NiFe Layered Double Hydroxide (LDH) Nanosheet Catalysts with Fe as Electron Transfer Mediator for Enhanced Persulfate Activation

A superior catalyst for ozone decomposition: NiFe layered double hydroxide

Ground-level ozone is harmful to human beings and ecosystems, while room-temperature catalytic decomposition is the most effective technology for ozone abatement. However, solving the deactivation of existing metal oxide catalysts was caused by oxygen-containing intermediates is challenging. Here, we successfully prepared a two-dimensional NiFe layered double hydroxide (NiFe-LDH) catalyst via a facile co-precipitation method, which exhibited stable and highly efficient performance of ozone decomposition under harsh operating conditions (high space velocity and humidity). The NiFe-LDH catalyst with Ni/Fe = 3 and crystallization time over 5 hr (named Ni3Fe-5) exhibited the best catalytic performance, which was well beyond that of most existing manganese-based oxide catalysts. Specifically, under relative humidity of 65% and space velocity of 840 L/(g·hr), Ni3Fe-5 showed ozone conversion of 89% and 76% for 40 ppmV of O3 within 6 and 168 hr at room-temperature, respectively. We demonstrated that the layered structure of NiFe-LDH played a decisive role in its outstanding catalytic performance in terms of both activity and water resistance. The LDH catalysts fundamentally avoids the deactivation caused by the occupancy of oxygen vacancies by oxygen-containing species (H2O, O-, and O2-) in manganese-based oxide. This study indicated the promising application potential of LDHs than manganese-based oxide catalysts in removal of gaseous ozone.

GQD@NiFe-LDH Nanosheets for Photocatalytic Activity towards Textile Dye Degradation via Lattice Contraction

The functionalized NiFe-LDH with photosensitized GQDs were synthesized through the hydrothermal route by differing the amount of GQDs solution and studied its efficacy towards the mineralization of textile dyes under visible light. The synthesized samples were characterized by XRD, FESEM, HRTEM, DRUV-Vis, RAMAN, XPS, and BET. The combined effect of the hexagonal carbon lattice in GQD and open layered porous structure of NiFe-LDH nanosheets results in the contraction of the lattice. Different reactive and conventional dyes were taken as representative dyes to evaluate the activity of the as-synthesized photocatalysts. The enhanced electron absorption/donor effect between GQDs and NiFe-LDH, and the growth of oxygen-bridged Ni/Fe-C moieties enable the composite to exhibit better photocatalytic activity. Both photocatalytic activity and characterization results confirmed that the GQD@NiFe-LDH nanocomposite heterostructure synthesized at 160 °C by taking 10 mL of GQDs aqueous solution named GNFLDH10 has a higher degree of crystallinity and has the best photocatalytic efficiency compared to other reported visible light catalysts. Specifically, the above optimized GQD@NiFe-LDH photocatalyst is capable of photo-mineralizing 50 ppm of Reactive Green in 20 min, Reactive Red in 20 min, and Congo Red in 25 min respectively following a direct Z-scheme mechanism with substantial reusability.

Construction of efficient Ni-FeLDH@MWCNT@Cellulose acetate floatable microbeads for Cr(VI) removal: Performance and mechanism

Water pollution is an aggravating dilemma that is extending around the world, threatening human survival. Strikingly, the notorious heavy metals like hexavalent chromium ions (Cr⁶⁺) cause environmental problems raising awareness of the essentials for finding feasible solutions. For this purpose, the self-floating Ni-FeLDH@MWCNT@CA microbeads were prepared for removing Cr⁶⁺. The morphological, thermal, and composition characteristics of Ni-FeLDH@MWCNT@CA microbeads were analyzed using XRD, FTIR, TGA, SEM, XPS, and zeta potential. Notably, the adsorption aptitude of Cr⁶⁺ was enhanced by raising the MWCNTs proportion to 5 wt% in microbeads. The Cr⁶⁺ adsorption onto Ni-FeLDH@MWCNT@CA fitted Langmuir and Freundlich isotherm models with q_m of 384.62 mg/g at pH 3 and 298 K. The adsorption process was described kinetically by the pseudo-2nd order model. More importantly, the adsorption of Cr⁶⁺ onto Ni-FeLDH@MWCNT@CA occurred via electrostatic interactions, inner/outer sphere complexations, ion exchange, and reduction mechanisms. Besides, the cycling test showed the remarkable reusability of Ni-FeLDH@MWCNT@CA floatable microbeads for five subsequent cycles. The self-floating Ni-FeLDH@MWCNT@CA microbeads in this work provide essential support for the potential applications for the remediation of heavy metals-containing wastewater.

