Carbon Nanotubes and Algal Polysaccharides To Enhance the Enzymatic Properties of Urease in Lipid Langmuir-Blodgett Films

Photoactivated Rose Bengal Triggers Phospholipid Hydroperoxidation and Late Apoptosis in Colorectal Cancer Cells

Rose Bengal (RB) is a promising photosensitizer (PS) for photodynamic therapy (PDT), but its application to colorectal carcinoma remains largely unexplored. Herein, we employ in vitro assays to demonstrate that incorporation of RB has substantial phototoxicity against Caco-2 cells, with more than 80% reduction in cell viability for 24 h incubation with 5 × 10-6 mol/L RB followed by irradiation. In contrast, RB had minimal toxicity without irradiation. The mechanisms of RB action were further elucidated using confocal fluorescence microscopy, Langmuir monolayers as cell membrane models, and flow cytometry to determine the cell death pathways. Flow cytometry revealed that the primary mode of cell death was late apoptosis. RB incorporation affected Caco-2 plasma membrane morphology under light irradiation, and membrane interactions were confirmed using Langmuir monolayers of Caco-2 lipid extracts. Incorporation of RB into the monolayers shifted the pressure-area isotherms toward larger molecular areas, especially at low surface pressures and increasing RB concentrations (1, 10, and 25 × 10-6 mol/L). RB adsorption also caused a decrease in the in-plane elasticity (Cs1-) of the Caco-2 monolayers, with a large increase in monolayer flexibility as RB concentration increased. According to polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS), the anionic RB interacted electrostatically with positively charged phospholipid groups. Moreover, the changes in surface area observed in the monolayers upon RB incorporation and irradiation could be attributed to hydroperoxidation reactions triggered by the generation of singlet oxygen (1O2). These findings indicate that RB may be used as a PS in the PDT of colorectal cancer, providing detailed insights into its mechanism of action and phototoxicity.

Using Carbon Nanotubes to Improve Enzyme Activity and Electroactivity of Fatty Acid Langmuir-Blodgett Film-Incorporated Galactose Oxidase for Sensing and Energy Storage Applications

Incorporating enzymes into nanostructured supercapacitor devices represents a groundbreaking advancement in energy storage. Enzyme catalysis using nanomaterials enhances performance, efficiency, and stability by facilitating precise charge transfer, while the nanostructure provides a high surface area and improved conductivity. This synergy yields eco-friendly, high-performance energy storage solutions crucial for diverse applications, from portable electronics to renewable energy systems. In this study, we harnessed the versatility of Langmuir-Blodgett films to create meticulously organized thin films with specific enzyme properties, coupled with carbon nanotubes, to develop biosupercapacitors. Langmuir monolayers were constructed with stearic acid, carbon nanotubes, and galactose oxidase. Following comprehensive characterization using tensiometric, rheological, morphological, and spectroscopic techniques, the monolayers were transferred to solid supports, yielding Langmuir-Blodgett films. These films exhibited superior performance, with persisting enzyme activity. However, increasing film thickness did not enhance enzymatic activity values, indicating a surface-driven process. Subsequently, we explored the electrochemical properties of the films, revealing stability compatible with supercapacitor applications. The introduction of carbon nanotubes demonstrated a higher capacitance, indicating the potential viability of the films for energy storage applications.

Life at the interface: Engineering bio-nanomaterials through interfacial molecular self-assembly

Interfacial self-assembly describes the directed organization of molecules and colloids at phase boundaries. Believed to be fundamental to the inception of primordial life, interfacial assembly is exploited by a myriad of eukaryotic and prokaryotic organisms to execute physiologic activities and maintain homeostasis. Inspired by these natural systems, chemists, engineers, and materials scientists have sought to harness the thermodynamic equilibria at phase boundaries to create multi-dimensional, highly ordered, and functional nanomaterials. Recent advances in our understanding of the biophysical principles guiding molecular assembly at gas-solid, gas-liquid, solid-liquid, and liquid-liquid interphases have enhanced the rational design of functional bio-nanomaterials, particularly in the fields of biosensing, bioimaging and biotherapy. Continued development of non-canonical building blocks, paired with deeper mechanistic insights into interphase self-assembly, holds promise to yield next generation interfacial bio-nanomaterials with unique, and perhaps yet unrealized, properties. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Graphene Oxide Modulating the Bioelectronic Properties of Penicillinase Immobilized in Lipid Langmuir-Blodgett Films

In this paper, graphene oxide was incorporated in penicillinase-lipid Langmuir monolayers and transferred to solid supports as Langmuir-Blodgett (LB) films so that the enzyme catalytic properties could be evaluated. Adsorption of penicillinase and graphene oxide on dimyristoylphosphatidic acid (DMPA) monolayers at the air-water interface was investigated by tensiometry, vibrational spectroscopy, and Brewster angle microscopy. The LB films were characterized by quartz crystal microbalance, infrared spectroscopy, luminescence spectroscopy, and atomic force microscopy. Enzyme activity was studied with UV-vis spectroscopy, and the feasibility of the supramolecular device nanostructured as ultrathin films was essayed as an optical sensor device. The presence of graphene oxide in the enzyme-lipid LB film not only tuned the catalytic activity of penicillinase but also helped conserve its enzyme activity after weeks. These results may be related not only to the molecular architecture provided by the film but also to the synergism between the compounds on the active layer, leading to a molecular architecture that allowed a fast analyte diffusion owing to a suitable molecular accommodation which also preserved the penicillinase activity. This work then demonstrates the feasibility of employing LB films composed of lipids, graphene oxide, and enzymes as optical devices for biosensing applications as a proof-of-concept experiment.

