properties and documented activity supported by many tests against some species of pathogenic bacteria, viruses, and fungi. AgNPs, which are used for the production of commercial self-sterilizing packages, are one of the best-explored nanoparticles. Moreover, the EFSA has approved the use of small doses of silver nanoparticles (0.05 mg Ag·kg−1) to food products. Recent studies have shown that metal NPs can be used for the production of coatings to prevent the spread of the SARS-CoV-2 virus, which has caused the global pandemic. Some nanoparticles (e.g., ZnONPs and MgONPs) have the Generally Recognized As Safe (GRAS) status, i.e., they are considered safe for consumption and can be used for the production of edible coatings, protecting food against spoilage. Promising results have been obtained in research on the use of more than one type of nanometals, which prevents the development of pathogen resistance through various mechanisms of inactivation thereof.

Molecular insights into formation of nitrogenous disinfection byproducts from algal organic matter in UV-LEDs/chlorine process based on FT-ICR analysis

Eutrophication is a globally concerned issue, which brings algal cells and algal organic matter (AOM) into drinking water treatment plants. AOM is an important branch of nitrogenous disinfection byproduct (N-DBP) precursors. The variation of AOM composition in UV-LEDs/chlorine process, and its relationship with N-DBP formation still remain much uncertainty. Herein, we used fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) to investigate AOM transformation in UV-LEDs/chlorine process, with UV₂₈₅ and UV₃₆₅ as light source, and screen for typical precursors of N-DBPs. We found that more nitrogen-containing compounds were generated after UV-LEDs/chlorine process, leading to the larger formation of N-DBPs in postchlorination. Compounds such as lignin, proteins, and amino sugars tends to be oxidized by reactive species in UV-LEDs/chlorine process. Further, compounds with higher O/C and higher weighted average double bond equivalence (DBE_w) are easier to form N-DBPs, including dichloroacetonitrile and trichloronitromethane. Also, influence factors including pH, UV fluence, post-chlorination time and bromide concentration on N-DBP formation were evaluated. The results show that N-DBP formation generally followed the order of UV₂₈₅/chlorine-postchlorination, UV₃₆₅/chlorine-postchlorination, and direct chlorination. Our study provides comprehensive information on N-DBP formation from AOM in UV-LEDs/chlorine-postchlorination from molecular levels.

UV/Chlorine Process: An Efficient Advanced Oxidation Process with Multiple Radicals and Functions in Water Treatment

Because of the deterioration of global water quality, the occurrence of chemical and microbial contaminants in water raises serious concerns for the health of the population. Identifying and developing effective and environmentally friendly water treatment technologies are critical to obtain clean water. Among the various technologies for the purification of water, ultraviolet photolysis of chlorine (UV/chlorine), an emerging advanced oxidation process (AOP), has multiple functions for the control of contaminants via the production of hydroxyl radicals (HO·) and reactive chlorine species (RCS), such as Cl·, ClO·, and Cl₂·^-.This Account centers around the radical chemistry of RCS and HO· in different water matrices and their roles and mechanisms in the abatement of contaminants. The concentrations of Cl·, ClO·, and Cl₂·^- are comparable to or higher than those of HO· (10^-14 to 10^-13 M). The reactivities of RCS are more selective than HO· with a broader range of second-order rate constants (k). The k values of Cl· toward most aromatics are higher or similar as compared to those of HO·, while those of Cl₂·^- and ClO· are less reactive but more selective toward aromatics containing electron-donating functional groups. Their major reaction mechanisms with Cl· are electron transfer and addition, while those with ClO· and Cl₂·^- primarily involve electron transfer. As for aliphatics, their reactivities with both HO· and RCS are much lower than those of aromatics. The reaction mechanisms for most of them with Cl· and Cl₂·^- are hydrogen abstraction, except for olefins, which are addition. In addition, RCS greatly contribute to the inactivation of microbial contaminants.Toward future application, the UV/chlorine process has both pros and cons. Compared with the traditional HO·-based AOP of UV/H₂O₂, UV/chlorine is more efficient and energy-saving for oxidation and disinfection, and its efficiency is less affected by water matrix components. However, the formation of toxic byproducts in UV/chlorine limits its application scenarios. In dissolved organic matter (DOM)-rich water, the formation of halogenated byproducts is enhanced in UV/chlorine. In the presence of ammonia, reactive nitrogen species (RNS) (e.g., ·NO and ·NO₂) are involved, and highly toxic nitro(so) products such as nitro(so)-phenolics and N-nitrosodimethylamine are generated. For a niche application, the UV/chlorine process is recommended to be utilized in water with low levels of DOM and ammonia.Strategies should be developed to make full use of highly reactive species (RCS and HO·) for the abatement of target contaminants and to reduce the formation of toxic byproducts. For example, the UV/chlorine process can be used in tandem with other treatments to create multiple barriers for the production of safe water. In addition, halogen radicals are very important in ecosystems as well as other areas such as medical therapy and organic synthesis. UV/chlorine is the most efficient homogeneous system to generate halogen radicals, and thus it provides a perfect system to investigate the fates of halogen radicals for interdisciplinary research.

