Hypromellose-graft-chitosan and Its Polyelectrolyte Complex as Novel Systems for Sustained Drug Delivery

Non-antibiotic dependent photothermal antibacterial hemostatic MXene hydrogel for infectious wounds healing

On account of the existence of antibiotic resistance, the wound healing of pathogenic infection is still a challenge in modern society. A desirable wound dressing should own the abilities of adhesiveness, hemostasis and good mechanical property, meanwhile the property of eliminating bacteria without side effects is also highly needed. In this work, we established a kind of hydrogel based on carboxymethyl cellulose-graft-tyramine (CMC-Ty) and MXene (Ti3C2Tx) through employing H2O2/HRP (horseradish peroxidase) as the initiator, then the as-prepared hydrogel (named CMC-Ty/MXene) was immersed in tannic acid (TA) solution, and this TA-treated hydrogel was called CMC-Ty/MXene+TA. By employing TA as the multi-functional H-bond provider, the adhesiveness, hemostatic ability, mechanical property and bactericidal performance of the hydrogel was enhanced. And MXene in this system exerted benign photothermal antimicrobial performance, it was able to transform near-infrared (NIR) light into heat, then the bacteria would be physically damaged (thermal destruction) due to the hyperthermy, hence the antibacterial effect of which will not be restricted by antibiotic resistance. The temperature of the hydrogel in the experimental group can be increased by 25 °C after irradiation by 808 nm NIR light for 10 min, and the bactericidal efficiency against both E. coli and S. aureus reached >99 %. In vivo tests demonstrated that with the assistance of NIR irradiation, the hydrogel can distinctly accelerate the S. aureus infected wound closure. We envisage that this non-antibiotic dependent multifunctional photothermal hydrogel can provide a promise for bacteria-invaded wound healing.

Ionically crosslinked composite gels containing amine-functionalized CoFe2O4 nanoparticles as a bioactive and pH-responsive drug delivery system

Composite gels are a type of soft matter, which contains a continuous three-dimensional crosslinked network and has been embedded with non-gel materials. Compared to pure gels, composite gels show high flexibility and tunability in properties and hence have attracted extensive interest in applications ranging from cancer therapy to tissue engineering. In this study, we incorporated triethylenetetramine (TETA)-functionalized cobalt ferrite nanoparticles (ANPs) into a hydrogel consisting of sodium alginate (SA) and methyl cellulose (MC), and examined the resulting composite gels for controlled drug release. The structural, thermal, and morphological aspects of the composite gels were characterized to confirm successful nanoparticle incorporation. Swelling and degradation data demonstrated the pH-responsiveness and enhanced stability of the composite gels. Along with their controlled drug release profiles and their ROS-generating capacity, our composite gels warrant further development as promising bioactive carriers for pharmaceutical applications.

Porous starch microspheres loaded with luteolin exhibit hypoglycemic activities and alter gut microbial communities in type 2 diabetes mellitus mice

Luteolin (LUT), a natural flavonoid known for its hypoglycemic properties, is primarily sourced from vegetables such as celery and broccoli. However, its poor stability and low bioavailability in the upper digestive tract hinder its application in the functional food industry. To address these challenges, this study employed porous starch (PS) as a carrier to develop PS microspheres loaded with luteolin (PSLUT), simulating its release in vitro. The research assessed the hypoglycemic effects of LUT in type 2 diabetes mellitus (T2DM) mice both before and after PS treatment. In vitro findings demonstrated that PS improved LUT's stability in simulated gastric fluids and enhanced its in vivo bioavailability, aligning with experimental outcomes. PSLUT administration significantly improved body weight, fasting blood glucose (FBG), oral glucose tolerance test (OGTT), pancreatic islet function, and other relevant indicators in T2DM mice. Moreover, PSLUT alleviated abnormal liver biochemical indicators and liver tissue injury caused by T2DM. The underlying hypoglycemic mechanism of PSLUT is thought to involve the regulation of protein kinase B (AKT-1) and glucose transporter 2 (GLUT-2). After four weeks of intervention, various PSLUT doses significantly reduced the Firmicutes to Bacteroidetes ratio at the phylum level and decreased the relative abundance of harmful bacteria at the genus level, including Acetatifactor, Candidatus-Arthromitus, and Turicibacter. This microbial shift was associated with improvements in hyperglycemia-related indicators such as FBG, the area under the curve (AUC) of OGTT, and homeostasis model assessment of insulin resistance (HOMA-IR), which are closely linked to these bacterial genera. Additionally, Lachnoclostridium, Parasutterella, Turicibacter, and Papillibacter were identified as key intestinal marker genera involved in T2DM progression through Spearman correlation analysis. In conclusion, PS enhanced LUT's hypoglycemic efficacy by modulating the transcription and protein expression levels of AKT-1 and GLUT-2, as well as the relative abundance of potential gut pathogens in T2DM mice. These results provide a theoretical foundation for advancing luteolin's application in the functional food industry and further investigating its hypoglycemic potential.

Form Equals Function: Influence of Coacervate Architecture on Drug Delivery Applications

Complex coacervates, formed through electrostatic interactions between oppositely charged polymers, present a versatile platform for drug delivery, providing rapid assembly, selective encapsulation, and responsiveness to environmental stimuli. The architecture and properties of coacervates can be tuned by controlling structural and environmental design factors, which significantly impact the stability and delivery efficiency of the drugs. While environmental design factors such as salt, pH, and temperature play a crucial role in coacervate formation, structural design factors such as polymer concentration, polymer structure, mixing ratio, and chain length serve as the core framework that shapes coacervate architecture. These elements modulate the phase behavior and material properties of coacervates, allowing for a highly tunable system. In this review, we primarily analyze how these structural design factors contribute to the formation of diverse coacervate architecture, ranging from bulk coacervates to polyion complex micelles, vesicles, and cross-linked gels, though environmental design factors are considered. We then examine the effectiveness of these architectures in enhancing the delivery and efficacy of drugs across various administration routes, such as noninvasive (e.g., oral and transdermal) and invasive delivery. This review aims to provide foundational insights into the design of advanced drug delivery systems by examining how the origin and chemical structure of polymers influence coacervate architecture, which in turn defines their material properties. We then explore how the architecture can be tailored to optimize drug delivery for specific administration routes. This approach leverages the intrinsic properties derived from the coacervate architecture to enable targeted, controlled, and efficient drug release, ultimately enhancing therapeutic outcomes in precision medicine.