The Past and the Future of Langmuir and Langmuir-Blodgett Films

The Langmuir-Blodgett (LB) technique, through which monolayers are transferred from the air/water interface onto a solid substrate, was the first method to allow for the controlled assembly of organic molecules. With its almost 100 year history, it has been the inspiration for most methods to functionalize surfaces and produce nanocoatings, in addition to serving to explore concepts in molecular electronics and nanoarchitectonics. This paper provides an overview of the history of Langmuir monolayers and LB films, including the potential use in devices and a discussion on why LB films are seldom considered for practical applications today. Emphasis is then given to two areas where these films offer unique opportunities, namely, in mimicking cell membrane models and exploiting nanoarchitectonics concepts to produce sensors, investigate molecular recognitions, and assemble molecular machines. The most promising topics for the short- and long-term prospects of the LB technique are also highlighted.

Structural and viscoelastic properties of floating monolayers of a pectinolytic enzyme and their influence on the catalytic properties

HYPOTHESIS

The catalytic activity of enzymes immobilized in self-assembly systems as Langmuir-Blodgett (LB) films is influenced by molecular interactions dictated by the composition and viscoelasticity of the previous floating monolayers. We believe that the insertion of carbon nanotubes (CNT) in mixed polygalacturonase/lipid monolayers may influence intermolecular interactions and viscoelastic properties, being then possible to tune system stability and rheological properties, driving catalytic properties of the films for biosensing.

EXPERIMENTS

The physicochemical properties of the monolayers were investigated by tensiometry, surface potential, Brewster angle microscopy, infrared spectroscopy, and dilatational rheology. The monolayers were transferred to solid supports LB films and characterized by atomic force microscopy, quartz crystal microbalance, and fluorescence spectroscopy. The catalytic activity of the LB films was verified by colorimetric assay.

FINDINGS

The enzyme-CNT-lipid film had a catalytic activity at least twice as high as the pure enzyme owing to the synergy between the components, with the lipid acting as a protector matrix for the enzyme and the CNTs acting as an energy transfer facilitator. These results point to a proof-of-concept system, through which we can propose an alternative to achieve enhanced bio-inspired films with high control of the molecular architecture by using the LB approach.

Phosphatidylserine controls calcium phosphate nucleation and growth on lipid monolayers: A physicochemical understanding of matrix vesicle-driven biomineralization

Bone biomineralization is an exquisite process by which a hierarchically organized mineral matrix is formed. Growing evidence has uncovered the involvement of one class of extracellular vesicles, named matrix vesicles (MVs), in the formation and delivery of the first mineral nuclei to direct collagen mineralization. MVs are released by mineralization-competent cells equipped with a specific biochemical machinery to initiate mineral formation. However, little is known about the mechanisms by which MVs can trigger this process. Here, we present a combination of in situ investigations and ex vivo analysis of MVs extracted from growing-femurs of chicken embryos to investigate the role played by phosphatidylserine (PS) in the formation of mineral nuclei. By using self-assembled Langmuir monolayers, we reconstructed the nucleation core - a PS-enriched motif thought to trigger mineral formation in the lumen of MVs. In situ infrared spectroscopy of Langmuir monolayers and ex situ analysis by transmission electron microscopy evidenced that mineralization was achieved in supersaturated solutions only when PS was present. PS nucleated amorphous calcium phosphate that converted into biomimetic apatite. By using monolayers containing lipids extracted from native MVs, mineral formation was also evidenced in a manner that resembles the artificial PS-enriched monolayers. PS-enrichment in lipid monolayers creates nanodomains for local increase of supersaturation, leading to the nucleation of ACP at the interface through a multistep process. We posited that PS-mediated nucleation could be a predominant mechanism to produce the very first mineral nuclei during MV-driven bone/cartilage biomineralization.

