NiCo Metal-Organic Framework and Porous Carbon Interlayer-Based Supercapacitors Integrated with a Solar Cell for a Stand-Alone Power Supply System

A metal-organic framework-derived α-MnS/MWCNT composite as a promising pseudocapacitive material for a flexible quasi-solid-state asymmetric supercapacitor device

The low conductivity of traditionally used pseudocapacitive materials like transition metal oxides has forced researchers to look for alternative materials. Transition metal sulfides are being investigated as viable alternative materials and have shown promising results. In this work, an α-MnS/MWCNT composite is selected as the active material for supercapacitor application. α-MnS has better conductivity than many transition metal oxides but has an extremely low specific surface area (10.5 m2 g-1), which reduces its specific capacitance. Metal-organic framework (MOF)-derived materials are known to possess higher specific surface area and favorable pore size distribution. Herein, α-MnS/MWCNT composites are synthesized via two routes: the conventional solvothermal technique and the MOF route, and their performance is compared. It is proved that the α-MnS/MWCNT composite synthesized through the MOF route shows a favorable porous structure and better performance than the composite synthesized through the conventional route. It shows a specific surface area of 47.6 m2 g-1 and a specific capacitance of 546.3 F g-1 at 1 A g-1 with a mass loading of 1.5 mg cm-2 in 3 M KOH under a 3-electrode configuration. A flexible quasi-solid-state asymmetric supercapacitor device is fabricated with MOF-derived α-MnS/MWCNT as the positive electrode material, and the device achieved a potential window of 1.4 V, a specific capacitance of 82.5 F g-1 at 1 A g-1 and a capacitance retention of 90.1% after 5000 cycles at 10 A g-1. The results clearly indicate that transition metal sulfides like MOF-derived α-MnS can be a viable alternative to traditional materials like transition metal oxides. The assembled device has the potential to power flexible, wearable electronics.

MOF-Based Bioelectronic Supercapacitors

Metal-organic frameworks (MOFs) represent a highly promising material class for bioelectronic supercapacitors, characterized by their adjustable structures, extensive surface areas, and superior electrochemical properties. This research explores the synthesis and incorporation of MOF-based materials into bioelectronic devices aimed at energy storage and biosensing applications. The focus is on improving the electrochemical performance of MOFs while preserving their structural integrity through functionalization with biocompatible polymers and conductive materials. The resulting MOF-based bioelectronic supercapacitors exhibit significant improvements in specific capacitance, energy density, and cycling stability. Additionally, the inclusion of bioreceptors allows for the simultaneous detection of biochemical signals alongside energy storage, thus enabling innovative applications in wearable electronics and health monitoring systems. These results suggest that MOF-based supercapacitors have the capacity to fulfill energy storage needs while also advancing bioelectronics by merging energy and sensing capabilities.

Bimetallic Ni-Co-MOF Nanostructures for Seawater Electrolysis: Unveiling the Mechanism of the Oxygen Evolution Reaction Using Impedance Spectroscopy

Designing anode electrodes with long-term stability and efficiency for seawater electrolysis is crucial for addressing key challenges in sustainable hydrogen production and clean energy systems. Here, we developed self-supporting bimetallic Ni-Co-MOF electrodes, demonstrating exceptional performance and durability in alkaline seawater electrolysis due to their high voltammetric charge density and increased electrochemically accessible active sites. The reaction kinetics of the water oxidation reaction in the presence of Cl- ions (at concentrations ranging from 0.5 M to 3.5 M) were investigated through electrochemical impedance spectroscopy (EIS) analysis, focusing on the kinetic parameters, suggesting that the rate-determining step (RDS) is the chemical process following the initial electron transfer. Notably, Cl- ions in the electrolyte medium do not alter the OER rate-limiting step, as indicated by negligible variations in the anodic transfer coefficient values. However, blocking active sites is evident from the decrease in interfacial chemical capacitance (Cchem) values with increasing Cl- concentration. These findings offer a deeper understanding of OER reaction kinetics in chloride-containing environments by correlating electrochemical kinetic parameters with active site availability. This work highlights critical considerations for designing efficient and durable anodes for seawater electrolysis.

