Effect of pH and Salt on Surface pKa of Phosphatidic Acid Monolayers

The Binding of Cu2+ to Lipid Membranes Is Not Substantially Influenced by Electrostatic Screening

Gouy-Chapman theory predicts that salt screening and modulating the interfacial charge density should strongly influence the apparent dissociation constant, Kd,app, between Cu2+ and negatively charged phosphatidylserine (PS) lipids in supported lipid bilayers (SLBs). Specifically, Kd,app would be expected to increase (weaken binding) by a factor of 40 when 100 mM NaCl is introduced into the solution because of electrostatic screening between the membrane and Cu2+ cations. Surprisingly, however, fluorescence quenching measurements demonstrate that Kd,app increases by less than a factor of 2 when increasing the salt concentration in the presence of standard buffers, such as tris(hydroxymethyl)aminomethane (Tris). Moreover, increasing the negative surface charge density by a factor of 4 would be predicted to decrease (strengthen binding) Kd,app by 3 orders of magnitude. Instead, Kd,app increases slightly when 15 mol % phosphatidylglycerol (PG), a negatively charged lipid, is introduced into SLBs already containing 5 mol % PS. Such findings indicate that electrostatic double layer theory is not a useful approach for predicting the binding behavior of transition metal cations to negatively charged interfaces. The problem lies with the fact that standard buffers, such as Tris, form a wide variety of coordination complexes in bulk solution with transition metal cations like Cu2+. Typically, dozens of complexes are present simultaneously at any given pH value and the net charge on them ranges from positive to neutral to negative. Such variations in charge on the complexes result in electrostatic screening and interfacial potential effects that are substantially diminished or nonexistent. These results should generally apply to the binding behavior of first row transition metal ions, when the cations predominantly reside in complexes rather than as free ions. This includes in vivo conditions, where the concentration of free transition metal ions is often very low.

Electrostatics, Hydration, and Chemical Equilibria at Charged Monolayers on Water

The chemistry and physics of soft matter interfaces, especially aqueous-organic interfaces, are centrally important to many areas of science and technology. Often, the thermodynamics, kinetics, and selectivity of reactions are modified at interfaces. Here, we review the electrostatics and hydration at charged monolayers on water and their influence on interfacial chemical equilibria. First, we provide an understanding of interfaces as a conceptual continuation of the solvation shell of small molecules, along with recent relevant experimental work. Then, we provide a summary of models for describing the electrostatics of aqueous interfaces. While we will discuss a range of new developments, our focus will be on systems where the electrostatics of the surface is controllable by the choice of relatively simple insoluble surfactants. New insights into the molecular structure of the double layer, with particular attention on the knowledge gained from spectroscopy will be reviewed. Our approach is to familiarize the reader with simple models, followed by discussion of models with further complexity for explaining interfacial phenomena. Experiments that test the limits of such models will also be discussed. Finally, we will provide an outlook on engineering the interfacial environment for tailored reactivity, along with the anticipated experimental advancements and potentials impacts.

Structural basis of undecaprenyl phosphate glycosylation leading to polymyxin resistance in Gram-negative bacteria

In Gram-negative bacteria, the enzymatic modification of Lipid A with aminoarabinose (L-Ara4N) leads to resistance against polymyxin antibiotics and cationic antimicrobial peptides. ArnC, an integral membrane glycosyltransferase, attaches a formylated form of aminoarabinose to the lipid undecaprenyl phosphate, enabling its association with the bacterial inner membrane. Here, we present cryo-electron microscopy structures of ArnC from S. enterica in apo and nucleotide-bound conformations. These structures reveal a conformational transition that takes place upon binding of the partial donor substrate. Using coarse-grained and atomistic simulations, we provide insights into substrate coordination before and during catalysis, and we propose a catalytic mechanism that may operate on all similar metal-dependent polyprenyl phosphate glycosyltransferases. The reported structures provide a new target for drug design aiming to combat polymyxin resistance.

