Thin-Film Nanocomposite Membrane Incorporated with Porous Zn-Based Metal-Organic Frameworks: Toward Enhancement of Desalination Performance and Chlorine Resistance

Thin-Film Composite Polyamide Membranes Modified with HKUST-1 for Water Treatment: Characterization and Nanofiltration Performance

The development of sustainable nanofiltration membranes requires alternatives to petroleum-derived polymer substrates. This study demonstrates the successful use of an eco-friendly cellulose acetate/cellulose nitrate (CA/CN) blend substrate for fabricating high-performance modified thin-film composite (mTFC) membranes. A dense, non-porous polyamide (PA) selective layer was formed via the interfacial polymerization method and modified with 0.05-0.1 wt.% HKUST-1 (Cu3BTC2, MOF-199). Characterization by FTIR, XPS, SEM, AFM, and contact angle measurements confirmed the CA/CN substrate's suitability for TFC membrane fabrication. HKUST-1 incorporation created a distinctive ridge-and-valley morphology while significantly altering PA layer hydrophilicity and roughness. The mTFC membrane performance could be fine-tuned by the controlled incorporation of HKUST-1; incorporation through the aqueous phase slowed down the formation of the PA layer and significantly reduced its thickness, while the addition through the organic phase resulted in the formation of a denser layer due to HKUST-1 agglomeration. Thus, either enhanced permeability (123 LMH bar-1 with 0.05 wt.% aqueous-phase incorporation) or rejection (>89% dye removal with 0.05 wt.% organic-phase incorporation) were achieved. Both mTFC membranes also exhibited improved heavy metal ion rejection (>91.7%), confirming their industrial potential. Higher HKUST-1 loading (0.1 wt.%) caused MOF agglomeration, reducing performance. This approach establishes a sustainable fabrication route for tunable TFC membranes targeting specific separation tasks.

Polyvinyl Alcohol-Based Membranes: A Review of Research Progress on Design and Predictive Modeling of Properties for Targeted Application

This review provides a comprehensive evaluation of the current state of polyvinyl alcohol (PVA)-based membranes, emphasizing their significance in membrane technology for various applications. The analysis encompasses both experimental and theoretical research articles, with a focus on recent decades, aiming to elucidate the potential and limitations of different fabrication approaches, structure-property relationships, and their applicability in the real world. The review begins by examining the advanced polymeric materials and strategies employed in the design and processing of membranes with tailored properties. Fundamental principles of membrane processes are introduced, with a focus on general modeling approaches for describing the fluid transport through membranes. A key aspect of discussion is the distinction between the membrane performance and process performance. Additionally, an in-depth analysis of PVA membranes in various applications is presented, particularly in environmental fields (e.g., fuel cell, water treatment, air purification, and food packaging) and biomedical domains (e.g., drug delivery systems, wound healing, tissue engineering and regenerative medicine, hemodialysis and artificial organs, and ophthalmic and periodontal treatment). Special attention is given to the relationship between membranes' characteristics, such as material composition, structure, and processing parameters, and their overall performance, in terms of permeability, selectivity, and stability. Despite their promising properties, enhanced through innovative fabrication methods that expand their applicability, challenges remain in optimizing long-term stability, improving fouling resistance, and increasing process scalability. Therefore, further research is needed to develop novel modifications and composite structures that overcome these limitations and enhance the practical implementation of PVA-based membranes. By offering a systematic overview, this review aims to advance the understanding of PVA membrane fabrication, properties, and functionality, providing valuable insights for continued development and optimization in membrane technology.

Bioinspired Zn-MOF doped radial porous chitosan-based sponge with antibacterial and antioxidant properties for rapid hemostasis and wound healing

