Formation of a Photoelectrochemical Z-Scheme Structure with Inorganic/Organic Hybrid Materials for Evaluation of Receptor Protein Expression on the Membrane of Cancer Cells

A portable photoelectrochemical aptasensor based on voltage-resolved dual-signal output for the determination of chloramphenicol

Developing a ratiometric photoelectrochemical (PEC) aptasensor that can produce cathode-anode dual photocurrent signals is still a great challenge. Herein, we report a novel portable voltage-resolved ratiometric PEC aptasensor for the determination of chloramphenicol (CAP) with a digital multimeter (DMM) and voltage and current signal generator (VCSG) readout. Ru(bpy)32 +-BiOBr heterojunction was employed as the only photoactive material, which is switched between type II and Z - scheme by varying the bias voltage (+0.1/-0.2 V). With the increase of CAP concentration, the PEC signal of type II (I+0.1) is positive and decreases at + 0.1 V, while the PEC signal of Z - scheme (I-0.2) is negative and increases at -0.2 V. Due to the selectivity of aptamer method and sensitivity of ratiometric method (I-0.2/I+0.1), the as-prepared aptasensor for detecting CAP exhibits an excellent linear detection range from 5.0 × 10-12 to 1.0 × 10-7 M with a limit of detection of 1.2 × 10-12 M. In addition, this portable aptasensor was used to detect CAP in real samples with satisfactory results, revealing a promising avenue for the on-site analysis and food safety.

Hyaluronan and Glucose Dual-targeting Probe: Synthesis and Application

In this work, we developed a dual-targeting probe consisted of well-defined hyaluronan (HA) oligosaccharide and glucose (Glc) labeled with Rhodamine B (HGR). The probe was designed to enhance tumor targeting both in vitro and in vivo, by simultaneously targeting CD44 and Glc transporter 1 (GLUT1). The HA oligosaccharide component was crucial for accurately assessing the impact of sugar chain structure on targeting efficacy, while its unoccupied carboxyl groups could minimize interference with HA's binding affinity to CD44. In vitro studies demonstrated that HGR possessed remarkable cytocompatibility and superior targeting abilities compared to single-targeting probes. It displayed a marked preference for CD44high/GLUT1high cells rather than CD44low/GLUT1low cells. In vivo studies using murine models further confirmed the significantly enhanced targeting efficacy and excellent biocompatibility of HGR. Therefore, this designed dual-targeting probe holds potential for clinical tumor detection.

Cu2O-Mediated Heterojunction Conversion from Dual Type II to Dual Z-Scheme: Its Application in Photoelectric-Colorimetric Dual-Mode Detection of Fat Mass and Obesity-Associated (FTO) Protein

Although the construction of heterojunction has been used in photoelectrochemical (PEC) biosensors, their potential for tunable optical properties has not been deeply explored. Based on the fact that a type-II heterojunction and Z-scheme heterojunction have the same energy band structure, effective alteration of the electron transfer pathway has been achieved by introducing unique photoactive materials into the system and exploiting the interactions between the photomaterials. Based on this, we reported a novel polarity-switchable dual-mode sensor for fat mass and obesity-associated (FTO) protein analysis. Specifically, the MgIn2S4/Bi2MoO6/Bi2S3 dual type-II heterojunction was used as the sensing interface in concert with the rolling circle amplification, CRISPR/Cas12, and terminal DNA transfer enzyme multiamplification strategies, and finally, Cu2O was captured at the sensing interface. Due to the matched energy band, the introduction of Cu2O effectively changed the electron transfer pathway and realized the conversion from a dual type-II heterojunction to a dual Z-scheme heterojunction. It caused the switch of the photocurrent from the anode to the cathode. The developed PEC method showed high sensitivity and selectivity for FTO protein detection in the range of 0.0005-500 μg/L. In addition, based on the peroxidase-like activity of Cu2O to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine by H2O2, the electrode system also achieved the colorimetric detection of FTO protein using the naked eye with the change of the color of the detection solution from colorless to blue. The detection range was from 0.05 to 500 μg/L. This work developed a photoelectrochemical-colorimetric biosensing platform with consciously designed semiconductor structures, revealing the potential of semiconductor-structured transformations in future sensing fields.

