High-Energy Ball Milling as Green Process To Vitrify Tadalafil and Improve Bioavailability

Comparative analysis of novel modified drug delivery systems for improving the oral bioavailability of water-insoluble tadalafil using copovidone, TPGS and hydroxypropyl-β-cyclodextrin

This study aims to develop novel modified drug delivery systems (MDDS) including solid dispersions, solid self-nanoemulsifying drug delivery system (S-SNEDDS) and inclusion compound (IC) of poorly water-soluble tadalafil using various biological macromolecules and compare their ability to improve solubility, dissolution and bioavailability. Ingredients of MDDS were extensively screened using SEM, DSC, and XRD. The MDDS were testified for improved solubilization, dissolution, and bioavailability and were compared with tadalafil powder and commercial product (Cialis tablets 20 mg). All MDDS demonstrated excellent physicochemical properties, improved solubility and dissolution of tadalafil. The sequence of highest solubilization and dissolution was found to be SE-solid dispersion, S-SNEDDS, SA-solid dispersion, and IC. SE-solid dispersion and IC showed spherical morphology and comparatively small particle size. In SA-solid dispersion, the hydrophilic carriers were found attached with the drug surface. Similarly, S-SNEDDS demonstrated the absorbance of L-SNEDDS inside the pores and surface of calcium silicate. All MDDS showed improved oral bioavailability (P < 0.05) in the order of SE-solid dispersion ≥ S-SNEDDS > SA-solid dispersion > commercial product > IC, when compared with tadalafil powder in rats. Thus, the SE-solid dispersion with highest solubility (660-folds) and oral bioavailability (10-folds) of tadalafil may be recommended as the most suitable candidate for the development of oral pharmaceutical products.

Mechanistic Investigation into the Phase Separation Behavior of Soluplus in the Presence of Biorelevant Media

More than a decade since its introduction, the polymeric excipient Soluplus continues to receive considerable attention for its application in the development of amorphous solid dispersions (ASDs) and its utility as a solubilizer for drugs exhibiting solubility limited absorption. While it is well-recognized that Soluplus forms micelles, the impact of its lower critical solution temperature of approximately 40 °C remains an underexplored aspect. This study investigated the phase behavior of Soluplus in fasted-state simulated intestinal fluid (FaSSIF-V1). It was demonstrated that Soluplus forms a dispersed polymer-rich coacervate phase, which coexists with Soluplus micelles at 37 °C. This behavior was confirmed by cloud point measurements, visually discernible phases after centrifugation, as well as multi-angle dynamic light scattering (MADLS) measurements, and quantitative 1H-nuclear magnetic resonance (NMR) spectroscopy of Soluplus concentrations in the supernatant pre- and post-centrifugation. The practical relevance of these findings was contextualized by solvent shift experiments and dissolution testing of spray-dried ASD. The results demonstrated that the poorly water-soluble drug RO6897779 resided in a polymer-rich coacervate phase and was spun down during centrifugation, which resulted in an amorphous pellet exhibiting the characteristics of a viscous liquid. The entrapment of the drug within the polymer-rich phase was further analyzed by temperature- and time-dependent MADLS experiments. The findings of this study are of particular relevance for a mechanistic understanding, relevant to comprehending in vitro-in vivo relationships of Soluplus-based ASDs. Low sampled drug concentrations in FaSSIF-V1 at 37 °C may originate not only from limited drug release and precipitation but also from the formation of a drug-containing, polymer-rich Soluplus phase. Therefore, a liquid-liquid phase separation occurring from Soluplus-based formulations in a biorelevant medium can be excipient-driven, which is different from the common perception that phase separation in the solution state is triggered primarily by high drug concentrations exceeding their amorphous solubility.

