Simultaneous Determination of Five Diamide Insecticides in Food Matrices Using Carbon Nanotube Multiplug Filtration Cleanup and Ultrahigh-Performance Liquid Chromatography-Tandem Mass Spectrometry

Computer-aided design of novel anthranilic diamides containing fluorinated alkoxy groups as potential ryanodine receptor insecticides

BACKGROUND

Increasing the diversity of lead compounds has been shown to enhance the efficacy of diamide insecticides. Fifty novel compounds were precisely designed and synthesized utilizing fragment-based assembly and virtual screening coupling.

RESULTS

The median lethal concentration (LC50) values of compounds X-30 and X-40 against Mythimna separata were 0.09 and 0.08 mg L-1, respectively, which are lower than that of chlorantraniliprole (CHL, 0.11 mg L-1). Notably, compounds X-10, X-18, X-25, X-32 and X-43 had corresponding LC50 values of 2.0 × 10-4, 5.0 × 10-4, 6.0 × 10-4, 9.0 × 10-4 and 7.0 × 10-4 mg L-1 against Plutella xylostella, respectively. The best compound X-10 exhibited five-fold greater efficacy than CHL (1.0 × 10-3 mg L-1). The LC50 values of compounds X-21, X-29, and X-40 against Spodoptera frugiperda were 0.27, 0.26 and 0.25 mg L-1, respectively, which are slightly lower than that of CHL (0.33 mg L-1). In the case of Ostrinia furnacalis, compound X-43 showed good efficacy with LC50 values comparable to those of CHL (1.38 versus 1.57 mg L-1). Calcium imaging experiments demonstrated that X-21 acted on S. frugiperda ryanodine receptors. Furthermore, this series of compounds showed safety toward nontarget mammals compared to CHL.

CONCLUSION

The introduction of fluorinated alkoxy groups at the 3-position of the pyrazole ring leads to good insecticidal activity and improved insect selectivity. © 2025 Society of Chemical Industry.

Development and validation of a combined QuEChERS and HPLC-MS/MS method for trace analysis of ten diamide insecticides in agricultural products

Diamide insecticides are being widely registered worldwide, yet most of them lack established maximum residue limits (MRLs) in agricultural products. In this study, we combined a QuEChERS (quick, easy, cheap, efficient, rugged, and safe) extraction method with high-performance liquid chromatography coupled to tandem mass spectrometry (HPLC-MS/MS) analysis to simultaneously identify and quantify ten diamide insecticides in seven matrices for the first time. The method was validated in accordance with SANTE/11312/2021 guidelines, including sensitivity, linearity, trueness, and precision. Excellent linearity (R2 > 0.99) was obtained for all diamide insecticides within the concentration range of 5-1000 µg kg-1. The limit of detection (LOD) and limit of quantification (LOQ) were 0.01-1 µg kg-1 and 5 µg kg-1, respectively. The recoveries of the ten diamide insecticides at three levels (5, 100, and 1000 µg kg-1) ranged from 76.6% to 108.2% with good intra-day relative standard deviation (RSDr) (1.0-13.4%) and inter-day relative standard deviation (RSDR) (2.3-15.7%). The proposed method was applied to analyze 70 real agricultural product samples, and only six samples contained diamide insecticides. The results demonstrated that the method was both convenient and reliable for detecting diamide insecticides in agricultural products. The method was then applied to analyze agricultural product samples collected in a field trial to estimate the MRLs for the next step.

Covalent organic frameworks hybridized polymeric high internal phase emulsions with amphiphilicity for extraction of trace bisamide insecticides in food samples

Polymeric high internal phase emulsions decorated with covalent organic frameworks (polyHIPEs-COFs) were synthesized and used as the sorbent for cyantraniliprole and chlorantraniliprole. Pickering high internal phase emulsions stabilized by covalent organic frameworks solid particles and liquid surfactants (Span80 and polyvinylpyrrolidone) endow the composites with open-cell structures and superwettability. The amphiphilicity and open-cell structures enable rapid adsorption and desorption for cyantraniliprole and chlorantraniliprole, and the solid-phase extraction process can be completed in 5 min. The adsorption efficiencies of polyHIPEs-COFs for cyantraniliprole and chlorantraniliprole are above 85.19%, but lower than 10% for fenvalerate, anti-aphid, and chlorpyrifos, demonstrating the good adsorption selectivity for cyantraniliprole and chlorantraniliprole. The adsorption efficiencies of cyantraniliprole and chlorantraniliprole using a same polyHIPEs-COFs and five different batches of polyHIPEs-COFs range from 94.25 to 100.00%, revealing the good reproducibility of the sorbent. In addition, the polyHIPEs-COF-based solid-phase extraction combined with high-performance liquid chromatography-ultraviolet detector (HPLC-UV) was developed for determination of bisamide insecticides in vegetable (eggplants, tomatoes, and peppers) samples. Results showed that the method was feasible to determine the cyantraniliprole and chlorantraniliprole in real vegetable samples with a linear range of 0.012-1.2 μg/kg and limits of detection of 0.0075-0.0090 μg/kg. The recoveries of cyantraniliprole and chlorantraniliprole spiked in vegetable samples ranged from 85.00 to 100.00% with relative standard deviations less than 3.52%. The study indicates the feasibility of amphiphilic polyHIPEs-COFs in extraction and enrichment of bisamide insecticides from vegetable samples for HPLC-UV analysis.

