Temperature-Dependent Phase Behavior of the Thermoresponsive Polymer Poly(N-isopropylmethacrylamide) in an Aqueous Solution

Synthetic Reversible Fibrous Network Hydrogels Based on a Double-Helical Polyelectrolyte

The unique mechanical properties of fibrous networks in biological tissues have inspired the development of synthetic fibrous network hydrogels, yet few polymers can reversibly form such structures. Here, we report the first reversible fibrous network hydrogel composed of synthetic polyelectrolytes with extremely rigid conformation (persistence length is ∼1 µm), made up of double-helical poly(2,2'-disulfonyl-4,4'-benzidine terephthalamide) (PBDT) and tetrabutylphosphonium bromide ([P4444]Br). The hydrogel exhibits a unique sol-gel transition, triggered by the hydrophobicity increase of [P4444]Br above lower critical solution temperature (LCST). This drives PBDT aggregation into fibrous bundles through electrostatic interactions. These bundles grow and branch into a continuous network, with the molecular rigidity of PBDT's double-helix conformation being key to gel formation. The hydrogel displays strain-stiffening mechanical responses akin to biological systems and shows a significant hysteresis (21 °C) between heating and cooling cycles. Uniquely, the effects of salts on the transition temperature deviate from the Hofmeister series, highlighting coordination with sulfonate groups as the dominant factor. Leveraging its modulus change during gelation, the hydrogel was successfully applied as a spray coating on superhydrophobic vertical Teflon surfaces. This study broadens the scope of thermoreversible hydrogels introducing gelation mechanisms for rigid polyelectrolytes and demonstrates their potential in advanced coatings.

PNIPAM Mesoglobules in Dependence on Pressure

Poly(N-isopropylacrylamide) (PNIPAM) in aqueous solution forms mesoglobules above its cloud point temperature Tcp. While these are small and compact at atmospheric pressure, they are large and water-rich at high pressure. To identify the transition between these states, we employed optical microscopy and carried out isothermal pressure scans. Using very small angle neutron scattering, we determined the size and water content of the mesoglobules in pressure scans at different temperatures above Tcp. We observe a distinct transition at pressures of 35-55 MPa with the transition pressure depending on temperature. While the transition is smooth at high temperatures, i.e., far away from the coexistence line, it is abrupt at low temperatures, i.e., close to the coexistence line. Hence, at high temperatures, the swelling of the mesoglobules dominates, whereas at low temperatures, the coalescence of mesoglobules prevails. Subsequently decreasing the pressure results in a gradual deswelling of the mesoglobules at high temperature. In contrast, at low temperatures, small and compact mesoglobules form, but the large aggregates persist. We conclude that, on the time scale of the experiment, the disintegration of the large swollen aggregates into small and compact mesoglobules is only partially possible. Erasing the history by cooling the sample at the maximum pressure into the one-phase state does not result in qualitative changes for the behavior with the only difference that Fewer mesoglobules are formed when the pressure is decreased again. The newly identified transition line separates the low-pressure from the high-pressure regime.

Study on Thermally Induced Lignin Aggregation Kinetics for the Preparation of Uniformly Sized Lignin Nanoparticles in Water

Lignin nanoparticles (LNPs) present a potential avenue for the high-value utilization of lignin. However, the simple and ecofriendly method of thermally induced self-assembly for the preparation of LNPs has been overlooked due to a lack of sufficient understanding of the lignin aggregation mechanism. Therefore, this study focuses on the kinetics of thermally induced lignin aggregation. It was found that lignin aggregates formed at lower temperatures exhibit poor stability and are more prone to continuous growth through coalescence. This apparent contradiction with the conventional understanding of thermoresponsive polymers could be attributed to changes in the viscoelasticity of the lignin aggregates during phase separation. Based on this finding, we worked out strategies to optimize the preparation of LNPs in water through thermally induced self-assembly. Pure LNPs with well-defined interfaces and a minimum polydispersity index (PDI) of 0.12 were obtained by increasing the temperature to 125-150 °C. Furthermore, combined with noncovalent modification, LNPs with a PDI of 0.08 would even be formed at 80 °C. Notably, the resulting pure LNPs show potential for application in photonic crystal products that require excellent monodispersity. This study provides a new approach for the environmentally friendly preparation of LNPs with a controllable morphology.

