Solvent Effects on Electronic Excitations of an Organic Chromophore

FC2DES: Modeling 2D Electronic Spectroscopy for Harmonic Hamiltonians

Two-dimensional electronic spectroscopy (2DES) can provide detailed insight into the energy transfer and relaxation dynamics of chromophores by directly measuring the nonlinear response function of the system. However, experiments are often difficult to interpret, and the development of computationally affordable approaches to simulate experimental signals is desirable. For linear spectroscopy, optical spectra of small to medium-sized molecules can be efficiently calculated in the Franck-Condon approach. Approximating the nuclear degrees of freedom as harmonic around the ground- and excited-state minima, closed-form expressions for the exact finite-temperature linear response function can be derived using known solutions for the propagation operator between normal mode coordinate sets, fully accounting for Duschinsky mode-mixing effects. In the present work, we demonstrate that a similar approach can be utilized to yield analogous closed-form expression for the finite-temperature nonlinear (third-order) response function of harmonic nuclear Hamiltonians. The resulting approach, named FC2DES, is implemented on graphics processing units, allowing efficient computations of 2DES signals for medium-sized molecules containing hundreds of normal modes. Benchmark comparisons against the widely used cumulant method for computing 2DES signals are performed on small model systems, as well as the nile red molecule. We highlight the advantages of the FC2DES approach, especially in systems with moderate Duschinsky mode mixing and for long delay times in the nonlinear response function, where low-order cumulant approximations are shown to fail.

Revisiting Artifacts of Kohn-Sham Density Functionals for Biosimulation

We revisit the problem of unphysical charge density delocalization/fractionalization induced by the self-interaction error of common approximate Kohn-Sham (KS) density functional theory functionals on simulation of small to medium-sized proteins in a vacuum. Aside from producing unphysical electron densities and total energies, the vanishing of the HOMO-LUMO gap associated with the unphysical charge delocalization leads to an unphysical low-energy spectrum and catastrophic failure of most popular solvers for the KS self-consistent field (SCF) problem. We apply a robust quasi-Newton SCF solver [ Phys. Chem. Chem. Phys. 2024, 26, 6557] to obtain solutions for some of these difficult cases. The anatomy of the charge delocalization is revealed by the natural deformation orbitals obtained from the density matrix difference between the Hartree-Fock and KS solutions; the charge delocalization not only can occur between charged fragments (such as in zwitterionic polypeptides) but also involves neutral fragments. The vanishing-gap phenomenon and troublesome SCF convergence are both attributed to the unphysical KS Fock operator eigenspectra of molecular fragments (e.g., amino acids or their side chains). Analysis of amino acid pairs suggests that the unphysical charge delocalization can be partially ameliorated by the use of some range-separated hybrid functionals but not by semilocal or standard hybrid functionals. Last, we demonstrate that solutions without the unphysical charge delocalization can be located even for semilocal KS functionals highly prone to such defects, but such solutions have non-Aufbau character and are unstable with respect to mixing of the non-overlapping "frontier" orbitals. Caution should be exercised when unexpectedly small (or vanishing) HOMO-LUMO gaps and atypical SCF convergence patterns (e.g., oscillatory) are observed in KS DFT simulations in any context (bio or otherwise).

First-Principles Modeling of the Absorption Spectrum of Crystal Violet in Solution: The Importance of Environmentally Driven Symmetry Breaking

Theoretical spectroscopy plays a crucial role in understanding the properties of the materials and molecules. One of the most promising methods for computing optical spectra of chromophores embedded in complex environments from the first principles is the cumulant approach, where both (generally anharmonic) vibrational degrees of freedom and environmental interactions are explicitly accounted for. In this work, we verify the capabilities of the cumulant approach in describing the effect of complex environmental interactions on linear absorption spectra by studying Crystal Violet (CV) in different solvents. The experimental absorption spectrum of CV strongly depends on the nature of the solvent, indicating strong coupling to the condensed-phase environment. We demonstrate that these changes in absorption line shape are driven by an increased splitting between absorption bands of two low-lying excited states that is caused by a breaking of the D3 symmetry of the molecule and that in polar solvents, this symmetry breaking is mainly driven by electrostatic interactions with the condensed-phase environment rather than distortion of the structure of the molecule, in contrast with conclusions reached in a number of previous studies. Our results reveal the importance of explicitly including a counterion in the calculations in nonpolar solvents due to electrostatic interactions between CV and the ion. In polar solvents, these interactions are strongly reduced due to solvent screening effects, thus minimizing the symmetry breaking. Computed spectra in methanol are found to be in reasonable agreement with the experiment, demonstrating the strengths of the outlined approach in modeling strong environmental interactions.