Herein, a novel bioinspired radial porous zinc-based metal-organic framework (Zn-MOF) doped sodium alginate/chitosan derivatives/pullulan-based SA/PSCS/Pul/Zn-MOF (SPCP/Zn) composites sponge with excellent antioxidant and antibacterial properties was fabricated by the ice-templating method. Boric acid (BA) and Ca2+, which were respectively used as hydrogen- and ionic- bonding cross-linkers, provided strong mechanical properties for sponge matrix composed of SA, PSCS, and Pul. The obtained SPCP/Zn sponge exhibited uniform porous morphology, proper hydrophilicity, and admirable biocompatibility. In addition, the SPCP/Zn sponge achieved a sustained release of Zn2+ and gallic acid, which displayed powerful antibacterial and antioxidant activities. Importantly, the SPCP/Zn sponge exhibited shorter rapid hemostasis (20.4 ± 2.9 s) and lower blood loss (19.8 ± 4.3 mg). The SPCP/Zn sponge also showed faster wound closure ratio for the rat full-thickness skin defect model. It was revealed that SPCP/Zn sponge could significantly accelerate and enhance wound healing through downregulating inflammatory cytokines (TNF-α, IL-6) and increasing the expression of growth factors (VEGF). Due to its excellent properties, the SPCP/Zn sponge may have promising potential in wound healing applications.

A review on artificial water channels incorporated polyamide membranes for water purification: Transport mechanisms and performance

While thin-film composite (TFC) polyamide (PA) membranes are advanced for removing salts and trace organic contaminants (TrOCs) from water, TFC PA membranes encounter a water permeance-selectivity trade-off due to PA layer structural characteristics. Drawing inspiration from the excellent water permeance and solute rejection of natural biological channels, the development of analogous artificial water channels (AWCs) in TFC PA membranes (abbreviated as AWCM) promises to achieve superior mass transfer efficiency, enabling breaking the upper bound of water permeance and selectivity. Herein, we first discussed the types and structural characteristics of AWCs, followed by summarizing the methods for constructing AWCM. We discussed whether the AWCs acted as the primary mass transfer channels in AWCM and emphasized the important role of the AWCs in water transport and ion/TrOCs rejection. We thoroughly summarized the molecular-level mechanisms and structure-performance relationship of water molecules, ions, and TrOCs transport in the confined nanospace of AWCs, which laid the foundation for illustrating the enhanced water permeance and salt/TrOCs selectivity of AWCM. Finally, we discussed the challenges encountered in the field of AWCM and proposed future perspectives for practical applications. This review is expected to offer guidance for understanding the transport mechanisms of AWCM and developing next-generation membrane for effective water treatment.

A sustainable approach for the removal of pharmaceutical contaminants from effluent using polyamide thin-film composite membranes integrated with Zn-based metal organic frameworks

This study addresses the significant concern of pharmaceutical contaminants, including antipyretic and antibiotic drugs, in municipal and industrial wastewater, impacting both the environment and human health. We investigate incorporating zinc-based metal-organic framework (Zn-MOF) nanofillers into polyamide layers, developing thin-film composite (PA-TFC) nanofiltration membranes via interfacial polymerization to remove paracetamol, ibuprofen, and amoxicillin from simulated wastewater. Characterization confirms Zn-MOF's presence in the PA-TFC membrane, affecting structural topology, pore size, contact angles, and zeta potential. Zn-MOF nanofillers strongly adhere to the polyamide layer, influencing membrane surface chemistry and morphology. The newly developed MOF/PA-TFC nanofiltration membranes demonstrate a remarkable water flux of up to 35 LMH, showcasing superior removal efficiency for the three pharmaceutical contaminants when compared to PA-TFC membranes. Specifically, the rejection rates for paracetamol, ibuprofen, and amoxicillin are notably high at 93%, 98%, and 99%, respectively. Consequently, this study establishes MOF/PA-TFC nanofiltration membranes as a highly efficient solution for removing emerging pharmaceutical contaminants from environmental water, promoting sustainability and safeguarding water resources.

Thin-Film Nanocomposite (TFN) Membranes for Water Treatment Applications: Characterization and Performance

Thin-film nanocomposite (TFN) membranes have been widely investigated for water treatment applications due to their promising performance in terms of flux, salt rejection, and their antifouling properties. This review article provides an overview of the TFN membrane characterization and performance. It presents different characterization techniques that have been used to analyze these membranes and the nanofillers within them. The techniques comprise structural and elemental analysis, surface and morphology analysis, compositional analysis, and mechanical properties. Additionally, the fundamentals of membrane preparation are also presented, together with a classification of nanofillers that have been used so far. The potential of TFN membranes to address water scarcity and pollution challenges is significant. This review also lists examples of effective TFN membrane applications for water treatment. These include enhanced flux, enhanced salt rejection, antifouling, chlorine resistance, antimicrobial properties, thermal stability, and dye removal. The article concludes with a synopsis of the current status of TFN membranes and future perspectives.

