Method for Extraction and Quantification of Metal-Based Nanoparticles in Biological Media: Number-Based Biodistribution and Bioconcentration

Co-exposure of TMPs and antibiotics in zebrafish: The influence of additives on the risk of hepatotoxicity

Co-exposure of tire microplastics (TMPs) and antibiotics has been confirmed to pose toxic risks to aquatic organisms. However, the contributions of TMP additives to these risks and the underlying mechanisms remain underreported. In this study, factor analysis and molecular docking and molecular dynamics simulations were employed to investigate the differential additive-related hepatotoxicity risks associated with TMP-antibiotic exposure in zebrafish. The differential hepatotoxicity risks of five types of TMPs and six antibiotics were simulated in the presence of additives. Zebrafish exposed to different TMPs showed significant differences in hepatotoxicity risks, with styrene-butadiene rubber (SBR) exhibiting the most pronounced toxic effects. The additive contribution analysis revealed that in the presence of SBR additives, TMPs-antibiotics posed higher toxicity risks to the cytochrome P 17A2 (CYP17A2) isoenzymes CYP2K19, CYP1A, CYP3A65, and CYP2K22 in zebrafish, showing synergistic effects primarily driven by plasticizers. Furthermore, the hepatotoxicity risks of TMPs-antibiotics in zebrafish in the presence of additives were significantly mitigated by the selection of alternative plasticizers. The micromechanisms by which additives affected the TMP-antibiotic hepatotoxicity risks in zebrafish were elucidated through mechanistic analysis. This study aimed to characterize the additive-influenced hepatotoxicity risks of TMPs-antibiotics, providing micro-level insights and theoretical support for ecological risk assessments in aquatic environments.

Bioavailability and translocation of platinum nanoparticles and platinum ions in rice (Oryza sativa L.): Nanoparticles biosynthesis and size-dependent transformation

Metal nanoparticles accumulation and bioavailability in plants raised much attention, specifically transformation and transportation of nanoparticles and their corresponding ions in plants are still unknown. In this work, rice seedlings were exposed to platinum nanoparticles (PtNPs) (with three sizes of 25, 50, and 70 nm) and Pt ions (with doses of 1, 2, and 5 mg/L) to investigate the influences of particle size and Pt form on bioavailability and translocation mechanism of metal nanoparticles. Results based on single particle ICP-MS (SP-ICP-MS) demonstrated the biosynthesis of PtNPs in Pt ions treated rice seedlings. The particle size ranges at 75-79.3 nm were detected in Pt ions exposed rice roots, and further migrated up to rice shoots at 21.7-44.3 nm. After exposed to PtNP-25, the particles could transfer to shoots with the original size distribution detected in roots, even with the PtNPs dose change. PtNP-50 and PtNP-70 translocated to shoots with the particle size increase. For the rice exposure with three dose levels, PtNP-70 had the highest number-based bioconcentration factors (NBCFs) in all Pt species, while Pt ions had the highest bioconcentration factors (BCFs), a range of 1.43-2.04. All PtNPs and Pt ions could be accumulated in rice plants and further transferred to shoots, and particle biosynthesis was proved through SP-ICP-MS. The finding could help us better understand the influence of particle size and form on the transformations of PtNPs in environment.

Trophic transfer of nanomaterials and their effects on high-trophic-level predators

Nanotechnology offers great opportunities for numerous sectors in society. One important challenge in sustainable nanotechnology is the potential of trophic transfer of nanomaterials (NMs), which may lead to unintentional impacts on environmental and human health. Here, we highlight the key advances that have been made in recent 15 years with respect to trophic transfer of heterogeneous NMs, including metal-based NMs, carbon-based NMs and nanoplastics, across various aquatic and terrestrial food chains. Particle number-based trophic transfer factors (TTFs), rather than the variable mass-based TTFs, capture the particle-specific transfer, for which NMs exhibit dynamic and complex biotransformation (e.g., dissolution, sulfidation, reduction, and corona formation). Trophic transfer of NMs has toxicological significance to predators at molecular (e.g., increased oxidative stress and modified metabolites), physiological (e.g., feeding inhibition) and population (e.g., reproduction inhibition) levels. However, linking NM exposure and toxicity remains a challenge, partly due to the dynamic biotransformation along the food chain. Although NMs have been used to increase crop yield in agriculture, they can exert detrimental impacts on crop yield and modify crop quality, depending on NMs type, exposure dose, and crop species, with unknown consequences to human health via crop consumption. Given this information, we describe the challenges and opportunities in understanding the significance of NMs trophic transfer to develop more sustainable, effective and safer nanotechnology.

