Realizing 22.3% EQE and 7-Fold Lifetime Enhancement in QLEDs via Blending Polymer TFB and Cross-Linkable Small Molecules for a Solvent-Resistant Hole Transport Layer

Optimization of the hole-injection layer for quantum dot light-emitting diodes

Quantum dot light-emitting diodes (QLEDs) are regarded as cornerstones of next-generation display technologies owing to their broad spectral tunability, high color purity, and exceptional efficiency. However, the deep valence band energy levels of quantum dots (QDs) result in a high hole-injection barrier, leading to a charge-injection imbalance and limiting the device performance. This review systematically summarizes the optimization strategies for the hole-injection layer (HIL) in QLEDs, focusing on the design and application of organic single-layer HILs (e.g., PEDOT : PSS), inorganic single-layer HILs (e.g., MoO3, NiOx, and V2O5), dual HIL structures (e.g., PEDOT : PSS/metal oxide), and doped HILs (e.g., metal-ion doping and organic-inorganic hybridization). Studies have demonstrated that dual HILs reduce the hole-injection barrier through stepped energy levels, doping strategies enhance the carrier mobility and interfacial stability, and metal oxide HILs exhibit superior thermal stability and environmental adaptability. Additionally, post-treatment processes such as rapid thermal annealing (RTA) can further optimize the interfacial properties. Although QLEDs possess immense potential in display and lighting applications, challenges remain in addressing the insufficient efficiency of cadmium-free blue QLEDs and the interfacial strain mismatch in flexible devices. This review provides a comprehensive reference for the rational design of HILs and outlines future directions for developing high-efficiency, stable, and scalable QLEDs.

Tailoring the Interfacial Composition of Heterostructure InP Quantum Dots for Efficient Electroluminescent Devices

The formation of core-shell quantum dots (QDs) with type-I band alignment results in surface passivation, ensuring the efficient confinement of excitons for light-emitting applications. In such cases, the atomic composition at the core-shell heterojunction significantly affects the optical, and electrical properties of the QDs. However, for InP cores, shell materials are limited to compositions consisting of II-VI group elements. The restricted selection of shell materials leads to an interfacial misfit, resulting in a charge imbalance at the core-shell heterojunction. In this study, the effect of interfacial stoichiometry is investigated on the optical, and electrical properties of InP core-shell QDs. Direct Se injection strategy is employed during the synthesis of the InP core to regulate the interfacial chemical composition, resulting in the formation of an InZnSe alloy on the core surface. This InZnSe layer reduces the misfit between the InP core, and ZnSe shell, leading to a remarkable photoluminescence quantum yield of 95% with a narrow emission bandwidth of 34 nm. The InZnSe interlayer significantly influences the electroluminescence (EL) processes, increasing the charge injection efficiency, and mitigating charge imbalance. A green-emitting EL device is demonstrated with a maximum luminance of 26370 cd m-2, and a peak current efficiency of 31.5 cd A-1.

Ultra-High-Resolution Full-Color Quantum Dot Light-Emitting Diodes through Cross-Linking-Assisted Hierarchical Confined Assembly

Quantum dots (QDs) are vital for virtual reality and augmented reality displays due to their tunable optical properties. Although QD color converters enable blue light-emitting diode down-conversion to green/red, efficiency and stability issues hinder their high-end display applications. Here, we employ a cross-linking-assisted hierarchical confined assembly method to fabricate red, green, and blue QD arrays. Specifically, micropillar templates with asymmetric wettability are used to sequentially deposit green and red QD microwire arrays in mutually orthogonal directions on a blue QD film, forming RGB QD arrays. 4,4'-Bis(3-vinyl-9H-carbazol-9-yl)1,1'-biphenyl (CBP-V) is introduced into QDs to solve the problem of color crosstalk. Full-color QD pixel arrays with resolutions of 1814-2117 pixels per inch (PPI) are successfully fabricated. Upon integration into devices, adjustable emission from cool white light to warm white light is observed, with a peak external quantum efficiency (EQE) of 16.14% and a peak luminance of 226 054 cd m-2.

Efficient and stable near-infrared InAs quantum dot light-emitting diodes

Visible quantum dot light-emitting diodes have satisfied commercial display requirements. However, near-infrared counterparts considerably lag behind due to the inferior quality of near-infrared quantum dots and limitations in device architecture suitable for near-infrared electroluminescence. Here, we present an efficient strategy using zinc fluoride to balance ZnSe shell growth across different core quantum dot facets, producing highly regular InAs/InP/ZnSe/ZnS quantum dots with near-unity quantum yield. Moreover, we develop a method of in-situ photo-crosslinking blended hole-transport materials for accurate energy level modulation. The crosslinked hole-transport layers enhance hole transfer to the emitting layer for balanced carrier dynamics in quantum dot light-emitting diodes. The resulting near-infrared quantum dot light-emitting diodes exhibit a peak external quantum efficiency of 20.5%, a maximum radiance of 581.4 W sr-1 m-2 and an operational half-lifetime of 550 h at 50 W sr-1 m-2. This study represents a step towards practical application of near-infrared quantum dot light-emitting diodes.

