Fast Light-Driven Motion of Polydopamine Nanomembranes

Fast Photoactuation and Environmental Response of Humidity-Sensitive pDAP-Silicon Nanocantilevers

Multi-responsive nanomembranes are a new class of advanced materials that can be harnessed in complex architectures for micro and nano-manipulators, artificial muscles, energy harvesting, soft robotics, and sensors. The design and fabrication of responsive membranes must meet such challenges as trade-offs between responsiveness and mechanical durability, volumetric low-cost production ensuring low environmental impact, and compatibility with standard technologies or biological systems This work demonstrates the fabrication of multi-responsive, mechanically robust poly(1,3-diaminopropane) (pDAP) nanomembranes and their application in fast photoactuators. The pDAP films are developed using a plasma-assisted polymerization technique that offers large-scale production and versatility of potential industrial relevance. The pDAP layers exhibit high elasticity with the Young's modulus of ≈7 GPa and remarkable mechanical durability across 20-80 °C temperatures. Notably, pDAP membranes reveal immediate and reversible contraction triggered by light, rising temperature, or reducing relative humidity underpinned by a reversible water sorption mechanism. These features enable the fabrication of photoactuators composed of pDAP-coated Si nanocantilevers, demonstrating ms timescale response to light, tens of µm deflections, and robust performance up to kHz frequencies. These results advance fundamental research on multi-responsive nanomembranes and hold the potential to boost versatile applications in light-to-motion conversion and sensing toward the industrial level.

Photostrictive Actuators Based on Freestanding Ferroelectric Membranes

Complex oxides offer a wide range of functional properties, and recent advances in the fabrication of freestanding membranes of these oxides are adding new mechanical degrees of freedom to this already rich functional ecosystem. Here, photoactuation is demonstrated in freestanding thin film resonators of ferroelectric Barium Titanate (BaTiO3) and paraelectric Strontium Titanate (SrTiO3). The free-standing films, transferred onto perforated supports, act as nano-drums, oscillating at their natural resonance frequency when illuminated by a frequency-modulated laser. The light-induced deflections in the ferroelectric BaTiO3 membranes are two orders of magnitude larger than in the paraelectric SrTiO3 ones. Time-resolved X-ray micro-diffraction under illumination and temperature-dependent holographic interferometry provide combined evidence for the photostrictive strain in BaTiO3 originating from a partial screening of ferroelectric polarization by photo-excited carriers, which decreases the tetragonality of the unit cell. These findings showcase the potential of photostrictive freestanding ferroelectric films as wireless actuators operated by light.

The dual nature of biomimetic melanin

Melanin-inspired nanomaterials offer unique photophysical, electronic and radical scavenging properties that are widely explored for health and environmental preservation, or energy conversion and storage. The incorporation of functional melanin building blocks in more complex nanostructures or surfaces is typically achieved via a bottom-up approach starting from a molecular precursor, in most cases dopamine. Here we demonstrate that indeed, the oxidative polymerization of dopamine, for the synthesis of melanin-like polydopamine (PDA), leads to the simultaneous formation of more than one nanosized species with different compositions, morphologies and properties. In particular, a low-density polymeric structure and dense nanoparticles (NP) are simultaneously formed. The two populations could be separated and analyzed in real time using a chromatographic technique free of any stationary phase (flow field fractionation, FFF). The results following the synthesis of melanin-like PDA showed that the NP are formed only during the first 6 hours as a result of a supramolecular self-assembly-driven polymerization, while the formation of the polymer continues for about 36 hours. The two populations were also separated and characterized using TEM, UV-vis absorption spectroscopy, fluorescence and light scattering spectroscopy, DLS, FTIR, ζ-potential measurements, gel electrophoresis and pH titrations. Interestingly, very different properties between the two populations were observed: in particular the polymer contains a higher number of catechol units (8 mmol g-1 -OH) with respect to the NP (1 mmol g-1 -OH) and presents a much higher antioxidant activity. The attenuation of light by NP is more efficient than that by the polymer especially in the Vis-NIR region. Moreover, while the NP scatter light with an efficiency up to 27% they are not fluorescent, and the polymer does not scatter light but shows an excitation wavelength-dependent fluorescence typical of multi-fluorophoric uncoupled systems.

