Visible-Light Photocatalytic Synthesis of Amines from Imines via Transfer Hydrogenation Using Quantum Dots as Catalysts

Quantum Dot Interface-Enabled Cross-Coupling Acylation by Direct Aldehyde Activation under Visible Light

Cross-coupling acylation by direct aldehyde activation is ideal to construct a useful carbonyl motif. However, the strong C-H bond energy, short radical lifetime, and mismatched radical polarity render this reaction a huge challenge. Herein, the semiconductor quantum dots (QDs) interface is demonstrated to overcome the obstacles lying on the way to acylating alkene or alkylarene, directly activating the formyl C-H bond into an acyl radical. Further stabilization of the obtained radical species by the QD interface ensured their effective cross-coupling with the generated intermediate from the coupling partner. The interface of QDs was exemplified to execute photochemical transformation, showcasing a highly efficient and selective cross-coupling acylation reaction under extremely mild conditions.

Visible-Light-Induced Imine Hydrogenation Catalyzed by Thioxanthone-TfOH Complex

Amino compounds are important molecules, commonly found in nature and widely applied in industrial production. Recently, photocatalysis has been discovered as an efficient method to synthesize amino compounds by promoting imine hydrogenation. In this work, a strategy of imine hydrogenation catalyzed by 2e- consecutive photoinduced electron transfer (ConPET) process of thioxanthone-TfOH complex (9-HTXTF) was thoroughly investigated with its reaction conditions optimized, substrate scope examined, and reaction mechanism elucidated, which provides an efficient method for synthesizing amino compounds.

Emerging Opportunities of Colloidal Quantum Dots for Photocatalytic Organic Transformations

Colloidal quantum dots (QDs) have emerged as a versatile photocatalyst for a wide range of photocatalytic transformations owing to its high absorption coefficient, large surface-to-volume ratio, high stability, and efficient charge and energy transfer dynamics. The past decades have witnessed a rapid development of QDs for artificial photocatalysis. In this review, the unique characteristics of QDs are focused on, including quantum size effect, compositional and structural diversity, tunable surface chemistry, and photophysics, that can be utilized for photocatalytic transformations. The recent advancements in photocatalytic organic transformations enabled by QDs photocatalysts are summarized. The unique opportunities of QDs are highlighted to tackle organic reactions that are previously unattainable with small molecule photocatalysts. Lastly, an outlook is provided for future directions in this field.

Electricity-driven organic hydrogenation using water as the hydrogen source

Hydrogenation is a pivotal process in organic synthesis and various catalytic strategies have been developed in achieving effective hydrogenation of diverse substrates. Despite the competence of these methods, the predominant reliance on molecular hydrogen (H2) gas under high temperature and elevated pressure presents operational challenges. Other alternative hydrogen sources such as inorganic hydrides and organic acids are often prohibitively expensive, limiting their practical utility on a large scale. In contrast, employing water as a hydrogen source for organic hydrogenation presents an attractive and sustainable alternative, promising to overcome the drawbacks associated with traditional hydrogen sources. Integrated with electricity as the sole driving force under ambient conditions, hydrogenation using water as the sole hydrogen source aligns well with the environmental sustainability goals but also offers a safer and potentially more cost-effective solution. This article starts with the discussion on the inherent advantages and limitations of conventional hydrogen sources compared to water in hydrogenation reactions, followed by the introduction of representative electrocatalytic systems that successfully utilize water as the hydrogen source in realizing a large number of organic hydrogenation transformations, with a focus on heterogeneous electrocatalysts. In summary, transitioning to water as a hydrogen source in organic hydrogenation represents a promising direction for sustainable chemistry. In particular, by exploring and optimizing electrocatalytic hydrogenation systems, the chemical industry can reduce its reliance on hazardous and expensive hydrogen sources, paving the way for safer, greener, and less energy-intensive hydrogenation processes.

