0D/2D Heterojunctions of Ti3C2 MXene QDs/SiC as an Efficient and Robust Photocatalyst for Boosting the Visible Photocatalytic NO Pollutant Removal Ability

Dual-Shelled CeO2 Hollow Spheres Decorated with MXene Quantum Dots for Efficient Electrocatalytic Nitrogen Oxidation

Electrocatalytic nitrogen oxidation (NOR) provides a promising alternative strategy for synthesizing nitric acid from widespread N2, which overcomes the disadvantages of Haber-Bosch-Ostwald process. However, the NOR process suffers from the limitation of high N≡N bonding energy, sluggish kinetics, and low efficiency. It is prerequisite to develop more efficient NOR electrocatalysts. Herein, dual-shelled CeO2 hollow spheres (D-CeO2) are synthesized and modified with Ti3C2 MXene quantum dots (MQDs) for NOR, which exhibited a NO3 - yield rate of 71.25 µg h-1 mgcat -1 and Faradic Efficiency (FE) of 31.80% at 1.7 V versus RHE. The unique quantum size effect and abundant edge active sites lead to more effective capture of nitrogen. Moreover, the dual-shelled hollow structure will gather intermediate products in the interlayer of the core-shell to facilitate N2 fixation. The in situ Fourier transform infrared (FTIR) spectroscopy confirmed the formation of *NO and NO3 - species during the NOR, and the kinetics and possible pathways of NOR are calculated by density functional theory (DFT). In addition, a Zn-N2 reaction device is assembled with D-CeO2/MQDs as anode and Zn plate as cathode, obtaining an extremely high NO3 - yield rate of 104.57 µg h-1 mgcat -1 at 1 mA cm-2.

Enhancing resolution in DNA staining dye-based label-free visual fluorescence aptasensor: Strategy for eliminating non-specific binding-induced signal interference

By optimizing the quenching capabilities of diverse two-dimensional (2D) nanomaterials such as graphene oxide (GO), Ti3C2 MXene, and MoS2, we have pioneered a label-free fluorescence aptasensor with near-zero background signal, enabling highly sensitive detection of aflatoxin B1 (AFB1). This aptasensor was equipped with a newly synthesized dicationic fluorophore, VLM, which exhibited binding-induced turn-on fluorescence properties. Among the evaluated 2D nanosheets, MoS2 nanosheets were found to exhibit exceptional quenching efficiency for the background emission of the cDNA/VLM complex (cDNA was the complementary DNA of the aptamer), further enhancing the overall performance of our aptasensor. Upon exposure to AFB1, the aptamers underwent conformational switching and target binding, leading to the formation of aptamer/AFB1 complex. Additionally, the aptamers bound complementarily to cDNA, creating aptamer-cDNA duplexes that interacted with VLM, resulting in a robust fluorescence signal. Despite the presence of a weakly fluorescent cDNA/VLM background, this fluorescence could be effectively quenched by the addition of MoS2 nanosheets. Consequently, the label-free fluorescence aptasensor exhibited excellent linearity with AFB1 concentration within 2-3000 ng mL-1, achieving a limit of detection (LOD) of 0.006 ng mL-1. Remarkably, the visual fluorescence captured by a smartphone camera can be processed using extracted grayscale values, consistently revealing a linear relationship with the AFB1 concentration within 2-3000 ng mL-1, with a LOD of 0.197 ng mL-1. This aptasensor demonstrated exceptional sensitivity and a remarkably rapid sample-to-answer detection time of 74 min, showcasing its immense potential as a straightforward, sensitive, and visually intuitive method for rapid AFB1 detection with enhanced resolution.

Highly Active MXene Quantum Dots/CuSe n-p Plasmonic Heterostructures for Ultrafast Photocatalytic Removal of Cr(VI) under Full Solar Spectrum

Identifying effective plasmonic photocatalysts exhibiting robust activities across the entire solar spectrum poses a significant challenge. CuSe, with its local surface plasmon resonance (LSPR) effect, has garnered attention as a prospective plasmonic photocatalyst. However, severe charge recombination and insufficient light absorption limit its photocatalytic performance. To enhance the performance, constructing CuSe-based n-p plasmonic semiconductor heterostructures is a potential strategy. MXene quantum dots (MQDs), a kind of n-type plasmonic semiconductor with metallic conductivity and a high LSPR effect, are a promising candidate to couple with p-type CuSe. According to the complementary principle, we designed a 0D/2D MQDs/CuSe n-p plasmonic semiconductor, achieved by wrapping CuSe nanosheets with MQDs. This n-p plasmonic heterostructure exhibits a synergistic effect on an enhanced electronic field, facilitating charge transfer and separation, thereby enhancing charge excitation, carrier migration, and photothermal effect. Furthermore, optimizing the MQD loading content leads to an ultrafast photocatalytic reaction rate, achieving 100% Cr(VI) reduction efficiency within just 60 min with a reaction kinetics of 0.069 min-1, surpassing the performance of bare CuSe. Our work presents a promising approach for developing advanced n-p plasmonic heterostructures based on MQDs for wastewater treatment and other photocatalytic applications.

Heterointerface engineering of MXene: Advanced applications in environmental remediation

Contemporary global industrialization, coupled with the relentless growth of the population, has led to a persistent escalation in the emission and accumulation of various toxic and harmful chemicals in the environment, severely disrupting the ecological balance. The development of efficient environmental cleanup materials is a crucial scientific and technological concern. Since the groundbreaking work on Ti3C2Tx in 2011, there has been a huge growing interest in MXene-based composites developed through heterointerface engineering due to its high surface area, hydrophilicity, eco-friendliness, biocompatibility, easy functionalization, excellent thermal/mechanical properties, metal conductivity and rich electronic density. In the area of environmental remediation, MXene-based composites obtained through heterointerface engineering strategies have the ability to effectively remove and systematically monitor contaminants in comparison to virgin MXene, thanks to the synergistic effects and complementary benefits. Heterointerface engineering strategy increases specific surface area, introduces catalytic sites, constructs heterojunctions/Schottky junctions, and facilitates carrier migration and electron-hole separation. These novel MXene-based composites represent significant advances in MXene research and deserve a comprehensive review. Although several excellent reviews and perspectives on the application of MXene-based composites in environmental remediation have been published, there is still a scarcity of comprehensive and systematic assessments on the reliable data and mechanisms of various MXene-based composite materials for pollutant removal and monitoring. In this focused review, the first part briefly introduces the common preparation strategies and characterization methods of single MXene and MXene-based composites, and the second part details the innovative application of MXene-based composites (involving the amalgamation of MXene with metal oxides, metal sulfide, g-C3N4, layered double hydroxides, metal-organic frameworks, single atom/quantum dots, polymers, etc.) in the field of environmental remediation, including carbon dioxide reduction, nitrogen monoxide and volatile organic compounds removal, antibiotic and heavy metal ions degradation, summarizing the relevant performance and mechanisms. Furthermore, the recent advancements in the utilization of MXene-based composites for the sensing of emerging environmental contaminants (antibiotic and antibiotic resistance genes) are summarized. Finally, an outline of the existing challenges and future prospects on this exciting field was narrated for plausible real-world use. This review will help to inspire the diverse design of MXene-based composites and to advance research related to their application in the environmental sector.

