Nanodiscs Generated from the Solvent Exchange of a Block Copolymer

Bifunctional additive-driven shape transitions of block copolymer particles through synergistic quaternization and protonation

Block copolymer (BCP) particles with tailored shapes and nanostructures hold promise for applications in cell adhesion, photonic system, and energy storage due to their unique optical and rheological properties. Conventional approaches relying on surfactant-mediated self-assembly often limit particle geometries to simple structures. Herein, we present a versatile approach to expand the morphology of poly(styrene-block-2-vinylpyridine) (PS-b-P2VP) BCP particles through the incorporation of 9-bromononanoic acid (BNA), a bifunctional additive that facilitates synergistic quaternization and protonation. Increasing the BNA-to-2VP molar ratio enhances P2VP hydrophilicity and decreases the pH value, driving dramatic shape transitions from onion-like spheres to tulip bulbs, ellipsoids, discs, and Janus cups. This morphological diversity is attributed to synergetic interfacial instability-driven water infiltration and pH-induced repulsion of protonated P2VP chains. Additives with a single functional group, however, yield limited morphologies, such as tulip bulbs or onion-like spheres. Notably, Janus cups fabricated via this strategy exhibit selective cargo-loading capabilities, highlighting the importance of precise control over the internal composition and structure of BCP particles.

Self-Assembly of Amorphous 2D Polymer Nanodiscs with Tuneable Size, pH-Responsive Degradation and Controlled Drug Release

Amphiphilic bottlebrush block copolymers (BBCs) with tadpole-like, coil-rod architecture can be used to self-assemble into functional polymer nanodiscs directly in water. The hydrophobic segments of the BBC were tuned via the ratio of ethoxy-ethyl glycidyl ether (EE) to tetrahydropyranyl glycidyl ether (TP) within the grafted polymer sidechains. In turn, this variation controlled the sizes, pH-responsiveness, and drug loading capacity of the self-assembled nanodiscs. Notably, as EE exhibited faster hydrolysis than TP, the nanodiscs featured variable degradation rates under mild acidic conditions, aiding small molecule release and time-dependent and complete degradation of discs into fully water-soluble copolymers. The nanodiscs demonstrated biocompatibility and cellular uptake by breast cancer cells, underscoring their potential development into drug delivery systems.

Lock and key: Quest to find the most compatible membrane mimetic for studying membrane proteins in native environment

Membrane proteins play crucial roles in cellular signal transduction, molecule transport, host-pathogen interactions, and metabolic processes. However, mutations, changes in membrane properties, and environmental factors can lead to loss of protein function. This results in impaired ligand binding and misfolded structures that prevent proteins from adopting their native conformation. Many membrane proteins are also therapeutic targets in various diseases, where drugs can either restore or inhibit their specific functions. Understanding membrane protein structure and function is vital for advancing cell biology and physiology. Experimental studies often involve extracting proteins from their native environments and reconstituting them in membrane mimetics like detergents, bicelles, amphipols, nanodiscs, and liposomes. These mimetics replicate aspects of native membranes, aiding in the study of protein behavior outside living cells. Scientists continuously explore new, more native-like membrane mimetics to improve experimental accuracy. This dynamic field involves evaluating the advantages and disadvantages of different mimetics and optimizing the reconstitution process to better mimic natural conditions.

Neutral Interface Directed 3D Confined Self-Assembly of Block Copolymer: Anisotropic Patterned Particles with Ordered Structures

Three-dimensional confined self-assembly (3D-CSA) of block copolymers (BCPs) is a distinctive and robust strategy that can yield colloidal polymer particles boasting ordered internal structures and diverse morphologies. The unique advantage of neutral interface lies in its ability to create anisotropic particles with surface patterns. The resulting unique polymer particles exhibit deformability under swelling, coupled with excellent spreadability and optical properties. These particles can also be used for fabrication of anisotropic nanoobjects or mesoporous particles via disassembly or serving as templates. This review comprehensively outlines the research advancements in neutral interface-guided 3D-CSA systems, including surfactant engineering, internal structure control, properties and future possibilities of anisotropic patterned particles.

