Fabrication of Dual Self-Healing Multifunctional Coating Based on Multicompartment Microcapsules

Progress in the Preparation and Applications of Microcapsules for Protective Coatings Against Corrosion

The annual economic loss caused by corrosion accounts for about 2%~4% of GDP, which exceeds the sum of losses caused by fires, floods, droughts, typhoons, and other disasters. Coating is one of the most effective methods to delay metal corrosion. With the development of technology and the intersection of disciplines, functional microcapsules have been applied to anticorrosive coatings, but microcapsules are still being updated. To understand the application progress of microcapsules in anticorrosive coatings, the future development trend of microcapsules is analyzed. The preparation methods, physical and chemical properties, functional characteristics, and development trends of organic, inorganic, and organic-inorganic hybrid microcapsules are described, respectively, from the perspective of material and molecular characteristics. Simultaneously, the influence of microcapsules of different materials on the properties of organic coatings is proved by examples. In addition, the research status and future development trends of microcapsule composite coating are introduced in detail. Finally, the great advantages of organic-inorganic hybrid microcapsules modified by functional materials based on natural inorganic materials in improving the utilization efficiency of loaded active substances and prolonging the life of coatings are foreseen.

Janus GO/BTA/PMMA Microcapsules for Biobased Self-Healing Anticorrosion Coatings with Ultrahigh Performance

The giant reduction of the barrier properties due to self-healing microcapsules and the lack of real-time protection during the healing remained the main challenges in self-healing anticorrosion coatings. Herein, a facile strategy using Janus graphene oxide (GO) as a dense and flexible shell has been proposed to synergistically solve these challenges. Benzotriazole (BTA) was used to synthesize Janus GO at the oil-water interface, and Janus GO/BTA/poly(methyl methacrylate) microcapsules were prepared. Energy-dispersive X-ray spectroscopy, Fourier infrared spectroscopy, Raman spectroscopy, and ultraviolet spectrophotometer analysis confirmed the formation of a Janus GO structure with one surface hydrophilic and the other hydrophobic. The surface morphology of J-GO-capsules with a high GO coverage rate was observed by scanning electron microscopy. The high biobased content coating containing J-GO-capsules showed a low-frequency impedance value above 1010 as assessed by electrochemical impedance spectroscopy after being immersed in 3.5 wt % NaCl solution for 60 days. In addition, the low-frequency impedance values of the coating were maintained after being scratched due to the self-healing properties of the J-GO-capsules as well as the real-time protective effect of the BTA. Biobased coatings with the best overall properties among all of the self-healing anticorrosion coatings were prepared.

Preparation of Graphene Oxide/Polymer Hybrid Microcapsules via Photopolymerization for Double Self-Healing Anticorrosion Coatings

In this work, graphene oxide (GO)/polymer hybrid microcapsule-loaded self-healing agents were prepared via the combination of the emulsion template method and photopolymerization technology. The incorporation of GO in the microcapsule shell not only improved the impermeability, mechanical property, and solvent resistance property of the microcapsules significantly but also endowed the microcapsules with photothermal conversion property. By incorporating GO/polymer hybrid microcapsules in water-borne epoxy resin, a novel kind of anticorrosion coating with a double self-healing property was successfully fabricated. When the coating was scratched, the linseed oil (LO) encapsulated in the microcapsules could fill the crack, and the photothermal conversion property of GO could promote the molecular chain movement of the damaged area under near-infrared (NIR) irradiation to realize the close of the crack. Based on the filling of LO and photothermal conversion-induced scratch narrowing, the "filling" and "close" double self-healing effect can be realized under temporal NIR irradiation, which could lead to the complete recovery of the scratched coating. The |Z|f=0.1Hz value of the damaged coating with GO/polymer microcapsules after double healing was comparable to that of the intact coating, which was about 4 orders of magnitude higher than that of the scratched blank coating and single self-healing coating. As to the neutral salt spray test, the scratched blank coating failed in protection after 100 h, while the healed composite coating did not show any corrosion after 300 h.