Dendritic-like MXene quantum dots@CuNi as an efficient peroxidase candidate for colorimetric determination of glyphosate

Oxidized MXene quantum dots@CuNi bimetal (MQDs@CuNi) were firstly prepared through a simple hydrothermal method. Compared to the controlled samples, MQDs@CuNi1:1 showed the highest peroxidase-like activity. The catalytic mechanism of MQDs@CuNi1:1 was investigated using a steady-state fluorescence analysis, which showed that MQDs@CuNi1:1 efficiently decomposes H2O2 and produces highly reactive hydroxyl radicals (OH). Furthermore, theoretical calculations showed that the remarkable catalytic activity of MQDs@CuNi1:1 originates from the interaction between CuNi bimetal and MQDs to promote the activation and decomposition of H2O2, making it easier to combine with the hydrogen at the end of 3,3',5,5'-Tetramethylbenzidine (TMB). Accordingly, a sensitive colorimetric sensor is proposed to detect glyphosate (Glyp), displaying a low detection limit of 1.13 µM. The work will provide a new way for the development of high-performance nanozyme and demonstrate potential applicability for the determination of pesticide residues in environment.

Superhydrophilic Photothermal-Responsive CuO@MXene Nanofibrous Membrane with Inherent Biofouling Resistance for Treating Complex Oily Wastewater

MXene, a recently emerged 2D material, has garnered substantial attention for a myriad of applications. Despite the growing interest, there remains a noticeable gap in exploring MXene-based membranes for the simultaneous achievement of photomodulated oil/water separation, bacterial resistance, and the removal of pollutants in the treatment of oily wastewater. In this work, we have successfully synthesized a novel multifunctional CuO@MXene-PAN nanofibrous membrane (NFM) featuring unique nanograin-like structures. Benefitting from these unique structures, the resultant membrane shows excellent superwetting properties, significantly enhancing its performance in oil/water separation. In addition, the membrane's photothermal property boosts its permeance by 40% under visible light illumination within 30 min. Furthermore, the resultant membrane shows decent dye removal efficiency in an aqueous solution, e.g., Rhodamine B (RhB), promoting efficient degradation with high reusability under visible light. Most remarkably, the resultant membrane exhibits superior anti-biofouling capability and consistently resists the adhesion of microorganisms such as cyanobacteria over a 14 day period. Thus, the combined effect of superior superwetting properties, photothermal responsivity, photocatalytic activity, and the antibacterial effect in CuO@MXene-PAN NFM contributes to the efficient treatment of intricate oily wastewater. This synergistic combination of superior properties in the membrane could be an appealing strategy for the broad development of multifunctional materials to prevent fouling during actual separation performance.

Bismuth oxide modified V2C MXene as a Schottky catalyst with enhanced photocatalytic oxidation for photo-denitration activities

In this work, a new composite photocatalyst was synthesized by flower-like Bi2O3 and two-dimensional multilayer V2C using a facile hydrothermal method. Compared with the pristine sample, the specific surface area of Bi2O3/V2C MXene composite is significantly increased, which is favourable to improve the photocatalytic efficiency. The analysis of the UV-vis absorption spectrum and band gap energy shows that the construction of heterojunction broadens the light response range, improves the light absorption capacity, and obtains a narrower band gap than any of the single component, which is beneficial to the utilization of light. PL, TPC and EIS analysis revealed that Bi2O3/V2C MXene composite had stronger carrier mobility, which further confirmed that the photocatalytic oxidation performance of the system was the dominant reason in the photocatalytic NO pollutant removal process. This study provides a new idea for better understanding the two-dimensional MXene material-based photocatalyst and improving the NO removal efficiency.

Biomass carbon and Ti2C3MXene quantum dots as ratiometric fluorescent probes for sensitive detecting malachite green in fish sample

A visual detection method for malachite green (MG) in food was established based on 'double-response-OFF' ratiometric fluorescent paper-based sensor. Biomass carbon quantum dots (BCQDs) using broad bean shell, and Ti3C2MXene quantum (MQDs) dots modified by ethylenediamine were synthesized by solvothermal method. The MG and two kinds of quantum dots could undergo static quenching, and the fluorescence color of two kinds of quantum dots gradually changed from red to blue, eventually the fluorescence was quenched, and the pattern had a two-stage linear relationship using fluorescent spectrofluorometer in the range of 0.1-140.0μM and the detection limit of 0.07μM. On this basis, a BCQDs/MQDs ratiometric fluorescence paper-based sensor was constructed and applied to fish sample. Through mobile phone software-Color recognizer, RGB values of fluorescent paper-based sensor at various concentrations of MG were extracted. The results showed that MG concentration was linearly correlated withR' value of RGB in the range of 20.0-140.0μM with 16.5μM detection limit. The method had been applied to the determination of canned fish and fresh basa fish samples, and the recovery rates were 97.33%-108.93% and 96.04%-117.97%, respectively. It proved that the ratiometric fluorescent paper-based sensor could be used for the rapid visual quantitative detecting MG in real samples.