Enhanced non-radical activation of persulfate with pompon-like NiO microspheres for removing sulfamethoxazole in water

The development of efficient heterogeneous catalyst for non-radical activation of persulfate (PS) is highly desired for removing organic pollutants in water. Herein, four NiO samples were prepared by different methods, and their performance for PS activation was investigated using sulfamethoxazole (SMX) as the target pollutant. The structure, surface chemical state, and redox ability of these samples were measured by various characterization techniques, and the key property affecting PS activation efficiency was explored. The results showed that the degradation of SMX by these samples all followed the non-radical mechanism, and the activated PS was the dominant active species. Among them, pompon-like NiO microspheres exhibited the highest activity due to its large surface area and especially high oxidation ability. Catalyst with high oxidation ability or reducing ability should facilitate the non-radical or radical activation of PS, respectively. SMX was completely removed by pompon-like NiO microspheres within 10 min, and the reaction rate constant was calculated to be 0.4199 min-1. An adsorption-degradation experiment was designed to verify the high stability and oxidation potential of the adsorbed PS on NiO surface. Pompon-like NiO microspheres exhibited good reusability, and its performance was barely affected by water quality, demonstrating its potential application in water treatment.

Different crystallographic Ni(OH)2 as highly efficient Fenton-like catalysts for sulfate radical activation

By a simple hydrothermal method, a phase boundary between α- and β-Ni(OH)₂ can be obtained. The Fenton-like performance of α@β-Ni(OH)₂ is 1.56 times higher than that of single β-Ni(OH). α@β-Ni(OH)₂ displays superior stability compared to α-Ni(OH)₂, β-Ni(OH)₂, and amorphous Ni(OH)₂, which makes significant contributions to developing advanced catalysts in diverse fields.

Enhanced activation of persulfate improves the selective oxidation of alcohols catalyzed by earth-abundant metal oxides embedded on porous N-doped carbon derived from chitosan

Metal clusters oxide were embedded in an N-doped carbon and used as catalysts for the activation of peroxydisulfate or peroxymonosulfate in the selective oxidation of benzyl alcohol. Quenching tests were done to investigate the reaction mechanism.

Activation of persulfate via Mn doped Mg/Al layered double hydroxide for effective degradation of organics: Insights from chemical and structural variability of catalyst

Considerable interest has been focusing on the activation of peroxydisulfate (PDS) by layered double hydroxide (LDH) for degradation of organic pollutants. However, understanding the structure and chemistry of LDH by which the activation of PDS could achieve a high degradation efficiency of organic compounds is an unsolved and fundamental question in advanced oxidation processes (AOPs), and one which, if harnessed, could enable the rational design of LDH with desired material properties. In this work, Mg/Al-LDH was synthesized with variable structures and compositions through doping different proportions of Mn²⁺. We advanced to understand this question of how LDH by these characteristics can affect the activation of PDS for degradation of organic pollutants. At a relatively low dosage of Mn (˂ 1%) in Mg/Al-LDH, the degradation rate of phenol by LDH activated PDS increased with the increase content of Mn, which was achieved by an increase of catalytic sites in Mg/Al-LDH interlayer. Rather, higher content of Mn (˃ 1%) significantly lowered the degradation performance of phenol as the decrease of interlayer space resulted in reduction of PDS intercalation in LDH and the formation of secondary Mn-related minerals (i.e., Mn₃O₄) led to meaningless consumption of PDS. Finally, the degradation of phenol by LDH activated PDS followed a non-radical (¹O₂) mechanism. Our ability to quantify how the chemical and structural variability of LDH influence the activation of PDS for organic degradation could mark an important step toward synthesis strategies for advanced catalysts.