Toxicokinetics and Particle Number-Based Trophic Transfer of a Metallic Nanoparticle Mixture in a Terrestrial Food Chain

Herein, we investigated to which extent metallic nanoparticles (MNPs) affect the trophic transfer of other coexisting MNPs from lettuce to terrestrial snails and the associated tissue-specific distribution using toxicokinetic (TK) modeling and single-particle inductively coupled plasma mass spectrometry. During a period of 22 days, snails were fed with lettuce leaves that were root exposed to AgNO3 (0.05 mg/L), AgNPs (0.75 mg/L), TiO2NPs (200 mg/L), and a mixture of AgNPs and TiO2NPs (equivalent doses as for single NPs). The uptake rate constants (ku) were 0.08 and 0.11 kg leaves/kg snail/d for Ag and 1.63 and 1.79 kg leaves/kg snail/d for Ti in snails fed with NPs single- and mixture-exposed lettuce, respectively. The elimination rate constants (ke) of Ag in snails exposed to single AgNPs and mixed AgNPs were comparable to the corresponding ku, while the ke for Ti were lower than the corresponding ku. As a result, single TiO2NP treatments as well as exposure to mixtures containing TiO2NPs induced significant biomagnification from lettuce to snails with kinetic trophic transfer factors (TTFk) of 7.99 and 6.46. The TTFk of Ag in the single AgNPs treatment (1.15 kg leaves/kg snail) was significantly greater than the TTFk in the mixture treatment (0.85 kg leaves/kg snail), while the fraction of Ag remaining in the body of snails after AgNPs exposure (36%) was lower than the Ag fraction remaining after mixture exposure (50%). These results indicated that the presence of TiO2NPs inhibited the trophic transfer of AgNPs from lettuce to snails but enhanced the retention of AgNPs in snails. Biomagnification of AgNPs from lettuce to snails was observed in an AgNPs single treatment using AgNPs number as the dose metric, which was reflected by the particle number-based TTFs of AgNPs in snails (1.67, i.e., higher than 1). The size distribution of AgNPs was shifted across the lettuce-snail food chain. By making use of particle-specific measurements and fitting TK processes, this research provides important implications for potential risks associated with the trophic transfer of MNP mixtures.

Considerations for bioaccumulation studies in fish with nanomaterials

Nanomaterials (NMs) pose challenges in performing bioaccumulation studies in fish and in regulatory interpretation of results. Therefore, a clear guidance is needed to obtain reliable, reproducible and comparable results. By analysing all the available literature, we aim in this manuscript to identify the critical aspects that should be addressed in these type of studies. Seventy-eight studies from a total of 67 published articles were identified in which a variety of approaches were used: aqueous exposure (49 studies), dietary exposure (19), and pre-exposed animals for trophic transfer studies (10). The NMs tested included TiO₂, Zn, ZnO, Cu, CuO, Ag, Au, CeO₂, Fe₂O₃, Fe₃O₄, Se, CdS, CdSe/ZnS-QDs, CdTe/ZnS-QDs, graphene, fullerenol and MWCNTs. In general, there is a scarcity of bioaccumulation studies for the different NMs. In particular, studies that use the dietary exposure route are lacking. TiO₂ NMs are the most studied for bioaccumulation potential in fish (20%), whereas very few data were available for CuO, FeO and carbon-based NMs. Different information gaps were identified in these studies that hamper overall conclusions to be made on the bioaccumulation potential of NMs. The main critical issues related to NM testing for bioaccumulation include: maintenance of stable exposure concentrations, the influence of feeding regimen on uptake and elimination, the use of appropriate feed spiking methodologies, the potential need for testing different concentrations, and the reporting of bioaccumulation endpoints (BCF/BMF). Each of these issues needs further guidance to allow proper use and reporting of NM bioaccumulation data for regulatory purposes.