Taming the third order cumulant approximation to linear optical spectroscopy

The second order cumulant method offers a promising pathway to predicting optical properties in condensed phase systems. It allows for the computation of linear absorption spectra from excitation energy fluctuations sampled along molecular dynamics (MD) trajectories, fully accounting for vibronic effects, direct solute-solvent interactions, and environmental polarization effects. However, the second order cumulant approximation only guarantees accurate line shapes for energy gap fluctuations obeying Gaussian statistics. A third order correction has recently been derived but often yields unphysical spectra or divergent line shapes for moderately non-Gaussian fluctuations due to the neglect of higher order terms in the cumulant expansion. In this work, we develop a corrected cumulant approach, where the collective effect of neglected higher order contributions is approximately accounted for through a dampening factor applied to the third order cumulant term. We show that this dampening factor can be expressed as a function of the skewness and kurtosis of energy gap fluctuations and can be parameterized from a large set of randomly sampled model Hamiltonians for which exact spectral line shapes are known. This approach is shown to systematically remove unphysical contributions in the form of negative absorbances from cumulant spectra in both model Hamiltonians and condensed phase systems sampled from MD and dramatically improves over the second order cumulant method in describing systems exhibiting Duschinsky mode mixing effects. We successfully apply the approach to the coumarin-153 dye in toluene, obtaining excellent agreement with experiment.

Beyond the Condon limit: Condensed phase optical spectra from atomistic simulations

While dark transitions made bright by molecular motions determine the optoelectronic properties of many materials, simulating such non-Condon effects in condensed phase spectroscopy remains a fundamental challenge. We derive a Gaussian theory to predict and analyze condensed phase optical spectra beyond the Condon limit. Our theory introduces novel quantities that encode how nuclear motions modulate the energy gap and transition dipole of electronic transitions in the form of spectral densities. By formulating the theory through a statistical framework of thermal averages and fluctuations, we circumvent the limitations of widely used microscopically harmonic theories, allowing us to tackle systems with generally anharmonic atomistic interactions and non-Condon fluctuations of arbitrary strength. We show how to calculate these spectral densities using first-principles simulations, capturing realistic molecular interactions and incorporating finite-temperature, disorder, and dynamical effects. Our theory accurately predicts the spectra of systems known to exhibit strong non-Condon effects (phenolate in various solvents) and reveals distinct mechanisms for electronic peak splitting: timescale separation of modes that tune non-Condon effects and spectral interference from correlated energy gap and transition dipole fluctuations. We further introduce analysis tools to identify how intramolecular vibrations, solute-solvent interactions, and environmental polarization effects impact dark transitions. Moreover, we prove an upper bound on the strength of cross correlated energy gap and transition dipole fluctuations, thereby elucidating a simple condition that a system must follow for our theory to accurately predict its spectrum.

Theoretical Advances in Polariton Chemistry and Molecular Cavity Quantum Electrodynamics

When molecules are coupled to an optical cavity, new light-matter hybrid states, so-called polaritons, are formed due to quantum light-matter interactions. With the experimental demonstrations of modifying chemical reactivities by forming polaritons under strong light-matter interactions, theorists have been encouraged to develop new methods to simulate these systems and discover new strategies to tune and control reactions. This review summarizes some of these exciting theoretical advances in polariton chemistry, in methods ranging from the fundamental framework to computational techniques and applications spanning from photochemistry to vibrational strong coupling. Even though the theory of quantum light-matter interactions goes back to the midtwentieth century, the gaps in the knowledge of molecular quantum electrodynamics (QED) have only recently been filled. We review recent advances made in resolving gauge ambiguities, the correct form of different QED Hamiltonians under different gauges, and their connections to various quantum optics models. Then, we review recently developed ab initio QED approaches which can accurately describe polariton states in a realistic molecule-cavity hybrid system. We then discuss applications using these method advancements. We review advancements in polariton photochemistry where the cavity is made resonant to electronic transitions to control molecular nonadiabatic excited state dynamics and enable new photochemical reactivities. When the cavity resonance is tuned to the molecular vibrations instead, ground-state chemical reaction modifications have been demonstrated experimentally, though its mechanistic principle remains unclear. We present some recent theoretical progress in resolving this mystery. Finally, we review the recent advances in understanding the collective coupling regime between light and matter, where many molecules can collectively couple to a single cavity mode or many cavity modes. We also lay out the current challenges in theory to explain the observed experimental results. We hope that this review will serve as a useful document for anyone who wants to become familiar with the context of polariton chemistry and molecular cavity QED and thus significantly benefit the entire community.

