Mechanistic Study of Controlled Zinc Electrodeposition Behaviors Facilitated by Nanoscale Electrolyte Additives at the Electrode Interface

Mechanistic Understanding of Long Duration Fast Charge Aqueous Zinc Batteries Using Physically Adsorbed Oligomers as Interphases

Polymers have been used as additives in the liquid electrolytes typically used for secondary batteries that utilize metals as anode. Such additives are conventionally argued to improve long-term anode performance by suppressing morphological and hydrodynamic instabilities thought to be responsible for out-of-plane and dendritic metal deposition during battery charging. More recent studies have reported that the polymer additives provide even more fundamental mechanisms for stabilizing metal electrodeposition through their ability to regulate metal electrodeposit crystallography and, thereby, morphology. Few studies explore how polymers carried in a liquid electrolyte achieve these functions, and fewer still provide rules for choosing among the various polymer types, the additive polymer molecular weight (Mw), and concentration in the electrolyte. Here, we investigate how these generally easy-to-control variables influence electrochemical interphase formation inside battery cells and their impact on the morphology and reversibility of Zn electrodes in aqueous electrolytes. We focus on aqueous Zn-iodine electrochemical cells containing linear polyethylene glycol (PEG) chains as additives and find that in electrolytes where the polymer concentration is maintained in the dilute solution regime there is an optimum polymer molecular weight (Mw ≈ 1000 Da), above which beneficial effects of polymers on Zn electrode reversibility and Zn-I2 battery lifetime are progressively lost. By means of optical ellipsometry and theoretical calculations, we show that the optimal Mw is associated with saturation of the thickness of a physiosorbed PEG coating on the Zn metal electrode. Electron microscopy and X-ray photoelectron spectroscopy analysis of Zn electrodeposits formed in such electrolytes reveal that the physiosorbed polymer coating has two primary effects─it regulates the deposit morphology and suppresses parasitic reactions between the electrode and electrolyte components. The parasitic reactions produce species like ZnO, which are known to passivate the Zn electrode and promote nonuniform deposition. Galvanostatic cycling measurements in aqueous Zn-I2 cells containing the PEG additives at the optimal Mw show that the cells maintain very high Coulombic efficiencies (≥99%) at current densities as high as 50 mA/cm2─close to the maximum values permissible across the Celgard separator membranes used in our studies.

Electrolyte-Electrocatalyst Interfacial Effects of Polymeric Materials for Tandem CO2 Capture and Conversion Elucidated Using In Situ Electrochemical AFM

Integrating CO2 capture and electrochemical conversion has been proposed as a strategy to reduce the net energy required for CO2 regeneration in traditional CO2 capture and conversion schemes and can be coupled with carbon-free renewable electricity. Polyethylenimine (PEI)-based materials have been previously studied as CO2 capture materials and can be integrated in these reactive capture processes. PEI-based electrolytes have been found to significantly increase the CO2 loading, and impact selectivity and rate of product formation when compared to the conventional aqueous electrolytes. However, the influence of these materials at the catalyst-electrode interface is currently not well understood. In this study, PEI-based electrolytes were prepared and their impact on the morphology of a silver electrode performing electrochemical CO2 reduction (CO2R) was studied using in situ electrochemical atomic force microscopy (EC-AFM). The presence of PEI on the electrode surface could be distinguished based on nanomechanical properties (DMT modulus), and changes were observed as negative polarization was applied, revealing a reorganization of the PEI chains due to electrostatic interactions. These changes were impacted by the electrolyte composition, including the addition of supporting electrolyte KHCO3 salt, as well as CO2 captured by the PEI-based electrolyte, which minimized the change in surface mechanical properties and degree of PEI alignment on the electrode surface. The changes in surface mechanical properties were also dependent on the PEI polymer length, with higher molecular weight PEI showing different reconfiguration than the shorter polymer brushes. The study highlights that the choice of polymer material, the electrolyte composition, and CO2 captured impact the near-electrode environment, which has implications for CO2R, and presents EC-AFM as a new tool that can be used to probe the dynamic behavior of these interfaces during electrocatalysis.