Recent advances and promise of MXene-based composites as electrode materials for sodium-ion and potassium-ion batteries

With the increasing demand for sustainable energy and concerns about the scarcity of lithium resources, sodium and potassium ion batteries have emerged as promising alternative energy storage technologies. MXene, as a novel two-dimensional material, possesses exceptional electrical conductivity, high surface area, and tunable structural features that make it an ideal candidate for high-performance electrode materials. However, its limited theoretical capacity hinders its widespread application. To overcome this limitation, MXene has been combined with other materials through synergistic effects between different components to enhance the overall electrochemical performance and expand its application in sodium/potassium ion batteries. Recently, substantial advancements have been realized in the exploration of MXene-based composites as energy storage materials, encompassing their synthesis, design, and the comprehension of charge storage mechanisms. This paper aims to propose a comprehensive summary of the latest developments in MXene-based composites as electrode materials for sodium ion batteries and potassium ion batteries, with a particular emphasis on the enhanced physicochemical properties resulting from composite formation. Moreover, the challenges faced by MXene materials in sodium ion batteries and potassium ion batteries are thoroughly discussed, and future research directions to further advance this field are proposed.

Exposing high-activity (111) facet CoO octahedral loading MXene quantum dots for efficient and stable photocatalytic H2 evolution

Photocatalytic splitting of water for hydrogen generation is a green and renewable solution for converting solar energy to chemical energy; thus, the development of high-performance and stable photocatalytic materials has emerged as a research hotspot recently. Herein, a heterostructure composite photocatalyst of octahedral CoO uniformly modified with novel nitrogen-doped MXene quantum dots (N-MQDs) is successfully designed using a typical solvothermal approach. The optimum photocatalytic hydrogen evolution efficiency of the prepared N-MQDs@CoO heterojunction composite is 82.54 μmol g-1 h-1 with visible light, which is 16.57 times higher compared to the pure CoO. A series of photoelectrochemical tests were further performed to elucidate the photocatalytic hydrogen evolution mechanism. The remarkable improvement of activity is primarily attributed to the synergistic interaction between the closely spaced interface contacts and energy level matching among high conductivity Ti3C2 MXene quantum dots with CoO octahedra, dramatically hastening the segregation and transfer of photo-generated carriers. This study provides new ideas for the construction of MXene quantum dot-based co-photocatalysts with highly efficient photocatalytic performance and stability toward solar energy conversion applications.

Simultaneous electrochemical detection of dimethyl bisphenol A and bisphenol A using a novel Pt@SWCNTs-MXene-rGO modified screen-printed sensor

Since bisphenol A (BPA) and dimethyl bisphenol A (DM-BPA) are human endocrine disruptors (EDCs) with tiny potential differences (44 mV) and widespread applications, there is a lack of published reports on their simultaneous detection. Therefore, this study reports a novel electrochemical detection system capable of simultaneous direct detection of BPA and DM-BPA using screen-printed carbon electrodes (SPCE) as a sensing platform. To improve the electrochemical performance of the SPCE, the SPCE was modified by using a combination of Pt nanoparticles modified with single-walled carbon nanotubes (Pt@SWCNTs), MXene (Ti₃C₂), and graphene oxide (GO). In addition, the GO in Pt@SWCNTs-MXene-GO was reduced to reduced graphene oxide (rGO) by the action of electric field (-1.2 V), which significantly improved the electrochemical properties of the composites and effectively solved the problem of dispersion of the modified materials on the electrode surface. Under optimal experimental conditions, Pt@SWCNTs-Ti₃C₂-rGO/SPCE exhibited a suitable detection range (0.006-7.4 μmol L^-1) and low detection limits (2.8 and 3 nmol L^-1, S/N = 3) for the simultaneous detection of BPA (0.392 V vs. Ag/AgCl) and DM-BPA (0.436 V vs. Ag/AgCl)). Thus, this study provides new insights into detecting compounds with similar structures and slight potential differences. Finally, the developed sensor's reproducibility, stability, interference resistance and accuracy were demonstrated with satisfactory results.

Surface Modification of TiO2 by Hyper-Cross-Linked Polymers for Efficient Visible-Light-Driven Photocatalytic NO Oxidation

Solar-driven photocatalysis offers an environmentally friendly and sustainable approach for the removal of air pollutants such as nitric oxides without chemical addition. However, the low specific surface area and adsorption capacity of common photocatalysts restrict the surface reactions with NO at the ppb-level. In this study, imidazolium-based hyper-cross-linked polymer (IHP) was introduced to modify the surface of TiO₂ to construct a porous TiO₂/IHP composite photocatalyst. The as-prepared composite with hierarchical porous structure achieves a larger specific surface area as 309 m²/g than that of TiO₂ (119 m²/g). Meanwhile, the wide light absorption range of the polymer has brought about the strong visible-light absorption of the TiO₂/IHP composite. In consequence, the composite photocatalyst exhibits excellent performance toward NO oxidation at a low concentration of 600 ppb under visible-light irradiation, reaching a removal efficiency of 51.7%, while the generation of the toxic NO₂ intermediate was suppressed to less than 1 ppb. The enhanced NO adsorption and the suppressed NO₂ generation on the TiO₂/IHP surface were confirmed by in situ monitoring technology. This work demonstrates that the construction of a porous structure is an effective approach for efficient NO adsorption and photocatalytic oxidation.

Recent Progress in Screening of Mycotoxins in Foods and Other Commodities Using MXenes-Based Nanomaterials

Mycotoxin pollution in agricultural food products endangers animal and human health during the supply chains, therefore the development of accurate and rapid techniques for the determination of mycotoxins is of great importance for food safety guarantee. MXenes-based nanoprobes have attracted enormous attention as a complementary analysis and promising alternative strategies to conventional diagnostic methods, because of their fascinating features, like high electrical conductivity, various surface functional groups, high surface area, superb thermal resistance, good hydrophilicity, and environmentally-friendlier characteristics. In this study, we outline the state-of-the-art research on MXenes-based probes in detecting various mycotoxins like aflatoxin, ochratoxin, deoxynivalenol, zearalenone, and other toxins as a most commonly founded mycotoxin in the agri-food supply chain. First, we present the diverse synthesis approaches and exceptional characteristics of MXenes. Afterward, based on the detecting mechanism, we divide the biosensing utilizations of MXenes into two subcategories: electrochemical, and optical biosensors. Then their performance in effective sensing of mycotoxins is comprehensively deliberated. Finally, present challenges and prospective opportunities for MXenes are debated.

