Thermoelectrochemical Cells Based on Ferricyanide/Ferrocyanide/Guanidinium: Application and Challenges

Contributions of Both the Eastman Entropy of Transfer and Electric Double Layer to the Electromotive Force of Ionic Thermoelectric Supercapacitors

Recently, ionic thermoelectric supercapacitors have gained attention because of their high open circuit voltages, even for ions that are redox inactive. As a source of open circuit voltage (electromotive force), an asymmetry in electric double layers developed by the adsorption of ions at the electrode surfaces kept at different temperatures has previously been proposed. As another source, the Eastman entropy of transfer, which is related to the Soret coefficient, has been considered. Herein, we theoretically estimated the open circuit voltages generated in the Stern layer, the diffuse layer and by the Eastman entropy of transfer. The Grahame equation has been generalized to consider the temperature gradient in the diffuse layer. The ion coverage difference between the hot and cold electrodes and the open circuit voltage are obtained by solving self-consistent equations using the adsorption isotherm. The results are compared with experimental results using a metal electrode and a conductive polymer-based electrode. We show the possible origin of the high ionic Seebeck effect caused by the asymmetry in the coverages of adsorbed ions in terms of the various types of interface capacitance factor at the hot and cold electrodes.

Wearable Device with High Thermoelectric Performance and Long-Lasting Usability Based on Gel-Thermocells for Body Heat Harvesting

Utilizing the thermogalvanic effect, flexible thermoelectric materials present a compelling avenue for converting heat into electricity, especially in the context of wearable electronics. However, prolonged usage is hampered by the limitation imposed on the thermoelectric device's operational time due to the evaporation of moisture. Deep eutectic solvents (DESs) offer a promising solution for low-moisture gel fabrication. In this study, a bacterial cellulose (BC)/polyacrylic acid (PAA)/guanidinium chloride (GdmCl) gel is synthesized by incorporating BC into the DES. High-performance n-type and p-type thermocells (TECs) are developed by introducing Fe(ClO4)2/3 and K3/4Fe(CN)6, respectively. BC enhances the mechanical properties through the construction of an interpenetrating network structure. The coordination of carboxyl groups on PAA with Fe3+ and the crystallization induced by Gdm+ with [Fe(CN)6]4- remarkably improve the thermoelectric performance, achieving a Seebeck coefficient (S) of 2.4 mV K-1 and ion conductivity (σ) of 1.4 S m-1 for the n-type TEC, and ‒2.8 mV K-1 and 1.9 S m-1 for the p-type TEC. A flexible wearable thermoelectric device is fabricated with a S of 82 mV K-1 and it maintains a stable output over one month. This research broadens the application scope of DESs in the thermoelectric field and offers promising strategies for long-lasting wearable energy solutions.

Exploring the local solvation structure of redox molecules in a mixed solvent for increasing the Seebeck coefficient of thermocells

A thermocell is an emerging alternative to thermoelectric devices and exhibits a high Seebeck coefficient (Se) due to the large change of solvation entropy associated with redox reactions. Here, the Se of p-chloranil radicals/dianions (CA˙-/2-) in acetonitrile was drastically increased from -1.3 to -2.6 mV K-1 by the addition of ethanol, and the increment surpassed the estimation of the classical Born model with continuum solvent media. UV-vis spectroscopy and electrochemical measurements at various mixing ratios of acetonitrile to ethanol revealed that the strong hydrogen bonding between ethanol and oxygen atoms of CA2- forms a 4 : 1 solvent-ion pair, while the ethanol molecules binding to CA2- dissociate upon its oxidation to CA˙-. The local solvation structures of CA2- are in good agreement with density functional theory. This order-disorder transition of the local solvation structure around the CA˙-/2- ions produces a large entropy change and results in a large Se value. The tailored solvation structure of redox ions by hydrogen bonding is a versatile method applicable to a variety of redox pairs and solvents, contributing to the development of electrolyte engineering for thermocells.

Stretchable and Durable Bacterial Cellulose-Based Thermocell with Improved Thermopower Density for Low-Grade Heat Harvesting

Low-grade heat exists ubiquitously in the environment, and gel-state thermogalvanic cells (GTCs) can directly convert thermal energy into electricity by a redox reaction. However, their low ionic conductivity and poor mechanical properties are still insufficient for their potential applications. Here, we designed a bacterial cellulose (BC) nanofiber-macromolecular entanglement network to balance the GTC's thermopower and mechanical properties. Therefore, the BC-GTC shows a Seebeck coefficient of 3.84 mV K-1, an ionic conductivity of 108.5 mS cm-1, and a high specific output power density of 1760 μW m-2 K-2, which are much higher than most current literature. Further connecting 15 units of BC-GTCs, the output voltage of 3.35 V can be obtained at a temperature gradient of 65 K, which can directly power electronic devices such as electronic calculators, thermohydrometers, fans, and light-emitting diodes (LEDs). This work offers a promising method for developing high-performance and durable GTC in sustainable green energy.