Synthesis of 2D NiCo-MOF/GO/CNTs flexible films for high-performance supercapacitors

Flexible two-dimensional nickel-cobalt metal-organic frameworks/graphene oxide/carbon nanotubes (2D NiCo-MOF/GO/CNTs) hybrid films have been designed and prepared as high-performance supercapacitor electrode materials via vacuum filtration. The 2D NiCo-MOF nanosheets serve as the main source of capacitance for the hybrid films, while CNTs function as both the conductive network, enhancing the electrical conductivity of the MOFs, and the binder, linking the 2D NiCo-MOF nanosheets and GO. When the mass ratio of 2D NiCo-MOF, GO, and CNTs is 2 : 1 : 0.5, the hybrid film exhibits a high specific capacitance of 40.3 F g-1 at 0.4 A g-1. Furthermore, the film electrode demonstrates outstanding cycling stability, with a capacitance retention of 82.8% after 5000 cycles at 1 A g-1. Notably, the CV curves of the asymmetric supercapacitor (ASC) show almost no change after multiple bending, indicating excellent flexibility. Additionally, two devices connected in series can light an LED, demonstrating significant potential for practical applications.

Environmental Stability Determines the Cytotoxicity of Metal-Organic Frameworks to a Nitrogen-Fixing Bacterium Azotobacter vinelandii

During widespread applications of metal-organic frameworks (MOFs), the environmental hazards and risks of MOFs have aroused great concerns. In this study, we aimed to reveal the importance of the environmental stability of MOFs on their toxicity. Two Zn-MOFs, namely, ZIF-8 with high aqueous stability and Zn-BDC with low aqueous stability, were compared directly in the toxicological evaluations of a nitrogen-fixing bacterium Azotobacter vinelandii. Zn-BDC showed strong cytotoxicity at 100 mg/L and higher, inducing growth inhibition, cell apoptosis, structural changes, oxidative damage, and, consequently, loss of nitrogen fixation ability. In contrast, ZIF-8 was nearly nontoxic to A. vinelandii. The transcriptome analysis showed that Zn-BDC directly disturbed the ribosome pathway and lowered the expression level of nitrogen-fixing nif cluster genes. On the other hand, ZIF-8 stress could regulate the flagellar assembly, siderophore group nonribosomal peptide biosynthesis, bacterial chemotaxis, and amino sugar and nucleotide sugar metabolism pathways to promote the cell growth of A. vinelandii. Beyond that, the toxicity of Zn-MOFs to A. vinelandii was associated with the release of Zn2+, but Zn-MOFs were less toxic than the mixtures of their starting materials. Overall, our results suggested that the environmental stability of Zn-MOFs determined their environmental toxicity through different molecular pathways. Designing stable MOFs is preferred due to environment-friendly considerations.

Enhanced Electrochemical Detection of Valganciclovir Using a Hierarchically Structured Lisianthus Flower-Inspired Bimetallic Ni-Ce Organic Framework

