Nb2CTx MXene Cathode for High-Capacity Rechargeable Aluminum Batteries with Prolonged Cycle Lifetime

Revealing the chemical compatibility of common solvents and electrolytes with Mo2TiC2-based MXenes and their interfaces in aluminum-ion batteries (AIBs) through first-principles molecular dynamics simulations

Using the first-principles molecular dynamics simulations and CI-NEB calculations, we performed a systematic and comprehensive investigation on the chemical compatibility of various solvents (carbonate esters, aromatic solvents, ethers, carboxylic esters, water, DMSO and ionic liquids) and electrolytes (DMC-Al(OTF)3, DME-Al(OTF)3, GBL-Al(OTF)3, H2O-Al2(SO4)3, DMSO-Al(OTF)3, [EMIm]+Cl--[AlCl3] and urea-AlCl3) with Mo2TiC2-based MXenes, evaluating their possible use as solvents, additives and electrolytes in aluminum-ion batteries (AIBs). Among the investigated solvents, carbonate ester (DMC), chain ether (DME), aromatic hydrocarbons (benzene, toluene), chain carboxylic ester (GBL), DMSO, ionic liquids ([EMIm]+Cl-, [DMPI]+Cl- and [BMP]+Cl-) and urea showed very low reactivity towards both bare Mo2TiC2 and Al-terminated structures (Mo2TiC2Al2 and Mo2TiC2Al6 monolayers), indicating their excellent chemical compatibility between these solvents and the MXene cathode. Besides the Mo2TiC2 monolayer, a relatively low chemical reactivity was predicted for Al-terminated MXenes after their contact with almost all the solvents considered in this work, even with the relatively more reactive carbonate esters (PC and EC) and ethers (G2 and THF). The electrolytes DMC-Al(OTF)3 and ionic liquid ([EMIm]+Cl--AlCl3) exhibited high chemical compatibility with Mo2TiC2-based MXenes and exhibited promising electrochemical reactivity at the interface between the electrolyte and electrode. Alternatively, either the decomposition of the electrolyte components or the low electrochemical reactivity of Al3+ was observed in other electrolyte systems (DME-Al(OTF)3, GBL-Al(OTF)3, H2O-Al2(SO4)3, DMSO-Al(OTF)3 and urea-AlCl3), indicating poor reversibility and cyclic performance of AIBs.

Recent Progress in the Applications of MXene-Based Materials in Multivalent Ion Batteries

Multivalent-ion batteries have garnered significant attention as promising alternatives to traditional lithium-ion batteries due to their higher charge density and potential for sustainable energy storage solutions. Nevertheless, the slow diffusion of multivalent ions is the primary issue with electrode materials for multivalent-ion batteries. In this review, the suitability of MXene-based materials for multivalent-ion batteries applications is explored, focusing onions such as magnesium (Mg2+), aluminum (Al3+), zinc (Zn2+), and beyond. The unique structure of MXene offers large interlayer spacing and abundant surface functional groups that facilitates efficient ion intercalation and diffusion, making it an excellent candidate for multivalent-ion batteries electrodes with excellent specific capacity and power density. The latest advancements in MXene synthesis and engineering techniques to enhance its electrochemical performance have been summarized and discussed. With the versatility of MXenes and their ability to harness diverse multivalent ions, this review underscores the promising future of MXene-based materials in revolutionizing the landscape of multivalent-ion batteries.

The Reverse of Electrostatic Interaction Force for Ultrahigh-Energy Al-Ion batteries

The two-dimensional (2D) MXenes with sufficient interlayer spacing are promising cathode materials for aluminum-ion batteries (AIBs), yet the electrostatic repulsion effect between the surface negative charges and the active anions (AlCl4 - ) hinders the intercalation of AlCl4 - and is usually ignored. Here, we propose a charge regulation strategy for MXene cathodes to overcome this challenge. By doping N and Co, the zeta potential is gradually transformed from negative (Ti3 C2 Tx ) to near-neutral (Ti3 CNTx ), and finally positive (Ti3 CNTx @Co). Therefore, the electrostatic repulsion force can be greatly weakened between Ti3 CNTx and AlCl4 - , or even formed a strong electrostatic attraction between Ti3 CNTx @Co and AlCl4 - , which can not only accommodate more AlCl4 - ions in the Ti3 CNTx @Co interlayers to increase the capacity, but also solve the stacking and expansion problems. As a result, the optimized Al-MXene battery exhibits an ultrahigh capacity of up to 240 mAh g-1 (2-4 times the capacity of graphite cathode, 60-120 mAh g-1 ) and a potential ultrahigh energy density (432 Wh kg-1 , 2-4 times the value of graphite, 110-220 Wh kg-1 ) based on the mass of cathode materials, comparable to LiFePO4 -based lithium-ion batteries (350-450 Wh kg-1 , based on the mass of LiFePO4 ).