Synthesis and thermally-induced gelation of interpenetrating nanogels

Thermally-induced in-situ gelation of polymers and nanogels is of significant importance for injectable non-invasive tissue engineering and delivery systems of drug delivery system. In this study, we for the first time demonstrated that the interpenetrating (IPN) nanogel with two networks of poly (N-isopropylacrylamide) (PNIPAM) and poly (N-Acryloyl-l-phenylalanine) (PAphe) underwent a reversible temperature-triggered sol-gel transition and formed a structural color gel above the phase transition temperature (Tp). Dynamic light scattering (DLS) studies confirmed that the Tp of IPN nanogels are the same as that of PNIPAM, independent of Aphe content of the IPN nanogels at pH of 6.5 ∼ 7.4. The rheological and optical properties of IPN nanogels during sol-gel transition were studied by rheometer and optical fiber spectroscopy. The results showed that the gelation time of the hydrogel photonic crystals assembled by IPN nanogel was affected by temperature, PAphe composition, concentration, and sequence of interpenetration. As the temperature rose above the Tp, the Bragg reflection peak of IPN nanogels exhibited blue shift due to the shrinkage of IPN nanogels. In addition, these colored IPN nanogels demonstrated good injectability and had no obvious cytotoxicity. These IPN nanogels will open an avenue to the preparation and thermally-induced in-situ gelation of novel NIPAM-based nanogel system.

Curcumin-loaded polymeric nanomaterials as a novel therapeutic strategy for Alzheimer's disease: A comprehensive review

Alzheimer's disease (AD) stands as a formidable challenge in modern medicine, characterized by progressive neurodegeneration, cognitive decline, and memory impairment. Despite extensive research, effective therapeutic strategies remain elusive. The antioxidant, anti-inflammatory, and neuroprotective properties of curcumin, found in turmeric, have demonstrated promise. The poor bioavailability and rapid systemic clearance of this drug limit its clinical application. This comprehensive review explores the potential of curcumin-loaded polymeric nanomaterials as an innovative therapeutic avenue for AD. It delves into the preparation and characteristics of diverse polymeric nanomaterial platforms, including liposomes, micelles, dendrimers, and polymeric nanoparticles. Emphasis is placed on how these platforms enhance curcumin's bioavailability and enable targeted delivery to the brain, addressing critical challenges in AD treatment. Mechanistic insights reveal how these nanomaterials modulate key AD pathological processes, including amyloid-beta aggregation, tau phosphorylation, oxidative stress, and neuroinflammation. The review also highlighted the preclinical studies demonstrate reduced amyloid-beta plaques and neuroinflammation, alongside improved cognitive function, while clinical trials show promise in enhancing curcumin's bioavailability and efficacy in AD. Additionally, it addresses the challenges of clinical translation, such as regulatory issues, large-scale production, and long-term stability. By synthesizing recent advancements, this review underscores the potential of curcumin-loaded polymeric nanomaterials to offer a novel and effective therapeutic approach for AD, aiming to guide future research and development in this field.

Molecular understanding of the self-assembly of an N-isopropylacrylamide delivery system for the loading and temperature-dependent release of curcumin

Global changes and drug abuse are forcing humanity to face various disease problems, and alternative therapies with safe natural substances have important research value. This paper combines various techniques in quantum chemical calculations and molecular simulations to provide molecular-level insight into the dynamics of the self-assembly of N-isopropylacrylamide (NIPAM) for loading curcumin (CUR). The results indicate that increasing the chain length of NIPAM molecules reduces their efficiency in encapsulating and locking CUR, and electrostatic interactions and van der Waals interactions are the main driving forces behind the evolution of system configurations in these processes. The isopropyl groups of NIPAM and the two phenolic ring planes of CUR are the main contact areas for the interaction between the two types of molecules. The thermosensitive effect of NIPAM can alter the distribution of isopropyl groups in NIPAM molecules around CUR. As a result, when the temperature rises from ambient temperature (300 K) to human characteristic temperature (310 K), the NIPAM-CUR interactions and radial distribution functions suggest that body temperature is more suitable for drug release. Our findings offer a vital theoretical foundation and practical guidance for researchers to develop temperature-sensitive drug delivery systems tailored for CUR, addressing its clinical application bottleneck.