State-averaged CASSCF with polarizable continuum model for studying photoreactions in solvents: Energies, analytical nuclear gradients, and non-adiabatic couplings

This paper presents state-averaged complete active space self-consistent field in polarizable continuum model (PCM) for studies of photoreactions in solvents. The wavefunctions of the solute and the PCM surface charges of the solvent are optimized simultaneously such that the state-averaged free energy is variationally minimized. The method supports both fixed weights and dynamic weights where the weights are automatically adjusted based on the energy gaps. The corresponding analytical nuclear gradients and non-adiabatic couplings are also derived. Furthermore, we show how the new method can be entirely formulated in terms of seven basic operations, which allows the implementation to benefit from existing high-performance libraries on graphical processing units. Results demonstrating the accuracy and performance of the implementation are presented and discussed. We also apply the new method to the study of minimal conical intersection search and photoreaction energy pathways in solvents. Effects from the polarity of the solvents and different formulas of dynamic weights are compared and discussed.

Efficiently Computing Excitations of Complex Systems: Linear-Scaling Time-Dependent Embedded Mean-Field Theory in Implicit Solvent

Quantum embedding schemes have the potential to significantly reduce the computational cost of first-principles calculations while maintaining accuracy, particularly for calculations of electronic excitations in complex systems. In this work, I combine time-dependent embedded mean field theory (TD-EMFT) with linear-scaling density functional theory and implicit solvation models, extending previous work within the ONETEP code. This provides a way to perform multilevel calculations of electronic excitations on very large systems, where long-range environmental effects, both quantum and classical in nature, are important. I demonstrate the power of this method by performing simulations on a variety of systems, including a molecular dimer, a chromophore in solution, and a doped molecular crystal. This work paves the way for high accuracy calculations to be performed on large-scale systems that were previously beyond the reach of quantum embedding schemes.

Stressing the differences in alizarin and purpurin dyes through UV-visible light absorption and 1H-NMR spectroscopies

Three anthraquinone-based chromophores (9,10-anthraquinone, alizarin, purpurin) are compared from the point of view of their experimental and computed NMR and UV-visible light absorption spectra. Using an hybrid (explicit/implicit) solvent model,...

The Influence of Electronic Polarization on Nonlinear Optical Spectroscopy

The environment surrounding a chromophore can dramatically affect the energy absorption and relaxation process, as manifested in optical spectra. Simulations of nonlinear optical spectroscopy, such as two-dimensional electronic spectroscopy (2DES) and transient absorption (TA), will be influenced by the computational model of the environment. We here compare a fixed point charge molecular mechanics model and a quantum mechanical (QM) model of the environment in computed 2DES and TA spectra of Nile red in water and the chromophore of photoactive yellow protein (PYP) in water and protein environments. In addition to simulating these nonlinear optical spectra, we directly juxtapose the computed excitation energy correlation function to the dynamic Stokes shift function often used to analyze environment dynamics. Overall, we find that for the three systems studied here the mutual electronic polarization provided by the QM environment manifests in broader 2DES signals, as well as a larger reorganization energy and a larger static Stokes shift due to stronger coupling between the chromophore and the environment.

Thermally Induced Silane Dehydrocoupling: Hydrophobic and Oleophilic Filter Paper Preparation for Water Separation and Removal from Organic Solvents

Organic solvents with high purity are essential in various fields such as optical, electronic, pharmaceutical, and chemical areas to prevent low-quality products or undesired side-products. Constructing methods to remove impurities such as water residue in organic solvents has been a significant challenge. Within this article, we report for the first time a new method for the preparation of hydrophobic and oleophilic filter paper (named OCFP), based on thermally induced silane dehydrocoupling between cellulose-based filter paper and octadecylsilane. We comprehensively characterized OCFP using various characterization techniques (FTIR, XPS, XRD, and EDS). OCFP showed super-hydrophobic and oleophilic properties as well as remarkable water separation and removal efficiency (>93%) in various organic solvents with sustained reusability. In addition, the analytical results both before and after filtration of an NMR solvent using OCFP indicated that OCFP has an excellent solvent drying efficiency. This work presents a new strategy for the development of super-hydrophobic cellulose-based filter paper, which has great potential for solvent drying and water separation.