A Laser-Induced Mo2 CTx MXene Hybrid Anode for High-Performance Li-Ion Batteries

MXenes, a fast-growing family of two-dimensional (2D) transition metal carbides/nitrides, are promising for electronics and energy storage applications. Mo2 CTx MXene, in particular, has demonstrated a higher capacity than other MXenes as an anode for Li-ion batteries. Yet, such enhanced capacity is accompanied by slow kinetics and poor cycling stability. Herein, it is revealed that the unstable cycling performance of Mo2 CTx is attributed to the partial oxidation into MoOx with structural degradation. A laser-induced Mo2 CTx /Mo2 C (LS-Mo2 CTx ) hybrid anode has been developed, of which the Mo2 C nanodots boost redox kinetics, and the laser-reduced oxygen content prevents the structural degradation caused by oxidation. Meanwhile, the strong connections between the laser-induced Mo2 C nanodots and Mo2 CTx nanosheets enhance conductivity and stabilize the structure during charge-discharge cycling. The as-prepared LS-Mo2 CTx anode exhibits an enhanced capacity of 340 mAh g-1 vs 83 mAh g-1 (for pristine) and an improved cycling stability (capacity retention of 106.2% vs 80.6% for pristine) over 1000 cycles. The laser-induced synthesis approach underlines the potential of MXene-based hybrid materials for high-performance energy storage applications.

Anion Storage of MXenes

Recently, anion storage materials have gained significant attention owing to the widened cell voltage and additional anion storing capacity for a large energy density. MXenes are considered as the emerging anion storing materials owing to their sufficient interlayer spacing, rich surface chemistries, tunable structures, remarkable electrochemical properties, and mechanical integrity. Herein, a comprehensive review on the anion storage of MXenes covering their anion storage mechanism and state-of-the-art chemical strategies for the improved anion storage performances is reported. The recent progress of MXenes on aluminum ion batteries, metal halogen batteries, halogen ion batteries, and electrochemical electrode deionization is addressed. The scientific and technical challenges and the research direction into the anion storage of MXenes are also addressed and finally the authors' perspective on anion storage of MXenes is provided. Therefore, this review offers an insight into the rational design of MXenes for anion storage materials and the correlation of surface chemistries and structural modifications with anion storage properties for the applications into electrochemical energy storage and water purification.

Covalently Functionalized MXenes for Highly Sensitive Humidity Sensors

Transition metal carbides and nitrides (MXenes) are an emerging class of 2D materials, which are attracting ever-growing attention due to their remarkable physicochemical properties. The presence of various surface functional groups on MXenes' surface, e.g., F, O, OH, Cl, opens the possibility to tune their properties through chemical functionalization approaches. However, only a few methods have been explored for the covalent functionalization of MXenes and include diazonium salt grafting and silylation reactions. Here, an unprecedented two-step functionalization of Ti3 C2 Tx MXenes is reported, where (3-aminopropyl)triethoxysilane is covalently tethered to Ti3 C2 Tx and serves as an anchoring unit for subsequent attachment of various organic bromides via the formation of CN bonds. Thin films of Ti3 C2 Tx functionalized with linear chains possessing increased hydrophilicity are employed for the fabrication of chemiresistive humidity sensors. The devices exhibit a broad operation range (0-100% relative humidity), high sensitivity (0.777 or 3.035), a fast response/recovery time (0.24/0.40 s ΔH-1 , respectively), and high selectivity to water in the presence of saturated vapors of organic compounds. Importantly, our Ti3 C2 Tx -based sensors display the largest operating range and a sensitivity beyond the state of the art of MXenes-based humidity sensors. Such outstanding performance makes the sensors suitable for real-time monitoring applications.