Anionic Polymerization of Vinylcatechol Derivatives: Reversal of the Monomer Gradient Directed by the Position of the Catechol Moiety in the Copolymerization with Styrene

Stability Increase of Phenolic Acid Decarboxylase by a Combination of Protein and Solvent Engineering Unlocks Applications at Elevated Temperatures

Enzymatic decarboxylation of biobased hydroxycinnamic acids gives access to phenolic styrenes for adhesive production. Phenolic acid decarboxylases are proficient enzymes that have been applied in aqueous systems, organic solvents, biphasic systems, and deep eutectic solvents, which makes stability a key feature. Stabilization of the enzyme would increase the total turnover number and thus reduce the energy consumption and waste accumulation associated with biocatalyst production. In this study, we used ancestral sequence reconstruction to generate thermostable decarboxylases. Investigation of a set of 16 ancestors resulted in the identification of a variant with an unfolding temperature of 78.1 °C and a half-life time of 45 h at 60 °C. Crystal structures were determined for three selected ancestors. Structural attributes were calculated to fit different regression models for predicting the thermal stability of variants that have not yet been experimentally explored. The models rely on hydrophobic clusters, salt bridges, hydrogen bonds, and surface properties and can identify more stable proteins out of a pool of candidates. Further stabilization was achieved by the application of mixtures of natural deep eutectic solvents and buffers. Our approach is a straightforward option for enhancing the industrial application of the decarboxylation process.

Facile Bond Exchanging Strategy for Engineering Wet Adhesion and Antioxidant/Antibacterial Thin Layer over a Dynamic Hydrogel via the Carbon Dots Derived from Tannic Acid/ε-Polylysine

Adhesive hydrogels, playing an essential role in stretchable electronics, soft robotics, tissue engineering, and so forth, upon functioning often need to adhere to various substrates in wet conditions and simultaneously exhibit antibacterial/antioxidant properties while possessing the intrinsic stretchability and elasticity of the hydrogel network intact. Therefore, simple approaches to conveniently access adhesive hydrogels with multifunctional surfaces are being pursued. Herein, a facile strategy has been proposed to construct multifunctional adhesive hydrogels via surface engineering of a multifunctional carbon dot (CD)-decorated polymeric thin layer by dynamic bond exchange. By this strategy, a double cross-linked network hydrogel of polyacrylamide (PAM) and oxidized dextran (ODA) was engineered with a unique dense layer over the Schiff base hydrogel matrix by aqueous solution immersion of PA-120, versatile CDs derived from tannic acid (TA) and ε-polylysine (PL). Without any additional agents, the PA-120 CDs with residual polyphenolic/catechol and amine moieties were incorporated into the surface structure of the hydrogel network by the combined action of the Schiff base and hydrogen bonds to form a dense surface layer that can exhibit high wet adhesive performance via the amine-polyphenol/catechol pair. The armor-like dense architecture also endowed hydrogels with considerably enhanced tensile/compression properties and excellent antioxidant/antibacterial abilities. Besides, the single-sided modified Janus hydrogel and completely surface-modified hydrogel can be flexibly developed through this approach. This strategy will provide new insights into the preparation and application of surface-modified hydrogels featuring multiple functions and tunable interfacial properties.

Nickel-Catalyzed Alkene Difunctionalization as a Method for Polymerization

Alkene dicarbofunctionalization is a rapidly emerging tool for complex molecule synthesis that installs two carbon fragments regioselectively across an alkene. This method has the potential to engineer stereodefined polymers, yet the application of difunctionalization reactions to polymer synthesis remains unexplored. Herein, we describe the first example of a Ni-catalyzed difunctionalization of alkenes with arylboronic esters and aryl bromides innate to the alkene. The polymerization reaction proceeds regioselectively with the addition of the aryl bromide to the terminal alkenyl carbon and arylboronic ester to the internal benzylic carbon. The resultant poly[arylene-α-(aryl)ethylene]s comprise aryl groups installed at regular intervals along the polymer backbone through chain propagation in two directions. Polymers with molecular weights generally ranging from 30 to 175 kDa were obtained after successful fractionation from oligomeric species. Thermal analysis of the poly[arylene α-(aryl)ethylene]s revealed stability up to ∼399 °C, with a Tg of 90 °C, both of which are similar in value to poly(styrene)s and poly(phenylene methylene)s.

Plasmonic Sensing Assay for Long-Term Monitoring (PSALM) of Neurotransmitters in Urine

A liquid-based surface-enhanced Raman spectroscopy assay termed PSALM is developed for the selective sensing of neurotransmitters (NTs) with a limit of detection below the physiological range of NT concentrations in urine. This assay is formed by quick and simple nanoparticle (NP) "mix-and-measure" protocols, in which Fe^III bridges NTs and gold NPs inside the sensing hotspots. Detection limits of NTs from PreNP PSALM are significantly lower than those of PostNP PSALM, when urine is pretreated by affinity separation. Optimized PSALM enables the long-term monitoring of NT variation in urine in conventional settings for the first time, allowing the development of NTs as predictive or correlative biomarkers for clinical diagnosis.