Accurate and Efficient Computation of Optical Absorption Spectra of Molecular Crystals: The Case of the Polymorphs of ROY

When calculating the optical absorption spectra of molecular crystals from first principles, the influence of the crystalline environment on the excitations is of significant importance. For such systems, however, methods to describe the excitations accurately can be computationally prohibitive due to the relatively large system sizes involved. In this work, we demonstrate a method that allows optical absorption spectra to be computed both efficiently and at high accuracy. Our approach is based on the spectral warping method successfully applied to molecules in solvent. It involves calculating the absorption spectrum of a supercell of the full molecular crystal using semi-local time-dependent density functional theory (TDDFT), before warping the spectrum using a transformation derived from smaller-scale semi-local and hybrid TDDFT calculations on isolated dimers. We demonstrate the power of this method on three polymorphs of the well-known color polymorphic compound ROY and find that it outperforms both small-scale hybrid TDDFT dimer calculations and large-scale semi-local TDDFT supercell calculations, when compared to the experiment.

Modeling Molecular Emitters in Organic Light-Emitting Diodes with the Quantum Mechanical Bespoke Force Field

Combined molecular dynamics (MD) and quantum mechanics (QM) simulation procedures have gained popularity in modeling the spectral properties of functional organic molecules. However, the potential energy surfaces used to propagate long-time scale dynamics in these simulations are typically described using general, transferable force fields designed for organic molecules in their electronic ground states. These force fields do not typically include spectroscopic data in their training, and importantly, there is no general protocol for including changes in geometry or intermolecular interactions with the environment that may occur upon electronic excitation. In this work, we show that parameters tailored for thermally activated delayed fluorescence (TADF) emitters used in organic light-emitting diodes (OLEDs), in both their ground and electronically excited states, can be readily derived from a small number of QM calculations using the QUBEKit (QUantum mechanical BEspoke toolKit) software and improve the overall accuracy of these simulations.

Vibronic and Environmental Effects in Simulations of Optical Spectroscopy

Including both environmental and vibronic effects is important for accurate simulation of optical spectra, but combining these effects remains computationally challenging. We outline two approaches that consider both the explicit atomistic environment and the vibronic transitions. Both phenomena are responsible for spectral shapes in linear spectroscopy and the electronic evolution measured in nonlinear spectroscopy. The first approach utilizes snapshots of chromophore-environment configurations for which chromophore normal modes are determined. We outline various approximations for this static approach that assumes harmonic potentials and ignores dynamic system-environment coupling. The second approach obtains excitation energies for a series of time-correlated snapshots. This dynamic approach relies on the accurate truncation of the cumulant expansion but treats the dynamics of the chromophore and the environment on equal footing. Both approaches show significant potential for making strides toward more accurate optical spectroscopy simulations of complex condensed phase systems.

The vibronic absorption spectra and electronic states of acridine orange in aqueous solution

The time-dependent density functional theory (TD-DFT) was used to obtain vibronic absorption spectra of acridine orange dye (AO) in an aqueous solution that were in good agreement with the experiment. The protonated and neutral forms of the dye have been investigated. The results of calculations using various functionals and basis sets have been analyzed. The best agreement with experiment was given by the level of theory X3LYP/6-31G(d,p). AO molecular orbitals involved in electronic transitions due light absorption in the visible region of the spectrum have been obtained. The dipole moments and atomic charges of the ground and excited states of the AO molecule have been calculated. Maps of the electrostatic potential have been drawn. An insignificant photoinduced electron transfer was found in the central ring of the chromophore of the dye molecule. According to our calculations, the vibronic coupling and the Boltzmann distribution play a significant role in the absorption spectra of the AO.

Explicit environmental and vibronic effects in simulations of linear and nonlinear optical spectroscopy

Accurately simulating the linear and nonlinear electronic spectra of condensed phase systems and accounting for all physical phenomena contributing to spectral line shapes presents a significant challenge. Vibronic transitions can be captured through a harmonic model generated from the normal modes of a chromophore, but it is challenging to also include the effects of specific chromophore-environment interactions within such a model. We work to overcome this limitation by combining approaches to account for both explicit environment interactions and vibronic couplings for simulating both linear and nonlinear optical spectra. We present and show results for three approaches of varying computational cost for combining ensemble sampling of chromophore-environment configurations with Franck-Condon line shapes for simulating linear spectra. We present two analogous approaches for nonlinear spectra. Simulated absorption spectra and two-dimensional electronic spectra (2DES) are presented for the Nile red chromophore in different solvent environments. Employing an average Franck-Condon or 2DES line shape appears to be a promising method for simulating linear and nonlinear spectroscopy for a chromophore in the condensed phase.