Controllable Drug-Release Ratio and Rate of Doxorubicin-Loaded Natural Composite Films Based on Polysaccharides: Evaluation of Transdermal Permeability Potential

In drug delivery systems, it is crucial to develop a drug carrier capable of regulating both the drug-release rate and the drug-release ratio. This study proposes a method for controlling the drug-release ratio/rate using doxorubicin-loaded natural composite films composed of polysaccharides (cellulose, chitin, chitosan, or cellulose nanocrystal) and mineral substances (MMT: montmorillonite). We succeeded in controlling the doxorubicin release ratio from 25 to 88% depending on the natural polysaccharide. Likewise, the reduction rate differed depending on the type of natural polysaccharide, whereas the reduction in release was achieved by mixing MMT. Cellulose had the largest reduction in the drug release ratio, approximately 30%, and cellulose nanocrystals showed little change. Furthermore, we conducted a skin permeation test on the natural polysaccharide film with the highest release rate to confirm its transdermal permeability potential. The polysaccharide doxorubicin-loaded film sustainably released doxorubicin for 2 days, which indicated the potential of a carrier for DDS applications.

Microarray needles comprised of arginine-modified chitosan/PVA hydrogel for enhanced antibacterial and wound healing potential of curcumin

Wound healing is a multifaceted and complex process that includes inflammation, hemostasis, remodeling, and granulation. Failures in any link may cause the healing process to be delayed. As a result, wound healing has always been a main research focus across the entire medical field, posing significant challenges and financial burdens. Hence, the current investigation focused on the design and development of arginine-modified chitosan/PVA hydrogel-based microneedles (MNs) as a curcumin (CUR) delivery system for improved wound healing and antibacterial activity. The substrate possesses exceptional swelling capabilities that allow tissue fluid from the wound to be absorbed, speeding up wound closure. The antibacterial activity of MNs was investigated against S. aureus and E. coli. The results revealed that the developed CUR-loaded MNs had increased antioxidant activity and sustained drug release behavior. Furthermore, after being loaded in the developed MNs, it revealed improved antibacterial activity of CUR. Wound healing potential was assessed by histopathological analysis and wound closure%. The observed results suggest that the CUR-loaded MNs greatly improved wound healing potential via tissue regeneration and collagen deposition, demonstrating the potential of developed MNs patches to be used as an effective carrier for wound healing in healthcare settings.

Chitosan tamarind-based nanoparticles as a promising approach for topical application of curcumin intended for burn healing: in vitro and in vivo study

One of the most prevalent worldwide problems that affect all ages and genders is skin burn. The goal of our study was to assess the ability of curcumin nanoparticles to cure a rat burn model. Three formulations were selected after several tests were performed including investigation of encapsulation efficiency, particle size and zeta potential measurements. In vitro release was achieved on the three selected formulations. The effectiveness of the chosen formulation for healing was evaluated. The induced burn wound was smeared, starting just after excision, once daily with curcumin nanoparticles for 18 days. Our findings revealed that curcumin nanoparticles improved the burn healing potential by augmenting the skin regeneration indices as evidenced by enhancing the new production of hyaluronic acid and collagen type I. Additionally, curcumin nanoparticles could increase levels of vascular endothelial growth factor and alpha smooth muscle activity while drastically reducing the skin's tumour necrosis factor content, revealing a significant potential for burn healing process that is also reflected in the histopathological and immunohistochemical studies. Finally, our results demonstrated that curcumin nanoparticles revealed a significant potential for burn healing than curcumin alone due to its potent antimicrobial, antioxidant and anti-inflammatory properties.

A Novel Family of Stable Polyelectrolyte Complexes Based on Mixed Olefins-Maleic Anhydride Copolymer

In the present study, the copolymer of mixed olefins included in unetherified gasoline and maleic anhydride (PUGM) was prepared by self-stabilized precipitation polymerization (2SP) and employed for the synthesis of a new family of stable polyelectrolyte complexes (PECs). Polyanionic saponified PUGM partially grafted with methoxy poly(ethylene glycol) (PUGMS-g-mPEG) and polycationic quaternized PUGM (PUGMQ) were both derived from PUGM via the facile modification of anhydride groups. The particle size, zeta potential, morphology, and stability of self-assembled PEC particles were investigated thoroughly. Strikingly, the introduction of long mPEG side chains (M_n = 4000) had a remarkable effect on the self-assembled particles, which displayed a constant particle size of ∼200 nm regardless of varying n+/n-. Moreover, it also enhanced the salt tolerance and long-term stability of PEC particles significantly. Our work not only provides an effective approach to PECs from petroleum resources with low cost but also deepens the understanding of the relationship between the chain structure of polyelectrolytes and the stability of PECs.

A self-indicating and antibacterial gelatine-chitosan blended hydrogel enabling real-time quality control and sustained bioactive agent delivery

Hydrogels are one type of materials that are widely exploited for bioactive agent delivery, partly owing to their high biocompatibility and low toxicity. When hydrogels are used as carriers, their performance in agent loading and sustained agent release are predominately determined by the gel structure, which can be largely affected by variations during gel preparation. Till now, effective and easy methods to enable monitoring of such variations in real time have been lacking, making quality control of the generated gel-based carrier technically challenging. To address this technical gap, in this study we take advantage of the clusteroluminogenic properties of gelatine and chitosan to generate a crosslinked blended hydrogel which not only shows intrinsic antibacterial properties and high tunability in delivery performance but also shows a self-indicating capacity to enable quality control during hydrogel preparation. Upon fitting the curves of agent release into different kinetic models, the release profiles of the agent-loaded gels have been found to follow the Higuchi model well, with the non-Fickian mechanism being the major mechanism of the release process. Along with their high efficiency in agent loading, our gels warrant further exploitation for use in bioactive agent delivery and related biomedical applications.