Dissipation behavior and risk assessment of imidacloprid and its metabolites in apple from field to products

Pesticides play vital roles in controlling pests and boosting crop yields. Imidacloprid is widely used all over the world and may form in agricultural products. The presence of pesticide residues in apples raises serious health concerns. Understanding the residual fate of imidacloprid is critical for food safety and human health. In this study, the dissipation behavior, metabolism, household processing and risk assessment of imidacloprid and its metabolites in apple were investigated from filed to products. Field experiment results suggested that the half-lives of imidacloprid at 5 times the recommended dosage was 1.5 times that of the standard dosage. And the final residues of imidacloprid were less than the established maximum residue limits (MRLs). Clarification and simmering had little effect on the reduction the residues of imidacloprid and its metabolites. The calculated processing factors were lower than 1 for imidacloprid and its metabolites, implying that the residual ratios of imidacloprid and its metabolites in each steps of the food processing were reduced. The risk quotients were <1 for all Chinese people, indicating that acceptable risks associated with dietary exposure to imidacloprid in apple. However, the higher risks were observed in young people than adults, and females faced higher risks than males. Given high residue levels in pomace, imidacloprid and its metabolites should be further studied in commercial byproducts.

Dissipation and Safety Analysis of Dimethomorph Application in Lychee by High-Performance Liquid Chromatography-Tandem Mass Spectrometry with QuEChERS

This study presents a method for analyzing dimethomorph residues in lychee using QuEChERS extraction and HPLC-MS/MS. The validation parameters for this method, which include accuracy, precision, linearity, and recovery, indicate that it meets standard validation requirements. Following first-order kinetics, the dissipation dynamic of dimethomorph in lychee was determined to range from 6.4 to 9.2 days. Analysis of terminal residues revealed that residues in whole lychee were substantially greater than those in the pulp, indicating that dimethomorph residues are predominantly concentrated in the peel. When applied twice and thrice at two dosage levels with pre-harvest intervals (PHIs) of 5, 7, and 10 days, the terminal residues in whole lychee ranged from 0.092 to 1.99 mg/kg. The terminal residues of the pulp ranged from 0.01 to 0.18 mg/kg, with the residue ratio of whole lychee to pulp consistently exceeding one. The risk quotient (RQ) for dimethomorph, even at the recommended dosage, was less than one, indicating that the potential for damage was negligible. This study contributes to the establishment of maximum residue limits (MRLs) in China by providing essential information on the safe application of dimethomorph in lychee orchards.

Magnetic molecularly imprinted polymers integrated ionic liquids for targeted detecting diamide insecticides in environmental water by HPLC-UV following MSPE

Efficiently detecting diamide insecticides in environmental water is challenging due to their low concentrations and complex matrix interferences. In this study, we developed ionic liquids (ILs)-incorporated magnetic molecularly imprinted polymers (IL-MMIPs) for the detection of diamide insecticides, capitalizing on the advantages of ILs and quick magnetic separation through surface imprinting. Tetrachlorantraniliprole was used as the template, and a specific IL, 1-vinyl-3-ethylimidazolium hexafluorophosphate ([VEIm][PF6]), was employed as the functional monomer. Various synthesis conditions were investigated to optimize adsorption efficiency. The prepared IL-MMIPs were successfully employed as adsorbents in magnetic solid-phase extraction (MSPE) to selectively extract, separate, and quantify three types of diamide insecticides from water samples using HPLC-UV detection. Under optimal conditions, the analytical method achieved low limits of detection (0.69 ng mL-1, 0.64 ng mL-1, 0.59 ng mL-1 for cyantraniliprole, chlorantraniliprole and tetrachlorantraniliprole, respectively). The method also displayed a wide linear range (0.003-10 μg mL-1 for cyantraniliprole and chlorantraniliprole, and 0.004-10 μg mL-1 for tetrachlorantraniliprole, respectively) with satisfactory coefficients (R2≥0.9996), and low relative standard deviation (RSD≤2.55%). Additionally, extraction recoveries fell within the range of 79.4%-109%. The results clearly demonstrate that IL-MMIPs exhibit exceptional recognition and rebinding capabilities. The developed IL-MMIPs-MSPE-HPLC-UV method is straightforward and rapid, making it suitable for the detection and analysis of three kinds of diamide insecticides in environmental water.