Photothermally Cross-Linkable Polymeric Hole Transport Material Functionalized with Azide for High-Performance Quantum Dot Light-Emitting Diodes

Poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-(4,4'-(N-(4-butylphenyl)))] (TFB) is a widely used hole transport material (HTM) in quantum dot light-emitting diodes (QLEDs). However, TFB-based solution-processed QLEDs face several challenges, including interlayer erosion, low hole mobility, shallow energy level of the highest occupied molecular orbital, and current leakage, which compromise the device efficiency and stability. To overcome these challenges, bromine and azide-based photothermally cross-linkable TFB derivatives, i.e., TFB-Br and TFB-N3, were designed and synthesized. TFB-N3 photothermally cross-linked under 254 nm ultraviolet light at 140 °C exhibited excellent solvent resistance within 30 s. Furthermore, the photothermally cross-linked TFB-N3 formed a compact three-dimensional (3D) network in QLEDs, enhancing hole transport and reducing the leakage current. Moreover, the HOMO energy level in photothermally cross-linked TFB-N3 decreased to -5.39 eV from that in TFB (-5.30 eV), reducing the hole transport energy barrier. Thus, the charge balance in the quantum dot (QD) layer was enhanced, and the current leakage was reduced, improving the overall QLED performance. The photothermally cross-linked TFB-N3-based QLEDs achieved a maximum external quantum efficiency of 19.53%, i.e., 61% higher than that of devices using TFB. Moreover, the T90 lifetime of the photothermally cross-linked TFB-N3-based QLEDs was 4.49 times longer than that of TFB-based devices. The proposed strategy demonstrates that incorporating azide groups into polymeric HTMs can considerably enhance their hole transport and solvent resistance and reduce leakage current, improving QLED efficiency and stability.

Interfacial Dipole Engineering for Energy Level Alignment in NiOx-Based Quantum Dot Light-Emitting Diodes

The solution-derived non-stoichiometric nickel oxide (NiOx) is a promising hole-injecting material for stable quantum dot light-emitting diodes (QLEDs). However, the carrier imbalance due to the misalignment of energy levels between the NiOx and polymeric hole-transporting layers (HTLs) curtails the device efficiency. In this study, the modification of the NiOx surface is investigated using either 3-cyanobenzoic acid (3-CN-BA) or 4-cyanobenzoic acid (4-CN-BA) in the QLED fabrication. Morphological and electrical analyses revealed that both 4-CN-BA and 3-CN-BA can enhance the work function of NiOx, reduce the oxygen vacancies on the NiOx surface, and facilitate a uniform morphology for subsequent HTL layers. Moreover, it is found that the binding configurations of dipole molecules as a function of the substitution position of the tail group significantly impact the work function of underlying layers. When integrated in QLEDs, the modification layers resulted in a significant improvement in the electroluminescent efficiency due to the enhancement of energy level alignment and charge balance within the devices. Specifically, QLEDs incorporating 4-CN-BA achieved a champion external quantum efficiency (EQE) of 20.34%, which is a 1.8X improvement in comparison with that of the devices utilizing unmodified NiOx (7.28%). Moreover, QLEDs with 4-CN-BA and 3-CN-BA modifications exhibited prolonged operational lifetimes, indicating potential for practical applications.

PEDOT:PSS-Free Quantum-Dot Light-Emitting Diode with Enhanced Efficiency and Stability

Although high-performance quantum-dot light-emitting diodes (QLEDs) have been achieved, their stability is still limited due to the use of unstable PEDOT:PSS as the hole injection layer (HIL). Here, we developed a PEDOT:PSS-free QLED by using a binary PTAA:F4-TCNQ HIL. Because the PTAA, with a highest occupied molecular orbital (HOMO) level of ∼5.20 eV, can facilitate hole injection from ITO to the hole transport layer, and the F4-TCNQ can act as the electron acceptor dopant to improve the hole density and hole mobility of PTAA, the PTAA:F4-TCNQ HIL can exhibit excellent hole injection capability. As a result, the PEDOT:PSS-free QLED can exhibit a high EQE of 24.19% and an impressive brightness of 367,200 cd/m2, which are significantly higher than those of conventional QLEDs. Moreover, due to the improvement of device performance and the removal of PEDOT:PSS, the PEDOT:PSS-free QLED can also exhibit a high T95 operational lifetime of 4206 h at 1000 cd/m2 and an excellent T80 shelf lifetime of 207.41 h at 136400 cd/m2, which are about 1.6- and 3.3-fold those of conventional QLEDs, respectively. We believe that the demonstrated PEDOT:PSS-free QLED, with higher performance and stability, will promote the practical application of QLEDs in displays.

