A Trilayered Composite Fabric with Directional Water Transport and Resistance to Blood Penetration for Medical Protective Clothing

Exploiting the interfacial instability of liquid-infused Janus membranes for versatile liquid gating

HYPOTHESIS

With varied affinities for distinct liquids, liquid/solid interfaces can exhibit different stability against external liquids. For liquid-infused Janus membranes with different surface chemistry, there may be significant osmotic pressure gradients across the membrane, facilitating liquid gating of various liquids in diverse systems. Such strategy may highly widen the application areas of liquid gating technology.

EXPERIMENTS

Liquid-infused Janus membranes were prepared via the combination of hydroxyapatite (amphiphilic but more water-loving) on one side and 3-(dodecylamino) propane-1-sulfonic acid (amphiphilic but more oil-loving) on the other side and subsequent infusion of various liquids (water or oils). The gating property of them was studied for all the conditions and the application potential in various areas including medical and micro-reaction was also explored.

FINDINGS

After being infused with certain liquids (i.e., water or oils), the obtained membranes displaying opposite affinity toward water and oils can universally gate immiscible liquids at a high rectification ratio in air and in liquids. The interfacial instability of liquid films on the reverse sides was found to be critical in the achievement of liquid gating. Moreover, such gating property is also applicable in the transportation of various soluble substances (ions and drugs) and facilitating the dislodgement of blood.

Bioinspired wood-based wedge-shaped surface with gradient wettability for enhanced directional liquid transport and fog harvesting

Inspired by cactus spine and desert beetle back structures, we developed a wood-based wedge-shaped surface with gradient wettability for efficient and controlled spontaneous directional liquid transport. Utilizing the natural anisotropic and porous structure of wood, the wedge-shaped surface exhibited a continuous gradient wettability after chemical treatments combined with UV-induced modifications. The resulting surface enabled highly efficient directional liquid transport with transport rates reaching up to 8.9 mm s-1 on horizontal placement and 0.64 mm s-1 on vertical surfaces against gravity. By integrating geometric curvature and surface energy gradients, the innovative design achieved synergistic Laplace pressure-driven and wettability-driven liquid motions. To further demonstrate its potential for practical application, a fog-driven power device constructed using the gradient wettability wood with cactus spines not only enhanced water harvesting and energy conversion capabilities but also offered an environmentally friendly system. This study expanded the design toolbox for bioinspired liquid management surfaces, offering promising applications in water resource management, energy harvesting, and microfluidic devices.

True "Liquid Diode": Check Valve@Janus Membrane to Achieve an Extremely High Reverse Breakthrough Pressure

Janus membranes, widely recognized for their remarkable unidirectional permeability, can achieve spontaneous liquid transport from the hydrophobic sides to the hydrophilic sides while impeding liquid flow in the opposite direction. However, the current Janus membrane only possesses limited reverse breakthrough pressure (RBP) (<20 cm water height), which is a key factor in determining the unidirectional liquid transport function. Here, inspired by the one-way blood transport function of heart valves, a solution to the issue above is proposed in the form of a Janus membrane integrated with a gravity-assisted check valve (check valve@Janus membrane). As a result, the breakthrough pressure of the check valve@Janus membrane was observed to be nearly zero in the positive direction. More importantly, the RBP had been observed to reach up to 4 m. This considerable advance in RBP is predominantly attributable to the unparalleled resistance of the check valve to the backward flow. The check valve@Janus membrane results in a perfect unidirectional flow, thereby achieving the concept of a true "liquid diode". This innovation offers a novel method for enhancing the RBP of a Janus membrane, opening up a wealth of potential avenues for future applications in clinical medicine, microfluidics, and other disciplines.

Directional Liquid Transport in Thin Fibrous Matrices: Enhancement of Advanced Applications

Directional liquid transport fibrous matrices (DLTFMs) have the unique ability to direct liquid movement in a single direction through their thickness. Beyond their inherent liquid transport function, DLTFMs can also enhance the effectiveness of additional functionalities. This review focuses on recent advances in DLTFMs, particularly the role of DLTs in enhancing secondary functions. We begin with a brief overview of the historical development and major achievements in DLTFM research, followed by an outline of the classification, fabrication techniques, and basic functions derived from their natural liquid transport properties. The integration of DLT to enhance secondary functionalities such as responsiveness, thermal regulation, and wearable technology for innovative applications in various sectors is then discussed. The review concludes with a discussion of key challenges and prospects in the field, including the durability and reliability of DLT performance, the precise regulation of fluid transport rates, the resilience and longevity of DLTFMs in harsh environments, and the impact of DLT variations on performance enhancement. The goal of this review is to stimulate further innovative studies on DLTFMs and to promote their practical implementation in a variety of industries.