Exploiting Machine Learning to Efficiently Predict Multidimensional Optical Spectra in Complex Environments

The excited-state dynamics of chromophores in complex environments determine a range of vital biological and energy capture processes. Time-resolved, multidimensional optical spectroscopies provide a key tool to investigate these processes. Although theory has the potential to decode these spectra in terms of the electronic and atomistic dynamics, the need for large numbers of excited-state electronic structure calculations severely limits first-principles predictions of multidimensional optical spectra for chromophores in the condensed phase. Here, we leverage the locality of chromophore excitations to develop machine learning models to predict the excited-state energy gap of chromophores in complex environments for efficiently constructing linear and multidimensional optical spectra. By analyzing the performance of these models, which span a hierarchy of physical approximations, across a range of chromophore-environment interaction strengths, we provide strategies for the construction of machine learning models that greatly accelerate the calculation of multidimensional optical spectra from first principles.

Nonlinear spectroscopy in the condensed phase: The role of Duschinsky rotations and third order cumulant contributions

First-principles modeling of nonlinear optical spectra in the condensed phase is highly challenging because both environment and vibronic interactions can play a large role in determining spectral shapes and excited state dynamics. Here, we compute two dimensional electronic spectroscopy (2DES) signals based on a cumulant expansion of the energy gap fluctuation operator, with specific focus on analyzing mode mixing effects introduced by the Duschinsky rotation and the role of the third order term in the cumulant expansion for both model and realistic condensed phase systems. We show that for a harmonic model system, the third order cumulant correction captures effects introduced by a mismatch in curvatures of ground and excited state potential energy surfaces, as well as effects of mode mixing. We also demonstrate that 2DES signals can be accurately reconstructed from purely classical correlation functions using quantum correction factors. We then compute nonlinear optical spectra for the Nile red and methylene blue chromophores in solution, assessing the third order cumulant contribution for realistic systems. We show that the third order cumulant correction is strongly dependent on the treatment of the solvent environment, revealing the interplay between environmental polarization and the electronic-vibrational coupling.

The ONETEP linear-scaling density functional theory program

We present an overview of the onetep program for linear-scaling density functional theory (DFT) calculations with large basis set (plane-wave) accuracy on parallel computers. The DFT energy is computed from the density matrix, which is constructed from spatially localized orbitals we call Non-orthogonal Generalized Wannier Functions (NGWFs), expressed in terms of periodic sinc (psinc) functions. During the calculation, both the density matrix and the NGWFs are optimized with localization constraints. By taking advantage of localization, onetep is able to perform calculations including thousands of atoms with computational effort, which scales linearly with the number or atoms. The code has a large and diverse range of capabilities, explored in this paper, including different boundary conditions, various exchange-correlation functionals (with and without exact exchange), finite electronic temperature methods for metallic systems, methods for strongly correlated systems, molecular dynamics, vibrational calculations, time-dependent DFT, electronic transport, core loss spectroscopy, implicit solvation, quantum mechanical (QM)/molecular mechanical and QM-in-QM embedding, density of states calculations, distributed multipole analysis, and methods for partitioning charges and interactions between fragments. Calculations with onetep provide unique insights into large and complex systems that require an accurate atomic-level description, ranging from biomolecular to chemical, to materials, and to physical problems, as we show with a small selection of illustrative examples. onetep has always aimed to be at the cutting edge of method and software developments, and it serves as a platform for developing new methods of electronic structure simulation. We therefore conclude by describing some of the challenges and directions for its future developments and applications.

Systematic microsolvation approach with a cluster-continuum scheme and conformational sampling

Solvation is a notoriously difficult and nagging problem for the rigorous theoretical description of chemistry in the liquid phase. Successes and failures of various approaches ranging from implicit solvation modeling through dielectric continuum embedding and microsolvated quantum chemical modeling to explicit molecular dynamics highlight this situation. Here, we focus on quantum chemical microsolvation and discuss an explicit conformational sampling ansatz to make this approach systematic. For this purpose, we introduce an algorithm for rolling and automated microsolvation of solutes. Our protocol takes conformational sampling and rearrangements in the solvent shell into account. Its reliability is assessed by monitoring the evolution of the spread and average of the observables of interest.