Satisfactory Tensile Strength and Strain of Recyclable Polyurethane with a Trimaleimide Structure for Thermal Self-Healing and Anticorrosive Coatings

Bismaleimide (BMI) is often used as the cross-linking reagent in Diels-Alder (D-A)-type intrinsic self-healing materials (DISMs) to promote the connectivity of damaged surfaces based on reversible D-A bond formation on the molecular scale. Until now, although DISMs have exhibited great potential in the applications of various sensors, electronic skin, and artificial muscles, it is still difficult to prepare DISMs with satisfactory self-healing abilities and high tensile strengths and strains at the same time, thus largely limiting their applications in self-healing anticorrosive coatings. Herein, symmetrical trimaleimide (TMI) was successfully synthesized, and trimaleimide-structured D-A self-healing polyurethane (TMI-DA-PU) was prepared via the reversible D-A reaction (cycloaddition of furan and maleimide). As a DISM, TMI-DA-PU exhibits apparently higher self-healing efficiency (98.7%), tensile strength (25.4 MPa), and strain (1378%) compared to bismaleimide-structured D-A self-healing polyurethane (BMI-DA-PU) (self-healing efficiency, 90.2%; tensile strength, 19.3 MPa; strain, 1174%). In addition, TMI-DA-PU shows a high recycling efficiency (>95%) after 4 cycles of recycling. A series of characterizations indicate that TMI provides more monoene rings as the self-healing sites, forms denser cross-linked structures compared to BMI, and is, thus, more appropriate to be used for DISM applications. Moreover, the barrier abilities of coatings can be semi-quantitatively expressed by the impedance value at 0.01 Hz (|Z|0.01 Hz). The |Z|0.01 Hz value of the TMI-DA-PU coating is 3.93 × 109 Ω cm2 on day 0, which is significantly higher than that of the BMI-DA-PU coating (6.76 × 108 Ω cm2 on day 0), indicating that the denser rigid cross-linked structure of TMI results in the small porosity in the TMI-DA-PU coating, thus effectively improving the anticorrosion performance. The construction of DISMs with the structure of TMI demonstrates immense potential in self-healing anticorrosive coatings.

Polyaniline Microspheres with Corrosion Inhibition, Corrosion Sensing, and Photothermal Self-Healing Properties toward Intelligent Coating

A smart coating integrating functions of corrosion inhibition, self-healing, and corrosion-sensing was developed based on a polyaniline (PANI) microsphere-loading corrosion sensing probe (8-hydroxyquinone, 8-HQ). The PANI microsphere was prepared in a facile one-pot process via the combination of photopolymerization and an emulsion template. The 8-HQ-loaded PANI microsphere achieved three synergetic effects simultaneously: corrosion inhibition, corrosion sensing, and photothermal self-healing abilities. Benefiting from the corrosion inhibition effect of PANI, the coating with the PANI microsphere exhibited significantly enhanced anticorrosion behavior. After soaking in NaCl solution for 35 days, its impedance was maintained at 1.26 × 109 Ω·cm2, nearly 3 orders of magnitude higher than that of pure resin coating. Meanwhile, the encapsulated 8-HQ exhibited pH-responsive release behavior thanks to the pH-responsive characteristics of PANI, which could chelate with Al3+ ions to form 8-HQ-Al3+ coordinates with a conspicuous fluorescence, achieving a real-time corrosion diagnosing function. Moreover, benefiting from the photothermal property of PANI, the coating with the PANI microsphere displayed rapid crack closure behavior under NIR light irradiation, and the healing efficiency could reach 83.56% under near-infrared irradiation. This work presents an innovative strategy for fabricating an intelligent self-healing, self-reporting, and anticorrosion coating, which provides a new vision to prolong the lifetime of metals.

Dual-Shell Microcapsules for High-Response Efficiency Self-Healing of Multi-Scale Damage in Waterborne Polymer-Cement Coatings

Waterborne polymer-cement coatings have been widely applied in building materials due to their organic solvent-free nature, low cost, and eco-friendliness. However, these coatings can easily crack during the drying process as a result of construction environment factors, compromising the barrier performance of the coating and limiting its large-scale application. In this study, a dual-shell self-healing microcapsule was developed, which can effectively heal damage on a macro scale in waterborne polymer-cement coatings. Specifically, this dual-shell self-healing microcapsule was designed with a silica gel shell and a tannic acid-cuprum (TA-Cu) double-shell structure embedded with an epoxy resin (EP) healing agent, which was successfully fabricated via a two-step in situ polymerization. This silica gel shell self-healing microcapsules can effectively load into waterborne polymer-cement coatings. As the coating dries and solidifies, the silica gel shell of the microcapsule also becomes loose and brittle due to dehydration. This improves the mechanical initiation efficiency of the microcapsules in the coating. This study provides a novel approach for the application of self-healing microcapsules in waterborne coating systems, which can significantly reduce cracking during the drying process of waterborne polymer-cement coatings and improve the service life of the coating under complex conditions.