Structure and release properties of pyrethroid/sulfobutyl ether β-cyclodextrin intercalated into layered double hydroxide and layered hydroxide salt

The aim of this study was to realize the intercalation of the pyrethroid pesticides beta-cypermethrin (BCT) and lambda-cyhalothrin (LCT) into ZnAl-layered double hydroxides (LDH) and NiZn-layered hydroxide salt (LHS). BCT (LCT)/SBECD-LDH and BCT (LCT)/SBECD-LHS hybrids were obtained with the aid of sulfobutyl ether β-cyclodextrin (SBECD) through one step method. The hybrids were characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and thermogravimetry and differential thermal analysis (TGA/DTA). The hybrids based on LHS had larger basal spacing than those on LDH. The LDH-hybrids prepared in N-methylpyrrolidone (NMP) had larger basal spacing than those in ethanol. These results were discussed in terms of the matrix structure and solvent properties. The supramolecular structure of the hybrid was reasonably proposed. Furthermore, the release properties of BCT (LCT) from the hybrids were investigated and discussed in two media. The release rate in pH = 5.0 was slower than that in pH = 6.8. The accumulated release amount of pesticide in pH = 5.0 was lower than that in pH = 6.8. LHS-hybrids synthesized in ethanol exhibit a sustainable release property. These depend on the inclusion complexes’ arrangement and release medium. The release kinetic processes could be described by pseudo-second order and parabolic diffusion models. The release behavior can be controlled by adjusting the synthesis conditions and the releasing media. This provides the guidance for the application of SBECD and LDH (LHS) in pesticide formulation.

Efficient degradation of organic pollutants by activated peroxymonosulfate over TiO2@C decorated Mg-Fe layered double oxides: Degradation pathways and mechanism

To activate peroxymonosulfate (PMS) is an efficient way for decomposition of non-biodegradable organic pollutants. Herein, Mg-Fe layered double oxides decorated with Ti₃C₂ MXene-derived TiO₂@C (T/LDOs) were fabricated to efficiently activate PMS for the degradation of Rhodamine B (RhB), acid red 1 (AR1), methylene blue (MB), and tetracycline hydrochloride (TC). The T/LDOs catalyst could decompose 95.8% of RhB, 94.8% of AR1, 84.9% of MB within 10 min, and 82.4% of TC within 60 min. The degradation rate constant of RhB in the optimal T/LDOs/PMS system was approximately 2.5 and 15.7 times higher than that in the Mg-Fe LDOs/PMS system and Mg-Fe LDH/PMS system, respectively. Importantly, the T/LDOs exhibited a wide working pH range (3.1-11.0) and high stability with low metal ions leaching, indicating its potential practical applications. Quenching experiments and electronic spin resonance results confirmed that both ^•O₂^- and ¹O₂ were the dominant active species in the T/LDOs/PMS system. In addition, the possible degradation pathway of RhB in the 5%-T/LDOs/PMS system was proposed. Finally, the catalytic mechanism study revealed that the T/LDOs with abundant surface hydroxyl groups and a certain amount of TiO₂@C facilitated the electron transfer between ≡Fe^(Ⅲ)‒OH complex and HSO₅^-, boosting the generation of ^•O₂^- and ¹O₂. This study provides an insight into exploiting highly efficient catalysts for PMS activation towards the degradation of organic pollutants.

Oxygen Vacancy-Mediated CuCoFe/Tartrate-LDH Catalyst Directly Activates Oxygen to Produce Superoxide Radicals: Transformation of Active Species and Implication for Nitrobenzene Degradation

Oxygen vacancies play a vital role in the catalytic activity of layered double hydroxide (LDH) catalysts in wastewater treatment. However, the mechanism of oxygen vacancy-mediated LDH-activated oxygen to produce reactive oxygen species (ROS) still lacks a reasonable explanation. In this work, a tartrate-modified CuCoFe-LDH (CuCoFe/Tar-LDH) with abundant oxygen vacancies was designed, which can efficiently degrade nitrobenzene (NB) under room conditions. The technical energy consumption is 0.011 kW h L^-1. According to the characterization and calculation results, it is proposed that oxygen vacancies are formed because of the oxygen deficiency which is caused by the reduction of the energy between the metal ion and oxygen, and the metal ion transitions to a lower state. Compared with CuCoFe-LDH, the oxygen vacancy formation energy of CuCoFe/Tar-LDH decreased from 1.98 to 1.13 eV. The O₂ bond length adsorbed on the oxygen vacancy is 1.27 Å, close to the theoretical length of superoxide radicals (^•O₂^-) (1.26 Å). Radical trapping experiments and electron spin-resonance spectroscopy spectrum prove that ^•O₂^- is an important precursor of ^•OH. This work is dedicated to the in-depth exploration of the oxygen vacancy-mediated CuCoFe/Tar-LDH catalyst activation mechanism for molecular oxygen and the conversion relationship between ROS.