Bioaccumulation of CuO nanomaterials in rainbow trout: Influence of exposure route and particle shape

The bioaccumulation potential of spherical and rod-shaped CuO nanomaterials (NMs) was assessed in rainbow trout (Oncorhynchus mykiss) exposed via water and diet following the OECD Test Guideline No. 305. Fish were exposed via diet to both NMs at concentrations of 70 and 500 mg Cu/kg for 15 days, followed by 44 days of depuration. For water-borne exposure, only the rod-shaped CuO NMs were tested at 0.08 and 0.8 mg Cu/L for 28 days, followed by 14 days of depuration. The concentration of Cu was determined in fish whole body to derive biomagnification and bioconcentration factors (BMF and BCF). Different tissues were sampled to investigate the total Cu biodistribution and target organs as well as the particle number-based bioaccumulation of CuO NMs. Estimated BMF and BCF values were below the thresholds of concern. However, shape and route influenced depuration. Following dietary exposure, there was a higher depuration of Cu from fish exposed to the rod-shaped compared to the spherical CuO NMs. A higher depuration was also observed for rod-shaped CuO NMs following the dietary exposure compared the aqueous one. Despite the much higher dietary exposure concentrations of rod-shape CuO NMs, similar Cu body burdens were reached via water. Cu was found in particulate form in different tissues. Although these NMs had a low bioaccumulation potential, differences in distribution and elimination patterns of Cu were observed depending on the exposure route and particle shape. Careful consideration of the most relevant exposure route is needed when designing a bioaccumulation experiment for testing NMs.

Extraction and quantification of polystyrene nanoplastics from biological samples

Accurate quantification of nanoplastics (NPs) in complex matrices remains a challenge, especially for biological samples containing high content of organic matters. Herein, a new method extracting and quantifying polystyrene (PS) NPs from biological samples was developed. The extraction included alkaline digestion, centrifugation, and cloud point extraction (CPE), and the quantification included gold nanoparticles formation and labeling on surfaces of the extracted NPs and thereafter measurement with single particle inductively coupled plasma mass spectrometry (SP-ICP-MS). Results show that 25% tetramethylammonium hydroxide solution was an effective alkaline digestion solution for biological matrices, and CPE after centrifugation (3000 rpm, 10 min) was applicable to purify and enrich PS NPs with different sizes (100 and 500 nm) and surface functionalities (-COOH and -NH₂ modifications) from the digestion solution. The efficiency of Au labeling on PS NPs surface was improved by about 70% in the presence of 100 μM cetyltrimethylammonium bromide. The performance of the quantification method was examined by extraction and measurement of PS NPs spiked in four representative organism samples including bacteria, algae, nematode, and earthworm, and was further validated by analyzing the accumulated PS NPs in exposed nematodes. Good recovery rates (65 ± 10%-122 ± 22%) were achieved for spiking levels of 5-50 μg g^-1; the limit of detection was 3.7 × 10⁷ particles g^-1, corresponding to the mass concentration of about 0.02 and 2.5 μg g^-1 for the 100 nm and 500 nm PS NPs, respectively. The established extraction and quantification methods are efficient and sensitive, providing a useful approach for further exploring the environmental behavior and toxicity of NPs.

Trophic transfer of Cu nanoparticles in a simulated aquatic food chain

The goal of the current study was to quantify the trophic transfer of copper nanoparticles (CuNPs) in a food chain consisting of the microalga Pseudokirchneriella subcapitata as the representative of primary producer, the grazer Daphnia magna, and the omnivorous mysid Limnomysis benedeni. To quantify the size and number concentration of CuNPs in the biota, tissue extraction with tetramethylammonium hydroxide (TMAH) was performed and quantification was done by single particle inductively coupled plasma mass spectrometry (sp-ICP-MS). The bioconcentration factor (BCF) of the test species for CuNPs varied between 10² - 10³ L/kg dry weight when expressing the internal concentration on a mass basis, which was lower than BCF values reported for Cu²⁺ (10³ - 10⁴ L/kg dry weight). The particle size of CuNPs determined by sp-ICP-MS ranged from 22 to 40 nm in the species. No significant changes in the particle size were measured throughout the food chain. Moreover, the measured number of CuNPs in each trophic level was in the order of 10¹³ particles/kg wet weight. The calculated trophic transfer factor (mass concentration basis) was > 1. This indicates biomagnification of particulate Cu from P. subcapitata to L. benedeni. It was also found that the uptake of particulate Cu (based on the particle number concentration) was mainly from the dietary route rather than from direct aqueous exposure. Furthermore, dietary exposure to CuNPs had a significant effect on the feeding rate of mysid during their transfer from daphnia to mysid and from alga through daphnia to mysid. This work emphasizes the importance of tracing the particulate fraction of metal-based engineered nanoparticles when studying their uptake and trophic transfer.