Synthesis of Indolines via Base-Mediated C-H Activation and Defluorinative C-N Coupling, with no Need for Transition-Metals

Syntheses of (partially) aromatic nitrogen heterocycles increasingly rely on transition-metal catalyzed C-C- and C-N-cross-coupling reactions. Here we describe a different approach to the synthesis of indolines by a domino C(sp3)-H activation, 1,2-addition, and defluorinative SNAr-cyclization sequence to provide the target 1,2-diarylindolines (1,2-diaryl-2,3-dihydroindoles) from ortho-fluorinated methyl-arenes and N-aryl imines (benzylidene anilines) in a cyclocondensation that is mediated by potassium hexamethyldisilazide (KHMDS) as base exclusively. This transition-metal-free process via C-H and C-F bond activation provides a one-step entry into a wide array of indoline scaffolds (43 examples, up to 96 % yield). This privileged substructure is common in natural products and pharmaceuticals alike, and cannot be accessed by traditional condensation reactions.

Charge Transfer from Quantum-Confined 0D, 1D, and 2D Nanocrystals

The properties of colloidal quantum-confined semiconductor nanocrystals (NCs), including zero-dimensional (0D) quantum dots, 1D nanorods, 2D nanoplatelets, and their heterostructures, can be tuned through their size, dimensionality, and material composition. In their photovoltaic and photocatalytic applications, a key step is to generate spatially separated and long-lived electrons and holes by interfacial charge transfer. These charge transfer properties have been extensively studied recently, which is the subject of this Review. The Review starts with a summary of the electronic structure and optical properties of 0D-2D nanocrystals, followed by the advances in wave function engineering, a novel way to control the spatial distribution of electrons and holes, through their size, dimension, and composition. It discusses the dependence of NC charge transfer on various parameters and the development of the Auger-assisted charge transfer model. Recent advances in understanding multiple exciton generation, decay, and dissociation are also discussed, with an emphasis on multiple carrier transfer. Finally, the applications of nanocrystal-based systems for photocatalysis are reviewed, focusing on the photodriven charge separation and recombination processes that dictate the function and performance of these materials. The Review ends with a summary and outlook of key remaining challenges and promising future directions in the field.

Photocatalytic Three-Component Reaction for the Synthesis of Multifunctional Diaryl Sulfides

A photocatalytic three-component reaction of a nitroarene, a thiophenol, and a ketone for the synthesis of multifunctional diaryl sulfides was reported using a nitro group as the nitrogen source and thiophenol as the sulfur source. Thiophenol also serves as a proton donor to reduce nitroarene to arylamine as a key intermediate for the formation of C-N and C-S bonds. Good functional group tolerance and mild reaction conditions make this method have practical synthetic value for diversified multifunctional diaryl sulfides.

Visible-light induced cross-electrophile coupling of imines and anhydrides to synthesize α-amino ketones

α-Amino ketones are important motifs in synthetic and medicinal chemistry. Efficient methods to directly access these motifs from feasible precursors are, however, limited. Herein, a visible-light mediated reductive cross-electrophile coupling of readily available imines and anhydrides was developed. Under mild reaction conditions, the umpolung reactivity of diverse imines engaged with anhydrides gives a variety of α-amino ketones with good yields and a broad functional group compatibility. Primary mechanistic studies revealed that this transformation might proceed through a radical-radical cross coupling pathway dominantly.

Recent Advances in C-H Functionalisation through Indirect Hydrogen Atom Transfer

The functionalisation of C-H bonds has been an enormous achievement in synthetic methodology, enabling new retrosynthetic disconnections and affording simple synthetic equivalents for synthons. Hydrogen atom transfer (HAT) is a key method for forming alkyl radicals from C-H substrates. Classic reactions, including the Barton nitrite ester reaction and Hofmann-Löffler-Freytag reaction, among others, provided early examples of HAT. However, recent developments in photoredox catalysis and electrochemistry have made HAT a powerful synthetic tool capable of introducing a wide range of functional groups into C-H bonds. Moreover, greater mechanistic insights into HAT have stimulated the development of increasingly site-selective protocols. Site-selectivity can be achieved through the tuning of electron density at certain C-H bonds using additives, a judicious choice of HAT reagent, and a solvent system. Herein, we describe the latest methods for functionalizing C-H/Si-H/Ge-H bonds using indirect HAT between 2018-2023, as well as a critical discussion of new HAT reagents, mechanistic aspects, substrate scopes, and background contexts of the protocols.

