Flow Chemistry on Multigram Scale: Continuous Synthesis of Boronic Acids within 1 s

Metal-free synthesis of selenoesters directly from carboxylic acids using bifunctional selenoureas under batch and continuous-flow conditions

A new metal-free method for the synthesis of selenoesters directly from carboxylic acids in a flow reactor is reported. The carboxylic acids, Michael acceptors, and bifunctional selenoureas (source of selenium and nucleophile, activator of carbonyl group) were reacted to obtain selenoesters (up to 70% yield). An evidence-backed plausible mechanism is also presented.

Gram Scale Synthesis of Membrane-Active Antibacterial 4-Quinolone Lead Compound

An improved method for the synthesis of a new quinolone class of antibiotics, which are exceptionally potent against gram-positive bacteria, has been developed and the structure confirmed by single-crystal X-ray analysis. In the course of synthesis, using either Chan-Lam coupling or Buchwald-Hartwig amination, we have shown that the careful choice of protecting group at the C4 position of the quinoline is required for selective amination at the C5 position and subsequent deprotection to avoid the formation of a novel pyrido[4,3,2-de]quinazoline tetracycle.

Enhancing Metalating Efficiency of the Sodium Amide NaTMP in Arene Borylation Applications

Though LiTMP (TMP=2,2',6,6'-tetramethylpiperidide) is a commonly used amide, surprisingly the heavier NaTMP has hardly been utilised. Here, by mixing NaTMP with tridentate donor PMDETA (N,N,N',N'',N''-pentamethyldiethylenetriamine), we provide structural, and mechanistic insights into the sodiation of non-activated arenes (e.g. anisole and benzene). While these reactions are low yielding, adding B(OiPr)3 has a profound effect, not only by intercepting the CAr -Na bond, but also by driving the metalation reaction towards quantitative formation of more stabilized sodium aryl boronates. Demonstrating its metalating power, regioselective C2-metalation/borylation of naphthalene has been accomplished contrasting with single-metal based protocols which are unselective and low yielding. Extension to other arenes allows for in situ generation of aryl boronates which can then directly engage in Suzuki-Miyaura couplings, furnishing a range of biaryls in a selective and efficient manner.

Cyanide-Free Cyanation of sp2 and sp-Carbons by Oxazole based Masked CN Source Using Flow Microreactors

We herein report a cyanide-free continuous-flow process for cyanation of sp 2 and sp carbons to synthesize aryl, vinyl and acetylenic nitriles from (5-methyl-2-phenyloxazol-4-yl) boronic acid [OxBA] reagent as a sole source of carbon-bound masked -CN source. Non-toxic and stable OxBA reagent is generated by lithiation-borylation of bromo-oxazole, and the consecutive Suzuki-Miyaura cross-coupling with aryl, vinyl, or acetylenic halides and demasking [4 + 2]/retro-[4 + 2] sequence were successfully accomplished to give the desired cyano compounds with reasonably good yields in a four-step flow manner. A unique feature of this cyanation protocol in flow enables to cyanate a variety of sp 2 and sp carbons to produce a broad spectrum of aryl acetonitrile. It is envisaged that the OxBA based cyanation would replace existing unstable and toxic approaches as well as non-toxic cyanation using two different sources of "C" and "N" to incorporate the -CN group.

Development of an Antibiotic Resistance Breaker to Resensitize Drug-Resistant Staphylococcus aureus: In Silico and In Vitro Approach

Efflux pumps are one of the predominant microbial resistant mechanisms leading to the development of multidrug resistance. In Staphylococcus aureus, overexpression of NorA protein enables the efflux of antibiotics belonging to the class of fluoroquinolones and, thus, makes S. aureus resistant. Hence, NorA efflux pumps are being extensively exploited as the potential drug target to evade bacterial resistance and resensitize bacteria to the existing antibiotics. Although several molecules are reported to inhibit NorA efflux pump effectively, boronic acid derivatives were shown to have promising NorA efflux pump inhibition. In this regard, the current study exploits 6-(3-phenylpropoxy)pyridine-3-boronic acid to further improve the activity and reduce cytotoxicity using the bioisostere approach, a classical medicinal chemistry concept. Using the SWISS-Bioisostere online tool, from the parent compound, 42 compounds were obtained upon the replacement of the boronic acid. The 42 compounds were docked with modeled NorA protein, and key molecular interactions of the prominent compounds were assessed. The top hit compounds were further analyzed for their drug-like properties using ADMET studies. The identified potent lead, 5-nitro-2-(3-phenylpropoxy)pyridine (5-NPPP), was synthesized, and in vitro efficacy studies have been proven to show enhanced efflux inhibition, thus acting as a potent antibiotic breaker to resensitize S. aureus without elucidating any cytotoxic effect to the host Hep-G2 cell lines.

Nickel-Catalyzed Ipso-Borylation of Silyloxyarenes via C-O Bond Activation

The conversion of silyloxyarenes to boronic acid pinacol esters via nickel catalysis is described. In contrast to other borylation protocols of inert C-O bonds, the method is competent in activating the carbon-oxygen bond of silyloxyarenes in isolated aromatic systems lacking a directing group. The catalytic functionalization of benzyl silyl ethers was also achieved under these conditions. Sequential cross-coupling reactions were achieved by leveraging the orthogonal reactivity of silyloxyarenes, which could then be functionalized subsequently.

