Facet-Specific Photocatalytic Degradation of Organics by Heterogeneous Fenton Chemistry on Hematite Nanoparticles

Insights into the Crystallinity-Dependent Photochemical Productions of Reactive Oxygen Species from Iron Minerals

Iron minerals are widespread in earth's surface water and soil. Recent studies have revealed that under sunlight irradiation, iron minerals are photoactive on producing reactive oxygen species (ROS), a group of key species in regulating elemental cycling, microbe inactivation, and pollutant degradation. In nature, iron minerals exhibit varying crystallinity under different hydrogeological conditions. While crystallinity is a known key parameter determining the overall activity of iron minerals, the impact of iron mineral crystallinity on photochemical ROS production remains unknown. Here, we assessed the photochemical ROS production from ferrihydrites with different degrees of crystallinity. All examined ferrihydrites demonstrated photoactivity under irradiation, resulting in the generation of hydrogen peroxide (H2O2) and hydroxyl radical (•OH). The photochemical ROS production from ferrihydrites increased with decreasing ferrihydrite crystallinity. The crystallinity-dependent photochemical •OH production was primarily attributed to conduction band reduction reactions, with the reduction of O2 by conduction band electrons being the rate-limiting key process. Conversely, the crystallinity of iron minerals had a negligible influence on photon-to-electron conversion efficiency or surface Fenton-like activity. The difference in ROS productions led to a discrepant degradation efficiency of organic pollutants on iron mineral surfaces. Our study provides valuable insights into the crystallinity-dependent ROS productions from iron minerals in natural systems, emphasizing the significance of iron mineral photochemistry in natural sites with abundant lower-crystallinity iron minerals such as wetland water and surface soils.

Facet-dependent dispersion and aggregation of aqueous hematite nanoparticles

Nanoparticle aggregates in solution controls surface reactivity and function. Complete dispersion often requires additive sorbents to impart a net repulsive interaction between particles. Facet engineering of nanocrystals offers an alternative approach to produce monodisperse suspensions simply based on facet-specific interaction with solvent molecules. Here, we measure the dispersion/aggregation of three morphologies of hematite (α-Fe2O3) nanoparticles in varied aqueous solutions using ex situ electron microscopy and in situ small-angle x-ray scattering. We demonstrate a unique tendency of (104) hematite nanoparticles to maintain a monodisperse state across a wide range of solution conditions not observed with (001)- and (116)-dominated particles. Density functional theory calculations reveal an inert, densely hydrogen-bonded first water layer on the (104) facet that favors interparticle dispersion. Results validate the notion that nanoparticle dispersions can be controlled through morphology for specific solvents, which may help in the development of various nanoparticle applications that rely on their interfacial area to be highly accessible in stable suspensions.

Facet-dependent adsorption of aromatic organoarsenicals on hematite: The mechanism and environmental impact

Aromatic organoarsenic feed additives have been extensively used in poultry and livestock farming; however, a risk of releasing toxic inorganic arsenic exists when they are exposed to the environment. An in-depth understanding of the adsorption -migration behavior of aromatic organoarsenicals on environmental media is limited. In this study, p-arsanilic acid (p-ASA) and roxarsone (ROX) were considered as examples to systematically study their adsorption behaviors on the surface of hematite, a representative iron oxide in soil. By comparing the adsorption abilities and adsorption kinetics of hematite exposed with different facets (hexagonal nanoplates, HNPs, mainly exposed with {001} facets and hexagonal nanocubes, HNCs, exposed with {012} facets), combined with in situ shell-isolated nanoparticle enhanced Raman spectroscopy characterization and density functional theory simulation, the facet-dependent adsorption performance was observed and the mechanism revealed. The results showed that p-ASA formed a bidentate binuclear complex on HNCs and HNPs, whereas ROX formed monodentate mononuclear and bidentate binuclear configurations on the {001} and {012} facets, respectively. These differences not only lead to facet-dependent adsorption capacities but also affect their stability, as verified by sequential extraction experiments, affecting the environmental behavior and fate of aromatic organoarsenicals. This study not only provides insights into the environmental behavior of aromatic organoarsenicals but also offers theoretical support for the development of functional adsorbents and remediation strategies.

Photolysis of Dissolved Organic Matter over Hematite Nanoplatelets

Solar photoexcitation of chromophoric groups in dissolved organic matter (DOM), when coupled to photoreduction of ubiquitous Fe(III)-oxide nanoparticles, can significantly accelerate DOM degradation in near-surface terrestrial systems, but the mechanisms of these reactions remain elusive. We examined the photolysis of chromophoric soil DOM coated onto hematite nanoplatelets featuring (001) exposed facets using a combination of molecular spectroscopies and density functional theory (DFT) computations. Reactive oxygen species (ROS) probed by electron paramagnetic resonance (EPR) spectroscopy revealed that both singlet oxygen and superoxide are the predominant ROS responsible for DOM degradation. DFT calculations confirmed that Fe(II) on the hematite (001) surface, created by interfacial electron transfer from photoexcited chromophores in DOM, can reduce dioxygen molecules to superoxide radicals (•O2-) through a one-electron transfer process. 1H nuclear magnetic resonance (NMR) and electrospray ionization Fourier-transform ion cyclotron resonance mass spectrometry (ESI-FTICR-MS) spectroscopies show that the association of DOM with hematite enhances the cleavage of aromatic groups during photodegradation. The findings point to a pivotal role for organic matter at the interface that guides specific ROS generation and the subsequent photodegradation process, as well as the prospect of using ROS signatures as a forensic tool to help interpret more complicated field-relevant systems.