Electropolymerization of Polydopamine at Electrode-Supported Insulating Mesoporous Films

Bioinspired, stimuli-responsive, polymer-functionalized mesoporous films are promising platforms for precisely regulating nanopore transport toward applications in water management, iontronics, catalysis, sensing, drug delivery, or energy conversion. Nanopore technologies still require new, facile, and effective nanopore functionalization with multi- and stimuli-responsive polymers to reach these complicated application targets. In recent years, zwitterionic and multifunctional polydopamine (PDA) films deposited on planar surfaces by electropolymerization have helped surfaces respond to various external stimuli such as light, temperature, moisture, and pH. However, PDA has not been used to functionalize nanoporous films, where the PDA-coating could locally regulate the ionic nanopore transport. This study investigates the electropolymerization of homogeneous thin PDA films to functionalize nanopores of mesoporous silica films. We investigate the effect of different mesoporous film structures and the number of electropolymerization cycles on the presence of PDA at mesopores and mesoporous film surfaces. Our spectroscopic, microscopic, and electrochemical analysis reveals that the amount and location (pores and surface) of deposited PDA at mesoporous films is related to the combination of the number of electropolymerization cycles and the mesoporous film thickness and pore size. In view of the application of the proposed PDA-functionalized mesoporous films in areas requiring ion transport control, we studied the ion nanopore transport of the films by cyclic voltammetry. We realized that the amount of PDA in the nanopores helps to limit the overall ionic transport, while the pH-dependent transport mechanism of pristine silica films remains unchanged. It was found that (i) the pH-dependent deprotonation of PDA and silica walls and (ii) the insulation of the indium-tin oxide (ITO) surface by increasing the amount of PDA within the mesoporous silica film affect the ionic nanopore transport.

Experimental Methods to Get Polydopamine Films: A Comparative Review on the Synthesis Methods, the Films' Composition and Properties

In 2007, polydopamine (PDA) films were shown to be formed spontaneously on the surface of all known classes of materials by simply dipping those substrates in an aerated dopamine solution at pH = 8.5 in the presence of Tris(hydroxymethyl) amino methane buffer. This universal deposition method has raised a burst of interest in surface science, owing not only to the universality of this water based one pot deposition method but also to the ease of secondary modifications. Since then, PDA films and particles are shown to have applications in energy conversion, water remediation systems, and last but not least in bioscience. The deposition of PDA films from aerated dopamine solutions is however a slow and inefficient process at ambient temperature with most of the formed material being lost as a precipitate. This incited to explore the possibility to get PDA and related films based on other catecholamines, using other oxidants than dissolved oxygen and other deposition methods. Those alternatives to get PDA and related films are reviewed and compared in this paper. It will appear that many more investigations are required to get better insights in the relationships between the preparation method of PDA and the properties of the obtained coatings.

Site-specific fabrication of a melanin-like pigment through spatially confined progressive assembly on an initiator-loaded template

Melanin-like nanomaterials have emerged in surface biofunctionalization in a material-independent manner due to their versatile adhesion arising from their catechol-rich structures. However, the unique adhesive properties of these materials ironically raise difficulties in their site-specific fabrication. Here, we report a method for site-specific fabrication and patterning of melanin-like pigments, using progressive assembly on an initiator-loaded template (PAINT), different from conventional lithographical methods. In this method, the local progressive assembly could be naturally induced on the given surface pretreated with initiators mediating oxidation of the catecholic precursor, as the intermediates generated from the precursors during the progressive assembly possess sufficient intrinsic underwater adhesion for localization without diffusion into solution. The pigment fabricated by PAINT showed efficient NIR-to-heat conversion properties, which can be useful in biomedical applications such as the disinfection of medical devices and cancer therapies.

