Homogeneous and Fast Li-Ion Transport Enabled by a Novel Metal-Organic-Framework-Based Succinonitrile Electrolyte for Dendrite-Free Li Deposition

Advanced Alkali Metal Batteries Based on MOFs and Their Composites

The integration of metal-organic frameworks (MOFs) with functional materials has established a versatile platform for a wide range of energy storage applications. Due to their large specific surface area, high porosity, and tunable structural properties, MOFs hold significant promise as components in energy storage systems, including electrodes, electrolytes, and separators for alkali metal-ion batteries (AIBs). Although lithium-ion batteries (LIBs) are widely used, their commercial graphite anode materials are nearing their theoretical capacity limits, and the scarcity of lithium and cobalt resources increases costs. Although zinc-ion batteries (ZIBs) suffer from limited cycling stability, they are attractive for their low cost, high capacity, and excellent safety. Meanwhile, potassium-ion (PIBs) and sodium-ion batteries (SIBs) show promise due to their affordability and abundant resources, but they encounter issues such as short cycle life and low energy density. This review outlines the applications of MOF composites in LIBs, SIBs, and ZIBs, introduces common synthesis methods, and forecasts future development directions and challenges in energy storage applications. We emphasize how the understanding can lay the foundation for developing MOF composites with enhanced functionalities.

Flower-like amorphous metal-organic-frameworks-based hybrid-solid-state electrolyte for high-performance lithium-metal battery

A flower-like porous amorphous Cu-aMOF-based SSE exhibits an ionic conductivity of 1.61 × 10-3 S cm-1 at 30 °C, a high lithium ion transference number of 0.71, and enables uniform Li deposition for 4000 h at 0.1 mA cm-2, demonstrating excellent cycling and rate performance. Compared to traditional crystalline Cu-MOF (1.18 × 10-3 S cm-1, 0.46, 1900 h), it shows significant improvements, highlighting the potential of amorphous MOFs with continuous structures, abundant defects, and more active sites as novel electrolyte materials for high-performance lithium-metal batteries.

Biomimetic Channels Design in Metal-Organic Framework Enabling Highly Lithium-Ion Conduction for Lithium-Metal Batteries

Solid-state electrolytes (SSEs) based on metal-organic frameworks (MOFs) are an ideal material for constructing high-performance lithium metal batteries (LMBs). However, the low ion conductivity and poor interface contact (especially at low temperatures) still seriously hinder its further application. Herein, inspired by the Na+/K+ conduction in biology systems, a series (NH2, OH, NH-(CH2)3-SO3H)-modified MIL-53-X as SSEs is reported. These functional groups are similar to anions suspended in biological ion channels, partially repelling anions while allowing cations to be effectively transported through pore channels. Subsequently, MIL-53-X with hierarchical pore structure (H-MIL-53-X) is obtained by introducing lauric acid as a regulator, and then the effects of structural design and morphology control on its performance are explored. The conductivity of H-MIL-53-NH-SO3Li with multi-level pore structure and modified by sulfonic acid groups reached 2.2 × 10-3 S cm-1 at 25 °C, lithium-ion transference number of 0.78. Besides, the H-MIL-53-NH-SO3Li still has an excellent conductivity of 10-4 S cm-1 at -40 °C. Additionally, LiFePO4/Li batteries equipped with H-MIL-53-NH-SO3Li SSEs could operate stably for over 200 cycles at 0.1 C. The strategy of combining structural and morphological design of MOFs with biomimetic ion channels opens new avenues for the design of high-performance SSEs.

Earth-Abundant Kaolinite Nanoplatelet Gel Electrolytes for Solid-State Lithium Metal Batteries

Lithium-ion batteries are the leading energy storage technology for portable electronics and vehicle electrification. However, demands for enhanced energy density, safety, and scalability necessitate solid-state alternatives to traditional liquid electrolytes. Moreover, the rapidly increasing utilization of lithium-ion batteries further requires that next-generation electrolytes are derived from earth-abundant raw materials in order to minimize supply chain and environmental concerns. Toward these ends, clay-based nanocomposite electrolytes hold significant promise since they utilize earth-abundant materials that possess superlative mechanical, thermal, and electrochemical stability, which suggests their compatibility with energy-dense lithium metal anodes. Despite these advantages, nanocomposite electrolytes rarely employ kaolinite, the most abundant variety of clay, due to strong interlayer interactions that have historically precluded efficient exfoliation of kaolinite. Overcoming this limitation, here we demonstrate a scalable liquid-phase exfoliation process that produces kaolinite nanoplatelets (KNPs) with high gravimetric surface area, thus enabling the formation of mechanically robust nanocomposites. In particular, KNPs are combined with a succinonitrile (SN) liquid electrolyte to form a nanocomposite gel electrolyte with high room-temperature ionic conductivity (1 mS cm-1), stiff storage modulus (>10 MPa), wide electrochemical stability window (4.5 V vs Li/Li+), and excellent thermal stability (>100 °C). The resulting KNP-SN nanocomposite gel electrolyte is shown to be suitable for high-rate rechargeable lithium metal batteries that employ high-voltage LiNi0.8Co0.15Al0.05O2 (NCA) cathodes. While the primary focus here is on solid-state batteries, our strategy for kaolinite liquid-phase exfoliation can serve as a scalable manufacturing platform for a wide variety of other kaolinite-based nanocomposite applications.