The Photocatalytic Activity of CaTiO3 Derived from the Microwave-Melting Heating Process of Blast Furnace Slag

The extraction of titanium-bearing components in the form of CaTiO₃ is an efficient utilization of blast furnace slag. The photocatalytic performance of this obtained CaTiO₃ (MM-CaTiO₃) as a catalyst for methylene blue (MB) degradation was evaluated in this study. The analyses indicated that the MM-CaTiO₃ had a completed structure with a special length-diameter ratio. Furthermore, the oxygen vacancy was easier to generate on a MM-CaTiO₃(110) plane during the photocatalytic process, contributing to improving photocatalytic activity. Compared with traditional catalysts, MM-CaTiO₃ has a narrower optical band gap and visible-light responsive performance. The degradation experiments further confirmed that the photocatalytic degradation efficiency of pollutants by using MM-CaTiO₃ was 3.2 times that of pristine CaTiO₃ in optimized conditions. Combined with molecular simulation, the degradation mechanism clarified that acridine of MB molecular was stepwise destroyed by using MM-CaTiO₃ in short times, which is different from demethylation and methylenedioxy ring degradation by using TiO₂. This study provided a promising routine for using solid waste to obtain catalysts with excellent photocatalytic activity and was found to be in keeping with sustainable environmental development.

A novel fluorescent nanoprobe based on potassium permanganate-functionalized Ti3C2 QDs for the unique "turn-on" dual detection of Cr3+ and Hg2+ ions

Titanium carbide quantum dots (Ti₃C₂ QDs) were synthesized by ammonia-assisted hydrothermal method. We also synthesized potassium permanganate (KMnO₄)-functionalized Ti₃C₂ QDs (Mn-QDs) by modifying Ti₃C₂ nanosheets with KMnO₄ and then cutting the functional nanosheets into Mn-QDs. The Ti₃C₂ QDs and Mn-QDs were characterized by fluorescence spectroscopy (FL), Fourier transform infrared spectroscopy (FTIR), UV-vis spectrophotometry (UV-vis), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Furthermore, the modified Mn-QDs have strong luminescence ability and good dispersion stability, which can be used for Cr³⁺ and Hg²⁺ double ion detection with enhanced fluorescence specificity. Cr³⁺/Hg²⁺ and negatively charged Mn-QDs are bound together by electrostatic interactions. Meanwhile, the surface of Mn-QDs is rich in functional groups, which interacts with Cr³⁺/Hg²⁺ to modify the surface traps, leading to defect passivation and exhibiting photoluminescence enhancement. For the dynamic quenching produced by the interaction of Mn-QDs with Hg²⁺ within 50 μM, it may be caused by the complex formation of Hg²⁺ trapped by the amino group on the surface of Mn-QDs. The detection limits for Cr³⁺ and Hg²⁺ were 0.80 μM and 0.16 μM, respectively. The recoveries of Cr³⁺ and Hg²⁺ ions in real water samples were 93.79-105.10% and 93.91-102.05%, respectively, by standard addition recovery test. In this work, the application of Mn-QDs in Cr³⁺ and Hg²⁺ ion detection was researched, which opens a new way for its application in the field of detecting heavy metal ions.

The enhanced photocatalytic and photothermal effects of Ti3C2 Mxene quantum dot/macroscopic porous graphitic carbon nitride heterojunction for Hydrogen Production

A new heterostructure between Ti₃C₂ MXene quantum dot and 3D macroscopic porous graphitic carbon nitride (PGCN) was successfully obtained by integrating Ti₃C₂ quantum dots onto porous graphitized carbon nitride (Ti₃C₂QDs/PGCN) using in situ electrostatic self-assembly techniques. The photocatalytic H₂ evolution rate of optimized 5.5 wt% Ti₃C₂ QD/PGCN composites is nearly 15.24 and 3.53 times higher than pristine CN, and PGCN, respectively. Ti₃C₂ quantum dots can significantly enhance the hydrogen production activity of PGCN. In addition, their good photothermal conversion ability accelerates the overall reaction process and enhances the light absorption and carrier density. Furthermore, to elucidate the photocatalytic mechanism, a series of tests involving electron spin resonance (ESR) and density functional theory (DFT) calculations were performed. The results confirmed that the Schottky barrier between PGCN and Ti₃C₂ QD can effectively promote spatial charge separation and significantly improve the photocatalytic performance. This work provides a new approach for the construction of photocatalytic systems and the application of MXene QD.

Cholesterol oxidase-immobilized MXene/sodium alginate/silica@n-docosane hierarchical microcapsules for ultrasensitive electrochemical biosensing detection of cholesterol

Electrochemical biosensors usually suffer from the deterioration of detection sensitivity and determination accuracy in a high-temperature environment due to protein denaturation and inactivation of their biological recognition elements such as enzymes. Focusing on an effective solution to this crucial issue, we have developed cholesterol oxidase-immobilized MXene/sodium alginate/silica@n-docosane hierarchical microcapsules as a thermoregulatory electrode material for electrochemical biosensors to meet the requirement of ultrasensitive detection of cholesterol at high temperature. The microcapsules were first fabricated by microencapsulating n-docosane as a phase change material (PCM) in a silica shell, followed by depositing a biocompatible sodium alginate layer, wrapping with electroactive MXene nanosheets and then immobilizing cholesterol oxidase as a biological recognition element for electrochemical biosensing. The fabricated composites not only exhibited a layer-by-layer hierarchical microstructure with the desired chemical and biological components, but also obtained a high latent-heat capacity of over 133 J g^-1 for thermal management through reversible phase transitions of its PCM core. A bare glassy carbon electrode was modified with the developed composites to serve for the cholesterol biosensor. This enables the modified electrode to obtain an in situ thermoregulatory ability to regulate the microenvironmental temperature surrounding the electrode, effectively preventing the protein denaturation of cholesterol oxidase and minimizing heat impact on biosensing performance. Compared to conventional cholesterol biosensors without a PCM, the developed biosensor achieved a higher sensitivity of 4.63 μA μM^-1 cm^-2 and a lower limit of detection of 0.081 μM at high temperature, providing highly accurate and reliable detection of cholesterol for real biological samples over a wide temperature range.