Co-Amorphous Solid Dispersion System for Improvement in Dissolution Profile of N-(((1r,4r)-4-((6-fluorobenzo[d]oxazol-2-yl)amino)cyclohexyl)methyl)-2-methylpropane-2-sulfonamide as a Neuropeptide Y5 Receptor Antagonist

Background/Objectives: Brick dust molecules exhibit high melting points and ultralow solubility. Overcoming this solubility issue is challenging. Previously, we formulated a co-amorphous system for a neuropeptide Y5 receptor antagonist (NP) as a brick dust drug using sodium taurocholate (ST) to improve its dissolution profile. In this study, we have designed a ternary amorphous system involving polymer addition to further improve a co-amorphous system. Methods: The amorphous samples were prepared by the ball milling. The thermal and spectroscopic analyses were performed, and the isothermal crystallization and dissolution profiles were evaluated. Results: The ball milling of NPs, ST, and each of the three types of polymers successfully converted crystalline NPs to amorphous NPs. Thermal analysis confirmed the formation of a single amorphous phase. The infrared spectra revealed a specific interaction between an NP and ST in the co-amorphous system. Moreover, the intermolecular interactions of NP-ST were maintained in the ternary amorphous systems, suggesting the miscible dispersion of the co-amorphous system into the polymer via weak interactions as co-amorphous solid dispersions. The dissolution profile of co-amorphous NP-ST was 4.1- and 6.7-fold higher than that of crystalline NPs in pH 1.2 and 6.8 buffers, respectively. The drug concentration in the ternary amorphous system in pH 1.2 and 6.8 buffers became 1.1-1.2- and 1.4-2.7-fold higher than that seen in the co-amorphous system, respectively. Conclusions: Co-amorphous solid dispersion is a promising method for enhancing the solubility of brick dust molecules.

Electrospun Amorphous Solid Dispersions with Lopinavir and Ritonavir for Improved Solubility and Dissolution Rate

Lopinavir (LPV) and ritonavir (RTV) are two of the essential antiretroviral active pharmaceutical ingredients (APIs) characterized by poor solubility. Hence, attempts have been made to improve both their solubility and dissolution rate. One of the most effective approaches used for this purpose is to prepare amorphous solid dispersions (ASDs). To our best knowledge, this is the first attempt aimed at developing ASDs via the electrospinning technique in the form of fibers containing LPV and RTV. In particular, the impact of the various polymeric carriers, i.e., Kollidon K30 (PVP), Kollidon VA64 (KVA), and Eudragit® E100 (E100), as well as the drug content as a result of the LPV and RTV amorphization were investigated. The characterization of the electrospun fibers included microscopic, DSC, and XRD analyses, the assessment of their wettability, and equilibrium solubility and dissolution studies. The application of the electrospinning process led to the full amorphization of both the APIs, regardless of the drug content and the type of polymer matrix used. The utilization of E100 as a polymeric carrier for LPV and KVA for RTV, despite the beads-on-string morphology, had a favorable impact on the equilibrium solubility and dissolution rate. The results showed that the electrospinning method can be successfully used to manufacture ASDs with poorly soluble APIs.

Timing and Mechanisms of Nanodiamond Uptake in Colon Cancer Cells

Introduction

As nanodiamonds become more and more widely used for intracellular labelling and measurements, the task of delivering these nanoparticles inside cells becomes more and more important. Certain cell types easily take up nanodiamonds, while others require special procedures.

Methods

In previous research, we found that HT-29 cells (a colon cancer cell line), which are notoriously difficult in the context of nanodiamond internalization, show increased uptake rates, when pre-treated with trypsin- ethylenediaminetetraacetic acid (trypsin-EDTA). However, the uptake mechanism has not been studied before. This article focuses on a more detailed investigation of the reasons underlying this phenomenon. We start by identifying the timing of fluorescent nanodiamond (FND) uptake in trypsin-EDTA pre-treated cells. We then use a combination of chemical inhibitors and Immunocytochemistry to identify the main pathways employed by HT-29 cells in the internalization process.

Results and Discussion

We investigate how these pathways are affected by the trypsin-EDTA pre-treatment and conclude by offering possible explanations for this phenomenon. We found that nanodiamonds are internalized via different pathways. Clathrin-mediated endocytosis proves to be the dominating mechanism. Trypsin-EDTA treatment increases particle uptake and affects the uptake mechanism.