Interfacial fluid manipulation with bioinspired strategies: special wettability and asymmetric structures

The inspirations from nature always enlighten us to develop advanced science and technology. To survive in complicated and harsh environments, plants and animals have evolved remarkable capabilities to control fluid transfer via sophisticated designs such as wettability contrast, oriented micro-/nano-structures, and geometry gradients. Based on the bioinspired structures, the on-surface fluid manipulation exhibits spontaneous, continuous, smart, and integrated performances, which can promote the applications in the fields of heat transfer, microfluidics, heterogeneous catalysis, water harvesting, etc. Although fluid manipulating interfaces (FMIs) have provided plenty of ideas to optimize the current systems, a comprehensive review of history, classification, fabrication, and integration focusing on their interfacial chemistry and asymmetric structure is highly required. In this review, we systematically introduce development and highlight the state-of-the-art progress of bioinspired FMIs. Firstly, the biological prototype and development timeline are presented, and the underlying mechanism of on-surface fluid control on versatile structures is analyzed. Secondly, the definition and classification of FMIs as well as the strategy for controlling fluid/interface interaction are discussed. Thirdly, emergent applications of FMIs in practical scenarios including fog/vapor collection, fluid diodes, interfacial catalysis, etc. are presented. Furthermore, the challenges and prospects of interfacial liquid manipulation are concluded. We envision that this review should provide guidance for the incorporation of FMIs into suitable situations, which enlightens interdisciplinary research and practical applications in the fields of interface chemistry, materials design, bionic science, fluid dynamics, etc.

Janus Antipyretic Pastes for Efficient, Durable and Comfortable Personal Physical Cooling

Prompt and prolonged cooling is extremely important when the body is in a fever state. Here, we proposed a concept of Janus antipyretic paste (JAP) with unique asymmetric wetting for effective and durable personal physical cooling. The prepared JAP possesses greater one-way transport capacity, and faster average water evaporation rate (∼2 times) than the original fabric. Compared to the wet cotton fabric (a reduction of ∼2.9 °C) and medical antipyretic paste (MAP) (no cooling after 5 h), the JAP achieved the best cooling effect and long cooling duration (cooling by 3.8 °C, at least 5-7 h) in practical application tests. In addition, the wearability of JAP is well validated, including its excellent breathability and good flexibility, which can maximum improve the comfort of our body. We believe the new JAP with superior cooling and comfort properties will provide promising design guidelines for the next generation of family or hospital physical cooling products.

Progress in the Preparation and Application of Breathable Membranes

Breathable membranes with micropores enable the transfer of gas molecules while blocking liquids and solids, and have a wide range of applications in medical, industrial, environmental, and energy fields. Breathability is highly influenced by the nature of a material, pore size, and pore structure. Preparation methods and the incorporation of functional materials are responsible for the variety of physical properties and applications of breathable membranes. In this review, the preparation methods of breathable membranes, including blown film extrusion, cast film extrusion, phase separation, and electrospinning, are discussed. According to the antibacterial, hydrophobic, thermal insulation, conductive, and adsorption properties, the application of breathable membranes in the fields of electronics, medicine, textiles, packaging, energy, and the environment are summarized. Perspectives on the development trends and challenges of breathable membranes are discussed.

Personal Thermoregulation by Moisture-Engineered Materials

Personal thermal management can effectively manage the skin microenvironment, improve human comfort, and reduce energy consumption. In personal thermal-management technology, owing to the high latent heat of water evaporation in wet-response textiles, heat- and moisture-transfer coexist and interact with each other. In the last few years, with rapid advances in materials science and innovative polymers, humidity-sensitive textiles have been developed for personal thermal management. However, a large gap exists between the conceptual laboratory-scale design and actual textile. Here, moisture-responsive textiles based on flap opening and closing, those based on yarn/fiber deformation, and sweat-evaporation regulation based on textile design for personal thermoregulation are reviewed, and the corresponding mechanisms and research progress are discussed. Finally, the existing engineering and scientific limitations and future developments are considered to resolve the existing issues and accelerate the practical application of moisture-responsive textiles and related technologies.