Hybrid Nanomat: Copolymer Template CdSe Quantum Dots In Situ Stabilized and Immobilized within Nanofiber Matrix

Fabrication and characterization of hybrid nanomats containing quantum dots can play a prominent role in the development of advanced biosensors and bio-based semiconductors. Owing to their size-dependent properties and controlled nanostructures, quantum dots (QDs) exhibit distinct optical and electronic characteristics. However, QDs include heavy metals and often require stabilizing agents which are toxic for biological applications. Here, to mitigate the use of toxic ligands, cadmium selenide quantum dots (CdSe QDs) were synthesized in situ with polyvinylpyrrolidone (PVP) at room temperature. The addition of PVP polymer provided size regulation, stability, and control over size distribution of CdSe QDs. The characterization of the optical properties of the CdSe QDs was performed using fluorescence and ultraviolet-visible (UV-Vis) spectroscopy. CdSe QDs exhibited a typical absorbance peak at 280 nm and a photoluminescence emission peak at 580 nm. Transmission electron microscopy (TEM) micrographs demonstrated that CdSe QDs having an average size of 6 ± 4 nm were obtained via wet chemistry method. CdSe QDs were immobilized in a blend of PVP and poly(L-lactide-co-ε-caprolactone) (PL-b-CL) copolymer that was electrospun to produce nanofibers. Scanning electron microscopy (SEM), thermal analyses and attenuated total reflectance Fourier-transform infrared spectroscopy (ATR-FTIR) were used to characterize properties of fabricated nanofibers. Both pristine and hybrid nanofibers possessed cylindrical geometry and rough surface features, facilitating increased surface area. Infrared absorption spectra showed a slight shift in absorbance peaks due to interaction of PVP-coated CdSe QDs and nanofiber matrix. The presence of CdSe QDs influenced the fiber diameter and their thermal stability. Further, in vitro biological analyses of hybrid nanofibers showed promising antibacterial effect and decline in cancer cell viability. This study offers a simple approach to obtain hybrid nanomats immobilized with size-controlled PVP-coated CdSe QDs, which have potential applications as biosensors and antibacterial and anticancer cell agents.

Boosting the Photocatalytic Ability of TiO2 Nanosheet Arrays for MicroRNA-155 Photoelectrochemical Biosensing by Titanium Carbide MXene Quantum Dots

The electrodes of two-dimensional (2D) titanium dioxide (TiO₂) nanosheet arrays were successfully fabricated for microRNA-155 detection. The (001) highly active crystal face was exposed to catalyze signaling molecules ascorbic acid (AA). Zero-dimensional (0D) titanium carbide quantum dots (Ti₃C₂T_x QDs) were modified to the electrode as co-catalysts and reduced the recombination rate of the charge carriers. Spectroscopic methods were used to determine the band structure of TiO₂ and Ti₃C₂T_x QDs, showing that a type Ⅱ heterojunction was built between TiO₂ and Ti₃C₂T_x QDs. Benefiting the advantages of materials, the sensing platform achieved excellent detection performance with a wide liner range, from 0.1 pM to 10 nM, and a low limit of detection of 25 fM (S/N = 3).

Dual-quantum-dots heterostructure with confined active interface for promoted photocatalytic NO abatement

Constructing heterostructure is an effective way to fabricate advanced photocatalysts. However, the catalytic performance of typical common multi-dimensional bulk heterostructure still suffers from the limited active interface and inefficient carrier migration. Herein, we successfully synthesize the SnO₂/Cs₃Bi₂I₉ dual-quantum-dots nanoheterostructure (labeled as SCX, X = 1, 2, 3) for efficiently and stably photocatalytic NO removal under visible light irradiation. The NO removal rate of SC2 is almost 8 and 17 times higher than that of the single SnO₂ and Cs₃Bi₂I₉, respectively. Moreover, the SC2 photocatalyst shows only 3 % attenuation after five consecutive cycles, demonstrating good photocatalytic stability. Systematic experimental characterization and theoretical density functional theory calculations revealed that the high activity and stability of SCX originated from the efficient charge transfer at the confined interface between SnO₂ and Cs₃Bi₂I₉ quantum dots. This work provides a new perspective for constructing innovative dual-quantum-dots nanoheterostructure and assesses their potential in photocatalytic environmental applications.

Quantum Dots Compete at the Acme of MXene Family for the Optimal Catalysis

It is well known that two-dimensional (2D) MXene-derived quantum dots (MQDs) inherit the excellent physicochemical properties of the parental MXenes, as a Chinese proverb says, "Indigo blue is extracted from the indigo plant, but is bluer than the plant it comes from." Therefore, 0D QDs harvest larger surface-to-volume ratio, outstanding optical properties, and vigorous quantum confinement effect. Currently, MQDs trigger enormous research enthusiasm as an emerging star of functional materials applied to physics, chemistry, biology, energy conversion, and storage. Since the surface properties of small-sized MQDs include the type of surface functional groups, the functionalized surface directly determines their performance. As the Nobel Laureate Wolfgang Pauli says, "God made the bulk, but the surface was invented by the devil," and it is just on the basis of the abundant surface functional groups, there is lots of space to be thereof excavated from MQDs. We are witnessing such excellence and even more promising to be expected. Nowadays, MQDs have been widely applied to catalysis, whereas the related reviews are rarely reported. Herein, we provide a state-of-the-art overview of MQDs in catalysis over the past five years, ranging from the origin and development of MQDs, synthetic routes of MQDs, and functionalized MQDs to advanced characterization techniques. To explore the diversity of catalytic application and perspectives of MQDs, our review will stimulate more efforts toward the synthesis of optimal MQDs and thereof designing high-performance MQDs-based catalysts.

Ti3 C2 TX MXene Modified with ZnTCPP with Bacteria Capturing Capability and Enhanced Visible Light Photocatalytic Antibacterial Activity

Light-assisted antibacterial therapy is a promising alternative to antibiotic therapy due to the high antibacterial efficacy without bacterial resistance. Recent research has mainly focused on the use of near-infrared light irradiation to kill bacteria by taking advantage of the synergistic effects rendered by hyperthermia and radical oxygen species. However, photocatalytic antibacterial therapy excited by visible light is more convenient and practical, especially for wounds. Herein, a visible light responsive organic-inorganic hybrid of ZnTCPP/Ti₃ C₂ T_X is designed and fabricated to treat bacterial infection with antibacterial efficiency of 99.86% and 99.92% within 10 min against Staphylococcus aureus and Escherichia coli, respectively. The porphyrin-metal complex, ZnTCPP, is assembled on the surface of Ti₃ C₂ T_X MXene to capture bacteria electrostatically and the Schottky junction formed between Ti₃ C₂ T_X and ZnTCPP promotes visible light utilization, accelerates charge separation, and enhances the mobility of photogenerated charges, and finally increases the photocatalytic activity. As a result of the excellent bacteria capturing ability and photocatalytic antibacterial effects, ZnTCPP/Ti₃ C₂ T_X exposed to visible light has excellent antibacterial properties in vitro and in vivo. Therefore, organic-inorganic materials that have been demonstrated to possess good biocompatibility and enhance wound healing have large potential in bio-photocatalysis, antibacterial therapy, as well as antibiotics-free treatment of wounds.