Synthesis of the first remdesivir cocrystal: design, characterization, and therapeutic potential for pulmonary delivery

While cocrystal engineering is an emerging formulation strategy to overcome drug delivery challenges, its therapeutic potential in non-oral applications remains not thoroughly explored. We herein report for the first time the successful synthesis of a cocrystal for remdesivir (RDV), an antiviral drug with broad-spectrum activities against RNA viruses. The RDV cocrystal was prepared with salicylic acid (SA) via combined liquid-assisted grinding (LAG) and thermal annealing. Formation of RDV-SA was found to be a thermally activated process, where annealing at high temperature after grinding was a prerequisite to facilitate the cocrystal growth from an amorphous intermediate, rendering it elusive under ambient preparing conditions. Through powder X-ray analysis with Rietveld refinement, the three-dimensional molecular structure of RDV-SA was resolved. The thermally annealed RDV-SA produced by LAG crystalized in a non-centrosymmetric monoclinic space group P2₁ with a unit cell volume of 1826.53(17) ų, accommodating one pair of RDV and SA molecules in the asymmetric unit. The cocrystal formation was also characterized by differential scanning calorimetry, solid-state nuclear magnetic resonance, and Fourier-transform infrared spectroscopy. RDV-SA was further developed as inhaled dry powders by spray drying for potential COVID-19 therapy. The optimized RDV-SA dry powders exhibited a mass median aerodynamic diameter of 4.33 ± 0.2 μm and fine particle fraction of 41.39 ± 4.25 %, indicating the suitability for pulmonary delivery. Compared with the raw RDV, RDV-SA displayed a 15.43-fold higher fraction of release in simulated lung fluid at 120 min (p =0.0003). RDV-SA was safe in A549 cells without any in vitro cytotoxicity observed in the RDV concentration from 0.05 to 10 µM.

Green synthesized polyvinylpyrrolidone/titanium dioxide hydrogel nanocomposite modified with agarose macromolecules for sustained and pH-responsive release of anticancer drug

Cancer, as one of the most challenging diseases of the last century, has a significant number of patients and deaths every year. Various strategies have been explored for the treatment of cancer. Chemotherapy is one of the methods of treating cancer. Doxorubicin is one of the compounds used in chemotherapy to kill cancer cells. Due to their unique properties and low toxicity, metal oxide nanoparticles are effective in combination therapy and increase the effectiveness of anti-cancer compounds. The limited in vivo circulatory period, poor solubility, and inadequate penetration of doxorubicin (DOX) restrict its use in cancer treatment, notwithstanding its attractive characteristics. It is possible to circumvent some of the difficulties in cancer therapy by using green synthesized pH-responsive nanocomposite consisting of polyvinylpyrrolidone (PVP), titanium dioxide (TiO₂) modified with agarose (Ag) macromolecules. TiO₂ incorporation into the PVP-Ag nanocomposite resulted in limited increased loading and encapsulation efficiencies from 41 % to 47 % and 84 % to 88.5 %, respectively. DOX diffusion among normal cells is prevented by the PVP-Ag-TiO₂ nanocarrier at pH = 7.4, though the acidic intracellular microenvironments activate the PVP-Ag-TiO₂ nanocarrier at pH = 5.4. Characterization of the nanocarrier was performed using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectrophotometry, field emission scanning electron microscopy (FE-SEM), dynamic light scattering (DLS), and zeta potential. The average particle size and the zeta potential of the particles showed values of 349.8 nm and +57 mV, respectively. In vitro release after 96 h showed a release rate of 92 % at pH 7.4 and a release rate of 96 % at pH 5.4. Meanwhile, the initial release after 24 h was 42 % for pH 7.4 and 76 % for pH 5.4. As shown by an MTT analysis on MCF-7 cells, the toxicity of DOX-loaded PVP-Ag-TiO₂ nanocomposite was substantially greater than that of unbound DOX and PVP-Ag-TiO₂. After integrating TiO₂ nanomaterials into the PVP-Ag-DOX nanocarrier, flow cytometry data showed a greater stimulation of cell death. These data indicate that the DOX-loaded nanocomposite is a suitable alternative for drug delivery systems.

pH-Responsive PVA-Based Nanofibers Containing GO Modified with Ag Nanoparticles: Physico-Chemical Characterization, Wound Dressing, and Drug Delivery