Synthesis of in-situ magnetized MOF-cellulose membranes for high-efficiency enrichment of diamide insecticides in vegetables and determination by LC-MS/MS

This study presents a novel, eco-friendly composite adsorbent material designed for the magnetic solid-phase extraction of diamide insecticides from vegetable samples. The membrane, denoted as Fe-MMm, was incorporated with a cellulose framework embedded with Metal-Organic Frameworks (MOFs) and Multi-Walled Carbon Nanotubes (MWCNTs) magnetized with Fe3O4. This innovative material streamlined the conventional solid-phase extraction process, simplifying the sample pre-treatment. By combining it with liquid chromatography tandem mass spectrometry (LC-MS/MS), the method achieves significantly enhanced extraction efficiency through systematic optimization of experimental parameters, including adsorbent selection, pH, ionic strength, adsorption time, and elution time. The method had a wide linear range of 0.1-1000 ng/mL and an exceptionally low detection limit ranging from 0.023 to 0.035 ng/mL. The successful identification of diamide insecticides in vegetable samples underscores the potential of Fe-MMm as a robust material for sample pretreatment in analytical applications.

Optimization of a QuEChERS-LC-MS/MS method for 51 pesticide residues followed by determination of the residue levels and dietary intake risk assessment in foodstuffs

A modified QuEChERS purification-liquid chromatography-tandem mass spectrometry method has been developed to determine 51 pesticide residues with newly established maximum residue limits (MRLs) in foodstuffs. Samples were extracted with acetonitrile under citrate-buffered conditions and purified using a modified QuEChERS method employing hydroxylated MWCNTs, SAX, and C18. The limits of quantification ranged from 0.2 to 9.8 µg/kg. Recoveries in ten different foodstuffs ranged from 70.2% to 117.9%, with relative standard deviations between 2.3% and 19.9% at three spiking levels. This method was applied to analyze 352 market samples, detecting 14 pesticides in 97 samples. Notably, Afidopyropen, cyantraniliprole, and fluxapyroxad residues in vegetables exhibited a consistent pattern of higher levels in the spring and winter and lower levels in the summer and autumn. Moreover, the risk assessments for acute and chronic dietary exposure to the 14 detected pesticides indicated that the %ADI and %ARfD were well below 100%.

Dissipation behavior and dietary risk assessment of cyclaniliprole and its metabolite in cabbage under field conditions

Cyclaniliprole, a novel diamide insecticide, can successfully control Spodoptera litura (Fabricius, 1775) in cabbage. Understanding the residual level of cyclaniliprole in crops and the risk related to its dietary intake is imperative for safe application. Here, we established a simplified, sensitive method for simultaneous analysis of cyclaniliprole and its metabolite NK-1375 (3-bromo-2-((2-bromo-4H-pyrazolo[1,5-d]pyrido[3,2-b]-[1,4]oxazin-4-ylidene)amino)-5-chloro-N-(1-cyclopropylethyl)benzamide) in cabbage by liquid chromatography-tandem mass spectrometry (LC-MS/MS) to investigate their dissipation behavior and residual characteristics. Cyclaniliprole showed rapid dissipation in cabbage and had a half-life of 1.8-2.7 days. The highest residue of total cyclaniliprole (sum of cyclaniliprole and NK-1375) in cabbage from different pre-harvest intervals (3 and 5 days) was 0.25 mg/kg. Our results confirmed the generally low dietary risk quotient of cyclaniliprole (0.243-1.036%) among different age and gender groups in China. Therefore, cyclaniliprole did not pose an unacceptable risk to consumers. This study contributes to setting cyclaniliprole maximum residue limit in cabbage by assessing its dissipation fate and food safety risks.

