Nucleation and Growth of P(NDI2OD-T2) Nanowires via Side Chain Ordering and Backbone Planarization

Increasing the Content of Edge-On Orientation to Improve the Hole Mobility of IDTBT Film by the van der Waals Interaction between the Side Chain and Alkane Additives

The molecular orientation in the conjugated polymer film critically impacts the performance of organic electronic devices. As for organic field-effect transistors (OFETs), the edge-on orientation is beneficial for efficient interchain charge transport. However, for the near amorphous indacenodithiophene-co-benzothiadiazole (IDTBT) film, the face-on orientation was dominated in the drop cast thin film. Herein, we proposed a strategy to increase the edge-on orientation in IDTBT films by inserting n-hexadecane (16C) additives with a high boiling point between the side chains. Because the 16C additives had a similar structure to that of the side chain, the 16C additives were distributed around the side chain in the nucleation stage. Then, the backbone aggregated quickly with the nuclei formation speed (k) nearly twice as high as that without the 16C additives. In the growth stage, some face-on nuclei turned to edge-on nuclei due to the van der Waals interactions between the side chain and 16C additives. This was verified by the results of in situ GIWAXS, where the intensity of (010) decreased and the intensity of (100) increased in the out-of-plane direction. The edge-on orientation content of the film with 16C additives reached 57%, higher than that of the neat film (33%). Moreover, compared to the neat IDTBT film, the lamellar packing distance of the film with 16C additives increased the lamellar packing distance from 16.97 to 23.26 Å and the π-π stacking distance decreased from 4.36 to 4.19 Å. The hole mobility of the film with 16C additives (3.24 ± 0.19 cm2 V-1 s-1) was higher than that of the neat film (0.94 ± 0.07 cm2 V-1 s-1).

Unraveling the Solution Aggregation Structures and Processing Resiliency of High-Efficiency Organic Photovoltaic Blends

The solution aggregation structure of conjugated polymers is crucial to the morphology and resultant optoelectronic properties of organic electronics and is of considerable interest in the field. Precise characterizations of the solution aggregation structures of organic photovoltaic (OPV) blends and their temperature-dependent variations remain challenging. In this work, the temperature-dependent solution aggregation structures of three representative high-efficiency OPV blends using small-angle X-ray/neutron scattering are systematically probed. Three cases of solution processing resiliency are elucidated in state-of-the-art OPV blends. The exceptional processing resiliency of high-efficiency PBQx-TF blends can be attributed to the minimal changes in the multiscale solution aggregation structure at elevated temperatures. Importantly, a new parameter, the percentage of acceptors distributed within polymer aggregates (Ф), for the first time in OPV blend solution, establishes a direct correlation between Ф and performance is quantified. The device performance is well correlated with the Kuhn length of the cylinder related to polymer aggregates L1 at the small scale and the Ф at the large scale. Optimal device performance is achieved with L1 at ≈30 nm and Ф within the range of 60 ± 5%. This study represents a significant advancement in the aggregation structure research of organic electronics.

Nanostructured Molecular Packing of Polymer Films Formed on Water Surfaces

In this study, we examined the nanostructured molecular packing and orientations of poly[[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)] (P(NDI2OD-T2)) films formed on water for the application of nanotechnology-based organic electronic devices. First, the nanoscale molecule-substrate interaction between the polymer and water was modulated by controlling the alkyl side chain length in NDI-based copolymers. Increasing alkyl side chain lengths induced a nanomorphological transition from face-on to edge-on orientation, confirmed by molecular dynamics simulations revealing nanostructural behavior. Second, the nanoscale intermolecular interactions of P(NDI2OD-T2) were controlled by varying the volume ratio of the high-boiling-point additive solvent in the binary solvent blends. As the additive solvent ratio increased, the nanostructured molecular orientation of the P(NDI2OD-T2) films on water changed remarkably from edge-on to bimodal with more face-on crystallites, thereby affecting charge transport. Our finding provides essential insights for precise nanoscale morphological control on water substrates, enabling the formation of high-performance polymer films for organic electronic devices.