Effect of a redox-mediating ligand shell on photocatalysis by CdS quantum dots

Semiconductor quantum dots (QDs) are efficient organic photoredox catalysts due to their high extinction coefficients and easily tunable band edge potentials. Despite the majority of the surface being covered by ligands, our understanding of the effect of the ligand shell on organic photocatalysis is limited to steric effects. We hypothesize that we can increase the activity of QD photocatalysts by designing a ligand shell with targeted electronic properties, namely, redox-mediating ligands. Herein, we functionalize our QDs with hole-mediating ferrocene (Fc) derivative ligands and perform a reaction where the slow step is hole transfer from QD to substrate. Surprisingly, we find that a hole-shuttling Fc inhibits catalysis, but confers much greater stability to the catalyst by preventing a build-up of destructive holes. We also find that dynamically bound Fc ligands can promote catalysis by surface exchange and creation of a more permeable ligand shell. Finally, we find that trapping the electron on a ligand dramatically increases the rate of reaction. These results have major implications for understanding the rate-limiting processes for charge transfer from QDs and the role of the ligand shell in modulating it.

Linker-Assisted CdS-TiO2 Nanohybrids as Reusable Visible Light Photocatalysts for the Oxidative Hydroxylation of Arylboronic Acids

A variety of phenols have been obtained in aqueous media with moderate to excellent chemical yields (≤100%) by using arylboronic acids and esters as substrates, a robust CdS-TiO₂ nanohybrid as a heterogeneous photocatalyst, visible light irradiation (467 nm), and an O₂-saturated atmosphere. The nanohybrid was prepared through a linker-assisted methodology that uses mercapto alkanoic acids as the organic linkers. The nanohybrid showed improved photocatalytic activity in the hydroxylation of substituted arylboronic acids and phenyl boronic esters compared with that of pristine CdS quantum dots. The nanohybrid can be reused in up to five photocatalytic cycles with ∼90% of its outstanding activity preserved.

Photoredox Promoted Barbier-Type Reaction of Alkyl Iodides with N-Alkyl and N-Aryl Imines

The reaction of organozinc reagents with unactivated imines is accelerated when performed in the presence of a photocatalyst under blue light irradiation. Coordination between Lewis acidic zinc iodide and the imine is a key factor responsible for the reaction efficiency. The method can be carried out using alkyl iodides under Barbier conditions.

Visible-light induced three-component reaction for α-aminobutyronitrile synthesis by C-C bond formation using quantum dots as photocatalysts

We describe a three-component reaction of malononitrile, benzaldehyde and N,N-dimethylaniline using aluminium doped CdSeS/CdZnSeS(Al)/ZnS quantum dots (QDs) as visible light catalysts to synthesize α-aminobutyrilitriles at room temperature and under mild conditions. The reactions exhibit high functional group tolerance, and the well dispersed quantum dot catalysts are highly efficient with a turnover number (TON) greater than 1.1 × 10³ and can be recycled at least three times without significant loss of catalytic activity.

Quantum dot gels as efficient and unique photocatalysts for organic synthesis

Here we report CdS quantum dot (QD) gels as highly efficient and unique photocatalysts for organic synthesis. We found that the photocatalytic activity of CdS QD gel was superior to phosphine oxide- and thiolate-capped CdS QDs for dehalogenation and α-amine arylation reactions because of the high accessibility of its surface sites to the substrates. In addition, we discovered the unique reactivity of CdS QD gel for ring-opening during α-amine arylation of tetrahydroisoquinoline via the reductive cleavage of C-N bonds. QD gels provide new opportunities in photocatalysis due to their unique surface interactions with the substrates or intermediates.

CdS Quantum Dots as Potent Photoreductants for Organic Chemistry Enabled by Auger Processes

