Visible Light Response Photocatalytic Performance of Z-Scheme Ag3PO4/GO/UiO-66-NH2 Photocatalysts for the Levofloxacin Hydrochloride

Construction of a novel S-scheme AgVO3/CaIn2S4 heterostructure for efficient photodegradation of tetracycline hydrochloride

Constructing an S-scheme system with highly active catalysts is a significant approach for improving the separation of photoinduced carriers to solve the related environmental aggravation. In this study, a well-designed S-scheme AgVO3/CaIn2S4 photocatalyst was synthesized for water purification by in situ growing CaIn2S4 nanocrystals on AgVO3 nanorod surfaces. The optimized AgVO3/CaIn2S4 heterostructure demonstrates an enhanced photocatalytic efficiency (94.1%) toward tetracycline hydrochloride (TCH) degradation compared with bare AgVO3 (42.6%) and CaIn2S4 (81.6%). The significant enhancement of photocatalytic activity is attributed to the S-scheme charge transfer mechanism in the AgVO3/CaIn2S4 heterostructure, which effectively directs photogenerated charge migration, boosts charge transfer, and preserves the high redox capacity of photoexcited electrons and holes on different active sites. This study is expected to offer insights into strategically designing and preparing S-scheme heterojunction photocatalysts to improve water purification.

MOF-Derived In2O3 Microrod-Decorated MgIn2S4 Nanosheets: Z-Scheme Heterojunction for Efficient Photocatalytic Degradation of Tetracycline

The construction of Z-scheme heterostructures using matching band semiconductors is an effective strategy for producing highly efficient photocatalysts. In this study, MgIn2S4(MIS) was grown in situ on In2O3 microrods created with an In-based MOF material (In-MIL-68) as a template to successfully establish a unique MIS-In2O3 heterojunction with a well-matched Z-scheme interface charge transfer channel. Tetracycline (TC) as a typical antibiotic was chosen as the target pollutant to evaluate the photocatalytic activity. After 120 min of visible light irradiation, the MIS-In2O3-(10:1) material had the greatest photocatalytic degradation activity of tetracycline with 96.55%, which was 2.39 and 4.26 times that of MIS and In2O3, respectively. The improved photocatalytic activity is attributed to the in situ growth of MIS on In2O3, forming a Z-scheme heterojunction at the interface, which not only increases the specific surface area, exposes the abundant active site, and improves light utilization but also facilitates the migration and separation of photogenic carriers. The photocatalytic degradation products of TC were detected by liquid chromatography-mass spectrometry (LC-MS), and a preliminary degradation pathway was proposed. Radical capture experiments and ESR analysis confirmed that the main active species were holes (h+), superoxide radicals (•O2-), and superoxide and hydroxyl radicals (•OH). Finally, combined with band position analysis, this study proposes a direct Z-scheme heterojunction mechanism to improve the photocatalytic degradation of tetracycline in MIS under visible light.

Optimization of Visible-Light-Driven Ciprofloxacin Degradation Using a Z-Scheme Semiconductor MgFe2O4/UiO-67

A heterogeneous photocatalyst, MgFe2O4/UiO-67 (MU-x), was successfully synthesized by doping magnetic magnesium ferrite nanoparticles (MgFe2O4) with the UiO-67 metal-organic framework at various weight ratios (MgFe2O4: UiO-67 at 30, 50, 70, and 90 wt %). Various techniques, including X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR) , Brunauer-Emmett-Teller (BET), photoluminescence (PL), vibrating sample magnetometry (VSM), electrochemical impedance spectroscopy (EIS), and ultraviolet-visible diffuse reflectance spectroscopy (UV-vis DRS), were used to characterize the prepared photocatalysts. The photocatalytic performance of MU-x in the degradation of ciprofloxacin (CIP) under visible light was assessed. The CIP degradation efficiency was found to increase as the amount of MgFe2O4 in the composite was increased up to 70 wt %. Experimental conditions were optimized using response surface methodology (RSM) based on central composite design (CCD) with three factors: initial pH, catalyst loading, and CIP concentration. Using the obtained model, the optimal conditions were determined as follows: initial pH of 8.025, catalyst loading of 33.8 wt %, and CIP concentration of 10.8 mg/L. Under these optimal conditions, a notable improvement was achieved, with 99.62% of CIP removal achieved within 90 min, surpassing the performance of previously reported photocatalysts. Total organic carbon (TOC) analysis revealed a high degree of mineralization, at 81.25%. The degradation pathway of CIP was investigated based on liquid chromatography-mass spectrometry (LC-MS) analysis. Finally, the values of ECB and EVB of the photocatalyst were determined and the possible degradation mechanism of CIP was investigated based on Mott-Schottky and the applied scavengers. The hydroxyl radical (•OH) was identified as the dominant species in the removal of CIP through a trapping experiment. The photocatalyst with 70 wt % of MgFe2O4 (MU-70) exhibited excellent stability and recoverability with an external magnet, demonstrating 86.33% CIP removal after four cycles. According to the obtained results, MU-70 is a promising visible-light-active photocatalyst with great potential for water treatment applications and convenient recovery.