From Conventional Disinfection to Antibiotic Resistance Control-Status of the Use of Chlorine and UV Irradiation during Wastewater Treatment

Extensive use of antibiotics for humans and livestock has led to an enhanced level of antibiotic resistance in the environment. Municipal wastewater treatment plants are regarded as one of the main sources of antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) in the aquatic environment. A significant amount of research has been carried out to understand the microbiological quality of wastewater with respect to its antibiotic resistance potential over the past several years. UV disinfection has primarily been used to achieve disinfection, including damaging DNA, but there has been an increasing use of chlorine and H₂O₂-based AOPs for targeting genes, including ARGs, considering the higher energy demands related to the greater UV fluences needed to achieve efficient DNA damage. This review focuses on some of the most investigated processes, including UV photolysis and chlorine in both individual and combined approaches and UV advanced oxidation processes (AOPs) using H₂O₂. Since these approaches have practical disinfection and wastewater treatment applications globally, the processes are reviewed from the perspective of extending their scope to DNA damage/ARG inactivation in full-scale wastewater treatment. The fate of ARGs during existing wastewater treatment processes and how it changes with existing treatment processes is reviewed with a view to highlighting the research needs in relation to selected processes for addressing future disinfection challenges.

Photolysis of free chlorine and production of reactive radicals in the UV/chlorine system using polychromatic spectrum LEDs as UV sources

Recently, ultraviolet light-emitting diodes (UV-LEDs) and chlorine combined system has been employed as an emerging advanced oxidation process. However, UV-LEDs were commonly considered as monochromatic UV sources. In this study, the obvious quantum yields of chlorine photolysis under 265 nm and 280 nm LEDs irradiations were investigated with treating LEDs as polychromatic UV sources. Particularly, Φ_obs-poly of HOCl and OCl⁻ for 265 nm LED were found to be 1.50 and 0.70 mol E^-1, respectively, whereas Φ_obs-poly of HOCl and OCl⁻ for 280 nm LED were 1.28 and 0.64 mol E^-1, respectively. It was identified that Φ_obs-poly were 5.66-14.63 % lower than Φ_obs-mono. This suggests that obvious quantum yield using peak emission wavelength would overestimate the true quantum yield. The production of radical species in LED UV/chlorine systems were determined by the degradation of BA, and illustrated by a mathematical model. Different trends were observed for 265 nm and 280 nm LED UV/chlorine systems as pH increased from 5.0 to 10.0. As pH increased, the formation of OH continuously decreased in both 265 nm and 280 nm LED systems. The formation of Cl increased at neutral pH and more Cl and OH were formed due to the higher molar absorbance coefficient at 280 nm. The chlorine dose-dependent effects on radical productions at pH of 5.0, 7.5 and 10.0 were also assessed. At pH of 5.0, OH was the main radical product and had linear correlation with chlorine dose. At pH of 7.5, the productions of OH and Cl showed similar profiles that increased rapidly at low chlorine dosage and then slowed down.

Hydrodynamic cavitation efficiently inactivates potato virus Y in water

Waterborne plant viruses can destroy entire crops, leading not only to high financial losses but also to food shortages. Potato virus Y (PVY) is the most important potato viral pathogen that can also affect other valuable crops. Recently, it has been confirmed that this virus is capable of infecting host plants via water, emphasizing the relevance of using proper strategies to treat recycled water in order to prevent the spread of the infectious agents. Emerging environmentally friendly methods such as hydrodynamic cavitation (HC) provide a great alternative for treating recycled water used for irrigation. In the experiments conducted in this study, laboratory HC based on Venturi constriction with a sample volume of 1 L was used to treat water samples spiked with purified PVY virions. The ability of the virus to infect plants was abolished after 500 HC passes, corresponding to 50 min of treatment under pressure difference of 7 bar. In some cases, shorter treatments of 125 or 250 passes were also sufficient for virus inactivation. The HC treatment disrupted the integrity of viral particles, which also led to a minor damage of viral RNA. Reactive species, including singlet oxygen, hydroxyl radicals, and hydrogen peroxide, were not primarily responsible for PVY inactivation during HC treatment, suggesting that mechanical effects are likely the driving force of virus inactivation. This pioneering study, the first to investigate eukaryotic virus inactivation by HC, will inspire additional research in this field enabling further improvement of HC as a water decontamination technology.