Recent progress and perspectives on metal-organic frameworks as solid-state electrolytes for lithium batteries

Solid-state electrolytes (SSEs) are the key materials in the new generation of all-solid-state lithium ion/metal batteries. Metal-organic frameworks (MOFs) are ideal materials for developing solid electrolytes because of their structural diversity and porous properties. However, there are several significant issues and obstacles involved, such as lower ion conductivity, a smaller ion transport number, a narrower electrochemical stability window and poor interface contact. In this review, a comprehensive analysis and summary of the unique ion-conducting behavior of MOF-based electrolytes in rechargeable batteries are presented, and the different design principles of MOF-based SSEs are classified and emphasized. Accordingly, four design principles for achieving these MOF-based SSEs are presented and the influence of SSEs combined with MOFs on the electrochemical performance of the batteries is described. Finally, the challenges in the application of MOF materials in lithium ion/metal batteries are explored, and directions for future research on MOF-based electrolytes are proposed. This review will deepen the understanding of MOF-based electrolytes and promote the development of high-performance solid-state lithium ion/metal batteries. This review not only provides theoretical guidance for research on new MOF-based SSE systems, but also contributes to further development of MOFs applied to rechargeable batteries.

Polydopamine-Induced Metal-Organic Framework Network-Enhanced High-Performance Composite Solid-State Electrolytes for Dendrite-Free Lithium Metal Batteries

Due to the high safety, flexibility, and excellent compatibility with lithium metals, composite solid-state electrolytes (CSEs) are the best candidates for next-generation lithium metal batteries, and the construction of fast and uniform Li+ transport is a critical part of the development of CSEs. In this paper, a stable three-dimensional metal-organic framework (MOF) network was obtained using polydopamine as a medium, and a high-performance CSE reinforced by the three-dimensional MOF network was constructed, which not only provides a continuous channel for Li+ transport but also restricts large anions and releases more mobile Li+ through a Lewis acid-base interaction. This strategy endows our CSEs with an ionic conductivity (7.1 × 10-4 S cm-1 at 60 °C), a wide electrochemical window (5.0 V), and a higher Li+ transfer number (0.54). At the same time, the lithium symmetric batteries can be stably cycled for 2000 h at 0.1 mA cm-2, exhibiting excellent electrochemical stability. The LiFePO4/Li cells have a high initial discharge specific capacity of 153.9 mAh g-1 at 1C, with a capacity retention of 80% after 915 cycles. This paper proposes an approach for constructing three-dimensional MOF network-enhanced CSEs, which provides insights into the design and development of MOFs for the positive effects of high-performance CSEs.

MOFs Containing Solid-State Electrolytes for Batteries

The use of metal-organic frameworks (MOFs) in solid-state electrolytes (SSEs) has been a very attractive research area that has received widespread attention in the modern world. SSEs can be divided into different types, some of which can be combined with MOFs to improve the electrochemical performance of the batteries by taking advantage of the high surface area and high porosity of MOFs. However, it also faces many serious problems and challenges. In this review, different types of SSEs are classified and the changes in these electrolytes after the addition of MOFs are described. Afterward, these SSEs with MOFs attached are introduced for different types of battery applications and the effects of these SSEs combined with MOFs on the electrochemical performance of the cells are described. Finally, some challenges faced by MOFs materials in batteries applications are presented, then some solutions to the problems and development expectations of MOFs are given.

A New In Situ Prepared MOF-Natural Polymer Composite Electrolyte for Solid Lithium Metal Batteries with Superior High- Rate Capability and Long-Term Cycling Stability at Ultrahigh Current Density

Lithium metal batteries hold promise for energy storage applications but suffer from uncontrolled lithium dendrites. In this study, a new composite membrane based on modified natural polymer and ZIF-67 is designed and prepared by the in situ composite method for the first time. Among them, a modified natural polymer composed of lithium alginate (LA) and polyacrylamide (PAM) can be obtained by electrospinning. Importantly, the polar functional groups of natural polymers can interact by hydrogen bonding and MOFs can construct lithium-ion transport channels. Consequently, compared with LA-PAM electrolyte without MOF, the electrochemical stability window of ZIF-67-LA-PAM electrolyte becomes wider from 4.5 to 5.2 V, and the lithium-ion transference number (tLi+ ) enhances from 0.326 to 0.627 at 30°C. It is worth noting that the symmetric cells with ZIF-67-LA-PAM have superior stable cycling performance at 40 and 100 mA cm-2 , and a high rate at 10C and 20C for LFP cells. Besides, the cell with NCM811 high-voltage cathode can run stably for 400 cycles with an initial discharge capacity of 136.1 mAh g-1 at 0.5C. This work provides an effective method for designing and preparing MOF-natural polymer composite electrolytes and exhibits an excellent application prospect in high-energy-density lithium metal batteries.

Distributed Li-Ion Flux Enabled by Sulfonated Covalent Organic Frameworks for High-Performance Lithium Metal Anodes

Metallic Li is considered the most promising anode material for high-energy-density batteries owing to its high theoretical capacity and low electrochemical potential. However, inhomogeneous lithium deposition and uncontrollable growth of lithium dendrites result in low lithium utilization, rapid capacity fading, and poor cycling performance. Herein, two sulfonated covalent organic frameworks (COFs) with different sulfonated group contents are synthesized as the multifunctional interlayers in lithium metal batteries. The sulfonic acid groups in the pore channels can serve as Li-anchoring sites that effectively coordinate Li ions. These periodically arranged subunits significantly guide uniform Li-ion flux distribution, guarantee smooth Li deposition, and reduce lithium dendrite formation. Consequently, these characteristics afford an excellent quasi-solid-state electrolyte with a high ionic conductivity of 1.9 × 10^-3  S  cm^-1 at room temperature and a superior Li⁺⁺ transference number of 0.91. A Li/LiFePO₄ battery with the COF-based electrolyte exhibited dendrite-free Li deposition during the charge process, accompanied by no capacity decay after 100 cycles at 0.1 C.