Boosting Hydrazine Oxidation Reaction on CoP/Co Mott-Schottky Electrocatalyst through Engineering Active Sites

Engineering cobalt phosphide with anion vacancy and carbon shell for kinetically enhanced lithium-sulfur batteries

The widespread adoption of lithium-Sulfur (Li-S) batteries is significantly hindered by the well-known "shuttle effect" and the sluggish conversion kinetics of sulfur species. In this study, cobalt phosphide (CoP) nanoparticles are engineered with phosphorus vacancies (Pv) and a carbon shell (CoPv@C) to effectively anchor polysulfides (LiPSs) and promote their conversion. The introduction of Pv notably enhances the binding energy between CoP and LiPSs, facilitating the subsequent cleavage of the SS bond in the Li2S6 molecule. The carbon shell further aids in the chemical adsorption of LiPSs by generating a space charge region, while simultaneously shielding CoP nanoparticles from direct exposure to oxidative conditions during charge/discharge cycles. On the surface of CoPv@C nanofibers, the nucleation of Li2S exhibits rapid liquid-solid conversion dynamics, adhering to a three-dimensional progressive nucleation model. Consequently, in our case, Li-S batteries assembled with CoPv@C-modified separators exhibit an initial capacity of 1,536 mAh g-1 at 0.1 C. Significantly, Li-S batteries can afford 4 C discharge/charge along with a superior 0.019 % decline rate. These findings position CoPv@C nanofibers as a promising material for advanced Li-S batteries and offer novel insights into the design of electrocatalysts and separator engineering for high-performance Li-S batteries.

Co9S8/CoTe2 n-n Type Heterojunction: A Heterogenic Interfacial Integration of Co9S8 and CoTe2 Phases for Energy-Efficient Hydrazine Oxidation Assisted Hydrogen Production

Controlled and optimized heterogenic interfacial coupling is the key to enhance the electrochemical performance. Herein, for the first time, telluride-based Co9S8/CoTe2 heterostructure is reported as a bifunctional catalyst for energy-efficient H2 generation. Detailed investigations suggest that the heterogenic interfacial coupling leads to superior bifunctional electrochemical performance of the Co9S8/CoTe2 heterostructure. Furthermore, it displays excellent hydrazine oxidation reaction (HzOR) performance at industrial-level current density (500 mA cm-2 @ 338 mV) using an electrochemically neutral carbon paper substrate. The overall hydrazine electrooxidation-assisted water splitting (OHzWS) cell performance of the Co9S8/CoTe2 heterostructure couple is 10 mA cm-2 @ 0.22 V, which is 1.60 V less than the conventional overall water splitting. Band energy profiles of Co9S8/CoTe2 heterostructure reveal an n-n type heterojunction formation between Co9S8 and CoTe2 phases. The work function difference between the phases results in an impulsive electron flow from the CoTe2 to the Co9S8 phase and the creation of a built-in electric field. This prompts the electrochemical kinetics of HzOR and hydrogen evolution reaction (HER) by enabling faster charge transport at the interface. Furthermore, DFT supports the experimental findings, and Gibbs's free energy profile for HzOR studies indicate that the Co9S8/CoTe2 heterostructure interface is favorable for HzOR compared to Co9S8 and CoTe2.

Vanadium-regulated nickel phosphide nanosheets for electrocatalytic sulfion upgrading and hydrogen production

The electrochemical sulfion oxidation reaction (SOR) is highly desirable to treat sulfion-rich wastewater and achieve energy-saving hydrogen production when coupled with the cathodic hydrogen evolution reaction (HER). Herein, we propose a thermodynamically favorable SOR to couple with the HER, and develop vanadium-doped nickel phosphide (V-Ni2P) nanosheets for simultaneously achieving energy-efficient hydrogen production and sulfur recovery. V doping can efficiently adjust the electronic structure and improve intrinsic activity of Ni2P, which exhibits outstanding electrocatalytic performances for the HER and SOR with low potentials of -0.093 and 0.313 V to afford 10 mA cm-2. Remarkably, the assembled V-Ni2P-based hybrid water electrolyzer coupling the HER with the SOR requires small cell voltages of 0.389 and 0.834 V at 10 and 300 mA cm-2, lower than those required in a traditional water electrolysis system (1.5 and 1.969 V), realizing low-cost sulfion upgrading to value-added sulfur and hydrogen generation. This work provides an approach for energy-saving hydrogen production and toxic waste degradation.