Nanofiltration Mixed Matrix Membranes from Cellulose Modified with Zn-Based Metal–Organic Frameworks for the Enhanced Water Treatment from Heavy Metal Ions

Nowadays, nanofiltration is actively used for water softening and disinfection, pre-treatment, nitrate, and color removal, in particular, for heavy metal ions removal from wastewater. In this regard, new, effective materials are required. In the present work, novel sustainable porous membranes from cellulose acetate (CA) and supported membranes consisting of CA porous substrate with a thin dense selective layer from carboxymethyl cellulose (CMC) modified with first-time synthesized Zn-based metal–organic frameworks (Zn(SEB), Zn(BDC)Si, Zn(BIM)) were developed to increase the efficiency of nanofiltration for the removal of heavy metal ions. Zn-based MOFs were characterized by sorption measurements, X-ray diffraction (XRD), and scanning electron microscopy (SEM). The obtained membranes were studied by the spectroscopic (FTIR), standard porosimetry and microscopic (SEM and AFM) methods, and contact angle measurement. The CA porous support was compared with other, prepared in the present work, porous substrates from poly(m-phenylene isophthalamide) and polyacrylonitrile. Membrane performance was tested in the nanofiltration of the model and real mixtures containing heavy metal ions. The improvement of the transport properties of the developed membranes was achieved through Zn-based MOF modification due to their porous structure, hydrophilic properties, and different particle shapes.

A resonant energy transfer electrochemiluminescence immunosensor based on low trigger potential of Zn-metal organic framework and CoOOH nanosheets for 5-fluorouracil detection

The organic luminophores have inspired widespread interest in electrochemiluminescence (ECL). Herein, a novel rod-like metal-organic framework was formed by chelating Zn ion with 9,10-di(p-carboxyphenyl)-anthracene (DPA), defined as Zn-MOF for simplicity. In this proposal, the prepared Zn-MOF was first used as a powerful organic luminophore with low trigger potential, thus developing a competitive ECL immunoassay for ultrasensitive detection of 5-fluorouracil (5-FU) with 1,4-diazabicyclo[2.2.2]octane (D-H₂) as the coreactant. The absorption spectrum of cobalt oxyhydroxide (CoOOH) nanosheets and the ECL emission spectrum of Zn-MOF could be highly matched, which ensured the occurrence of resonance energy transfer (RET). For that, ECL-RET was applied in the assembly strategy of the ECL biosensor, and Zn-MOF was used as the energy donor and CoOOH nanosheets as the acceptor. Taking advantage of the luminophore and ECL-RET, the immunoassay can be used for ultra-sensitive quantitative detection of 5-fluorouracil. The proposed ECL-RET immunosensor showed satisfactory sensitivity and accuracy with a wider linear range from 0.001 to 1000 ng/mL, and a lower detection limit (0.52 pg/mL). Hence, it is worth believing that this strategy can pave a bright research direction for the detection of 5-FU or other biological small molecules.

Roles and gains of coordination chemistry in nanofiltration membrane: A review

The nanofiltration (NF) membranes with the specific separation accuracy for molecules with the size of 0.5-2 nm have been applied in various industries. However, the traditional polymeric NF membranes still face problems like the trade-off effect, organic solvent consumption, and weak durability in harsh conditions. The participation of coordination action or metal-organic coordination compounds (MOCs) brings the membrane with uniform pores, better antifouling properties, and high hydrophilicity. Some of the aqueous-phase reactions also help to introduce a green fabrication process to NF membranes. This review critically summarizes the recent research progress in coordination chemistry relevant NF membranes. The participation of coordination chemistry was classified by the various functions in NF membranes like additives, interlayers, selective layers, coating layers, and cross-linkers. Then, the effect and mechanism of the coordination chemistry on the performance of NF membranes are discussed in depth. Perspectives are given for the further promotion that coordination chemistry can make in NF processes. This review also provides comprehensive insight and constructive guidance on high-performance NF membranes with coordination chemistry.