Facet-Specific Photocatalytic Degradation of Extracellular Antibiotic Resistance Genes by Hematite Nanoparticles in Aquatic Environments

The persistence of extracellular antibiotic resistance genes (ARGs) in aquatic environments has attracted increasing attention due to their potential threat to public health and the environment. However, the fate of extracellular ARGs in receiving water remains largely unknown. This study investigated the influence of hematite nanoparticles, a widespread natural mineral, on the photodegradation of extracellular ARGs in river water. Results showed that under exposure to visible light, hematite nanoparticles, at environmental concentrations, resulted in a 3-5 orders of magnitude reduction in extracellular ARGs. This photodegradation of extracellular ARGs is shown to be facet-dependent; the (001) facet of hematite demonstrates a higher removal rate than that of the (100) facet, which is ascribed to its enhanced adsorption capability and higher hydroxyl radical (•OH) production. Density functional theory (DFT) calculations corroborate this finding, indicating elevated iron density, larger adsorption energy, and lower energy barrier of •OH formation on the (001) facet, providing more active sites and •OH generation for extracellular ARG interaction. Gel electrophoresis and atomic force microscopy analyses further confirm that the (001) facet causes more substantial damage to extracellular ARGs than the (100) facet. These findings pave the way for predicting the photodegradation efficiency of hematite nanoparticles with varied facets, thereby shedding light on the inherent self-purification capacity for extracellular ARGs in both natural and engineered aquatic environments.

Elucidating the Role of Capping Agents in Facet-Dependent Adsorption Performance of Hematite Nanostructures

Organic capping agents are a ubiquitous and crucial part of preparing reproducible and homogeneous batches of nanomaterials, particularly nanocrystals with well-defined facets. Despite studies reporting surface ligands (e.g., capping agents) having a non-negligible role in catalytic behavior, their impact is less understood in contaminant adsorption, an important consideration given their potential to obfuscate facet-dependent trends in performance. To ascribe observed behaviors to the facet or the ligand, this report evaluates the impact of poly(N-vinyl-2-pyrrolidone) (PVP), a commonly utilized capping agent, on the adsorption performance of nanohematite particles of varying prevailing facet in the removal of selenite (Se(IV)) as a model system. The PVP capping agent reduces the available surface area for contaminant binding, thus resulting in a reduction in overall Se(IV) adsorbed. However, accounting for the effects of surface area, {012}-faceted nanohematite demonstrates a significantly higher sorption capacity for Se(IV) compared with that of {001}-faceted nanohematite. Notably, chemical treatment is minimally effective in removing strongly bound PVP, indicating that complete removal of surface ligands remains challenging.

Nanoparticle-Embedded Polymers and Their Applications: A Review

There has been increasing interest in the study and development of nanoparticle-embedded polymeric materials and their applications to special membranes. Nanoparticle-embedded polymeric materials have been observed to have a desirable compatibility with commonly used membrane matrices, a wide range of functionalities, and tunable physicochemical properties. The development of nanoparticle-embedded polymeric materials has shown great potential to overcome the longstanding challenges faced by the membrane separation industry. One major challenge that has been a bottleneck to the progress and use of membranes is the balance between the selectivity and the permeability of the membranes. Recent developments in the fabrication of nanoparticle-embedded polymeric materials have focused on how to further tune the properties of the nanoparticles and membranes to improve the performance of the membranes even further. Techniques for improving the performance of nanoparticle-embedded membranes by exploiting their surface characteristics and internal pore and channel structures to a significant degree have been incorporated into the fabrication processes. Several fabrication techniques are discussed in this paper and used to produce both mixed-matrix membranes and homogenous nanoparticle-embedded polymeric materials. The discussed fabrication techniques include interfacial polymerization, self-assembly, surface coating, and phase inversion. With the current interest shown in the field of nanoparticle-embedded polymeric materials, it is expected that better-performing membranes will be developed soon.

Oxide- and Silicate-Water Interfaces and Their Roles in Technology and the Environment

Interfacial reactions drive all elemental cycling on Earth and play pivotal roles in human activities such as agriculture, water purification, energy production and storage, environmental contaminant remediation, and nuclear waste repository management. The onset of the 21st century marked the beginning of a more detailed understanding of mineral aqueous interfaces enabled by advances in techniques that use tunable high-flux focused ultrafast laser and X-ray sources to provide near-atomic measurement resolution, as well as by nanofabrication approaches that enable transmission electron microscopy in a liquid cell. This leap into atomic- and nanometer-scale measurements has uncovered scale-dependent phenomena whose reaction thermodynamics, kinetics, and pathways deviate from previous observations made on larger systems. A second key advance is new experimental evidence for what scientists hypothesized but could not test previously, namely, interfacial chemical reactions are frequently driven by "anomalies" or "non-idealities" such as defects, nanoconfinement, and other nontypical chemical structures. Third, progress in computational chemistry has yielded new insights that allow a move beyond simple schematics, leading to a molecular model of these complex interfaces. In combination with surface-sensitive measurements, we have gained knowledge of the interfacial structure and dynamics, including the underlying solid surface and the immediately adjacent water and aqueous ions, enabling a better definition of what constitutes the oxide- and silicate-water interfaces. This critical review discusses how science progresses from understanding ideal solid-water interfaces to more realistic systems, focusing on accomplishments in the last 20 years and identifying challenges and future opportunities for the community to address. We anticipate that the next 20 years will focus on understanding and predicting dynamic transient and reactive structures over greater spatial and temporal ranges as well as systems of greater structural and chemical complexity. Closer collaborations of theoretical and experimental experts across disciplines will continue to be critical to achieving this great aspiration.

Photo-induced heterogeneous regeneration of Fe(Ⅱ) in Fenton reaction for efficient polycyclic antibiotics removal and in-depth charge transfer mechanism

Fenton reaction is regarded as a potential treatment for antibiotics removal, but challenges remain due to the sluggish reaction kinetics of Fe(III) reduction and incomplete degradation from insufficient active substance. Distinguished from traditional Fe(Ⅱ) regeneration techniques, this work focuses on utilizing the aliovalent redox pairs and built-in electric field to induce photo-excited electrons to cross the material interface and achieve Fe(III) reduction (heterogeneous regeneration). Herein, oxygen-deficient CeO₂ particles are anchored on metal-organic frameworks (MIL-88A) and thus constitute the heterojunction with enhanced photoelectric properties, accelerating the directional charge transfer. Consequently, the synthesized MIL-88A/CeO₂(OV) composite can degrade 95.76% of oxytetracycline within 60 min in photo-Fenton reaction and maintain a high mineralization rate (75.33%) after 4 cyclic tests. Furthermore, the charge transfer mechanisms of Fe cycle and antibiotics mineralization are both unveiled via experiment results and theorical calculation. This work proposes a new paradigm for constructing self-sufficient photo-Fenton catalytic system for efficient and sustainable removal of polycyclic antibiotics.