Accelerated radical generation from visible light driven peroxymonosulfate activation by Bi2MoO6/doped gCN S-scheme heterojunction towards Amoxicillin mineralization: Elucidation of the degradation mechanism

A novel S-scheme photocatalyst Bi₂MoO₆ @doped gCN (BMO@CN) was prepared through a facile microwave (MW) assisted hydrothermal process and further employed to degrade Amoxicillin (AMOX), by peroxymonosulfate (PMS) activation with visible light (Vis) irradiation. The reduction in electronic work functions of the primary components and strong PMS dissociation generate abundant electron/hole (e^-/h⁺) pairs and SO₄^*-,*OH,O₂^*-reactive species, inducing remarkable degeneration capacity. Optimized doping of Bi₂MoO₆ on doped gCN (upto 10 wt%) generates excellent heterojunction interface with facile charge delocalization and e^-/h⁺ separation, as a combined effect of induced polarization, layered hierarchical structure oriented visible light harvesting and formation of S-scheme configuration. The synergistic action of 0.25 g/L BMO(10)@CN and 1.75 g/L PMS dosage can degrade 99.9% of AMOX in less than 30 min of Vis irradiation, with a rate constant (k_obs) of 0.176 min^-1. The mechanism of charge transfer, heterojunction formation and the AMOX degradation pathway was thoroughly demonstrated. The catalyst/PMS pair showed a remarkable capacity to remediate AMOX-contaminated real-water matrix. The catalyst removed 90.1% of AMOX after five regeneration cycles. Overall, the focus of this study is on the synthesis, illustration and applicability of n-n type S-scheme heterojunction photocatalyst to the photodegradation and mineralization of typical emerging pollutants in the water matrix.

Efficiency of Ag3PO4/TiO2 as a heterogeneous catalyst under solar and visible light for humic acid removal from aqueous solution

Nowadays, the presence of humic acid (HA) in water sources is highly regarded due to the production of extremely harmful byproducts such as trihalomethanes. In this study, the effectiveness of an Ag₃PO₄/TiO₂ catalyst produced by in situ precipitation as a heterogeneous catalyst for the degradation of humic acid in the existence of visible and solar light was evaluated. The Ag₃PO₄/TiO₂ catalyst's structure was characterized using X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS), after which the catalyst dosage, HA concentration, and pH parameters were adjusted. After a 20-min reaction, the highest HA degradation of 88.2% and 85.9% in presence of solar light and visible light were attained at the ideal operating conditions of 0.2 g/L catalyst, 5 mg/L HA, and pH 3, respectively. It was discovered that, based on kinetic models, the degradation of HA matched both Langmuir-Hinshelwood and pseudo-first-order kinetics at concentrations of 5 to 30 mg/L (R² > 0.8). The Langmuir-Hinshelwood model had surface reaction rate constants (K_c) of 0.729 mg/L.min and adsorption equilibrium constants (K_L-H) of 0.036 L/mg. Eventually, a real-water investigation into the process' effectiveness revealed that, under ideal circumstances, the catalyst had a reasonable HA removal efficiency of 56%.