Application Progress of Modified Chitosan and Its Composite Biomaterials for Bone Tissue Engineering

In recent years, bone tissue engineering (BTE), as a multidisciplinary field, has shown considerable promise in replacing traditional treatment modalities (i.e., autografts, allografts, and xenografts). Since bone is such a complex and dynamic structure, the construction of bone tissue composite materials has become an attractive strategy to guide bone growth and regeneration. Chitosan and its derivatives have been promising vehicles for BTE owing to their unique physical and chemical properties. With intrinsic physicochemical characteristics and closeness to the extracellular matrix of bones, chitosan-based composite scaffolds have been proved to be a promising candidate for providing successful bone regeneration and defect repair capacity. Advances in chitosan-based scaffolds for BTE have produced efficient and efficacious bio-properties via material structural design and different modifications. Efforts have been put into the modification of chitosan to overcome its limitations, including insolubility in water, faster depolymerization in the body, and blood incompatibility. Herein, we discuss the various modification methods of chitosan that expand its fields of application, which would pave the way for future applied research in biomedical innovation and regenerative medicine.

Weak Polyelectrolytes as Nanoarchitectonic Design Tools for Functional Materials: A Review of Recent Achievements

The ionization degree, charge density, and conformation of weak polyelectrolytes can be adjusted through adjusting the pH and ionic strength stimuli. Such polymers thus offer a range of reversible interactions, including electrostatic complexation, H-bonding, and hydrophobic interactions, which position weak polyelectrolytes as key nano-units for the design of dynamic systems with precise structures, compositions, and responses to stimuli. The purpose of this review article is to discuss recent examples of nanoarchitectonic systems and applications that use weak polyelectrolytes as smart components. Surface platforms (electrodeposited films, brushes), multilayers (coatings and capsules), processed polyelectrolyte complexes (gels and membranes), and pharmaceutical vectors from both synthetic or natural-type weak polyelectrolytes are discussed. Finally, the increasing significance of block copolymers with weak polyion blocks is discussed with respect to the design of nanovectors by micellization and film/membrane nanopatterning via phase separation.

Biocompatible nanocarriers for passive transdermal delivery of insulin based on self-adjusting N-alkylamidated carboxymethyl cellulose polysaccharides

In this work, we present biocompatible nanocarriers based on modified polysaccharides capable of transporting insulin macromolecules through human skin without any auxiliary techniques. N-Alkylamidated carboxymethyl cellulose (CMC) derivatives CMC-6 and CMC-12 were synthesized and characterized using attenuated total reflectance Fourier transform infrared (ATR-FTIR) and nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography and thermogravimetric, calorimetric and microscopic techniques. The prepared modified polysaccharides spontaneously assemble into soft nanoaggregates capable of adjusting to both aqueous and lipid environments. Due to this remarkable self-adjustment ability, CMC-6 and CMC-12 were examined for transdermal delivery of insulin. First, a significant increase in the amount of insulin present in lipid media upon encapsulation in CMC-12 was observed in vitro. Then, ex vivo studies on human skin were conducted. Those studies revealed that the CMC-12 carrier led to an enhancement of transdermal insulin delivery, showing a remarkable 85% insulin permeation. Finally, toxicity studies revealed no alteration in epidermal viability upon treatment and the absence of any skin irritation or amplified cytokine release, verifying the safety of the prepared carriers. Three-dimensional (3D) molecular modeling and conformational dynamics of CMC-6 and CMC-12 polymer chains explained their binding capacities and the ability to transport insulin macromolecules. The presented carriers have the potential to become a biocompatible, safe and feasible platform for the design of effective systems for transdermal delivery of bioactive macromolecules in medicine and cosmetics. In addition, transdermal insulin delivery reduces the pain and infection risk in comparison to injections, which may increase the compliance and glycemic control of diabetic patients.

Controllable fabrication of alginate/poly-L-ornithine polyelectrolyte complex hydrogel networks as therapeutic drug and cell carriers

Polyelectrolyte complex (PEC) hydrogels are advantageous as therapeutic agent and cell carriers. However, due to the weak nature of physical crosslinking, PEC swelling and cargo burst release are easily initiated. Also, most current cell-laden PEC hydrogels are limited to fibers and microcapsules with unfavorable dimensions and structures for practical implantations. To overcome these drawbacks, alginate (Alg)/poly-L-ornithine (PLO) PEC hydrogels are fabricated into microcapsules, fibers, and bulk scaffolds to explore their feasibility as drug and cell carriers. Stable Alg/PLO microcapsules with controllable shapes are obtained through aqueous electrospraying technique, which avoids osmotic shock and prolongs the release time. Model enzyme and nanosized cargos are successfully encapsulated and continuously released for more than 21 days. Alg/PLO PEC fibers are then prepared to encapsulate brown adipose progenitors (BAPs) and Jurkat T cells. The electrostatic interactions between Alg and PLO are found to facilitate the printability and self-support ability of Alg/PLO bioinks. Alg/PLO PEC fibers and scaffolds support cell proliferation, differentiation, and functionalization. These results demonstrate new options for biocompatible PEC hydrogel preparation and improve the understanding of PEC hydrogels as drug and cell carriers. STATEMENT OF SIGNIFICANCE: In this study, the concept of polyelectrolyte complex hydrogel networks as drug and cell carriers has been demonstrated. Their feasibility to achieve sustained drug release and cell functionality was explored, from microcapsules to fibers to three-dimension printed scaffolds. PEC microcapsules with controllable shapes were obtained. Therapeutic drugs can be encapsulated and continuously release for more than 21 days. Benefiting from the dynamic interactions of physically crosslinked PEC, self-healing fibers were achieved. Besides, the electrostatic interactions between polyelectrolytes were found to facilitate the printability and self-support ability of PEC bioinks. The PEC fibers and scaffolds with controllable structure supported cell proliferation, differentiation, and function. The outcome of current research promotes design of new biocompatible PEC hydrogels and potential drug and cell carriers.