Hydroxyl radicals in natural waters: Light/dark mechanisms, changes and scavenging effects

Hydroxyl radicals (•OH) are the most active, aggressive and oxidative reactive oxygen species. In the natural aquatic environment, •OH plays an important role in the biogeochemistry cycle, biotransformation, and pollution removal. This paper reviewed the distribution and formation mechanism of •OH in aquatic environments, including natural waters, colloidal substances, sediments, and organisms. Furthermore, factors affecting the formation and consumption of •OH were thoroughly discussed, and the mechanisms of •OH generation and scavenging were summarized. In particular, the effects of climate change and artificial work on •OH in the largest natural aquatic environment, i.e., marine environment was analyzed with the help of bibliometrics. Moreover, Fenton reactions make the •OH variation more complicated and should not be neglected, especially in those areas with suspended particles and sediments. Regarding the •OH variation in the natural aquatic environment, more attention should be given to global change and human activities.

Advanced hematite nanomaterials for newly emerging applications

Because of the combined merits of rich physicochemical properties, abundance, low toxicity, etc., hematite (α-Fe2O3), one of the most chemically stable compounds based on the transition metal element iron, is endowed with multifunctionalities and has steadily been a research hotspot for decades. Very recently, advanced α-Fe2O3 materials have also been developed for applications in some cutting-edge fields. To reflect this trend, the latest progress in developing α-Fe2O3 materials for newly emerging applications is reviewed with a particular focus on the relationship between composition/nanostructure-induced electronic structure modulation and practical performance. Moreover, perspectives on the critical challenges as well as opportunities for future development of diverse functionalities are also discussed. We believe that this timely review will not only stimulate further increasing interest in α-Fe2O3 materials but also provide a profound understanding and insight into the rational design of other materials based on transition metal elements for various applications.

Interplay between Facets and Defects during the Dissociative and Molecular Adsorption of Water on Metal Oxide Surfaces

Surface terminations and defects play a central role in determining how water interacts with metal oxides, thereby setting important properties of the interface that govern reactivity such as the type and distribution of hydroxyl groups. However, the interconnections between facets and defects remain poorly understood. This limits the usefulness of conventional notions such as that hydroxylation is controlled by metal cation exposure at the surface. Here, using hematite (α-Fe₂O₃) as a model system, we show how oxygen vacancies overwhelm surface cation-dependent hydroxylation behavior. Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy was used to monitor the adsorption of molecular water and its dissociation to form hydroxyl groups in situ on (001), (012), or (104) facet-engineered hematite nanoparticles. Supported by density functional theory calculations of the respective surface energies and oxygen vacancy formation energies, the findings show how oxygen vacancies are more prone to form on higher energy facets and induce surface hydroxylation at extremely low relative humidity values of 5 × 10^-5%. When these vacancies are eliminated, the extent of surface hydroxylation across the facets is as expected from the areal density of exposed iron cations at the surface. These findings help answer fundamental questions about the nature of reducible metal oxide-water interfaces in natural and technological settings and lay the groundwork for rational design of improved oxide-based catalysts.

Visible-light-driven iron-based heterogeneous photo-Fenton catalysts for wastewater decontamination: A review of recent advances

Visible-light-driven heterogeneous photo-Fenton process has emerged as the most promising Fenton-derived technology for wastewater decontamination, owing to its prominent superiorities including the potential utilization of clean energy (solar light), and acceleration of ≡Fe(II)/≡Fe(III) dynamic cycle. As the core constituent, catalysts play a pivotal role in the photocatalytic activation of H₂O₂ to yield reactive oxidative species (ROS). To date, all types of iron-based heterogeneous photo-Fenton catalysts (Fe-HPFCs) have been extensively reported by the scientific community, and exhibited satisfactory catalytic performance towards pollutants decomposition, sometimes even exceeding the homogeneous counterparts (Fe(II)/H₂O₂). However, the relevant reviews on Fe-HPFCs, especially from the viewpoint of catalyst-self design are extremely limited. Therefore, this state-of-the-art review focuses on the available Fe-HPFCs in literatures, and gives their classification based on their self-characteristics and modification strategies for the first time. Two classes of representative Fe-HPFCs, conventional inorganic semiconductors of Fe-containing minerals and newly emerging Fe-based metal-organic frameworks (Fe-MOFs) are comprehensively summarized. Moreover, three universal strategies including (i) transition metal (TMs) doping, (ii) construction of heterojunctions with other semiconductors or plasmonic materials, and (iii) combination with supporters were proposed to tackle their inherent defects, viz., inferior light-harvesting capacity, fast recombination of photogenerated carriers, slow mass transfer and low exposure and uneven dispersion of active sites. Lastly, a critical emphasis was also made on the challenges and prospects of Fe-HPFCs in wastewater treatment, providing valuable guidance to researchers for the reasonable construction of high-performance Fe-HPFCs.

Sunlight-Driven Production of Reactive Oxygen Species from Natural Iron Minerals: Quantum Yield and Wavelength Dependence

Photochemically generated reactive oxygen species (ROS) play numerous key roles in earth's surface biogeochemical processes and pollutant dynamics. ROS production has historically been linked to the photosensitization of natural organic matter. Here, we report the photochemical ROS production from three naturally abundant iron minerals. All investigated iron minerals are photoactive toward sunlight irradiation, with photogenerated currents linearly correlated with incident light intensity. Hydroxyl radicals (^•OH) and hydrogen peroxide (H₂O₂) are identified as the major ROS species, with apparent quantum yields ranging from 1.4 × 10^-8 to 3.9 × 10^-8 and 5.8 × 10^-8 to 2.5 × 10^-6, respectively. Photochemical ROS production exhibits high wavelength dependence, for instance, the ^•OH quantum yield decreases with the increase of light wavelength from 375 to 425 nm, and above 425 nm it sharply decreases to zero. The temperature shows a positive impact on ^•OH production, with apparent activation energies ranging from 8.0 to 17.8 kJ/mol. Interestingly, natural iron minerals with impurities exhibit higher ROS production than their pure crystal counterparts. Compared with organic photosensitizers, iron minerals exhibit higher wavelength dependence, higher selectivity, lower efficiency, and long-term stability in photochemical ROS production. Our study highlights natural inorganic iron mineral photochemistry as a ubiquitous yet previously overlooked source of ROS.