Poly(2-oxazoline)s Based on Phenolic Acids

A series of phenolic-acid-based 2-oxazoline monomers with methoxy-substituted phenyl and cinnamyl side chains is synthesized and polymerized in a microwave reactor at 140 °C using methyl tosylate as the initiator. The obtained poly(2-oxazoline)s are characterized by NMR spectroscopy, MALDI-TOF mass spectrometry, and size-exclusion chromatography (SEC). Kinetic studies reveal that the microwave-assisted polymerization is fast and completed within less than ≈10 min for low monomer-to-initiator ratios of ≤25. Polymers with number-average molar masses of up to 6500 g mol^-1 and low dispersity (1.2-1.3) are produced. The aryl methyl ethers are successfully cleaved with aluminum triiodide/N,N'-diisopropylcarbodiimide to give a poly(2-oxazoline) with pendent catechol groups.

Dual-Mode Cross-Linking Enhances Adhesion of Silk Fibroin Hydrogels to Intestinal Tissue

Compared to conventional wound closure methods like sutures and staples, polymer-based tissue adhesives afford some distinct advantages, such as greater ease of deployment in spatially constrained surgical sites. One way to achieve aqueous adhesion is by introducing catechol functional groups that form coordinate and covalent bonds with a variety of substrates. This approach, inspired by marine organisms, has been applied to biopolymers and synthetic polymers, but one key challenge is that compositions that are soluble in water are often susceptible to high swelling ratios that can result in undesired compression of neighboring tissues. This work sought to synthesize aqueous adhesive gels that are capable of two modes of association: (1) adhesion and covalent cross-linking reactions arising from catechol oxidation and (2) noncovalent cross-linking arising from self-assembly of polymer backbones within the gelled adhesive. The network's self-assembly after gelation was envisioned to afford control over swelling and reinforce its strength. Bombyx mori silk fibroin was selected as the backbone of the adhesive network because it can be processed into an aqueous solution yet later be rendered insoluble in water through the assembly of its hydrophobic protein core. Distinct from a previous approach to functionalize silk directly with catechol groups, this work investigated in situ generation of catechol on silk fibroin by enzymatically modifying phenolic side chains, where it was found that this enzymatic approach led to conjugates with higher degrees of catechol functionalization and aqueous solubility. Silk fibroin was functionalized with tyramine to enrich the protein's phenolic side chains, which were subsequently oxidized into catechol groups using mushroom tyrosinase (MT). The gelation of the silk conjugates with MT was monitored by rheology, and the gels exhibited low water uptake. Phenolic enrichment increased the rate of chemical cross-linking leading to gelation but did not interrupt assembly of silk's secondary structures. Adhesion of the tyramine-silk conjugates to porcine intestine was found to be superior to fibrin sealant, and induction of β sheet secondary structures was found to further enhance adhesive strength through a second mode of cross-linking. Neither the chemical functionalization nor phenol oxidation affected the ability of intestinal epithelial cells (Caco-2) to attach and proliferate. Phenolic functionalization and oxidative cross-linking of silk fibroin was found to afford a new route to water-soluble, catechol-functionalized polymers, which were found to display excellent adhesion to mucosal tissue and whose secondary structure provides an additional mode to control strength and swelling of adhesive gels.

Adhesion Control of Branched Catecholic Polymers by Acid Stimulation

Biomimetic material design is a useful method for producing new functional materials. In recent years, catecholic polymers inspired from the adhesion mechanism of marine organisms have attracted attention. Here, we demonstrated the preparation of catecholic polymers by reversible addition-fragmentation chain transfer (RAFT) polymerization of an acetonide-protected catecholic monomer, that is, N-(2-(2,2-dimethylbenzo-1,3-dioxol-5-yl)ethyl)-acrylamide (DDEA). By selecting the specific RAFT reagents, well-defined branched PDDEA and linear PDDEA were obtained. These PDDEA samples showed stronger adhesion strength after deprotection by acid stimulation compared with that before deprotection. In addition, we demonstrated the adhesion control of synthetic polymers by photoirradiation in the presence of photoacid generators, which decompose under light and release an acid.

Bioinspired Block Copolymer for Mineralized Nanoporous Membrane

Homoporous membranes fabricated by self-assembled block copolymers (BCPs) have gained growing attention for their easy availability of well-ordered nanostructures for precise separation. However, it remains a challenges to improve the mechanical integrity, hydrophilic properties, and pore functionalities of the existing systems. To this end, we report an organic-mineral composite hybrid nanoporous BCP membrane with attractive superhydrophilicity, mechanical stability, and fouling-resistance derived from a bioinspired block copolymer, poly(propylene carbonate)- block-poly(4-vinylcatechol acetonide) (PPC- b-PVCA). The key advances include the following. (1) The PPC minor block is qualified as sacrificial domain because of its alkali sensitivity for generating monodisperse nanopores. (2) The PVCA matrix block contains the catechol groups, which enables the formation of inorganic layer  via a biomineralization process, thus producing an organic-mineral composite nanoporous BCP membrane with attractive superhydrophilicity, mechanical stability, and fouling resistance. A ∼200 nm thickness BCP film with monodisperse through-pores of 12 nm diameter cylinders oriented perpendicularly to a supporting microfiltration membrane is fabricated by sequential blade-casting, solvent annealing, hydrolysis sacrificial block, and biomineralization process. The mechanical stability, high water flow (114 L m^-2 h^-1 bar^-1), size fractionation of nanoparticles, as well as protein antiadsorption performance make the strategy provided here hold the promise of affording an advance platform for filtration, catalysis, and drug delivery.