Strong reducing agents (<-2.0 V vs saturated calomel electrode (SCE)) enable a wide array of useful organic chemistry, but suffer from a variety of limitations. Stoichiometric metallic reductants such as alkali metals and SmI₂ are commonly employed for these reactions; however, considerations including expense, ease of use, safety, and waste generation limit the practicality of these methods. Recent approaches utilizing energy from multiple photons or electron-primed photoredox catalysis have accessed reduction potentials equivalent to Li⁰ and shown how this enables selective transformations of aryl chlorides via aryl radicals. However, in some cases, low stability of catalytic intermediates can limit turnover numbers. Herein, we report the ability of CdS nanocrystal quantum dots (QDs) to function as strong photoreductants and present evidence that a highly reducing electron is generated from two consecutive photoexcitations of CdS QDs with intermediate reductive quenching. Mechanistic experiments suggest that Auger recombination, a photophysical phenomenon known to occur in photoexcited anionic QDs, generates transient thermally excited electrons to enable the observed reductions. Using blue light-emitting diodes (LEDs) and sacrificial amine reductants, aryl chlorides and phosphate esters with reduction potentials up to -3.4 V vs SCE are photoreductively cleaved to afford hydrodefunctionalized or functionalized products. In contrast to small-molecule catalysts, QDs are stable under these conditions and turnover numbers up to 47 500 have been achieved. These conditions can also effect other challenging reductions, such as tosylate protecting group removal from amines, debenzylation of benzyl-protected alcohols, and reductive ring opening of cyclopropane carboxylic acid derivatives.

Synthesis, properties and catalysis of quantum dots in C–C and C-heteroatom bond formations

Luminescent quantum dots (QDs) represent a new form of carbon nanomaterials which have gained widespread attention in recent years, especially in the area of chemical sensing, bioimaging, nanomedicine, solar cells, light-emitting diode (LED), and electrocatalysis. Their extremely small size renders some unusual properties such as quantum confinement effects, good surface binding properties, high surface‐to‐volume ratios, broad and intense absorption spectra in the visible region, optical and electronic properties different from those of bulk materials. Apart from, during the past few years, QDs offer new and versatile ways to serve as photocatalysts in organic synthesis. Quantum dots (QD) have band gaps that could be nicely controlled by a number of factors in a complicated way, mentioned in the article. Processing, structure, properties and applications are also reviewed for semiconducting quantum dots. Overall, this review aims to summarize the recent innovative applications of QD or its modified nanohybrid as efficient, robust, photoassisted redox catalysts in C–C and C-heteroatom bond forming reactions. The recent structural modifications of QD or its core structure in the development of new synthetic methodologies are also highlighted. Following a primer on the structure, properties, and bio-functionalization of QDs, herein selected examples of QD as a recoverable sustainable nanocatalyst in various green media are embodied for future reference.

Photochemical and Electrochemical Applications of Proton-Coupled Electron Transfer in Organic Synthesis

We present here a review of the photochemical and electrochemical applications of multi-site proton-coupled electron transfer (MS-PCET) in organic synthesis. MS-PCETs are redox mechanisms in which both an electron and a proton are exchanged together, often in a concerted elementary step. As such, MS-PCET can function as a non-classical mechanism for homolytic bond activation, providing opportunities to generate synthetically useful free radical intermediates directly from a wide variety of common organic functional groups. We present an introduction to MS-PCET and a practitioner's guide to reaction design, with an emphasis on the unique energetic and selectivity features that are characteristic of this reaction class. We then present chapters on oxidative N-H, O-H, S-H, and C-H bond homolysis methods, for the generation of the corresponding neutral radical species. Then, chapters for reductive PCET activations involving carbonyl, imine, other X═Y π-systems, and heteroarenes, where neutral ketyl, α-amino, and heteroarene-derived radicals can be generated. Finally, we present chapters on the applications of MS-PCET in asymmetric catalysis and in materials and device applications. Within each chapter, we subdivide by the functional group undergoing homolysis, and thereafter by the type of transformation being promoted. Methods published prior to the end of December 2020 are presented.

High-efficiency visible-light photocatalytic H2O2 production using CdSe-based core/shell quantum dots

Quantum dots are demonstrated as photocatalysts for high-efficiency photocatalytic production of H2O2 in a designed oil/water two-phase system.

Tropylium Salt-Promoted Vinylogous Aza-Michael Addition of Carbamates to para-Quinone Methides: Elaboration to Diastereomerically Pure α,α'-Diarylmethyl Carbamates

Carbocation catalysis is emerging as an important subarea of Lewis acid catalysis. Some stable and isolable carbocations have been successfully utilized as Lewis acid catalysts and promoters in many synthetic transformations. In this manuscript, we report a tropylium cation-promoted vinylogous aza-Michael addition of carbamates to para-quinone methides (QMs) to access a wide range of unsymmetrical α,α'-diarylmethyl carbamates. This mild protocol was effective for the vinylogous conjugate addition of (-)-menthyl carbamate to p-QMs, and the respective diastereomerically pure α,α'-diarylmethyl carbamate derivatives could be obtained in excellent yields and diastereoselectivities (up to >20:1 de).