Self-powered Aptasensors Made with the In2O3-In2S3-Ti3C2 Composite for Dual-mode Detection of Microcystin-LR

A dual-mode self-powered aptasensing platform of photoelectrochemical (PEC) and photofuel cell (PFC) was constructed for Microcystin-LR (MC-LR) detection. Specifically, the In₂O₃-In₂S₃-Ti₃C₂ (IO-IS-TC) composite was facilely assembled on the base of MOF-derived In₂O₃ hollow tubulars, and the integrated mechanism and photoconversion efficiency are proposed and discussed in detail. Herein, a promising dual-mode sensing platform was constructed using the IO-IS-TC composite as a photoanode matrix with higher output power and obvious photocurrent response. Moreover, the dual-mode sensing platform did not require external bias and the addition of sacrificial agents under visible light irradiation. The enhanced PEC properties can be attributed to the matched energy level of ternary components and the improved separation of photogenerated carriers. Moreover, aptamer-based recognition was adopted to catch MC-LR molecules, which realized the highly sensitive and selective detection. The PFC aptasensor was exhibited at 50-5 × 10⁵ pmol/L with a detection limit of 17.4 pmol/L, and the PEC aptasensor was realized from 0.5 to 4 × 10⁵ pmol/L with a detection limit of 0.169 pmol/L. The proposed aptasensing platform showed good specificity, reproducibility, and stability, which paved the way for the construction of a fast and ultrasensitive PEC sensing methodology for environmental analysis.

Eu doped Ti3C2 quantum dots to form a ratiometric fluorescence platform for visual and quantitative point-of-care testing of tetracycline derivatives

Antibiotic residues have become a public health issues, the fast detection of tetracycline (Tc) in the environment is urgently required. In this work, Ti₃C₂ quantum dots (Ti₃C₂ QDs) and Europium ions jointly constructed a ratiometric fluorescence (FL) platform for the detection of Tc, based on synergistic impact of the Foster Resonance Energy Transfer (FRET) from Ti₃C₂ QDs to Eu³⁺ ions and the Antenna Effect (AE) between Tc and Eu³⁺ ions. And we proposed a ratiometric FL platform for detecting Tc with good linear response range (100-1000 uM) and low detection limit (48.79 nM). Meanwhile, we applied this platform to detect a serious of β-diketone ligands of Eu³⁺ ions, demonstrating the platform's versatility for this category of chemical. Furthermore, based on the color changes of QDs@Eu³⁺ from blue to red at 365 nm ultraviolet light, an intelligent detection smart device was built for the visual semi-quantitative detection of Tc in actual samples. We proved the applicability of the device in complicated samples and the potential for rapid, sensitive, intuitive and point-of-care detection in the field of environment, food, pharmaceutical and agriculture.

MXenes based nano-heterojunctions and composites for advanced photocatalytic environmental detoxification and energy conversion: A review

Extensive research is being done to develop multifunctional advanced new materials for high performance photocatalytic applications in the field of energy production and environmental detoxification, MXenes have emerged as promising materials for enhancing photocatalytic performance owing to their excellent mechanical properties, appropriate Fermi levels, and adjustability of chemical composition. Numerous experimental and theoretical research works implied that the dimensions of MXenes have a significant impact on their performance. For photocatalysis to thrive in the future, we must understand the current state of the art for MXene in different dimensions. Using MXene co-catalysts in widely used in photocatalytic applications such as CO2 reduction, hydrogen production and organic pollutant oxidation, this study focuses on the most recent developments in MXenes based materials, structural modifications, innovations in reaction and material engineering. It has been reported that using 5 mg of CdS-MoS2-MXene researchers were able to generate as high as 9679 μmol/g/h hydrogen under visible light. The MXenes based heterojunction photocatalyst Co3O4/MXene was utilized to degrade 95% bisphenol A micro-pollutant in just 7 min. Numerous novel materials, their preparations and performances have been discussed. Depending upon the nature of MXene-based materials, the synthesis techniques and photocatalytic mechanism of MXenes as co-catalyst are also summarized. Finally, some final thoughts and prospects for developing highly efficient MXene-based photocatalysts are provided which will indeed motivate researchers to design novel hybrid materials based on MXenes for sustainable solutions to energy and pollution issues.

Recent progress of heterostructures based on two dimensional materials and wide bandgap semiconductors

Recent progress in the synthesis and assembly of two-dimensional (2D) materials has laid the foundation for various applications of atomically thin layer films. These 2D materials possess rich and diverse properties such as layer-dependent band gaps, interesting spin degrees of freedom, and variable crystal structures. They exhibit broad application prospects in micro-nano devices. In the meantime, the wide bandgap semiconductors (WBS) with an elevated breakdown voltage, high mobility, and high thermal conductivity have shown important applications in high-frequency microwave devices, high-temperature and high-power electronic devices. Beyond the study on single 2D materials or WBS materials, the multi-functional 2D/WBS heterostructures can promote the carrier transport at the interface, potentially providing novel physical phenomena and applications, and improving the performance of electronic and optoelectronic devices. In this review, we overview the advantages of the heterostructures of 2D materials and WBS materials, and introduce the construction methods of 2D/WBS heterostructures. Then, we present the diversity and recent progress in the applications of 2D/WBS heterostructures, including photodetectors, photocatalysis, sensors, and energy related devices. Finally, we put forward the current challenges of 2D/WBS heterostructures and propose the promising research directions in the future.