Controlling Drying Conditions in Vacuum for Uniform Film Formation in Inkjet-Printed OLEDs

The drying process of inkjet-printed organic light-emitting diodes (OLEDs) is influenced by both ink properties and external environmental factors, which ultimately affect the film profile. First, we conducted a detailed investigation of the drying time based on changes in the boiling point (BP) of mixed solvents and analyzed the correlation with the film profile. Under atmospheric drying conditions in a nitrogen (N2) atmosphere, the increased drying time under capillary-driven flow leads to greater particle movement toward the edges, significantly increasing the coffee-ring effect. Additionally, using a high-boiling-point solvent mixture of ethyl 4-methylbenzoate (EMB) and 2-ethylhexyl benzoate (EHB), we produced uniform thin films both between and within pixels (inter and intrapixel uniformity) through a vacuum drying process. In particular, we proposed a drying process model that divides the drying of inkjet pixels into a microfluidic phase and a gelation phase. Through five gelation phase-controlled vacuum drying experiments, the morphology within the pixels was precisely investigated. By sufficiently removing residual solvents after the microfluidic phase and then proceeding with heating, we produced uniform thin films. Furthermore, we fabricated OLED devices using this gelation phase-controlled vacuum drying process, achieving uniform pixel emission and improved device performance.

Recent Progress of Quantum Dots Light-Emitting Diodes: Materials, Device Structures, and Display Applications

Colloidal quantum dots (QDs), as a class of 0D semiconductor materials, have generated widespread interest due to their adjustable band gap, exceptional color purity, near-unity quantum yield, and solution-processability. With decades of dedicated research, the potential applications of quantum dots have garnered significant recognition in both the academic and industrial communities. Furthermore, the related quantum dot light-emitting diodes (QLEDs) stand out as one of the most promising contenders for the next-generation display technologies. Although QD-based color conversion films are applied to improve the color gamut of existing display technologies, the broader application of QLED devices remains in its nascent stages, facing many challenges on the path to commercialization. This review encapsulates the historical discovery and subsequent research advancements in QD materials and their synthesis methods. Additionally, the working mechanisms and architectural design of QLED prototype devices are discussed. Furthermore, the review surveys the latest advancements of QLED devices within the display industry. The narrative concludes with an examination of the challenges and perspectives of QLED technology in the foreseeable future.

High-Performance Up-Conversion Photodetectors with Zero-Barrier Interconnection via Self-Assembled Surface Dipoles

The performance of lead sulfide (PbS) quantum-dot-based up-conversion photodetectors is greatly limited owing to a large potential barrier at the interconnection layer between the photodetecting (PD) unit and light-emitting (LED) unit. Thus, very high driving voltage is required, rendering high energy consumption and poor working stability. By introducing azetidinium iodide (AzI) at the PD/LED interface, zero-barrier interconnection was achieved for the PbS-based infrared up-conversion photodetectors. The turn-on voltage under infrared illumination was greatly reduced to 1.2 V and a high photon-to-photon conversion efficiency (ηpp) of ∼3% was obtained at 3 V, showing a 10-fold enhancement compared to those previously reported devices. The mechanism for the regulation of interface energy level alignments was related to the self-assembly of the AzI dipole molecules, resulting from the van der Waals force between the S atoms in the ligands of PbS and the protonated H atoms around N atoms in AzI.

Boosting External Quantum Efficiency of Blue Perovskite QLEDs Exceeding 23% by Trifluoroacetate Passivation and Mixed Hole Transportation Design

Perovskite quantum dot-based light-emitting diodes (QLEDs) have been considered a promising display technology due to their wide color gamut for authentic color expression. Currently, the external quantum efficiency (EQE) for state-of-the-art blue perovskite QLEDs is about 15%, which still lags behind its green and red counterparts (>25%) and blue film-based LEDs. Here, blue perovskite QLEDs that achieve an EQE of 23.5% at 490 nm is presented, to the best knowledge, which is the highest value reported among blue perovskite-based LED fields. This impressive efficiency is achieved through a combination of quantum dot (QD) passivation and optimal device design. First, blue mixed halide perovskite CsPbCl3- xBrx QDs passivated by trifluoroacetate exhibit excellent exciton recombination behavior with a photoluminescence quantum yield of 84% due to reducing uncoordinated Pb surface defects. Furthermore, the device is designed by introducing a mixed hole-transport layer (M-HTL) to increase hole injection and transportation capacity and improve carrier balance. It is further found that M-HTL can decrease carrier leakage and increase radiative recombination in the device, evidenced by the visual electroluminescence spectrum at 2.0 V. The work breaks through the EQE gap of 20% for blue perovskite-based QLEDs and significantly promotes their commercialization process.

