New Insights into the N-S Bond Formation of a Sulfurized-Polyacrylonitrile Cathode Material for Lithium-Sulfur Batteries

Reinforcing the Electrode/Electrolyte Interphases of Lithium Metal Batteries Employing Locally Concentrated Ionic Liquid Electrolytes

Lithium metal batteries (LMBs) with nickel-rich cathodes are promising candidates for next-generation high-energy-density batteries, but the lack of sufficiently protective electrode/electrolyte interphases (EEIs) limits their cyclability. Herein, trifluoromethoxybenzene is proposed as a cosolvent for locally concentrated ionic liquid electrolytes (LCILEs) to reinforce the EEIs. With a comparative study of a neat ionic liquid electrolyte (ILE) and three LCILEs employing fluorobenzene, trifluoromethylbenzene, or trifluoromethoxybenzene as cosolvents, it is revealed that the fluorinated groups tethered to the benzene ring of the cosolvents not only affect the electrolytes' ionic conductivity and fluidity, but also the EEIs' composition via adjusting the contribution of the 1-ethyl-3-methylimidazolium cation (Emim+ ) and bis(fluorosulfonyl)imide anion. Trifluoromethoxybenzene, as the optimal cosolvent, leads to a stable cycling of LMBs employing 5 mAh cm-2 lithium metal anodes (LMAs), 21 mg cm-2 LiNi0.8 Co0.15 Al0.05 (NCA) cathodes, and 4.2 µL mAh-1 electrolytes for 150 cycles with a remarkable capacity retention of 71%, thanks to a solid electrolyte interphase rich in inorganic species on LMAs and, particularly, a uniform cathode/electrolyte interphase rich in Emim+ -derived species on NCA cathodes. By contrast, the capacity retention under the same condition is only 16%, 46%, and 18% for the neat ILE and the LCILEs based on fluorobenzene and benzotrifluoride, respectively.

Lewis Acid Probe for Basicity of Sulfide Electrolytes Investigated by 11B Solid-State NMR

Sulfide-based solid-state lithium-ion batteries (SSLIB) have attracted a lot of interest globally in the past few years for their high safety and high energy density over the traditional lithium-ion batteries. However, sulfide electrolytes (SEs) are moisture-sensitive which pose significant challenges in the material preparation and cell manufacturing. To the best of our knowledge, there is no tool available to probe the types and the strength of the basic sites in sulfide electrolytes, which is crucial for understanding the moisture stability of sulfide electrolytes. Herein, we propose a new spectral probe with the Lewis base indicator BBr3 to probe the strength of Lewis basic sites on various sulfide electrolytes by 11B solid-state NMR spectroscopy (11B-NMR). The active sulfur sites and the corresponding strength of the sulfide electrolytes are successfully evaluated by the proposed Lewis base probe. The probed strength of the active sulfur sites of a sulfide electrolyte is consistent with the results of DFT (density functional theory) calculation and correlated with the H2S generation rate when the electrolyte was exposed in moisture atmosphere. This work paves a new way to investigate the basicity and moisture stability of the sulfide electrolytes.

Novel carbon nanozymes with enhanced phosphatase-like catalytic activity for antimicrobial applications

In this work, Sulfur and Nitrogen co-doped carbon nanoparticles (SN-CNPs) were synthesized by hydrothermal method using dried beet powder as the carbon source. TEM and AFM images indicated that these SN-CNPs form a round-shape ball with an approximate diameter of 50 nm. The presence of Sulfur and Nitrogen in these carbon-based nanoparticles was confirmed by FTIR and XPS analyses. These SN-CNPs were found to have strong phosphatase-like enzymatic activity. The enzymatic behavior of SN-CNPs follows the Michaelis-Menten mechanism with greater v_max and much lower K_m values compared to alkaline phosphatase. Their antimicrobial properties were tested on E. coli and L. lactis, with MIC values of 63 μg mL^-1 and 250 μg mL^-1, respectively. SEM and AFM images of fixed and live E. coli cells revealed that SN-CNPs strongly interacted with the outer membranes of bacterial cells, significantly increasing the cell surface roughness. The chemical interaction between SN-CNPs and phospholipid modeled using quantum mechanical calculations further support our hypothesis that the phosphatase and antimicrobial properties of SN-CNPs are due to the thiol group on the SN-CNPs, which is a mimic of the cysteine-based protein phosphatase. The present work is the first to report carbon-based nanoparticles with strong phosphatase activity and propose a phosphatase natured antimicrobial mechanism. This novel class of carbon nanozymes has the potential to be used for effective catalytic and antibacterial applications.