Site-specific drug delivery and carrying repairing agents for wound healing purposes can be achieved using the intertwined three-dimensional structure of nanofibers. This study aimed to optimize and fabricate poly (vinyl alcohol) (PVA)-graphene oxide (GO)-silver (Ag) nanofibers containing curcumin (CUR) using the electrospinning method for potential wound healing applications. Fourier Transform Infrared (FTIR) spectrophotometry, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Dynamic Light Scattering (DLS), and zeta potential were used to characterize the nanostructures. The mechanical properties of the nanostructures were subsequently examined by tensile strength and elongation test. As shown by MIC analysis of E. coli and S. aureus bacteria, the fabricated nanofibers had superior inhibitory effects on the bacteria growth. Ag nanoparticles incorporation into the nanofibers resulted in increased loading and encapsulation efficiencies from 21% to 56% and from 61% to 86%, respectively. CUR release from PVA/GO-Ag-CUR nanofiber at pH 7.4 was prevented, while the acidic microenvironment (pH 5.4) increased the release of CUR from PVA/GO-Ag-CUR nanofiber, corroborating the pH-sensitivity of the nanofibers. Using the in vitro wound healing test on NIH 3T3 fibroblast cells, we observed accelerated growth and proliferation of cells cultured on PVA/GO-Ag-CUR nanofibers.

Data regarding particle size distribution, thermal properties and gaseous phase hydration of co-milled solid dispersions composed of tadalafil and Soluplus

A mechanical activation of the solid particles upon high-energy ball milling may considerably change the physicochemical properties of pharmaceutical compounds, including the morphology, particle size distribution, thermal properties, and surface interactions with water vapour upon gaseous phase hydration. Assessment of these changes is crucial for optimizing the manufacturing process of enabling drug products. In this article, we provide a detailed characterization of binary co-milled solid dispersions composed of tadalafil and Soluplus using a laser diffraction method, differential scanning calorimetry (DSC), gravimetric measurements and solid state ¹H- NMR spectroscopy. The data presented in this article is directly related to our previously published research article. They complement information on the impact that both formulation and process variables may have on the properties of these binary powder formulations.

A Mini Review on Surface-Enhanced Raman Scattering based Nanoclusters for Sensing and Imaging Applications

Background:

The invention of enhanced Raman scattering by adsorbing molecules on nanostructured metal surfaces is a milestone in the development of spectroscopic and analytical techniques. Important experimental and theoretical efforts were geared towards understanding the Surface Enhanced Raman Scattering effect (SERS) and evaluating its significance in a wide range of fields in different types of ultrasensitive sensing applications.

Methods:

Metal nanoclusters have been widely studied due to their unique structure and individual properties, which place them among single metal atoms and larger nanoparticles. In general, the nanoparticles with a size less than 2 nm is defined as nanoclusters (NCs) and they possess distinct optical properties. In addition, the excited electrons from absorption bands results in the emission of positive luminescence associated to the quantum size effect in which separate energy levels are produced.

Results:

It is demonstrated that fluorescent based SERS investigations of metal nanoparticles have showed more photostability, high compatibility, and good water solubility, has resulted in high sensitivity, better imaging and sensing experience in the biomedical applications.

Conclusion:

In the present review, we report recent trends in the synthesis of metal nanoclusters and their applications in biosensing and bio-imaging applications due some benefits including cost-effectiveness, easy synthesis routes and less consumption of sample volumes. Outcomes of this study confirms that SERS based fluorescent nanoclusters could be one of thrust research areas in biochemistry and biomedical engineering.

Colorectal cancer treatment using bacteria: focus on molecular mechanisms

BACKGROUND

Colorectal cancer which is related to genetic and environmental risk factors, is among the most prevalent life-threatening cancers. Although several pathogenic bacteria are associated with colorectal cancer etiology, some others are considered as highly selective therapeutic agents in colorectal cancer. Nowadays, researchers are concentrating on bacteriotherapy as a novel effective therapeutic method with fewer or no side effects to pay the way of cancer therapy. The introduction of advanced and successful strategies in bacterial colorectal cancer therapy could be useful to identify new promising treatment strategies for colorectal cancer patients.

MAIN TEXT

In this article, we scrutinized the beneficial effects of bacterial therapy in colorectal cancer amelioration focusing on different strategies to use a complete bacterial cell or bacterial-related biotherapeutics including toxins, bacteriocins, and other bacterial peptides and proteins. In addition, the utilization of bacteria as carriers for gene delivery or other known active ingredients in colorectal cancer therapy are reviewed and ultimately, the molecular mechanisms targeted by the bacterial treatment in the colorectal cancer tumors are detailed.