Construction and Chlorine Resistance of Thiophene-Poly(ethyleneimine)-Based Dual-Functional Nanofiltration Membranes

The demand to improve the chlorine resistance of polyamide (PA) membranes is escalated with greater amounts of chlorine-containing disinfectant being used in global water treatment during the COVID-19 pandemic. In this work, we designed thiophene-functionalized poly(ethyleneimine) (TPEI) materials first and grafted them onto a conventional PA membrane to develop novel nanofiltration membranes (PEI-M, TPEI-1-M, TPEI-2-M). These membranes have dual-functionalized selective surfaces covered by hydrophilic amino groups and electron-rich thiophene moieties, which endow these membranes with superior chlorine resistance and improved separation performance. The modified membranes increase the rejection of MgCl2 from 86.5% of the nascent PA membrane (PA-M) to higher than 93.0% without sacrificing the membrane water permeability. More stable separation performance is achieved with all of the as-prepared membranes than PA-M after exposure to a 2000 ppm sodium hypochlorite solution. TPEI-2-M outperforms other membranes after being treated in a chlorination intensity of 16,000 ppm·h with the smallest flux loss and the highest MgCl2 rejection. This is mainly ascribed to the highest amount of amino and thiophene moieties on the TPEI-2-M surface. This study provides an effective protocol for developing novel PA-based nanofiltration membranes while demonstrating its superiority over current technologies with exceptional separation performance and antichlorine ability.

Largely Entangled Diamondoid Framework with High-Density Urea and Divergent Metal Nodes for Selective Scavenging of CO2 and Molecular Dimension-Mediated Size-Exclusive H-Bond Donor Catalysis

Pore environment modulation with high-density polarizing groups in metal-organic frameworks (MOFs) can effectively accomplish selective and multicyclic carbon dioxide (CO₂) adsorption, whereas the incorporation of task-specific organic sites inside these porous vessels promise to evade self-quenching, solubility, and recyclability issues in hydrogen-bond donating (HBD) catalysis. However, concurrent amalgamation of both these attributes over a single platform is rare but extremely demanding in view of sustainable applications. We designed a robust diamondoid framework CSMCRI-17 (CSMCRI = Central Salt and Marine Chemicals Research Institute) from the mixed-ligand assembly of azo group-containing dicarboxylate ligand, urea-functionalized pyridyl linker, and Zn(II) nodes with specific divergent coordination. Seven-fold interpenetration to the microporous structure largely augments N-rich functionality that facilitates high CO₂ uptake in the activated form (17a) with good CO₂ selectivity over N₂ and CH₄ that outperform many reported materials. The framework displays very strong CO₂ affinity and no reduction in adsorption capacity over multiple uptake-release cycles. Benefitting from the pore-wall decoration with urea functionality from the pillaring strut, 17a further demonstrates hydrogen-bond-mediated Friedel-Crafts alkylation of indole with β-nitrostyrene under mild conditions, with multicyclic usability and excellent reactivity toward wide ranges of substituted nucleophiles and electrophiles. Interestingly, interpenetration-generated optimum-sized pores induce poor conversion to sterically encumbered substrate via molecular dimension-mediated size selectivity that is alternatively ascribed from additional control experiments and support the occurrence of HBD reaction within the MOF cavity. The catalytic path is detailed in light of the change of emission intensity of the framework by the electrophile as well as the judicious choice of the substrate, which authenticates the prime role of urea moiety-governed two-point hydrogen bonding.