High-Power-Density Thermoelectrochemical Cell Based on Ni/NiO Nanostructured Microsphere Electrodes with Alkaline Electrolyte

Effective low-grade waste heat harvesting and its conversion into electric energy by the means of thermoelectrochemical cells (TECs) are a strong theme in the field of renewable energy investigation. Despite considerable scientific research, TECs have not yet been practically applied due to the high cost of electrode materials and low effectiveness levels. A large hypothetical Seebeck coefficient allow the harvest of the low-grade waste heat and, particularly, to use TECs for collecting human body heat. This paper demonstrates the investigation of estimated hypothetical Seebeck coefficient dependency on KOH electrolyte concentration for TECs with hollow nanostructured Ni/NiO microsphere electrodes. It proposes a thermoelectrochemical cell with power density of 1.72 W·m-2 and describes the chemistry of electrodes and near-electrode space. Also, the paper demonstrates a decrease in charge transfer resistance from 3.5 to 0.52 Ω and a decrease in capacitive behavior with increasing electrolyte concentration due to diffusion effects.

High-Performance Isotropic Thermo-Electrochemical Cells Using Agar-Gelled Ferricyanide/Ferrocyanide/Guanidinium

An isotropic thermo-electrochemical cell is introduced with a high Seebeck coefficient (S _e) of 3.3 mV K^-1 that uses a ferricyanide/ferrocyanide/guanidinium-based agar-gelated electrolyte. A power density of about 20 µW cm^-2 is achieved at a temperature difference of about 10 K, regardless of whether the heat source is on the top or bottom section of the cell. This behavior is very different from that of cells with liquid electrolytes, which exhibit high anisotropy, and for which high S _e values are achieved only by heating the bottom electrode. The guanidinium-containing gelatinized cell does not exhibit steady-state operation, but its performance recovers when disconnected from the external load, suggesting that the observed power drop under load conditions is not due to device degeneration. The large S _e value and isotropic properties can mean that the novel system represents a major advancement from the standpoint of harvesting of low-temperature heat, such as body heat and solar thermal heat.

Study on Removal Mechanism for Copper Cyanide Complex Ions in Water: Ion Species Differences and Evolution Process

A large amount of cyanide-containing wastewater is discharged during electrode material synthesis. Among them, cyanides will form metal-cyanide complex ions which possess high stability, making it challenging to separate them from these wastewaters. Therefore, it is imperative to understand the complexation mechanism of cyanide ions and heavy metal ions from wastewater in order to obtain a deep insight into the process of cyanide removal. This study employs Density Functional Theory (DFT) calculations to reveal the complexation mechanism of metal-cyanide complex ions formed by the interaction of Cu+ and CN- in copper cyanide systems and its transformation patterns. Quantum chemical calculations show that the precipitation properties of Cu(CN)43- can assist in the removal of CN-. Therefore, transferring other metal-cyanide complex ions to Cu(CN)43- can achieve deep removal. OLI studio 11.0 analyzed the optimal process parameters of Cu(CN)43- under different conditions and determined the optimal process parameters of the removal depth of CN-. This work has the potential to contribute to the future preparation of related materials such as CN- removal adsorbents and catalysts and provide theoretical foundations for the development of more efficient, stable, and environmentally friendly next-generation energy storage electrode materials.

Advancement of Electrochemical Thermoelectric Conversion with Molecular Technology

Thermocells are a thermoelectric conversion technology that utilizes the shift in an electrochemical equilibrium arising from a temperature difference. This technology has a long history; however, its low conversion efficiency impedes its practical usage. Recently, an increasing number of reports have shown drastic improvements in thermoelectric conversion efficiency, and thermocells could arguably represent an alternative to solid thermoelectric devices. In this Minireview, we regard thermocells as molecular systems consisting of successive molecular processes responding to a temperature change to achieve energy generation. Various molecular technologies have been applied to thermocells in recent years, and could stimulate diverse research fields, including supramolecular chemistry, physical chemistry, electrochemistry, and solid-state ionics. These research approaches will also provide novel methods for achieving a sustainable society in the future.