Antibody-Binding, Antifouling Surface Coatings Based on Recombinant Expression of Zwitterionic EK Peptides

Organosilica Nanosensors for Monitoring Spatiotemporal Changes in Oxygen Levels in Bacterial Cultures

Oxygen plays a central role in aerobic metabolism, and while many approaches have been developed to measure oxygen concentration in biological environments over time, monitoring spatiotemporal changes in dissolved oxygen levels remains challenging. To address this, we developed a ratiometric core-shell organosilica nanosensor for continuous, real-time optical monitoring of oxygen levels in biological environments. The nanosensors demonstrate good steady state characteristics (KpSV = 0.40 L/mg, R2 = 0.95) and respond reversibly to changes in oxygen concentration in buffered solutions and report similar oxygen level changes in response to bacterial cell growth (Escherichia coli) in comparison to a commercial bulk optode-based sensing film. We further demonstrated that the oxygen nanosensors could be distributed within a growing culture of E. coli and used to record oxygen levels over time and in different locations within a static culture, opening the possibility of spatiotemporal monitoring in complex biological systems.

Poly(Glutamic Acid-Lysine) Hydrogels with Alternating Sequence Resist the Foreign Body Response in Rodents and Non-Human Primates

The foreign body response (FBR) to implanted biomaterials and biomedical devices can severely impede their functionality and even lead to failure. The discovery of effective anti-FBR materials remains a formidable challenge. Inspire by the enrichment of glutamic acid (E) and lysine (K) residues on human protein surfaces, a class of zwitterionic polypeptide (ZIP) hydrogels with alternating E and K sequences to mitigate the FBR is prepared. When subcutaneously implanted, the ZIP hydrogels caused minimal inflammation after 2 weeks and no obvious collagen capsulation after 6 months in mice. Importantly, these hydrogels effectively resisted the FBR in non-human primate models for at least 2 months. In addition, the enzymatic degradability of the gel can be controlled by adjusting the crosslinking degree or the optical isomerism of amino acid monomers. The long-term FBR resistance and controlled degradability of ZIP hydrogels open up new possibilities for a broad range of biomedical applications.

Sandwich assay for β-lactoglobulin in infant food formula based on a hierarchically architectured antifouling capture probe and fluorescent recognition probe

Tracing the presence of allergenic β-lactoglobulin (β-Lg) in infant foods is an urgent need, but the interference from the protein-rich matrix often hampered the detection accuracy. Here, we developed a sandwich assay for β-Lg in infant food formula based on a hierarchically architectured antifouling capture probe and fluorescent recognition probe. The antifouling capture probe was constructed from the polydopamine-coated magnetic particles (Fe3O4@PDA), which was modified with repeated glutamic acid-lysine (EK) antifouling peptide and aptamer towards β-Lg. The spatial arrangement of these ligands on the Fe3O4@PDA surface was carefully tailored. Furthermore, a fluorescent recognition probe based on aptamer-modified silica-doped carbon quantum dot was developed to explore a sandwich assay for β-Lg with the capture probe. The sandwich assay was proved to have high potential in detecting β-Lg in commercially available infant food samples. The work provided a new approach to developing detection methods with matrix interference-resistant properties.

Polypeptides as alternatives to PEGylation of therapeutic agents

INTRODUCTION

Due to the concerns raised by the extensive application of PEGylation, polypeptides have stood out as excellent candidates with adequate biocompatibility and biodegradability with tunable hydrophilicity.

AREAS COVERED

In this review, polypeptides with the potential to replace PEGylation have been summarized and their application has been reviewed, including XTEN, PASylation, polysarcosine, zwitterion polypeptides, ELPylation, etc. Besides their strengths, the remaining challenges have also been discussed and the future perspectives have been provided.