Recent advances in assembled AIEgens for image-guided anticancer therapy

Image-guided therapy, with simultaneous imaging and therapy functions, has the potential to greatly enhance the therapeutic efficacy of anticancer therapy, and reduce the incidence of side effects. Fluorescence imaging has the advantages of easy operation, abundant signal, high contrast, and fast response for real-time and non-invasive tracking. Luminogens with aggregation-induced emission characteristics (AIEgens) can emit strong luminescence in an aggregate state, which makes them ideal materials to construct applicative fluorophores for fluorescence imaging. The opportunity for image-guided cancer treatment has inspired researchers to explore the theranostic application of AIEgens combined with other therapy methods. In recent years, many AIEgens with efficient photosensitizing or photothermal abilities have been designed by precise molecular engineering, with superior performance in image-guided anticancer therapy. Owing to the hydrophobic property of most AIEgens, an assembly approach has been wildly utilized to construct biocompatible AIEgen-based nanostructures in aqueous systems, which can be used for image-guided anticancer therapy. In the present review, we summarize the recent advances in the assembled AIEgens for image-guided anticancer therapy. Five types of image-guided anticancer therapy using assembled AIEgens are included: chemotherapy, photodynamic therapy, photothermal therapy, gene therapy, and synergistic therapy. Moreover, a brief conclusion with the discussion of current challenges and future perspectives in this area is further presented.

Persistent Micelle Corona Chemistry Enables Constant Micelle Core Size with Independent Control of Functionality and Polyelectrolyte Response

Polymer micelles have found significant uses in areas such as drug/gene delivery, medical imaging, and as templates for nanomaterials. For many of these applications, the micelle performance depends on its size and chemical functionalization. To date, however, these parameters have often been fundamentally coupled since the equilibrium size of a micelle is a function of the chemical composition in addition to other parameters. Here, we demonstrate a novel processing pathway allowing for the chemical modification to the corona of kinetically trapped "persistent" polymer micelles, termed Persistent Micelle Corona Chemistry (PMCC). Judicious planning is crucial to this size-controlled functionalization where each step requires all reagents and polymer blocks to be compatible with (1) the desired chemistry, (2) micelle persistency, and (3) micelle dispersion. A desired functionalization can be implemented with PMCC by pairing the synthetic planning with polymer solubility databases. Specifically, poly(cyclohexyl methacrylate-b-(diethoxyphosphoryl)methyl methacrylate) (PCHMA-b-PDEPMMA) was prepared to combine a glassy-core block (PCHMA) for kinetic control with a block (PDEPMMA) that is able to be hydrolyzed to yield acid groups. The processing sequence determines the resulting micelle size distribution where the hydrolyzed-then-micellized sequence yields widely varying micelle dimensions due to equilibration. In contrast, the micellized-then-hydrolyzed sequence maintains kinetically trapped micelles throughout the PMCC process. Statistically significant transmission electron microscopy (TEM) measurements demonstrate that PMCC uniquely enables this functionalization with constant average micelle core dimensions. Furthermore, these kinetically trapped micelles also subsequently maintain constant micelle core size when modifying the Coulombic interactions of the micelle corona via pH changes.

Preparation and characterization of 2-hydroxyethyl starch microparticles for co-delivery of multiple bioactive agents

The present study reports the generation of 2-hydroxyethyl starch microparticles for co-delivery and controlled release of multiple agents. The obtained microparticles are characterized by using Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction analysis, energy-dispersive X-ray spectroscopy, and scanning electron microscopy. By using ofloxacin and ketoprofen as drug models, the release sustainability of the microparticles is examined at pH 1.2, 5.4, and 6.8 at 37 °C, with Fickian diffusion being found to be the major mechanism controlling the kinetics of drug release. Upon being loaded with the drug models, the microparticles show high efficiency in acting against Escherichia coli and Bacillus cereus. The results suggest that our reported microparticles warrant further development for applications in which co-administration of multiple bioactive agents is required.

Antibacterial and clusteroluminogenic hypromellose-graft-chitosan-based polyelectrolyte complex films with high functional flexibility for food packaging

Food packaging can extend the shelf life of food products and enhance the safety and quality of the food. This study reports food-grade polyelectrolyte complex films generated via electrostatic interactions between two cellulose-based agents [viz., hypromellose-graft-chitosan, and carmellose sodium]. At optimal conditions, our films show good barrier properties, high transparency, and high efficiency in post-production agent loading. They also demonstrate intrinsic antibacterial effects against both Gram-negative and Gram-positive bacteria. By using frozen chicken breasts as a model, the films enable real-time monitoring of the status of the frozen food due to the property of clusterisation-triggered emission. Along with their negligible toxicity, our films warrant further development as multi-functional films for effective and self-indicating food packaging.

Novel procyanidins-loaded chitosan-graft-polyvinyl alcohol film with sustained antibacterial activity for food packaging

Active food packaging materials containing procyanidins (PC) exhibits outstanding antimicrobial activity, but PC is easy to be hydrolyzed by acid. A novel water-soluble chitosan (CS)-based copolymer was prepared to be used as a carrier to provide a pH-stable environment for loading PC. CS was copolymerized with polyvinyl alcohol (PVA) via a coupling reagent-mediated approach. The CS-graft-PVA film exhibited a desirable PC encapsulation efficiency of over 95% and excellent long-term release sustainability, which was better than the conventional CS and CS-blend-PVA films. Moreover, CS-graft-PVA film had satisfactory mechanical properties and barrier properties, as well possessed a desirable antibacterial activity and biofilm inhibition against foodborne pathogenic microbes and spoilage bacteria. The film was also applied in the salmon muscle perseveration and showed a potential ability to prevent microorganism contamination and texture deterioration in 10 days. These results suggested that the CS-graft-PVA film has an excellent promise for future food packaging applications.