Insights into the Pseudocapacitive Behavior of Sulfurized Polymer Electrodes for Li-S Batteries

Practical applications of sulfurized polymer (SP) materials in Li-S batteries (LSBs) are often written off due to their low S content (≈35 wt%). Unlike conventional S₈ /C composite cathodes, SP materials are shown to function as pseudocapacitors with an active carbon backbone using a comprehensive array of tools including in situ Raman and electrochemical impedance spectroscopy. Critical metric analysis of LSBs containing SP materials with an active carbon skeleton shows that SP cathodes with 35 wt% S are suitable for 350 Wh kg^-1 target at the cell level if S loading >5 mg cm^-2 , electrolyte-to-sulfur ratio <2 µL mg^-1 , and negative-to-positive ratio <5 can be achieved. Although 3D current collectors can enable such high loadings, they often add excess mass decreasing the total capacity. An "active" carbon nanotube bucky sandwich current collector developed here offsets its excess weight by contributing to the electric double layer capacity. SP cathodes (35 wt% S) with ≈5.5 mg cm^-2 of S loading (≈15.8 mg cm^-2 of SP loading) yield a sulfur-level gravimetric capacity ≈1360 mAh g_s ^-1 (≈690 mAh g_s ^-1 ), electrode level capacity 200 mAh g_electrode ^-1 (100 mAh g_electrode ^-1 ), and areal capacity ≈7.8 mAh cm^-2 (≈4.0 mAh cm^-2 ) at 0.1C (1C) rate for ≈100 cycles at E/S ratio = 7 µL mg^-1 .

Structural Transformation in a Sulfurized Polymer Cathode to Enable Long-Life Rechargeable Lithium-Sulfur Batteries

Sulfurized polyacrylonitrile (SPAN) represents a class of sulfur-bonded polymers, which have shown thousands of stable cycles as a cathode in lithium-sulfur batteries. However, the exact molecular structure and its electrochemical reaction mechanism remain unclear. Most significantly, SPAN shows an over 25% 1st cycle irreversible capacity loss before exhibiting perfect reversibility for subsequent cycles. Here, with a SPAN thin-film platform and an array of analytical tools, we show that the SPAN capacity loss is associated with intramolecular dehydrogenation along with the loss of sulfur. This results in an increase in the aromaticity of the structure, which is corroborated by a >100× increase in electronic conductivity. We also discovered that the conductive carbon additive in the cathode is instrumental in driving the reaction to completion. Based on the proposed mechanism, we have developed a synthesis procedure to eliminate more than 50% of the irreversible capacity loss. Our insights into the reaction mechanism provide a blueprint for the design of high-performance sulfurized polymer cathode materials.

Multi-function hollow nanorod as an efficient sulfur host accelerates sulfur redox reactions for high-performance Li-S batteries

The "shuttle effect" of lithium polysulfides (LiPSs) leads to loss of active materials and the deterioration of cycle stability, which seriously restricts the practical progress of lithium-sulfur (Li-S) batteries. The diffusion of soluble discharge intermediate is the root cause of the above problems. Herein, we synthesized a porous organic framework material (HUT-8) based on triazine network, the polar groups above the hollow structure can not only adsorb LiPSs through electron donating effect, but also anchored cobalt (II) ions provide a large number of binding sites for the in-situ growth of CoS2. This ensured maximized exposure of catalytic centre and improve their interactions with sulfur redox species under the confinement of mesopores, which can catalytically accelerate capture/diffusion of LiPSs and precipitation/decomposition of Li2S. Based on the synergistic effect of the composite materials, the CoS2-HUT-8/S cathode maintained a capacity of 583 mAh g-1 after 500 cycles at 1 C, and a minimum capacity fading rate of 0.046% per cycle. A freestanding CoS2-HUT-8/S cathode with sulfur loading of 5.2 mg cm-2 delivered a high areal capacity of 4.01 mAh cm-2 under a lean electrolyte, which would provide great potential for the practical progress of Li-S batteries.

