SPECT/CT Imaging of Pluronic Nanocarriers with Varying Poly(ethylene oxide) Block Length and Aggregation State

Design and development of nanoprobes radiolabelled with 99mTc for the diagnosis and monitoring of therapeutic interventions in oncology preclinical research

BACKGROUND

Previous studies employing polymeric micelles and molecular imaging for in vivo nanosystem characterization have led to the development of radionanoprobes (RNPs) designed for diagnosing and monitoring therapeutic interventions in preclinical oncology research, specifically within breast and colon cancer models. These models exhibit high GLUT1 expression on tumor cells and VEGFR expression on the tumor vasculature. We aimed to enhance the tumor-targeting specificity of these RNPs by functionalizing micelles with glucose and bevacizumab. The choice of 99mTc to label the nanoprobes is based on its availability and that direct labeling method is a widespread strategy to prepare radiopharmaceuticals using cold reagents and a 99Mo/99mTc generator. Soluplus® is an attractive polymer for synthesizing micelles that also allows their functionalization. With all the above, the objective of this work was to design, develop and characterize nanoprobes based on polymeric micelles and radiolabeled with 99mTc for the characterization of biological processes associated to the diagnosis, prognosis and monitoring of animal models of breast and colon cancer in preclinical research using molecular images.

RESULTS

Four RNPs ([99mTc]Tc-Soluplus®, [99mTc]Tc-Soluplus®+TPGS, [99mTc]Tc-Soluplus®+glucose and [99mTc]Tc-Soluplus®+bevacizumab) were produced with high radiochemical purity (> 95% in all cases) and stability in murine serum for up to 3 h. The RNPs maintained the 100 nm size of the Soluplus® polymeric micelles even when they were functionalized and labeled with 99mTc. The image acquisition protocol enabled the visualization of tumor uptake in two cancer experimental models using the assigned RNPs. In vivo biological characterization showed signal-to-background ratios of 1.7 ± 0.03 for [99mTc]Tc-Soluplus®+TPGS, 1.8 ± 0.02 for [99mTc]Tc-Soluplus®, and 2.3 ± 0.02 for [99mTc]Tc-Soluplus®+glucose in the breast cancer model, and 1.8 ± 0.04 for [99mTc]Tc-Soluplus® and 3.7 ± 0.07 for [99mTc]Tc-Soluplus®+bevacizumab in the colon cancer model. Ex vivo biodistribution, showed that the uptake of the tumors, regardless of the model, is < 2% IA/g while the blood activity concentration is higher, suggesting that the enhanced permeability and retention effect (EPR) would be one of the mechanisms involved in imaging tumors in addition to the active targeting of RNPs.

CONCLUSIONS

Soluplus®-based polymeric micelles provide a promising nanotechnological platform for the development of RNPs. The functionalization with glucose and bevacizumab enhances tumor specificity enabling effective imaging and monitoring of cancer in animal models.

Synthesis and Optimization of Next-Generation Low-Molecular-Weight Pentablock Copolymer Nanoadjuvants

Polymeric nanomaterials such as Pluronic®-based pentablock copolymers offer important advantages over traditional vaccine adjuvants and have been increasingly investigated in an effort to develop more efficacious vaccines. Previous work with Pluronic® F127-based pentablock copolymers, functionalized with poly(diethyl aminoethyl methacrylate) (PDEAEM) blocks, demonstrated adjuvant capabilities through the antigen presentation and crosslinking of B cell receptors. In this work, we describe the synthesis and optimization of a new family of low-molecular-weight Pluronic®-based pentablock copolymer nanoadjuvants with high biocompatibility and improved adjuvanticity at low doses. We synthesized low-molecular-weight Pluronic® P123-based pentablock copolymers with PDEAEM blocks and investigated the relationship between polymer concentration, micellar size, and zeta potential, and measured the release kinetics of a model antigen, ovalbumin, from these nanomaterials. The Pluronic® P123-based pentablock copolymer nanoadjuvants showed higher biocompatibility than the first-generation Pluronic® F127-based pentablock copolymer nanoadjuvants. We assessed the adjuvant capabilities of the ovalbumin-containing Pluronic® P123-based pentablock copolymer-based nanovaccines in mice, and showed that animals immunized with these nanovaccines elicited high antibody titers, even when used at significantly reduced doses compared to Pluronic® F127-based pentablock copolymers. Collectively, these studies demonstrate the synthesis, self-assembly, biocompatibility, and adjuvant properties of a new family of low-molecular-weight Pluronic® P123-based pentablock copolymer nanomaterials, with the added benefits of more efficient renal clearance, high biocompatibility, and enhanced adjuvanticity at low polymer concentrations.