Mussel-inspired nanoparticle composite hydrogels for hemostasis and wound healing

Uncontrolled hemorrhage caused by trauma can easily lead to death. Efficient and safe hemostatic materials are an urgent and increasing need for hemostatic research. Following a trauma, wound healing is induced by various cellular mechanisms and proteins. Hemostatic biomaterials that can not only halt bleeding quickly but also provide an environment to promote wound healing have been the focus of research in recent years. Mussel-inspired nanoparticle composite hydrogels have been propelling the development of hemostatic materials owing to their unique advantages in adhesion, hemostasis, and bacteriostasis. This review summarizes the hemostatic and antimicrobial fundamentals of polydopamine (PDA)-based nanomaterials and emphasizes current developments in hemorrhage-related PDA nanomaterials. Moreover, it briefly discusses safety concerns and clinical application problems with PDA hemostatic nanomaterials.

Mussel-Inspired Robust Peony-like Cu3(PO4)2 Composite Switchable Superhydrophobic Surfaces for Bidirectional Efficient Oil/Water Separation

To alleviate the economic and environmental damage caused by industrial discharges of oily wastewater, materials applied for efficient oil/water separation are receiving significant attention from researchers and engineers. Among others, switchable wettable materials for bidirectional oil/water separation show great potential for practical applications. Inspired by mussels, we utilized a simple immersion method to construct a polydopamine (PDA) coating on a peony-like copper phosphate surface. Then, TiO₂ was deposited on the PDA coating surface to build a micro-nano hierarchical structure, which was modified with octadecanethiol (ODT) to obtain a switchable wettable peony-like superhydrophobic surface. The water contact angle of the obtained superhydrophobic surface reached 153.5°, and the separation efficiency was as high as 99.84% with a flux greater than 15,100 L/(m²·h) after 10 separation cycles for a variety of heavy oil/water mixtures. Notably, the modified membranes have a unique photoresponsiveness, transforming to superhydrophilic upon ultraviolet irradiation, achieving separation efficiencies of up to 99.83% and separation fluxes greater than 32,200 L/(m²·h) after 10 separation cycles for a variety of light oil/water mixtures. More importantly, this switch behavior is reversible, and the high hydrophobicity can be restored after heating to achieve efficient separation of heavy oil/water mixtures. In addition, the prepared membranes can maintain high hydrophobicity under acid-base conditions and after 30 sandpaper abrasion cycles, and damaged membranes can be restored to superhydrophobicity after a brief modification in the ODT solution. This simple-to-prepare, easy-to-repair, robust membrane with switchable wettability shows great potential in the field of oil/water separation.

Adaptive 2D and Pseudo-2D Systems: Molecular, Polymeric, and Colloidal Building Blocks for Tailored Complexity

Two-dimensional and pseudo-2D systems come in various forms. Membranes separating protocells from the environment were necessary for life to occur. Later, compartmentalization allowed for the development of more complex cellular structures. Nowadays, 2D materials (e.g., graphene, molybdenum disulfide) are revolutionizing the smart materials industry. Surface engineering allows for novel functionalities, as only a limited number of bulk materials have the desired surface properties. This is realized via physical treatment (e.g., plasma treatment, rubbing), chemical modifications, thin film deposition (using both chemical and physical methods), doping and formulation of composites, or coating. However, artificial systems are usually static. Nature creates dynamic and responsive structures, which facilitates the formation of complex systems. The challenge of nanotechnology, physical chemistry, and materials science is to develop artificial adaptive systems. Dynamic 2D and pseudo-2D designs are needed for future developments of life-like materials and networked chemical systems in which the sequences of the stimuli would control the consecutive stages of the given process. This is crucial to achieving versatility, improved performance, energy efficiency, and sustainability. Here, we review the advancements in studies on adaptive, responsive, dynamic, and out-of-equilibrium 2D and pseudo-2D systems composed of molecules, polymers, and nano/microparticles.