CONCLUSIONS

Application of the bacterial instrument in cancer treatment is on its way through becoming a promising method of colorectal cancer targeted therapy with numerous successful studies and may someday be a practical strategy for cancer treatment, particularly colorectal cancer.

Surfactant-free amorphous solid dispersion with high dissolution for bioavailability enhancement of hydrophobic drugs: a case of quercetin

At present, saccharides as hydrophilic matrixes, have been gradually used in amorphous solid dispersions (ASD) for dispersing poorly water-soluble drugs without surfactants. In this study, an amorphous chitosan oligosaccharide (COS) was applied as a water-soluble matrix to form surfactant-free ASD via the ball milling to vitrify quercetin (QUE) and enhance the dissolution and bioavailability. Solid-state characterization (DSC, XRPD, FTIR, SEM and PLM) and physical stability assessments verified that the prepared ASDs showed excellent physical stability with complete amorphization due to potential interactions between QUE and COS. In vitro sink dissolution tests suggested all QUE-COS ASDs (w:w, 1:1, 1:2 and 1:4) significantly enhanced the dissolution rate of QUE. Meanwhile, in vitro non-sink dissolution exhibited that the maximum supersaturated concentration ranged from 112.62 to 138.00 µg/mL for all QUE-COS ASDs, which was much higher than that of pure QUE. Besides, the supersaturation of QUE-COS ASD kept for at least 24 h. In rat pharmacokinetics, the oral bioavailability of QUE-COS ASDs showed 1.64 ∼ 2.25 times increase compared to the pure QUE (p < .01). Hence, the present study confirms the amorphous COS could be applied as a promising hydrophilic matrix in QUE-COS ASDs for enhancing dissolution performance and bioavailability of QUE.

Comparative chemical examination of inclusion complexes formed with β-cyclodextrin derivatives and basic amino acids

In this study, we have investigated the host-guest inclusion complexes between β-cyclodextrin (βCD), 2-hydroxypropyl-β-cyclodextrin (2-HPβCD), and mono-6-tosyl-β-cyclodextrin (TS-βCD) excipients and two amino acids, such as L-arginine (L-Arg) and L-lysine (L-Lys). The formation of inclusion complexes was detected, and a comparative study was conducted at different pH, density, and viscosity. A physical mixture, comprising equal amount of amino acids was used to prepare the complex in a solid-state form. The experimental parameters, such as apparent molar volume, limiting apparent molar volume, partial molar volume were analyzed by measuring density at infinite dilution. The other quantities, such as dynamic viscosity, kinematic viscosity, relative viscosity, intrinsic viscosity, spatial viscosity, activation energy were determined for amino acid/βCD complexes at various mass fractions of βCDs and different temperatures. Finally, we found moderate (R² > 0.5) and strong (R² > 0.7) linear relationships (p-value < 0.0001) between the dynamic viscosity and the temperature: the temperature evaluation promotes the decrease in dynamic viscosity for amnio acid-βCD (its derivatives) complexes. The results of this study emphasize important properties of analyzed complexes that can be utilized in the development of controlled drug delivery vectors.

Hybrid Nanosystems for Biomedical Applications

Inorganic/organic hybrid nanosystems have been increasingly developed for their versatility and efficacy at overcoming obstacles not readily surmounted by nonhybridized counterparts. Currently, hybrid nanosystems are implemented for gene therapy, drug delivery, and phototherapy in addition to tissue regeneration, vaccines, antibacterials, biomolecule detection, imaging probes, and theranostics. Though diverse, these nanosystems can be classified according to foundational inorganic/organic components, accessory moieties, and architecture of hybridization. Within this Review, we begin by providing a historical context for the development of biomedical hybrid nanosystems before describing the properties, synthesis, and characterization of their component building blocks. Afterward, we introduce the architectures of hybridization and highlight recent biomedical nanosystem developments by area of application, emphasizing hybrids of distinctive utility and innovation. Finally, we draw attention to ongoing clinical trials before recapping our discussion of hybrid nanosystems and providing a perspective on the future of the field.