Surface accumulation and acid-base equilibrium of phenol at the liquid-vapor interface

We have investigated the surfactant properties of phenol in aqueous solution as a function of pH and bulk concentration using liquid-jet photoelectron spectroscopy (LJ-PES) and surface tension measurements. The emphasis of this work is on the determination of the Gibbs free energy of adsorption and surface excess of phenol and its conjugate base phenolate at the bulk pKa (9.99), which can be determined for each species using photoelectron spectroscopy. These values are compared to those obtained in measurements well below and well above the pKa, where pure phenol or phenolate, respectively, are the dominant species, and where the Gibbs free energy of adsorption determined from surface tension and LJ-PES data are in excellent agreement. At the bulk pKa the surface-sensitive LJ-PES measurements show a deviation of the expected phenol/phenolate ratio in favor of phenol, i.e., an apparent upward shift of the at the surface. In addition, the Gibbs free energies of adsorption determined by LJ-PES at the bulk pKa for phenol and phenolate deviate from those observed for the pure solutions. We discuss these observations in view of the different surface propensity of phenol and phenolate as well as potential cooperative interactions between them in the near-surface region.

GMP affected assembly behaviors of phosphatidylethanolamine monolayers elucidated by multi-resolved SFG-VS and BAM

The interaction between nucleotide molecules and lipid molecules plays important roles in cell activities, but the molecular mechanism is very elusive. In the present study, a small but noticeable interaction between the negatively charged phosphatidylethanolamine (PE) and Guanosine monophosphate (GMP) molecules was observed from the PE monolayer at the air/water interface. As shown by the sum frequency generation (SFG) spectra and Pi-A isotherm of the PE monolayer, the interaction between the PE and GMP molecules imposes very small changes to the PE molecules. However, the Brewster angle microscopy (BAM) technique revealed that the assembly conformations of PE molecules are significantly changed by the adsorption of GMP molecules. By comparing the SFG spectra of PE monolayers after the adsorption of GMP, guanosine and guanine, it is also shown that the hydrogen bonding effect plays an important role in the nucleotide-PE interactions. These results provide fundamental insight into the structure changes during the nucleotide-lipid interaction, which may shed light on the molecular mechanism of viral infection, DNA drug delivery, and cell membrane curvature control in the brain or neurons.

Determining the Surface pKa of Perfluorooctanoic Acid

Perfluorooctanoic acid (PFOA) is an environmentally prevalent and persistent organic pollutant with toxic and bioaccumulative properties. Despite the known importance of perfluorinated pollutants in the global environment, molecular-level details of the physicochemical behavior of PFOA on aqueous interfaces remain poorly understood. Here, we utilized two surface-specific techniques, vibrational sum frequency generation spectroscopy (SFG) and surface tensiometry, to investigate the pH-induced structural changes of PFOA and octanoic acid (OA) and determined the apparent pKa at the air-water surface. The SFG spectra and surface activity model were investigated over a wide range of pHs. With the surface tension measurements, the surface pKa values for OA and PFOA are determined to be 3.8 ± 0.1 and 2.2 ± 0.2, respectively. These results could provide insights into improved remediation of PFOAs and may impact climate modeling of perfluorinated alkyl chain molecules.

Unraveling Complex Hysteresis Phenomenon in 1,2-Dipalmitoyl-sn-Glycero-3-Phosphocholine Monolayer: Insight into Factors Influencing Surface Dynamics

This study explores the hysteresis phenomenon in DPPC (1,2-dipalmitoyl-sn-glycero-3-phosphocholine) monolayers, considering several variables, including temperature, compression and expansion rates, residence time, and subphase content. The investigation focuses on analyzing the influence of these variables on key indicators such as the π-A isotherm curve, loop area, and compression modulus. By employing the Langmuir-Blodgett technique, the findings reveal that all the examined factors significantly affect the aforementioned parameters. Notably, the hysteresis loop, representing dissipated energy, provides valuable insights into the monolayer's viscoelasticity, molecular packing, phase transition changes, and resistance during the isocycle process. These findings contribute to a comprehensive understanding of the structural and dynamic properties of DPPC monolayers, offering insights into their behavior under varying conditions. Moreover, the knowledge gained from this study can aid in the development of precise models and strategies for controlling and manipulating monolayer properties, with potential applications in drug delivery systems, surface coatings, as well as further investigation into air penetration into alveoli and the blinking mechanism.