This study reports the development of an innovative electrochemical sensor based on organometallic framework nanostructures for detecting valganciclovir (VLCV). VLCV is employed in the treatment of cytomegalovirus retinitis in AIDS patients. Rational design of nanoarchitectures for electroactive materials is a crucial approach for boosting their electrocatalytic performance. Herein, Lisianthus flower-inspired Ni-Ce-metal-organic framework (MOF), Ni-MOF, and rod-inspired Ce-MOF were synthesized by the solvothermal method. An electrochemical sensor for VLCV was developed by employing a multilayer approach using Lisianthus flower-inspired Ni-Ce metal-organic framework/multiwall carbon nanotubes (Ni-Ce-MOF/MWCNTs) modification on a glassy carbon electrode (GCE). Incorporating a bimetallic Ni-Ce-MOF into a conventional conductive material, such as MWCNTs, significantly increases the specific surface area and improves the conductivity and catalytic properties of the MWCNTs. Relative to the rod-inspired Ce-MOF and Ni-MOF, the electrocatalytic performance of the Lisianthus flower-inspired Ni-Ce-MOF coated on MWCNTs surpasses that of the rod-inspired Ce-MOF, showcasing enhanced performance in VLCV oxidation. This superiority arises from their enhanced electrical conductivity and enlarged surface area. The Lisianthus flower-inspired Ni-Ce-MOF/MWCNTs/GCE demonstrated extensive linear ranges (ranging from 4.0 to 3800.0 nM), a lower detection limit (1.4 nM), remarkable selectivity, and sustained stability over an extended period in the context of VLCV sensing. The real samples underwent analysis through using both electrochemical and UV-vis spectrophotometry methods, and the findings from both methods exhibited no substantial difference, validating the sensor's remarkable practical performance. These results suggest that Lisianthus flower-inspired Ni-Ce-MOF/MWCNTs/GCE electrocatalysts provide a promising sensing platform for analyzing biological samples.

Utilizing electrospun molecularly imprinted membranes for food industry: Opportunities and challenges

Molecularly imprinted polymers (MIPs) have been widely studied in environmental protection and food industry, owing to their excellent specific recognition and structural stability. However, MIPs prepared by conventional methods suffer from low adsorption capacity and slow mass transfer rate. To date, the combination of electrostatic spinning technology and molecular imprinting technology has been proposed to prepare molecularly imprinted membranes (MIMs) with specific recognition capability, and has shown great attraction in the separation and detection of food additives, as well as the extraction and release of active ingredients. In recent years, MIPs and electrostatic spinning technologies have been investigated and evaluated. However, there is no review of electrostatically spun MIMs for food field. In this review, we focus on the fabrication methods and applications of electrostatically spun MIMs in the food, discuss the challenges in practical food applications, and emphasize the promising applications of electrostatically spun MIMs in food field.

Activation of Carbonyl Groups in Polyimide-Based Covalent Organic Framework with Multiwalled Carbon Nanotubes toward Boosted Pseudocapacitance

Covalent organic frameworks (COFs) possessing a well-defined structure and abundant functional groups are prospective pseudocapacitive electrode materials. However, their intrinsic poor electrical conductivity and stacking problems usually impede the utilization of their active sites. Herein, we conduct an in situ growth of polyimide COFs (donated as NTDA COFs) enriched with carbonyl groups on multiwalled carbon nanotubes (MWCNTs). An impressive capacitance of 467 F g-1 at 1 A g-1 is achieved for the as-prepared NTDA/MWCNTs composite, significantly surpassing both the pure MWCNTs (60.3 F g-1) and NTDA COFs (284.4 F g-1). No decay of capacitance is observed after 10,000 cycles at 10 A g-1. The assembled device NTDA/MWCNTs//activated carbon reaches a high energy density of 17 Wh kg-1 at 750 W kg-1 while keeping superior charging/discharging stability of 89.5% after cycling for 19,000 times at 10 A g-1. In situ Fourier transform infrared (in situ FT-IR) tests together with the exploration of electrode kinetics show that the boosted capacitance of NTDA/MWCNTs is mainly donated by the redox reactions of carbonyl groups on NTDA COFs, which is largely activated by MWCNTs.