A decade of developing applications exploiting the properties of polyelectrolyte multilayer capsules

Transferring the layer-by-layer (LbL) coating approach from planar surfaces to spherical templates and subsequently dissolving these templates leads to the fabrication of polyelectrolyte multilayer capsules. The versatility of the coatings of capsules and their flexibility upon bringing in virtually any material into the coatings has quickly drawn substantial attention. Here, we provide an overview of the main developments in this field, highlighting the trends in the last decade. In the beginning, various methods of encapsulation and release are discussed followed by a broad range of applications, which were developed and explored. We also outline the current trends, where the range of applications is continuing to grow, including addition of whole new and different application areas.

Current Self-Healing Binders for Energetic Composite Material Applications

Energetic composite materials (ECMs) are the basic materials of polymer binder explosives and composite solid propellants, which are mainly composed of explosive crystals and binders. During the manufacturing, storage and use of ECMs, the bonding surface is prone to micro/fine cracks or defects caused by external stimuli such as temperature, humidity and impact, affecting the safety and service of ECMs. Therefore, substantial efforts have been devoted to designing suitable self-healing binders aimed at repairing cracks/defects. This review describes the research progress on self-healing binders for ECMs. The structural designs of these strategies to manipulate macro-molecular and/or supramolecular polymers are discussed in detail, and then the implementation of these strategies on ECMs is discussed. However, the reasonable configuration of robust microstructures and effective dynamic exchange are still challenges. Therefore, the prospects for the development of self-healing binders for ECMs are proposed. These critical insights are emphasized to guide the research on developing novel self-healing binders for ECMs in the future.

Effect of Transparent, Purple, and Yellow Shellac Microcapsules on Properties of the Coating on Paraberlinia bifoliolata Surface

In order to explore the applicability of the waterborne coating with self-repairing microcapsules based on the surface of wood boards and specify the optimal range of microcapsule content in the coating, three different kinds of shellac microcapsules (transparent shellac, purple shellac, and yellow shellac) were embedded in a waterborne acrylic coating at 0, 1.5 wt.%, 3.0 wt.%, 4.5 wt.%, 6.0 wt.%, and 7.5 wt.%. The Beli wood (Paraberlinia bifoliolata) boards were then covered with self-repairing coatings to investigate the self-repairing coating’s physical and chemical properties, aging resistance, and scratch repair abilities. The findings demonstrated that the chromatic difference and gloss of surface coatings on Beli wood boards were significantly influenced by the content of microcapsules. The optical characteristics and cold liquid resistance performance of the coating on Beli wood were enhanced when the microcapsule content was 3.0 wt.%. Additionally, the mechanical qualities of the coating with 3.0 wt.% transparent shellac microcapsules on Beli wood surface were better, with an H hardness, grade 2 adhesion, and 8 kg·cm of impact strength. The studies on scratch repairing and aging resistance indicated that microcapsules helped to slow down the coating’s damage and retard aging. After a microcrack appeared, the waterborne coating with microcapsules on Beli wood’s surface had the capacity to repair itself. After aging, the coating with 3.0 wt.% transparent shellac microcapsule on Beli wood boards had a better performance on the comprehensive properties, with a 28.9% light loss rate and a 6 kg·cm impact resistance. It also had a 25.0% repairing rate in scratch width after being damaged for 5 d. This study advances the development of self-healing waterborne coatings on the wood board with shellac microcapsules by examining the effects of shellac in various colors and shellac microcapsule content in waterborne coatings.

Long-Lasting Self-Healing Surface Dewettability through the Rapid Regeneration of Surface Morphologies

The development of self-healing systems for artificial superhydrophobic materials/surfaces based on the reconstruction of surface topologies rather than chemical makeup has been much less established. In this article, we report for the first time a simple and straightforward method for self-repairing surface dewettability over a long period of time by rapidly regenerating surface microstructures. We selected paraffin wax as a matrix for methyltrichlorosilane (MTCS) having strong reactivity with moisture/water and simply mixed them. When the as-prepared MTCS-loaded paraffin wax surfaces were exposed to air for a few hours, they spontaneously became highly hydrophobic with water contact angles of about 150° due to the formation of disordered surface microstructures. The use of paraffin wax with a few angstrom-scale space as a matrix was found to be more effective than the use of poly(dimethylsiloxane) with nanometer-size porosity in preventing both evaporation and degradation of MTCS's chemical reactivity for a long period. Therefore, for about 1 month, even after the surface microstructures were completely destroyed, surface dewettability could be self-repaired by rapidly regenerating surface morphologies. In addition, chemical damage by UV/ozone exposure could also be repeatably self-healed by the reconstruction of surface chemical makeup. We thus expect that this simple approach could provide future insights to impart the self-healing ability of manmade superhydrophobic materials/surfaces against chemical and physical damages.