Quantum Dot Photocatalysts for Organic Transformations

Quantum dots (QDs) with tunable photo-optical properties and colloidal nature are ideal for a wide range of photocatalytic reactions. In particular, QD photocatalysts for organic transformations can provide new and effective synthetic routes to high value-added molecules under mild conditions. In this Perspective, we discuss the advances of employing QDs for visible-light-driven organic transformations categorized into net reductive reactions, net oxidative reactions, and redox neutral reactions. We then provide our outlook for potential future directions in the field: nanostructure engineering to improve charge separation efficiencies, ligand shell engineering to optimize overall catalyst performance, in situ comprehensive studies to delineate underlying reaction mechanisms, and laboratory automation with the assistance of modern computing techniques to revolutionize the reaction optimization process.

Light-Mediated Polymerization Induced by Semiconducting Nanomaterials: State-of-the-Art and Future Perspectives

Direct capture of solar energy for chemical transformation via photocatalysis proves to be a cost-effective and energy-saving approach to construct organic compounds. With the recent growth in photosynthesis, photopolymerization has been established as a robust strategy for the production of specialty polymers with complex structures, precise molecular weight, and narrow dispersity. A key challenge in photopolymerization is the scarcity of effective photomediators (photoinitiators, photocatalysts, etc.) that can provide polymerization with high yield and well-defined polymer products. Current efforts on developing photomediators have mainly focused on organic dyes and metal complexes. On the other hand, nanomaterials (NMs), particularly semiconducting nanomaterials (SNMs), are suitable candidates for photochemical reactions due to their unique optical and electrical properties, such as high absorption coefficients, large charge diffusion lengths, and broad absorption spectra. This review provides a comprehensive insight into SNMs' photomediated polymerizations and highlights the roles SNMs play in photopolymerizations, types of polymerizations, applications in producing advanced materials, and the future directions.

Visible-Light-Mediated Oxidative Amidation of Aldehydes by Using Magnetic CdS Quantum Dots as a Photocatalyst

A magnetic CdS quantum dot (Fe₃ O₄ /polydopamine (PDA)/CdS) was synthesized through a facile and convenient method from inexpensive starting materials. Characterization of the prepared catalyst was performed by means of FTIR spectroscopy, XRD, SEM, TEM, energy-dispersive X-ray spectroscopy, and vibrating-sample magnetometer techniques. Fe₃ O₄ /PDA/CdS was found to be a highly active photocatalyst for the amidation of aromatic aldehydes by using air as a clean oxidant under mild conditions. The photocatalyst can be recovered by magnetic separation and successfully reused for five cycles without considerable loss of its catalytic activity.

Advances in Homogeneous Photocatalytic Organic Synthesis with Colloidal Quantum Dots

Colloidal semiconductor quantum dots (QDs) have been proven to be excellent photocatalysts due to their high photostability, large extinction coefficients, and tunable optoelectrical properties, and have attracted extensive attention by synthetic chemists. These excellent properties demonstrate its promise in the field of photocatalysis. In this review, we summarize the recent application of QDs as homogeneous catalysts in various photocatalytic organic reactions. These meaningful works in organic transformations show the unique catalytic activity of quantum dots, which are different from other semiconductors.

Visible Light Induced Reduction and Pinacol Coupling of Aldehydes and Ketones Catalyzed by Core/Shell Quantum Dots

We present an efficient and versatile visible light-driven methodology to transform aryl aldehydes and ketones chemoselectively either to alcohols or to pinacol products with CdSe/CdS core/shell quantum dots as photocatalysts. Thiophenols were used as proton and hydrogen atom donors and as hole traps for the excited quantum dots (QDs) in these reactions. The two products can be switched from one to the other simply by changing the amount of thiophenol in the reaction system. The core/shell QD catalysts are highly efficient with a turn over number (TON) larger than 4 × 10⁴ and 4 × 10⁵ for the reduction to alcohol and pinacol formation, respectively, and are very stable so that they can be recycled for at least 10 times in the reactions without significant loss of catalytic activity. The additional advantages of this method include good functional group tolerance, mild reaction conditions, the allowance of selectively reducing aldehydes in the presence of ketones, and easiness for large scale reactions. Reaction mechanisms were studied by quenching experiments and a radical capture experiment, and the reasons for the switchover of the reaction pathways upon the change of reaction conditions are provided.