Lipid-Coated Nanobubbles in Plants

One of the more surprising occurrences of bulk nanobubbles is in the sap inside the vascular transport system of flowering plants, the xylem. In plants, nanobubbles are subjected to negative pressure in the water and to large pressure fluctuations, sometimes encompassing pressure changes of several MPa over the course of a single day, as well as wide temperature fluctuations. Here, we review the evidence for nanobubbles in plants and for polar lipids that coat them, allowing nanobubbles to persist in this dynamic environment. The review addresses how the dynamic surface tension of polar lipid monolayers allows nanobubbles to avoid dissolution or unstable expansion under negative liquid pressure. In addition, we discuss theoretical considerations about the formation of lipid-coated nanobubbles in plants from gas-filled spaces in the xylem and the role of mesoporous fibrous pit membranes between xylem conduits in creating the bubbles, driven by the pressure gradient between the gas and liquid phase. We discuss the role of surface charges in preventing nanobubble coalescence, and conclude by addressing a number of open questions about nanobubbles in plants.

Elucidation of the pH-Dependent Electric Double Layer Structure at the Silica/Water Interface Using Heterodyne-Detected Vibrational Sum Frequency Generation Spectroscopy

The silica/water interface is one of the most abundant charged interfaces in natural environments, and the elucidation of the water structure at the silica/water interface is essential. In the present study, we measured the interface-selective vibrational (χ(2)) spectra in the OH stretch region of the silica/water interface in a wide pH range of pH 2.0-12.0 while changing the salt concentration by heterodyne-detected vibrational sum-frequency generation spectroscopy. With the help of singular value decomposition analysis, it is shown that the imaginary part of the χ(2) (Imχ(2)) spectra can be decomposed into the spectra of the diffuse Gouy-Chapman layer (DL) and the compact Stern layer (SL), which enables us to quantitatively analyze the spectra of DL and SL separately. The salt-concentration dependence of the DL spectra at different pH values is analyzed using the modified Gouy-Chapman theory, and the pH-dependent surface charge density and the pKa value (4.8 ± 0.2) of the silica/water interface are evaluated. Furthermore, it is found that the pH-dependent change of the SL spectra is quantitatively explained by three spectral components that represent the three characteristic water species appearing in different pH regions in SL. The quantitative understanding obtained from the analysis of each spectral component in the Imχ(2) spectra provides a clear molecular-level picture of the electric double layer at the silica/water interface.

Role of Sn(II) in Mediating the Formation and Organization of a Langmuir Monolayer

The influence of the Sn(II) ion on the formation and morphology of an arachidic acid (AA) monolayer was investigated using Langmuir film formation technology, pressure-area (Π-A) isotherm measurements, and Brewster angle microscopy (BAM). Our findings indicate that AA Langmuir monolayers exhibit organization that depends on subphase pH and Sn²⁺ concentration. There are multiple equilibria that are relevant to the complexation of AA monolayers, and the balance of Sn(OH)_n equilibria and Sn(AA)_n equilibria gives rise to unusual monolayer structural effects. With Sn²⁺ in the subphase, the AA monolayer exhibits an isotherm characterized by the absence of a collapse point and with a pH-dependent change in isotherm shape not consistent with the formation of an ordered solid phase. The amphiphile headgroup equilibrium mediates the absence of collapse seen experimentally and the ability of the monolayer to retain organization at a surface pressure of ca. 70 mN/m. BAM images show that the morphology of the monolayer depends on the Sn²⁺ concentration, consistent with several species of Sn(AA)_n, where n = 1, 2, or 3, contributing to the overall monolayer order.

Acting as a Molecular Tailor: Dye Structural Modifications for Improved Sensitivity toward Lysophosphatidic Acids Sensing

Lysophosphatidic acids (LPA) are key biomarkers for several physiological processes, the monitoring of which can provide insights into the host's health. Common lab-based techniques for their detection are cumbersome, expensive, and necessitate specialized personnel to operate. LPA-sensitive fluorescent probes have been described, albeit for nonaqueous conditions, which impedes their use in biological matrices. In this paper, we explore in detail the influence of structure on the extent of aggregation-induced fluorescence quenching using specially synthesized styrylpyridinium dyes bearing structural adaptations to bestow them enhanced affinity toward LPA in aqueous media. Spectroscopic investigations supported by time-resolved fluorimetry revealed the contribution of excimer formation to the fluorescence quenching mechanism displayed by the fluorescent probes. Experimental observations of the influence of structure on detection sensitivity were supported by DFT calculations.