Design of a new polyethersulfone nanofiltration membrane with anti-fouling properties using supported protic ionic liquid modification for dye/salt removal

Facile techniques to fabricate the nanofiltration membranes with ideal molecular sieving is one of the most interesting subjects in membrane separation technology. In this study, the application of modified graphene oxide (GO) with triethylenetetramine (TETA), CuFe₂ O₄ , and acetic acid (AC) (supported GO-TETA-CuFe₂ O₄ @AC) as a supported protic ionic liquid (PIL) modifier for polyethersulfone (PES) membrane was evaluated to approve the improvement of anti-fouling properties and wastewater rejection of the fabricated membranes. To enhance the key properties of graphene oxide, it was modified by hydrophilic nanomaterials (TETA-CuFe₂ O₄ ). High flux and promising flux recovery ratio (up to 95% compared to the unmodified membrane) can be observed in the modified membranes. The modified membranes by GO-TETA-CuFe₂ O₄ @AC were studied at optimum concentrations (0.5 wt.%) for salt rejection and different dyes. The obtained data indicated that the modified membranes by GO-TETA-CuFe₂ O₄ @AC indicated higher salt removal (up to 97% for BaCl₂ than the unmodified membrane), which was related to the efficient modification. The obtained pure water flux (PWF) for bare and optimal modified membrane from 13.11 to 27.87 kg/m² ·h, respectively. To exact evaluate the effect of membrane modification on performance examination, the modified membranes were evaluated for chlorine resistance testing. This study aimed to develop cost-effective nanofiltration (NF) membranes with high anti-fouling properties and to determine the maximum filtration capacity of in-time dyes and salts in effluents. PRACTITIONER POINTS: A GO-TETA-CuFe2O4 mixed matrix membrane was prepared for removal of salts and dyes. The effect of GO-TETA-CuFe2O4 enhanced the hydrophilicity and porosity. The membrane exhibited superior antifouling properties and ions rejection.

Enhancing Stability of Tannic Acid-FeIII Nanofiltration Membrane for Water Treatment: Intercoordination by Metal-Organic Framework

Tannic acid (TA)-Fe^III nanofiltration (NF) membrane has been demonstrated to possess more favorable removal of trace organic contaminants (TrOCs) over the conventional polyamide NF membrane. However, the drawback of acid instability severely hinders the practical application of TA-Fe^III NF membrane in the treatment of (weak) acidic wastewater containing TrOCs (e.g., pharmaceutical wastewater, surface water, and drinking water). Herein, we introduced the MIL-101(Cr) nanoparticle, a kind of metal-organic framework (MOF), into the TA-Fe^III selective layer to enhance the membrane acid stability. The acid-tolerance parameter of MIL-101(Cr)-stabilized TA-Fe^III membrane (TA-Fe^III-MOF membrane, 12,000 ppm/s^-1) was two orders of magnitude larger than that of the TA-Fe^III membrane (50 ppm/s^-1), and the TA-Fe^III-MOF membrane can withstand acid treatment at pH = 4 for more than 30 days. Meanwhile, the TA-Fe^III-MOF membrane displayed increased water permeance from 9.5 to 12.7 L/(m²·h·bar) after the MOF addition, without compromising the selectivity. The enhanced acid stability for the TA-Fe^III-MOF membrane was ascribed to an intercoordination mechanism, where Fe^III centers (from TA-Fe^III complex) coordinated with -COOH groups (from terephthalic acid of MOF) and Cr^III centers (from MOF) coordinated with -OH groups (from TA of TA-Fe^III complex), which was verified by the density functional theory calculation. This study highlights a new approach for the development of a TA-Fe^III-based NF membrane with markedly enhanced acid stability, which is important for its real application in wastewater treatment and water reuse.

Nano/microplastics: Fragmentation, interaction with co-existing pollutants and their removal from wastewater using membrane processes

NANO: and microplastic (NP/MP) is one of the most challenging types of micropollutants, coming from either direct release or degradation of plastic items into ecosystems. NP/MP can adsorb hazardous pollutants (such as heavy metals and pharmaceutical compounds) and pathogens onto their surface that are consumed by humans, animals, and aquatic living organisms. This paper presents the interaction of NP/MP with other pollutants in the water environment and mechanisms involved to enable the ultimate fate of NP/MP as well as the effectiveness of metal-organic frame (MOF)-based membrane over conventional membrane processes for NP/MP removal. It is found that conventional membranes could remove MPs when their size is usually more than 1000 nm, but they are ineffective in removing NPs. These NPs have potentially greater health impacts due to their greater surface area. MOF-based membrane could effectively remove both NP and MP due to its large porous structure, high adsorption capacity, and low density. This paper also discusses some challenges associated with MOF-based membranes for NP/MP removal. Finally, we conclude a specific MOF-based ultrafiltration membrane (ED-MIL-101 (Cr)) that can potentially remove both negative and positive charged NP/MP from wastewater by electrostatic attraction and repulsion force with efficient water permeability.