Efficient catalyst prepared from water treatment residuals and industrial glucose using hydrothermal treatment: Preparation, characterization and its catalytic performance for activating peroxymonosulfate to degrade imidacloprid

Water treatment residuals (WTRs), as by-products of drinking water treatment plant, were used as catalyst for persulfate activation to degrade organic pollutants. In this study, G-HWTRs were successfully prepared by hydrothermal treatment, which combined WTRs and a hydrothermal reducing agent (industrial glucose) in different ratios. These materials manifested upgraded performance compared with raw WTRs and HWTRs (prepared only with WTRs under hydrothermal condition) in imidacloprid (IMD) degradation. The elemental composition, structure, morphological and magnetic properties of the G-HWTRs were investigated. And the influences of peroxymonosulfate (PMS) concentration, G-HWTRs dosage, initial pH, water matrix on IMD degradation were determined. The results demonstrated that G-HWTRs-3 had the best catalytic performance, 10 μM IMD was almost completely degraded in the system of G-HWTRs (0.2 g L^-1) and PMS (0.1 mM) within 2 h without pH adjustment. Based on the results of the electron spin-resonance spectroscopy (ESR) tests and radicals scavenging experiments, all of SO₄^-, OH, ¹O₂ and O₂- were the reactive oxygen species driving the IMD degradation, and OH was regarded as the main role of IMD degradation. The possible degradation pathways of IMD were further proposed based on the degradation intermediates that identified by LC-MS. Besides, further experiments indicated G-HWTRs has degradation potential for various pollutants, the degradation rate of atrazine (ATZ), acetochlor (ACE) and simazine (SMX) within 2 h achieved 92.54%, 83.88% and 90.25%, respectively. These results confirmed G-HWTRs has good catalytic performance and activation potential on PMS, providing an effective method for remediating organic polluted wastewater.

Layered double hydroxide based materials applied in persulfate based advanced oxidation processes: Property, mechanism, application and perspectives

Recently, persulfate-based advanced oxidation processes (persulfate-AOPs) are booming rapidly due to their promising potential in treating refractory contaminants. As a type of popular two-dimensional material, layered double hydroxides (LDHs) are widely used in energy conversion, medicine, environment remediation and other fields for the advantages of high specific surface area (SSA), good tunability, biocompatibility and facile fabrication. These excellent physicochemical characteristics may enable LDH-based materials to be promising catalysts in persulfate-AOPs. In this work, we make a summary of LDHs and their composites in persulfate-AOPs from different aspects. Firstly, we introduce different structure and important properties of LDH-based materials briefly. Secondly, various LDH-based materials are classified according to the type of foreign materials (metal or carbonaceous materials, mainly). Latterly, we discuss the mechanisms of persulfate activation (including radical pathway and nonradical pathway) by these catalysts in detail, which involve (i) bimetallic synergism for radical generation, (ii) the role of carbonaceous materials in radical generation, (iii) singlet oxygen (¹O₂) production and several special nonradical mechanisms. In addition, the catalytic performance of LDH-based catalysts for contaminants are also summarized. Finally, challenges and future prospects of LDH-based composites in environmental remediation are proposed. We expect this review could bring new insights for the development of LDH-based catalyst and exploration of reaction mechanism.