Chlorantraniliprole in foods: Determination, dissipation and decontamination

Chlorantraniliprole (CAP) is the first commercially available anthranilic diamide insecticide that targets ryanodine receptors. However, excessive use of CAP can lead to persistent contamination on treated foods and adverse effects on human wellness. The current review focuses on CAP residue analysis in foods by using chromatographic techniques. QuEChERS (quick, easy, cheap, effective, rugged and safe) is the most widely used sample preparation strategy and liquid chromatography tandem mass spectrometry is the predominant analytical method for various food matrices including vegetable, fruit, grain, fish and so on. Moreover, this review summarizes the dissipation pattern of CAP on foods and found it usually dissipates fast on plant in open-field environment. For decontamination, common culinary cleaning methods could effectively remove CAP from vegetables. Finally, some new directions are proposed for better advancement.

Automatic Multi-Plug Filtration Cleanup Tip-Filtration with Ultra-Performance Liquid Chromatography/Tandem Mass Spectrometry Detection For 22 Pesticide Residues in Typical Vegetables

An automatic multi-plug filtration cleanup (m-PFC) tip-filtration method was developed to reduce the manual operation workload in sample preparation. In this work, m-PFC was based on multi-walled carbon nanotubes mixed with primary secondary amines and anhydrous magnesium sulfate (MgSO4) in a packed column for analysis of pesticide residues followed by ultra-performance liquid chromatography coupled with tandem mass spectrometry. Method validation was performed on 22 pesticide residues in carrot, spinach and leek, at spiked levels of 5, 10 and 50 μg/kg, respectively. The average recoveries were between 70.1 and 119.5% with associated relative standard deviations <20% (n = 6) indicating satisfactory accuracy and repeatability. Matrix-matched calibration curves were performed with the correlation coefficients (R2) higher than 0.9903 within a linearity range of 5-100 ng/mL. The limits of quantification were 5 μg/kg for all the pesticides in carrot, spinach and leek matrices. The developed method was successfully used to determine pesticide residues in market samples.

Pesticide Residues in Vegetables and Fruits from Farmer Markets and Associated Dietary Risks

The use of pesticides leads to an increase in agricultural production but also causes harmful effects on human health when excessively used. For safe consumption, pesticide residues should be below the maximum residual limits (MRLs). In this study, the residual levels of pesticides in vegetables and fruits collected from farmers' markets in Sharkia Governorate, Egypt were investigated using LC-MS/MS and GC-MS/MS. A total number of 40 pesticides were detected in the tested vegetable and fruit samples. Insecticides were the highest group in detection frequency with 85% and 69% appearance in vegetables and fruits, respectively. Cucumber and apple samples were found to have the highest number of pesticide residues. The mean residue levels ranged from 7 to 951 µg kg-1 (in vegetable samples) and from 8 to 775 µg kg-1 (in fruit samples). It was found that 35 (40.7%) out of 86 pesticide residues detected in vegetables and 35 (38.9%) out of 90 pesticide residues detected in fruits exceeded MRLs. Results for lambda-cyhalothrin, fipronil, dimothoate, and omethoate in spinach, zucchini, kaki, and strawberry, respectively, can cause acute or chronic risks when consumed at 0.1 and 0.2 kg day-1. Therefore, it is necessary for food safety and security to continuously monitor pesticide residues in fruits and vegetables in markets.

Residue and distribution of drip irrigation and spray application of two diamide pesticides in corn and dietary risk assessment for different consumer groups

BACKGROUND

As the use of diamide insecticides on corn continues to increase, there is growing concern about their residue levels on corn and dietary risks to populations. In this study, the distribution, dispersion and transfer efficiency of two diamide insecticides (tetrachlorantraniliprole (TCAP) and cyantraniliprole (CNAP)) in different parts of corn and soil were investigated in a 1-year field trial in Guangzhou and Lanzhou using two different application methods - spray and drip irrigation, respectively - and the dietary risk of the insecticides to different consumer populations was assessed under the two application methods.

RESULTS

The results showed that drip irrigation had a longer persistence period than spraying, and there was a hysteresis in the absorption distribution of the agent in different parts of corn, which was gradually transferred to the leaves after absorption from the roots. The average TE₁ (transfer efficiency) and TE₂ were 0.230-0.261 and 1.749-1.851 for TCAP and 0.168-0.187 and 2.363-2.815 for CNAP, respectively. At corn harvest, both TCAP and CNAP were below detectable levels in soil and corn. For different consumer populations, hazard quotients ranged from 0.001 to 0.066 for TCAP and from 0.003 to 0.568 for CNAP - both well below 100%.

CONCLUSION

This study indicates that TCAP and CNAP applied by spray or drip irrigation are safe for long-term risk of human intake and also provides guidance for the use of both insecticides in agricultural production to control corn pests, especially in arid and semi-arid areas. © 2022 Society of Chemical Industry.