3D-Printed Hierarchical Nanostructured N-Co2NiO4 NF Electrode for Efficient Concurrent Electrocatalytic Production of Hydrogen and Formate

Replacing the oxygen evolution reaction with the alternative glycerol electro-oxidation reaction (GER) provides a promising strategy to enhance the efficiency of hydrogen production via water electrolysis while co-generating high-value chemicals. However, obtaining low-cost and efficient GER electrocatalysts remains a big challenge. Herein, a self-supported N-doped Co2NiO4 nanoflakes (N-Co2NiO4 NF) is proposed for efficient electrocatalytic oxidation of glycerol to formate. The synergistic effect induced by the interaction of the layered Co2NiO4 nanostructures on the 3D-printed Nickel-Yttria-stabilized zirconia (Ni-YSZ) substrate and the amorphous nitrogen-doping promotes the anodic GER. The N-Co2NiO4 NF exhibits low potentials of 1.07 and 1.18 V (vs. RHE) for GER to drive 10 and 50 mA cm-2, respectively. The constituted two-electrode electrolyzer (N-Co2NiO4 NF//NiS-Co-NiP) displays excellent activity that only requires ultralow cell voltages of 1.24 and 1.55 V to afford 10 and 200 mA cm-2, respectively, with a high FE (97%) for formate production and an excellent durability (120 h). This study provides a versatile approach for manufacturing high-performance Ni-based electrocatalyst for GER, paving the way for the energy-saving and environmentally-friendly co-production of value-added chemicals and hydrogen.

Electrospun Micro/Nanofiber-Based Electrocatalysts for Hydrogen Evolution Reaction: A Review

Hydrogen is regarded as an ideal energy carrier to cope with the energy crisis and environmental problems due to its high energy density, cleanliness, and renewability. Although there are several primary methods of industrial hydrogen production, hydrogen evolution reaction (HER) is an efficient, eco-friendly, and sustainably green method for the preparation of hydrogen which has attracted considerable attention. However, this technique is characterized by slow reaction kinetics and high energy potential owing to lack of electrocatalysts with cost-effective and high performance which impedes its scale-up. To address this issue, various studies have focused on electrospun micro/nanofiber-based electrocatalysts for HER due to their excellent electron and mass transport, high specific surface area, as well as high porosity and flexibility. To further advance their development, recent progress of highly efficient HER electrospun electrocatalysts is reviewed. Initially, the characteristics of potential high-performance electrocatalysts for HER are elucidated. Subsequently, the advantages of utilizing electrospinning technology for the preparation of electrocatalysts are summarized. Then, the classification of electrospun micro/nanofiber-based electrocatalysts for HER are analyzed, including metal-based electrospun electrocatalyst (noble metals and alloys, transition metals, and alloys), metal-non-metal electrocatalysts (metal sulfide-based electrocatalysts, metal oxide-based electrocatalysts, metal phosphide-based electrocatalysts, metal nitride-based electrocatalysts, and metal carbide-based electrocatalysts), metal-free electrospun micro/nanofiber-based electrocatalysts, and hybrid electrospun micro/nanofiber-based electrocatalysts. Following this, enhancement strategies for electrospun micro/nanofiber-based electrocatalysts are discussed. Finally, current challenges and the future research directions of electrospun micro/nanofiber-based electrocatalysts for HER are concluded.

Unraveling the Oxidation Kinetics Through Electronic Structure Regulation of MnCo2O4.5@Ni3S2 p-n Junction for Urea-Assisted Electrocatalytic Activity

A promising strategy to boost electrocatalytic performance is via assembly of hetero-nanostructured electrocatalysts that delivers the essential specific surface area and also active sites by lowering the reaction barrier. However, the challenges associated with the intricate designs and mechanisms remain underexplored. Therefore, the present study constructs a p-n junction in a free-standing MnCo2O4.5@Ni3S2 on Ni-Foam. The space-charge region's electrical characteristics is dramatically altered by the formed p-n junction, which enhances the electron transfer process for urea-assisted electrocatalytic water splitting (UOR). The optimal MnCo2O4.5@Ni3S2 electrocatalyst results in greater oxygen evolution reactivity (OER) than pure systems, delivering an overpotential of only 240 mV. Remarkably, upon employing as UOR electrode the required potential decreases to 30 mV. The impressive performance of the designed catalyst is attributed to the enhanced electrical conductivity, greater number of electrochemical active sites, and improved redox activity due to the junction interface formed between p-MnCo2O4.5 and n-Ni3S2. There are strong indications that the in situ formed extreme-surface NiOOH, starting from Ni3S2, boosts the electrocatalytic activity, i.e., the electrochemical  surface reconstruction generates the active species. In conclusion, this work presents a high-performance p-n junction design for broad use, together with a viable and affordable UOR electrocatalyst.