A sandwich-like silk fibroin/polysaccharide composite dressing with continual biofluid draining for wound exudate management

Optimal wound healing requires a wet microenvironment without over-hydration. Inspired by capillarity and transpiration, we have developed a sandwich-like fibers/sponge dressing with continuous exudate drainage to maintain appropriate wound moisture. This dressing is prepared by integrating a three-layer structure using the freeze-drying method. Layer I, as the side that contacts with the skin directly, consists of a hydrophobic silk fibroin membrane; Layer II, providing the pumping action, is made of superabsorbent chitosan-konjac glucomannan sponge; Layer III, accelerating evaporation sixfold compared to natural evaporation, is constructed with a graphene oxide soaked hydrophilic cellulose acetate membrane. Animal experiments showed that the composite dressing had superior wound-healing characteristics, with wounds decreasing to 24.8% of their original size compared to 28.5% for the commercial dressing and 43.2% for the control. The enhanced wound healing can be ascribed to the hierarchical porous structure serves as the fluid-driving factor in this effort; the hydrophilicity of a membrane composed of silk fibroin nanofibers is adjustable to regulate fluid-transporting capacity; and the photothermal effect of graphene oxide guarantees exudates that have migrated to the top layer to evaporate continuously. These findings indicate the unidirectional wicking dressing has the potential to become the next generation of clinical dressings.

Designing of anisotropic gradient surfaces for directional liquid transport: Fundamentals, construction, and applications

Many biological surfaces are capable of transporting liquids in a directional manner without energy consumption. Inspired by nature, constructing asymmetric gradient surfaces to achieve desired droplet transport, such as a liquid diode, brings an incredibly valuable and promising area of research with a wide range of applications. Enabled by advances in nanotechnology and manufacturing techniques, biomimetics has emerged as a promising avenue for engineering various types of anisotropic material system. Over the past few decades, this approach has yielded significant progress in both fundamental understanding and practical applications. Theoretical studies revealed that the heterogeneous composition and topography mainly govern the wetting mechanisms and dynamics behavior of droplets, including the interdisciplinary aspects of materials, chemistry, and physics. In this review, we provide a concise overview of various biological surfaces that exhibit anisotropic droplet transport. We discussed the theoretical foundations and mechanisms of droplet motion on designed surfaces and reviewed recent research advances in droplet directional transport on designed plane surfaces and Janus membranes. Such liquid-diode materials yield diverse promising applications, involving droplet collection, liquid separation and delivery, functional textiles, and biomedical applications. We also discuss the recent challenges and ongoing approaches to enhance the functionality and application performance of anisotropic materials.

Tri-Layered Bicomponent Microfilament Composite Fabric for Highly Efficient Cold Protection

Functional thin fabric with highly efficient cold protection properties are attracting the great attention of long-term dressing in a cold environment. Herein, a tri-layered bicomponent microfilament composite fabric comprised of a hydrophobic layer of PET/PA@C6 F13 bicomponent microfilament webs, an adhesive layer of LPET/PET fibrous web, and a fluffy-soft layer of PET/Cellulous fibrous web is designed and also successfully been fabricated through a facile process of dipping, combined with thermal belt bonding. The prepared samples exhibit a large resistance to wetting of alcohol, a high hydrostatic pressure of 5530 Pa, and brilliant water slipping properties, owing to the presence of dense micropores ranging from 25.1 to 70.3 µm, as well as to the smooth surface with an arithmetic mean deviation of surface roughness (Sa) ranging from 5.112 to 4.369 µm. Besides, the prepared samples exhibited good water vapor permeability, and a tunable CLO value ranging from 0.569 to 0.920, in addition to the fact that it exhibited a very suitable working temperature range of -5 °C to 15 °C. Additionally, it also showed excellent clothing tailorability including high mechanical strength with a remarkably soft texture and lightweight foldability that suitable for cold outdoor clothing applications.

Sweat Gland-Inspired Skin-like Fabric with Directional Water Transport and Durability for Efficient Personal Moisture Management

Directional water transport textiles are an energy-free approach to improving the comfort of the human body. However, existing strategies mainly focus on enhancing the capacity of directional water transport, complicating the preparation process and limiting the long-term durability of textiles. Herein, a skin-like fabric inspired by sweat glands was prepared in one step by patterning printed hydrophobic paste on the fabric. This skin-like fabric has achieved the desired one-way water transport index (R, 721%), air permeability of 104 mm s-1, and water vapor transmission rate (298 g m-2 h-1). More significantly, due to the strong chemical bonds between the fabric and the coating, the skin-like fabric exhibited a high weight retention of 99.4% after 400 abrasion cycles and stable performance (R, 658%) after 25 h of washing. This work proposes a reliable way to prepare high-performance fabrics with durability, which show great potential for applications in functional textiles for personal moisture management.