Effect of solvent quality and sidechain architecture on conjugated polymer chain conformation in solution

Conjugated polymers (CPs) are solution-processible for various electronic applications, where solution aggregation and dynamics could impact the morphology in the solid state. Various solvents and solvent mixtures have been used to dissolve and process CPs, but few studies have quantified the effect of solvent quality on the solution behavior of CPs. Herein, we performed static light scattering and small-angle X-ray scattering combined with molecular dynamics (MD) simulation to investigate CP solution behaviors with solvents of varying quality, including poly(3-alkylthiophene) (P3ATs) with various sidechain lengths from -C4H9 to -C12H25, poly[bis(3-dodecyl-2-thienyl)-2,2'-dithiophene-5,5'-diyl] (PQT-12) and poly[2,5-bis(3-dodecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT-12). We found that chlorobenzene is a better solvent than toluene for various CPs, which was evident from the positive second virial coefficient A2 ranging from 0.3 to 4.7 × 10-3 cm3 mol g-2 towards P3ATs. For P3ATs in non-polar solvents, longer sidechains promote more positive A2, indicating a better polymer-solvent interaction, wherein A2 for toluene increases from -5.9 to 1.4 × 10-3 cm3 mol g-2, and in CB, A2 ranges from 1.0 to 4.7 × 10-3 cm3 mol g-2 when sidechain length increases from -C6H13 to -C12H25. Moreover, PQT-12 and PBTTT-12 have strong aggregation tendencies in all solutions, with an apparent positive A2 (∼0.5 × 10-3 cm3 mol g-2) due to multi-chain aggregates and peculiar chain folding. These solvent-dependent aggregation behaviors can be well correlated to spectroscopy measurement results. Our coarse-grained MD simulation results further suggested that CPs with long, dense, and branched sidechains can achieve enhanced polymer-solvent interaction, and thus enable overall better solution dispersion. This work provides quantitative insights into the solution behavior of conjugated polymers that can guide both the design and process of CPs toward next-generation organic electronics.

Unfolding the Correlation between Solution Aggregation and Solid-State Crystal Orientation in Donor-Acceptor Copolymers via Solvent Additive Processing

Tailoring the crystal orientation of donor-acceptor (D-A) copolymers is vital for boosting the performance of optoelectronic devices. Despite recent advances in controlling the crystal orientation of D-A copolymers in films, the investigation into their aggregates in solution and the correlation between the solution aggregates and solid-state crystal orientation has been limited. Herein, an effective solvent additive strategy is reported for tuning solution aggregates and the consequent solid-state structures of poly{[N,N'-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5'-(2,2'-bithiophene)} (P(NDI2OD-T2)). Specifically, the addition of 1-decanethiol (10-thiol) to the P(NDI2OD-T2) chloroform solution promoted the aggregation of P(NDI2OD-T2) chains because of the improved planarization of the backbones, which changed their crystal orientation in the film from coexisting edge-on and face-on to dominant edge-on when produced by drop-casting. The mechanism of this crystal orientation transformation is elucidated based on the interaction between 10-thiol and the side chains of P(NDI2OD-T2). The optical properties of P(NDI2OD-T2) films with different crystalline structures are closely correlated. Notably, the 10-thiol-enabled facile tailoring of the crystal orientation in P(NDI2OD-T2) can be readily applied to other D-A copolymers of interest. The findings of this study highlight a robust solvent additive strategy for regulating solution aggregates and crystal orientation in D-A copolymer films, which have applications in many optoelectronic devices.