Binding of DEP domain to phospholipid membranes: More than just electrostatics

Over the past decades an extensive effort has been made to provide a more comprehensive understanding of Wnt signaling, yet many regulatory and structural aspects remain elusive. Among these, the ability of Dishevelled (DVL) protein to relocalize at the plasma membrane is a crucial step in the activation of all Wnt pathways. The membrane binding of DVL was suggested to be mediated by the preferential interaction of its C-terminal DEP domain with phosphatidic acid (PA). However, due to the scarcity and fast turnover of PA, we investigated the role on the membrane association of other more abundant phospholipids. The combined results from computational simulations and experimental measurements with various model phospholipid membranes, demonstrate that the membrane binding of DEP/DVL constructs is governed by the concerted action of generic electrostatics and finely-tuned intermolecular interactions with individual lipid species. In particular, while we confirmed the strong preference for PA lipid, we also observed a weak but non-negligible affinity for phosphatidylserine, the most abundant anionic phospholipid in the plasma membrane, and phosphatidylinositol 4,5-bisphosphate. The obtained molecular insight into DEP-membrane interaction helps to elucidate the relation between changes in the local membrane composition and the spatiotemporal localization of DVL and, possibly, other DEP-containing proteins.

Lipid headgroup and side chain architecture determine manganese-induced dose dependent membrane rigidification and liposome size increase

Metal ion-membrane interactions have gained appreciable attention over the years resulting in increasing investigations into the mode of action of toxic and essential metals. More work has focused on essential ions like Ca or Mg and toxic metals like Cd and Pb, whereas this study investigates the effects of the abundant essential trace metal manganese with model lipid systems by screening zwitterionic and anionic glycerophospholipids. Despite its essentiality, deleterious impact towards cell survival is known under Mn stress. The fluorescent dyes Laurdan and diphenylhexatriene were used to assess changes in membrane fluidity both in the head group and hydrophobic core region of the membrane, respectively. Mn-rigidified membranes composed of the anionic phospholipids, phosphatidic acid, phosphatidylglycerol, cardiolipin, and phosphatidylserine. Strong binding resulted in large shifts of the phase transition temperature. The increase was in the order phosphatidylserine > phosphatidylglycerol > cardiolipin, and in all cases, saturated analogues > mono-unsaturated forms. Dynamic light scattering measurements revealed that Mn caused extensive aggregation of liposomes composed of saturated analogues of phosphatidic acid and phosphatidylserine, whilst the mono-unsaturated analogue had significant membrane swelling. Increased membrane rigidity may interfere with permeability of ions and small molecules, possibly disrupting cellular homeostasis. Moreover, liposome size changes could indicate fusion, which could also be detrimental to cellular transport. Overall, this study provided further understanding into the effects of Mn with biomembranes, whereby the altered membrane properties are consequential to the proper structural and signalling functions of membrane lipids.

Water at charged interfaces

The ubiquity of aqueous solutions in contact with charged surfaces and the realization that the molecular-level details of water-surface interactions often determine interfacial functions and properties relevant in many natural processes have led to intensive research. Even so, many open questions remain regarding the molecular picture of the interfacial organization and preferential alignment of water molecules, as well as the structure of water molecules and ion distributions at different charged interfaces. While water, solutes and charge are present in each of these systems, the substrate can range from living tissues to metals. This diversity in substrates has led to different communities considering each of these types of aqueous interface. In this Review, by considering water in contact with metals, oxides and biomembranes, we show the essential similarity of these disparate systems. While in each case the classical mean-field theories can explain many macroscopic and mesoscopic observations, it soon becomes apparent that such theories fail to explain phenomena for which molecular properties are relevant, such as interfacial chemical conversion. We highlight the current knowledge and limitations in our understanding and end with a view towards future opportunities in the field.

Acidity across the interface from the ocean surface to sea spray aerosol

Sea spray aerosol, produced through breaking waves, is one of the largest sources of environmental particles. Once in the atmosphere, sea spray aerosol influences cloud formation, serves as microenvironments for multiphase atmospheric chemical reactions, and impacts human health. All of these impacts are affected by aerosol acidity. Here we show that freshly emitted sea spray aerosol particles become highly acidic within minutes as they are transferred across the ocean−air interface. These results have important implications for atmospheric chemistry and climate, including aerosol/gas partitioning, heterogeneous reactions, and chemical speciation at the surface and within sea spray aerosol.