EXPERT OPINION

Polypeptides have been applied in the designing of peptide/protein drugs as well as nanomedicines, and some of the pharmaceutics have made it into the clinical trials and got approved. These polypeptides showed similar hydrophilic properties to PEGylation, which increased the hydrodynamic volumes of protein drugs, reduced kidney elimination, decreased protein-polymer interaction and potentially improved the drug delivery efficiency due to the extended circulation time in the system. Moreover, they demonstrated superior biodegradability and biocompatibility, compensating for the deficiencies for polymers such as PEG.

pH-Activated Dissolvable Polymeric Coatings to Reduce Biofouling on Electrochemical Sensors

Implantable electrochemical sensors that enable the real-time detection of significant biomarkers offer huge potential for the enhancement and personalisation of therapies; however, biofouling is a key challenge encountered by any implantable system. This is particularly an issue immediately after implantation, when the foreign body response and associated biofouling processes are at their most active in passivating a foreign object. Here, we present the development of a sensor protection and activation strategy against biofouling, based on coatings consisting of a pH-triggered, dissolvable polymer, that covered a functionalised electrode surface. We demonstrate that reproducible delayed sensor activation can be achieved, and that the length of this delay can be controlled by the optimisation of coating thickness, homogeneity and density through tuning of the coating method and temperature. Comparative evaluation of the polymer-coated and uncoated probe-modified electrodes in biological media revealed significant improvements in their anti-biofouling characteristics, demonstrating that this offers a promising approach to the design of enhanced sensing devices.

Development of Multifunctional Commercial Pure Titanium-Polyethylene Glycol Drug-Eluting Substrates with Enhanced Optical and Antithrombotic Properties

PURPOSE

Development of multifunctional advanced stent implants (metal/polymer composite)-drug-eluting stents with superior material and optical properties is still a challenge. In this research work, multifunctional metal-polymer composite drug-eluting substrates (DES) for stent application were developed by using commercially pure titanium (cpTi) and polyethylene glycol (PEG).

METHODS

Surface modifications on titanium substrates were carried out by sodium hydroxide under various concentrations; 5M (6 and 24 h) and 10M (6 and 24 h). It induces a nanoporous structure which facilitates the larger area for encapsulation of the drug, Aspirin (ASA) via intermolecular forces followed by polymer coating of PEG (MW-20,000) by physical adsorption process, which is structured as layer-by-layer gathering.

RESULTS

The developed cpTi-PEG DES were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), optical energy bandgap, static contact angle measurement, antithrombotic and drug release studies. The development of sodium titanate oxide prompted surface nano-features revealed by SEM and XRD. Moreover, FTIR confirms the presence of ASA and PEG functional groups over the cpTi surface. Drug release studies fitted with Ritger-Peppas kinetic model (≤ 60%), which indicates the super case II transport mechanisms (n > 1). Further UV-visible absorbance spectrum was quantified by the Tauc plot, which shows the broadening of the energy bandgap (E_g). In addition, the shrink in blood clots was more around the Tib2/ASA/PEG.Please confirm the inserted city name in affiliations [1,2] are correct and amend if necessary.Yes, city name "Rourkela" is correct.

CONCLUSION

Developed cpTi-PEG DES has improved optical properties and prevent thrombus formation which suggesting it a potential substrate to overcome prime clinical challenges.

An ultrasensitive biosensor for prostate specific antigen detection in complex serum based on functional signal amplifier and designed peptides with both antifouling and recognizing capabilities

The development of biosensors capable of averting biofouling and detecting biomarkers in complex biological media remains a challenge. Herein, an ultralow fouling and highly sensitive biosensor based on specifically designed antifouling peptides and a signal amplification strategy was designed for prostate specific antigen (PSA) detection in human serum. A low fouling layer of poly(ethylene glycol) (PEG) doped the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) was electrodeposited on the electrode surface, followed by the immobilization of streptavidin and further attachment of biotin-labelled peptides. The peptide was designed to include PSA specific recognition domain (HSSKLQK) and antifouling domain (PPPPEKEKEKE), and the terminal of the peptide was functionalized with -SH group. DNA functionalized gold nanorods (DNA/AuNRs) were then attached to the electrode, and methylene blue (MB) molecules were adsorbed to the DNA to form the signal amplifier. In the presence of PSA, the peptide was specifically cleaved and resulted in the loss of AuNRs together with DNA and MB, and thus significant decrease of the current signal. The biosensor exhibited a low limit of detection (LOD) of 0.035 pg mL^-1 (S/N = 3), with a wide linear range from 0.10 pg mL^-1 to 10.0 ng mL^-1, and it was able to detect PSA in real human serum owing to the presence of the antifouling peptides, indicating great potential of the constructed biosensor for practical application.