Visualizing the multi-level assembly structures of conjugated molecular systems with chain-length dependent behavior

It remains challenging to understand the structural evolution of conjugated polymers from single chains to solvated aggregates and film microstructures, although it underpins the performance of optoelectrical devices fabricated via the mainstream solution processing method. With several ensemble visual measurements, here we unravel the morphological evolution process of a model system of isoindigo-based conjugated molecules, including the hidden molecular assembly pathways, the mesoscale network formation, and their unorthodox chain dependence. Short chains show rigid chain conformations forming discrete aggregates in solution, which further grow to form a highly ordered film that exhibits poor electrical performance. In contrast, long chains exhibit flexible chain conformations, creating interlinked aggregates networks in solution, which are directly imprinted into films, forming interconnective solid-state microstructure with excellent electrical performance. Visualizing multi-level assembly structures of conjugated molecules provides a deep understanding of the inheritance of assemblies from solution to solid-state, accelerating the optimization of device fabrication.

Density of States Engineering of n-Doped Conjugated Polymers for High Charge Transport Performances

Charge transport of conjugated polymers in functional devices closely relates to their density of states (DOS) distributions. However, systemic DOS engineering for conjugated polymers is challenging due to the lack of modulated methods and the unclear relationship between DOS and electrical properties. Here, the DOS distribution of conjugated polymers is engineered to enhance their electrical performances. The DOS distributions of polymer films are tailored using three processing solvents with different Hansen solubility parameters. The highest n-type electrical conductivity (39 ± 3 S cm^-1 ), the highest power factor (63 ± 11 µW m^-1 K^-2 ), and the highest Hall mobility (0.14 ± 0.02 cm² V^-1 s^-1 ) of the polymer (FBDPPV-OEG) are obtained in three films with three various DOS distributions, respectively. Through theoretical and experimental exploration, it is revealed that the carrier concentration and transport property of conjugated polymers can be efficiently controlled by DOS engineering, paving the way for rationally fabricating organic semiconductors.

Conjugated Polymers in Solution: A Physical Perspective

Excellent progress has been made in the optoelectronic properties of conjugated polymers by controlling solution-state aggregation. However, due to the wide variety and complex structures of conjugated polymers, it is still challenging to fully understand the complex aggregation process and microstructures both in solution and in the solid state. This Perspective focuses on the chain conformations and the aggregation of conjugated polymers in solution. We discuss the factors in detail which affect solution-state aggregation and microstructures from the perspective of polymer physics in solutions, including chemical structures and environmental conditions. Based on the understanding of multiple interactions of conjugated polymers in solution, strategies to regulate solid-state microstructures and obtain high-performance polymer-based devices from solution-state aggregation are summarized.

Crystallization of D-A Conjugated Polymers: A Review of Recent Research

D-A conjugated polymers are key materials for organic solar cells and organic thin-film transistors, and their film structure is one of the most important factors in determining device performance. The formation of film structure largely depends on the crystallization process, but the crystallization of D-A conjugated polymers is not well understood. In this review, we attempted to achieve a clearer understanding of the crystallization of D-A conjugated polymers. We first summarized the features of D-A conjugated polymers, which can affect their crystallization process. Then, the crystallization process of D-A conjugated polymers was discussed, including the possible chain conformations in the solution as well as the nucleation and growth processes. After that, the crystal structure of D-A conjugated polymers, including the molecular orientation and polymorphism, was reviewed. We proposed that the nucleation process and the orientation of the nuclei on the substrate are critical for the crystal structure. Finally, we summarized the possible crystal morphologies of D-A conjugated polymers and explained their formation process in terms of nucleation and growth processes. This review provides fundamental knowledge on how to manipulate the crystallization process of D-A conjugated polymers to regulate their film structure.

