Mitigation of Oxygen Evolution and Phase Transition of Li-Rich Mn-Based Layered Oxide Cathodes by Coating with Oxygen-Deficient Perovskite Compounds

Surface structure regulation toward anionic redox activation of Li1.20Mn0.533Ni0.133Co0.133O2 cathodes with high initial coulombic efficiency

Li-rich layered oxides cathodes (LLOs) as the promising next-generation cathode materials can provide ultrahigh capacity and energy density due to their distinctive anionic redox chemistry. Unfortunately, severe interfacial side reactions, surface structural degradation and sluggish Li+ kinetics have resulted in low initial coulombic efficiency (ICE), capacity decay and poor rate performance, restricting their practical applications for high-energy-density lithium-ion batteries. Herein, Surface structure regulation strategy used as surface modified agent is proposed to activate the anionic redox chemistry via ammonium tungstate treatment. Experimental results showcase that dual coating layer spinel-like structure LiMn2O4 and Li2WO4 have been successfully constructed on the surface of LLOs. The surface spinel-like structure providing 3 D Li+ diffusion channels together with fast-ion conductive layer decrease the interfacial Li+ diffusion barrier and boost the fasting Li+ kinetics. In addition, the in-situ reconstruction layer can further alleviate the interfacial side reactions and reinforce the surface structural stability. As a result, the ICE of modified LLOs can be precisely increased from 74.71 % to 107.42 % with the adjustment of ammonium tungstate usage. Moreover, it delivers a high reversible capacity of 279.5 mAh/g at 0.1 C, as well as excellent rate capability with capacity of 147.2 mAh/g at 5 C. This work provides a significant reference for designing high-energy-density LLOs via surface structure regulation strategy.

High-Performance Single-Crystal Lithium-Rich Layered Oxides Cathode Materials via Na2WO4-Assisted Sintering

Single-crystal lithium-rich layered oxides (LLOs) with excellent mechanical properties can enhance their crystal structure stability. However, the conventional methods for preparing single-crystal LLOs, require large amounts of molten salt additives, involve complicated washing steps, and increase the difficulty of large-scale production. In this study, a sodium tungstate (Na2WO4)-assisted sintering method is proposed to fabricate high-performance single-crystal LLOs cathode materials without large amounts of additives and additional washing steps. During the sintering process, Na2WO4 promotes particle growth and forms a protective coating on the surface of LLOs particles, effectively suppressing the side reactions at the cathode/electrolyte interface. Additionally, trace amounts of Na and W atoms are doped into the LLOs lattice via gradient doping. Experimental results and theoretical calculations indicate that Na and W doping stabilizes the crystal structure and enhances the Li+ ions diffusion rate. The prepared single-crystal LLOs exhibit outstanding capacity retention of 82.7% (compared to 65.0%, after 200 cycles at 1 C) and a low voltage decay rate of 0.76 mV per cycle (compared to 1.80 mV per cycle). This strategy provides a novel pathway for designing the next-generation high-performance cathode materials for Lithium-ion batteries (LIBs).

Suppressing Bulk Strain and Surface O2 Release in Li-Rich Cathodes by Just Tuning the Li Content

Layered oxides represent a prominent class of cathodes employed in lithium-ion batteries. The structural degradation of layered cathodes causes capacity decay during cycling, which is generally induced by anisotropic lattice strain in the bulk of cathode particle and oxygen release at the surface. However, particularly in lithium-rich layered oxides (LLOs) that undergo intense oxygen redox reactions, the challenge of simultaneously addressing bulk and surface issues through a singular modification technique remains arduous. Here a thin (1-nm) and coherent spinel-like phase is constructed on the surface of LLOs particle to suppress bulk strain and surface O2 release by just adjusting the amount of lithium source during synthesis. The spinel-like phase hinders the surface O2 release by accommodating O2 inside the surface layer, while the trapped O2 in the bulk impedes strain evolution by ≈70% at high voltages compared with unmodified LLOs. Consequently, the enhanced structural stability leads to an improved capacity retention of 97.6% and a high Coulombic efficiency of ≈99.5% after 100 cycles at 0.1°C. These findings provide profound mechanistic insights into the functioning of surface structure and offer guidance for synthesizing high-capacity cathodes with superior cyclability.

Oxygen-deficient TiO2-x interlayer enabling Li-rich Mn-based layered oxide cathodes with enhanced reversible capacity and cyclability

The unique anion redox mechanism of Li-rich Mn-based layered oxide (LMLO) cathodes endows them with a higher specific capacity compared with conventional cathodes. However, the irreversible anion redox reactions can cause structural degradation and sluggish electrochemical kinetics in the cathode, resulting in a poor electrochemical performance in the batteries. Thus, to address these issues, a single-sided conductive oxygen-deficient TiO2-x interlayer was applied on a commercial Celgard separator as a coating layer towards the LMLO cathode. After coating TiO2-x, the initial coulombic efficiency (ICE) of the cathode increased from 92.1% to 95.8%, the capacity retention improved from 84.2% to 91.7% after 100 cycles, and the rate performance of the cathode was significantly enhanced from 91.3 mA h g-1 to 203.9 mA h g-1 at 5C. Operando differential electrochemical mass spectroscopy (DEMS) showed that the coating layer could restrain the release of oxygen in the battery, especially from the initial formation process. The X-ray photoelectron spectroscopy (XPS) results demonstrated that the favorable oxygen absorption by the TiO2-x interlayer benefitted the suppression of side reactions and cathode structural evolution and favored the formation of a uniform cathode-electrolyte interphase on the LMLO cathode. This work provides an alternative path to address the issue of oxygen release in LMLO cathodes.

Inhibition of Structural Transformation and Surface Lattice Oxygen Activity for Excellent Stability Li-Rich Mn-Based Layered Oxides

Li-rich Mn-based layered oxides (LLOs) are one of the most promising cathode materials, which have exceptional anionic redox activity and a capacity that surpasses 250 mA h/g. However, the change from a layered structure to a spinel structure and unstable anionic redox are accompanied by voltage attenuation, poor rate performance, and problematic capacity. The technique of stabilizing the crystal structure and reducing the surface oxygen activity is proposed in this paper. A coating layer and highly concentrated oxygen vacancies are developed on the material's surface, according to scanning electron microscopy, transmission electron microscopy, and X-ray photoelectron spectroscopy. In situ EIS shows that structural transformation and oxygen release are inhibited during the first charge and discharge. Optimized 3@LRMA has an average attenuation voltage of 0.55 mV per cycle (vs 1.7 mV) and a capacity retention rate of 93.4% after 200 cycles (vs 52.8%). Postmortem analysis indicates that the successful doping of Al ions into the crystal structure effectively inhibits the structural alteration of the cycling process. The addition of oxygen vacancies reduces the surface lattice's redox activity. Additionally, surface structure deterioration is successfully halted by N- and Cl-doped carbon coating. This finding highlights the significance of lowering the surface lattice oxygen activity and preventing structural alteration, and it offers a workable solution to increase the LLO stability.