Dynamic Behavior of Poly(N-isopropylmethacrylamide) in Neat Water and in Water/Methanol Mixtures

We investigate the collective dynamics of thermoresponsive polymer poly(N-isopropylmethacrylamide) (PNIPMAM) in aqueous solution and in water/methanol mixtures in the one-phase region. In neat water, the polymer concentration c is varied in a wide range around the overlap concentration c*, that is estimated at 23 g L-1. Using dynamic light scattering (DLS), two decays ("modes") are consistently observed in the intensity autocorrelation functions for c = 2-150 g L-1 with relaxation rates which are proportional to the square of the momentum transfer. Below c*, these are attributed to the diffusion of single chains and to clusters from PNIPMAM that are formed due to hydrophobic interactions. Above c*, they are assigned to the diffusion of the chain segments between overlap points and to long-range concentration fluctuations. From the temperature-dependent behavior of the overall scattering intensities and the dynamic correlation lengths of the fast mode, the critical temperatures and the scaling exponents are determined. The latter are significantly lower than the static values predicted by mean-field theory, which may be related to the presence of the large-scale inhomogeneities. The effect of the cosolvent methanol on the dynamics is investigated for polymer solutions having c = 30 g L-1 and methanol volume fractions in the solvent mixtures of up to 60 vol %. The phase diagram was established by differential scanning calorimetry. The slow mode detected by DLS becomes significantly weaker as methanol is added, i.e., the solutions become more homogeneous. Beyond the minimum of the coexistence line, which is located at 40-50 vol % of methanol, the dynamics is qualitatively different from the one at lower methanol contents. Thus, going from the water-rich to the methanol-rich side of the miscibility gap, the change of interaction of the PNIPMAM chains with the two solvents has a severe effect on the collective dynamics.

Effect of Embedded g-C3N4 Nanosheets on the Hydration and Thermal Response Behavior of Cross-Linked Thermoresponsive Copolymer Films

The effect of embedded graphitic carbon nitride (g-C3N4) nanosheets on hydration and thermal response behavior of cross-linked thermoresponsive poly(di(ethylene glycol) methyl ether methacrylate-co-oligo(ethylene glycol) methyl ether methacrylate), abbreviated as P(MA-co-MA300), thin films is probed by white light interferometry. Compared with that of the cross-linked pure P(MA-co-MA300) films, the surface roughness of the cross-linked hybrid films is slightly increased, which is caused by the minor aggregation of g-C3N4 nanosheets during the spin-coating process. After exposure to a water vapor atmosphere, both cross-linked pure and hybrid films can absorb water and swell. However, the introduction of g-C3N4 not only induces a larger hydration extent but also triggers a nonlinear transition behavior upon heating. This prominent difference might be related to the residual hydrophilic groups (-NH2 and N-H) on the surface of g-C3N4 nanosheets, which enhance the interaction and absorption capability for water molecules in the hybrid films. Upon further increasing the amount of embedded g-C3N4 nanosheets in films, more hydrogen bonds are formed and a larger hydration extent of films is observed. To break all of the hydrogen bonds in films, a higher transition temperature (TT) is required. The observed hydration and transition behaviors of hybrid films can be used to design hydrogel-based films for hydrogen evolution or wastewater treatment.

Review of the Perspectives and Study of Thermo-Responsive Polymer Gels and Applications in Oil-Based Drilling Fluids

Thermoresponsive polymer gels are a type of intelligent material that can react to changes in temperature. These materials possess excellent innovative properties and find use in various fields. This paper systematically analyzes the methods for testing and regulating phase transition temperatures of thermo-responsive polymer gels based on their response mechanism. The report thoroughly introduces the latest research on thermo-responsive polymer gels in oil and gas extraction, discussing their advantages and challenges across various environments. Additionally, it elucidates how the application limitations of high-temperature and high-salt conditions can be resolved through process optimization and material innovation, ultimately broadening the scope of application of thermo-responsive polymer gels in oil and gas extraction. The article discusses the technological development and potential applications of thermo-responsive polymer gels in oil-based drilling fluids. This analysis aims to offer researchers in the oil and gas industry detailed insights into future possibilities for thermo-responsive polymer gels and to provide helpful guidance for their practical use in oil-based drilling fluids.