Highly efficient sunitinib release from pH-responsive mHPMC@Chitosan core-shell nanoparticles

This study reports developing novel smart drug delivery systems (DDS) that have great importance in anticancer therapeutics. The magnetic hydroxypropyl methylcellulose (mHPMC) synthesized via in situ method and introduced in the fabrication of tripolyphosphate (TPP)-cross-linked chitosan core-shell nano-carriers (mHPMC@Chitosan). The TPP-cross-linked mHPMC@Chitosan nano-carriers then characterized using TEM, SEM/EDS, DLS, XPS, FTIR, TGA, XRD, and VSM. The encapsulation efficiency showed high capacity of loading for sunitinib malate (above 86 % for all samples). At pH 7.4, the minimum content of drug release was observed for all samples fabricated with variable contents of chitosan. At pH 4.5, the effect of chitosan content revealed that the rate of sunitinib release tends to decrease as its content increased. During two days, 44 and 93 % of the loaded sunitinib released from carriers containing high and low contents of chitosan, respectively. Besides, this mHPMC@Chitosan core shell nano-carrier shown pH-sensitive drug release.

Development of Hydrogels with Self-Healing Properties for Delivery of Bioactive Agents

Hydrogels are an important class of soft materials that find use in bioactive agent delivery. Because of their high water content, hydrogels generally show poor mechanical strength. Long-term wear and tear in physiological conditions may lead to damage in the hydrogel structure during the delivery of bioactive agents. This results in burst and uncontrolled agent release. One strategy to solve this problem is to incorporate self-healing properties into a hydrogel so that the hydrogel can heal fractures automatically to restore original mechanical properties. The objectives of this article are to revisit the latest advances in the design of self-healing hydrogel-based carriers and to offer insights into further research to translate these carriers from the laboratory to real applications.

Evaluation of Antitumor Efficacy of Chitosan-Tamarind Gum Polysaccharide Polyelectrolyte Complex Stabilized Nanoparticles of Simvastatin

PURPOSE

The present study was intended to fabricate chitosan (Ch)-tamarind gum polysaccharide (TGP) polyelectrolyte complex stabilized cubic nanoparticles of simvastatin and evaluate their potential against human breast cancer cell lines.

MATERIALS AND METHODS

The antisolvent precipitation method was used for formulation of nanoparticles. Factorial design (32) was utilized as a tool to analyze the effect of Ch and TGP concentration on particle size and entrapment efficiency of nanoparticles.

RESULTS

Formulated nanoparticles showed high entrapment efficiency (67.19±0.42-83.36±0.23%) and small size (53.3-383.1 nm). The present investigation involved utilization of two biological membranes (egg and tomato) as biological barriers for drug release. The study revealed that drug release from tomato membranes was retarded (as compared to egg membranes) but the release pattern matched that of egg membranes. All formulations followed the Baker-Lansdale model of drug release irrespective of the two different biological barriers. Stability studies were carried out for 45 days and exhibited less variation in particle size as well as a reduction in entrapment efficiency. Simvastatin loaded PEC stabilized nanoparticles exhibited better control on growth of human breast cancer cell lines than simple simvastatin. An unusual anticancer effect of simvastatin nanoparticles is also supported by several other research studies.

CONCLUSION

The present study involves first-time synthesis of Ch-TGP polyelectrolyte complex stabilized nanoparticles of simvastatin against MCF-7 cells. It recommends that, in future, theoretical modeling and IVIVC should be carried out for perfect designing of delivery systems.

Chitosan grafted/cross-linked with biodegradable polymers: A review

Public perception of polymers has been drastically changed with the improved plastic management at the end of their life. However, it is widely recognised the need of developing biodegradable polymers, as an alternative to traditional petrochemical polymers. Chitosan (CH), a biodegradable biopolymer with excellent physiological and structural properties, together with its immunostimulatory and antibacterial activity, is a good candidate to replace other polymers, mainly in biomedical applications. However, CH has also several drawbacks, which can be solved by chemical modifications to improve some of its characteristics such as solubility, biological activity, and mechanical properties. Many chemical modifications have been studied in the last decade to improve the properties of CH. This review focussed on a critical analysis of the state of the art of chemical modifications by cross-linking and graft polymerization, between CH or CH derivatives and other biodegradable polymers (polysaccharides or proteins, obtained from microorganisms, synthetized from biomonomers, or from petrochemical products). Both techniques offer the option of including a wide variety of functional groups into the CH chain. Thus, enhanced and new properties can be obtained in accordance with the requirements for different applications, such as the release of drugs, the improvement of antimicrobial properties of fabrics, the removal of dyes, or as scaffolds to develop bone tissues.

Injectable hydrogels of newly designed brush biopolymers as sustained drug-delivery vehicle for melanoma treatment

Novel biocompatible and brush copolymers have been developed for cancer treatment using its controlled drug-release potential. Polyurethane graft on linear dextrin has been synthesized to control the hydrophilic-hydrophobic balance for regulated drug delivery. The properties of the graft copolymers have been tuned through graft density. The prepared grafts are thermally stable and mechanically strong. An injectable hydrogel has been developed by embedding the drug-loaded brush copolymers in methyl cellulose to better control the release for a prolonged period, importantly by keeping the drug release at a constant rate. Cellular studies indicate the biocompatible nature of the brush copolymers whose controlled and slow release of drug exhibit significant cytotoxic effects on cancer cells. Endocytosis of drug tagged contrast agent indicates greater transport of biologically active material inside cell as observed through cellular uptake studies. In vivo studies on melanoma mice exhibit the real efficacy of the controlled drug release from the injectable hydrogel with significant melanoma suppression without any side effects as opposed to severe toxic effects observed in conventional chemotherapy. Special application method of drug-loaded hydrogel just beneath the tumor makes this system incredibly effective through confinement. Thus, brush copolymer injectable hydrogel is a promising vehicle for control release of drug for cancer treatment in future.

A Bioinspired, Sustained-Release Material in Response to Internal Signals for Biphasic Chemical Sensing in Wound Therapy

Biofluorescence in living entities is a functional process associated with information conveyance; whereas the capacity to respond to internal physiological signals is a unique property of a cell. By integrating these two biological features into materials design, a bioinspired material, namely CPS, is developed. Contrary to conventional luminescent polymeric systems whose emission comes from π-conjugated structures, this material displays clusterization-triggered emission. In the preclinical trial on a dermal punch model of tissue repair, it successfully increases the rate of wound closure, reduces inflammatory cell infiltration, and enhances collagen deposition. It can also relay changes in internal chemical signals into changes in its intrinsic luminescence for biphasic chemical sensing to prevent possible occurrence of skin hyperpigmentation caused by minocycline hydrochloride in wound therapy. Together with its ease of fabrication, high biocompatibility, high drug loading efficiency, and high release sustainability, CPS shows high potential to be developed into an intelligent solid-state device for wound treatment in the future.