Gold nanoparticles to enhance ophthalmic imaging

The use of gold nanoparticles as diagnostic tools is burgeoning, especially in the cancer community with a focus on theranostic applications to both cancer diagnosis and treatment. Gold nanoparticles have also demonstrated great potential for use in diagnostic and therapeutic approaches in ophthalmology. Although many ophthalmic imaging modalities are available, there is still a considerable unmet need, in particular for ophthalmic molecular imaging for the early detection of eye disease before morphological changes are more grossly visible. An understanding of how gold nanoparticles are leveraged in other fields could inform new ways they could be utilized in ophthalmology. In this paper, we review current ophthalmic imaging techniques and then identify optical coherence tomography (OCT) and photoacoustic imaging (PAI) as the most promising technologies amenable to the use of gold nanoparticles for molecular imaging. Within this context, the development of gold nanoparticles as OCT and PAI contrast agents are reviewed, with the most recent developments described in detail.

Study on a Three-Step Rapid Assembly of Zolpidem and Its Fluorinated Analogues Employing Microwave-Assisted Chemistry

We developed an efficient microwave-assisted three-step synthesis of zolpidem and its fluorinated analogues 1–3. The procedure relays on the utilization of easily accessible and inexpensive starting materials. Our protocol shows superior performance in terms of yield and purity of products, compared to conventional heating systems. Notably, the total time needed for reaction accomplishment is significantly lower comparing to oil bath heating systems. Finally, we have performed a detailed study on the preparation of zolpidem tartrate salt I, and we assessed its particle-sizes using a polarizing microscope. Our goal was to select the appropriate method that generates the acceptable particle-size, since the solid-size directly influences solubility in biological fluids and further bioavailability. We believe that the disclosed procedure will help to produce a lab-scale quantity of zolpidem and its fluorinated derivatives 1–3, as well as zolpidem tartrate salt I, with suitable fine-particle size for further biological experimentation.

Orodispersible films containing ball milled aripiprazole-poloxamer®407 solid dispersions

This research aimed at developing ODFs containing an antipsychotic drug - aripiprazole (ARP). ARP, as a BCS II class molecule, requires enhancing its water solubility prior to formulating. Therefore, a solid dispersion of ARP - Poloxamer® 407 was prepared by ball milling, then incorporated into the films. It was found that co-processing led to an over 100-fold increase in drug solubility in comparison with pure drug. Moreover, ODFs with solid dispersion showed faster drug release (>95% below 15 min) and disintegration (<30 s), compared with raw ARP films. These results are believed to be due to the solubilization effect of poloxamer and enhanced wettability of the film. Films containing solid dispersions were found to possess smoother film surfaces and favorable mechanical properties - flexibility and strength. The ODF formulations, prepared by a casting method, were based on three different polymers (Kollicoat® IR, Kollicoat® Protect or PVA). It was found that not only the form of the incorporated drug, but also the type of film-forming polymer had an impact on the analyzed parameters. The use of PVA was beneficial in the film formulation with aripiprazole in comparison to other tested film-forming polymers.

High-Throughput Dissolution/Permeation Screening -A 96-Well Two-Compartment Microplate Approach

Early formulation screening can alleviate development of advanced oral drug formulations, such as amorphous solid dispersions (ASDs). Traditionally, dissolution is used to predict ASD performance. Here, a high-throughput approach is described that simultaneously screens drug dissolution and permeation employing a two-compartment 96-well plate. Freeze-drying from hydro-alcoholic solutions was used to prepare amorphous formulations. The screening approach was tested on amorphous and crystalline tadalafil formulations with and without Soluplus^®. The workflow consisted of: 1) dispersion of the formulations; 2) incubation within the two-compartment plate, where a dialysis membrane separated donor (dispersed formulation) and acceptor; 3) sampling (donor and acceptor), where donor samples were centrifuged to remove non-dissolved material; and 4) quantification by UHPLC-UV. To identify optimal screening conditions, the following parameters were varied: dispersion medium (buffer / biomimetic media), acceptor medium (buffer / surfactant solutions), and incubation time (1, 3, and 6 h). Surfactants (acceptor) increased tadalafil permeation. Biomimetic medium (donor) enhanced dissolution, but not permeation, except for freeze-dried tadalafil, for which the permeated amount increased. The predictiveness was evaluated by comparing dissolution-/permeation-results with in vivo bioavailability. In general, both dissolution and permeation reflected bioavailability, whereof the latter was a better predictor. High-throughput dissolution/permeation is regarded promising for formulation screening.