Multifunctional thermosensitive hydrogel based on alginate and P(NIPAM-co-HEMIN) composites for accelerated diabetic wound healing

Non-healing wounds in patients with diabetes are a concerning issue associated with amputation and a high mortality rate. These wounds are exacerbated by oxidative stress and microbial infections resulting from hyperglycemia. Therefore, advanced materials for repairing wound beds must be identified urgently. This paper introduces a topically applicable composite hydrogel with thermosensitive properties and presents the antibacterial and antioxidant activities in mice with diabetes-induced wounds. This composite is developed by combining poly N-isopropyl acrylamide (NIPAM)-copolymerized HEMIN (NIPAM-co-HEMIN) and amine-modified alginate (ALG-EDA) biomaterials, with Ag nanoparticles (AgNPs) incorporated into the system as an antibacterial agent. Results of antibacterial tests show that the p(NIPAM-co-HEMIN)/ALG-EDA/AgNP composite system is effective against E. coli and S. aureus. Additionally, the AgNP composite exhibits low cellular toxicity in NIH3T3 and CT-2A cell lines. The wounds in diabetic mice treated with the composite system healed in <12 days, and the composite system accelerated the healing process by increasing collagen synthesis. In conclusion, the biocomposite reported herein is highly promising for repairing diabetic skin wounds and treating infections caused by bacterial microbes.

Thermoresponsive and co-nonsolvency behavior of poly(N-vinyl isobutyramide) and poly(N-isopropyl methacrylamide) as poly(N-isopropyl acrylamide) analogs in aqueous media

Sets of the nonionic polymers poly(N-vinyl isobutyramide) (pNVIBAm) and poly(N-isopropyl methacrylamide) (pNIPMAm) are synthesized by radical polymerization covering the molar mass range from about 20,000 to 150,000 kg mol−1, and their thermoresponsive and solvent-responsive behaviors in aqueous solution are studied. Both polymers feature a lower critical solution temperature (LCST) apparently of the rare so-called type II, as characteristic for their well-studied analogue poly(N-isopropyl acrylamide) (pNIPAm). Moreover, in analogy to pNIPAm, both polymers exhibit co-nonsolvency behavior in mixtures of water with several co-solvents, including short-chain alcohols as well as a range of polar aprotic solvents. While the cloud points of the aqueous solutions are a few degrees higher than those for pNIPAm and increase in the order pNIPAm < pNVIBAm < pNIPMAm, the co-nonsolvency behavior becomes less pronounced in the order pNIPAm > pNVIBAm > pNIPMAm. Exceptionally, pNIPMAm does not show co-nonsolvency in mixtures of water and N,N-dimethylformamide.

Graphical Abstract

Electrospinning of Aqueous Solutions of Atactic Poly(N-isopropylacrylamide) with Physical Gelation

The phase diagram of a given polymer solution is used to determine the solution’s electrospinnability. We constructed a phase diagram of an aqueous solution of atactic poly(N-isopropylacrylamide) (a-PNIPAM) based on turbidity measurements and the rheological properties derived from linear viscoelasticity. Several important transition temperatures were obtained and discussed, including the onset temperature for concentration fluctuations T1, gel temperature Tgel, and binodal temperature Tb. On heating from 15 °C, the one-phase a-PNIPAM solution underwent pronounced concentration fluctuations at temperatures above T1. At higher temperatures, the thermal concentration fluctuations subsequently triggered the physical gelation process to develop a macroscopic-scale gel network at Tgel before the phase separation at Tb. Thus, the temperature sequence for the transition is: T1 < Tgel < Tb~31 °C for a given a-PNIPAM aqueous solution. Based on the phase diagram, a low-temperature electrospinning process was designed to successfully obtain uniform a-PNIPAM nanofibers by controlling the solution temperature below T1. In addition, the electrospinning of an a-PNIPAM hydrogel at Tgel < T < Tb was found to be feasible considering that the elastic modulus of the gel was shown to be very low (ca. 10−20 Pa); however, at the jet end, jet whipping was not seen, though the spitting out of the internal structures was observed with high-speed video. In this case, not only dried nanofibers but also some by-products were produced. At T > Tb, electrospinning became problematic for the phase-separated gel because the enhanced gel elasticity dramatically resisted the stretching forces induced by the electric field.