A promising drug delivery candidate (CS-g-PMDA-CYS-fused gold nanoparticles) for inhibition of multidrug-resistant uropathogenic Serratia marcescens

Antibiotic resistance amongst microbial pathogens is a mounting serious issue in researchers and physicians. Various alternatives to overcome the multidrug-resistant bacterial infections are under search, and biofilm growth inhibition is one of them. In this investigation, a polymeric drug delivery system loaded with multi-serratial drugs to improve the delivery of drugs against urinary tract infection causative Serratia marcescens. The chitosan grafted pyromellitic dianhydride - cysteine (CS-g-PMDA-CYS) was conjugated with AuNPs by using the -SH group of CYS and RF (rifampicin) and INH (isoniazid) were loaded in AuNPs-fused CS-g-PMDA-CYS system. Several physicochemical techniques characterized this fabricated AuNPs/RF/INH/CS-g-PMDA-CYS system. The successful encapsulation of RF and INH in AuNPs-fused CS-g-PMDA-CYS polymer had confirmed, and it observed the loading capacity for RF and INH was 9.02% and 13.12%, respectively. The in vitro drug discharge pattern was perceived high in pH 5.5 compared with pH 7.4. The AuNPs/RF/INH/CS-g-PMDA-CYS escalates 74% of Caenorhabditis elegans survival during Serratia marcescens infection by aiming biofilm development and virulence in S. marcescens. Author postulate that the fabricated system is a promising drug carrier and delivery system for inhibition of multidrug-resistant bacterias like S. marcescens.

Bio-inspired lubricant drug delivery particles for the treatment of osteoarthritis

Osteoarthritis is a chronic and irreversible degenerative disease that often occurs in middle-aged and elderly people. Although many clinical therapeutics like intra-articular drug injection have been widely used for treating osteoarthritis, there are still some shortcomings that need to be overcome such as frequent injection, inflammatory response, and potential overdose. Inspired by the natural biocompatible lubricant substances, hyaluronic acid (HA), a novel bio-inspired lubricant drug delivery microcarrier with pathological-state responsive switches, was developed for osteoarthritis treatment. In this system, a temperature-responsive hydrogel was used to form an inverse opal-structured microsphere scaffold to increase the drug loading efficiency, while HA was employed as a vehicle to encapsulate drugs. Due to the properties of the scaffold, the loaded lubricant and encapsulated drugs can be released when temperature rises in the joint cavity during exercise or osteoarthritis. In contrast, the delivery system will be locked and the drug release process will stop when the arthritis lessens or exercise is stopped. Thus, the designed microcarrier is endowed with the ability of intelligently releasing drugs and lubricants for curing osteoarthritis, demonstrating its great potential in biomedical applications.

Ionically Crosslinked Complex Gels Loaded with Oleic Acid-Containing Vesicles for Transdermal Drug Delivery

Skin is an attractive site for drug administration partly because of its easy accessibility and favorable properties (e.g., less invasiveness and high patient compliance) over some other common routes of administration. Despite this, the efficiency in transdermal drug delivery has been largely limited by poor skin permeation. To address this problem, this study reports the generation of oleic acid-containing vesicles, which can enhance the drug delivery efficiency while showing good stability and limited skin disruption. Upon being loaded into a complex gel, along with the incorporation of the polymer blending technique, a delivery system exhibiting tunable transdermal flux of 2,3,5,4'-tetrahydroxystilbene 2-O-β-D-glucoside is reported. Taking the good biocompatibility and tunable delivery performance into account, our system warrants further development and optimization for future applications in the treatment of skin diseases.

Burgeoning Polymer Nano Blends for Improved Controlled Drug Release: A Review

With continual rapid developments in the biomedical field and understanding of the important mechanisms and pharmacokinetics of biological molecules, controlled drug delivery systems (CDDSs) have been at the forefront over conventional drug delivery systems. Over the past several years, scientists have placed boundless energy and time into exploiting a wide variety of excipients, particularly diverse polymers, both natural and synthetic. More recently, the development of nano polymer blends has achieved noteworthy attention due to their amazing properties, such as biocompatibility, biodegradability and more importantly, their pivotal role in controlled and sustained drug release in vitro and in vivo. These compounds come with a number of effective benefits for improving problems of targeted or controlled drug and gene delivery systems; thus, they have been extensively used in medical and pharmaceutical applications. Additionally, they are quite attractive for wound dressings, textiles, tissue engineering, and biomedical prostheses. In this sense, some important and workable natural polymers (namely, chitosan (CS), starch and cellulose) and some applicable synthetic ones (such as poly-lactic-co-glycolic acid (PLGA), poly(lactic acid) (PLA) and poly-glycolic acid (PGA)) have played an indispensable role over the last two decades for their therapeutic effects owing to their appealing and renewable biological properties. According to our data, this is the first review article highlighting CDDSs composed of diverse natural and synthetic nano biopolymers, blended for biological purposes, mostly over the past five years; other reviews have just briefly mentioned the use of such blended polymers. We, additionally, try to make comparisons between various nano blending systems in terms of improved sustained and controlled drug release behavior.

Antibacterial and angiogenic chitosan microneedle array patch for promoting wound healing

A patch with the capability of avoiding wound infection and promoting tissue remolding is of great value for wound healing. In this paper, we develop a biomass chitosan microneedle array (CSMNA) patch integrated with smart responsive drug delivery for promoting wound healing. Chitosan possesses many outstanding features such as the natural antibacterial property and has been widely utilized for wound healing. Besides, the microstructure of microneedles enables the effective delivery of loaded drugs into the target area and avoids the excessive adhesion between the skin and the patch. Also, vascular endothelial growth factor (VEGF) is encapsulated in the micropores of CSMNA by temperature sensitive hydrogel. Therefore, the smart release of the drugs can be controllably realized via the temperature rising induced by the inflammation response at the site of wounds. It is demonstrated that the biomass CSMNA patch can promote inflammatory inhibition, collagen deposition, angiogenesis, and tissue regeneration during the wound closure. Thus, this versatile CSMNA patch is potentially valuable for wound healing in clinical applications.