Self-Driven Pretreatment and Room-Temperature Storage of Water Samples for Virus Detection Using Enhanced Porous Superabsorbent Polymer Beads

The continuous emergence of infectious viral diseases has become a major threat to public health. To quantify viruses, proper handling of water samples is required to ensure the accuracy and reliability of the testing results. In this study, we develop enhanced porous superabsorbent polymer (PSAP) beads to pretreat and store water samples for virus detection. By applying PSAP beads to collect water samples, the viruses are captured and encapsulated inside the beads while undesired components are excluded. We have successfully demonstrated that the shelf life of the model virus can be effectively extended at room temperature (22 °C) and an elevated temperature (35 °C). Both the infectivity level and genome abundance of the viruses are preserved even in a complex medium such as untreated wastewater. Under the tested conditions, the viral degradation rate constant can be reduced to more than 10 times using the PSAP beads. Therefore, the enhanced PSAP beads provide a low-cost and efficient sample pretreatment and storage method that is feasible and practical for large-scale surveillance of viral pathogens in water samples.

Antiviral nanoparticles for sanitizing surfaces: A roadmap to self-sterilizing against COVID-19

Nanoparticles provide new opportunities in merging therapeutics and new materials, with current research efforts just beginning to scratch the surface of their diverse benefits and potential applications. One such application, the use of inorganic nanoparticles in antiseptic coatings to prevent pathogen transmission and infection, has seen promising developments. Notably, the high reactive surface area to volume ratio and unique chemical properties of metal-based nanoparticles enables their potent inactivation of viruses. Nanoparticles exert their virucidal action through mechanisms including inhibition of virus-cell receptor binding, reactive oxygen species oxidation and destructive displacement bonding with key viral structures. The prevention of viral outbreaks is one of the foremost challenges to medical science today, emphasizing the importance of research efforts to develop nanoparticles for preventative antiviral applications. In this review, the use of nanoparticles to inactivate other viruses, such as influenza, HIV-1, or norovirus, among others, will be discussed to extrapolate broad-spectrum antiviral mechanisms that could also inhibit SARS-CoV-2 pathogenesis. This review analyzes the published literature to highlight the current state of knowledge regarding the efficacy of metal-based nanoparticles and other antiviral materials for biomedical, sterile polymer, and surface coating applications.

Removal of antibiotic resistance genes and inactivation of antibiotic-resistant bacteria by oxidative treatments

The persistence of antibiotics in the environment because of human activities, such as seafood cultivation, has attracted great attention as they can give rise to antibiotic resistance genes (ARGs) and antibiotic-resistant bacteria (ARB). In this study, we explored the inactivation and removal efficiencies of Escherichia coli SR1 and sul1 (plasmid-encoded ARGs), respectively, in their extracellular and intracellular forms (eARGs and iARGs) by three commonly used fishery oxidants, namely chlorine, bromine, and potassium permanganate (KMnO₄), at the practical effective concentration range (0.5, 5, and 15 mg/L). Kinetics data were obtained using laboratory phosphate-buffered saline (PBS). Following the same fishery oxidation methods, the determined kinetics models were tested by studying the SR1 and sul1 disinfection efficiencies in (sterilized) pond water matrix. At concentrations of 5 and 15 mg/L, all three oxidants achieved sufficient cumulative integrated exposure (CT values) to completely inactivate SR1 and efficiently remove sul1 (up to 4.0-log). The oxidation methods were then applied to an unsterilized pond water matrix in order to study and evaluate the indigenous ARB and ARGs disinfection efficiencies in aquaculture, which reached 1.4-log and 1.0-log during treatment with fishery oxidants used in pond preparation at high concentrations before stocking (5-15 mg/L), respectively. A high chlorine concentration (15 mg/L) could efficiently remove ARGs (or iARGs) from pond water, and the iARG removal efficiency was higher than that of eARGs in pond water. The method and results of this study could aid in guiding future research and practical disinfection to control the spread of ARGs and ARB in aquaculture.