Loosely Sandwich-Structured Membranes Decorated with UiO-66-NH2 for Efficient Antibiotic Separation and Organic Solvent Resistance

Thin-film nanocomposite (TFN) membranes with efficient molecular separation and organic solvent resistance are active in demand in wastewater treatment and resource reclamation, meeting the goal of emission peaks and carbon neutrality. In this work, a simple and rational design strategy has been employed to construct a sandwich-structured membrane for removing fluoroquinolone antibiotics and recycling organic solvents. The sandwich-structured membrane is composed of a porous substrate, a hydrophilic tannic acid-polyethyleneimine (TA-PEI) interlayer, and a polyamide (PA) selective layer decorated with metal-organic framework (PA-MOF). Results manifest that the hydrophilic TA-PEI interlayer played a bridging and gutter effect to achieve effective control in amide storage, amine diffusion, and nanomaterial downward leakage at the immiscible interface. The PA-MOF selective layer has been changed to a loosely crumpled surface, endowing functionalities on the sandwich-structured membrane that included limited pores, strengthened electronegativity, and stronger hydrophilicity. Thus, an enhanced water flux of 87.23 ± 7.43 LMH was achieved by the TFN-2 membrane (0.04 mg·mL^-1 UiO-66-NH₂), which is more than five times that of the thin-film composite membrane (17.46 ± 3.88 LMH). The rejection against norfloxacin, ciprofloxacin, and levofloxacin is 92.94 ± 1.60%, 94.62 ± 1.29%, and 96.92 ± 1.05%, respectively, effectively breaking through the "trade-off" effect between membrane permeability and rejection efficiency. Further antifouling results showed that the sandwich-structured membrane had lower flux decay ratios (3.36∼7.07%) and higher flux recovery ratios (93.40∼98.40%), as well as superior long-term stability after 30 days of filtration. Moreover, organic solvent resistance testing confirms that the sandwich-structured membrane maintained stable solvent flux and better recovery rates in ethanol, acetone, isopropanol, and N,N-dimethylformamide. Detailed nanofiltration mechanism studies revealed that these outstanding performances are based on the joint effect of the TA-PEI interlayer and PA-MOF selective layer, proposing a new perspective to break through the bottleneck of nanofiltration application in a complex environment.

Selective and Multicyclic CO2 Adsorption with Visible Light-Driven Photodegradation of Organic Dyes in a Robust Metal-Organic Framework Embracing Heteroatom-Affixed Pores

Pore environment modulation with polarizing groups is one of the essential prerequisites for selective carbon dioxide (CO₂) adsorption in metal-organic frameworks (MOFs), wherein judicious installation of the photocatalytic feature can promise visible light-triggered degradation of toxic organic dye molecules. However, astute amalgamation of both these attributes over a single MOF is rather rare, yet much anticipated in view of sustainable applications. Pore engineering is effectively harnessed in a Zn(II)-based three-dimensional (3D) MOF, CSMCRI-16 (CSMCRI = Central Salt and Marine Chemicals Research Institute), through mixed-ligand assembly of a N-rich linker (L), 4,4'-oxybis(benzoic acid) (H₂oba) ligand, and [Zn₂(CO₂)₄N₂] paddle-wheel secondary building units (SBUs). The noninterpenetrated structure contains unbound nitrogen and accessible oxygen atom-decorated porous channels and exhibits admirable stability in diverse organic solvents, open air, and at elevated temperatures. The heteroatom-decorated porous channels facilitated excellent CO₂ uptake in the activated MOF (16a) with high selectivity over N₂ (CO₂/N₂: 155.3) at 273 K. The framework further exhibits reasonable CO₂ affinity and multicyclic CO₂ sorption recurrence without a significant loss in the uptake capacity. Benefitting from the presence of the [Zn₂(CO₂)₄N₂] cluster in conjugation with π-conjugated organic ligands, the extended 3D network revealed an optical band gap energy of 2.55 eV, which makes the MOF an efficient photocatalyst toward the degradation of the cationic dyes crystal violet (CV) and methylene blue (MB) in the presence of a simple 40 W visible light lamp without any assistance of external oxidants. The catalyst exhibits multicyclic performance and short reaction time in addition to the fact that catalytic efficiencies (CV: 97.2%, MB: 97.8%) are comparable to those of contemporary materials.