Fate and Transport of Pharmaceuticals in Iron and Manganese Binary Oxide Coated Sand Columns

Predicting the fate and transport of pharmaceuticals in terrestrial environments requires knowledge of their interactions with complex mineral assemblages. To advance knowledge along this front, we examined the reactivity of pipemidic acid (PIP), a typical quinolone antibiotic, with quartz particles coated with a mixture of manganese oxide (MnO₂) and goethite (α-FeOOH) under static and dynamic flow conditions. Batch and dynamic column experiments showed that PIP binding to MnO₂ proceeded through a heterogeneous redox reaction, while binding to goethite was not redox-reactive. Mixed columns of aggregated goethite-manganese particles however enhanced redox reactivity because (i) goethite facilitated the transport of dissolved Mn(II) ion and increased the retention of PIP oxidation products, and (ii) MnO₂ was protected from passivation. This mobility behavior was predicted using transport models accounting for adsorption and transformation kinetics of PIP on both goethite and MnO₂. This work sheds new light on reactivity changes of mixtures of Fe and Mn oxides under flow-through conditions and will have important implications in predicting the fate and transport of redox-active organic compounds as well as development of new geomedia filters for environmental remediation.

A Novel Chemiluminescent Method for Efficient Evaluation of Heterogeneous Fenton Catalysts Using Cigarette Tar

The evaluation of the catalytic capacity of catalysts is indispensable research, as catalytic capacity is a crucial factor to dictate the efficiency of heterogeneous Fenton catalysis. Herein, we obtained cigarette tar-methanol extracts (CTME) by applying methanol to cigarette tar and found that CTME could cause CL reactions with Fe²⁺/H₂O₂ systems in acidic, neutral, and alkaline media. The CL spectrum experiment indicated that the emission wavelengths of the CTME CL reaction with Fe²⁺/H₂O₂ systems were about 490 nm, 535 nm, and 590 nm. Quenching experiments confirmed that hydroxyl radicals (•OH) were responsible for the CL reaction for CTME. Then the CL property of CTME was applied in-situ to rapidly determine the amounts of •OH in tetrachloro-1,4-benzoquinone (TCBQ)/H₂O₂ system in acidic, neutral and alkaline media, and the CL intensities correlated the best (R² = 0.99) with TCBQ concentrations. To demonstrate the utility of the CTME CL method, the catalytic capacity of different types and concentrations of catalysts in heterogeneous Fenton catalysis were examined. It was found that the order of CL intensities was consistent with the order of degradation efficiencies of Rhodamine B, indicating that this method could distinguish the catalytic capacity of catalysts. The CTME CL method could provide a convenient tool for the efficient evaluation of the catalytic capacity of catalysts in heterogeneous Fenton catalysis.

Insight into the Photodegradation of Microplastics Boosted by Iron (Hydr)oxides

Iron (hydr)oxides as a kind of natural mineral actively participate in the transformation of organic pollutants, but there is a large knowledge gap in their impacts on photochemical processes of microplastics (MPs). This study is the first to examine the degradation of two ordinary plastic materials, polyethylene (PE) and polypropylene (PP), mediated by iron (hydr)oxides (goethite and hematite) under simulated solar light irradiation. Both iron (hydr)oxides significantly promoted the degradation of MPs (particularly PP) with a greater effect by goethite than hematite, related to hydroxyl radical (^•OH) produced by iron (hydr)oxides. Under light irradiation, the surface Fe(II) phase catalyzed the production of H₂O₂ and promoted the release of Fe²⁺, leading to the subsequent light-driven Fenton reaction which produced a large amount of ^•OH. As the iron (hydr)oxides were modified with NaF at various concentrations, the activity of the surface Fe(II) as well as the release of Fe²⁺ were greatly reduced, and thus the ^•OH formation and MP degradation were depressed remarkably. It is worth noting that the surface hydroxyl groups (especially ≡FeOH) affected the reaction kinetics of ^•OH by regulating the activity of Fe species. These findings unveil the distinct impacts and intrinsic mechanisms of iron (hydr)oxides in influencing the photodegradation of MPs.

Facet effect of hematite on the hydrolysis of phthalate esters under ambient humidity conditions

Phthalate esters (PAEs) have been extensively used as additives in plastics and wallcovering, causing severe environmental contamination and increasing public health concerns. Here, we find that hematite nanoparticles with specific facet-control can efficiently catalyze PAEs hydrolysis under ambient humidity conditions, with the hydrolysis rates 2 orders of magnitude higher than that in water saturated condition. The catalytic performance of hematite shows a significant facet-dependence with the reactivity in the order {012} > {104} ≫ {001}, related to the atomic array of surface undercoordinated Fe. The {012} and {104} facets with the proper neighboring Fe-Fe distance of 0.34-0.39 nm can bidentately coordinate with PAEs, and thus induce much stronger Lewis-acid catalysis. Our study may inspire the development of nanomaterials with appropriate surface atomic arrays, improves our understanding for the natural transformation of PAEs under low humidity environment, and provides a promising approach to remediate/purify the ambient air contaminated by PAEs.