Continuous flow as an enabling technology: a fast and versatile entry to functionalized glyoxal derivatives

We herein report two complementary strategies employing organolithium chemistry for the synthesis of glyoxal derivatives. Micro-mixer technology allows for the generation of unstable organometallic intermediates and their instantaneous in-line quenching with esters as electrophiles. Selective mono-addition was observed via putative stabilized tetrahedral intermediates. Advantages offered by flow chemistry technologies facilitate direct and efficient access to masked 1,2-dicarbonyl compounds while mitigating undesired by-product formation. These two approaches enable the production of advanced and valuable synthetic building blocks for heterocyclic chemistry with throughputs of grams per minute.

Solvation Effects on the Structure and Stability of Alkali Metal Carbenoids

s-Block metal carbenoids are carbene synthons and applied in a myriad of organic transformations. They exhibit a strong structure-activity relationship, but this is only poorly understood due to the challenging high reactivity and sensitivity of these reagents. Here, we report on systematic VT and DOSY NMR studies, XRD analyses as well as DFT calculations on a sulfoximinoyl-substituted model system to explain the pronounced solvent dependency of the carbenoid stability. While the sodium and potassium chloride carbenoids showed high stabilities independent of the solvent, the lithium carbenoid was stable at room temperature in THF but decomposed at -10 °C in toluene. These divergent stabilities could be explained by the different structures formed in solution. In contrast to simple organolithium reagents, the monomeric THF-solvate was found to be more stable than the dimer in toluene, since the latter more readily forms direct Li/Cl interactions which facilitate decomposition via α-elimination.

Development and Scale-up of the Rapid Synthesis of Triphenyl Phosphites in Continuous Flow

A novel method for the synthesis of triphenyl phosphite and its derivatives has been developed in continuous flow. With a total residence time of 20 s, the target product was prepared in a microreactor, and the reaction time was significantly shortened compared with standard single batch reaction conditions. In addition, the reaction of various substrates gave the corresponding products in good to excellent yields under optimized conditions. The reactants could be employed in a stoichiometric ratio, making the reaction more efficient, economical, and environmentally friendly. In addition, scale-up apparatus was designed and assembled, and the kilogram-scale production (up to 18.4 kg/h) of tris(2,4-di-tert-butylphenyl) phosphite was achieved in 88% yield.

Flow Technology for the Genesis and Use of (Highly) Reactive Organometallic Reagents

In the field of organic synthesis, the advent of flow chemistry and flow microreactor technology represented a tremendous novelty in the way of thinking and performing chemical reactions, opening the doors to poorly explored or even impossible transformations using batch methods. In this Concept article, we would like to highlight the impact of flow chemistry for exploiting highly reactive organometallic reagents, and how, alongside the well-known advantages concerning safety, scalability, and productivity, flow chemistry makes possible processes that are impossible to control by using the traditional batch approach.

Influence of fluorine substituents on the properties of phenylboronic compounds

Rapid development of research on the chemistry of boronic acids is connected with their applications in organic synthesis, analytical chemistry, materials’ chemistry, biology and medicine. In many applications Lewis acidity of boron atoms plays an important role. Special group of arylboronic acids are fluoro-substituted compounds, in which the electron withdrawing character of fluorine atoms influences their properties. The present paper deals with fluoro-substituted boronic acids and their derivatives: esters, benzoxaboroles and boroxines. Properties of these compounds, i.e. acidity, hydrolytic stability, structures in crystals and in solution as well as spectroscopic properties are discussed. In the next part examples of important applications are given.

A Lewis Base Catalysis Approach for the Photoredox Activation of Boronic Acids and Esters

We report herein the use of a dual catalytic system comprising a Lewis base catalyst such as quinuclidin-3-ol or 4-dimethylaminopyridine and a photoredox catalyst to generate carbon radicals from either boronic acids or esters. This system enabled a wide range of alkyl boronic esters and aryl or alkyl boronic acids to react with electron-deficient olefins via radical addition to efficiently form C-C coupled products in a redox-neutral fashion. The Lewis base catalyst was shown to form a redox-active complex with either the boronic esters or the trimeric form of the boronic acids (boroxines) in solution.

The Hitchhiker's Guide to Flow Chemistry ∥

Flow chemistry involves the use of channels or tubing to conduct a reaction in a continuous stream rather than in a flask. Flow equipment provides chemists with unique control over reaction parameters enhancing reactivity or in some cases enabling new reactions. This relatively young technology has received a remarkable amount of attention in the past decade with many reports on what can be done in flow. Until recently, however, the question, "Should we do this in flow?" has merely been an afterthought. This review introduces readers to the basic principles and fundamentals of flow chemistry and critically discusses recent flow chemistry accounts.

Dichloromethyllithium: Synthesis and Application in Continuous Flow Mode

A simple and robust procedure for the synthesis and use of thermally unstable dichloromethyllithium in continuous flow mode is described. By utilizing residence times in the range of milliseconds for the generation and electrophilic quench of dichloromethyllithium, the straightforward synthesis of dichlorocarbinols and benzylic pinacol esters was realized at reaction temperatures of -30 °C, whereas typical temperatures in traditional batch mode are below -78 °C. The excellent purity profile obtained from the flow process allows us to directly telescope the exiting flow stream into semibatch quenches for further modifications. All transformations gave the desired products in remarkable purity and yield on gram scale with no need for chromatography.