Aerosols impact climate, human health, and the chemistry of the atmosphere, and aerosol pH plays a major role in the physicochemical properties of the aerosol. However, there remains uncertainty as to whether aerosols are acidic, neutral, or basic. In this research, we show that the pH of freshly emitted (nascent) sea spray aerosols is significantly lower than that of sea water (approximately four pH units, with pH being a log scale value) and that smaller aerosol particles below 1 μm in diameter have pH values that are even lower. These measurements of nascent sea spray aerosol pH, performed in a unique ocean−atmosphere facility, provide convincing data to show that acidification occurs “across the interface” within minutes, when aerosols formed from ocean surface waters become airborne. We also show there is a correlation between aerosol acidity and dissolved carbon dioxide but no correlation with marine biology within the seawater. We discuss the mechanisms and contributing factors to this acidity and its implications on atmospheric chemistry.

Direct Quantification of the Effect of Ammonium on Aerosol Droplet pH

Ammonium is an important atmospheric constituent that dictates many environmental processes. The impact of the ammonium ion concentration on 10-50 μm aerosol droplet pH was quantified using pH nanoprobes and surface-enhanced Raman spectroscopy (SERS). Sample solutions were prepared by mixing 1 M ammonium sulfate (AS), ammonium nitrate (AN), sodium sulfate (SS), or sodium nitrate (SN) solutions with 1 M phosphate buffer (PB) at different volume ratios. Stable pH values were measured for pure PB, AS, and AN droplets at different concentrations. The centroid pH of 1 M PB droplets was ∼11, but when PB was systematically replaced with ammonium (AS- or AN-PB), the centroid pH within the droplets decreased from ≈11 to 5.5. Such a decrease was not observed in sodium (SS- or SN-PB) droplets, and no pH differences were observed between sulfate and nitrate salts. Ammonia partitioning to the gas phase in ammonium-containing droplets was evaluated to be negligible. Raman sulfate peak (∼980 cm^-1) intensity measurements and surface tension measurements were conducted to investigate changes in ion distribution. The pH difference between ammonium-containing droplets and ammonium-free droplets is attributed to the alteration of the ion distribution in the presence of ammonium.

Insights into the behavior of nonanoic acid and its conjugate base at the air/water interface through a combined experimental and theoretical approach

The partitioning of medium-chain fatty acid surfactants such as nonanoic acid (NA) between the bulk phase and the air/water interface is of interest to a number of fields including marine and atmospheric chemistry. However, questions remain about the behavior of these molecules, the contributions of various relevant chemical equilibria, and the impact of pH, salt and bulk surfactant concentrations. In this study, the surface adsorption of nonanoic acid and its conjugate base is quantitatively investigated at various pH values, surfactant concentrations and the presence of salts. Surface concentrations of protonated and deprotonated species are dictated by surface-bulk equilibria which can be calculated from thermodynamic considerations. Notably we conclude that the surface dissociation constant of soluble surfactants cannot be directly obtained from these experimental measurements, however, we show that molecular dynamics (MD) simulation methods, such as free energy perturbation (FEP), can be used to calculate the surface acid dissociation constant relative to that in the bulk. These simulations show that nonanoic acid is less acidic at the surface compared to in the bulk solution with a pK a shift of 1.1 ± 0.6, yielding a predicted surface pK a of 5.9 ± 0.6. A thermodynamic cycle for nonanoic acid and its conjugate base between the air/water interface and the bulk phase can therefore be established. Furthermore, the effect of salts, namely NaCl, on the surface activity of protonated and deprotonated forms of nonanoic acid is also examined. Interestingly, salts cause both a decrease in the bulk pK a of nonanoic acid and a stabilization of both the protonated and deprotonated forms at the surface. Overall, these results suggest that the deprotonated medium-chain fatty acids under ocean conditions can also be present within the sea surface microlayer (SSML) present at the ocean/atmosphere interface due to the stabilization effect of the salts in the ocean. This allows the transfer of these species into sea spray aerosols (SSAs). More generally, we present a framework with which the behavior of partially soluble species at the air/water interface can be predicted from surface adsorption models and the surface pK a can be predicted from MD simulations.