Facet-engineered hematite boosts microbial electrogenesis by synergy of promoting electroactive biofilm formation and extracellular electron transfer

Hematite has been proven to be an excellent material for enhancing extracellular electron transfer (EET) in microbial bioelectrochemical systems (BESs). However, the effect of hematite with different exposed facets on microbial EET remains unclear. Here, we synthesized two types of hematite nanoparticles with high {100} and {001} facet exposure (Hem_{100} and Hem_{001}), respectively, which were coated on ITO electrode to stimulate the microbial EET in the BESs. The results showed that the maximum biocurrent density of commercial hematite nanoparticles (Hem_NPs), Hem_{100} and Hem_{001} electrodes reached 73.33 ± 5.68, 129.33 ± 9.12 and 287.00 ± 19.89 μA cm^-2 from three replicates of each treatment, respectively. The current generation achieved from the Hem_{001} electrode was nearly 199-times higher than that of the blank ITO electrode (1.44 ± 0.10 μA cm^-2). The electrochemical measurements showed that the lowest charge transfer resistance (R_ct) was observed for the Hem_{001}, and the promoted biofilm formation and EPS secretion on the Hem_{001} electrode were also revealed, which could contribute the high performance of this electrode. Moreover, metagenomic analysis revealed that Hem_{001} might facilitate the microbial EET by stimulating the expression of genes related to cytochrome c and conductive nanowires. This study not only provides a new strategy to enhance microbial electrogenesis but also expands the knowledge of the effect of facet on microbial EET, helping to develop more efficient electrode materials in the future.

Hematite/selenium disulfide hybrid catalyst for enhanced Fe(III)/Fe(II) redox cycling in advanced oxidation processes

Regeneration of Fe(II) is a key issue for heterogeneous advanced oxidation processes (AOPs) using iron-based catalysts. Herein, a hybrid catalyst was developed from α-Fe₂O₃ and SeS₂ to enhance the Fe(III)/Fe(II) redox cycling in both hydrogen peroxide (H₂O₂) system and persulfate (PS) system. The regeneration of Fe(II) was evidenced by the increased Fe(II)/Fe(III) ratio in the used catalyst (205.8% in the H₂O₂ system or 125.4% in the PS system), compared to 68.4% in the fresh hybrid catalyst Fe/Se-3. Methyl orange was used as a model pollutant to evaluate the degradation performance of the hybrid catalyst. Owing to the promotion of Fe(II) regeneration, Fe/Se-3 achieved a pollutant removal efficiency of 100.0% in 12 min in both systems, significantly higher than that with pure α-Fe₂O₃ (33.9 ± 3.6% in the H₂O₂ system or 30.7 ± 2.8% in the PS system). The dominant active species were identified as hydroxyl radicals in the H₂O₂ system and sulfate radicals in the PS system. In the proposed mechanism, soluble and surface-bound Fe species are provided by α-Fe₂O₃ to activate H₂O₂ or PS to radicals, and SeS₂ participates in the reactions via Se(IV) reducing Fe(III) to Fe(II) and S atoms being released through protonation to expose more active Se sites.

Stoichiometric Control Synthesis of Pyrite and Greigite Particles Used for Photo-Fenton Degradation Catalysis

Two types of iron sulfide, i.e., highly crystalline pyrite (FeS2) and greigite (Fe3S4) were synthesized via hot-injection method only by changing the precursor ratios of iron to sulfur (Fe:S) from...

Facet-Dependent Photoinduced Transformation of Cadmium Sulfide (CdS) Nanoparticles

Microbial-mediated transformation of anthropogenic Cd²⁺ controls its distribution, bioavailability, and potential risks. However, the processes readily form CdS nanoparticles (CdS-NPs), which exhibit dissolution behavior different from that of larger sized particles. Here, we investigated the effects of morphologies and facets of CdS-NPs on their photoinduced dissolution. Three CdS-NPs, CdS-sphere, CdS-rod, and CdS-sheet, and one nanosized biogenic CdS (Bio-CdS) were synthesized with different dominant facets of {101}, {100}, {001}, and {111} and thus distinct surface chemistry. As explored by HRTEM, EPR, and DFT calculations, photogenerated e^-/h⁺ pairs were more likely to generate on CdS-sheet surfaces due to higher surface energies and a narrower band gap, facilitating the formation of •OH and thereby faster dissolution (k_obs = 6.126-6.261 × 10^-2 h^-1). The wider band gaps of CdS-sphere and CdS-rod caused less formation of O₂^•- and •OH, leading to slower oxidative dissolutions (k_obs = 0.090-0.123 and 2.174-3.038 × 10^-2 h^-1, respectively). Given the similar surface energy as that of CdS-sheet, the dissolution rate of Bio-CdS was close to that of CdS-rod and CdS-sheet, which was 1.6-3.5 times faster than that of larger sized CdS, posing higher environmental risks than thought. Altogether, this work revealed the facet effects on the dissolution of CdS-NPs, manifesting a deeper understanding of metal sulfides' environmental behaviors.

Enhanced degradation of tetracycline in water over Cu-doped hematite nanoplates by peroxymonosulfate activation under visible light irradiation

Herein, Cu-doped hematite nanoplates (named as CuHNPs) with abundant oxygen-vacancies were prepared through a facile one-pot solvothermal method and used for efficient peroxymonosulfate (PMS) activation to degrade tetracycline (TC) in water. The catalytic activity of optimal CuHNPs-7.5 catalyst to activate PMS for the degradation of TC in water under visible light irradiation is 7.74 and 2.93 times higher than that of pure one without and with visible light irradiation. CuHNPs-7.5 exhibited excellent degradation for TC in the broad pH range from 2.14 to 10.75, and the removal of TC was barely inhibited by co-anions. The combination of free radicals and non-radical pathway, including sulfate radicals (SO₄^·-), hydroxide radicals (·OH), superoxide radical (·O₂^-) and single oxygen (¹O₂), contributed to TC oxidation. The introduction of Cu²⁺ not only accelerated the transformation of Fe(III)/Fe(II) redox cycle but also induced rich oxygen defects in the structure of hematite, boosting more generation of reactive oxygen species (ROSs) for TC degradation. Density functional theory (DFT) calculation and electrochemical impedance spectroscopy (EIS) tests confirmed the accelerated electrons transfer of CuHNPs-7.5 in PMS activation. This study provides a strategy to construct effective catalysts of PMS activation combining radicals and non-radical pathways for environmental remediation.