How to trust size distributions obtained by single particle inductively coupled plasma mass spectrometry analysis

Single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) is a technique widely used to obtain direct information about the number concentration and the size distribution of nanoparticles in liquid suspensions. However, its methods still lack clear quality control strategies to confirm the validity of the information derived from them. Only the detection of the complete size distribution of the nanoparticles in a sample over the size critical value ensures obtaining unbiased quantitative information, otherwise information should be restricted to report the presence of nanoparticles over a certain size and number concentration since their actual total number concentration is underestimated and the size overestimated. Under the latter conditions, data processing produces histograms showing the tails of the incomplete size distributions, although apparently, complete distributions can also be obtained when particle events are recorded as peaks, as reported here for the first time. The occurrence of these misleading situations must be critically evaluated for each SP-ICP-MS analysis. An approach, based on estimation of size critical values and successive dilutions, is proposed for the assessment of the validity of the quantitative information obtained, together with specific criteria for reconsidering the information that can be derived from those measurements. The approach was verified with different case studies and applied to the analysis of complex nanomaterials, confirming the validity of the reported information by comparison with other techniques. A calculation tool is also included to facilitate the estimation of size critical values under experimental conditions.

Analytical Methods for Nanomaterial Determination in Biological Matrices

Nanomaterials are materials in which at least one of the three dimensions ranges from 1 to 100 nm, according to the International Organization for Standardization (ISO). Nanomaterials can be categorized according to various parameters, such as their source, their shape, and their origin. Their increasing use in industrial settings, everyday items, electronic devices, etc. poses an environmental and biological risk that needs to be assessed and appropriately addressed. The development of reliable analytical methods for both characterization and quantification of nanomaterials in various matrices is essential. This review summarized the recent trends in analytical methodologies for the characterization and determination of nanoparticles in biological matrices.

An analytical workflow for dynamic characterization and quantification of metal-bearing nanomaterials in biological matrices

To assess the safety of engineered nanomaterials (ENMs) and to evaluate and improve ENMs' targeting ability for medical application, it is necessary to analyze the fate of these materials in biological media. This protocol presents a workflow that allows researchers to determine, characterize and quantify metal-bearing ENMs (M-ENMs) in biological tissues and cells and quantify their dynamic behavior at trace-level concentrations. Sample preparation methods to enable analysis of M-ENMs in a single cell, a cell layer, tissue, organ and physiological media (e.g., blood, gut content, hemolymph) of different (micro)organisms, e.g., bacteria, animals and plants are presented. The samples are then evaluated using fit-for-purpose analytical techniques e.g., single-cell inductively coupled plasma mass spectrometry, single-particle inductively coupled plasma mass spectrometry and synchrotron X-ray absorption fine structure, providing a protocol that allows comprehensive characterization and quantification of M-ENMs in biological matrices. Unlike previous methods, the protocol uses no fluorescent dyes or radiolabels to trace M-ENMs in biota and enables analysis of most M-ENMs at cellular, tissue and organism levels. The protocols can be applied by a wide variety of users depending on the intended purpose of the application, e.g., to correlate toxicity with a specific particle form, or to understand the absorption, distribution and excretion of M-ENMs. The results facilitate an understanding of the biological fate of M-ENMs and their dynamic behavior in biota. Performing the protocol may take 7-30 d, depending on which combination of methods is applied.

Current Methods and Prospects for Analysis and Characterization of Nanomaterials in the Environment

Analysis and characterization of naturally occurring and engineered nanomaterials in the environment are critical for understanding their environmental behaviors and defining real exposure scenarios for environmental risk assessment. However, this is challenging primarily due to the low concentration, structural heterogeneity, and dynamic transformation of nanomaterials in complex environmental matrices. In this critical review, we first summarize sample pretreatment methods developed for separation and preconcentration of nanomaterials from environmental samples, including natural waters, wastewater, soils, sediments, and biological media. Then, we review the state-of-the-art microscopic, spectroscopic, mass spectrometric, electrochemical, and size-fractionation methods for determination of mass and number abundance, as well as the morphological, compositional, and structural properties of nanomaterials, with discussion on their advantages and limitations. Despite recent advances in detecting and characterizing nanomaterials in the environment, challenges remain to improve the analytical sensitivity and resolution and to expand the method applications. It is important to develop methods for simultaneous determination of multifaceted nanomaterial properties for in situ analysis and characterization of nanomaterials under dynamic environmental conditions and for detection of nanoscale contaminants of emerging concern (e.g., nanoplastics and biological nanoparticles), which will greatly facilitate the standardization of nanomaterial analysis and characterization methods for environmental samples.