A multi-modal biosensing platform based on Ag-ZnIn2S4@Ag-Pt nanosignal probe-sensitized UiO-66 for ultra-sensitive detection of penicillin

We designed a multi-modal biosensing platform for versatile detection of penicillin based on a unique Ag-ZnIn2S4@Ag-Pt signal probe-sensitized UiO-66 metal-organic framework. Firstly, a large number of Ag-ZnIn2S4 quantum dots (AZIS QDs) were attached to Ag-Pt NPs, preparing a new multi-signal probe AZIS QDs@Ag-Pt NPs with excellent photoelectrochemistry (PEC), electrochemiluminescence (ECL), and fluorescence (FL) signals. Moreover, the AZIS QDs@Ag-Pt NPs signal probe can well match the energy level of UiO-66 metal-organic framework (MOF) with good photoelectric property, which can reverse the PEC current of UiO-66 to reduce false positives in detection. When penicillin was present, it bound to its aptamer to release the multifunctional signal probes, which can generate PEC, ECL, and PL signals, thus realizing ultrasensitive detection of penicillin by multi-signals. This work creates a novel three-signal QDs probe, which makes a great contribution to multi-mode photoelectric sensing analysis. The LOD of this work (3.48 fg·mL-1) was much lower than the MRLs (Maximum Residue Levels) established by the EU (4 ng·mL-1). The newly developed multi-mode biosensor has good practical application values in various biological detection, food assay, and early disease diagnosis.

Superior photo-Fenton degradation of acetamiprid by α- Fe2O3-pillared bentonite/L-cysteine complex: Synergy of L-cysteine and visible light

Acetamiprid is a potential threat to human health, aquatic life, soil microorganisms and beneficial insects as a recalcitrant pollutant in wastewater treatment plant effluents. In this work, the synthesized α-Fe2O3-pillared bentonite (FPB) was used to degrade acetamiprid in the photo-Fenton process with the assistance of L-cysteine (L-cys) existing in natural aquatic environment. The kinetic constant k of acetamiprid degradation by FPB/L-cys in the photo-Fenton process was far more than that in the Fenton process of FPB/L-cys lacking light and the photo-Fenton process of FPB without L-cys. The positive linear correlation between k and ≡Fe(II) content indicated the synergy of L-cys and visible light accelerated the cycle of Fe(III) to Fe(II) in FPB/L-cys during the degradation of acetamiprid by elevating the visible light response of FPB, and promoting the interfacial electron transfer from the active sites of FPB to hydrogen peroxide and photo-generated electron transfer from conduction band of α-Fe2O3 to the active sites of FPB. The boosting •OH and 1O2 were predominantly responsible for acetamiprid degradation. Acetamiprid could be efficiently degraded into less toxic small molecules in the photo-Fenton process via C-N bond breaking, hydroxylation, demethylation, ketonization, dechlorination, and ring cleavage.

Advanced electrocatalytic materials based biosensors for cancer cell detection – A review

Herein, we have highlighted the latest developments on biosensors for cancer cell detection. Electrochemical (EC) biosensors offer several advantages such as high sensitivity, selectivity, rapid analysis, portability, low‐cost, etc. Generally, biosensors could be classified into other basic categories such as immunosensors, aptasensors, cytosensors, electrochemiluminescence (ECL), and photo‐electrochemical (PEC) sensors. The significance of the EC biosensors is that they could detect several biomolecules in human body including cholesterol, glucose, lactate, uric acid, DNA, blood ketones, hemoglobin, and others. Recently, various EC biosensors have been developed by using electrocatalytic materials such as silver sulfide (Ag2S), black phosphene (BPene), hexagonal carbon nitrogen tube (HCNT), carbon dots (CDs)/cobalt oxy‐hydroxide (CoOOH), cuprous oxide (Cu2O), polymer dots (PDs), manganese oxide (MnO2), graphene derivatives, and gold nanoparticles (Au‐NPs). In some cases, these newly developed biosensors could be able to detect cancer cells with a limit of detection (LOD) of 1 cell/mL. In addition, many remaining challenges have to be addressed and validated by testing more real samples and confirm that these EC biosensors are more accurate and reliable to measure cancer cells in the blood and salivary samples.