Layered Double Hydroxide Catalysts for Ozone Decomposition: The Synergic Role of M2+ and M3

In previous work, we successfully prepared a NiFe-layered double hydroxide (LDH) with superior activity and stability for catalytic ozone decomposition, which fundamentally avoids deactivation under high-humidity conditions. However, the role of the metal elements (M²⁺ and M³⁺) in LDH catalysts is not clear. Here, LDH materials containing different metals (NiFe, NiAl, NiMn, CoFe, and MgFe) were prepared by a simple co-precipitation method. It was found that the LDHs containing Ni²⁺ exhibited catalytic performance far superior to that of Co²⁺ and Mg²⁺ for ozone elimination, and NiFe-LDH had the best activity and stability among LDH materials prepared in this study. The NiFe-LDH can maintain 78% catalytic activity within 144 h at room temperature, even under a relative humidity of 65% and a space velocity of 840 L·g^-1·h^-1. Physicochemical characterizations demonstrated that chemical stability in an oxidizing atmosphere and the synergic role of M²⁺ and M³⁺ ions are crucial. The result of density functional theory calculation showed that the synergic role of Ni²⁺ and Fe³⁺ weakens the interaction between O and H in the O-H bond, which effectively lowers the reaction barrier of ozone decomposition compared with MgFe-LDH.

2D/2D FeNi-layered double hydroxide/bimetal-MOFs nanosheets for enhanced photo-Fenton degradation of antibiotics: Performance and synergetic degradation mechanism

The photo-Fenton system exhibits great potential in environmental remediation. However, photo-Fenton process suffers from slow reaction kinetics, which is caused by the low yield of available charge carriers and active radicals. In this work, the 2D/2D FeNi-layered double hydroxide/bimetal-organic frameworks nanosheets (FeNi-LDH/BMNSs) photocatalyst was fabricated via an in-situ semi-sacrificial template strategy. The optimized FeNi-LDH/BMNSs + H₂O₂+Vis system showed excellent tetracycline hydrochloride (TC-HCl) removal rate of 95.76% in 60 min. Besides, the high TC-HCl degradation rates (above 80%) are obtained in a wide pH range and the total organic carbon (TOC) removal rate of 48.98% was remained after four cycles. Experiments and characterizations identified the fast catalysis process were ascribed to the synergetic effect between 2D/2D heterojunctions and Lewis acid sites with mixed-valence (Fe (III)/Ni (II)) in FeNi-LDH/BMNSs. As a result, the catalysis of H₂O₂ and the reduction of O₂ was accelerated by the continuous generation of Fe (II) and available photogenerated electrons, respectively, producing abundant active radicals including OH and O₂^-. Finally, this photo-Fenton system exhibited high removal rate to oxycycline, levofloxacin, norfloxacin and doxycycline and showed excellent performance for TC-HCl removal in different composed wastewater. The findings provide a new strategy towards creating 2D/2D active heterogeneous catalysts for photo-Fenton catalytic application.

Cu-doped Ni-LDH with abundant oxygen vacancies for enhanced methyl 4-hydroxybenzoate degradation via peroxymonosulfate activation: key role of superoxide radicals

Oxygen vacancies (OVs) were introduced into Ni-based layered double hydroxides (LDHs) through Cu doping, and the catalytic performance of the resulting Ni_xCu-LDHs were investigated for peroxymonosulfate (PMS) activation and methyl 4-hydroxybenzoate (MeP) degradation. Compared with that of Ni-LDH, the catalytic performance of Ni_xCu-LDHs were significantly enhanced and increased with increasing OV content in the catalysts, indicating that Cu doping introduced OVs into Ni_xCu-LDHs and greatly improved their catalytic activity with PMS. Quenching experiments and EPR analyses confirmed that oxidation processes dominated by superoxide radicals (O₂^•-) and singlet oxygen (¹O₂), rather than sulfate radicals (SO₄^•-) or hydroxyl radicals (•OH) used by traditional LDH catalysts, were responsible for MeP degradation by Ni₁₅Cu-LDHs. In addition, quenching experiments with different systems showed the fate of reduced SO₄^•-and •OH, and demonstrated that O₂^•- and ¹O₂ concentrations grew with increasing OV content, confirming that the presence of OVs affected the process of PMS activation. Notably, O₂^•- mainly originated from adsorbed oxygen or dissolved oxygen (DO) by acquiring electrons from OVs in Ni₁₅Cu-LDHs, since OVs possess abundant localized electrons. Consequently, an OV-mediated oxidative mechanism was proposed for Ni₁₅Cu-LDHs/PMS. This study provides new clues for enhancing the catalytic performance of LDH catalysts by introducing OVs via metal doping in PMS-based AOPs systems.