Temperature-Regulated Core Swelling and Asymmetric Shrinkage for Tunable Yolk@Shell Polydopamine@Mesoporous Silica Nanostructures

Facile and controllable synthesis of functional yolk@shell structured nanospheres with a tunable inner core ('yolk') and mesoporous shell is highly desirable, yet it remains a great challenge. Herein, xx developed a strategy based on temperature-regulated swelling and restricted asymmetric shrinkage of polydopamine (PDA) nanospheres, combined with heterogeneous interface self-assembly growth. This method allows a simple and versatile preparation of PDA@mesoporous silica (MS) nanospheres exhibiting tunable yolk@shell architectures and shell pore sizes. Through reaction temperature-regulated swelling degree and confined shrinkage of PDA nanospheres, the volume ratio of the hollow cavity that the PDA core occupies can easily be tuned from ca. 2/3 to ca. 1/2, then to ca. 2/5, finally to ca. 1/3. Owing to the presence of PDA with excellent photothermal conversion capacity, the PDA@MS nanocomposites with asymmetric yolk distributions can become a colloidal nanomotor propelled by near-infrared (NIR) light. Noteworthily, the PDA@MS with half PDA yolk and microcracks in silica shell reaches 2.18 µm² s^-1 of effective diffusion coefficient (De) in the presence of 1.0 W cm^-2 NIR light. This temperature-controlled swelling approach may provide new insight into the design and facile preparation of functional PDA-based yolk@shell structured nanocomposites for wide applications in biology and medicine.

Dimensionality Mediated Highly Repeatable and Fast Transformation of Coordination Polymer Single Crystals for All-Optical Data Processing

A family of coordination polymers (CPs) based on dynamic structural elements are of great fundamental and commercial interest addressing modern problems in controlled molecular separation, catalysis, and even data processing. Herein, the endurance and fast structural dynamics of such materials at ambient conditions are still a fundamental challenge. Here, we report on the design of a series of Cu-based CPs [Cu(bImB)Cl₂] and [Cu(bImB)₂Cl₂] with flexible ligand bImB (1,4-bis(imidazol-1-yl)butane) packed into one- and two-dimensional (1D, 2D) structures demonstrating dimensionality mediated flexibility and reversible structural transformations. Using the laser pulses as a fast source of activation energy, we initiate CP heating followed by anisotropic thermal expansion and 0.2-0.8% volume changes with the record transformation rates from 2220 to 1640 s^-1 for 1D and 2D CPs, respectively. The endurance over 10³ cycles of structural transformations, achieved for the CPs at ambient conditions, allows demonstrating optical fiber integrated all-optical data processing.

Visible-Light-Driven Antimicrobial Activity and Mechanism of Polydopamine-Reduced Graphene Oxide/BiVO4 Composite

In this study, a photocatalytic antibacterial composite of polydopamine-reduced graphene oxide (PDA-rGO)/BiVO4 is prepared by a hydrothermal self-polymerization reduction method. Its morphology and physicochemical properties are characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier-transform infrared (FT-IR), and X-ray diffraction (XRD). The results indicate that BiVO4 particles are evenly distributed on the rGO surface. Escherichia coli (E. coli) MG1655 is selected as the model bacteria, and its antibacterial performance is tested by flat colony counting and the MTT method under light irradiation. PDA-rGO/BiVO4 inhibits the growth of E. coli under both light and dark conditions, and light significantly enhances the bacteriostasis of PDA-rGO/BiVO4. A combination of BiVO4 with PDA-rGO is confirmed by the above characterization methods as improving the photothermal performance under visible light irradiation. The composite possesses enhanced photocatalytic antibacterial activity. Additionally, the photocatalytic antibacterial mechanism is investigated via the morphology changes in the SEM images of MG1655 bacteria, 2′,7′-dichlorofluorescein diacetate (DCFH-DA), the fluorescence detection of the reactive oxygen species (ROS), and gene expression. These results show that PDA-rGO/BiVO4 can produce more ROS and lead to bacterial death. Subsequently, the q-PCR results show that the transmembrane transport of bacteria is blocked and the respiratory chain is inhibited. This study may provide an important strategy for expanding the application of BiVO4 in biomedicine and studying the photocatalytic antibacterial mechanism.