Multifunctional Photoelectrochemical Biosensor Based on ZnIn2S4/ZnS QDs@Au-Ag-Reversed Photocurrent of Cu-Metal-Organic Framework Coupled with CRISPR/Cas-12a-Shearing for Assay of Dual Targets

False positives and negatives in bioanalytical assays remain a persistent problem. Herein, a multifunctional photoelectrochemical (PEC) biosensor based on ZnIn₂S₄ (ZIS)/ZnS quantum dots (QDs)@Au-Ag-reversed photocurrent of Cu-metal-organic framework (MOF) coupled with CRISPR/Cas-12a-shearing was innovatively developed for assay of dual targets. First, Cu-MOF as a good PEC material shows cathodic photocurrent. Then, numerous ZIS/ZnS QDs were assembled to the Au-Ag nanoparticles (NPs) to prepare a stable and highly amplified signal probe, which can just match the energy level of Cu-MOFs and realized the polarity-reversed photocurrent of Cu-MOF for the first time. As the empty-core nanostructure of Au-Ag NPs has a high specific surface area and low material density, the bimetallic nanocrystal can much increase the reaction rate and improve the redox efficiency. When target CEA-produced cDNA opened the hairpin DNA (HP1 DNA) on the electrode, the ZIS/ZnS QDs@Au-Ag signal probe was conjugated to the electrode via DNA hybridization, achieving a significantly reversed PEC current for CEA detection. Moreover, the specific binding of kanamycin/aptamer generated the acDNA (activator), which can activate the trans-cleavage activity of the CRISPR-CAS12a system on ssDNA, so the signal probe was sheared and caused the obvious decrease of PEC signal for kanamycin detection. The newly developed ZIS/ZnS QDs@Au-Ag NPs displayed excellent PEC properties and reversed photocurrent to MOF and were combined with the unique CRISPR-Cas12a system to achieve sensitive detection of dual targets, which can open a new polarity-reversed PEC sensing platform for rapid and accurate analysis of multiple targets and can effectively avoid false positives results in clinical testing.

KuQuinones: a ten years tale of the new pentacyclic quinoid compound

Quinones are widespread in nature, as they participate, mainly as redox mediators, in several biochemical processes. Up to now, various synthetic quinones have been recommended in the literature as leading molecules in energy, biomedical and catalytic fields. In this brief review, we retraced our research activity in the last ten years, mainly dedicated to the study of a new class of peculiar pentacyclic conjugated quinoid compounds, synthesized in our group. In particular, their application as sensitive materials in photoelectrochemical devices and in biosensors, as photocatalysts in selective oxidation reactions, and their anticancer activity is here reviewed.

Stimulus-Responsive Metal-Organic Framework Signal-Reporting System for Photoelectrochemical and Fluorescent Dual-Mode Detection of ATP

Dual-mode bioanalysis integrating photoelectrochemical (PEC) and other modes is emerging and allows signal cross-checking for more reliable results. Metal-organic frameworks (MOFs) have been shown to be attractive materials in various biological applications. This work presents the utilization of MOF encapsulation and stimuli-responsive decapsulation for dual-mode PEC and fluorescence (FL) bioanalysis. Photoactive dye methylene violet (MV) was encapsulated in zeolitic imidazolate framework-90 (ZIF-90) to form an MV@ZIF-90 hybrid material, and MV could be released by adenosine triphosphate (ATP)-induced ZIF-90 disintegration. The released MV not only had FL emission but also had a sensitization effect on the ZnIn₂S₄ (ZnInS) photoanode. Based on the MV-dependent sensitization effect and FL emission characteristic, a dual-mode PEC-FL strategy was established for ATP detection with low detection limits, that is, 3.2 and 4.1 pM for PEC and FL detection, respectively. This study features and will inspire the construction and implementation of smart MOF materials for dual-mode bioanalysis.