Environmentally Benign Formation of Nickel Hexacyanoferrate-Derived Mesoframes for Heterogeneous Catalysis

The tetramethylammonium hydroxide (TMAH)-controlled alkaline etching of nickel hexacyanoferrate (NiHCF) mesocrystals is explored. The alkaline etching enables the formation of hollow framework structures with an increased surface area, the exposure of active Ni and Fe sites and the retention of morphology. The ambient reaction conditions enable the establishment of a sustainable production. Our work reveals novel perspectives on the eco-friendly synthesis of hollow and colloidal superstructures for the efficient degradation of the organic contaminants rhodamine-B and bisphenol-A. In the case of peroxomonosulfate (PMS)-mediated bisphenol-A degradation, the rate constant of the etched mesoframes was 10,000 times higher indicating their significant catalytic activity.

Layered double hydroxides and related hybrid materials for removal of pharmaceutical pollutants from water

Pharmaceuticals and their by-products are recalcitrant contaminants in water. Moreover, the high consumption of these drugs has many detrimental effects on body waters and ecosystems. In this timely review, the advances in molecular engineering of layered double hydroxides (LDH) that have been used for the removal of pharmaceutical pollutants are discussed. The approach starts from the strategies to obtain homogeneous synthesis of LDH that allow the doping and/or surface functionalization of different metals and oxides, producing heterojunction systems as well as composites with carbon and silica-based materials with high surface area. Adsorption is considered as a traditional removal of pharmaceutical pollutants, so the kinetic and mechanism of this phenomenon are analyzed based on pH, temperature, ionic strength, in order to obtain new insights for the formation of multifunctional LDH. Advanced oxidation methodologies, mainly heterogeneous photocatalysis and Fenton-like processes, stand out as the more efficient even to obtain the mineralization of the drugs. The LDH have the advantage of structural memory that favors regeneration processes. The reconstruction of calcined LDH can be used to improve drug removal, through a combination of adsorption capacity/catalytic activity. A meticulous analysis of the persistence, toxicity and bioaccumulation of the most common pharmaceuticals has allowed us to highlight the ability of the LDH to remove recalcitrant drugs at relatively low concentrations (ppm, ppb), in contrast to other mixed oxide nanostructures and homogeneous oxidation processes. In this sense, the mechanism of drug removal by LDH is discussed based on the importance of the use of composites, scavenger agents, Fenton and electro-Fenton processes, membranes, thin films and coatings, among others. In addition, the ecotoxicity of LDH is also reviewed to indicate that these layered structures can exhibit biocompatibility or high toxicity depending on the adsorbed drug and ions/metals that compose them. Undoubtedly, the LDH have a unique flexible structure with adsorption capacity and catalytic activity, facts that explain the important reasons for their extensive use in the environmental remediation of pharmaceutical pollutants from water.

Dendrimer-Ni-Based Material: Toward an Efficient Ni-Fe Layered Double Hydroxide for Oxygen-Evolution Reaction

Ni/Fe oxides are among the most widely used catalysts for water splitting. This paper outlines a new approach to synthesize Ni-Fe layered double hydroxides (Ni-Fe LDHs) for oxygen-evolution reaction (OER). Herein, we show that a dendrimer with carboxylate surface groups (generation 3.5) could react with Ni(II) ions to form a precatalyst for OER. During electrochemical OER, this precatalyst converted to Ni-Fe LDH, which is an efficient catalyst toward OER in the presence of Fe(III) ions. The catalyst was characterized by a number of methods and applied for OER using fluorine-doped tin oxide (FTO), Au, Pt, Ni foam, and glassy carbon electrodes. The catalyst shows a current density of 100 mA/cm² on the surface of the Ni foam, using only 297 mV overpotential and with the Tafel slope of 60.8 mV/decade. A current density of 50 mA/cm² on the surface of Au or Pt requires 333 and 317 mV overpotentials, respectively. The slopes of the Tafel plots for the catalyst on Au, GC, and Pt are 52.5, 47.1, and 37.4 mV/decade, respectively. The dendrimer resulted in a large dispersibility and an increase in active sites of Ni-Fe LDH, as well as the formation of Ni-Fe LDH.