Constructing Ru-O-TM Bridge in NiFe-LDH Enables High Current Hydrazine-assisted H2 Production

Hydrazine oxidation-assisted water splitting is a critical technology to tackle the high energy consumption in large-scale H2 production. Ru-based electrocatalysts hold promise for synergetic hydrogen reduction (HER) and hydrazine oxidation (HzOR) catalysis but are hindered by excessive superficial adsorption of reactant intermediate. Herein, this work designs Ru cluster anchoring on NiFe-LDH (denoted as Ruc/NiFe-LDH), which effectively enhances the intermediate adsorption capacity of Ru by constructing Ru─O─Ni/Fe bridges. Notably, it achieves an industrial current density of 1 A cm-2 at an unprecedentedly low voltage of 0.43 V, saving 3.94 kWh m-3 H2 in energy, and exhibits remarkable stability over 120 h at a high current density of 5 A cm-2. Advanced characterizations and theoretical calculation reveal that the presence of Ru─O─Ni/Fe bridges widens the d-band width (Wd) of the Ru cluster, leading to a lower d-band center and higher electron occupation on antibonding orbitals, thereby facilitating moderate adsorption energy and enhanced catalytic activity of Ru.

A macroporous carbon nanoframe for hosting Mott-Schottky Fe-Co/Mo2C sites as an outstanding bi-functional oxygen electrocatalyst

Simultaneously optimizing the d-band center of the catalyst and the mass/charge transport processes during the oxygen catalytic reaction is an essential but arduous task in the pursuit of creating effective and long-lasting bifunctional oxygen catalysts. In this study, a Fe-Co/Mo2C@N-doped carbon macroporous nanoframe was successfully synthesized via a facile "conformal coating and coordination capture" pyrolysis strategy. As expected, the resulting heterogeneous electrocatalyst exhibited excellent reversible oxygen electrocatalytic performance in an alkaline medium, as demonstrated by the small potential gap of 0.635 V between the operating potential of 1.507 V at 10 mA cm-2 for the oxygen evolution reaction and the half-wave potential of 0.872 V towards the oxygen reduction reaction. Additionally, the developed Zn-air battery employing the macroporous nanoframe heterostructure displayed an impressive peak power density of 218 mW cm-2, a noteworthy specific capacity of 694 mA h gZn-1, and remarkable charging/discharging cycle durability. Theoretical calculations confirmed that the built-in electric field between the Fe-Co alloy and Mo2C semiconductor could induce advantageous charge transport and redistribution at the heterointerface, contributing to the optimization of the d-band center of the nanohybrid and ultimately leading to a reduction in the reaction energy barrier during catalytic processes. The exquisite macroporous nanoframe facilitated the rapid transport of ions and charges, as well as the smooth access of oxygen to the internal active site. Thus, the presented unique electronic structure regulation and macroporous structure design show promising potential for the development of robust bifunctional oxygen electrodes.

Lattice Strain Engineering of Ni2 P Enables Efficient Catalytic Hydrazine Oxidation-Assisted Hydrogen Production

Hydrazine-assisted water electrolysis provides new opportunities to enable energy-saving hydrogen production while solving the issue of hydrazine pollution. Here, the synthesis of compressively strained Ni2 P as a bifunctional electrocatalyst for boosting both the anodic hydrazine oxidation reaction (HzOR) and cathodic hydrogen evolution reaction (HER) is reported. Different from a multistep synthetic method that induces lattice strain by creating core-shell structures, a facile strategy is developed to tune the strain of Ni2 P via dual-cation co-doping. The obtained Ni2 P with a compressive strain of -3.62% exhibits significantly enhanced activity for both the HzOR and HER than counterparts with tensile strain and without strain. Consequently, the optimized Ni2 P delivers current densities of 10 and 100 mA cm-2 at small cell voltages of 0.16 and 0.39 V for hydrazine-assisted water electrolysis, respectively. Density functional theory (DFT) calculations reveal that the compressive strain promotes water dissociation and concurrently tunes the adsorption strength of hydrogen intermediates, thereby facilitating the HER process on Ni2 P. As for the HzOR, the compressive strain reduces the energy barrier of the potential-determining step for the dehydrogenation of *N2 H4 to *N2 H3 . Clearly, this work paves a facile pathway to the synthesis of lattice-strained electrocatalysts via the dual-cation co-doping.

eHydrogenation: Hydrogen-free Electrochemical Hydrogenation

Hydrogenation reactions are staple transformations commonly used across scientific fields to synthesise pharmaceuticals, natural products, and various functional materials. However, the vast majority of these reactions require the use of a toxic and costly catalyst leading to unpractical, hazardous and often functionally limited conditions. Herein, we report a new, general, practical, efficient, mild and high-yielding hydrogen-free electrochemical method for the reduction of alkene, alkyne, nitro and azido groups. Finally, this method has been applied to deuterium labelling.