Dual additive of lithium titanate and sulfurized pyrolyzed polyacrylonitrile in sulfur cathode for high rate performance in lithium-sulfur battery

Lithium-Sulfur (Li-S) batteries have attracted much attention as next-generation batteries due to their high theoretical energy density. However, lithium polysulfide generated during the discharge loses intimate electrical contact with the carbon matrix due to its high solubility in the electrolyte, causing a high charge transfer resistance and slow redox kinetics for the discharge reactions, resulting in a low rate capability. A cathode additive having a strong chemical adsorbing site toward the polysulfide can effectively inhibit their dissolution. We now report a dual additive of lithium titanium oxide (LTO) and sulfurized polyacrylonitrile (SPAN). LTO provides a rapid charge transfer and a fast Li⁺ ion transfer in the cathode. On the other hand, SPAN helps to enhance the polysulfide adsorption capability. This dual additive system synergistically supplies the cathode with a strong polysulfide adsorption capability and fast redox kinetics. As a result, the dual additive exhibits high discharge capacities of 1430 mA h g^-1 at 0.1C and 1200 mA h g^-1 at 0.5C at the high-sulfur-loading cathode of 5.0 mg cm^-2. Our findings demonstrated the manufacturing of the cathode with a strong polysulfide adsorption capability and a fast redox reaction which could then effectively improve the rate performance of the Li-S batteries.

Locally Concentrated Ionic Liquid Electrolyte with Partially Solvating Diluent for Lithium/Sulfurized Polyacrylonitrile Batteries

The development of Li/sulfurized polyacrylonitrile (SPAN) batteries requires electrolytes that can form stable electrolyte/electrode interphases simultaneously on lithium-metal anodes (LMAs) and SPAN cathodes. Herein, a low-flammability locally concentrated ionic liquid electrolyte (LCILE) employing monofluorobenzene (mFBn) as the diluent is proposed for Li/SPAN cells. Unlike non-solvating diluents in other LCILEs, mFBn partially solvates Li⁺ , decreasing the coordination between Li⁺ and bis(fluorosulfonyl)imide (FSI^- ). In turn, this triggers a more substantial decomposition of FSI^- and consequently results in the formation of a solid electrolyte interphase (SEI) rich in inorganic compounds, which enables a remarkable Coulombic efficiency (99.72%) of LMAs. Meanwhile, a protective cathode electrolyte interphase (CEI), derived mainly from FSI^- and organic cations, is generated on the SPAN cathodes, preventing the dissolution of polysulfides. Benefiting from the robust interphases simultaneously formed on both the electrodes, a highly stable cycling of Li/SPAN cells for 250 cycles with a capacity retention of 71% is achieved employing the LCILE and only 80% lithium-metal excess.

Low-voltage-hysteresis aluminum-sulfur battery with covalently functionalized mesoporous graphene

A pyridyl-functionalized mesoporous graphene is developed to accommodate sulfur for Al-S batteries, which can significantly reduce the voltage hysteresis to ∼0.43 V. The reaction kinetics of the Al-S battery are accelerated by the catalyst-free carbon host, ascribed to both the mesoporous graphene structure and the covalently functionalized pyridyl groups.