Optimized hierarchical nickel sulfide as a highly active bifunctional catalyst for overall water splitting

Rational design of non-noble metal electrocatalysts with high intrinsic activity for both the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is extremely impressive for sustainable electrocatalytic water splitting systems. However, it still remains a major challenge to engineer bifunctional performance. Here, we put forward a highly efficient water electrolyzer based on Ni3S2-based materials. The hierarchical structure of Ni3S2 can be well regulated for optimizing the HER catalytic activity. The best c-Ni3S2/NF electrode exhibits a much smaller overpotential of 220 mV to reach the current density of 100 mA cm-2. Upon introducing Fe species onto the Ni3S2/NF electrode by a simple dipping/drying method, the intrinsic OER activity can be extremely improved. As a result, the Fe-c-Ni3S2/NF catalyst showed excellent catalytic activity for the OER, including an overpotential of 193 mV at 10 mA cm-2, high specific current density and excellent stability. Post-characterization studies proved that the remaining S anions have an effective influence on improving the OER intrinsic activity. The assembled water electrolyzer also presented superior performance, such as a very low cell voltage of 1.50 V at 10 mA cm-2 and excellent durability for 120 h in alkaline medium. This strategy provides a promising way to design highly active and low-cost materials for overall water electrolysis.

High-performance and stable photoelectrochemical water splitting cell with organic-photoactive-layer-based photoanode

Considering their superior charge-transfer characteristics, easy tenability of energy levels, and low production cost, organic semiconductors are ideal for photoelectrochemical (PEC) hydrogen production. However, organic-semiconductor-based photoelectrodes have not been extensively explored for PEC water-splitting because of their low stability in water. Herein, we report high-performance and stable organic-semiconductors photoanodes consisting of p-type polymers and n-type non-fullerene materials, which is passivated using nickel foils, GaIn eutectic, and layered double hydroxides as model materials. We achieve a photocurrent density of 15.1 mA cm⁻² at 1.23 V vs. reversible hydrogen electrode (RHE) with an onset potential of 0.55 V vs. RHE and a record high half-cell solar-to-hydrogen conversion efficiency of 4.33% under AM 1.5 G solar simulated light. After conducting the stability test at 1.3 V vs. RHE for 10 h, 90% of the initial photocurrent density are retained, whereas the photoactive layer without passivation lost its activity within a few minutes.

While organic semiconductors may be useful in photoelectrochemical water-splitting materials, they show low stability in water. Here, the authors report high-performance and stable organic-semiconductor-based photoanodes passivated using nickel foils, GaIn eutectic, and layered double hydroxides.

Degradable self-adhesive epidermal sensors prepared from conductive nanocomposite hydrogel

Conductive hydrogel-based epidermal sensors are attracting significant interest due to their great potential in soft robotics, electronic skins, bioelectronics and personalized healthcare monitoring. However, the conventional conductive hydrogel-based epidermal sensors cannot be degraded, resulting in the significant problem of waste, which will gradually increase the burden on the environment. Herein, degradable adhesive epidermal sensors were assembled using conductive nanocomposite hydrogels, which were prepared via the conformal coating of cellulose nanofiber (CNF) networks and supramolecular interaction among CNF, polydopamine (PDA), Fe³⁺, and polyacrylamide (PAM). They exhibited superior mechanical properties, reliable degradability (30 days in water), and excellent self-adhesiveness. The obtained hydrogels could be assembled as self-adhesive, degradable epidermal sensors for real-time human motion monitoring. Air could be sucked into the hydrogels during their swelling process, thereby oxidizing the tris-catechol-Fe³⁺ complexes and releasing Fe³⁺. Finally, the polymer networks were degraded via a Fenton-like reaction dominated by S₂O₈^2- and Fe(ii/iii) with the help of the catechol groups of PDA. This work paves the way for the potential fabrication of degradable, and self-adhesive epidermal sensors for applications in human-machine interactions, implantable bioelectronics, and personalized healthcare monitoring.