Poly(sulfobetaine)-Based Diblock Copolymer Thin Films in Water/Acetone Atmosphere: Modulation of Water Hydration and Co-nonsolvency-Triggered Film Contraction

The water swelling and subsequent solvent exchange including co-nonsolvency behavior of thin films of a doubly thermo-responsive diblock copolymer (DBC) are studied via spectral reflectance, time-of-flight neutron reflectometry, and Fourier transform infrared spectroscopy. The DBC consists of a thermo-responsive zwitterionic (poly(4-((3-methacrylamidopropyl) dimethylammonio) butane-1-sulfonate)) (PSBP) block, featuring an upper critical solution temperature transition in aqueous media but being insoluble in acetone, and a nonionic poly(N-isopropylmethacrylamide) (PNIPMAM) block, featuring a lower critical solution temperature transition in water, while being soluble in acetone. Homogeneous DBC films of 50-100 nm thickness are first swollen in saturated water vapor (H₂O or D₂O), before they are subjected to a contraction process by exposure to mixed saturated water/acetone vapor (H₂O or D₂O/acetone-d6 = 9:1 v/v). The affinity of the DBC film toward H₂O is stronger than for D₂O, as inferred from the higher film thickness in the swollen state and the higher absorbed water content, thus revealing a pronounced isotope sensitivity. During the co-solvent-induced switching by mixed water/acetone vapor, a two-step film contraction is observed, which is attributed to the delayed expulsion of water molecules and uptake of acetone molecules. The swelling kinetics are compared for both mixed vapors (H₂O/acetone-d6 and D₂O/acetone-d6) and with those of the related homopolymer films. Moreover, the concomitant variations of the local environment around the hydrophilic groups located in the PSBP and PNIPMAM blocks are followed. The first contraction step turns out to be dominated by the behavior of the PSBP block, whereas the second one is dominated by the PNIPMAM block. The unusual swelling and contraction behavior of the latter block is attributed to its co-nonsolvency behavior. Furthermore, we observe cooperative hydration effects in the DBC films, that is, both polymer blocks influence each other's solvation behavior.

Salt-Dependent Phase Transition Behavior of Doubly Thermoresponsive Poly(sulfobetaine)-Based Diblock Copolymer Thin Films

The water vapor-induced swelling, as well as subsequent phase-transition kinetics, of thin films of a diblock copolymer (DBC) loaded with different amounts of the salt NaBr, is investigated in situ. In dilute aqueous solution, the DBC features an orthogonally thermoresponsive behavior. It consists of a zwitterionic poly(sulfobetaine) block, namely, poly(4-(N-(3'-methacrylamidopropyl)-N,N-dimethylammonio) butane-1-sulfonate) (PSBP), showing an upper critical solution temperature, and a nonionic block, namely, poly(N-isopropylmethacrylamide) (PNIPMAM), exhibiting a lower critical solution temperature. The swelling kinetics in D₂O vapor at 15 °C and the phase transition kinetics upon heating the swollen film to 60 °C and cooling back to 15 °C are followed with simultaneous time-of-flight neutron reflectometry and spectral reflectance measurements. These are complemented by Fourier transform infrared spectroscopy. The collapse temperature of PNIPMAM and the swelling temperature of PSBP are found at lower temperatures than in aqueous solution, which is attributed to the high polymer concentration in the thin-film geometry. Upon inclusion of sub-stoichiometric amounts (relative to the monomer units) of NaBr in the films, the water incorporation is significantly increased. This increase is mainly attributed to a salting-in effect on the zwitterionic PSBP block. Whereas the addition of NaBr notably shifts the swelling temperature of PSBP to lower temperatures, the collapse temperature of PNIPMAM remains unaffected by the presence of salt in the films.

Influence of Molecular Weight Distribution on the Thermoresponsive Transition of Poly(N-isopropylacrylamide)

A series of poly(N-isopropylacrylamide) (PNIPAm) homopolymers with narrow molecular weight distributions (MWDs) is prepared via photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. The thermal transition temperature of these polymer samples is analyzed via turbidity measurements in water/N,N'-dimethylformamide mixtures, which show that the cloud point temperatures are inversely proportional to the weight average molecular weight (M_w ). Binary mixtures of the narrowly distributed PNIPAm samples are also prepared and the statistical parameters for the MWDs of these blends are determined. Very interestingly, for binary blends of the PNIPAm samples, the thermoresponsive transition is not only dependent on the M_w , which has been shown previously, but also on higher order statistical parameters of the MWDs. Specifically, at very high values of skewness and kurtosis, the polymer blends deviate from a single sharp thermoresponsive transition toward a broader thermal response, and eventually to a regime of two more distinct transitions. This work highlights the importance of in-depth characterization of polymer MWDs for thermoresponsive polymers.