Synthesis of the Ni2P-Co Mott-Schottky Junction as an Electrocatalyst to Boost Sulfur Conversion Kinetics and Application in Separator Modification in Li-S Batteries

To overcome the shuttling effect and sluggish conversion kinetics of polysulfides, a large number of catalysts have been designed for lithium-sulfur (Li-S) batteries. Herein, a Mott-Schottky junction catalyst composed of Co nanoparticles and Ni₂P was designed to improve polysulfide kinetics. Our investigations reveal the rearrangement of charges at the Schottky junction interface and the construction of the built-in electric field are crucial for lowering the activation energy of the dissolved Li₂S_n reduction and Li₂S nucleation reaction. Furthermore, a series of experimental and electrochemical tests were performed to demonstrate that the Schottky catalytic effect enhanced the synergistic catalytic effect. With a Ni₂P-Co@CNT catalyst, the battery exhibits an initial specific capacity of 874 mAh g^-1 at a rate of 4.0 C, and the decay rate per cycle is 0.049% in 700 cycles. Meanwhile, the battery shows 0.118% decay rate per cycle at 0.5 C in 100 cycles at a high sulfur loading of 10 mg cm^-2. The Schottky heterojunction structure proposed here has been shown to have a good catalytic effect on the reduction of Li₂S_n and nucleation of Li₂S, which provides a profound guidance for efficient and rational catalyst design.

Design of the Synergistic Rectifying Interfaces in Mott-Schottky Catalysts

The functions of interfacial synergy in heterojunction catalysts are diverse and powerful, providing a route to solve many difficulties in energy conversion and organic synthesis. Among heterojunction-based catalysts, the Mott-Schottky catalysts composed of a metal-semiconductor heterojunction with predictable and designable interfacial synergy are rising stars of next-generation catalysts. We review the concept of Mott-Schottky catalysts and discuss their applications in various realms of catalysis. In particular, the design of a Mott-Schottky catalyst provides a feasible strategy to boost energy conversion and chemical synthesis processes, even allowing realization of novel catalytic functions such as enhanced redox activity, Lewis acid-base pairs, and electron donor-acceptor couples for dealing with the current problems in catalysis for energy conversion and storage. This review focuses on the synthesis, assembly, and characterization of Schottky heterojunctions for photocatalysis, electrocatalysis, and organic synthesis. The proposed design principles, including the importance of constructing stable and clean interfaces, tuning work function differences, and preparing exposable interfacial structures for designing electronic interfaces, will provide a reference for the development of all heterojunction-type catalysts, electrodes, energy conversion/storage devices, and even super absorbers, which are currently topics of interest in fields such as electrocatalysis, fuel cells, CO₂ reduction, and wastewater treatment.

Nickel-induced charge redistribution in Ni-Fe/Fe3C@nitrogen-doped carbon nanocage as a robust Mott-Schottky bi-functional oxygen catalyst for rechargeable Zn-air battery

Designing earth-abundant and advanced bi-functional oxygen electrodes for efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are extremely urgent but still ambiguous. Thus, metal-semiconductor nanohybrids were developed with functionally integrating ORR-active Ni species, OER-active Fe/Fe₃C components, and multifunctional N-doped carbon (NDC) support. Expectantly, the resulted NDC nanocage embedded with Ni-Fe alloy and Fe₃C particles, as assembled Mott-Schottky-typed catalyst, delivered a promoted half-wave potential of 0.904 V for ORR and a low overpotential of 315 mV at 10 mA/cm² for OER both in alkaline media, outperforming those of commercial Pt/C and RuO₂ counterparts. Most importantly, the optimized Ni-Fe/Fe₃C@NDC sample also afforded a peak power density of 267.5 mW/cm² with a specific capacity of 773.8 mAh/g_Zn and excellent durability over 80 h when used as the air electrode in rechargeable Zn-air batteries, superior to the state-of-the-art bi-functional catalysts. Ultraviolet photoelectron spectroscopy revealed that the introduction of Ni into the Fe/Fe₃C@NDC component could well manipulate the electronic structure of the designed electrocatalyst, leading to an effective built-in electric field established by the Mott-Schottky heterojunction to expedite the continuous interfacial charge-transfer and thus significantly promote the utilization of electrocatalytic active sites. Therefore, this work provides an avenue for the designing and developing robust and durable Mott-Schottky-typed bi-functional catalysts for promising energy conversion.