Smart nanomaterials for cancer diagnosis and treatment

Innovations in nanomedicine has guided the improved outcomes for cancer diagnosis and therapy. However, frequent use of nanomaterials remains challenging due to specific limitations like non-targeted distribution causing low signal-to-noise ratio for diagnostics, complex fabrication, reduced-biocompatibility, decreased photostability, and systemic toxicity of nanomaterials within the body. Thus, better nanomaterial-systems with controlled physicochemical and biological properties, form the need of the hour. In this context, smart nanomaterials serve as promising solution, as they can be activated under specific exogenous or endogenous stimuli such as pH, temperature, enzymes, or a particular biological molecule. The properties of smart nanomaterials make them ideal candidates for various applications like biosensors, controlled drug release, and treatment of various diseases. Recently, smart nanomaterial-based cancer theranostic approaches have been developed, and they are displaying better selectivity and sensitivity with reduced side-effects in comparison to conventional methods. In cancer therapy, the smart nanomaterials-system only activates in response to tumor microenvironment (TME) and remains in deactivated state in normal cells, which further reduces the side-effects and systemic toxicities. Thus, the present review aims to describe the stimulus-based classification of smart nanomaterials, tumor microenvironment-responsive behaviour, and their up-to-date applications in cancer theranostics. Besides, present review addresses the development of various smart nanomaterials and their advantages for diagnosing and treating cancer. Here, we also discuss about the drug targeting and sustained drug release from nanocarriers, and different types of nanomaterials which have been engineered for this intent. Additionally, the present challenges and prospects of nanomaterials in effective cancer diagnosis and therapeutics have been discussed.

Recent progress in the early detection of cancer based on CD44 biomarker; nano-biosensing approaches

CD44 is a cell matrix adhesion molecule overexpressed on the cell surfaces of the major cancers. CD44 as a cancer-related biomarker has an essential role in the invasion and metastasis of cancer. The detection and quantification of CD44 can provide essential information useful for clinical cancer diagnosis. In this regard, biosensors with sensitive and specific properties, give prominence to the development of CD44 detection platforms. To date, various aptamer-based sensitive-enhancers together with nanoparticles (NPs) have been combined into the biosensors systems to provide an innovative biosensing method (aptasensors/nano-aptasensors) with substantially improved detection limit. This review article discusses the recent advances in the field of biosensors, nanobiosensors, and aptasensors for the quantitative determination of CD44 and the detection of CD44-expressing cancer cells.

Self-powered photoelectrochemical aptasensor based on MIL-68(In) derived In2O3 hollow nanotubes and Ag doped ZnIn2S4 quantum dots for oxytetracycline detection

A self-powered photoelectrochemical (PEC) aptasensor was constructed based on MIL-68(In) derived indium oxide hollow nanotubes (In₂O₃ HNs) and Ag-doped ZnIn₂S₄ quantum dots (QDs) as sensing matrix for the ultrasensitive detection of oxytetracycline (OTC). The hollow tube structure of the designed photoelectric active platform provided abundant active sites and a larger specific surface area for the immobilization of target recognition unit. The coupling of Ag:ZnIn₂S₄ QDs and In₂O₃ HNs can accelerate the transmit and separation of photoinduced charge, and thus greatly increasing the intensity of photocurrent signal. Then, the well-constructed OTC-aptamer was anchored on the modified photoelectrode as an accurate capturing element, achieving the specific detection of analyte. Under optimal conditions, the photocurrent intensity of the PEC aptasensor decreases linearly, with a linear response range of 10^-4 -10 nmol/L, and a limit of detection (LOD) of 3.3 × 10^-5 nmol/L (S/N = 3). The developed self-powered aptasensor with excellent reproducibility, stability, and selectivity, provides a potential way to detect antibiotic residues in environmental media.