Spinning disc photoreactor based visible-light-driven Ag/Ag2O/TiO2 heterojunction photocatalyst film toward the degradation of amoxicillin

The presence of antibiotics in waste and drinking water is causing increasing concern around the world, thereby an advanced sustainable technology needs to be developed to eliminate the antibiotics from water resources. Hence, an efficient spinning disc photoreactor (SDPR) equipped with visible light-activated Ag/Ag₂O/TiO₂ heterostructure thin film photocatalyst was assessed for the degradation of amoxicillin (AMX) as a typical antibiotic. The surface morphology, optoelectronic and structural features of Ag/Ag₂O/TiO₂ heterojunction were characterized by TEM, BET, mott Schottky, FESEM, EDS, AFM, XRD, UV-Vis-DRS, and contact angle measurements. Results confirm that Ag and Ag₂O have a significant effect on the photocharge carrier separation and transfer of the as-developed photocatalyst system. The operative variables including illumination time, rotational speed, solution flow rate, aeration rate, pH, and initial AMX concentration were optimized by CCD. The results displayed the maximum AMX photodegradation (97.91%) could be achieved at optimal conditions involving illumination time of 80 min, a rotational speed of 225 rpm, the solution flow rate of 0.6 L/min, aeration rate of 20 L/min, pH = 6, and initial AMX concentration of 20 mg/L. Interestingly, more than 79% COD and 64% TOC were removed under optimum conditions during 80 min illumination time, respectively. Active species tests confirmed the dominant role of ·OH and ·O₂^- in AMX degradation. finally, the XRD pattern confirmed that the reusability assessments of the heterojunction film could successfully retain its stability for six consecutive photocatalytic degradation runs. This work demonstrates the feasibility of utilizing visible-light-driven thin-film photocatalysts in spinning disc photoreactors in treating the tenacious antibiotic pollutants.

Visible-light-driven photocatalytic N2 fixation to nitrates by 2D/2D ultrathin BiVO4 nanosheet/rGO nanocomposites

Photocatalytic nitrogen fixation is a promising approach owing to its environmental friendliness and cost-effectiveness. The 2D/2D BiVO₄/rGO hybrid developed in this study exhibits a high nitrate-production rate of 1.45 mg h^-1 g^-1 and an apparent quantum efficiency (QE) of 0.64% at 420 nm, which represents one of the most highly active photocatalysts reported thus far.

Unleashing non-conjugated polymers as charge relay mediators

The core factors affecting the efficiency of photocatalysis are predominantly centered on controllable modulation of anisotropic spatial charge separation/transfer and regulating vectorial charge transport pathways in photoredox catalysis, yet it still meets with limited success. Herein, we first conceptually demonstrate the rational design of unidirectional cascade charge transfer channels over transition metal chalcogenide nanosheets (TMC NSs: ZnIn2S4, CdS, CdIn2S4, and In2S3), which is synergistically enabled by a solid-state non-conjugated polymer, i.e., poly(diallyldimethyl ammonium chloride) (PDDA), and MXene quantum dots (MQDs). In such elaborately designed photosystems, an ultrathin PDDA layer functions as an intermediate charge transport mediator to relay the directional electron transfer from TMC NSs to MQDs that serve as the ultimate electron traps, resulting in a considerably boosted charge separation/migration efficiency. The suitable energy level alignment between TMC NSs and MQDs, concurrent electron-withdrawing capabilities of the ultrathin PDDA interim layer and MQDs, and the charge transport cascade endow the self-assembled TMC/PDDA/MQD heterostructured photosystems with conspicuously improved photoactivities toward anaerobic selective reduction of nitroaromatics to amino derivatives and photocatalytic hydrogen evolution under visible light irradiation. Furthermore, we ascertain that this concept of constructing a charge transfer cascade in such TMC-insulating polymer-MQD photosystems is universal. Our work would afford novel insights into smart design of spatial vectorial charge transport pathways by precise interface modulation via non-conjugated polymers for solar energy conversion.

Anchoring 1D nanochain-like Co3O4 on a 2D layered Ti3C2Tx MXene with outstanding electromagnetic absorption

3D superstructure Ti3C2Tx/Co3O4 nanochain composites were synthesized through electrostatic self-assembly, in which 1D Co3O4 nanochains were anchored on a 2D layered Ti3C2Tx surface.

Rational design of n-Bi12TiO20@p-BiOI core-shell heterojunction for boosting photocatalytic NO removal

Bismuth titanate (Bi₁₂TiO₂₀) with unique sillenite structure has been shown to be an excellent photocatalyst for environmental remediation. However, the narrow light-responsive range and rapid recombination of photoinduced electrons-holes limit the photocatalytic performance of Bi₁₂TiO₂₀. To overcome the limitations, a practical and feasibleway is to fabricate heterojunctions by combining Bi₁₂TiO₂₀ with suitable photocatalysts. Here, using a facile chemical precipitation method, a novel and hierarchical core-shell structure of n-Bi₁₂TiO₂₀@p-BiOI (BTO@BiOI) heterojunction was rationally designed and synthesized by loading BiOI nanosheets on BTO nanofibers. The constructed BTO@BiOI composites exhibited significant charge transfer ability due to the synergistic effects of the built-in electric field between BTO and BiOI as well as close interfacial contacts. In addition, the narrow bandgapcharacteristics of the BiOI led to wide light absorption ranges. Therefore, the BTO@BiOI heterojunction exhibited an improved photocatalytic performance under visible light irradiation. The NO removal efficiency of optimal BTO@BiOI was 45.7%, which was significantly higher compared tothat of pure BTO (3.6%) or BiOI (23.1%). Moreover, the cycling experiment revealed that BTO@BiOI composite has a good stability and reusability. The possible mechanism of photocatalytic NO oxidation over BTO@BiOI was investigated in detail.

Acoustomicrofluidic Synthesis of Pristine Ultrathin Ti3C2Tz MXene Nanosheets and Quantum Dots

The conversion of layered transition metal carbides and/or nitrides (MXenes) into zero-dimensional structures with thicknesses and lateral dimensions of a few nanometers allows these recently discovered materials with exceptional electronic properties to exploit the additional benefits of quantum confinement, edge effects, and large surface area. Conventional methods for the conversion of MXene nanosheets and quantum dots, however, involve extreme conditions such as high temperatures and/or harsh chemicals that, among other disadvantages, lead to significant degradation of the material as a consequence of their oxidation. Herein, we show that the large surface acceleration-on the order of 10 million g's-produced by high-frequency (10 MHz) nanometer-order electromechanical vibrations on a chip-scale piezoelectric substrate is capable of efficiently nebulizing, and consequently dimensionally reducing, a suspension of multilayer Ti₃C₂T_z (MXene) into predominantly monolayer nanosheets and quantum dots while, importantly, preserving the material from any appreciable oxidation. As an example application, we show that the high-purity MXene quantum dots produced using this room-temperature chemical-free synthesis method exhibit superior performance as electrode materials for electrochemical sensing of hydrogen peroxide compared to the highly oxidized samples obtained through conventional hydrothermal synthesis. The ability to detect concentrations as low as 5 nM is a 10-fold improvement to the best reported performance of Ti₃C₂T_z MXene electrochemical sensors to date.