Recent Advances in Thermoresponsive OEGylated Poly(amino acid)s

Thermoresponsive polymers have been widely studied in the past decades due to their potential applications in biomedicine, nanotechnology, and so on. As is known, poly(N-isopropylacrylamide) (PNIPAM) and poly(oligo(ethylene glycol)methacrylates) (POEGMAs) are the most popular thermoresponsive polymers, and have been studied extensively. However, more advanced thermoresponsive polymers with excellent biocompatibility, biodegradability, and bioactivity also need to be developed for biomedical applications. OEGylated poly(amino acid)s are a kind of novel polymer which are synthesized by attaching one or multiple oligo(ethylene glycol) (OEG) chains to poly(amino acid) (PAA).These polymers combine the great solubility of OEG, and the excellent biocompatibility, biodegradability and well defined secondary structures of PAA. These advantages allow them to have great application prospects in the field of biomedicine. Therefore, the study of OEGylated poly(amino acid)s has attracted more attention recently. In this review, we summarized the development of thermoresponsive OEGylated poly(amino acid)s in recent years, including the synthesis method (such as ring-opening polymerization, post-polymerization modification, and Ugi reaction), stimuli-response behavior study, and secondary structure study. We hope that this periodical summary will be more conducive to design, synthesis and application of OEGylated poly(amino acid)s in the future.

Length-Scale Effects in Hydrophobic Polymer Collapse Transitions

The study of molecular mechanisms for cosolvent-driven hydrophobic polymer collapse transitions in water is of pivotal importance in the field of smart responsive materials. Computational studies together with complementary experimental data have led to the discovery and understanding of new phenomena in recent years. However, elementary mechanisms, generally contributing to polymer coil-globule transitions in different classes of cosolvent-water systems, remain elusive due to compensating energy-entropy effects. Herein, I discuss the role of length scales in polymer solubility problems. New ideas on surfactant mechanisms are discussed based on examples in which these mechanisms drive polymer swelling or collapse.

Formation of Single Double-Layered Coacervate of Poly(N,N-diethylacrylamide) in Water by a Laser Tweezer

We demonstrate liquid-liquid phase separation involving both coacervation and coil-to-globule phase transition of a thermoresponsive polymer. By focusing a near-infrared laser beam into an aqueous solution of poly(N-isopropylacrylamide) (PNIPAM), a single phase-separated polymer microdroplet can be formed and stably trapped at the focal point. Such droplet formation is induced by a local elevation in temperature (induced by a photothermal effect) and an optical force. The technique allows us to selectively analyze a single polymer droplet trapped at the focal point. In this study, we applied this technique to poly(N,N-diethylacrylamide) (PDEA) in water and generated a double-layered PDEA droplet. Such an inhomogeneous and complex microstructure has not been previously observed both in steady-state heating of a PDEA solution and in the PNIPAM system. Moreover, we used micro-Raman spectroscopy to clarify that PDEA underwent dehydration due to a coil-to-globule phase transition. Despite this, the polymer concentration (C_poly) of the trapped PDEA droplet was very low and was around 30 wt %. C_poly depended on the molecular weight of PDEA and the laser power that regulates the temperature elevation. These results strongly indicate that PDEA undergoes coacervation in addition to a coil-to-globule phase transition. This study will help provide us with a fundamental understanding of the phase separation mechanisms of thermoresponsive polymers.

Thermoresponsive Polypeptoids

Stimuli-responsive polymers have been widely studied in many applications such as biomedicine, nanotechnology, and catalysis. Temperature is one of the most commonly used external triggers, which can be highly controlled with excellent reversibility. Thermoresponsive polymers exhibiting a reversible phase transition in a controlled manner to temperature are a promising class of smart polymers that have been widely studied. The phase transition behavior can be tuned by polymer architectures, chain-end, and various functional groups. Particularly, thermoresponsive polypeptoid is a type of promising material that has drawn growing interest because of its excellent biocompatibility, biodegradability, and bioactivity. This paper summarizes the recent advances of thermoresponsive polypeptoids, including the synthetic methods and functional groups as well as their applications.