Recent advances of Pluronic-based copolymers functionalization in biomedical applications

The design of polymeric biocompatible nanomaterials for biological and medical applications has received special attention in recent years. Among different polymers, the triblock type copolymers (EO)_x(PO)_y(EO)_x or Pluronics® stand out due its favorable characteristics such as biocompatibility, low tissue adhesion, thermosensitivity, and structural capacity to produce different types of macro and nanostructures, e.g. micelles, vesicles, nanocapsules, nanospheres, and hydrogels. However, Pluronic itself is not the "magic bullet" and its functionalization via chemical synthesis following biologically oriented design rules is usually required aiming to improve its properties. Therefore, this paper presents some of the main publications on new methodologies for synthetic modifications and applications of Pluronic-based nanoconstructs in the biomedical field in the last 15 years. In general, the polymer modifications aim to improve physical-chemical properties related to the micellization process or physical entrapment of drug cargo, responsive stimuli, active targeting, thermosensitivity, gelling ability, and hydrogel formation. Among these applications, it can be highlighted the treatment of malignant neoplasms, infectious diseases, wound healing, cellular regeneration, and tissue engineering. Functionalized Pluronic has also been used for various purposes, including medical diagnosis, medical imaging, and even miniaturization, such as the creation of lab-on-a-chip devices. In this context, this review discusses the main scientific contributions to the designing, optimization, and improvement of covalently functionalized Pluronics aiming at new strategies focused on the multiple areas of the biomedical field.

Novel Non-Viral Vectors Based on Pluronic® F68PEI with Application in Oncology Field

Copolymers composed of low-molecular-weight polyethylenimine (PEI) and amphiphilic Pluronics® are safe and efficient non-viral vectors for pDNA transfection. A variety of Pluronic® properties provides a base for tailoring transfection efficacy in combination with the unique biological activity of this polymer group. In this study, we describe the preparation of new copolymers based on hydrophilic Pluronic® F68 and PEI (F68PEI). F68PEI polyplexes obtained by doping with free F68 (1:2 and 1:5 w/w) allowed for fine-tuning of physicochemical properties and transfection activity, demonstrating improved in vitro transfection of the human bone osteosarcoma epithelial (U2OS) and oral squamous cell carcinoma (SCC-9) cells when compared to the parent formulation, F68PEI. Although all tested systems condensed pDNA at varying polymer/DNA charge ratios (N/P, 5/1−100/1), the addition of free F68 (1:5 w/w) resulted in the formation of smaller polyplexes (<200 nm). Analysis of polyplex properties by transmission electron microscopy and dynamic light scattering revealed varied polyplex morphology. Transfection potential was also found to be cell-dependent and significantly higher in SCC-9 cells compared to the control bPEI25k cells, as especially evident at higher N/P ratios (>25). The observed selectivity towards transfection of SSC-9 cells might represent a base for further optimization of a cell-specific transfection vehicle.

The in vivo fate of polymeric micelles

This review aims to provide a systemic analysis of the in vivo, as well as subcellular, fate of polymeric micelles (PMs), starting from the entry of PMs into the body. Few PMs are able to cross the biological barriers intact and reach the circulation. In the blood, PMs demonstrate fairly good stability mainly owing to formation of protein corona despite controversial results reported by different groups. Although the exterior hydrophilic shells render PMs "long-circulating", the biodistribution of PMs into the mononuclear phagocyte systems (MPS) is dominant as compared with non-MPS organs and tissues. Evidence emerges to support that the copolymer poly(ethylene glycol)-poly(lactic acid) (PEG-PLA) is first broken down into pieces of PEG and PLA and then remnants to be eliminated from the body finally. At the cellular level, PMs tend to be internalized via endocytosis due to their particulate nature and disassembled and degraded within the cell. Recent findings on the effect of particle size, surface characteristics and shape are also reviewed. It is envisaged that unraveling the in vivo and subcellular fate sheds light on the performing mechanisms and gears up the clinical translation of PMs.