Nondestructive Direct Patterning of Both Hole Transport and Emissive Layers for Pixelated Quantum-Dot Light-Emitting Diodes

Considering the increasing demand for high-resolution light-emitting diodes (LEDs), it is important that direct fine patterning technologies for LEDs be developed, especially for quantum-dot LEDs (QLEDs). Traditionally, the patterning of QLEDs relies on resin-based photolithography techniques, requiring multiple steps and causing performance deterioration. Nondestructive direct patterning may provide an easy and stepwise method to achieve fine-pixelated units in QLEDs. In this study, two isomeric tridentate cross-linkers (X8/X9) are presented and can be blended into the hole transport layer (HTL) and the emissive layer (EML) of QLEDs. Because of their photosensitivity, the in situ cross-linking process can be efficiently triggered by ultraviolet irradiation, affording high solvent resistance and nondestructive direct patterning of the layers. Red QLEDs using the cross-linked HTL demonstrate an impressive external quantum efficiency of up to 22.45%. Through lithographic patterning enabled by X9, line patterns of HTL and EML films exhibit widths as narrow as 2 and 4 μm, respectively. Leveraging the patterned HTL and EML, we show the successful fabrication of pixelated QLED devices with an area size of 3 × 3 mm2, alongside the successful production of dual-color pixelated QLED devices. These findings showcase the promising potential of direct patterning facilitated by engineered cross-linkers for the cost-effective fabrication of pixelated QLED displays.

Well-type thick-shell quantum dots combined with double hole transport layers device structure assisted realization of high-performance quantum dot light-emitting diodes

Quantum dot (QD) light-emitting diodes (QLEDs) are promising for next-generation lighting and displays. Considering the optimization design of both the QD and device structure is expected to improve the QLED's performance significantly but has rarely been reported. Here, we use the thick-shell QDs combined with a dual-hole transport layer device structure to construct a high-efficiency QLED. The optimized thick-shell QDs with CdS/CdSe/CdS/ZnS seed/spherical quantum well/shell/shell geometry exhibit a high photoluminescence quantum yield of 96% at a shell thickness of 5.9 nm. The intermediate emissive CdSe layer with coherent strain ensures defect-free growth of the thick CdS and ZnS outer shells. Based on the orthogonal solvents assisted Poly-TPD&PVK dual-hole transport layer device architecture, the champion QLED achieved a maximum external quantum efficiency of 22.5% and a maximum luminance of 259955 cd m-2, which are 1.6 and 3.7 times that of thin-shell QDs based devices with single hole transport layer, respectively. Our study provides a feasible idea for further improving the performance of QLED devices.

Low-Temperature Cross-Linked Hole Transport Layer for High-Performance Blue Quantum-Dot Light-Emitting Diodes

Quantum-dot light-emitting diodes (QLEDs), a kind of promising optoelectronic device, demonstrate potential superiority in next-generation display technology. Thermal cross-linked hole transport materials (HTMs) have been employed in solution-processed QLEDs due to their excellent thermal stability and solvent resistance, whereas the unbalanced charge injection and high cross-linking temperature of cross-linked HTMs can inhibit the efficiency of QLEDs and limit their application. Herein, a low-temperature cross-linked HTM of 4,4'-bis(3-(((4-vinylbenzyl)oxy)methyl)-9H-carbazol-9-yl)-1,1'-biphenyl (DV-CBP) with a flexible styrene side chain is introduced, which reduces the cross-linking temperature to 150 °C and enhances the hole mobility up to 1.01 × 10-3 cm2 V-1 s-1. More importantly, the maximum external quantum efficiency of 21.35% is successfully obtained on the basis of the DV-CBP as a cross-linked hole transport layer (HTL) for blue QLEDs. The low-temperature cross-linked high-mobility HTL using flexible side chains could be an excellent alternative for future HTL development.

Photothermal Synergic Cross-Linking Hole Transport Layer for Highly Efficient RGB QLEDs

Developing an insoluble cross-linkable hole transport layer (HTL) plays an important role for solution-processed quantum dots light-emitting diodes (QLEDs) to fabricate a multilayer device with separated quantum dots layers and HTLs. In this work, a facile photothermal synergic cross-linking strategy is simultaneous annealing and UV irradiation to form the high-quality cross-linked film as the HTL without any photoinitiator, which efficiently reduces the cross-linking temperature to the low temperature of 130 °C and enhances the hole mobility of the 3-vinyl-9-{4-[4-(3-vinylcarbazol-9-yl)phenyl]phenyl}carbazole (CBP-V) thin films. The obtained high-quality cross-linked CBP-V films exhibited smooth morphology, excellent solvent resistance, and high mobility. Moreover, the high-performance red, green, and blue (RGB) QLEDs are successfully fabricated by using the photothermal synergic cross-linked HTLs, which achieved the maximum external quantum efficiency of 25.69, 24.42, and 16.51%, respectively. This work presents a strategy of using the photothermal synergic cross-linked HTLs for fabrication of high-performance QLEDs and advancing their related device applications.