Critical review of natural iron-based minerals used as heterogeneous catalysts in peroxide activation processes: Characteristics, applications and mechanisms

Recently, an increasing number of works have been reported about iron-based materials applied as catalysts in peroxide activation processes to degrade pollutants in water. Iron-based catalysts include synthetic and natural iron-based materials. However, some synthetic iron-based materials are difficult to scale up in the practical applications due to high cost and serious secondary environmental pollution. In contrast, natural iron-based minerals are more available and cheaper, and also hold a great promise in peroxide activation processes for pollutant degradation. In this review, we classify different natural iron-based materials into two categories: iron oxide minerals (e.g., magnetite, hematite, and goethite,), and iron sulfide minerals (e.g., pyrite and pyrrhotite,). Their overview applications in peroxide activation processes for pollutant degradation in wastewaters are systematically summarized for the first time. Moreover, the peroxide activation mechanisms induced by natural minerals, and the influences of reaction conditions in different systems are discussed. Finally, the application prospects and existing drawbacks of natural iron-based minerals in the peroxide activation processes for wastewater treatment are proposed. We believe this review can shed light on the application of natural iron-based minerals in peroxide activation processes and present better perspectives for future researches.

Iron Minerals Mediated Interfacial Hydrolysis of Chloramphenicol Antibiotic under Limited Moisture Conditions

Iron minerals are important soil components; however, little information is available for the transformation of antibiotics on iron mineral surfaces, especially under limited moisture conditions. In this study, we investigated the catalytic performance of four iron minerals (maghemite, hematite, goethite, and siderite) for the hydrolysis of chloramphenicol (CAP) antibiotic at different moisture conditions. All the iron oxides could efficiently catalyze CAP hydrolysis with the half-lives <6 days when the surface water content was limited, which was controlled by the atmospheric relative humidity of 33-76%. Different minerals exhibited distinctive catalytic processes, depending on the surface properties. H-bonding or Lewis acid catalysis was proposed for surface hydrolytic reaction on iron oxides, which however was almost completely inhibited when the surface water content was >10 wt % due to the competition of water molecules for surface reactive sites. For siderite, the CAP hydrolysis was resistant to excessive surface water. A bidentate H-bonding interaction mechanism would account for CAP hydrolysis on siderite. The results of this study highlight the importance of surface moisture on the catalytic performance of iron minerals. The current study also reveals a potential degradation pathway for antibiotics in natural soil, which has been neglected before.

Fe(II) Redox Chemistry in the Environment

Iron (Fe) is the fourth most abundant element in the earth's crust and plays important roles in both biological and chemical processes. The redox reactivity of various Fe(II) forms has gained increasing attention over recent decades in the areas of (bio) geochemistry, environmental chemistry and engineering, and material sciences. The goal of this paper is to review these recent advances and the current state of knowledge of Fe(II) redox chemistry in the environment. Specifically, this comprehensive review focuses on the redox reactivity of four types of Fe(II) species including aqueous Fe(II), Fe(II) complexed with ligands, minerals bearing structural Fe(II), and sorbed Fe(II) on mineral oxide surfaces. The formation pathways, factors governing the reactivity, insights into potential mechanisms, reactivity comparison, and characterization techniques are discussed with reference to the most recent breakthroughs in this field where possible. We also cover the roles of these Fe(II) species in environmental applications of zerovalent iron, microbial processes, biogeochemical cycling of carbon and nutrients, and their abiotic oxidation related processes in natural and engineered systems.

Noble Metal-Free FeOOH/Li0.1WO3 Core-Shell Nanorods for Selective Oxidation of Methane to Methanol with Visible-NIR Light

Hydroxyl radicals (^•OH) generated in the photocatalytic process are crucial to the conversion of methane (CH₄) to value-added methanol (CH₃OH) at room temperature. However, utilizing noble metal-free catalysts and low-energy photons of solar light, such as visible and near-infrared light (vis-NIR), is difficult to provide more electron states to form ^•OH radicals. Here, we developed FeOOH/Li_0.1WO₃ core-shell nanorods via a two-step in/out co-modification of hexagonal tungsten oxide (h-WO₃): (1) lithium ions intercalating into the hexagonal tunnels of h-WO₃ to form Li_0.1WO₃ nanorods and (2) using FeOOH-wrapped Li_0.1WO₃ to obtain FeOOH/Li_0.1WO₃ core-shell nanorods. Introduction of lithium induces polaron transition in Li_0.1WO₃, enabling the absorption of vis-NIR light. Interestingly, FeOOH-based Fenton-like reaction when H₂O₂ is selected as an oxidant favors the generation of more ^•OH radicals available for CH₄ oxidation to CH₃OH. Meanwhile, FeOOH with Fe^III as an "electron sink" highly improves the separation of photoinduced electrons and holes in Li_0.1WO₃. Eventually, efficient selective formation of CH₄OH is achieved with remarkable generation rates up to ∼342 and ∼160 μmol g^-1 at visible light (420-700 nm) and NIR light (≥800 nm), respectively. Our finding opens up new possibilities for developing noble metal-free catalysts for solar energy-driven CH₄ conversion to CH₃OH under ambient conditions.

Pyrogenic Carbon Initiated the Generation of Hydroxyl Radicals from the Oxidation of Sulfide

Sulfide is one of the most abundant reductants in the subsurface environment, while pyrogenic carbon is a redox medium that widely exists in sulfide environment. Previous studies have found pyrogenic carbon can mediate the reductive degradation of organic pollutants under anoxic sulfide conditions; however, the scenario under oxic sulfide conditions has rarely been reported. In this study, we found that pyrogenic carbon can mediate hydroxyl radicals (^•OH) generation from sulfide oxidation under dark oxic conditions. The accumulated ^•OH ranged from 2.07 to 101.90 μM in the presence of 5 mM Na₂S and 100 mg L^-1 pyrogenic carbon at pH 7.0 within 240 min. The Raman spectra and electrochemical cell experiments revealed that the carbon defects were the possible chemisorption sites for oxygen, while the graphite crystallites were responsible for the electron transfer from sulfide to O₂ to generate H₂O₂ and ^•OH. Quenching experiments and degradation product identification showed that As(III) and sulfanilamide can be oxidized by the generated ^•OH. This research provides a new insight into the important role of pyrogenic carbon in redox reactions and dark ^•OH production.