Assessment of the UV/Chlorine Process in the Disinfection of Pseudomonas aeruginosa: Efficiency and Mechanism

UV irradiation and chlorination have been widely used for water disinfection. However, there are some limitations, such as the risk of generating viable but nonculturable bacteria and bacteria reactivation when using UV irradiation or chlorination alone. This study comprehensively evaluated the feasibility of the UV/chlorine process in drinking water disinfection, and Pseudomonas aeruginosa was selected as the target microorganism. The number of culturable cells was effectively reduced by more than 5 orders of magnitude (5-log₁₀) after UV, chlorine, and UV/chlorine treatments. However, intact and VBNC cells were detected at 10³ to 10⁴ cells/mL after UV and chlorine treatments, whereas they were undetectable after UV/chlorine treatment due to the primary contribution of reactive chlorine species (Cl^•, Cl₂^•-, and ClO^•). After UV/chlorine treatment, the metabolic activity determined using single cell Raman spectroscopy was much lower than that after UV. The level of toxic opr gene in P. aeruginosa decreased by more than 99% after UV/chlorine treatment. Importantly, bacterial dark reactivation was completely suppressed by UV/chlorine treatment but not UV or chlorination. This study suggests that the UV/chlorine treatment can completely damage bacteria and is promising for pathogen inactivation to overcome the limitations of UV and chlorine treatments alone.

Molecular characterization of transformation and halogenation of natural organic matter during the UV/chlorine AOP using FT-ICR mass spectrometry

UV/chlorine process, as an emerging advanced oxidation process (AOP), was effective for removing micro-pollutants via various reactive radicals, but it also led to the changes of natural organic matter (NOM) and formation of disinfection byproducts (DBPs). By using negative ion electrospray ionization coupled with Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS), the transformation of Suwannee River NOM (SRNOM) and the formation of chlorinated DBPs (Cl-DBPs) in the UV/chlorine AOP and subsequent post-chlorination were tracked and compared with dark chlorination. In comparison to dark chlorination, the involvement of ClO^•, Cl^•, and HO^• in the UV/chlorine AOP promoted the transformation of NOM by removing the compounds owning higher aromaticity (AI_mod) value and DBE (double-bond equivalence)/C ratio and causing the decrease in the proportion of aromatic compounds. Meanwhile, more compounds which contained only C, H, O, N atoms (CHON) were observed after the UV/chlorine AOP compared with dark chlorination via photolysis of organic chloramines or radical reactions. A total of 833 compounds contained C, H, O, Cl atoms (CHOCl) were observed after the UV/chlorine AOP, higher than 789 CHOCl compounds in dark chlorination, and one-chlorine-containing components were the dominant species. The different products from chlorine substitution reactions (SR) and addition reactions (AR) suggested that SR often occurred in the precursors owning higher H/C ratio and AR often occurred in the precursors owning higher aromaticity. Post-chlorination further caused the cleavages of NOM structures into small molecular weight compounds, removed CHON compounds and enhanced the formation of Cl-DBPs. The results provide information about NOM transformation and Cl-DBPs formation at molecular levels in the UV/chlorine AOP.

Transformation of diazepam in water during UV/chlorine and simulated sunlight/chlorine advanced oxidation processes

Psychoactive drug diazepam is one of benzodiazepines widely used in human medicine. It has been found to be relatively resistant to chlorination and photolysis. Here we investigated the transformation mechanism of diazepam in aqueous solution through UV/chlorine and simulated sunlight/chlorine treatments. The results showed that the UV/chlorine and sunlight/chlorine processes significantly increased the degradation of diazepam in water. These observed degradations can be elucidated by in-situ generation of reactive species including hydroxyl radical (HO), reactive chlorine species (RCS) and ozone (O₃) during photolysis of chlorine. In the UV/chlorine treatment, the degradation efficiency of diazepam for HO, chlorine, UV and RCS reaction at 90 min was calculated to be 62.1%, 3.8%, 11.9% and 12.3%, respectively. In the simulated sunlight/chlorine treatment, the calculated degradation of 53.1%, 8.1% and 11.2% was attributed to HO, chlorine and RCS reaction, with negligible loss by O₃ reaction and sunlight irradiation. In the UV/chlorine and sunlight/chlorine treatments, a total of 70 transformation products was detected using a high-resolution TripleTOF mass system. Six transformation pathways have been tentatively proposed for the diazepam, which includes hydroxylation, chlorination, hydrolyzation, N-demethylation, loss of phenyl group, benzodiazepine ring rearrangement and contraction. Most of the obtained transformation products were less toxic to aquatic organisms including fish, daphnia and green algae than diazepam itself according to the toxicity prediction tool, and did not cause significant changes in toxicity to luminescent bacteria.