Poly(L-Glutamic Acid)-Based Brush Copolymers: Fabrication, Self-assembly, and Evaluation as Efficient Nanocarriers for Cationic Protein Drug Delivery

Protein drugs were considered to be the first choice to treat many human diseases, but their clinical application was usually limited by their short half-life and lack of validated targeted therapy. Here, a series of folate-functionalized poly(ethylene glycol)-b-(poly(2-aminoethyl-L-glutamate)-g-poly(L-glutamic acid))s (FA-PEG-b-(PELG-g-PLGA)s) were designed as tumor-targeted carriers for cationic protein delivery. Compared with traditional copolymers consisting of PEG and linear charged hydrophilic blocks, FA-PEG-b-(PELG-g-PLGA) with brush-like polyelectrolyte segments were beneficial to improving their electrostatic interactions with loading protein molecules, thus increasing drug-loading stability and protecting encapsulated proteins from degradation. The designed polymer brushes could efficiently encapsulate cytochrome C (CytC), a cationic model protein, to form polyion complex (PIC) micelles with an average particle size of approximately 200 nm. An in vitro drug release study showed that the drug-loading stability of the formed PIC micelles was largely improved. The functionalization of the block copolymer carriers with a targeting folate group enhanced the tumor cell growth inhibition and total apoptotic rates induced by CytC. Our results shed light on the unique advantages of brush-like polymer carriers in delivering cationic proteins, and the poly(L-glutamic acid)-based linear-brush diblock copolymers could be applied as a versatile delivery platform for molecular targeting in cancer therapy.

Facile design of autogenous stimuli-responsive chitosan/hyaluronic acid nanoparticles for efficient small molecules to protein delivery

Chitosan is functionalized with oxidative stress-sensitive thioketal entities in a one-pot methodology, and self-assembled into drugs or protein loaded dual stimuli responsive nanoparticles, which kill glioblastoma cells and increase nerve outgrowth.

Multilayered composite-coated ionically crosslinked food-grade hydrogel beads generated from algal alginate for controlled and sustained release of bioactive compounds

Hydrogels have gained interest as sustained-release matrices partly because of their high biocompatibility and ease of preparation. Their wide application has, however, been limited by their poor mechanical strength and their lack of tunability in the performance of bioactive agent delivery. By using the lake substratum as a gel property modifier, in combination with the use of the surface coating approach and the ionic gelation technique, hydrogel beads are generated from algal alginate for controlled and sustained release of bioactive compounds. Both the acute and chronic toxicity of the beads are found to be negligible in 3T3 fibroblasts. The capacity of the beads in retaining the activity of the loaded agent is verified by the negligible change in the action of the loaded compound on foodborne bacteria (viz., Staphylococcus aureus and Escherichia coli). Along with the high flexibility provided by the adopted method in the choice of coating materials, our beads extend the limitations of conventional ionically crosslinked gel systems, and show high potential for applications in functional food development, nutraceutical delivery, and pharmaceutical formulation.

Multilayered composite-coated hydrogel beads are generated from algal alginate as carriers of bioactive compounds. They show high potential for applications in functional food development, nutraceutical delivery, and pharmaceutical formulation.

Engineering an adhesive based on photosensitive polymer hydrogels and silver nanoparticles for wound healing

Adhesives developed possess a good hemostatic effect. Attractively, agents loaded into the adhesives could exert sustained excellent antibacterial properties.

Ionically crosslinked polyelectrolyte nanoparticle formation mechanisms: the significance of mixing

Mixing oppositely charged polyelectrolytes and multivalent counterion solutions at low concentrations leads to the formation of colloidal ionically crosslinked polyelectrolyte particles. Due to the rapid reaction kinetics, the complexation processes and the final product could vary significantly when changing the mixing efficiency, which was often overlooked in previous studies. To investigate the effect of mixing on the polyelectrolyte-based colloid formation, we use chitosan/tripolyphosphate mixtures as a model system and compare the particle formation under flash nano-complexation (FNC, representing rapid and efficient mixing) and conventional dropwise mixing. It turns out that the non-uniform mixing and rapid complex formation during conventional mixing lead to particle formation at a low tripolyphosphate : chitosan ratio, which could be avoided by FNC. When mixing using FNC, the particle formation started at a critical tripolyphosphate : glucosamine ratio, below which only soluble complexes exist, and such a critical ratio is independent of the chitosan molecular weight and charge density. Homogeneous mixing also leads to the formation of a large amount of small primary particles without further aggregation due to the rapid consumption of free crosslinking counterions. Such a strong dependency of ionically crosslinked polyelectrolyte colloid formation on the mixing efficiency was also demonstrated using other polyelectrolytes and counterions. Thus, the mixing efficiency could have a significant impact on the interpretation of the complexation process and the mechanisms and should be carefully discussed when studying ionically crosslinked polyelectrolyte colloids.

Fabrication of Ion-Crosslinking Aminochitosan Nanoparticles for Encapsulation and Slow Release of Curcumin

Curcumin (Cur) has anticancer activities but has poor stability, which can be improved using carrier materials. In this study, chitosan was aminated to increase the number of amino groups on its surface, modified with folic acid (FA), and then made into nanoparticles by ionic crosslinking. Owing to ion interaction, the negatively charged, non-toxic tripolyphosphate (TPP) interacted with the positively charged amino group on the aminated chitosan (AmCS) surface, producing FA-AmCS-TPP nanoparticles, which were then characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectrophotometry (FT-IR), and thermogravimetric analysis (TGA). Their small particle size (175.2 ± 0.99 nm) and good surface positive potential (+42.4 mV) are beneficial for carrying antitumor drugs. We subsequently investigated whether coating of Cur by AmCS allows slow drug release by FA-AmCS-TPP nanoparticles in different pH environments, and estimated the Cur loading efficiency (EE-Cur). Our results showed that the cumulative release rate of Cur at 48 h was 56.2%, and that the EE-Cur reached 94.26 ± 0.91% with nanoparticles composed of 0.10 g AmCS, 10.0 mg FA, 10.0 mg TPP, and 15.0 mg Cur. Additionally, cytotoxicity experiments showed that the Cur/FA-AmCS-TPP nanoparticles had good targeting ability for tumor cells. Therefore, the non-toxic targeted composite nanoparticles had potential as a new antitumor agent that can overcome the limitations of Cur.