Bioaccumulation and depuration of TiO2 nanoparticles by zebrafish through dietary exposure: Size- and number concentration-resolved analysis using single-particle ICP-MS

The bioaccumulation and depuration of TiO₂ nanoparticles (TiO₂NPs) by zebrafish via the dietary exposure following the OECD Test Guideline 305 (OECD TG305) was evaluated using particle size- and number concentration-resolved analysis based on single-particle ICP-MS (spICP-MS). We found that using enzymatic digestion without H₂O₂ or excessive heating can recover 84.0 ± 4.0% and 94.5 ± 3.5% of TiO₂NP mass and number concentrations from fish tissue, respectively, without altering the size distribution of parent TiO₂NPs. OECD TG305 can allow for the evaluation of bioaccumulation and depuration of TiO₂NPs by fish based on the particle mass and number dose metrics. The toxicokinetic modeling can reasonably describe the mass- and number-based measurement data with the derived absorption efficiency α at ~0.2, depuration rate at ~0.5 d^-1, and kinetic biomagnification factor (BMF_k) at ~0.007 comparable with available data. The mass concentration- and number concentration-based bioaccumulation metrics including body burdens are correlated for TiO₂NPs that remained nano-sized in vivo and exhibited marginal physicochemical alterations upon uptake by fish. The result indicates that the traditional mass concentration metric may be used to represent the fish bioaccumulation potential for chemically inert NPs like TiO₂.

Determination of metallic nanoparticles in biological samples by single particle ICP-MS: a systematic review from sample collection to analysis

A systematic review of the use of single particle ICP-MS to analyse engineered nanomaterials (ENMs) in biological samples (plants, animals, body fluids) has highlighted that efforts have focused on a select few types of ENMs (e.g., Ag and TiO₂) and there is a lack of information for some important tissues (e.g., reproductive organs, skin and fatty endocrine organs). The importance of sample storage is often overlooked but plays a critical role. Careful consideration of the ENM and matrix composition is required to select an appropriate protocol to liberate ENMs from a tissue whilst not promoting the transformation of them, or genesis of new particulates. A 'one size fits all' protocol, applicable to all possible types of ENM and biological matrices, does not seem practical. However, alkaline-based extractions would appear to show greater promise for wide applicability to animal tissues, although enzymatic approaches have a role, especially for plant tissues. There is a lack of consistency in metrics reported and how they are determined (e.g. size limit of detection, and proportions of recovery), making comparison between some studies more difficult. In order to establish standardised protocols for regulatory use, effort is needed to: develop certified reference materials, achieve international agree on nomenclature and the use of control samples, and to create a decision tree to help select the best sample preparation for the type of tissue matrix.

High-efficiency mechanically assisted alkaline extraction of nanoparticles from biological tissues for spICP-MS analysis

The widespread use and increased exposure of nanoparticles call for technology to quantify their concentration and size distribution in biological matrices. As ex situ evaluation, facile extraction with high fidelity and efficiency is critical. In this work, single particle inductively coupled plasma mass spectrometry (spICP-MS) was used for nanoparticle number and distribution analysis, where a facile and highly efficient mechanically assisted alkaline digestion has been developed to extract nanoparticles at low alkali concentration. The optimization was performed using chicken tissues in vitro mixed with 30 nm gold nanoparticles, mixture of 30 nm and 60 nm gold nanoparticles, and 45 nm silver nanoparticles, respectively, which is, then, mechanically ground to form tissue homogenate and 2% TMAH is added. The nanoparticles are extracted with a recovery of more than 94% for all the spiked nanoparticle tissue samples. The extraction method has also been attempted to be applied to extract single-sized gold nanoparticles from various organs of mice mixed in vivo with the nanoparticles through intravenous injection, and led to consistent results with acid digestion. Mice injected intravenously with double-sized gold nanoparticle mixture were also studied, further showing that gold nanoparticles of 30 nm and 60 nm have no significant difference in their biodistribution in the same organ. To the best of our knowledge, this is the first attempt for multiple nanoparticles being extracted simultaneously and measured quantitatively from various organs, such as the heart, liver, spleen, lungs, and kidneys. We believe this method is beneficial to the safety assessment and toxicokinetics studies for nanoparticles in tissues.