Boosting of Redox-Active Polyimide Porous Organic Polymers with Multi-Walled Carbon Nanotubes towards Pseudocapacitive Energy Storage

Redox-active porous organic polymers (POPs) demonstrate significant potential in supercapacitors. However, their intrinsic low electrical conductivity and stacking tendencies often lead to low utilization rates of redox-active sites within their structural units. Herein, polyimide POPs (donated as PMTA) are synthesized in situ on multi-walled carbon nanotubes (MWCNTs) from tetramino-benzoquinone (TABQ) and 1,4,5,8-naphthalene tetracarboxylic dianhydride (PMDA) monomers. The strong π-π stacking interactions drive the PMTA POPs and the MWCNTs together to form a PMTA/MWCNT composite. With the assistance of MWCNTs, the stacking issue and low conductivity of PMTA POPs are well addressed, leading to the obvious activation and enhanced utilization of the redox-active groups in the PMTA POPs. PMTA/MWCNT then achieves a high capacitance of 375.2 F g-1 at 1 A g-1 as compared to the pristine PMTA POPs (5.7 F g-1) and excellent cycling stability of 89.7% after 8000 cycles at 5 A g-1. Cyclic voltammetry (CV) and in situ Fourier-Transform Infrared (FT-IR) results reveal that the electrode reactions involve the reversible structural evolution of carbonyl groups, which are activated to provide rich pseudocapacitance. Asymmetric supercapacitors (ASCs) assembled with PMTA/MWCNTs and activated carbon (AC) offer a high energy density of 15.4 Wh kg-1 at 980.4 W kg-1 and maintain a capacitance retention of 125% after 10,000 cycles at 5 A g-1, indicating their good potential for practical applications.

Recent Advances in Photochargeable Integrated and All-in-One Supercapacitor Devices

Photoassisted energy storage systems, which enable both the conversion and storage of solar energy, have attracted attention in recent years. These systems, which started about 20 years ago with the individual production of dye-sensitized solar cells and capacitors and their integration, today allow more compact and cost-effective designs using dual-acting electrodes. Solar-assisted batterylike or hybrid supercapacitors have also shown promise with their high energy densities. This review summarizes all of these device designs and conveys the cutting-edge studies in this field. Besides, this review aims to emphasize the effects of point, extrinsic, intrinsic, and 2D-planar defects on the performance of photoassisted energy storage systems since it is known that defect structures, as well as electrical, optical, and surface properties, affect the device performance. Here, it is also targeted to draw attention to how critical the design, material selection, and material properties are for these new-generation energy conversion and storage devices, which have a high potential to see commercial examples quickly and to be recognized by more readers.

Metal-organic frameworks (MOFs) for energy production and gaseous fuel and electrochemical energy storage applications

The increasing energy demands in society and industrial sectors have inspired the search for alternative energy sources that are renewable and sustainable, also driving the development of clean energy storage and delivery systems. Various solid-state materials (e.g., oxides, sulphides, polymer and conductive nanomaterials, activated carbon and their composites) have been developed for energy production (water splitting-H2 production), gaseous fuel (H2 and CH4) storage and electrochemical energy storage (batteries and supercapacitors) applications. Nevertheless, the low surface area, pore volume and conductivity, and poor physical and chemical stability of the reported materials have resulted in higher requirements and challenges in the development of energy production and energy storage technologies. Thus, to overcome these issues, the development of metal-organic frameworks (MOFs) has attracted significant attention. MOFs are a class of porous materials with extremely high porosity and surface area, structural diversity, multifunctionality, and chemical and structural stability, and thus they can be used in a wide range of applications. In the present review, we precisely discuss the interesting properties of MOFs and the various methodologies for their synthesis, and also the future dependence on the valorization of solid waste for the recovery of metals and organic ligands for the synthesis of new classes of MOFs. Subsequently, the utilization of these interesting characteristics for energy production (water splitting), storage of gaseous fuels (H2 and CH4), and electrochemical storage (batteries and supercapacitors) applications are described. However, although MOFs are efficient materials with versatile uses, they still have many challenges, limiting their practical applications. Therefore, finally, we highlight the challenges associated with MOFs and show the way forward in overcoming them for the development of these highly porous materials with large-scale practical utility.