Involvement of metabolism-permeability in enhancing the oral bioavailability of curcumin in excipient-free solid dispersions co-formed with piperine

Curcumin (CUR) has gained increasing interest worldwide due to multiple biological activities. However, the therapeutic application remains limited because of its low aqueous solubility, intestinal metabolism and poor membrane permeability. In present study, an excipient-free CUR solid dispersion co-formed with piperine (PIP), the absorption enhancer involving metabolism-permeability, was successfully prepared by melting and quench cooling (co-amorphous CUR-PIP). The co-amorphous CUR-PIP exhibited superior performance in non-sink dissolution compared with crystalline and amorphous CUR, and showed physically stable at least 3 months, attributing to the strong molecular interactions between CUR and PIP as evaluated by FTIR spectra. Furthermore, the combination of PIP with CUR in the co-amorphous formulation could inhibit the glucuronidation of CUR, as exhibited in the in vitro assay of rat intestinal microsomes. The co-amorphous CUR-PIP would also exhibit higher gastrointestinal membrane permeability of CUR, as confirmed by P_app of CUR in Caco-2 model. After administration of co-amorphous CUR-PIP, the AUC of CUR significantly increased by 2.16- and 1.92-fold those in crystalline and amorphous CUR, respectively. This study demonstrates that the developed co-amorphous CUR-PIP can enhance the bioavailability of CUR by increasing its dissolution, inhibiting metabolic processes, and facilitating membrane permeability.

Preparation, characterization, and evaluation of azoxystrobin nanosuspension produced by wet media milling

To improve the bioavailability of the poorly water-soluble fungicide, an azoxystrobin nanosuspension was prepared by the wet media milling method. Due to their reduced mean particle size and polydispersity index, 1-Dodecanesulfonic acid sodium salt and polyvinylpyrrolidone K30 were selected from six conventional surfactants, the content only accounting for 15% of the active compound. The mean particle size, polydispersity index, and $$\zeta$$ ζ potential of the nanosuspension were determined to be 238.1 ± 1.5 nm, 0.17 ± 0.02 and − 31.8 ± 0.3 mV, respectively. The lyophilized nanosuspension mainly retained crystalline state, with only a little amorphous content as determined by powder X-ray diffraction. Compared to conventional fungicide formulations, the nanosuspension presented an increased retention volume and a reduced contact angle, indicating enhanced wettability and adhesion. In addition, the azoxystrobin nanosuspension showed the highest antifungal activity, with a medial lethal concentration of 1.4243 μg/mL against Fusarium oxysporum. In optical micrographs, hyphal deformations of thinner and intertwined hyphae were detected in the exposed group. Compared to the control group, the total soluble protein content, superoxide dismutase, and catalase activities were initially increased and then decreased with prolonged exposure time. The azoxystrobin nanosuspension reduced the defensive antioxidant capability of Fusarium oxysporum and resulted in the generation of excessive reactive oxygen species. This study provides a novel method for preparing nanosuspension formulation of poorly soluble antifungal agents to enhance the biological activity and decrease the negative environmental impact.

Advances in Polymer Design for Enhancing Oral Drug Solubility and Delivery

Synthetic polymers have enabled amorphous solid dispersions (ASDs) to emerge as an oral delivery strategy for overcoming poor drug solubility in aqueous environments. Modern ASD products noninvasively treat a range of chronic diseases (for example, hepatitis C, cystic fibrosis, and HIV). In such formulations, polymeric carriers generate and maintain drug supersaturation upon dissolution, increasing the apparent drug solubility to enhance gastrointestinal barrier absorption and oral bioavailability. In this Review, we outline several approaches in designing polymeric excipients to drive interactions with active pharmaceutical ingredients (APIs) in spray-dried ASDs, highlighting polymer-drug formulation guidelines from industrial and academic perspectives. Special attention is given to new commercial and specialized polymer design strategies that can solubilize highly hydrophobic APIs and suppress the propensity for rapid drug recrystallization. These molecularly customized excipients and hierarchical excipient assemblies are promising toward informing early-stage drug-discovery development and reformulating existing API candidates into potentially lifesaving oral medicines for our growing global population.