Extraction and quantification of metal-containing nanoparticles in marine shellfish based on single particle inductively coupled plasma-mass spectrometry technique

Quantitative characterization of nanoparticles (NPs) in marine shellfish is critical to understanding the risks of bio-accumulation. Based on single particle (sp)ICP-MS and electron microscopy, a standardized protocol was developed to extract Ag, Au, and indigenous Ti-containing NPs from mussels. The optimal parameters are: dry sample extraction with tetramethylammonium hydroxide (TMAH), 5% (v/v) final concentration of TMAH, extraction at 25 ℃ for 12 h, and separation by centrifugation (3000 rpm for 5 min). The particle number recoveries of spiked Ag and Au NPs were 88 ± 0.9% and 95 ± 1.1%, respectively, while Ti-containing NPs had a particle number concentration of 8.2 × 10⁶ particles/mg and an average size of 70 nm in tested mussels. Furthermore, titanium oxide NPs, including rutile, anatase, and Magnéli phases (Ti_xO_2x-1) were found ubiquitously in 10 shellfish based on the optimal method. The particle number concentrations and average sizes of the Ti-containing NPs were 2.1 × 10⁶-8.4 × 10⁶ particles/mg and 70-80 nm, respectively. These Ti-containing NPs, such as TiO₂, accounted for about half of the Ti mass in shellfish, indicating that marine shellfish may be a significant sink for Ti-containing NPs.

An integrated ICP-MS-based analytical approach to fractionate and characterize ionic and nanoparticulate Ce species

Cerium dioxide nanoparticles (CeO₂ NPs) are widely used in various fields, leading to concern about their effect on human health. When conducting in vivo investigations of CeO₂ NPs, the challenge is to fractionate ionic Ce and CeO₂ NPs and to characterize CeO₂ NPs without changing their properties/state. To meet this challenge, we developed an integrated inductively coupled plasma-mass spectrometry (ICP-MS)-based analytical approach in which ultrafiltration is used to fractionate ionic and nanoparticulate Ce species while CeO₂ NPs are characterized by single particle-ICP-MS (sp-ICP-MS). We used this technique to compare the effects of two sample pretreatment methods, alkaline and enzymatic pretreatments, on ionic Ce and CeO₂ NPs. Results showed that enzymatic pretreatment was more efficient in extracting ionic Ce or CeO₂ NPs from animal tissues. Moreover, results further showed that the properties/states of all ionic and nanoparticulate Ce species were well preserved. The rates of recovery of both species were over 85%; the size distribution of CeO₂ NPs was comparable to that of original NPs. We then applied this analytical approach, including the enzymatic pretreatment and ICP-MS-based analytical techniques, to investigate the bioaccumulation and biotransformation of CeO₂ NPs in mice. It was found that the thymus acts as a "holding station" in CeO₂ NP translocation in vivo. CeO₂ NP biotransformation was reported to be organ-specific. This is the first study to evaluate the impact of enzymatic and alkaline pretreatment on Ce species, namely ionic Ce and CeO₂ NPs. This integrated ICP-MS-based analytical approach enables us to conduct in vivo biotransformation investigations of CeO₂ NPs.

Occurrence of Silver-containing Particles in Rat Brains upon Intranasal Exposure of Silver Nanoparticles

The widespread application of silver nanomaterials raises health concerns due to the adverse effects that can be associated with silver nanoparticles (AgNPs) exposure. AgNPs can be introduced into human bodies via inhalation, either intentionally (intranasal administration of AgNPs) or unintentionally (environmental pollution, accidental release, or occupational exposure). Recent studies have shown that intranasal exposure of experimental animals to AgNPs can lead to the accumulation of silver (Ag) in brain tissues. However, there is little information available concerning what forms of Ag (particulate and ionic) exist in brain tissues. This study aimed to investigate whether particulate Ag exists in rat brains following intranasal exposure of AgNPs at 1 mg/kg/day using multiple analytical techniques. The results demonstrated that Ag-containing particles were presented in AgNPs-exposed rat brains, accounting for 20.2%- 68.1% of the total Ag. The mass concentrations of Ag-containing particles in brain tissues increased with exposure time but only decreased by 37.5% after elimination for 4 weeks upon exposure cessation. The size of Ag-containing particles identified in rat brains was larger than the original AgNPs. The Ag-containing particles identified in the rat brain were composed of multiple elements, including Ag, sulfur (S), selenium (Se) with atomic percentages of 45.8%, 37.5%, 16.7% respectively. The finding highlighted the occurrence and accumulation of transformed AgNPs containing S and Se in rat brains after intranasal exposure to AgNPs, implying potential risks for brain health.