Ligand-Nondestructive Direct Photolithography Assisted by Semiconductor Polymer Cross-Linking for High-Resolution Quantum Dot Light-Emitting Diodes

The photolithographic patterning of fine quantum dot (QD) films is of great significance for the construction of QD optoelectronic device arrays. However, the photolithography methods reported so far either introduce insulating photoresist or manipulate the surface ligands of QDs, each of which has negative effects on device performance. Here, we report a direct photolithography strategy without photoresist and without engineering the QD surface ligands. Through cross-linking of the surrounding semiconductor polymer, QDs are spatially confined to the network frame of the polymer to form high-quality patterns. More importantly, the wrapped polymer incidentally regulates the energy levels of the emitting layer, which is conducive to improving the hole injection capacity while weakening the electron injection level, to achieve balanced injection of carriers. The patterned QD light-emitting diodes (with a pixel size of 1.5 μm) achieve a high external quantum efficiency of 16.25% and a brightness of >1.4 × 105 cd/m2. This work paves the way for efficient high-resolution QD light-emitting devices.

The warming-up effects of quantum-dot light emitting diodes: A reversible stability issue related to shell traps

The aging phenomenon is commonly observed in quantum-dot light emitting diodes (QLEDs), involving complex chemical or physical processes. Resolving the underlying mechanism of these aging issues is crucial to deliver reliable electroluminescent devices in future display applications. Here, we report a reversible positive aging phenomenon that the device brightness and efficiency significantly improve after device operation, but recover to initial states after long-time storage or mild heat treatment, which can be termed as warming-up effects. Steady and transient equivalent circuit analysis suggest that the radiative recombination current dramatically increases but electron leakage from the quantum dots (QDs) to hole transport layer becomes more accessible during the warming-up process. Further analysis discloses that the notable enhancement of device efficiency can be ascribed to the filling of shell traps in gradient alloyed QDs. This work reveals a distinct positive aging phenomenon featured with reversibility, and further guidelines would be provided to achieve stable QLED devices in real display applications.

Sn-doped ZnO for efficient and stable quantum dot light-emitting diodes via a microchannel synthesis strategy

ZnO nanocrystals (NCs) are widely employed as an electron transport layer (ETL) in quantum-dot light-emitting diodes (QLEDs). However, the excessive electron mobility, abundant surface defects and poor reproducibility of ZnO NC synthesis are currently the primary restrictive factors influencing the development of QLEDs. In this study, we developed Sn(IV)-doped ZnO NCs as the ETL for constructing highly efficient and long lifetime QLEDs. The introduction of Sn can reduce the surface hydroxyl oxygen defects and alter the electron transport properties of NCs, and thus is beneficial for improving the efficiency of hole-electron recombination in the emitting layer. Meanwhile, a microchannel (MC) reactor is utilized to finely control the synthesis of Zn0.96Sn0.04O NCs, enabling us to achieve uniform size distribution and consistent production reproducibility. Using the Sn(IV)-doped ZnO NCs as the ETL has led to a remarkable enhancement of external quantum efficiency (EQE) for the fabricated red QLED, from 9.2% of the ZnO only device to 15.5% of the Zn0.96Sn0.04O device. Furthermore, the T70 (@1000 cd m-2) of the Zn0.96Sn0.04O device reached 78 h, which is 1.77-fold higher than that of the ZnO only device (44 h). The present work provides an alternative ETL for efficient and stable QLEDs.

Efficient Quantum Dot Light-Emitting Diode Enabled by a Thick Inorganic CdS Interfacial Modification Layer

Ultrathin (∼10 nm) insulating polymer films are commonly employed as an interfacial modification layer (IML) to improve charge balance and suppress interfacial exciton quenching in quantum dot light-emitting diodes (QLEDs). However, because the thickness is smaller than the energy transfer distance, interfacial exciton quenching is only partially suppressed, leading to the degrading of device performance. In this work, a thick (35 nm) inorganic CdS film is developed to serve as the IML of CdSe quantum-dot-based QLED. Benefiting from relatively low electron mobility and well-matched energy level, the CdS IML can effectively improve charge balance. In addition, because the thickness is larger than the energy transfer distance, interfacial exciton quenching can be completely blocked. As a result, the QLEDs with CdS IML exhibit a maximum EQE of 21.2% and a peak current efficiency of 24.2 cd A-1, which are about 1.32- and 1.4-fold higher than 16.1% and 17.3 cd A-1 of the devices without CdS IML, respectively. Our work offers an efficient method to completely block interfacial exciton quenching, which may open a new avenue for developing higher-performance QLEDs.