Radiolabelling of nanomaterials for medical imaging and therapy

Nanomaterials offer unique physical, chemical and biological properties of interest for medical imaging and therapy. Over the last two decades, there has been an increasing effort to translate nanomaterial-based medicinal products (so-called nanomedicines) into clinical practice and, although multiple nanoparticle-based formulations are clinically available, there is still a disparity between the number of pre-clinical products and those that reach clinical approval. To facilitate the efficient clinical translation of nanomedicinal-drugs, it is important to study their whole-body biodistribution and pharmacokinetics from the early stages of their development. Integrating this knowledge with that of their therapeutic profile and/or toxicity should provide a powerful combination to efficiently inform nanomedicine trials and allow early selection of the most promising candidates. In this context, radiolabelling nanomaterials allows whole-body and non-invasive in vivo tracking by the sensitive clinical imaging techniques positron emission tomography (PET), and single photon emission computed tomography (SPECT). Furthermore, certain radionuclides with specific nuclear emissions can elicit therapeutic effects by themselves, leading to radionuclide-based therapy. To ensure robust information during the development of nanomaterials for PET/SPECT imaging and/or radionuclide therapy, selection of the most appropriate radiolabelling method and knowledge of its limitations are critical. Different radiolabelling strategies are available depending on the type of material, the radionuclide and/or the final application. In this review we describe the different radiolabelling strategies currently available, with a critical vision over their advantages and disadvantages. The final aim is to review the most relevant and up-to-date knowledge available in this field, and support the efficient clinical translation of future nanomedicinal products for in vivo imaging and/or therapy.

The Application of the in-Situ Hyperthermia Emission from Acoustic Nanodroplets for Theranostic Dual-Imaging and Antitumor Modalities

In this study, we have developed a theranostic nanocarrier that can emit heat upon the exposure to ultrasound (US) irradiation as well as the generation of a contrast signal that can be detected with ultrasonography. The prepared acoustic nanodroplets (NDs) made with liquid perfluporopentane (PFPn) had an average size of 197.7 ± 3.6 nm in diameter and were stable in vitro for 60 min. US irradiation at 2 W.cm^-2 induced phase change of NDs into bubbles in vitro. On the other hand, the intra-tumor injection of NDs in combination with US irradiation induced thermal emission in situ in B16BL6 melanoma tumor implanted into mice and the emission areas have mostly covered the tumor site. Also, the combination between NDs and US irradiation has inhibited the tumor growth. Under this condition, the heat shock protein (HSP70) in tumor was significantly upregulated after 6 h of the treatment of NDs with US. Thus, we have developed a therapeutic system with multiple theranostic modalities composed of acoustic NDs and US irradiation applicable to the tumor treatment on the external surface of the body.

Current outlook on radionuclide delivery systems: from design consideration to translation into clinics

Radiopharmaceuticals have proven to be effective agents, since they can be successfully applied for both diagnostics and therapy. Effective application of relevant radionuclides in pre-clinical and clinical studies depends on the choice of a sufficient delivery platform. Herein, we provide a comprehensive review on the most relevant aspects in radionuclide delivery using the most employed carrier systems, including, (i) monoclonal antibodies and their fragments, (ii) organic and (iii) inorganic nanoparticles, and (iv) microspheres. This review offers an extensive analysis of radionuclide delivery systems, the approaches of their modification and radiolabeling strategies with the further prospects of their implementation in multimodal imaging and disease curing. Finally, the comparative outlook on the carriers and radionuclide choice, as well as on the targeting efficiency of the developed systems is discussed.