Biotransformation modulates the penetration of metallic nanomaterials across an artificial blood-brain barrier model

Although the brain is protected by a tight physiological guardian named the blood–brain barrier (BBB), deposition of engineered nanomaterials (ENMs) in the brain and consequent neurotoxicity has been reported. To date, it is still unclear whether and how ENMs enter the brain by crossing the BBB. In this study, we found that metallic ENMs transform in the BBB as affected by their shape, size, and intrinsic solubility, which in turn modulates their transport form, efficiency, and pathways through the BBB and, consequently, their neurotoxicity. The library of quantitative data on the chemical transformations presented here will support in silico modeling and prediction of the neurotoxicity of NMs and facilitate the tailored design of safe NMs.

Understanding the potential of nanomaterials (NMs) to cross the blood–brain barrier (BBB), as a function of their physicochemical properties and subsequent behavior, fate, and adverse effect beyond that point, is vital for evaluating the neurological effects arising from their unintentional entry into the brain, which is yet to be fully explored. This is not only due to the complex nature of the brain but also the existing analytical limitations for characterization and quantification of NMs in the complex brain environment. By using a fit-for-purpose analytical workflow and an in vitro BBB model, we show that the physiochemical properties of metallic NMs influence their biotransformation in biological matrices, which in turn modulates the transport form, efficiency, amounts, and pathways of NMs through the BBB and, consequently, their neurotoxicity. The data presented here will support in silico modeling and prediction of the neurotoxicity of NMs and facilitate the tailored design of safe NMs.

Quantitative Analysis of Polystyrene and Poly(methyl methacrylate) Nanoplastics in Tissues of Aquatic Animals

Micro- and nanoplastics unavoidably enter into organisms and humans as a result of widespread exposures through drinking waters, foods, and even inhalation. However, owing to the limited availability of quantitative analytical methods, the effect of nanoplastics inside animal bodies is poorly understood. Herein, we report a sensitive and robust method to determine the chemical composition, mass concentration, and size distribution of nanoplastics in biological matrices. This breakthrough is based on a novel procedure including alkaline digestion and protein precipitation to extract nanoplastics from tissues of aquatic animals, followed by quantitative analysis with pyrolysis gas chromatography-mass spectrometry. The optimized procedure exhibited good reproducibility and high sensitivity with the respective detection limits of 0.03 μg/g for polystyrene (PS) nanoplastics and 0.09 μg/g poly(methyl methacrylate) (PMMA) nanoplastics. This method also preserved the original morphology and size of nanoplastics. Furthermore, to demonstrate the feasibility of the proposed method, 14 species of aquatic animals were collected, and PS nanoplastics in a concentration range of 0.093-0.785 μg/g were detected in three of these animals. Recovery rates of 73.0-89.1% were further obtained for PS and PMMA nanospheres when they were spiked into the tissues of Zebra snail and Corbicula fluminea at levels of 1.84-2.12 μg/g. Consequently, this method provides a powerful tool for tracking nanoplastics in animals.

Particle number-based trophic transfer of gold nanomaterials in an aquatic food chain

Analytical limitations considerably hinder our understanding of the impacts of the physicochemical properties of nanomaterials (NMs) on their biological fate in organisms. Here, using a fit-for-purpose analytical workflow, including dosing and emerging analytical techniques, NMs present in organisms are characterized and quantified across an aquatic food chain. The size and shape of gold (Au)-NMs are shown to control the number of Au-NMs attached to algae that were exposed to an equal initial concentration of 2.9 × 10¹¹ particles mL^-1. The Au-NMs undergo size/shape-dependent dissolution and agglomeration in the gut of the daphnids, which determines the size distribution of the NMs accumulated in fish. The biodistribution of NMs in fish tissues (intestine, liver, gills, and brain) also depends on NM size and shape, although the highest particle numbers per unit of mass are almost always present in the fish brain. The findings emphasize the importance of physicochemical properties of metallic NMs in their biotransformations and tropic transfers.