Optical cytosensors for the detection of circulating tumour cells

Blood analysis is an established approach to monitor various diseases, ranging from heart defects and diabetes to cancer. Among various tumor markers in the blood, circulating tumor cells (CTCs) have received increasing attention due to the fact that they originate directly from the tumors. Capturing and detecting CTCs represents a promising approach in cancer diagnostics and clinical management of cancers. CTCs in blood progress to self-seeding a tumour or initiating a new lesion mass. Cytosensors are biosensors intended to identify CTCs in a blood sample of cancer patients and provide information about the cancer status. Herein, we firstly discuss different detection methods of state-of-the-art optical cytosensors, including colorimetry, fluorescence, surface plasmon resonance, photoelectrochemistry and electrochemiluminescence. Then we review the significant advances made in implementing biorecognition elements and nanomaterials for the detection of cancer cells. Despite great progress in optical cytosensors, and their integration with smartphones, they have still only been explored to prototype stages. Much more effort is needed to fulfil their potential in modern cancer diagnostics and in monitoring the state of disease for cancer patients.

A highly sensitive electrochemical cytosensor based on a triple signal amplification strategy using both nanozyme and DNAzyme

The development of a sensitive cytosensor is beneficial for the early diagnosis and treatment of cancer. Herein, highly sensitive cytosensing was achieved by applying triple signal amplification strategies with Fe₃O₄@Au nanozymes and DNAzyme hybrids as electrochemical nanoprobes and toluidine blue (Tb) as the electron transfer medium. The Fe₃O₄@Au nanocomposites not only acted as nanozymes with excellent catalytic performance towards H₂O₂ reduction but also served as promising scaffolds to carry massive electroactive substances and DNA probes. The dual-functional DNA probes were designed with the sequence of hemin/G-quadruplex to serve as the DNAzyme and the sequence of aptamer to recognize cancer cells. Furthermore, Tb was also conjugated to the surface of the Fe₃O₄@Au nanohybrids, working as the electron transport medium to magnify the electrochemical response. With the above design, the Fe₃O₄@Au nanozymes and hemin/G-quadruplex DNAzyme efficiently co-catalyzed the reduction of H₂O₂ to accelerate the electron transfer of Tb, which realized triple signal amplification and finally improved the performance of the electrochemical cytosensor. The proposed cytosensor achieved a sensitive detection of HepG2 cells with a low detection limit of 20 cells mL^-1, and could be potentially used as an effective analysis tool in early cancer diagnosis in the future.

Recent advances in electron manipulation of nanomaterials for photoelectrochemical biosensors

This feature article discusses the recent advances and strategies of building photoelectrochemical (PEC) biosensors from the perspective of regulating the electron transfer of nanomaterials.

Electrochemical Sensors for Detection of Markers on Tumor Cells

In recent years, the increasing incidence and mortality of cancer have inspired the development of accurate and rapid early diagnosis methods in order to successfully cure cancer; however, conventional methods used for detecting tumor cells, including histopathological and immunological methods, often involve complex operation processes, high analytical costs, and high false positive rates, in addition to requiring experienced personnel. With the rapid emergence of sensing techniques, electrochemical cytosensors have attracted wide attention in the field of tumor cell detection because of their advantages, such as their high sensitivity, simple equipment, and low cost. These cytosensors are not only able to differentiate tumor cells from normal cells, but can also allow targeted protein detection of tumor cells. In this review, the research achievements of various electrochemical cytosensors for tumor cell detection reported in the past five years are reviewed, including the structures, detection ranges, and detection limits of the cytosensors. Certain trends and prospects related to the electrochemical cytosensors are also discussed.