Simultaneous Determination of Seven Pesticides and Metabolite Residues in Litchi and Longan through High-Performance Liquid Chromatography-Tandem Mass Spectrometry with Modified QuEChERS

This study established a QuEChERS high-performance liquid chromatography/tandem triple-quadrupole mass spectrometry method for determining azoxystrobin, pyraclostrobin, picoxystrobin, difenoconazole, chlorantraniliprole, imidacloprid, and cyantraniliprole and its metabolite (IN-J9Z38) in litchi and longan, and applied this method to the real samples. The residues in samples were extracted with acetonitrile and purified with nano-ZrO2, C18, and PSA. The samples were then detected with multireactive ion monitoring and electrospray ionization in the positive ion mode and quantified using the external matrix-matched standard method. The results showed good linearities for the eight analytes in the range of 1−100 μg/L, with correlation coefficients (r2) of >0.99. The limit of quantification was 1−10 μg/kg, and the limit of detection was 0.3−3 μg/kg. Average recovery from litchi and longan was 81−99%, with the relative standard deviation of 3.5−8.4% at fortified concentrations of 1, 10, and 100 μg/kg. The developed method is simple, rapid, efficient, and sensitive. It allowed the rapid screening, monitoring, and confirming of the aforementioned seven pesticides and a metabolite in litchi and longan.

Novel Fluorinated Aniline Anthranilic Diamides Improved Insecticidal Activity Targeting the Ryanodine Receptor

The diamide insecticides show exceptional activity against Lepidoptera insects via activation of ryanodine receptors (RyRs). In the present study, a series of anthranilic diamides containing a fluoroaniline moiety were designed, synthesized, and evaluated for insecticidal potency. Most titled compounds exerted moderate to remarkably high activity against Mythimna separata, Plutella xylostella, and Spodoptera frugiperda. The insecticidal activity of compound II l and II ac against M. separata was 26.7 and 26.7% at 0.1 mg L^-1, respectively, equivalent to that of chlorantraniliprole (0.1 mg L^-1, 30.0%). Compounds II l, II y, and II z exhibited 8.0-, 1.8-, and 4.7-fold higher potency than chlorantraniliprole against P. xylostella, respectively, as compared with their LC₅₀s. Compounds II k and II aa showed good insecticidal activity against S. frugiperda with LC₅₀ of 0.56 and 0.46 mg L^-1, respectively, comparable to that of the commercial insecticide chlorantraniliprole with LC₅₀ of 0.31 mg L^-1. Calcium imaging experiments indicated RyRs as the action target. Molecular docking suggested a higher binding energy of 8.647 kcal/mol between II l and the M. separata RyR than the 7.820 kcal/mol between chlorantraniliprole and the M. separata RyR. Meanwhile, the docking results of II l with mutated P. xylostella RyR at site G4946E showed that II l could have a good inhibition effect on the resistant P. xylostella. The density functional theory calculations suggested the importance of the fluoroaniline moiety in potency. Those novel anthranilic diamides containing a fluorinated aniline moiety are good insecticidal candidates.

Improving Insecticidal Activity of Chlorantraniliprole by Replacing the Chloropyridinyl Moiety with a Substituted Cyanophenyl Group

Insect ryanodine receptors (RyRs) are molecular targets of the anthranilic diamide insecticides. In the present study, a new series of anthranilic diamides containing a cyanophenyl pyrazole moiety were rationally designed by active-fragment assembly and computer-aided design using the 3D structure of Plutella xylostella RyRs as a receptor and chlorantraniliprole as a ligand. Most of the titled compounds showed good toxicity against Mythimna separate, P. xylostella, and Spodoptera frugiperda. Compounds CN06, CN11, and CN16 with corresponding LC₅₀ values of 0.15, 0.29, and 0.52 mg·L^-1, respectively, against M. separate showed comparable activity to that of chlorantraniliprole (0.13 mg·L^-1). Surprisingly, CN06, CN11, and CN16 with corresponding LC₅₀ values of 1.6 × 10^-5, 3.0 × 10^-5, and 2.8 × 10^-5 mg·L^-1, respectively, against P. xylostella were at least 5-fold more active than chlorantraniliprole (1.5 × 10^-4 mg·L^-1). In the case of S. frugiperda, CN06, CN11, and CN16 had good potency but lower than chlorantraniliprole in terms of LC₅₀ values (0.58, 0.54, and 0.56 mg·L^-1 versus 0.31 mg·L^-1). Molecular docking of CN06 and chlorantraniliprole to P. xylostella RyRs validated the molecular design, and the calcium imaging technique further proved the potential target of CN06 as RyRs. Compounds CN06, CN11, and CN16 could be more effective than chlorantraniliprole in targeting the resistant RyR mutants of S. frugiperda (G4891E, I4734M) through the binding mode and energy obtained by molecular docking. Density functional theory calculations (DFT) and electrostatic potential (ESP) studies gave the structure-activity relationship. Compounds CN06, CN11, and CN16 could be used as potent insecticide leads for further optimization.