Fabrication of Hierarchical Nanostructures Featuring Amplified Asymmetry Through Co-Assembly of Liquid Crystalline Block Copolymer and Chiral Amphiphiles

The widespread presence of hierarchical asymmetric structures in nature has sparked considerable interest because of their unique functionalities. These ingenious structures across multiple scales often emerge from the transfer and amplification of asymmetry from chiral molecules under various synergistic effects. However, constructing artificial chiral asymmetric structures, particularly in developing hierarchical multicomponent structures analogous to those formed in nature through synergistic non-covalent interactions, still presents tremendous challenges. Herein, we propose a co-assembly strategy to fabricate hierarchical chiral mesostructures by combining a liquid crystalline block copolymer (LC-BCP) with a small molecular amphiphile containing chiral alanine or phenylalanine as a linker. Through a classic solvent-exchange process, chiral amphiphiles embedded within LC-BCP finely regulate the LC ordering effect and facilitate transfer and amplification of asymmetry. Consequently, various co-assembled structures with significant hierarchical chirality features are obtained through synergetic effects. Remarkably, subtle alterations to the side groups of amino acids in the amphiphiles effectively adjust the hierarchical morphology transition. Moreover, the covalent bonding sequence of amino acids in the amphiphiles emerges as a critical factor governing the formation of hierarchical nanofibers and multilayered vesicles exhibiting a superhelical sense.

Self-Assembly of Rod-Coil Bottlebrush Copolymers into Degradable Nanodiscs with a UV-Triggered Self-Immolation Process

Polymer nanodiscs, especially with stimuli-responsive features, represent an unexplored frontier in the nanomaterial landscape. Such 2D nanomaterials are considered highly promising for advanced biomedicine applications. Herein, we designed a rod-coil copolymer architecture based on an amphiphilic, tadpole-like bottlebrush copolymer, which can directly self-assemble into core-shell nanodiscs in an aqueous environment. As the bottlebrush side chains are made of amorphous, UV-responsive poly(ethyl glyoxylate) (PEtG) chains, they can undergo rapid end-to-end self-immolation upon light irradiation. This triggered nanodisc disassembly can be used to boost small molecule release from the nanodisc core, which is further aided by a morphological change from discs to spheres.

Nanoscale polymer discs, toroids and platelets: a survey of their syntheses and potential applications

Polymer self-assembly has become a reliable and versatile workhorse to produce polymeric nanomaterials. With appropriate polymer design and monomer selection, polymers can assemble into shapes and morphologies beyond well-studied spherical and cylindrical micellar structures. Steadfast access to anisotropic polymer nanoparticles has meant that the fabrication and application of 2D soft matter has received increasing attention in recent years. In this review, we focus on nanoscale polymer discs, toroids, and platelets: three morphologies that are often interrelated and made from similar starting materials or common intermediates. For each morphology, we illustrate design rules, and group and discuss commonly used self-assembly strategies. We further highlight polymer compositions, fundamental principles and self-assembly conditions that enable precision in bottom-up fabrication strategies. Finally, we summarise potential applications of such nanomaterials, especially in the context of biomedical research and template chemistry and elaborate on future endeavours in this space.

Imaging Block-Selective Copolymer Solvation

Understanding individual-block solvation in self-assembled block copolymer systems is experimentally difficult, but this solvation underpins the assembly and disassembly observed at the bulk scale. Here, covalently attached viscosity-sensitive molecular rotors for fluorescence lifetime imaging microscopy uncover and quantitatively elucidate previously undisclosed differential block-selective responses toward solvation changes upon addition of DMSO and THF to self-assembled ROMP-based amphiphilic block copolymers. The sensitivity of this method provides unique information on block-selective solvent-triggered assembly and disassembly mechanisms, revealing behaviors invisible to or with superior sensitivity to traditional ¹H NMR spectroscopy. These experiments demonstrate an analytical method and provide a granular mechanistic understanding, both suitable for fine tuning block copolymer assembly and disassembly processes.

Formation and Transformation of Polystyrene-block-poly(2-vinylpyridine) Hexasomes in the Solvent Exchange

The generation of inverse micellar nanostructures, especially those with open channels, using commercially available diblock copolymers (BCP), is vital for their wide applications in drug delivery and catalyst templating. However, the rigid requirements for forming inverse morphologies, such as the highly asymmetric molecular structures, the semicrystalline motifs, and concentrated solutions of diblock copolymers, represent obstacles to the development of successful strategies. In this study, the inverse polystyrene-block-poly(2-vinylpyridine) (PS_30K-b-P2VP_8.5K) micelles, i.e., the hexasomes with p6mm lattice, were generated through a modified solvent exchange via adding d-tartaric acid (d-TA) in the nonsolvent. Various intermediate morphologies have been identified with the change of d-TA concentration. Interestingly, in the high d-TA concentration (∼20 mg/mL), the hexasomes with close-packed hoops changed to mesoporous spheres with regularly packed perpendicular cylindrical channels (V_D-TA: V_BCP 6:100), and further to the mesoporous spheres with gyri-like open pores (V_D-TA: V_BCP > 15:100) with the increasing acidity in the mixed solvent. This study presents a simple and economical pathway for fabricating PS_30K-b-P2VP_8.5K hexasomes and first demonstrates these hexasomes can be modified to the morphology with open channels that will benefit their further applications.