Synergistic effect of UV/chlorine in bacterial inactivation, resistance gene removal, and gene conjugative transfer blocking

Antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs) were investigated from effluent of two hospital and two municipal wastewater treatment plants (WWTPs) before and after disinfection. The results of network analysis showed that 8 genera were identified to be the main potential hosts of ARGs, including Mycobacterium, Ferruginibacter, Thermomonas, Morganella, Enterococcus, Bacteroides, Myroides and Romboutsia. The removal of ARGs and their possible bacterialhosts were synchronous and consistent by chlorine or ultraviolet (UV) disinfection in WWTPs. The mechanisms of ARB and ARGs removal, and conjugation transfer of RP4 plasmids by UV, chlorine and synergistic UV/chlorine disinfection was revealed. Compared to UV alone, ARB inactivation was improved 1.4 log and photoreactivation was overcomeeffectively by UV/chlorine combination (8 mJ/cm², chlorine 2 mg/L). However, ARGs degradation was more difficult than ARB inactivation. Until UV dosage enhanced to 320 mJ/cm², ARGs achieved 0.58-1.60 log removal. Meanwhile, when 2 mg/L of chlorine was combined with UV combination, ARGs removal enhanced 1-1.5 log. The synergistic effect of adding low-dose chlorine (1-2 mg/L) during UV radiation effectively improved ARB and ARGs removal simultaneously. The same synergistic effect also occurred in the horizontal gene transfer (HGT). Non-lethal dose chlorine (0.5 mg/L) increased the conjugation transfer frequency,which confirmed that the mRNA expression levels of type IV secretion system (T4SS) proteins vir4D, vir5B and vir10B were significantly enhanced. The risk of RP4 plasmid conjugation transfer was significantly reduced with UV/chlorine (UV ≥ 4 mJ/cm², chlorine ≥ 1 mg/L). These findings may serve as valuable implications for assessing and controlling the risk of ARGs transfer and propagation in the environment.

Simultaneously enhance the inactivation and inhibit the photoreactivation of fungal spores by the combination of UV-LEDs and chlorine: Kinetics and mechanisms

Waterborne fungi have been recognized as an emerging environmental contaminant in recent years. This work was to investigate the inactivation efficiency and mechanisms of ultraviolet light-emitting diodes (UV-LEDs)/chlorine (Cl₂) (265, 280 and 265/280 nm combination) and LPUV/Cl₂ (254 nm) treatments for three fungal species compared with individual disinfection processes. Control of photoreactivation for fungal species inactivated by UV-LEDs/Cl₂ and LPUV/Cl₂ was also evaluated. The results revealed that the combined UV-LEDs/Cl₂ and LPUV/Cl₂ processes, especially UV-LEDs/Cl₂, exhibited better inactivation performance compared to UV alone and Cl₂ alone based on the inactivation rate constants, and an evident synergistic effect was observed. For example, the inactivation rates for Penicillium polonicum in the processes of UV₂₆₅/Cl₂, UV₂₈₀/Cl₂, UV_265/280/Cl₂ and LPUV/Cl₂ was 0.142, 0.168, 0.174 and 0.106 cm²/mJ, respectively, which were all approximately 1.5-fold higher than that of UV alone. The synergistic effect of fungal spores inactivation by UV-LEDs/Cl₂ and LPUV/Cl₂ was due to the high level production of intracellular reactive oxygen species and the reaction of potential extracellular free radicals. Resistance of the tested fungal spores was as follows: Trichoderma harzianum < Penicillium polonicum < Aspergillus niger. In addition, the joint effect of DNA and other cellular damage resulted in the inhibition of photoreactivation of fungal spores inactivated by UV-LEDs/Cl₂ and LPUV/Cl₂ compared with that of fungal spore inactivated by UV alone. This study may provide reference for controlling the dissemination of waterborne fungi utilizing combined UV-LEDs and free chlorine processes.