Pluronic block copolymers enhance the anti-myeloma activity of proteasome inhibitors

Proteasome inhibitors (PIs) have markedly improved response rates as well as the survival of multiple myeloma (MM) patients over the past decade and have become an important foundation in the treatment of MM patients. Unfortunately, the majority of patients either relapses or becomes refractory to proteasome inhibition. This report describes that both PI sensitive and resistant MM cells display enhanced sensitivity to PI in the presence of synthetic amphiphilic block copolymers, Pluronics (SP1017). SP1017 effectively overcomes both acquired resistance and tumor microenvironment-mediated resistance to PIs. The combination of bortezomib and SP1017 augments accumulation of ubiquitinated proteins, increases markers of proteotoxic and ER stress, and ultimately induces both the intrinsic and extrinsic drug-induced apoptotic pathways in MM cells. Notably, co-treatment of bortezomib and SP1017 intensifies SP1017-induced disorganization of the Golgi complex and significantly reduces secretion of paraproteins. Using a human MM/SCID mice model, the combination of bortezomib and SP1017 exerted enhanced antitumor efficacy as compared to bortezomib alone, delaying disease progression, but without additional toxicity. Collectively, these findings provide proof of concept for the utility of combining PI with SP1017 and present a new approach to enhance the efficacy of current treatment options for MM patients.

Intravenous and intratumoral injection of Pluronic P94: The effect of administration route on biodistribution and tumor retention

Pluronics P94 are block-copolymer showing prolonged circulation time and tumor-cell internalization in vitro, suggesting a potential for tumor accumulation and as a drug carrier. Here we report the results of the radiolabeled-P94 unimers (P94-¹¹¹In-DTPA) on tumor uptake/retention and biodistribution after intravenous and intratumoral injection to tumor-bearing mice. Intravenous administration results in a high radioactive signal in the liver; while in tumor and other healthy tissues only low levels of radioactivity could be measured. In contrast, the intratumoral injection of P94 resulted in elevated levels of radioactivity in the tumor and low levels in other organs, including the liver. Independently from the injection route, the tumor tissue presented long retention of radioactivity. The minimal involvement of off-target tissues of P94, together with the excellent tracer retention over-time in the tumor designates Pluronic P94 copolymer as a highly promising carrier for anti-tumor drugs.

Polymeric mixed micelles as nanomedicines: Achievements and perspectives

During the past few decades, polymeric micelles have raised special attention as novel nano-sized drug delivery systems for optimizing the treatment and diagnosis of numerous diseases. These nanocarriers exhibit several in vitro and in vivo advantages as well as increased stability and solubility to hydrophobic drugs. An interesting approach for optimizing these properties and overcoming some of their disadvantages is the combination of two or more polymers in order to assemble polymeric mixed micelles. This review article gives an overview on the current state of the art of several mixed micellar formulations as nanocarriers for drugs and imaging probes, evaluating their ongoing status (preclinical or clinical stage), with special emphasis on type of copolymers, physicochemical properties, in vivo progress achieved so far and toxicity profiles. Besides, the present article presents relevant research outcomes about polymeric mixed micelles as better drug delivery systems, when compared to polymeric pristine micelles. The reported data clearly illustrates the promise of these nanovehicles reaching clinical stages in the near future.

Cancer-Cell-Biomimetic Nanoparticles for Targeted Therapy of Homotypic Tumors

A unique biomimetic drug-delivery system composed of 4T1-breast-cancer-cell membranes and paclitaxel-loaded polymeric nanoparticles (PPNs) (cell-membrane-coated PPNs), demonstrates superior interactions to its source tumor cells and elongated blood circulation, and displays highly cell-specific targeting of the homotypic primary tumor and metastases, with successful inhibition of the growth and lung metastasis of the breast cancer cells.

Multimodality imaging in nanomedicine and nanotheranostics

Accurate diagnosis of tumors needs much detailed information. However, available single imaging modality cannot provide complete or comprehensive data. Nanomedicine is the application of nanotechnology to medicine, and multimodality imaging based on nanoparticles has been receiving extensive attention. This new hybrid imaging technology could provide complementary information from different imaging modalities using only a single injection of contrast agent. In this review, we introduce recent developments in multifunctional nanoparticles and their biomedical applications to multimodal imaging and theragnosis as nanomedicine. Most of the reviewed studies are based on the intrinsic properties of nanoparticles and their application in clinical imaging technology. The imaging techniques include positron emission tomography, single-photon emission computed tomography, computerized tomography, magnetic resonance imaging, optical imaging, and ultrasound imaging.