Optical spectra in the condensed phase: Capturing anharmonic and vibronic features using dynamic and static approaches

Simulating optical spectra in the condensed phase remains a challenge for theory due to the need to capture spectral signatures arising from anharmonicity and dynamical effects, such as vibronic progressions and asymmetry. As such, numerous simulation methods have been developed that invoke different approximations and vary in their ability to capture different physical regimes. Here, we use several models of chromophores in the condensed phase and ab initio molecular dynamics simulations to rigorously assess the applicability of methods to simulate optical absorption spectra. Specifically, we focus on the ensemble scheme, which can address anharmonic potential energy surfaces but relies on the applicability of extreme nuclear-electronic time scale separation; the Franck-Condon method, which includes dynamical effects but generally only at the harmonic level; and the recently introduced ensemble zero-temperature Franck-Condon approach, which straddles these limits. We also devote particular attention to the performance of methods derived from a cumulant expansion of the energy gap fluctuations and test the ability to approximate the requisite time correlation functions using classical dynamics with quantum correction factors. These results provide insights as to when these methods are applicable and able to capture the features of condensed phase spectra qualitatively and, in some cases, quantitatively across a range of regimes.

Probing the Solute-Solvent Interaction of an Azo-Bonded Prodrug in Neat and Binary Media: Combined Experimental and Computational Study

Preferential solvation has significant importance in interpreting the molecular physicochemical properties of wide spectrum of materials in solution. In this work, the solute-solvent interaction of pro-drug Sulfasalazine (SSZ) in neat and binary media was investigated experimentally and computationally. The solute-solvent interactions of interest were spectrophotometrically probed and computationally investigated for providing insights concerning the molecular aspects of SSZ:media interaction. Experimentally, the obtained results in 1,4-dioxane:water binary mixture demonstrated a dramatic non-linear changes in the spectral behavior of SSZ indicative of the dependency of its molecular behaviors on the compositions of the molecular microenvironment in the essence of solute-solvent interaction. Computationally, geometry optimization and simulation of the absorption spectra of SSZ in media of interest were performed employing DFT and TD-DFT methods, respectively, where the solvent effects on the absorption were examined implicitly using IEFPCM method. Obtained results revealed a nonpolar nature of the molecular orbitals that are directly involved in the SSZ:medium interaction. As in good correspondence with the experimental results, these simulations demonstrated that these orbitals are of non-polar nature and hence minimally affected by polarity of the media and in turn favoring the non-polar molecular environments. On the other hand, the molecular origin of SSZ:media interaction was demonstrated explicitly through complexation of SSZ with water molecules revealing a cooperative hydrogen bonding stabilization with an average length of 1.90 Å. The findings of this work demonstrate the significance of the preferential solvation and composition of the molecular microenvironment on the physicochemical properties of molecules of pharmaceutical importance.

Unraveling electronic absorption spectra using nuclear quantum effects: Photoactive yellow protein and green fluorescent protein chromophores in water

Many physical phenomena must be accounted for to accurately model solution-phase optical spectral line shapes, from the sampling of chromophore-solvent configurations to the electronic-vibrational transitions leading to vibronic fine structure. Here we thoroughly explore the role of nuclear quantum effects, direct and indirect solvent effects, and vibronic effects in the computation of the optical spectrum of the aqueously solvated anionic chromophores of green fluorescent protein and photoactive yellow protein. By analyzing the chromophore and solvent configurations, the distributions of vertical excitation energies, the absorption spectra computed within the ensemble approach, and the absorption spectra computed within the ensemble plus zero-temperature Franck-Condon approach, we show how solvent, nuclear quantum effects, and vibronic transitions alter the optical absorption spectra. We find that including nuclear quantum effects in the sampling of chromophore-solvent configurations using ab initio path integral molecular dynamics simulations leads to improved spectral shapes through three mechanisms. The three mechanisms that lead to line shape broadening and a better description of the high-energy tail are softening of heavy atom bonds in the chromophore that couple to the optically bright state, widening the distribution of vertical excitation energies from more diverse solvation environments, and redistributing spectral weight from the 0-0 vibronic transition to higher energy vibronic transitions when computing the Franck-Condon spectrum in a frozen solvent pocket. The absorption spectra computed using the combined ensemble plus zero-temperature Franck-Condon approach yield significant improvements in spectral shape and width compared to the spectra computed with the ensemble approach. Using the combined approach with configurations sampled from path integral molecular dynamics trajectories presents a significant step forward in accurately modeling the absorption spectra of aqueously solvated chromophores.