UV Inactivation of Rotavirus and Tulane Virus Targets Different Components of the Virions

Enteric viruses are shed in fecal material by humans and other animals and are common contaminants in wastewater and surface water. Wastewater treatment plants often disinfect this effluent with low-pressure and medium-pressure UV lamps, which emit 254-nm and 220- to 280-nm irradiation, respectively. It is not known whether this treatment is efficacious against enteric viruses or how such treatments may inactivate these enteric viruses. This study examined UV disinfection for two enteric viruses: rotavirus (RV) (strain OSU with double-stranded RNA and a three-layer capsid) and Tulane virus (TV) (a cultivable surrogate for human norovirus with single-stranded RNA and a single-layer capsid). Viruses were treated with UV irradiation at 220 or 254 nm under conditions relevant to wastewater stabilization ponds, whose water is often used for irrigation. TV was susceptible to 220- or 254-nm UV at similar levels. It appears that UV irradiation inactivated TV by mutagenizing both its genome and capsid binding proteins. RV was more susceptible to UV at 220 nm than to UV at 254 nm. UV irradiation of RV at either 220 or 254 nm resulted in a virus that retained its ability to bind to its host cell receptor. After 220-nm treatment, the VP7 segment of the RV genome could not be amplified by PCR, suggesting that this treatment mutagenized the viral genome. However, this correlation was not observed when UV at 254 nm was used. Thus, RV and TV, with different genome and capsid contents, are targeted by UV irradiation in different ways.IMPORTANCE UV irradiation is becoming common for disinfection in water treatment plants, but little is known about the effectiveness of this treatment for enteric RNA viruses. Here, we observed that 220-nm UV irradiation was efficacious against rotavirus (RV) and Tulane virus (TV). UV irradiation at 254 nm inactivated TV to a greater extent than RV. Additional assays showed that UV irradiation compromised different portions of the RV and TV life cycles. UV irradiation decreased the binding of TV to its host receptor and mutagenized the TV genome. UV irradiation at 220 nm appeared to allow RV-host receptor interaction but halted RV genome replication. These findings provide knowledge about the disinfection of waterborne viruses, information that is important for the safe reuse or release of treated wastewater.

Advanced treatment of urban wastewater by UV-C/free chlorine process: Micro-pollutants removal and effect of UV-C radiation on trihalomethanes formation

The effect of the UV-C/free chlorine (FC) process on the removal of contaminants of emerging concern (CECs) from real urban wastewater as well as the effect of UV-C radiation on the formation of trihalomethanes (THMs) compared to FC process alone was investigated. Unlike of FC process, UV-C/FC was really effective in the degradation of the target CECs (carbamazepine (CBZ), diclofenac, sulfamethoxazole and imidacloprid) in real wastewater (87% degradation of total CECs within 60 min, Q_UVC = 1.33 kJ L^-1), being CBZ the most refractory one (49.5%, after 60 min). The UV-C radiation significantly affected the formation of THMs. THMs concentration (mainly chloroform) was lower in UV-C/FC process after 30 min treatment (<1 μgL^-1 = limit of quantification (LOQ)) than in FC process in dark (2.3 μgL^-1). Noteworthy, while in FC treated wastewater chloroform concentration increased after treatment, UV-C/FC process resulted in a significant decrease (residual concentrations below the LOQ), even after 24 h and 48 h post-treatment incubation. The formation of radicals due to UV-C/FC process can reduce THMs compared to chlorination process, because part of FC reacts with UV-C radiation to form radicals and it is no longer available to form THMs. These results are encouraging in terms of possible use of UV-C/FC process as advanced treatment of urban wastewater even for possible effluent reuse.

Synergistic Effect of Permanganate and in Situ Synthesized Hydrated Manganese Oxide for Removing Antibiotic Resistance Genes from Wastewater Treatment Plant Effluent

An increasing amount of attention has been given to antimicrobial resistance in the environment because of its substantial threat to human health. The effluent from municipal wastewater treatment plants has been regarded as one of the important sources for the spread of antibiotic resistance genes (ARGs). However, conventional disinfection techniques fail to effectively remove ARGs from effluents. In this work, in situ synthesized hydrated manganese oxide (HMO) coupled with permanganate was applied for the first time in ARG removal from the effluent of wastewater treatment plants. The results show that five ARGs (sulI, sulII, tetQ, tetO, and tetW) as well as the intI1 and 16S rRNA genes had removal efficiencies of 2.46-4.23 logs, which were significantly higher than those obtained by using these reagents individually. This implied that there was a synergistic effect between permanganate and HMO toward the removal of ARGs. Moreover, the contributions of HMO coagulation and permanganate oxidation to ARG removal were semiquantitatively studied, which demonstrated that destruction of the microbial cells by oxidation and removal of the extracellular ARGs released by coagulation were the two main processes in this system. The results of this study provide an alternative method for ARG removal from the effluent of wastewater treatment plants with high efficiencies to control the spreading of ARGs.