Progress of Photocapacitors

In response to the current trend of miniaturization of electronic devices and sensors, the complementary coupling of high-efficiency energy conversion and low-loss energy storage technologies has given rise to the development of photocapacitors (PCs), which combine energy conversion and storage in a single device. Photovoltaic systems integrated with supercapacitors offer unique light conversion and storage capabilities, resulting in improved overall efficiency over the past decade. Consequently, researchers have explored a wide range of device combinations, materials, and characterization techniques. This review provides a comprehensive overview of photocapacitors, including their configurations, operating mechanisms, manufacturing techniques, and materials, with a focus on emerging applications in small wireless devices, Internet of Things (IoT), and Internet of Everything (IoE). Furthermore, we highlight the importance of cutting-edge materials such as metal-organic frameworks (MOFs) and organic materials for supercapacitors, as well as novel materials in photovoltaics, in advancing PCs for a carbon-free, sustainable society. We also evaluate the potential development, prospects, and application scenarios of this emerging area of research.

Advances of Electroactive Metal-Organic Frameworks

The preparation of electroactive metal-organic frameworks (MOFs) for applications of supercapacitors and batteries has received much attention and remarkable progress during the past few years. MOF-based materials including pristine MOFs, hybrid MOFs or MOF composites, and MOF derivatives are well designed by a combination of organic linkers (e.g., carboxylic acids, conjugated aromatic phenols/thiols, conjugated aromatic amines, and N-heterocyclic donors) and metal salts to construct predictable structures with appropriate properties. This review will focus on construction strategies of pristine MOFs and hybrid MOFs as anodes, cathodes, separators, and electrolytes in supercapacitors and batteries. Descriptions and discussions follow categories of electrochemical double-layer capacitors (EDLCs), pseudocapacitors (PSCs), and hybrid supercapacitors (HSCs) for supercapacitors. In contrast, Li-ion batteries (LIBs), Lithium-sulfur batteries (LSBs), Lithium-oxygen batteries (LOBs), Sodium-ion batteries (SIBs), Sodium-sulfur batteries (SSBs), Zinc-ion batteries (ZIBs), Zinc-air batteries (ZABs), Aluminum-sulfur batteries (ASBs), and others (e.g., LiSe, NiZn, H⁺ , alkaline, organic, and redox flow batteries) are categorized for batteries.

One-Pot Synthesis of Porous Crystal Structured Nanosponge-Like Pristine Copper Metal-Organic Framework for Hybrid Supercapacitor Application

Hybrid supercapacitors are promising energy storage devices where high-power delivery is needed in continuous supply (like e-vehicles, cranes, industrialized machines, etc.). Metal-Organic Frameworks (MOFs) are the leading porous materials, and...

A Ni-MOF based luminescent sensor for selective and rapid sensing of Fe(ii) and Fe(iii) ions

In this work, a bis(N,N-trimellitoyl)-4,4′-oxydianiline linker was synthesized and characterized by spectroscopic techniques. The molecular structure and luminescence intensity of the Ni-MOF treated with different metal ions were investigated.

Facile assembly of 2D Ni-based coordination polymer nanosheets as battery-type electrodes for high-performance supercapacitors

Large-scale Ni-based nano-sized coordination polymers (Ni-nCPs) are facilely constructed by a self-assembled approach at room temperature and atmosphere pressure. In this strategy, we use only the environmentally friendly solvents of water and ethanol, and the synthesis of 2D Ni-nCPs via a self-assembly route appears close to the "green chemistry" concept. In addition, the morphologies of the Ni-nCPs can be easily adjusted by the water/ethanol ratio. Owing to its unique 2D ultrathin nature and large specific surface area, Ni-nCPs-1 achieves a great number of channels for the transport of electrons and ions and electrochemically redox active sites for a faradaic reaction. Therefore, battery-type Ni-nCPs-1 electrodes have a bright prospect in energy storage, and can reach an outstanding specific capacitance value as high as 1066.9 F g^-1 at 1 A g^-1. Additionally, the asymmetric supercapacitor (Ni-nCPs-1//active carbon) displays a high energy density of 47.9 W h kg^-1 at a power density of 440 W kg^-1 and an excellent long-term cycle stability. This work may open up a new path in advanced electrode materials for efficient and real-time energy storge applications.