Constructing Binder- and Carbon Additive-Free Organosulfur Cathodes Based on Conducting Thiol-Polymers through Electropolymerization for Lithium-Sulfur Batteries

Herein, the concept of constructing binder- and carbon additive-free organosulfur cathode was proved based on thiol-containing conducting polymer poly(4-(thiophene-3-yl) benzenethiol) (PTBT). The PTBT featured the polythiophene-structure main chain as a highly conducting framework and the benzenethiol side chain to copolymerize with sulfur and form a crosslinked organosulfur polymer (namely S/PTBT). Meanwhile, it could be in-situ deposited on the current collector by electro-polymerization, making it a binder-free and free-standing cathode for Li-S batteries. The S/PTBT cathode exhibited a reversible capacity of around 870 mAh g^-1 at 0.1 C and improved cycling performance compared to the physically mixed cathode (namely S&PTBT). This multifunction cathode eliminated the influence of the additives (carbon/binder), making it suitable to be applied as a model electrode for operando analysis. Operando X-ray imaging revealed the remarkable effect in the suppression of polysulfides shuttle via introducing covalent bonds, paving the way for the study of the intrinsic mechanisms in Li-S batteries.

Polymers in Lithium-Sulfur Batteries

Lithium-sulfur batteries (LSBs) hold great promise as one of the next-generation power supplies for portable electronics and electric vehicles due to their ultrahigh energy density, cost effectiveness, and environmental benignity. However, their practical application has been impeded owing to the electronic insulation of sulfur and its intermediates, serious shuttle effect, large volume variation, and uncontrollable formation of lithium dendrites. Over the past decades, many pioneering strategies have been developed to address these issues via improving electrodes, electrolytes, separators and binders. Remarkably, polymers can be readily applied to all these aspects due to their structural designability, functional versatility, superior chemical stability and processability. Moreover, their lightweight and rich resource characteristics enable the production of LSBs with high-volume energy density at low cost. Surprisingly, there have been few reviews on development of polymers in LSBs. Herein, breakthroughs and future perspectives of emerging polymers in LSBs are scrutinized. Significant attention is centered on recent implementation of polymers in each component of LSBs with an emphasis on intrinsic mechanisms underlying their specific functions. The review offers a comprehensive overview of state-of-the-art polymers for LSBs, provides in-depth insights into addressing key challenges, and affords important resources for researchers working on electrochemical energy systems.

Graphdiyne-like Porous Organic Framework as a Solid-Phase Sulfur Conversion Cathodic Host for Stable Li-S Batteries

As a unique branch of Li-S batteries, solid-phase sulfur conversion polymer cathodes have shown superior stability with fast ion-transfer kinetics and high discharge capacities owing to the mere existence of short-chain sulfur species during charging/discharging. However, representative compounds such as sulfurized polyacrylonitrile (SPAN) and polyaniline (SPANI) suffer from low sulfur contents and poor cycling performances under large current densities due to the sulfurization occurring only on polymers' surface. Here, a graphdiyne-like porous organic framework, denoted as GPOF, is synthesized and used as a host for enabling solid-phase sulfur conversion. Plenty of unsaturated bonds in GPOF provide sufficient reaction sites to bind sulfur chains, resulting in a high active sulfur content in the cathode. Moreover, the microporous GPOF possesses suitable cavities to accommodate the volume expansion, leading to favorable long-term cycling stability. As a result, the sulfurized GPOF cathode (SGPOF-320) displays outstanding electrochemical stability with negligible capacity decline after 250 cycles at 0.2 C with an average discharge capacity of 925 mA h g^-1. Our work applies a facile procedure to produce sulfur conversion porous polymer cathodes, which could provide a proper way for exploring more suitable cathode materials for high-performance Li-S batteries.

Three-Dimensional Engineering of Sulfur/MnO2 Composites for High-Rate Lithium-Sulfur Batteries

Herein, a three-dimensional interconnected sulfur (3DIS) system is used to construct a cathode of the lithium-sulfur battery. Compared with the traditional methods of encapsulating sulfur, the 3DIS system serves as a framework to grow MnO₂, which ensures a high sulfur content of 91.5 wt % (the ratio of sulfur/host was 10.8) and a uniform distribution of sulfur. Due to the synergistic effect of the 3D interconnected architecture and the uniform coating layer of polar MnO₂, 3DIS@MnO₂ (3DISMO) delivers a capacity of 891 mA h g^-1 after 900 cycles at 1 C. Even at a rate of 10 C, a capacity decay rate of 0.061% per cycle is achieved.