Distinctive reactivity of N-benzylidene-[1,1'-biphenyl]-2-amines under photoredox conditions

A simple photocatalytic method was developed for the synthesis of unsymmetrical 1,2-diamines by the unprecedented reductive coupling of N-benzylidene-[1,1'-biphenyl]-2-amines with an aliphatic amine. The presence of a phenyl substituent in the aniline moiety of the substrate was critical for the reactivity. The reaction proceeded via radical–radical cross-coupling of α-amino radicals generated by proton-coupled single-electron transfer in the presence of an Ir photocatalyst. On the other hand, symmetrical 1,2-diamines were selectively produced from the same starting materials by the judicious choice of the reaction conditions, showcasing the distinct reactivity of N-benzylidene-[1,1'-biphenyl]-2-amines. The developed method can be employed for the synthesis of various bulky vicinal diamines, which are potential ligands in stereoselective synthesis.

Crucial Effect of Ti-H Species Generated in the Visible-Light-Driven Transformations: Slowed-Down Proton-Coupled Electron Transfer

Despite the fact that proton-coupled electron transfer (PCET) has been hypothesized to play a pivotal role in the power conversion efficiency (PCE) of TiO₂-based solar-energy applications, the specific relationship between the intrinsic nature of visible-light (Vis)-driven PCET reactions and limited PCE gains has not yet been well revealed. Here we studied the detailed kinetics of reactions between various alcohols and radicals (^tBu₃ArO^•/TEMPO) on a TiO₂ photocatalyst under dye-sensitization Vis irradiation versus direct ultraviolet (UV) irradiation. We found that the rates of Vis-driven reactions were much slower than those of UV-driven reactions under identical light intensity. A similar phenomenon was observed under the off-line dark-reaction conditions in which TiO₂ was prereduced by alcohols. The rapid formation and difficult breakage of the stable "Ti-H" intermediate were proposed to account for the slowed-down PCET effect. This finding revealed an inherent bottleneck in Vis-driven energy conversion applications.

α-Functionalization of Imines via Visible Light Photoredox Catalysis

The innate electrophilicity of imine building blocks has been exploited in organic synthetic chemistry for decades. Inspired by the resurgence in photocatalysis, imine reactivity has now been redesigned through the generation of unconventional and versatile radical intermediates under mild reaction conditions. While novel photocatalytic approaches have broadened the range and applicability of conventional radical additions to imine acceptors, the possibility to use these imines as latent nucleophiles via single-electron reduction has also been uncovered. Thus, multiple research programs have converged on this issue, delivering creative and practical strategies to achieve racemic and asymmetric α-functionalizations of imines under visible light photoredox catalysis.

Vilsmeier–Haack reagent mediated synthetic transformations with an immobilized iridium complex photoredox catalyst

The synthesis of amides, nitriles, and anhydrides via reactions under the action of the visible-light-driven in situ generated Vilsmeier–Haack reagent from CBr₄ in DMF.

Understanding the role of thermodynamics in catalytic imine reductions

The past decade has witnessed a booming growth of research activity in catalytic imine reduction, due to the ongoing motivation to find more efficient conversions of the rather unreactive C[double bond, length as m-dash]N bonds to the desired C-N segments found in many pharmaceuticals. While several timely reviews have well documented various C[double bond, length as m-dash]N reduction methodologies with respect to the type of catalyst (acid, base, or transition metal), a detailed discussion of the core role of thermodynamic driving forces in governing these catalyses is still lacking, however. Hence, this tutorial review describes some of the most practical considerations for adjusting reduction thermodynamics by choosing appropriate catalytic strategies, in order to make the target reduction energetically feasible. The combined use of relevant thermodynamic parameters of the substrate imines, hydrogen donors, and catalysts in realizing such a goal is demonstrated on the basis of the energetics of the possible elementary paths. Experimental observations from the literature that are in line with the present energetics-based analyses are exemplified.