Label-Free Antifouling Photoelectrochemical Sensing Strategy for Detecting Breast Tumor Cells Based on Ligand-Receptor Interactions

Biomarker expression both on the cell surface and in serum is directly related to the pathological process of tumor. Based on the interaction between the ligand and the protein receptor, a label-free photoelectrochemical (PEC) biosensing interface with good antifouling ability was proposed for tumor cell detection. TiO₂ nanotube (NT) arrays were used as the substrate to enhance the ability of the biosensor to capture the target. Mercapto-terminated 8-arm poly(ethylene glycol) was introduced onto the electrode surface by the deposition of Au nanoparticles on TiO₂ NTs, creating an antifouling molecular layer. The recognition ligand hyaluronic acid (HA) was functionalized by dopamine and introduced onto the sensing surface based on the unique chelating interaction between the catechol group and the titanium atom. Benefitting from the specific recognition of HA with CD44 and the 3D porous structures of NTs, the constructed PEC biosensor showed excellent abilities toward the detection of MDA-MB-231 breast tumor cells and the soluble form of CD44. The ligand-receptor PEC sensing strategy has promising potential for the detection of tumor cells and protein biomarkers.

A signal-on photoelectrochemical aptasensor for chloramphenicol assay based on 3D self-supporting AgI/Ag/BiOI Z-scheme heterojunction arrays

Severe challenges are still remained for development of highly sensitive, selective and stable photoelectrochemical (PEC) sensing technology, albeit with its broad application for chloramphenicol (CAP) detection. Herein, a novel "signal-on" PEC aptasensor was fabricated based on a 3D self-supporting Z-scheme AgI/Ag/BiOI heterojunction arrays subtly integrated with in-situ formed biocatalytic precipitation (BCP) for highly sensitive and selective determination of CAP. Impressively, the HRP modified CAP aptamer (HRP-CAP aptamer) was released from the electrode by its strong affinity to the introduced CAP, and gradually terminated the BCP reaction, in turn recovering the photocurrent. By virtues of the 3D self-supporting AgI/Ag/BiOI Z-scheme heterojunction arrays and BCP signal amplification strategy, the resultant PEC sensor exhibited a wide linear range of 2-250 nM with a limit of detection (LOD) as low as 0.226 nM (S/N = 3). This work opens a new avenue for design of PEC aptasensing strategy and exhibits the marvelous potential in bioanalysis of environmental samples.

Visible light-driven photoelectrochemical ampicillin aptasensor based on an artificial Z-scheme constructed from Ru(bpy)32+-sensitized BiOI microspheres

Dye sensitization is an alternative strategy to improve photoelectric activity of semiconductors and, particularly, to enhance the activity towards visible light domain. Herein, an artificial Z-scheme bipyridine ruthenium (Ru(bpy)32+) sensitizing narrow-gap bismuth oxy-iodide (BiOI) microspheres was constructed by a simple electrostatic interaction strategy for the first time. The electrochemical impedance spectroscopy (EIS) and photoluminescence (PL) analysis showed that this design of such Z-scheme structure was helpful to enhance the interfacial charge transfer and improve the photoelectric conversion efficiency. In addition, due to the sensitization of Ru(bpy)32+, the band gap was narrowed from 1.8 eV of BiOI microspheres to 1.3 eV of BiOI/Ru(bpy)32+ microspheres, leading to improve the utilization of visible light. So that, the photocurrent of the resulted BiOI/Ru(bpy)32+ was 13.0 times that of pure BiOI microspheres. In view of the outstanding photoelectrochemical (PEC) performance of BiOI/Ru(bpy)32+ and the high specificity of the aptamer, the PEC aptasensor for ampicillin (AMP) merits the excellent detection performance including a broad linear ranging from 1 × 10-7 nM to 100 nM as well as a low detection limit of 3.3 × 10-8 nM (S/N = 3). This work not only provides a novel way to construct and design highly efficient photoactive materials for PEC detection, but also broadens the application of Z-scheme in the field of sensing.