Molecular Simulations of Zwitterlation-induced Conformation and Dynamics Variation of Glucagon-like Peptide-1 and Insulin

Zwitterionic materials have shown their ability to improve the circulation time and stability of proteins. Zwitterionic peptides present unique potential because genetic technology can fuse them to any wild-type protein....

Detection of Chymotrypsin Using Peptide Sensor Based on Graphene Oxide Modified with Sulfhydryl Group and Gold Nanoparticles

In this study, GO modified with sulfhydryl group was prepared by thiolation on the surface of GO, which makes a meaningful material. GO with sulfhydryl group combined with gold nanoparticles,...

Anti-fouling peptide functionalization of ultraflexible neural probes for long-term neural activity recordings in the brain

Implantable neural probes constitute an essential tool for neuronal activity recordings in basic neuroscience and also hold great promise for the development of neuroprosthesis to restore lost motor or sensory functions of the body. However, conventional neural probes are susceptible to biofouling because of their physicochemical mismatch with neural tissues, resulting in signal degradation in chronic studies. Here, we describe an ultraflexible neural probe (uFNP) with anti-fouling zwitterionic peptide modification for long-term stable neural activity recordings. The anti-fouling zwitterionic peptide consists of two parts: negatively charged glutamic acid (E) and positively charged lysine (K) formed EKEKEK (EK) head to create a hydration layer that resists protein adsorption on the microelectrodes, and a fragment of laminin formed IKVAV tail to increase the adhesion of the microelectrodes to neuronal cells. We demonstrate that EK-IKVAV modified uFNPs can allow for stable neuronal activity recordings over 16 weeks. Immunohistological studies confirm that EK-IKVAV functionalized uFNPs could induce greatly reduced neuronal cell loss. Collectively, these results suggest that the anti-fouling zwitterionic peptide functionalization of uFNPs provide a promising route to construct biocompatible and stable neural interfaces.

Stability and Performance Study of Fluorescent Organosilica pH Nanosensors

Long-term stability and function are key challenges for optical nanosensors operating in complex biological environments. While much focus is rightly placed on issues related to specificity, sensitivity, reversibility, and response time, many nanosensors are not capable of transducing accurate results over prolonged time periods. Sensors could fail over time due to the degradation of scaffold material, degradation of signaling dyes and components, or a combination of both. It is critical to investigate how such degradative processes affect sensor output, as the consequences could be severe. Herein, we used fluorescent core-shell organosilica pH nanosensors as a model system, incubating them in a range of common aqueous solutions over time at different temperatures, and then searched for changes in fluorescence signal, particle size, and evidence of silica degradation. We found that these ratiometric nanosensors produced stable optical signals after aging for 30 days at 37 °C in standard saline buffers with and without 10% fetal bovine serum, and without any evidence of material degradation. Next, we evaluated their performance as real-time pH nanosensors in bacterial suspension cultures, observing a close agreement with a pH electrode for control nanosensors, yet observing obvious deviations in signal based on the aging conditions. The results show that while the organosilica scaffold does not degrade appreciably over time, careful selection of dyes and further systematic investigations into the effects of salt and protein levels are required to realize long-term stable nanosensors.

Electrochemical sensing interfaces based on hierarchically architectured zwitterionic peptides for ultralow fouling detection of alpha fetoprotein in serum

Herein, an electrochemical sensing platform based on zwitterionic peptide with a hierarchical structure was constructed for ultralow fouling and highly sensitive protein quantification. Through the combination of CPPPPEKEKEKEK and CPPPPEKEKEK peptides, hierarchical antifouling peptide brushes were formed and exhibited excellent antifouling property, which can be further modified with alpha fetoprotein (AFP) aptamer to achieve highly sensitive detection of AFP. The hierarchical peptide brush-based sensor system achieved an AFP quantification range from 1.0 fg mL^-1 to 1.0 ng mL^-1, with a very low limit of detection as low as 0.59 fg mL^-1. In addition, due to the superior antifouling property of the newly designed hierarchical peptide brushes, the electrochemical biosensor supported the quantification of AFP in solutions with a high concentration of nonspecific proteins without sacrifice in sensitivity. It is worth noting that the constructed antifouling biosensor ensured quantitative recruitment of AFP in clinical serum samples with acceptable accuracy when compared with the commonly used method in the hospital. The strategy of constructing sensing interfaces based on designed hierarchical peptide brushes provided an effective way to develop biosensors with both excellent antifouling capability and high sensitivity.