Chain Cleavage of Bioinspired Bacterial Membranes Photoinduced by Eosin Decyl Ester

Photodynamic therapy (PDT) is promising for bacterial inactivation since cellular internalization of photosensitizers (PS) is not crucial for the treatment effectiveness. Photoinduced damage in the lipid envelope may already induce microbial inactivation, which requires PS capable of easily penetrating into the membrane. Herein, we report on the insertion of the PS eosin decyl ester (EosDec) into Langmuir films of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), 1,2-dioleoyl-sn-glycero-3-phospho-(1'-rac-glycerol) (DOPG), and cardiolipin (CLP) used as mimetic systems of bacterial membranes. Surface pressure isotherms and polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) indicated that the hydrophobic nature of EosDec favored deeper penetration in all the phospholipid monolayers. The incorporation of EosDec led to monolayer expansion, especially in the anionic DOPG and CLP owing to repulsive electrostatic interactions, and induced disorder in the lipid chains. Light irradiation of DOPE, DOPG, and CLP monolayers containing EosDec increased the rate of material loss to the subphase, which is attributed to cleavage of lipid chains triggered by contact-dependent reactions between excited states of EosDec and lipid unsaturations. The latter is key for membrane permeabilization and efficiency in microbial inactivation.

Insertion of carbon nanotubes in Langmuir-Blodgett films of stearic acid and asparaginase enhancing the catalytic performance

In this paper, carbon nanotubes (CNT) were adsorbed on stearic acid (SA) Langmuir monolayers to serve as matrices for the incorporation of asparaginase. The interaction between the components at the air-water interface was evaluated by surface pressure-area isotherms, surface potential-area isotherms, polarization-modulation reflection absorption infrared spectroscopy (PM-IRRAS), and Brewster angle microscopy (BAM). The enzyme expanded the monolayers and changed the thermodynamic and electrical properties of the SA-CNT monolayers, as detected with the isotherms. PM-IRRAS spectra showed that the enzyme keeps its secondary structure when adsorbed at the monolayers and also alters the morphology of the air-water interface, as identified with BAM. The hybrid floating films were transferred to solid supports through the Langmuir-Blodgett (LB) technique, and the cotransfer of the enzyme was confirmed with fluorescence spectroscopy. The catalytic activity of asparaginase in the LB films was studied with UV-vis spectroscopy, which showed that the presence of CNT in the enzyme-lipid LB film not only tuned the catalytic activity, but also helped conserve its enzyme activity after weeks, showing higher persisting values of activity. UV-vis spectroscopy also showed that the catalytic activity is dependent basically on the enzyme molecules present on the surface of the LB films since multilayer films did not provide a proportional increase of enzyme activity. These results are related to the synergism between the compounds on the active layer, leading to a molecular architecture that allowed the adequate molecular accommodation of the analyte with the catalytic sites of the enzyme, which also preserved the asparaginase activity. This work then demonstrates the feasibility of employing LB films composed of fatty acids, CNT, and enzymes as devices for biosensing applications.

Conjugated Polymers Blended with Lipids and Galactosidase as Langmuir-Blodgett Films To Control the Biosensing Properties of Nanostructured Surfaces

The structure of enzymes must be conserved when incorporated in nanoelectronic devices because their activity determines the function of the device as sensors. Among the systems that can retain their conformational structures, Langmuir-Blodgett (LB) films can be useful to exploit the construction of bioelectronic devices organized at the molecular level because biological and polymeric materials can be coupled as ultrathin films for biosensors and actuators. In this paper, we immobilized a β-galactosidase enzyme in the LB films of stearic acid and the conjugated polymer poly[(9,9-dioctylfluorene)- co-thiophene]. After the characterization of the floating films using tensiometry, vibrational spectroscopy, and Brewster angle microscopy, they were transferred to solid supports as LB films, and the catalytic activity of the enzyme could be preserved as analyzed using UV-vis spectroscopy. We noted that the presence of a supramolecular structure formed in the LB films not only conserved the enzyme activity but also exhibited regular and distinctive output signals in all molecular architectures employed in this work. These results are related to the synergism between the compounds on the active layer associated with a surface morphology that facilitated the analyte diffusion because of an adequate molecular accommodation of all components. This work then demonstrates the viability of employing LB films composed of lipids, enzymes, and synthetic polymers as devices for biosensing applications.

Adsorption behavior of DNA on phosphatidylcholine at the air-water interface

In this paper, the adsorption behavior of DNA on 1,2-dipalmitoyl-sn-glycero-3- phosphocholine (DPPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) mixed lipid monolayers had been studied at the air-water interface through the surface pressure-area curves (π-A), adsorption curves (π/π₀-t), excess mean area (∆A_exc), excess Gibbs free energy (∆G_ex) and the atomic force microscopy (AFM). π-A isotherms showed that the curves moved to larger mean molecular area after DNA added into subphase, however, the curves shifted to smaller mean molecular area when the concentration of DNA was higher than 1.2 μg/mL. The result of adsorption curves indicated that DNA molecules were spread by combining with polar head groups of lipids except the concentration of DNA was 0.4 μg/mL. ∆A_exc and ∆G_ex demonstrated that DNA enlarged the interval between DPPC and POPC, and the strongest position happened at the concentration of DNA was 1.2 μg/mL. These phenomena might be the steric hindrance between DNA molecules. Morphology of surface observed by AFM was agreement with the results above, which verified our conclusion from a more intuitive aspect. This work provides useful theoretical basis for the development of novel DNA delivery materials.