Thermal Management Enables Stable Perovskite Nanocrystal Light-Emitting Diodes with Novel Hole Transport Material

The severely insufficient operational lifetime of perovskite light-emitting diodes (LEDs) is incompatible with the rapidly increasing external quantum efficiency, even as it approaches the theoretical limit, thereby significantly impeding the commercialization of perovskite LEDs. In addition, Joule heating induces ion migration and surface defects, degrades the photoluminescence quantum yield and other optoelectronic properties of perovskite films, and induces the crystallization of charge transport layers with low glass transition temperatures, resulting in LED degradation under continuous operation. Here, a novel thermally crosslinked hole transport material, poly(FCA60 -co-BFCA20 -co-VFCA20 ) (poly-FBV), with temperature-dependent hole mobility is designed, which is advantageous for balancing the charge injection of the LEDs and limiting the generation of Joule heating. The optimised CsPbI3 perovskite nanocrystal LEDs with poly-FBV realise approximately a 2-fold external quantum efficiency increase over the LED with commercial hole transport layer poly(4-butyl-phenyl-diphenyl-amine) (poly-TPD), owing to the balanced carrier injection and suppressed exciton quenching. Moreover, because of the Joule heating control provided by the novel crosslinked hole transport material, the LED utilising crosslinked poly-FBV has a 150-fold longer operating lifetime (490 min) than that utilizing poly-TPD (3.3 min). The study opens a new avenue for the use of PNC LEDs in commercial semiconductor optoelectronic devices.

Luminescence and Degeneration Mechanism of Perovskite Light-Emitting Diodes and Strategies for Improving Device Performance

Perovskite light-emitting diodes (PeLEDs) can be a promising technology for next-generation display and lighting applications due to their excellent optoelectronic properties. However, a systematical overview of luminescence and degradation mechanism of perovskite materials and PeLEDs is lacking. Therefore, it is crucial to fully understand these mechanisms and further improve device performances. In this work, the fundamental photophysical processes of perovskite materials, electroluminescence mechanism of PeLEDs including carrier kinetics and efficiency roll-off as well as device degradation mechanism are discussed in detail. In addition, the strategies to improve device performances are summarized, including optimization of photoluminescence quantum yield, charge injection and recombination, and light outcoupling efficiency. It is hoped that this work can provide guidance for future development of PeLEDs and ultimately realize industrial applications.

Patterning Quantum Dots via Photolithography: A Review

Pixelating patterns of red, green, and blue quantum dots (QDs) is a critical challenge for realizing high-end displays with bright and vivid images for virtual, augmented, and mixed reality. Since QDs must be processed from a solution, their patterning process is completely different from the conventional techniques used in the organic light-emitting diode and liquid crystal display industries. Although innovative QD patterning technologies are being developed, photopatterning based on the light-induced chemical conversion of QD films is considered one of the most promising methods for forming micrometer-scale QD patterns that satisfy the precision and fidelity required for commercialization. Moreover, the practical impact will be significant as it directly exploits mature photolithography technologies and facilities that are widely available in the semiconductor industry. This article reviews recent progress in the effort to form QD patterns via photolithography. The review begins with a general description of the photolithography process. Subsequently, different types of photolithographical methods applicable to QD patterning are introduced, followed by recent achievements using these methods in forming high-resolution QD patterns. The paper also discusses prospects for future research directions.

Flexible Quantum Dot Light-Emitting Device for Emerging Multifunctional and Smart Applications

Quantum dot light-emitting diodes (QLEDs), owing to their exceptional performances in device efficiency, color purity/tunability in the visible region and solution-processing ability on various substrates, become a potential candidate for flexible and ultrathin electroluminescent (EL) lighting and display. Moreover, beyond the lighting and display, flexible QLEDs are enabled with endless possibilities in the era of the internet of things and artificial intelligence by acting as input/output ports in wearable integrated systems. Challenges remain in the development of flexible QLEDs with the goals for high performance, excellent flexibility/even stretchability, and emerging applications. In this paper, the recent developments of QLEDs including quantum dot materials, working mechanism, flexible/stretchable strategies and patterning strategies, and highlight its emerging multifunctional integrations and smart applications covering wearable optical medical devices, pressure-sensing EL devices, and neural smart EL devices, are reviewed. The remaining challenges are also summarized and an outlook on the future development of flexible QLEDs made. The review is expected to offer a systematic understanding and valuable inspiration for flexible QLEDs to simultaneously satisfy optoelectronic and flexible properties for emerging applications.