Core-shell cylinder (CSC) nanotemplates comprising mussel-inspired catechol-containing triblock copolymers for silver nanoparticle arrays and ion conductive channels

Catechol moieties, which are found in mussel-adhesive proteins, allow the interaction of various kinds of materials that results in substantial adhesion to a wide variety of materials and in the reduction of metal ions to solid metals. Various types of catechol-containing polymers mimicking adhesion and reduction properties have been reported, however, due to its reactivity to a wide variety of functional groups, only a few reports about the formation of block and sequence controlled copolymers containing catechol groups. This is the first report about the synthesis of triblock copolymers containing catechol groups by reversible-addition fragmentation transfer (RAFT) polymerization. The synthesized triblock copolymer forms a core-shell cylinder (CSC) phase-separated structure, in which PVCa domains located the surface of cylinders, and it works as a template for silver nanoparticle arrays and a proton conductive channel. Since triblock copolymer has broader latitude to form phase-separated structures, the triblock copolymer containing catechol groups can be suitable for templates of inorganic nanoparticle arrays.

Synthesis of a sequence-controlled in-chain alkynyl/tertiary amino dual-functionalized terpolymer via living anionic polymerization

A dual-functionalized sequence-defined terpolymer was synthesized via living anionic polymerization; meanwhile its kinetic characteristics and sequence structure were investigated in detail via the in situ¹H NMR method.

A family of linear phenolic polymers with controlled hydrophobicity, adsorption and antioxidant properties

The synthesis of a series of antioxidant polymers with varied capability to scavenge radicals and alter the wettability of surfaces is reported.

Recent approaches in designing bioadhesive materials inspired by mussel adhesive protein

Marine mussels secret protein-based adhesives, which enable them to anchor to various surfaces in a saline, intertidal zone. Mussel foot proteins (Mfps) contain a large abundance of a unique, catecholic amino acid, Dopa, in their protein sequences. Catechol offers robust and durable adhesion to various substrate surfaces and contributes to the curing of the adhesive plaques. In this article, we review the unique features and the key functionalities of Mfps, catechol chemistry, and strategies for preparing catechol-functionalized polymers. Specifically, we reviewed recent findings on the contributions of various features of Mfps on interfacial binding, which include coacervate formation, surface drying properties, control of the oxidation state of catechol, among other features. We also summarized recent developments in designing advanced biomimetic materials including coacervate-forming adhesives, mechanically improved nano- and micro-composite adhesive hydrogels, as well as smart and self-healing materials. Finally, we review the applications of catechol-functionalized materials for the use as biomedical adhesives, therapeutic applications, and antifouling coatings. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017, 55, 9-33.

Formation of unusual microphase-separated ultrathin films of poly(vinyl catechol-block-styrene) (PVCa-b-PSt) at the air–water interface by solution casting onto water

Formation of ultrathin films of poly(vinyl catechol-block-styrene) (PVCa-b-PSt) at the air–water interface was accomplished by mixing a THF solution with the water phase followed by solvent evaporation.

Conventional Oxyanionic versus Monomer-Activated Anionic Copolymerization of Ethylene Oxide with Glycidyl Ethers: Striking Differences in Reactivity Ratios

Detailed understanding of the monomer distribution in copolymers is essential to tailor their properties. For the first time, we have been able to utilize in situ ¹H NMR spectroscopy to monitor the monomer-activated anionic ring opening copolymerization (AROP) of ethylene oxide (EO) with a glycidyl ether comonomer, namely, ethoxy ethyl glycidyl ether (EEGE). We determine reactivity ratios and draw a direct comparison to conventional oxyanionic ROP. Surprisingly, the respective monomer reactivities differ strongly between the different types of AROP. Under conventional oxyanionic conditions similar monomer reactivities of EO and EEGE are observed, leading to random structures (r_EO = 1.05 ± 0.02, r_EEGE = 0.94 ± 0.02). Addition of a cation complexing agent (18-crown-6) showed no influence on the relative reactivity of EO and EEGE (r_EO = r_EEGE = 1.00 ± 0.02). In striking contrast, monomer-activated AROP produces very different monomer reactivities, affording strongly tapered copolymer structures (r_EO = 8.00 ± 0.16, r_EEGE = 0.125 ± 0.003). These results highlight the importance of understanding reactivity ratios of comonomer pairs under certain polymerization conditions, at the same time demonstrating the ability to generate both random and strongly tapered P(EO-co-EEGE) polyethers by simple one-pot statistical anionic copolymerization. These observations may be generally valid for the copolymerization of EO and glycidyl ethers.