Hematite facet-mediated microbial dissimilatory iron reduction and production of reactive oxygen species during aerobic oxidation

Microbial dissimilatory iron reduction and aerobic oxidation affect the biogeochemical cycles of many elements. Although the processes have been widely studied, the underlying mechanisms, and especially how the surface structures of iron oxides affect these redox processes, are poorly understood. Therefore, {001} facet-dominated hematite nanoplates (HNP) and {100} facet-dominated hematite nanorods (HNR) were used to explore the effects of surface structure on the microbial dissimilatory iron reduction and aerobic oxidation processes. During the reduction stage, the production of total Fe(II) normalized by specific surface area (SSA) was higher for HNP than HNR due to steric effects and the ligand-bound conformation of the connection between iron on different exposed facets and electron donors from microorganisms. However, during the aerobic oxidation stage, both the SSA- and Fe(II)-normalized reactive oxygen species (ROS), including hydrogen peroxide (H₂O₂) and hydroxyl radical (•OH), were higher for HNR than HNP. Theoretical calculation results showed that the {100} facets exhibited a lower activation energy barrier for oxygen reduction reaction than {001} facets, supporting the experimental observation that {100} facet-dominated HNR had a higher ROS production efficiency than {001} facet-dominated HNP. These results indicated that surface characteristics not only mediated the microbial reduction of Fe(III) but also affected the aerobic oxidation of microbially reduced Fe(II). Accessibility of electron donors to surface iron atom determined the reduction of Fe(III), and activation energy barrier for oxygen reduction by surface Fe(II) dominated the ROS production during the redox processes. This study advances our understanding of the mechanisms through which ROS are produced by iron (oxyhydr)oxides during microbial dissimilatory iron reduction and aerobic oxidation processes.

Enhanced Fenton-like degradation of sulfadiazine by single atom iron materials fixed on nitrogen-doped porous carbon

The use of single-atom iron catalysts in heterogeneous Fenton-like reactions has demonstrated tremendous potential for antibiotic wastewater treatment. In this study, single-atom iron fixed on nitrogen-doped porous carbon materials (Fe-ISAs@CN) was synthesised using a metal organic framework (MOF) as a precursor. Fe-ISAs@CN was applied as a heterogeneous Fenton catalyst to activate H₂O₂ for the degradation of sulfadiazine (SDZ) in an aqueous solution. The physical and chemical properties of Fe-ISAs@CN were characterised by scanning electron microscopy (SEM), transmission electron microscope (TEM), high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and rotating disk electrode (RDE) measurements. The results of our degradation experiments indicated that Fe-ISAs@CN exhibited remarkable activity and stability for the degradation of SDZ over a wide pH range; even after five cycles, Fe-ISAs@CN retained a high catalytic efficiency (>80%). The 5,5-dimethyl-1-oxaporphyrin-n-oxide (DMPO)-X signal captured by electron paramagnetic resonance (EPR) spectroscopy indicated that a large amount of hydroxyl radicals (OH) was produced in the reaction system. Quench tests indicated that the OH was the main active substance in the degradation of SDZ. The degradation products of the reaction were analysed by High Performance Liquid Chromatography-Mass Spectrometry (HPLC-MS), and possible degradation pathways for the SDZ degradation were proposed.

Facet-Dependent Photodegradation of Methylene Blue by Hematite Nanoplates in Visible Light

The expression of specific crystal facets in different nanostructures is known to play a vital role in determining the sensitivity toward the photodegradation of organics, which can generally be ascribed to differences in surface structure and energy. Herein, we report the synthesis of hematite nanoplates with controlled relative exposure of basal (001) and edge (012) facets, enabling us to establish direct correlation between the surface structure and the photocatalytic degradation efficiency of methylene blue (MB) in the presence of hydrogen peroxide. MB adsorption experiments showed that the capacity on (001) is about three times larger than on (012). Density functional theory calculations suggest the adsorption energy on the (001) surface is 6.28 kcal/mol lower than that on the (012) surface. However, the MB photodegradation rate on the (001) surface is around 14.5 times faster than on the (012) surface. We attribute this to a higher availability of the photoelectron accepting surface Fe³⁺ sites on the (001) facet. This facilitates more efficient iron valence cycling and the heterogeneous photo-Fenton reaction yielding MB-oxidizing hydroxyl radicals at the surface. Our findings help establish a rational basis for the design and optimization of hematite nanostructures as photocatalysts for environmental remediation.

Photocatalytic degradation of organic dyes and phenol by iron-silicate glass prepared by the sol–gel method

A highly efficient photo-Fenton catalyst iron silicate glass was successfully prepared by a simple sol–gel method.

Toward Informed Design of Nanomaterials: A Mechanistic Analysis of Structure-Property-Function Relationships for Faceted Nanoscale Metal Oxides

Nanoscale metal oxides (NMOs) have found wide-scale applicability in a variety of environmental fields, particularly catalysis, gas sensing, and sorption. Facet engineering, or controlled exposure of a particular crystal plane, has been established as an advantageous approach to enabling enhanced functionality of NMOs. However, the underlying mechanisms that give rise to this improved performance are often not systematically examined, leading to an insufficient understanding of NMO facet reactivity. This critical review details the unique electronic and structural characteristics of commonly studied NMO facets and further correlates these characteristics to the principal mechanisms that govern performance in various catalytic, gas sensing, and contaminant removal applications. General trends of facet-dependent behavior are established for each of the NMO compositions, and selected case studies for extensions of facet-dependent behavior, such as mixed metals, mixed-metal oxides, and mixed facets, are discussed. Key conclusions about facet reactivity, confounding variables that tend to obfuscate them, and opportunities to deepen structure-property-function understanding are detailed to encourage rational, informed design of NMOs for the intended application.