Hydrogen-Bond-Driven Chemical Separations: Elucidating the Interfacial Steps of Self-Assembly in Solvent Extraction

Chemical separations, particularly liquid extractions, are pervasive in academic and industrial laboratories, yet a mechanistic understanding of the events governing their function are obscured by interfacial phenomena that are notoriously difficult to measure. In this work, we investigate the fundamental steps of ligand self-assembly as driven by changes in the interfacial H-bonding network using vibrational sum frequency generation. Our results show how the bulk pH modulates the interfacial structure of extractants at the buried oil/aqueous interface via the formation of unique H-bonding networks that order and bridge ligands to produce self-assembled aggregates. These extended H-bonded structures are key to the subsequent extraction of Co²⁺ from the aqueous phase in promoting micelle formation and subsequent ejection of the said micelle into the oil phase. The combination of static and time-resolved measurements reveals the events underlying complexities of liquid extractions at high [Co²⁺]:[ligand] ratios by showing an evolution of interfacially assembled structures that are readily tuned on a chemical basis by altering the compositions of the aqueous phase. The results of this work point to new principles to design-applied separations through the manipulation of surface charge, electrostatic screening, and the associated H-bonding networks that arise at the interface to facilitate organization and subsequent extraction.

Influence of Ca2+ on the surface behavior of phosphatidic acid and its mixture with diacylglycerol pyrophosphate at different pHs

The signaling lipids phosphatidic acid (PA) and diacylglycerol pyrophosphate (DGPP) are involved in regulating the stress response in plants. PA and DGPP are anionic lipids consisting of a negatively charged phosphomonoester or pyrophosphate group attached to diacylglycerol, respectively. Changes in the pH modulate the protonation of their head groups modifying the interaction with other effectors. Here, we examine in a controlled system how the presence of Ca²⁺ modulates the surface organization of dioleyl diacylglycerol pyrophosphate (DGPP) and its interaction with dioleoyl phosphatidic acid (DOPA) at different pHs. Both lipids formed expanded monolayers at pH 5 and 8. At acid and basic pHs, monolayers formed by DOPA or DGPP became denser when Ca²⁺ was added to the subphase. At pH 5, Ca²⁺ also induced an increase of surface potential of both lipids. Conversely, at pH 8 the effects induced by the presence of Ca²⁺ on the surface potential were reversed. Mixed monolayers of DOPA and DGPP showed a non-ideal behavior. The addition of even tiny amounts of DGPP to DOPA films caused a reduction of the mean molecular area. This effect was more evident at pH 8 compared to pH 5. Our finding suggests that low amounts of DGPP in an film enriched in DOPA could lead to a local increase in film packing with a concomitant change in the local polarization, further regulated by local pH. This fact may have implications for the assigned role of PA as a pH-sensing phospholipid or during its interaction with proteins.

Lipid shape determination of detergent solubilization in mixed-lipid liposomes

The effects of lipid charge and head group size on liposome partitioning by detergents is an important consideration for applications such as liposomal drug delivery or proteoliposome formation. Yet, the solubilization of mixed-lipid liposomes, those containing multiple types of lipids, by detergents has received insufficient attention. This study examines the incorporation into and subsequent dissolution of mixed-lipid liposomes comprised of both egg phosphatidylcholine (ePC) and egg phosphatidic acid (ePA) by the detergent Triton-X100 (TX). Liposomes were prepared with mixtures of the two lipids, ePC and ePA, at molar ratios from 0 to 1, then step-wise solubilized with TX. Changes in turbidity, size distribution, and molar heat power at constant temperature throughout the solubilization process were assessed. The data suggest that the difference in lipid shapes (shape factors = 0.74 and 1.4 [1,2]) affects packing in membranes, and hence influences how much TX can be incorporated before disruption. As such, liposomes containing the observed ratios of ePA incorporated higher concentrations of TX before initiating dissolution into detergent and lipid mixed-micelles. The cause was concluded to be increased mismatching in the bilayer from the conical shape of ePA compared to the cylindrical shape of ePC. Additionally, the degree to which ePA is approximated as conical versus cylindrical was modulated with pH. It was confirmed that less conical ePA behaved more similarly to ePC than more conical ePA. The understanding gained here on lipid shape in liposome incorporation of TX enables research to use in vitro liposomes that more closely mimic native membranes.

Titration of Aerosol pH through Droplet Coalescence

The pH of aqueous aerosols, as well as cloud and fog droplets, has an important influence on the chemistry that takes place within these unique microenvironments. Utilizing conjugate acid/base pairs to infer pH changes, we investigate, for the first time, changes in aerosol pH upon coalescence. In particular, we show that the pH within individual aqueous aerosols that are ∼8 μm in diameter can be titrated via droplet coalescence in an aerosol optical tweezer. Using sulfate/bisulfate and carbonate/bicarbonate as model systems, the pH of trapped aerosols is determined before and after introduction of smaller aerosols containing a strong acid. The pH change upon coalescence with the smaller, acidic aerosol is calculated using specific ion interaction theory. Furthermore, we show that the pH of an individual aerosol can be altered along a fairly wide range of pH values, paving the way for future studies requiring rigorous pH control of an aqueous aerosol.