Simultaneous determination of succinate-dehydrogenase-inhibitor fungicide traces in cereals by QuEChERS preparation and UPLC-MS/MS analysis

A method for the simultaneous determination of 19 succinate dehydrogenase inhibitor (SDHI) fungicide residues in 8 kinds of cereals was established by combining UHPLC-MS/MS with the improved QuEChERS method. MgSO₄ and octadecylsilane (C₁₈) were used as the dispersive-solid phase extraction sorbent. The proposed method had good linearity in the range of 10-100 µg/L with correlation coefficients (R² > 0.99). The limit of quantification of 19 fungicides was 10 µg/L, which is the minimum addition level of the method. The fortified recoveries of 19 SDHI fungicides at three levels were ranged from 79.57 % to 126.25 %. The developed method was utilized for the analysis of 45 real cereal samples, only 5 samples were detected with SDHI fungicides. The contents of the fungicides detected in the real samples are far lower than the MRL. The results indicated that the proposed method is reliable for detecting SDHI fungicides in cereals.

Extraction and determination of flubendiamide insecticide in food samples: A review

Flubendiamide (FBD) is the first commercially available phthalic acid diamide that targets ryanodine receptors (RyRs) in insects, which play a major role in lepidoptera control. However, excessive use of FBD can influence the quality of treated products leading to toxic effects on human health. The availability of rapid and convenient methods for evaluating FBD amount in the environment is necessary. Therefore, analytical methods were developed for the determination of residues of FBD and its metabolite desiodo in different food matrices like tomato, cabbage, pigeon pea, apple, chilli and rice. The current review carries forward methods for FBD residues analysis in foods by using several chromatographic techniques including sample preparation steps. The comparison between the different methods employed for quantitative and qualitative analysis of food quality and safety is also discussed. Liquid chromatography (LC) is the predominant analytical method for assessing the quality of foods treated with FBD. Studies related to LC coupled multichannel detector (Ultraviolet (UV), Mass spectrometry (MS)) are also applied to detect pesticide residues. Extraction and clean up steps are essential to obtain reliable results. Moreover, this review reports the allowed limits of residues for the safety of consuming products treated with FBD.

Enrichment of diamide insecticides from environmental water samples using metal-organic frameworks as adsorbents for determination by liquid chromatography tandem mass spectrometry

A series of metal-organic frameworks composed of different metal ions and organic linkers were facilely synthesized and used as adsorbents for five diamide insecticides for the first time. Among them, MIL-101-NH₂ performed much better than other materials due to extraordinarily high specific surface area, strong water stability, specific interaction with analytes. A sensitive method was developed with MIL-101-NH₂ based dispersive solid phase extraction combining with liquid chromatography tandem mass spectrometry (dSPE-LC-MS/MS). Important parameters including adsorbent amount, enrichment time, elution solvent and volume, pH and salt effect were investigated to achieve the best enrichment efficiency. At selected conditions, the proposed method showed ultrahigh sensitivity with limits of detection low to 0.01-0.03 ng/mL, which was 2-3 orders of magnitude lower than reported methods. Wide linearity in the range of 0.03-1000 ng/mL (chlorantraniliprole, cyantraniliprole) and 0.1-2000 ng/mL (flubendiamide, cyclaniliprole, tetrachlorantraniliprole) were established with satisfactory coefficient of determination. The method was successfully used for analyzing of diamide insecticides in environmental water samples and flubendiamide was detected in several samples. This work demonstrated the first example of developing novel nanomaterials in trace amount diamide insecticide enrichment from practical samples, which opens a new perspective in establishing nanomaterial-based sample preparation method for diamide insecticide analysis.