In Vivo Electrochemical Sensors for Neurochemicals: Recent Update

In vivo electrochemical sensing based on implantable microelectrodes is a strong driving force of analytical neurochemistry in brain. The complex and dynamic neurochemical network sets stringent standards of in vivo electrochemical sensors including high spatiotemporal resolution, selectivity, sensitivity, and minimized disturbance on brain function. Although advanced materials and novel technologies have promoted the development of in vivo electrochemical sensors drastically, gaps with the goals still exist. This Review mainly focuses on recent attempts on the key issues of in vivo electrochemical sensors including selectivity, tissue response and sensing reliability, and compatibility with electrophysiological techniques. In vivo electrochemical methods with bare carbon fiber electrodes, of which the selectivity is achieved either with electrochemical techniques such as fast-scan cyclic voltammetry and differential pulse voltammetry or based on the physiological nature will not be reviewed. Following the elaboration of each issue involved in in vivo electrochemical sensors, possible solutions supported by the latest methodological progress will be discussed, aiming to provide inspiring and practical instructions for future research.

Characterization of Key Bio-Nano Interactions between Organosilica Nanoparticles and Candida albicans

Nanoparticle-cell interactions between silica nanomaterials and mammalian cells have been investigated extensively in the context of drug delivery, diagnostics, and imaging. While there are also opportunities for applications in infectious disease, the interactions of silica nanoparticles with pathogenic microbes are relatively underexplored. To bridge this knowledge gap, here, we investigate the effects of organosilica nanoparticles of different sizes, concentrations, and surface coatings on surface association and viability of the major human fungal pathogen Candida albicans. We show that uncoated and PEGylated organosilica nanoparticles associate with C. albicans in a size and concentration-dependent manner, but on their own, do not elicit antifungal activity. The particles are also shown to associate with human white blood cells, in a similar trend as observed with C. albicans, and remain noncytotoxic toward neutrophils. Smaller particles are shown to have low association with C. albicans in comparison to other sized particles and their association with blood cells was also observed to be minimal. We further demonstrate that by chemically immobilizing the clinically important echinocandin class antifungal drug, caspofungin, to PEGylated nanoparticles, the cell-material interaction changes from benign to antifungal, inhibiting C. albicans growth when provided in high local concentration on a surface. Our study provides the foundation for defining how organosilica particles could be tailored for clinical applications against C. albicans. Possible future developments include designing biomaterials that could detect, prevent, or treat bloodstream C. albicans infections, which at present have very high patient mortality.

Antifouling (Bio)materials for Electrochemical (Bio)sensing

(Bio)fouling processes arising from nonspecific adsorption of biological materials (mainly proteins but also cells and oligonucleotides), reaction products of neurotransmitters oxidation, and precipitation/polymerization of phenolic compounds, have detrimental effects on reliable electrochemical (bio)sensing of relevant analytes and markers either directly or after prolonged incubation in rich-proteins samples or at extreme pH values. Therefore, the design of antifouling (bio)sensing interfaces capable to minimize these undesired processes is a substantial outstanding challenge in electrochemical biosensing. For this purpose, efficient antifouling strategies involving the use of carbon materials, metallic nanoparticles, catalytic redox couples, nanoporous electrodes, electrochemical activation, and (bio)materials have been proposed so far. In this article, biomaterial-based strategies involving polymers, hydrogels, peptides, and thiolated self-assembled monolayers are reviewed and critically discussed. The reported strategies have been shown to be successful to overcome (bio)fouling in a diverse range of relevant practical applications. We highlight recent examples for the reliable sensing of particularly fouling analytes and direct/continuous operation in complex biofluids or harsh environments. Opportunities, unmet challenges, and future prospects in this field are also pointed out.