Accumulation of metal-based nanoparticles in marine bivalve mollusks from offshore aquaculture as detected by single particle ICP-MS

The exposure risk of metal-based nanoparticles (NPs) to marine organisms and related food safety have attracted increasing attention, but the actual concentrations of these NPs in seawater and marine organisms are unknown. In this work, single particle inductively coupled plasma-mass spectrometry (spICP-MS) was used to quantify the concentrations and size distributions of NPs in different marine mollusks (oysters, mussels, scallops, clams, and ark shells) from an offshore aquaculture farm. Results showed that Ti, Cu, Zn, and Ag bearing NPs were detected in all the five mollusks with the mean sizes at 65.4-70.9, 72.2-89.6, 97.8-108.3, and 42.9-51.0 nm, respectively. The particle concentrations of Ti, Cu, Zn, and Ag bearing NPs in all mollusks (0.88-3.26 × 10⁷ particles/g fresh weight) were much higher than that in the seawater (0.46-0.79 × 10⁷ particles/mL), suggesting bio-accumulation of NPs. For all the five mollusks, Ag bearing NPs had the highest number-based bioconcentration factors (NBCFs) in all the tested NPs due to the smallest mean size of Ag bearing NPs in seawater (30.5 nm). In addition, the clams exhibited the lowest NBCFs of the four NPs than other mollusks. All four NPs were mainly accumulated in the gill and digestive gland, and could transfer to adductor muscle of all mollusks. Although all the four metals (Ti, Cu, Zn, Ag) in mollusks were safe for human consumption by the estimated daily intake (EDI) analysis, the risk of NPs remaining in the mollusks should be further considered when evaluating the toxicity of metals for human health. The findings could improve our understanding on the distribution and health risk of NPs in marine mollusks under offshore aquaculture.

Impact of in vitro digestion on gastrointestinal fate and uptake of silver nanoparticles with different surface modifications

Nanomaterials, especially silver nanoparticles (AgNPs), are used in a broad range of products owing to their antimicrobial potential. Oral ingestion is considered as a main exposure route to AgNPs. This study aimed to investigate the impact of the biochemical conditions within the human digestive tract on the intestinal fate of AgNPs across an intestinal in vitro model of differentiated Caco-2/HT29-MTX cells. The co-culture model was exposed to different concentrations (250-2500 µg/L) of pristine and in vitro digested (IVD) AgNPs and silver nitrate for 24 h. ICP-MS and spICP-MS measurements were performed for quantification of total Ag and AgNPs. The AgNPs size distribution, dissolution, and particle concentration (mass- and number-based) were characterized in the cell fraction and in the apical and basolateral compartments of the monolayer cultures. A significant fraction of the AgNPs dissolved (86-92% and 48-70%) during the digestion. Cellular exposure to increasing concentrations of pristine or IVD AgNPs resulted in a concentration dependent increase of total Ag and AgNPs content in the cellular fractions. The cellular concentrations were significantly lower following exposure to IVD AgNPs compared to the pristine AgNPs. Transport of silver as either total Ag or AgNPs was limited (<0.1%) following exposure to pristine and IVD AgNPs. We conclude that the surface chemistry of AgNPs and their digestion influence their dissolution properties, uptake/association with the Caco-2/HT29-MTX monolayer. This highlights the need to take in vitro digestion into account when studying nanoparticle toxicokinetics and toxicodynamics in cellular in vitro model systems.

Dissolved Organic Matter Modulates Algal Oxidative Stress and Membrane System Responses to Binary Mixtures of Nano-Metal-Oxides (nCeO2, nMgO and nFe3O4) and Sulfadiazine

Joint biomarker responses, oxidative stress and membrane systems, were determined for nano-metal-oxides (nMeO, i.e., nCeO₂, nMgO, and nFe₃O₄) and sulfadiazine (SDZ) exposed at relevant low concentrations to two freshwater microalgae Scenedesmus obliquus and Chlorella pyrenoidosa. The impacts of dissolved organic matter (DOM) on the joint biomarker responses were also investigated. Results indicated that the presence of SDZ significantly decreased the level of intercellular reactive oxygen species (ROS) in the algal cells exposed to each nMeO. Reduction of cell membrane permeability (CMP) and mitochondrial membrane potential (MMP) in the algal cells was observed when the algae were exposed to the mixture of SDZ and the nMeO. The degree of reduction of the ROS level, CMP, and MMP significantly went down with the addition of DOM to a certain extent. Changes in cellular oxidative stress and membrane function depended on the types of both nMeO and algal species. This contribution provides an insight into the hazard assessment of a mixture consisting of emerging contaminants and DOM, as they can coexist in the aquatic environment.