Noncovalent Postmodification Guided Reversible Compartmentalization of Polymeric Micelles

Compartmentalized micelles (CMs) are promising tailor-made soft matters that mimic natural designed structures and functions. Despite the structure of complex CMs, manipulating CM structures accessibly and reversibly remains elusive. Here, we report the fabrication of CMs via a generally valid noncovalent postmodification process. Starting from precursor micelles (PMs) based on one diblock copolymer, aromatic modification leads to the compartmentalization of PMs into well-defined spherical CMs. Control over compartment number, size and distribution in CMs, and segment distribution in their linear hierarchical assemblies is attained by simply tuning the postmodification degree and solvent composition. We also demonstrate the reversible transformation between PM and CMs during several heating-cooling cycles, which endows the micelles with potential in reversible functional transitions in situ close to nature's capability. Moreover, both hierarchically assembled or ill-structured micelles can rearrange into homogeneous CMs after one heating-cooling cycle, featuring the postmodification guided compartmentalization strategy with unprecedented micelle reproducibility.

Uniform Nanorods with Regioselective Distribution of Inorganic Nanoparticles Templated by 2D Block Copolymer Nanosheets

The inorganic/organic hybrid materials with regioselective distribution of functional inorganic nanoparticles (NPs) have received constant interest attributed to fascinating integrated properties. However, there remains a formidable challenge in realizing the regioselective distribution of NPs for the specific hybrid nanorods. Herein, we report the construction of uniform core-shell hybrid nanorods with the regioselective distribution of inorganic NPs by selectively disassembling the prepared NPs/polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP) hybrid nanosheets. Moreover, through precisely adjusting the parameters, such as complexation ability between the metal precursor and P4VP blocks, the protonation degree of P4VP blocks and complexation time, the NPs/polymer core-shell hybrid nanorod with the uniform distribution of NPs, and dumbbell-like hybrid nanorods with selective distribution of NPs at both ends can be obtained. This finding reveals a unique insight into the design of the anisotropic functional hybrid materials with the regioselective distribution of inorganic NPs.

Isothermal Titration Calorimetry Directly Measures the Selective Swelling of Block Copolymer Vesicles in the Presence of Organic Acid

Block copolymer (BCP) vesicles loaded with drug molecules may have a nonidentical swelling behavior due to the strong interactions between BCP vesicles and loaded molecules. A thermodynamic study of the swelling for such a system is of great importance in clarifying their pH-gated drug delivery behavior. In this study, the selective swelling of polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) vesicles in the presence of different acids was compared using dynamic light scattering, zeta-potential, and isothermal titration calorimetry (ITC) measurements. Transmission electron microscopy observation verified that these PS-b-P2VP vesicles were mainly multilamellar. Importantly, using the ITC measurement, we first compared the thermodynamic parameters, including ΔH, ΔG, and ΔS, association binding sites (N), and binding association constants (K _a) in the selective swelling of the PS-b-P2VP vesicles in low pH (pH ∼3.5), with or without a hydrogen bonding interaction. We observed that the existence of a hydrogen bonding interaction between tartaric acid/malic acid and PS-b-P2VP generates a limitation to the selective swelling of PS-b-P2VP vesicles, in which conditions will depend on the molecular structures of the organic acids and PS-b-P2VP. This work first provides a quantitative insight on the swelling of BCP vesicles in the presence of hydrogen bonding and highlights the power of ITC measurements for investigating the structural transformation of polymer nanostructures.

Shaping Block Copolymer Microparticles by pH-Responsive Core-Cross-Linked Polymeric Nanoparticles

Block copolymer microparticles with controllable morphology have drawn widespread attention owing to their promising applications in photonic materials, energy storage, and other areas. Hence, it is highly desired to achieve a controllable transformation of microparticle morphology. In this work, we report a simple method to shape the morphology of polystyrene-block-poly(dimethylsiloxane) (PS-b-PDMS) microparticles, by employing core-cross-linked polymeric nanoparticles (CNPs) as cosurfactants which are synthesized through cross-linking P4VP segment of PS-block-poly(4-vinylpyridine) (PS-b-P4VP). The addition of pH-responsive CNPs makes the shape of pH-inert PS-b-PDMS microparticles sensitive to pH value. The PS-b-PDMS microparticles transformed from elongated Janus pupa-like particles to onion-like particles by decreasing the pH value of the aqueous phase. The deformation mechanism is investigated by changing pH value, the weight fraction of CNPs, and surfactant property. This study provides a facile strategy to deform microparticles of pH-inert BCPs by tuning pH value, which is anticipated to be applicable to other non-pH-responsive BCP microparticles.