Determination of new generation amide insecticide residues in complex matrix agricultural food by ultrahigh performance liquid chromatography tandem mass spectrometry

Eight new generation amide insecticide residues analysis by multiwalled carbon nanotubes (MWCNs) cleanup, combined with QuEChERS and ultrahigh performance liquid chromatography tandem mass spectrometry has been developed and successfully applied in complex matrix such as orange, celery, onion, litchi, mango, shallot, chives, avocado, garlic. The matric effect of MWCNs is optimized and compared with ordinary cleanup materials. The results show that the performance of MWCNs is fine and effectively reduce matrix interference. Through chemical structure skeletons analyzed, chlorantraniliprole, bromoantraniliprole, and cyantraniliprole can cause same product ions of m/z 286.0 or 177.1 in the ESI⁺ mode, then tetrachlorantraniliprole and cyclaniliprole can produce collective ions of m/z 146.9 in the ESI^- mode. The coefficients (R²) were greater than 0.9990, the limit of quantification ranges from 0.03 to 0.80 μg/kg, the recovery rate ranges from 71.2 to 120%, and the relative standard deviation (RSD) ranges from 3.8 to 9.4%. The method is fast, simple, sensitive, and suitable for the rapid determination of amide pesticides in complex matrix agricultural food.

Simultaneous determination of spirodiclofen, spiromesifen, and spirotetramat and their relevant metabolites in edible fungi using ultra-performance liquid chromatography/tandem mass spectrometry

A fast, sensitive, and reliable analytical method was developed and validated for simultaneous identification and quantification of spirodiclofen, spiromesifen, and spirotetramat and their relevant metabolites in edible fungi by ultra-performance liquid chromatography/tandem mass spectrometry (UHPLC–MS/MS). First, sample extraction was done with acetonitrile containing 1% formic acid followed by phase separation with the addition of MgSO₄:NaOAc. Then, the supernatant was purified by primary secondary amine (PSA), octadecylsilane (C18), and graphitized carbon black (GCB). The linearities of the calibrations for all analytes were excellent (R² ≥ 0.9953). Acceptable recoveries (74.5–106.4%) for all analytes were obtained with good intra- and inter- relative standard deviations of less than 14.5%. The limit of quantification (LOQs) for all analytes was 10 μg kg⁻¹. For accurate quantification, matrix-matched calibration curve was applied to normalize the matrix effect. The results indicated that the method was suitable for detecting the three acaricides and their relevant metabolites in edible fungi.

Preparative isolation of the major metabolite NK-1375 of diamide insecticide cyclaniliprole and its application to pertinent residue analysis in plant-origin foods using UHPLC-MS/MS

NK-1375 is a major metabolite of the diamide insecticide cyclaniliprole (CYCP) with toxicological significance. It is formed in various transformation pathways of CYCP, including photolysis and plant metabolism. In the present study, NK-1375 was produced employing the liquid-phase photolysis of CYCP followed by isolation using preparative liquid chromatography. The structure of the isolated substance was confirmed using MS and ¹ H NMR spectroscopy, and its purity was measured to be 95.9% using HPLC. As its application, a residue analysis method was first developed for the simultaneous determination of CYCP and NK-1375 in six representative plant-origin foods using fast multi-plug filtration cleanup and UHPLC-MS/MS. Excellent linearity (r > 0.999) was obtained over the calibration range from 0.001 to 0.1 μg mL^-1 . The recoveries (intra-day and inter-day) of CYCP and NK-1375 from different matrices ranged from 74 to 112%, with corresponding relative standard deviations less than 13%. The limits of quantitation of these two compounds were defined at 0.01 mg kg^-1 . This study can be useful for the subsequent analytical or toxicological research on this important pesticide metabolite.

Insights into the structure-performance relationships of extraction materials in sample preparation for chromatography

Sample preparation is one of the most crucial steps in analytical processes. Commonly used methods, including solid-phase extraction, dispersive solid-phase extraction, dispersive magnetic solid-phase extraction, and solid-phase microextraction, greatly depend on the extraction materials. In recent decades, a vast number of materials have been studied and used in sample preparation for chromatography. Due to the unique structural properties, extraction materials significantly improve the performance of extraction devices. Endowing extraction materials with suitable structural properties can shorten the pretreatment process and improve the extraction efficiency and selectivity. To understand the structure-performance relationships of extraction materials, this review systematically summarizes the structural properties, including the pore size, pore shape, pore volume, accessibility of active sites, specific surface area, functional groups and physicochemical properties. The mechanisms by which the structural properties influence the extraction performance are also elucidated in detail. Finally, three principles for the design and synthesis of extraction materials are summarized. This review can provide systematic guidelines for synthesizing extraction materials and preparing extraction devices.