Framework-promoted charge transfer for highly selective photoelectrochemical biosensing of dopamine

Traditional photoelectrochemical (PEC) systems with inorganic semiconductors as photoactive materials generally involve effortless recombination of electron-hole pairs, which greatly limit the detection sensitivity. The arrangement of multiple components with tunable bandgaps provides an effective way to accelerate charge transfer. In this work, a framework material with adjustable structure was used to promote the charge transfer in the PEC process. The framework was constructed with 9,10-di(p-carboxyphenyl)anthracene (DPA) ligands as the light collector to coordinate with Zn²⁺ nodes, which formed an electronegative metal-organic framework (ZnMOF), and showed good conductivity and PEC performance due to the π-π stacking of DPA and the intrareticular charge transfer. Based on the band and charge matching of dopamine (DA) with ZnMOF, the ZnMOF modified electrode as a biosensor showed excellent PEC response to DA with good selectivity, thus realized sensitive detection of DA ranging from 0.03 to 10 μM with a detection limit of 17.7 nM. The biosensor could be used to monitor the release of DA from PC12 cells and evaluate the stimulation of K⁺ to DA release. The conductive framework material provided an approach to develop highly selective sensing platform for trace bioanalysis.

Recent Advancements in Polyphenylsulfone Membrane Modification Methods for Separation Applications

Polyphenylsulfone (PPSU) membranes are of fundamental importance for many applications such as water treatment, gas separation, energy, electronics, and biomedicine, due to their low cost, controlled crystallinity, chemical, thermal, and mechanical stability. Numerous research studies have shown that modifying surface properties of PPSU membranes influences their stability and functionality. Therefore, the modification of the PPSU membrane surface is a pressing issue for both research and industrial communities. In this review, various surface modification methods and processes along with their mechanisms and performance are considered starting from 2002. There are three main approaches to the modification of PPSU membranes. The first one is bulk modifications, and it includes functional groups inclusion via sulfonation, amination, and chloromethylation. The second is blending with polymer (for instance, blending nanomaterials and biopolymers). Finally, the third one deals with physical and chemical surface modifications. Obviously, each method has its own limitations and advantages that are outlined below. Generally speaking, modified PPSU membranes demonstrate improved physical and chemical properties and enhanced performance. The advancements in PPSU modification have opened the door for the advance of membrane technology and multiple prospective applications.

Novel Mixed Matrix Membranes Based on Polyphenylene Oxide Modified with Graphene Oxide for Enhanced Pervaporation Dehydration of Ethylene Glycol

Ethylene glycol (EG) is widely used in various economic and industrial fields. The demand for its efficient separation and recovery from water is constantly growing. To improve the pervaporation characteristics of a poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) membrane in dehydration of ethylene glycol, the modification with graphene oxide (GO) nanoparticles was used. The effects of the introduction of various GO quantities into the PPO matrix on the structure and physicochemical properties were studied by Fourier-transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopies, scanning electron (SEM) and atomic force (AFM) microscopies, thermogravimetric analysis (TGA), swelling experiments, and contact angle measurements. Two types of membranes based on PPO and PPO/GO composite were developed: dense membranes and supported membranes on a fluoroplast substrate (MFFC). Transport properties of the developed membranes were evaluated in the pervaporation dehydration of EG in a wide concentration range (10–90 wt.% and 10–30 wt.% water for the dense and supported membranes, respectively). The supported PPO/GO(0.7%)/MFFC membrane demonstrated the best transport properties in pervaporation dehydration of EG (10–30 wt.% water) at 22 °C: permeation flux ca. 15 times higher compared to dense PPO membrane—180–230 g/(m²·h)), 99.8–99.6 wt.% water in the permeate. The membrane is suitable for the promising industrial application.