Molecular-level origin of the carboxylate head group response to divalent metal ion complexation at the air-water interface

We exploit gas-phase cluster ion techniques to provide insight into the local interactions underlying divalent metal ion-driven changes in the spectra of carboxylic acids at the air-water interface. This information clarifies the experimental findings that the CO stretching bands of long-chain acids appear at very similar energies when the head group is deprotonated by high subphase pH or exposed to relatively high concentrations of Ca2+ metal ions. To this end, we report the evolution of the vibrational spectra of size-selected [Ca2+·RCO2-]+·(H2O) n=0to12 and RCO2-·(H2O) n=0to14 cluster ions toward the features observed at the air-water interface. Surprisingly, not only does stepwise hydration of the RCO2- anion and the [Ca2+·RCO2-]+ contact ion pair yield solvatochromic responses in opposite directions, but in both cases, the responses of the 2 (symmetric and asymmetric stretching) CO bands to hydration are opposite to each other. The result is that both CO bands evolve toward their interfacial asymptotes from opposite directions. Simulations of the [Ca2+·RCO2-]+·(H2O) n clusters indicate that the metal ion remains directly bound to the head group in a contact ion pair motif as the asymmetric CO stretch converges at the interfacial value by n = 12. This establishes that direct metal complexation or deprotonation can account for the interfacial behavior. We discuss these effects in the context of a model that invokes the water network-dependent local electric field along the C-C bond that connects the head group to the hydrocarbon tail as the key microscopic parameter that is correlated with the observed trends.

Surfactant Charge Modulates Structure and Stability of Lipase-Embedded Monolayers at Marine-Relevant Aerosol Surfaces

Lipases, as well as other enzymes, are present and active within the sea surface microlayer (SSML). Upon bubble bursting, lipases partition into sea spray aerosol (SSA) along with surface-active molecules such as lipids. Lipases are likely to be embedded in the lipid monolayer at the SSA surface and thus have the potential to influence SSA interfacial structure and chemistry. Elucidating the structure of the lipid monolayer at SSA interfaces and how this structure is altered upon interaction with a protein system like lipase is of interest, given the importance of how aerosols interact with sunlight, influence cloud formation, and provide surfaces for chemical reactions. Herein, we report an integrated experimental and computational study of Burkholderia cepacia lipase (BCL) embedded in a lipid monolayer and highlight the important role of electrostatic, rather than hydrophobic, interactions as a driver for monolayer stability. Specifically, we combine Langmuir film experiments and molecular dynamics (MD) simulations to examine the detailed interactions between the zwitterionic dipalmitoylphosphatidylcholine (DPPC) monolayer and BCL. Upon insertion of BCL from the underlying subphase into the lipid monolayer, it is shown that BCL permeates and largely disorders the monolayer while strongly interacting with zwitterionic DPPC molecules, as experimentally observed by Langmuir adsorption curves and infrared reflectance absorbance spectroscopy. Explicitly solvated, all-atom MD is then used to provide insights into inter- and intramolecular interactions that drive these observations, with specific attention to the formation of salt bridges or ionic-bonding interactions. We show that after insertion into the DPPC monolayer, lipase is maintained at high surface pressures and in large BCL concentrations by forming a salt-bridge-stabilized lipase-DPPC complex. In comparison, when embedded in an anionic monolayer at low surface pressures, BCL preferentially forms intramolecular salt bridges, reducing its total favorable interactions with the surfactant and partitioning out of the monolayer shortly after injection. Overall, this study shows that the structure and dynamics of lipase-embedded SSA surfaces vary based on surface charge and pressure and that these variations have the potential to differentially modulate the properties of marine aerosols.