Review: Quantum Dot Light-Emitting Diodes

Quantum dot light-emitting diodes (QD-LEDs) are one of the most promising self-emissive displays in terms of light-emitting efficiency, wavelength tunability, and cost. Future applications using QD-LEDs can cover a range from a wide color gamut and large panel displays to augmented/virtual reality displays, wearable/flexible displays, automotive displays, and transparent displays, which demand extreme performance in terms of contrast ratio, viewing angle, response time, and power consumption. The efficiency and lifetime have been improved by tailoring the QD structures and optimizing the charge balance in charge transport layers, resulting in theoretical efficiency for unit devices. Currently, longevity and inkjet-printing fabrication of QD-LEDs are being tested for future commercialization. In this Review, we summarize significant progress in the development of QD-LEDs and describe their potential compared to other displays. Furthermore, the critical elements to determine the performance of QD-LEDs, such as emitters, hole/electron transport layers, and device structures, are discussed comprehensively, and the degradation mechanisms of the devices and the issues of the inkjet-printing process were also investigated.

Colloidal FAPbBr3 perovskite nanocrystals for light emission: what's going on?

Semiconducting nanomaterials have been widely explored in diverse optoelectronic applications. Colloidal lead halide perovskite nanocrystals (NCs) have recently been an excellent addition to the field of nanomaterials, promising an enticing building block in the field of light emission. In addition to the notable optoelectronic properties of perovskites, the colloidal NCs exhibit unique size-dependent optical properties due to the quantum size effect, which makes them highly attractive for light-emitting diodes (LEDs). In the past few years, perovskite-based LEDs (PeLEDs) have demonstrated a meteoritic rise in their external quantum efficiency (EQE) values, reaching over 20% so far. Among various halide perovskite compositions, FAPbBr3 and its variants remain one of the most interesting and sought-after compounds for green light emission. This review focuses on recent progress in the design and synthesis protocols of colloidal FAPbBr3 NCs and the emerging concepts in tailoring their surface chemistry. The structural and physicochemical features of lead halide perovskites along with a comprehensive discussion on their defect-tolerant properties are briefly outlined. Later, the prevalent synthesis, ligand, and compositional engineering strategies to boost the stability and photoluminescence quantum yield (PLQY) of FAPbBr3 NCs are extensively discussed. Finally, the fundamental concepts and recent progress on FAPbBr3-based LEDs, followed by a discussion of the challenges and prospects that are on the table for this enticing class of perovskites, are reviewed.

Molecular Design of Diazo Compound for Carbene-Mediated Cross-Linking of Hole-Transport Polymer in QLED with Reduced Energy Barrier and Improved Charge Balance

Polymeric hole-transport materials (HTMs) have been widely used in quantum-dot light-emitting diodes (QLEDs). However, their solution processability normally causes interlayer erosion and unstable film state, leading to undesired device performance. Besides, the imbalance of hole and electron transport in QLEDs also damages the device interfaces. In this study, we designed a bis-diazo compound, X1, as carbene cross-linker for polymeric HTM. Irradiated by ultraviolet and heating, a poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt(4,4'-(N-(4-butylphenyl))] (TFB)/X1 blend can achieve fast "electronically clean" cross-linking with ∼100% solvent resistance. The cross-linking reduced the stacking behaviors of TFB and thus led to a lower hole-transport mobility, whereas it was a good match of electron mobility. The carbene-mediated TFB cross-linking also downshifted the HOMO level from -5.3 to -5.5 eV, delivering a smaller hole-transport energy barrier. Benefiting from these, the cross-linked QLED showed enhanced device performances over the pristine device, with EQE, power efficiency, and current efficiency being elevated by nearly 20, 15, and 83%, respectively. To the best of our knowledge, this is the first report about a bis-diazo compound based carbene cross-linker built into a polymeric HTM for a QLED with enhanced device performance.

Van der Waals Epitaxy of Thin Gold Films on 2D Material Surfaces for Transparent Electrodes: All-Solution-Processed Quantum Dot Light-Emitting Diodes on Flexible Substrates

With the assistance of van der Waals (vdW) epitaxy, nanometer-thick and highly conductive gold films are deposited onto MoS₂ surfaces for use as transparent anode electrodes in quantum dot light-emitting diodes (QLEDs) on poly(ethylene terephthalate) (PET) substrates. After transferring wafer-scale and monolayer MoS₂ to PET substrates, 10 nm thick gold (Au) films are deposited onto the two-dimensional (2D) material surfaces as anode electrodes. Bounded only by weak vdW forces on 2D material surfaces, the diffusive Au adatoms tend to facilitate lateral growth and lead to the formation of continuous and highly conductive thin metal films in the nanometer regime. The Au film exhibits excellent tensile bending stability for its sheet resistance, which is superior to that of rigid indium-tin oxide (ITO) films on PET substrates. Thermally stable CdSe@CdZnS/ZnS QLEDs are fabricated on the PET substrate. Compared with devices fabricated on sapphire substrates, the phenomenon of sub-bandgap turn-on is observed for the flexible device. Based on our demonstrations, the high conductivity and robust durability toward substrate bending make the nanometer-thick Au film grown on 2D material surfaces a promising candidate to replace current ITO anode electrodes for flexible device applications.