Mechanism of the different metabolome responses between Plutella xylostella and Pieris rapae treated with the diamide insecticides

Diamide insecticides, such as chlorantraniliprole, cyantraniliprole, and tetrachlorantraniliprole, are a new class of insecticides that selectively target insects by affecting calcium homeostasis. While this class of insecticides are effective on a wide range of insect pests, the toxicities of diamide insecticides vary among species and life stages. In this study, we addressed the mechanism underlying the different responses of Plutella xylostella and Pieris rapae to diamide insecticides. The susceptibility to insecticides of P. xylostella and P. rapae larvae was assessed 2 and 4 days after exposure to chlorantraniliprole, cyantraniliprole, and tetrachlorantraniliprole. P. xylostella larvae treated with distilled water (Group A), chlorantraniliprole (Group B), cyantraniliprole (Group C), and tetrachlorantraniliprole (Group D) and P. rapae larvae treated with distilled water (Group E), chlorantraniliprole (Group F), cyantraniliprole (Group G) and tetrachlorantraniliprole (Group H) were subjected to metabolomics analysis. The differential metabolites in the B vs. F, C vs. G, and D vs. H groups were analyzed, followed by pathway enrichment analysis. Chlorantraniliprole, cyantraniliprole, and tetrachlorantraniliprole all showed high toxicities for P. xylostella and P. rapae larvae. P. rapae larvae were more sensitive to the diamide insecticides than P. xylostella larvae. There were 65 overlapped differential metabolites between P. xylostella and P. rapae larvae treated with these three diamide insecticides. Pathway analysis showed that the differential metabolites were closely related with fatty acid biosynthesis and metabolism-related pathways. The differential regulation of fatty acid biosynthesis and metabolism may contribute to the different response to diamide insecticides in P. xylostella and P. rapae.

Synthesis, Insecticidal Activities, and Structure-Activity Relationship of Phenylpyrazole Derivatives Containing a Fluoro-Substituted Benzene Moiety

Fluorinated organic compounds represent a growing and important family of commercial chemicals. Introduction of fluorine into active ingredients has become an effective way to develop modern crop protection products. Given the particular properties of fluorine and high efficiency and selectivity of diamide insecticides, we designed and synthesized 27 anthranilic diamides analogues containing fluoro-sustituted phenylpyrazole. A preliminary bioassay indicated that most target compounds exhibited good biological activity against Mythimna separata and Plutella xylostella. Compound IIIf containing a 2,4,6-trifluoro-substituted benzene ring showed 43% insecticidal activity against M. separata at 0.1 mg L^-1, while the control chlorantraniliprole was 36%. The activity of IIIe against P. xylostella at 10^-5 mg L^-1 was 94%, compared with that of the control being 70%. Thus, introduction of fluorine into diamide insecticides was useful for increasing activity. Insect electrophysiology studies showed that the calcium concentration in the nerve cells of third M. separata larvae was elevated by IIIf, which further confirmed that ryanodine receptor (RyR) was its potential target.

Analytical methods to analyze pesticides and herbicides

This paper reviews studies published in 2019, in the area of analytical techniques for determination of pesticides and herbicides. It should be noted that some of the reports summarized in this review are not directly related to but could potentially be used for water environment studies. Based on different methods, the literatures are organized into six sections, namely extraction methods, electrochemical techniques, spectrophotometric techniques, chemiluminescence and fluorescence methods, chromatographic and mass spectrometric techniques, and biochemical assays. PRACTITIONER POINTS: Totally 141 research articles have been summarized. The review is divided into six parts. Chromatographic and mass spectrometric techniques are the most widely used methods.

Development and validation of a method for the analysis of five diamide insecticides in edible mushrooms using modified QuEChERS and HPLC-MS/MS

In this study, a new method for simultaneous determination of cyantraniliprole, chlorantraniliprole, tetrachlorantraniliprole, cyclaniliprole and flubendiamide in edible mushrooms by high-performance liquid chromatography coupled to tandem mass spectrometry (HPLC-MS/MS) combined with a modified QuEChERS procedure. The samples were extracted using acetonitrile and then cleaned up by primary secondary amine (PSA) and octadecylsilane (C18). The determination of these insecticides was achieved in less than 5 min using an electrospray ionization source in positive mode (ESI+) for cyantraniliprole and chlorantraniliprole, while negative mode (ESI-) for tetrachlorantraniliprole, cyclaniliprole and flubendiamide. The linearities of the calibrations for all target compounds were acceptable (R² ≥ 0.9922). The limits of detection and quantification were 0.05-2 μg kg^-1 and 5 μg kg^-1, respectively. Acceptable recoveries (73.5-110.2%) were acquired for these insecticides with RSDs less than 12.7%. The results demonstrated that the proposed method was effective and convenient for the determination of these insecticides in edible mushrooms.