Not All Aggregates Are Made the Same: Distinct Structures of Solution Aggregates Drastically Modulate Assembly Pathways, Morphology, and Electronic Properties of Conjugated Polymers

Tuning structures of solution-state aggregation and aggregation-mediated assembly pathways of conjugated polymers is crucial for optimizing their solid-state morphology and charge-transport property. However, it remains challenging to unravel and control the exact structures of solution aggregates, let alone to modulate assembly pathways in a controlled fashion. Herein, aggregate structures of an isoindigo-bithiophene-based polymer (PII-2T) are modulated by tuning selectivity of the solvent toward the side chain versus the backbone, which leads to three distinct assembly pathways: direct crystallization from side-chain-associated amorphous aggregates, chiral liquid crystal (LC)-mediated assembly from semicrystalline aggregates with side-chain and backbone stacking, and random agglomeration from backbone-stacked semicrystalline aggregates. Importantly, it is demonstrated that the amorphous solution aggregates, compared with semicrystalline ones, lead to significantly improved alignment and reduced paracrystalline disorder in the solid state due to direct crystallization during the meniscus-guided coating process. Alignment quantified by the dichroic ratio is enhanced by up to 14-fold, and the charge-carrier mobility increases by a maximum of 20-fold in films printed from amorphous aggregates compared to those from semicrystalline aggregates. This work shows that by tuning the precise structure of solution aggregates, the assembly pathways and the resulting thin-film morphology and device properties can be drastically tuned.

Optimizing the Intercrystallite Connection of Donor-Acceptor Conjugated Semiconductor Polymer by Controlling the Crystallization Rate via Temperature

The charge carrier transport of conjugated polymer thin film is mainly decided by the crystalline domain and intercrystallite connection. High density tie-chain can provide an effective bridge between crystalline domains. Herein, the tie-chain connection behavior is optimized by decreasing the crystal region length (l_c ) and increasing the crystallization rate. Poly[4-(4,4-bis(2-octyldodecyl)-4H-cyclopenta[1,2-b:5,4-b']dithiophen-2-yl)-alt-[1,2,5]-thiadiazolo[3,4-c]pyridine] (PCDTPT-ODD) is dissolved in nonpolar solvent isooctane and high ordered rod-like aggregations are formed. As the temperature increases, the changes of solution state and crystallization behavior lead to three different chain arrangement morphologies in the films: (1) at 25°C, large and separated crystal regions are formed; (2) at 55°C, small and well-connected crystal regions are formed due to faster crystallization rate and smaller nucleus size; (3) at 90°C, the amorphous film is formed. Further results show that the film prepared at 55°C has a smaller crystal region length (l_c , 7.6 nm) and higher tie-chains content. Thus, the film exhibits the best device mobility of 2.3 × 10^-3 cm² V^-1 s^-1 . This result shows the great influence of crystallization kinetics on the microstructure of conjugated polymer films and provides an effective way for the optimization of the intercrystallite tie-chain. This article is protected by copyright. All rights reserved.

Unraveling the Molar Mass Dependence of Shearing-Induced Aggregation Structure of a High-Mobility Polymer Semiconductor

Aggregation-structure formation of conjugated polymers is a fundamental problem in the field of organic electronics and remains poorly understood. Herein, the molar mass dependence of the aggregation structure of a high-mobility conjugated copolymer (TDPP-Se) comprising thiophene-flanked diketopyrrolopyrrole and selenophene is thoroughly shown. Five batches of TDPP-Se are prepared with the number-average molecular weights (M_n ) varied greatly from 21 to 135 kg mol^-1 . Small-angle neutron scattering and transmission electron microscopy are combined to probe the solution structure of these polymers, consistently using a deuterated solvent. All the polymers adopt 1D rod-like aggregation structures and the radius of the 1D rods is not sensitive to the M_n , while the length increases monotonically with M_n . By utilizing the ordered packing of the aggregated structure in solution, a highly aligned and ordered film is prepared and, thereafter, a reliable hole mobility of 13.8 cm² V^-1 s^-1 is realized in organic thin-film transistors with the moderate M_n batch via bar coating. The hole mobility is among the highest values reported for diketopyrrolopyrrole-based polymers. This work paves the way to visualize the real aggregated structure of polymer semiconductors in solution and sheds light on the microstructure control of high-performance electronic devices.