Research progress in preparation, properties, and applications of medical protective fiber materials

A variety of public health events seriously threaten human life and health, especially the outbreak of COVID-19 at the end of 2019 has caused a serious impact on human production and life. Wearing personal protective equipment (PPE) is one of the most effective ways to prevent infection and stop the spread of the virus. Medical protective fiber materials have become the first choice for PPE because of their excellent barrier properties and breathability. In this article, we systematically review the latest progress in preparation technologies, properties, and applications of medical protective fiber materials. We first summarize the technological characteristics of different fiber preparation methods and compare their advantages and disadvantages. Then the barrier properties, comfort, and mechanical properties of the medical protective fiber materials used in PPE are discussed. After that, the applications of medical protective fibers in PPE are introduced, and protective clothing and masks are discussed in detail. Finally, the current status, future development trend, and existing challenges of medical protective fiber materials are summarized.

Nanopolyhybrids: Materials, Engineering Designs, and Advances in Thermal Management

The fundamental requirements for thermal comfort along with the unbalanced growth in the energy demand and consumption worldwide have triggered the development and innovation of advanced materials for high thermal-management capabilities. However, continuous development remains a significant challenge in designing thermally robust materials for the efficient thermal management of industrial devices and manufacturing technologies. The notable achievements thus far in nanopolyhybrid design technologies include multiresponsive energy harvesting/conversion (e.g., light, magnetic, and electric), thermoregulation (including microclimate), energy saving in construction, as well as the miniaturization, integration, and intelligentization of electronic systems. These are achieved by integrating nanomaterials and polymers with desired engineering strategies. Herein, fundamental design approaches that consider diverse nanomaterials and the properties of nanopolyhybrids are introduced, and the emerging applications of hybrid composites such as personal and electronic thermal management and advanced medical applications are highlighted. Finally, current challenges and outlook for future trends and prospects are summarized to develop nanopolyhybrid materials.

On-Chip Liquid Manipulation via a Flexible Dual-Layered Channel Possessing Hydrophilic/Hydrophobic Dichotomy

The hydrophilic/hydrophobic cooperative interface provides a smart platform to control liquid distribution and delivery. Through the fusion of flexibility and complex structure, we present a manipulable, open, and dual-layered liquid channel (MODLC) for on-demand mechanical control of fluid delivery. Driven by anisotropic Laplace pressure, the mechano-controllable asymmetric channel of MODLC can propel the directional slipping of liquid located between the paired tracks. Upon a single press, the longest transport distance can reach 10 cm with an average speed of ∼3 cm/s. The liquid on the MODLC can be immediately manipulated by pressing or dragging processes, and versatile liquid-manipulating processes on hierarchical MODLC chips have been achieved, including remote droplet magneto-control, continuous liquid distributor, and gas-producing chip. The flexible hydrophilic/hydrophobic interface and its assembly can extend the function and applications of the wettability-patterned interface, which should update our understanding of complex systems for sophisticated liquid transport.

Advances in the Robustness of Wearable Electronic Textiles: Strategies, Stability, Washability and Perspective

Flexible electronic textiles are the future of wearable technology with a diverse application potential inspired by the Internet of Things (IoT) to improve all aspects of wearer life by replacing traditional bulky, rigid, and uncomfortable wearable electronics. The inherently prominent characteristics exhibited by textile substrates make them ideal candidates for designing user-friendly wearable electronic textiles for high-end variant applications. Textile substrates (fiber, yarn, fabric, and garment) combined with nanostructured electroactive materials provide a universal pathway for the researcher to construct advanced wearable electronics compatible with the human body and other circumstances. However, e-textiles are found to be vulnerable to physical deformation induced during repeated wash and wear. Thus, e-textiles need to be robust enough to withstand such challenges involved in designing a reliable product and require more attention for substantial advancement in stability and washability. As a step toward reliable devices, we present this comprehensive review of the state-of-the-art advances in substrate geometries, modification, fabrication, and standardized washing strategies to predict a roadmap toward sustainability. Furthermore, current challenges, opportunities, and future aspects of durable e-textiles development are envisioned to provide a conclusive pathway for researchers to conduct advanced studies.