Combining the ensemble and Franck-Condon approaches for calculating spectral shapes of molecules in solution

The correct treatment of vibronic effects is vital for the modeling of absorption spectra of many solvated dyes. Vibronic spectra for small dyes in solution can be easily computed within the Franck-Condon approximation using an implicit solvent model. However, implicit solvent models neglect specific solute-solvent interactions on the electronic excited state. On the other hand, a straightforward way to account for solute-solvent interactions and temperature-dependent broadening is by computing vertical excitation energies obtained from an ensemble of solute-solvent conformations. Ensemble approaches usually do not account for vibronic transitions and thus often produce spectral shapes in poor agreement with experiment. We address these shortcomings by combining zero-temperature vibronic fine structure with vertical excitations computed for a room-temperature ensemble of solute-solvent configurations. In this combined approach, all temperature-dependent broadening is treated classically through the sampling of configurations and quantum mechanical vibronic contributions are included as a zero-temperature correction to each vertical transition. In our calculation of the vertical excitations, significant regions of the solvent environment are treated fully quantum mechanically to account for solute-solvent polarization and charge-transfer. For the Franck-Condon calculations, a small amount of frozen explicit solvent is considered in order to capture solvent effects on the vibronic shape function. We test the proposed method by comparing calculated and experimental absorption spectra of Nile red and the green fluorescent protein chromophore in polar and non-polar solvents. For systems with strong solute-solvent interactions, the combined approach yields significant improvements over the ensemble approach. For systems with weak to moderate solute-solvent interactions, both the high-energy vibronic tail and the width of the spectra are in excellent agreement with experiments.

Predicting solvatochromic shifts and colours of a solvated organic dye: The example of nile red

The solvatochromic shift, as well as the change in colour of the simple organic dye nile red, is studied in two polar and two non-polar solvents in the context of large-scale time-dependent density-functional theory (TDDFT) calculations treating large parts of the solvent environment from first principles. We show that an explicit solvent representation is vital to resolve absorption peak shifts between nile red in n-hexane and toluene, as well as acetone and ethanol. The origin of the failure of implicit solvent models for these solvents is identified as being due to the strong solute-solvent interactions in form of π-stacking and hydrogen bonding in the case of toluene and ethanol. We furthermore demonstrate that the failures of the computationally inexpensive Perdew-Burke-Ernzerhof (PBE) functional in describing some features of the excited state potential energy surface of the S₁ state of nile red can be corrected for in a straightforward fashion, relying only on a small number of calculations making use of more sophisticated range-separated hybrid functionals. The resulting solvatochromic shifts and predicted colours are in excellent agreement with experiment, showing the computational approach outlined in this work to yield very robust predictions of optical properties of dyes in solution.

Chemical Reactivity and Spectroscopy Explored From QM/MM Molecular Dynamics Simulations Using the LIO Code

In this work we present the current advances in the development and the applications of LIO, a lab-made code designed for density functional theory calculations in graphical processing units (GPU), that can be coupled with different classical molecular dynamics engines. This code has been thoroughly optimized to perform efficient molecular dynamics simulations at the QM/MM DFT level, allowing for an exhaustive sampling of the configurational space. Selected examples are presented for the description of chemical reactivity in terms of free energy profiles, and also for the computation of optical properties, such as vibrational and electronic spectra in solvent and protein environments.

Mixed Quantum/Classical Method for Nonadiabatic Quantum Dynamics in Explicit Solvent Models: The ππ*/nπ* Decay of Thymine in Water as a Test Case

We present a novel mixed quantum classical dynamical method to include solvent effects on internal conversion (IC) processes. All the solute degrees of freedom are represented by a wavepacket moving according to nonadiabatic quantum dynamics, while the motion of an explicit solvent model is described by an ensemble of classical trajectories. The mutual coupling of the solute and solvent dynamics is included within a mean-field framework and the quantum and classical equations of motions are solved simultaneously. As a test case we apply our method to the ultrafast ππ* → nπ* decay of thymine in water. Solvent dynamical response modifies IC yield already on the 50 fs time scale. This effect is due to water librational motions that stabilize the most populated state. Pure static disorder, that is, the existence of different solvent configurations when photoexcitation takes place, also has a remarkable impact on the dynamics.

Spin-paired solvated electron couples in alkali–ammonia systems

Diamagnetism, color of and hydrogen evolution from not too diluted solvated electrons in alkali–ammonia systems are explained with ammoniated electron lone pairs.