The effect of hybrid zinc oxide/graphene oxide (ZnO/GO) nano-catalysts on the photocatalytic degradation of simazine

The photocatalytic degradation of simazine (SIM) was investigated using zinc oxide/graphene oxide (ZnO/GO) composite materials under visible light irradiation. The reaction kinetics was studied to optimize the reaction parameters for efficient degradation of SIM. Batch studies were performed to investigate the effects of initial reaction pH, the loading of the ZnO onto GO, and mass of catalyst on the removal of SIM from aqueous solution. A pH of 2 was determined to be the optimal reaction pH for the different ZnO-loaded GO catalysts. In addition, a mass of 40 mg of catalyst in the reaction was observed to be the most effective for the catalysts synthesized using 20 and 30 mmol of Zn²⁺ ions; whereas a mass of 10 mg was most effective for the ZnO/GO composite material synthesized using 10 mmol Zn²⁺ ions. The reaction was observed to follow a second-order kinetics for the degradation process. Furthermore, the synthesized ZnO/GO composite catalysts resulted in higher reaction rates than those observed for pure ZnO. The 30 mmol ZnO/GO composite expressed a rate of SIM degradation ten times greater than the rate observed for pure ZnO, and sixty-two times greater than the rate of photolysis. In addition, the catalyst cycling exhibited a constant photocatalytic activity for the ZnO/GO composite over three reaction cycles without the need of a conditioning cycle.

Strong mineralogic control of soil organic matter composition in response to nutrient addition across diverse grassland sites

Soil organic matter (SOM) dynamics are central to soil biogeochemistry and fertility. The retention of SOM is governed initially by interactions with minerals, which mediate the sorption of chemically diverse organic matter (OM) molecules via distinct surface areas and chemical functional group availabilities. Unifying principles of mineral-OM interactions remain elusive because of the multi-layered nature of biochemical-mineral interactions that contribute to soil aggregate formation and the heterogeneous nature of soils among ecosystems. This study sought to understand how soil mineralogy as well as nitrogen (N) enrichment regulate OM composition in grassland soils. Using a multi-site grassland experiment, we demonstrate that the composition of mineral-associated OM depended on the clay content and specific mineral composition in soils across the sites. With increasing abundance of ferrihydrite (Fh) across six different grassland locations, OM in the hydrophobic zone became more enriched in lipid- and protein-like compounds, whereas the kinetic zone OM became more enriched in lignin-like molecules. These relationships suggest that the persistence of various classes of OM in soils may depend on soil iron mineralogy and provide experimental evidence to support conceptual models of zonal mineral-OM associations. Experimental N addition disrupted the accumulation of protein-like molecules in the hydrophobic zone and the positive correlation of lignin-like molecules in the kinetic zone with Fh content, compared to unfertilized soils. These data suggest that mineralogy and clay content together influence the chemical composition not only of mineral-associated OM, but also of soluble compounds within the soil matrix. If these relationships are prevalent over larger spatial and temporal scales, they provide a foundation for understanding SOM cycling and persistence under a variety of environmental contexts.

Fe3O4/PVDF catalytic membrane treatment organic wastewater with simultaneously improved permeability, catalytic property and anti-fouling

Fe₃O₄/Polyvinylidene fluoride (PVDF) three-channel hollow fiber catalytic membrane was successfully fabricated via non-solvent induced phase inversion and used for organic wastewater degradation in this work. The effects of Fe₃O₄ nanoparticles addition on the surface and cross-section morphologies, hydrophilicity and thermal properties of the catalytic membrane were characterized by the field emission scanning electron microscopy (SEM), water contact angle and thermogravimetric analysis (TGA), respectively. The obtained catalytic membrane exhibited good hydrophilicity, a high pure water flux of 175.8 L m^-2 h^-1 and a high removal of methylene blue (up to 97.6%) with Fenton catalytic reaction. Meanwhile, the catalytic membrane shows excellent anti-fouling property due to the presence of Fenton reaction. Our results show that Fe₃O₄/PVDF three-channel hollow fiber catalytic membrane was a promising alternative for the degradation of organic contaminants.

Adsorption kinetics, conformational change, and enzymatic activity of β-glucosidase on hematite (α-Fe2O3) surfaces

Substantial fractions of extracellular enzymes are intimately associated with soil minerals, which may protect enzymes from denaturation, precipitation, proteolysis, or microbial consumption in soil environments. However, how mineral surface properties affect enzyme-mineral interactions and enzymatic activity of enzymes associated to mineral surface is still unclear. In the present study, adsorption behavior, conformational change, and enzymatic activity of β-glucosidase (BG) on hematite (001) face and (104) face, respectively, were investigated using in situ attenuated total reflectance FTIR spectroscopy and batch experiments. β-glucosidase undergoes greater conformational changes upon adsorption onto hematite (104) face than on hematite (001) face, probably due to the stronger protein-surface interactions on (104) face with the relatively higher surface hydroxyl density. On the other hand, the amount of BG sorbed on hematite (001) face was nearly two times higher than that on hematite (104) at the end of the 150-min adsorption experiments, due to the higher extent of conformational change in β-glucosidase on hematite (104) face. Correspondingly, the initial rate of cellobiose hydrolysis by per gram of β-glucosidase adsorbed on hematite (104) face was 1.7 times higher than that on hematite (001) face. However, when the density of hematite particles was same, the extent of cellobiose hydrolysis was 1.2 times higher on hematite (001) face than that on the (104) face, because of the higher adsorbed amount of β-glucosidase on the former. This study decoupled the effects of mineral surface properties on adsorption kinetics and conformational changes of soil enzymes bound to soil minerals and provided new insights into the correlation between mineral surface properties and catalytical activity of mineral-associated enzymes in soil environments.

Potassium Ferrite as Heterogeneous Photo-Fenton Catalyst for Highly Efficient Dye Degradation

In this work, hexagon-shaped potassium ferrite (K2Fe4O7) crystals with different sizes were prepared using the hydrothermal method. The crystals showed a narrow band gap of 1.44 eV, revealed by UV-visible diffuse reflectance spectroscopy, and was thus used as a heterogeneous Fenton catalyst to degrade methylene blue (MB) and crystal violet (CV) in the presence of green oxidant H2O2 under visible-light irradiation. Among the investigated crystals, the as-prepared one with an average size of 20 µm (KFO-20) exhibited better photocatalytic activity due to its high surface area. When it was used as a photo-Fenton catalyst, 100% MB and 92% CV were degraded within 35 min. Moreover, the catalyst maintained high photocatalytic activity and was stable after four continuous cycles. The trapping experiments showed that the active hydroxyl radical (·OH) was dominant in the photo-Fenton reaction. Therefore, this new photo-Fenton catalyst has great potential for the photocatalytic degradation of dye contaminants in water.