Novel SeS2-loaded Co MOF with Au@PANI comprised electroanalytical molecularly imprinted polymer-based disposable sensor for patulin mycotoxin

An SeS₂-loaded Co MOF and Au@PANI nanocomposite comprising the base matrix of the electrode was developed with electropolymerized molecularly imprinted polymer (MIP) consisting of p-aminobenzoic acid (PABA) and patulin (PT) to detect PT molecules based on the PT imprinted cavities. SeS₂@Co MOF and Au@PANI were synthesized using hydrothermal synthesis and interfacial polymerization strategies, respectively. A suitable functional monomer to fabricate the MIP platform was selected using the density functional theory (DFT/M06-2X method). Higher electrochemical active surface area (0.985 cm² which is 6.99 times higher than the bare SPE) and a lower charge transfer resistance (R_ct = 27.8 Ω) at the MIP/Au@PANI/SeS₂@Co MOF electrode was achieved based on the higher number of adsorptive sites and enhanced conductivity (electron transfer rate constant (k_s = 3.24 × 10^-3 s^-1) of the sensing platform. The fabricated MIP sensor performance was studied in 10 mM PBS (pH = 6.4), where an improved detection limit (0.66 pM) for PT and a broad logarithmic linear dynamic range (0.001-100 nM) were both observed. The sensor possessed higher selectivity (Imprinting factor = 15.4 for PT), excellent reusability (%RSD of 10 cycles = 2.49%), high storage stability (6.7% lost after 35 days), and robust reproducibility (%RSD = 3.22%) The as-prepared MIP-based PT sensor was applied to detect PT in a real-time apple juice sample (10% diluted with PBS) with a recovery % ranging from 94.5 to 106.4%. The proposed sensor possesses great advantages in terms of cost-effectiveness, providing a simple detection strategy for long-term storage stability, and reversible cycle measurements.

Porous 3,4-di(3,5-dicarboxyphenyl)phthalate-based Cd2+ coordination polymer and its potential applications

Porous coordination polymers with organic aminium as one of the guest species possess a potential application in dye adsorption and white-light material manufacture. Polycarboxylic acid with multiple COOH substituents tends to form this type of porous material (with metal ion). Here the solvothermal self-assembly between Cd²⁺ and a hexacarboxylic acid creates such a porous material [(CH₃)₂NH₂]₆[Cd₃(L)₂]·5DMF·3H₂O (H₆L = 3,4-di(3,5-dicarboxyphenyl)phthalic acid) 1. Total potential guest accessible void volume in 3-D 1 is found to be 4327 Å³. Based on its better porous structure and stability, the ability of 1 to adsorb organic dyes is investigated. It has been proved that (i) 1 can selectively adsorb cationic dyes as Azure A (AA⁺) and/or Methylene Blue (MB⁺), rather than neutral and anionic ones; (ii) the maximum adsorption capacity is 698.2 mg·g^-1 for AA⁺ and 573.2 mg·g^-1 for MB⁺, respectively; and (iii) to the adsorption of AA⁺, it can be recycled for at least five rounds. Also, it is utilized to fabricate the while-light emitting material. Based on the blue-light emission of 1, the trace Eu³⁺ and Tb³⁺ ions are introduced into the pores of 1 successfully, obtaining a white-light emitting material Eu³⁺/Tb³⁺@1 (CIE chromaticity coordinates: (0.33, 0.32)). Meanwhile, Eu³⁺/Tb³⁺@1 is found to be a potential fluorescence photochromic material, showing a yellow-white-blue light emission. According to these investigations, the relationship between material structure and its adsorption property for dyes, the points that should be paid attention to in the construction of white-light emitting materials as well as the potential adsorption mechanism for dyes and rare earth ions are deeply discussed.