Enhanced ronidazole degradation by UV-LED/chlorine compared with conventional low-pressure UV/chlorine at neutral and alkaline pH values

Ultraviolet light-emitting diodes (UV-LEDs) are promising alternatives to conventional low-pressure UV (LPUV) lamps, mainly because they contain no toxic mercury and have a potential for less energy consumption and longer lifetime. In this study, UV sources including UV-LEDs (265, 275 and 285 nm) and LPUV (254 nm) were compared in UV/chlorine degradation of an organic contaminant, ronidazole (RNZ). UV-LED/chlorine performed better than LPUV/chlorine at neutral and alkaline pH values for RNZ degradation considering the fluence-based rate constant. However, the wall plug efficiencies of UV-LEDs are relatively low at present and must reach about 20-25% to achieve the same electrical energy per order as the LPUV in UV/chlorine degradation of RNZ at pH 7.5 and 9. Neither the contribution of radical (HO· or Cl·) nor the quantum yield of chlorine could explain the different RNZ degradation rate by UV/chlorine at different wavelengths and pH values, while the chlorine photolysis rate should be the key factor for these phenomena. The effects of common co-existing substances in real water (chloride, bicarbonate and natural organic matter) on UV/chlorine degradation of RNZ were similar at different UV wavelengths. Opposite to other oxidants or reductants, the molar absorption coefficient of chlorine increases when the UV wavelength increases from 254 to 285 nm at neutral and alkaline pH, which makes UV-LED/chlorine one of the best choices for UV-LED-based advanced oxidation/reduction processes.

Moving from the traditional paradigm of pathogen inactivation to controlling antibiotic resistance in water - Role of ultraviolet irradiation

Ultraviolet (UV) irradiation has proven an effective tool for inactivating microorganisms in water. There is, however, a need to look at disinfection from a different perspective because microbial inactivation alone may not be sufficient to ensure the microbiological safety of the treated water since pathogenic genes may still be present, even after disinfection. Antibiotic resistance genes (ARGs) are of a particular concern since they enable microorganisms to become resistant to antibiotics. UV irradiation has been widely used for disinfection and more recently for destroying ARGs. While UV lamps remain the principal technology to achieve this objective, UV light emitting diodes (UV-LEDs) are novel sources of UV irradiation and have increasingly been reported in lab-scale investigations as a potential alternative. This review discusses the current state of the applications of UV technology for controlling antibiotic resistance during water and wastewater treatment. Since UV-LEDs possess several attractive advantages over conventional UV lamps, the impact of UV-LED characteristics (single vs combined wavelengths, and operational parameters such as periodic or pulsed and continuous irradiation, pulse repetition frequencies, duty cycle), type of organism, and fluence response, are critically reviewed with a view to highlighting the research needs for addressing future disinfection challenges. The energy efficiency of the reported UV processes is also evaluated with a focus on relating the findings to disinfection efficacy. The greater experience with UV lamps could be useful for investigating UV-LEDs for similar applications (i.e., antibiotic resistance control), and hence identification of future research directions.

Degradation of climbazole by UV/chlorine process: Kinetics, transformation pathway and toxicity evaluation

Climbazole is an antifungal agent widely used in household personal care products, and it was found persistent in chlorination disinfection process. Here we investigated the kinetics and mechanism of climbazole degradation by UV/chlorine process. The results showed that the UV/chlorine process dramatically enhanced degradation of climbazole when compared to the UV photolysis and chlorination alone. The neutral condition (pH 7) produced the highest reaction rate for the climbazole by UV/chlorine among the various pH conditions. Dissolved organic matter and inorganic ions in natural water showed moderate inhibition effects on the degradation of climbazole in the UV/chlorine process. Hydroxyl radical (OH and chlorine radical (Cl) were found to be the main reactive species in the degradation of climbazole, with the second-order rate constant of 1.24 × 10¹⁰ M^-1 s^-1 and 6.3 × 10¹⁰ M^-1 s^-1, respectively. In addition, the OH and Cl in the UV/chlorine at 100 μM accounted for 82.2% and 7.7% contributions to the removal of climbazole, respectively. Eleven of main transformation products of climbazole were identified in the UV/chlorine process. These oxidation products did not cause extra toxicity than climbazole itself. The findings from this study show that the combination of chlorination with UV photolysis could provide an effective approach for removal of climbazole during conventional disinfection process.