Elucidating the assembly of nanoparticle organic hybrid materials (NOHMs) near an electrode interface with varying potential using neutron reflectivity

A critical concern regarding electrolyte formulation in an electrochemical environment is the impact of the interaction of the multiple components (i.e., supporting electrolyte or additive) with the electrode surface. Recently, liquid-like neat Nanoparticle Organic Hybrid Materials (NOHMs) have been considered as an electrolyte component to improve the transport of redox-active species to the electrode surface. However, the structure and assembly of the NOHMs near the electrode surface is unknown and could significantly impact the electrode-electrolyte interface. Hence, we have investigated the depth profile of polyetheramine (HPE) polymer and NOHM-I-HPE (nanoparticles with ionically bonded HPE polymer) in deuterated water (D2O) in the presence of two different salts (KHCO3 and ZnCl2) near two different electrode surfaces using neutron reflectometry. Moreover, the depth profile of the NOHM-I-HPE near the electrode surface in a potential has also been studied with in situ reflectivity experiments. Our results indicate that a change in the chemical structure/hydrophilicity of the electrode surface does not significantly impact the ordering of HPE polymer or NOHM-I-HPE near the surface. This study also indicates that the NOHM-I-HPE particles form a clear layer near the electrode surface immediately above an adsorbed layer of free polymer on the electrode surface. The addition of salt does not impact the layering of NOHM-I-HPE, though it does alter the conformation of the polymer grafted to the nanoparticle surface and free polymer sequestered near the surface. Finally, the application of negative potential results in an increased amount of free polymer near the electrode surface. Correlating the depth profile of free polymer and NOHM-I-HPE particles with the electrochemical performance indicates that this assembly of free polymer near the electrode surface in NOHM-I-HPE solutions contributes to the higher current density of the system. Therefore, this holistic study offers insight into the importance of the assembly of NOHM-I-HPE electrolyte and free polymer near the electrode surface in an electrochemical milieu on its performance.

Enhancing the Performance of Reversible Zn Deposition by Ultrathin Polyelectrolyte Coatings

Modifying the surfaces of zinc and other metallic substrates is considered an effective strategy to enhance the reversibility of the zinc deposition and stripping processes. While a variety of surface modification strategies have been explored, their ability to be practically implemented is not always trivial due to the associated high costs and complexity of the proposed techniques. In this study, we showcase a straightforward method for preparing ultrathin polyelectrolyte coatings using polydiallyldimethylammonium chloride (PDDA) and polyethylenimine (PEI). The coatings, characterized by their electrostatic charge and hydrophobicity, suppress side reactions and even out the electrodeposition process across the substrate surface. The PDDA-coated anodes demonstrate significantly reduced voltage hysteresis, uniform zinc morphology, improved self-discharge rates, and an impressive Coulombic efficiency exceeding 99% over prolonged cycling. Our findings highlight the potential that such cost-effective and straightforward surface treatments could be widely applied in Zn metal-based batteries.

From Ionic Nanoparticle Organic Hybrids to Ionic Nanocomposites: Structure, Dynamics, and Properties: A Review

Ionic nanoparticle organic hybrids have been the focus of research for almost 20 years, however the substitution of ionic canopy by an ionic-entangled polymer matrix was implemented only recently, and can lead to the formulation of ionic nanocomposites. The functionalization of nanoparticle surface by covalently grafting a charged ligand (corona) interacting electrostatically with the oppositely charged canopy (polymer matrix) can promote the dispersion state and stability which are prerequisites for property "tuning", polymer reinforcement, and fabrication of high-performance nanocomposites. Different types of nanoparticle, shape (spherical or anisotropic), loading, graft corona, polymer matrix type, charge density, molecular weight, can influence the nanoparticle dispersion state, and can alter the rheological, mechanical, electrical, self-healing, and shape-memory behavior of ionic nanocomposites. Such ionic nanocomposites can offer new properties and design possibilities in comparison to traditional polymer nanocomposites. However, to achieve a technological breakthrough by designing and developing such ionic nanomaterials, a synergy between experiments and simulation methods is necessary in order to obtain a fundamental understanding of the underlying physics and chemistry. Although there are a few coarse-grained simulation efforts to disclose the underlying physics, atomistic models and simulations that could shed light on the interphase, effect of polymer and nanoparticle chemistry on behavior, are completely absent.