Plant-based green fabrication of CuO-CdO-bentonite S-scheme heterojunction with enhanced photocatalytic performance for the degradation of levofloxacin

In this research, for the first time, CuO and CdO nanoparticles (NPs) were synthesized using Ferula persica and anchored on layered bentonite as a novel S-scheme nano-heterojunction (denoted as CuO-CdO-BT). Ferula persica acted as a naturally-sourced reducing agent and stabilizer for the synthesis of NPs. The performance of CuO-CdO-BT was evaluated for the degradation of levofloxacin from an aqueous solution under sunlight. The characterization results clarified that the bentonite as a support not only reduced the agglomeration of CuO and CdO NPs but also decreased the size of biosynthesized NPs, which increased the active surface of NPs and the photodegardation efficiency. The effect of operational reaction system variables was examined to optimize the photocatalytic capability of CuO-CdO-BT. Under optimum conditions (catalyst dosage = 0.4 g/L, LVF concentration = 10 mg/L and pH = 8), 96.11% of levofloxacin was degraded using CuO-CdO-BT after 30 min with degradation kinetic of 0.108 min-1, which was about 2.4 and 4.2 times higher than those of bare CuO and CdO NPs, respectively. The improvement of the photocatalytic degradation efficiency of CuO-CdO-BT compared to CuO and CdO NPs was due to preventing the recombination of charge carriers in the S-scheme system. The radical quenching experiments ascertained the generation of [Formula: see text]·OH, and [Formula: see text] species in the CuO-CdO-BT system, indicating that ·OH radicals have a more prominent role than [Formula: see text] and [Formula: see text] in the photocatalytic reaction. The six possible levofloxacin pathways of LVF degradation were suggested based on HPLC-MS analysis. Over 88.5% LVF was removed using CuO-CdO-BT after three catalyst reuse cycles, indicating a cost-effectiveness potential of the biosynthesized photocatalyst reusability. Almost complete mineralization of LVF was obtained by the CuO-CdO-BT photocatalyst after 180 min of reaction. Based on findings, the S-scheme mechanism of photo-generated electron-hole pairs transfer in the CuO-CdO-BT system was found. The unique structural features of the new generation of S-scheme heterojunction and green synthesis of NPs using plants provide promising photocatalysts to improve wastewater treatment.

Highly Efficient Bi4Ti3O12/g-C3N4/BiOBr Dual Z-Scheme Heterojunction Photocatalysts with Enhanced Visible Light-Responsive Activity for the Degradation of Antibiotics

A novel Bi₄Ti₃O₁₂/g-C₃N₄/BiOBr(BTO/CN/BOB) composite was synthesized by a solvothermal-mechanical mixed thermal method. The composition, structure, and micromorphology of the samples were analyzed. The BTO/CN/BOB composite photocatalyst shows better photocatalytic performance for tetracycline hydrochloride (TC) degradation compared to Bi₄Ti₃O₁₂ and binary composite photocatalysts. The highest degradation rate of TC can reach 89.84% using the BTO/CN/BOB photocatalyst under the optimal conditions, and BTO/CN/BOB still exhibits good photocatalytic properties after recycling. Moreover, it also shows good photodegradation activity for different kinds of antibiotics, implying its wide application prospect. The photocatalytic performance and reuse stability of BTO/CN/BOB were significantly improved, which may be because of the enhanced spectral absorption range and efficient electron transfer capability by the synergistic effect and interaction among Bi₄Ti₃O₁₂, BiOBr, and g-C₃N₄. Finally, the possible degradation pathway and electron transfer mechanism of the dual Z-scheme heterojunction are proposed.

Fabrication of MIL-53(Fe)/Ag3PO4 cooperated Photoreduction of Ag0 Particles with outstanding Efficiency on photo-driven H2 Evolution and Pollutant Degradation

The novel heterostructure photocatalyst includes photoreduction of Ag0 loaded MIL-53(Fe)/Ag3PO4 (MFAAx) composites were designed and successfully synthesized via hydrothermal with deposition and photoreduction method. Then the physicochemical and optical properties...