Porous Silicon Carbide (SiC): A Chance for Improving Catalysts or Just Another Active-Phase Carrier?

There is an obvious gap between efforts dedicated to the control of chemicophysical and morphological properties of catalyst active phases and the attention paid to the search of new materials to be employed as functional carriers in the upgrading of heterogeneous catalysts. Economic constraints and common habits in preparing heterogeneous catalysts have narrowed the selection of active-phase carriers to a handful of materials: oxide-based ceramics (e.g. Al₂O₃, SiO₂, TiO₂, and aluminosilicates-zeolites) and carbon. However, these carriers occasionally face chemicophysical constraints that limit their application in catalysis. For instance, oxides are easily corroded by acids or bases, and carbon is not resistant to oxidation. Therefore, these carriers cannot be recycled. Moreover, the poor thermal conductivity of metal oxide carriers often translates into permanent alterations of the catalyst active sites (i.e. metal active-phase sintering) that compromise the catalyst performance and its lifetime on run. Therefore, the development of new carriers for the design and synthesis of advanced functional catalytic materials and processes is an urgent priority for the heterogeneous catalysis of the future. Silicon carbide (SiC) is a non-oxide semiconductor with unique chemicophysical properties that make it highly attractive in several branches of catalysis. Accordingly, the past decade has witnessed a large increase of reports dedicated to the design of SiC-based catalysts, also in light of a steadily growing portfolio of porous SiC materials covering a wide range of well-controlled pore structure and surface properties. This review article provides a comprehensive overview on the synthesis and use of macro/mesoporous SiC materials in catalysis, stressing their unique features for the design of efficient, cost-effective, and easy to scale-up heterogeneous catalysts, outlining their success where other and more classical oxide-based supports failed. All applications of SiC in catalysis will be reviewed from the perspective of a given chemical reaction, highlighting all improvements rising from the use of SiC in terms of activity, selectivity, and process sustainability. We feel that the experienced viewpoint of SiC-based catalyst producers and end users (these authors) and their critical presentation of a comprehensive overview on the applications of SiC in catalysis will help the readership to create its own opinion on the central role of SiC for the future of heterogeneous catalysis.

Insight into the role of copper in the promoted photocatalytic removal of NO using Zn2-xCuxCr-CO3 layered double hydroxide

In this work the ability of Zn_2-xCu_xCr-CO₃ layered double hydroxides (LDHs) as highly efficient DeNOx photocatalysts was studied. LDHs with x = 0, 0.2 and 0.4 were prepared using a coprecipitation method. The samples were characterized by different techniques such as XRD, XPS, FT-IR, ICP-MS, TG, SBET, SEM and Diffuse reflectance (DR). The increased amount of copper ions in the LDH layers gave rise to slight changes in the structure and morphology and an important variation of the optical properties of the LDHs. The prepared ZnCuCr-CO₃ photocatalysts exhibited favourable conversion efficiency (51%) and an extraordinary selectivity (97%) for the photochemical NO abatement. The photochemical mechanism was elucidated from DOS, EPR, Femtosecond transient absorption and in-situ DRIFTS studies. The results suggested that the presence of Cu²⁺ ions in the LDH framework introduced new states in the valence band states, thus favouring the production and mobility of e^-/h⁺ charge carriers and a greater production of ⋅O₂^- and ⋅OH.

Plasmonic Enhancement in Water Splitting Performance for NiFe Layered Double Hydroxide-N10 TC MXene Heterojunction

MXene-based material has attracted wide attention due to its tunable band gap, high conductivity and impressive optical and plasmonic properties. Herein, a hetero-nanostructured water splitting system was developed based on N-doped Ti₃ C₂ (N₁₀ TC) MXene and NiFe layered double hydroxide (LDH) nanosheets. The oxygen evolution reaction performance of the NiFe-LDH significantly enhanced to approximately 8.8-fold after incorporation of N₁₀ TC. Meanwhile, the Tafel slope was only 58.1 mV dec^-1 with light irradiation, which is lower than pure NiFe-LDH nanosheets (76.9 mV dec^-1 ). All results manifested the vital role of the N₁₀ TC MXene induced plasmonic hot carriers via electrophoto-excitation in enhancing the full water splitting performance of the as-prepared system. This work is expected to provide a platform for designing various plasmonic MXenes-based heterogeneous structures for highly efficient catalytic applications.

Anchoring of Formamidinium Lead Bromide Quantum Dots on Ti3C2 Nanosheets for Efficient Photocatalytic Reduction of CO2

Metal halide perovskite with a suitable energy band structure and excellent visible-light response is a prospective photocatalyst for CO₂ reduction. However, the reported inorganic halide perovskites have undesirable catalytic performances due to phase-sensitive and severe charge carrier recombination. Herein, we anchor the FAPbBr₃ quantum dots (QDs) on Ti₃C₂ nanosheets to form a FAPbBr₃/Ti₃C₂ composite within a Schottky heterojunction for photocatalytic CO₂ reduction. Upon visible-light illumination, the FAPbBr₃/Ti₃C₂ composite photocatalyst exhibits an appealing photocatalytic performance in the presence of deionized water. The Ti₃C₂ nanosheet acts as an electron acceptor to promote the rapid separation of excitons and supply specific catalytic sites. An optimal electron consumption rate of 717.18 μmol/g·h is obtained by the FAPbBr₃/0.2-Ti₃C₂ composite, which has a 2.08-fold improvement over the pristine FAPbBr₃ QDs (343.90 μmol/g·h). Meanwhile, the FAPbBr₃/Ti₃C₂ photocatalyst also displays a superior stability during photocatalytic reaction. This work expands a new insight and platform for designing superb perovskite/MXene-based photocatalysts for CO₂ reduction.

Layer-dependent photocatalysts of GaN/SiC-based multilayer van der Waals heterojunctions for hydrogen evolution

The interlayer interaction has a great influence on the formation of type-II heterojunctions, which can efficiently decompose water.