Cadmium-Doped Zinc Sulfide Shell as a Hole Injection Springboard for Red, Green, and Blue Quantum Dot Light-Emitting Diodes

A new strategy is developed in which cadmium-doped zinc sulfide (CdZnS) is used as the outermost shell to synthesize red, green, and blue (RGB) quantum dots (QDs) with the core/shell structures of CdZnSe/ZnSe/ZnS/CdZnS, CdZnSe/ZnSe/ZnSeS/CdZnS, and CdZnSe/ZnSeS/ZnS/CdZnS, respectively. Firstly, the inner ZnS and ZnSe shells confine the excitons inside the cores of QDs and provide a better lattice matching with respect to the outermost shell, which ensures high photoluminescence quantum yields of QDs. Secondly, the CdZnS shell affords its QDs with shallow valence bands (VBs). Therefore, the CdZnS shell could be used as a springboard, which decreases the energy barrier for hole injection from polymers to QDs to be below 1.0 eV. It makes the holes to be easily injected into the QD EMLs and enables a balanced recombination of charge carriers in quantum dot light-emitting diodes (QLEDs). Thirdly, the RGB QLEDs made by these new QDs exhibit peak external quantum efficiencies (EQEs) of 20.2%, 19.2%, and 8.4%, respectively. In addition, the QLEDs exhibit unexpected luminance values at low applied voltages and therefore high power efficiencies. From these results, it is evident that CdZnS could act as an excellent shell and hole injection springboard to afford high performance QLEDs.

Enhancing the efficiency of solution-processed inverted quantum dot light-emitting diodes via ligand modification with 6-mercaptohexanol

In this Letter, the surface hydrophilicity of the quantum dot (QD) emitting layer (EML) was modified via a ligand exchange to prevent QD EML damage upon hole transport layer (HTL) deposition for all-solution-processed inverted QD-light-emitting diodes (QLEDs). The conventional hydrophobic oleic acid ligand (OA-QDs) was partially replaced with a hydrophilic 6-mercaptohexanol (OH-QDs) through a one-pot ligand exchange. Owing to this replacement, the contact angle of a water droplet on the OH-QD films was reduced to 71.7° from 89.5° on the OA-QD films, indicating the conversion to hydrophilic hydroxyl ligands. The OH-QD EML maintained its integrity without any noticeable damage, even after HTL deposition, enabling all-solution processing for inverted QLEDs with well-organized multilayers. Inverted QLEDs with the OH-QD EMLs were compared with those with OA-QD EMLs; the maximum current efficiency of the device with the OH-QD EML significantly improved to 39.0 cd A^-1 from 5.3 cd A^-1, and the peak external quantum efficiency improved to 9.3% from 1.2%, which is a seven-fold increase over the OA-QD device. This approach is believed to be effective for forming solid QD films with resistance to chlorobenzene, a representative HTL solvent, and consequently contributes to high-efficiency all-solution-processed inverted QLEDs.

Photocross-Linkable Hole Transport Materials for Inkjet-Printed High-Efficient Quantum Dot Light-Emitting Diodes

Efficient approach based on the photochemistry of benzophenone has been developed for the cross-linking of the polymer hole-transporting layer (HTL). The cross-linked poly[(9,9-dioctylfluorenyl-2,7-diyl)-alt-(4,4'-(N-(4-butylphenyl) (TFB) thin films showed high solvent stability, smooth surface morphology, and improved charge-carrier mobility. The solution-processed red, green, and blue (RGB) quantum dot light-emitting diodes (QLEDs) based on the cross-linked HTLs showed much better performances than the corresponding devices based on the pristine TFB HTLs. The spin-coated red QLEDs based on the cross-linked HTLs showed the maximum current efficiency (CE), the maximum power efficiency (PE), and the peak external quantum efficiency (EQE) of 32.3 cd A^-1, 42.3 lm W^-1, and 21.4%, respectively. The inkjet-printed red QLEDs with the cross-linked HTLs exhibited the CE, PE, and EQE of 26.5 cd A^-1, 37.8 lm W^-1, and 18.1%, respectively. The high-performance HTLs were obtained by significantly reducing the amount of cross-linking agents.

Polyethylenimine-ethoxylated dual interfacial layers for highly efficient and all-solution-processed inverted quantum dot light-emitting diodes

Inverted quantum dot light-emitting diodes (QLEDs) were fabricated through all-solution processing by sandwiching quantum dot (QD) emitting layers (EMLs) between dual polyethylenimine-ethoxylated (PEIE) layers. First, a PEIE layer as EML protecting layer (EPL) was formed on a QD EML to protect the EML from the hole transport layer (HTL) solvents and to facilitate the formation of a well-organized structure in the all-solution-processed inverted QLEDs. Second, another PEIE layer was introduced as an electron-blocking layer (EBL) on the zinc oxide (ZnO) electron transport layer (ETL) and effectively suppressed the excessive electron injection to the QD EML, thereby enhancing device efficiency.