Influence of algal organic matter on MS2 bacteriophage inactivation by ultraviolet irradiation at 220 nm and 254 nm

We determined the potential interference of extracellular algal organic matter (EAOM) and intracellular algal organic matter (IAOM) extracted from Microcystis aeruginosa on MS2 bacteriophage inactivation under UV irradiation at two wavelengths (220 and 254 nm). UV irradiation at 220 nm doubled the inactivation rate of MS2 in water containing EAOM than in organic-free phosphate buffered solution. In contrast, EAOM did not change MS2 inactivation by exposure to UV 254 nm. The presence of IAOM did not significantly influence MS2 inactivation by exposure to either UV 254 or UV 220 nm. To achieve 3 log₁₀ inactivation of MS2, UV254 nm required more than double the dose of UV220 nm (45 mJ/cm² vs. 20 mJ/cm²). Linear correlations between the reduction in infectivity and the reduction in genome copies detected by reverse transcription quantitative polymerase chain reaction suggested that genomic damage is the main mechanism responsible for MS2 inactivation in water containing algal organic matter (AOM) by exposure to UV irradiation. These findings suggest that the presence of AOM did not negatively influence MS2 inactivation by either 220 or 254 nm irradiation, and that a lower UV dose of 220 nm irradiation can be used to achieve the same level of inactivation in water containing AOM.

A Review of AlGaN-Based Deep-Ultraviolet Light-Emitting Diodes on Sapphire

This paper reviews the progress of AlGaN-based deep-ultraviolet (DUV) light emitting diodes (LEDs), mainly focusing in the work of the authors’ group. The background to the development of the current device structure on sapphire is described and the reason for using a (0001) sapphire with a miscut angle of 1.0° relative to the m-axis is clarified. Our LEDs incorporate uneven quantum wells (QWs) grown on an AlN template with dense macrosteps. Due to the low threading dislocation density of AlGaN and AlN templates of about 5 × 108/cm2, the number of nonradiative recombination centers is decreased. In addition, the uneven QW show high external quantum efficiency (EQE) and wall-plug efficiency, which are considered to be boosted by the increased internal quantum efficiency (IQE) by enhancing carrier localization adjacent to macrosteps. The achieved LED performance is considered to be sufficient for practical applications. The advantage of the uneven QW is discussed in terms of the EQE and IQE. A DUV-LED die with an output of over 100 mW at 280–300 nm is considered feasible by applying techniques including the encapsulation. In addition, the fundamental achievements of various groups are reviewed for the future improvements of AlGaN-based DUV-LEDs. Finally, the applications of DUV-LEDs are described from an industrial viewpoint. The demonstrations of W/cm2-class irradiation modules are shown for UV curing.

Mechanistic Insight into the Reactivity of Chlorine-Derived Radicals in the Aqueous-Phase UV-Chlorine Advanced Oxidation Process: Quantum Mechanical Calculations

The combined ultraviolet (UV) and free chlorine (UV-chlorine) advanced oxidation process that produces highly reactive hydroxyl radicals (HO^•) and chlorine radicals (Cl^•) is an attractive alternative to UV alone or chlorination for disinfection because of the destruction of a wide variety of organic compounds. However, concerns about the potential formation of chlorinated transformation products require an understanding of the radical-induced elementary reaction mechanisms and their reaction-rate constants. While many studies have revealed the reactivity of oxygenated radicals, the reaction mechanisms of chlorine-derived radicals have not been elucidated due to the data scarcity and discrepancies among experimental observations. We found a linear free-energy relationship quantum mechanically calculated free energies of reaction and the literature-reported experimentally measured reaction rate constants, k_exp, for 22 chlorine-derived inorganic radical reactions in the UV-chlorine process. This relationship highlights the discrepancy among literature-reported rate constants and aids in the determination of the rate constant using quantum mechanical calculations. We also found linear correlations between the theoretically calculated free energies of activation and k_exp for 31 reactions of Cl^• with organic compounds. The correlation suggests that H-abstraction and Cl-adduct formation are the major reaction mechanisms. This is the first comprehensive study on chlorine-derived radical reactions, and it provides mechanistic insight into the reaction mechanisms for the development of an elementary reaction-based kinetic model.