Interactions of Monovalent and Divalent Cations with Cardiolipin Monolayers

Cardiolipin is a mitochondrial phospholipid with four alkyl chains and two phosphate moieties. Tetramyristoyl cardiolipin (TMCL, (14:0)₄CL) monolayers at the air-water interface are characterized by compression isotherms, which show a liquid expanded/liquid condensed phase transition. The phase transition surface pressure π_c depends on the composition of the aqueous solution. In a calculation, this is attributed to the electrostatic double layer, which is induced by the head groups of the model membrane, and competitive ion binding. The intrinsic binding constant is large for protons ( K_H = 10 L/mol) and small for monovalent cations ( K_M (Na⁺, K⁺, Cs⁺) = 10^-3 L/mol). The different intrinsic binding constants explain the non-monotonic behavior of π_c on increasing the salt concentration: raising the monovalent salt concentration increases π_c by charging the TMCL monolayer until 0.1 mol/L, then screening effects dominate and decrease π_c by reducing the electrostatic repulsion between lipid head groups. When at fixed 0.15 mol/L NaCl concentration, the concentration of divalent cations is increased, π_c decreases. The intrinsic binding constants of divalent cations follow the sequence Sr²⁺ < Mg²⁺ < Mn²⁺ ≈ Zn²⁺ ≈ Ca²⁺ ( K_D,Ca = 1.2 L/mol). The predictive power of the calculations was tested with different solutions.

Subtle chemical modification for enrichment of Fmoc-amino acid at a phospholipid interface

Amino acids including the Fmoc group (9-fluorenylmethyloxycarbonyl) are bioinspired molecules that display intriguing features in self-assembly and biological applications. The influence of a delicate chemical modification between Fmoc-F and Fmoc-Y on the interaction with a phospholipid surface was analyzed. Langmuir monolayers of the 1,2-dimyristoyl-sn-glycero-3-phosphate (DMPA) phospholipid were used to mimic the eukaryotic cell membrane. In situ Brewster angle microscopy and UV-vis reflection spectroscopy provided insights on the effect of the Fmoc-amino acid derivatives on the DMPA phospholipid. The formation of H-bonds between the Fmoc-Y and the DMPA molecules was assessed, demonstrating the crucial role of the hydroxyl group of Fmoc-Y in enhancing the interaction with biosurfaces.

A modest chemical modification of the Fmoc-amino acids led to enhanced interaction with a model surface for biomembrane.

Impacts of Lipase Enzyme on the Surface Properties of Marine Aerosols

Triacylglycerol lipases have recently been shown to be transferred from the ocean to the atmosphere in atmospheric sea spray aerosol (SSA). Lipases have the potential to alter the composition of SSA; however, the structure and properties of enzymes in the high salt, high ionic strength, and low pH conditions found in SSA have never been explored. Here, we study the dynamics of Burkholderia cepacia triacylglycerol lipase (BCL) at SSA model surfaces comprised of palmitic acid and dipalmitoylphosphatidic acid (DPPA), two commonly found lipids at SSA surfaces. Surface adsorption Langmuir isotherm experiments and all-atom explicit solvent molecular dynamics simulations together illuminate how and why BCL expands the ordering of lipids at palmitic acid surfaces the most at pH < 4 and the least in DPPA surfaces at pH 6. Taken together, these results represent a first glimpse into the complex interplay between lipid surface structure and protein dynamics within enzyme-containing aerosols.

Let there be light: stability of palmitic acid monolayers at the air/salt water interface in the presence and absence of simulated solar light and a photosensitizer

Long-chain fatty acid monolayers are known surfactants present at air/water interfaces. However, little is known about the stability of these long-chain fatty acid monolayers in the presence of solar radiation. Here we have investigated, for the first time, the stability of palmitic acid monolayers on salt water interfaces in the presence and absence of simulated solar light with and without a photosensitizer in the underlying salt subphase. Using surface sensitive probes to measure changes in the properties of these monolayers upon irradiation, we found that the monolayers become less stable in the presence of light and a photosensitizer, in this case humic acid, in the salt solution. The presence of the photosensitizer is essential in significantly reducing the stability of the monolayer upon irradiation. The mechanism for this loss of stability is due to interfacial photochemistry involving electronically excited humic acid and molecular oxygen reacting with palmitic acid at the interface to form more oxygenated and less surface-active species. These oxygenated species can then more readily partition into the underlying solution.

Thermodynamic versus non-equilibrium stability of palmitic acid monolayers in calcium-enriched sea spray aerosol proxy systems

Calcium ions bind to palmitic acid monolayers at the air–aqueous interface resulting in changes of both thermodynamic and non-equilibrium stability.