Manipulation of Mott-Schottky Ni/CeO2 Heterojunctions into N-Doped Carbon Nanofibers for High-Efficiency Electrochemical Water Splitting

Designing affordable and efficient bifunctional electrocatalysts for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has remained a long-lasting target for the progressing hydrogen economy. Utilization of metal/semiconductor interface effect has been lately established as a viable implementation to realize the favorable electrocatalytic performance due to the built-in electric field. Herein, a typical Mott-Schottky electrocatalyst by immobilizing Ni/CeO₂ hetero-nanoparticles onto N-doped carbon nanofibers (abbreviated as Ni/CeO₂ @N-CNFs hereafter) has been developed via a feasible electrospinning-carbonization tactic. Experimental findings and theoretic calculations substantiate that the elaborated constructed Ni/CeO₂ heterojunction effectively triggers the self-driven charge transfer on heterointerfaces, leading to the promoted charge transfer rate, the optimized chemisorption energies for reaction intermediates and ultimately the expedited reaction kinetics. Therefore, the well-designed Ni/CeO₂ @N-CNFs deliver superior HER and OER catalytic activities with overpotentials of 100 and 230 mV at 10 mA cm^-2 , respectively, in alkaline solution. Furthermore, the Ni/CeO₂ @N-CNFs-equipped electrolyzer also exhibits a low cell voltage of 1.56 V to attain 10 mA cm^-2 and impressive long-term durability over 55 h. The innovative manipulation of electronic modulation via Mott-Schottky establishment may inspire the future development of economical electrocatalysts for diverse sustainable energy systems.

Cobalt-modified palladium nanocatalyst on nitrogen-doped reduced graphene oxide for direct hydrazine fuel cell

Nitrogen-doped reduced graphene oxide-supported palladium-cobalt nanoparticles (PdCo NPs/NrGO NSs) are synthesized and used as a high-performance and low-cost anodic catalyst for direct hydrazine-hydrogen peroxide fuel cells. The SEM and TEM images of PdCo NPs/NrGO NSs show the uniform metal nanoparticle distribution on the NrGO NSs. The reduction of the oxygen functional groups and the doping of the nitrogen atoms in the GO framework are confirmed by FT-IR and XRD spectroscopic studies. The Pd catalysts modified by Co exhibit a higher catalytic activity, lower onset potential, better durability, and lower impedance values than unmodified Pd catalysts for the electro-oxidation of hydrazine. The kinetic studies show a first-order reaction with an activation energy of 12.51 kJ mol-1. A direct hydrazine-hydrogen peroxide fuel cell with PdCo NPs/NrGO NSs as anode and Pt/C as cathode provides an open circuit voltage of 1.76 V and a maximum power density of 148.58 mW cm-2 at 60 °C, indicating that the PdCo NPs/NrGO NSs are an economical, high performance and reliable anode catalyst for the direct hydrazine-hydrogen peroxide fuel cell.

Ultrathin NiSe Nanosheets on Ni Foam for Efficient and Durable Hydrazine-Assisted Electrolytic Hydrogen Production

Hydrazine-assisted electrochemical water splitting is an important avenue toward low cost and sustainable hydrogen production. An efficient and stable bifunctional electrocatalyst for the hydrogen evolution reaction (HER) and the anodic hydrazine oxidation reaction (HzOR) is fundamental to this goal. Herein, we employed a facile method to fabricate ultrathin NiSe nanosheet arrays on nickel foam (NiSe/NF), which exhibits predominant electrocatalytic activity for both HER and HzOR. Our investigations revealed that the excellent electrocatalytic activity of the NiSe/NF mainly arises from the abundant electrocatalytic active sites endowed by the ultrathin nanosheet morphology, the rugged feature of the extended (100) nanosheet surface, the rich presence of Se on the nanosheet surface, and the three-dimensional (3D) porous structure of the NF and other factors such as high conductivity of the NiSe/NF and strong NiSe-NF adhesion. We assembled a hydrazine-boosted electrochemical water splitting cell using NiSe/NF as a bifunctional catalyst for both of the electrodes, and the constructed cell exhibits an ultralow overpotential (310 mV at 10 mA cm^-2), which is robust for 30 h continuous electrolysis in a 1 M KOH electrolyte. This work provides a promising avenue toward low cost, high-efficiency, and stable hydrogen production based on hydrazine-assisted electrolytic water splitting for future.