Distance dependent photoacoustics revealed through DNA nanostructures

Molecular rulers that rely on the Förster resonance energy transfer (FRET) mechanism are widely used to investigate dynamic molecular processes that occur on the nanometer scale. However, the capabilities of these fluorescence molecular rulers are fundamentally limited to shallow imaging depths by light scattering in biological samples. Photoacoustic tomography (PAT) has recently emerged as a high resolution modality for in vivo imaging, coupling optical excitation with ultrasound detection. In this paper, we report the capability of PAT to probe distance-dependent FRET at centimeter depths. Using DNA nanotechnology we created several nanostructures with precisely positioned fluorophore-quencher pairs over a range of nanoscale separation distances. PAT of the DNA nanostructures showed distance-dependent photoacoustic signal enhancement and demonstrated the ability of PAT to reveal the FRET process deep within tissue mimicking phantoms. Further, we experimentally validated these DNA nanostructures as a novel and biocompatible strategy to augment the intrinsic photoacoustic signal generation capabilities of small molecule fluorescent dyes.

Charge transfer in time-dependent density functional theory

Charge transfer plays a crucial role in many processes of interest in physics, chemistry, and bio-chemistry. In many applications the size of the systems involved calls for time-dependent density functional theory (TDDFT) to be used in their computational modeling, due to its unprecedented balance between accuracy and efficiency. However, although exact in principle, in practise approximations must be made for the exchange-correlation functional in this theory, and the standard functional approximations perform poorly for excitations which have a long-range charge-transfer component. Intense progress has been made in developing more sophisticated functionals for this problem, which we review. We point out an essential difference between the properties of the exchange-correlation kernel needed for an accurate description of charge-transfer between open-shell fragments and between closed-shell fragments. We then turn to charge-transfer dynamics, which, in contrast to the excitation problem, is a highly non-equilibrium, non-perturbative, process involving a transfer of one full electron in space. This turns out to be a much more challenging problem for TDDFT functionals. We describe dynamical step and peak features in the exact functional evolving over time, that are missing in the functionals currently used. The latter underestimate the amount of charge transferred and manifest a spurious shift in the charge transfer resonance position. We discuss some explicit examples.

Unravelling the Roles of Size, Ligands, and Pressure in the Piezochromic Properties of CdS Nanocrystals

Understanding the effects of pressure-induced deformations on the optoelectronic properties of nanomaterials is important not only from the fundamental point of view but also for potential applications such as stress sensors and electromechanical devices. Here, we describe the novel insights into these piezochromic effects gained from using a linear-scaling density functional theory framework and an electronic enthalpy scheme, which allow us to accurately characterize the electronic structure of CdS nanocrystals with a zincblende-like core of experimentally relevant size. In particular, we focus on unravelling the complex interplay of size and surface (phenyl) ligands with pressure. We show that pressure-induced deformations are not simple isotropic scaling of the original structures and that the change in HOMO-LUMO gap with pressure results from two competing factors: (i) a bulk-like linear increase due to compression, which is offset by (ii) distortions and disorder and, to a lesser extent, orbital hybridization induced by ligands affecting the frontier orbitals. Moreover, we observe that the main peak in the optical absorption spectra is systematically red-shifted or blue-shifted, as pressure is increased up to 5 GPa, depending on the presence or absence of phenyl ligands. These heavily hybridize the frontier orbitals, causing a reduction in overlap and oscillator strength, so that at zero pressure, the lowest energy transition involves deeper hole orbitals than in the case of hydrogen-capped nanocrystals; the application of pressure induces greater delocalization over the whole nanocrystals bringing the frontier hole orbitals into play and resulting in an unexpected red shift for the phenyl-capped nanocrystals, in part caused by distortions. In response to a growing interest in relatively small nanocrystals that can be difficult to accurately characterize with experimental techniques, this work exemplifies the detailed understanding of structure-property relationships under pressure that can be obtained for realistic nanocrystals with state-of-the-art first-principles methods and used for the characterization and design of devices based on these and similar nanomaterials.

Applications of large-scale density functional theory in biology

Density functional theory (DFT) has become a routine tool for the computation of electronic structure in the physics, materials and chemistry fields. Yet the application of traditional DFT to problems in the biological sciences is hindered, to a large extent, by the unfavourable scaling of the computational effort with system size. Here, we review some of the major software and functionality advances that enable insightful electronic structure calculations to be performed on systems comprising many thousands of atoms. We describe some of the early applications of large-scale DFT to the computation of the electronic properties and structure of biomolecules, as well as to paradigmatic problems in enzymology, metalloproteins, photosynthesis and computer-aided drug design. With this review, we hope to demonstrate that first principles modelling of biological structure-function relationships are approaching a reality.