New Water-Soluble Oxyamino Chitosans as Biocompatible Vectors for Efficacious Anticancer Therapy via Co-Delivery of Gene and Drug

Among the many nonviral gene delivery vectors, chitosan, being a polysaccharide of natural origin, has gained special importance. In this report, chitosan (CS) has been solubilized in water by preparing its O-carboxymethyl derivative, CS(CH₂COOH), with an optimum degree of carboxymethylation. This has been further derivatized to get the pyridine-substituted product (py)CS(CH₂COOH), where the degree of pyridine substitution (47%) was optimized based on zeta potential measurements. The optimized formulation showed a high gene binding ability, forming nanosized positively charged polyelectrolyte complexes with DNA. These polyplexes were stable to DNase and physiological polyanions such as heparin. They also exhibited minimal toxicity in vitro and showed transfection levels comparable to the commercial standard Lipofectamine 2000 and much higher than polyethylenimine (MW, 25 kDa). Additionally, in this study, a hitherto unknown oxyamine derivative of chitosan has been prepared by phthaloyl protection, tosylation, and Gabriel's phthalimide synthesis. Nearly 40% of the primary alcohols were successfully converted to oxyamino functionality, which was used for forming oxime with the anticancer drug doxorubicin. The pH sensitivity of the oxime ether linkage and stability under biologically relevant conditions were then used to establish the compound as a versatile drug delivery vector. Co-delivery of functional gene (p53) and drug (doxorubicin) was accomplished in vitro and in vivo with the chitosan-pyridine imine vector (py)CS(CH₂COOH) and the newly synthesized doxorubicin oxime ether CS(Dox). Complete tumor regression with no tumor recurrence and appreciable survivability point to the in vivo effectiveness and biocompatibility of the designed composite formulation. Overall, the pH sensitivity of the oxime linkage aiding slow and steady drug release, together with the sustained gene expression by pyridine-tethered carboxymethyl chitosan, allows us to generate a nanobiocomposite with significantly high anticancer therapeutic potential.

Phosphonium Polyelectrolyte Complexes for the Encapsulation and Slow Release of Ionic Cargo

Polyelectrolyte complexation, the combination of anionically and cationically charged polymers through ionic interactions, can be used to form hydrogel networks. These networks can be used to encapsulate and release cargo, but the release of cargo is typically rapid, occurring over a period of hours to a few days and they often exhibit weak, fluid-like mechanical properties. Here we report the preparation and study of polyelectrolyte complexes (PECs) from sodium hyaluronate (HA) and poly[tris(hydroxypropyl)(4-vinylbenzyl)phosphonium chloride], poly[triphenyl(4-vinylbenzyl)phosphonium chloride], poly[tri(n-butyl)(4-vinylbenzyl)phosphonium chloride], or poly[triethyl(4-vinylbenzyl)phosphonium chloride]. The networks were compacted by ultracentrifugation, then their composition, swelling, rheological, and self-healing properties were studied. Their properties depended on the structure of the phosphonium polymer and the salt concentration, but in general, they exhibited predominantly gel-like behavior with relaxation times greater than 40 s and self-healing over 2-18 h. Anionic molecules, including fluorescein, diclofenac, and adenosine-5'-triphosphate, were encapsulated into the PECs with high loading capacities of up to 16 wt %. Fluorescein and diclofenac were slowly released over 60 days, which was attributed to a combination of hydrophobic and ionic interactions with the dense PEC network. The cytotoxicities of the polymers and their corresponding networks with HA to C2C12 mouse myoblast cells was investigated and found to depend on the structure of the polymer and the properties of the network. Overall, this work demonstrates the utility of polyphosphonium-HA networks for the loading and slow release of ionic drugs and that their physical and biological properties can be readily tuned according to the structure of the phosphonium polymer.

Carbohydrate-based nanomaterials for biomedical applications

Carbohydrates are abundant biomolecules, with a strong tendency to form supramolecular networks. A host of carbohydrate-based nanomaterials have been exploited for biomedical applications. These structures are based on simple mono- or disaccharides, as well as on complex, polymeric systems. Chemical modifications serve to tune the shapes and properties of these materials. In particular, carbohydrate-based nanoparticles and nanogels were used for drug delivery, imaging, and tissue engineering applications. Due to the reversible nature of the assembly, often based on a combination of hydrogen bonding and hydrophobic interactions, carbohydrate-based materials are valuable substrates for the creations of responsive systems. Herein, we review the current research on carbohydrate-based nanomaterials, with a particular focus on carbohydrate assembly. We will discuss how these systems are formed and how their properties are tuned. Particular emphasis will be placed on the use of carbohydrates for biomedical applications. This article is categorized under: Nanotechnology Approaches to Biology > Nanoscale Systems in Biology.

Biocompatible chitosan-pectin polyelectrolyte complex for simultaneous electrochemical determination of metronidazole and metribuzin

Development of novel biocompatible sensor material suitable for modest, cost-effective, and rapid practical application is a demanding research interest in the field of electroanalytical chemistry. In this context, for the first time, we utilized biocompatible chitosan-pectin biopolyelectrolyte (CS-PC BPE) complex for the simultaneous electroreduction of an important antibiotic drug (metronidazole-MNZ) and herbicide (metribuzin-MTZ). This sensor reveals an attractive welfares such as simplicity, biocompatibility, and low production cost. Under optimized experimental conditions, the electroanalytical investigation confirmed that CS-PC BPE modified glassy carbon electrode (CS-PC BPE/GCE) was found to sense MNZ and MTZ in the nanomolar range. Moreover, as-prepared CS-PC BPE/GCE exhibited prominent selectivity, stability, and reproducibility. Additionally, the possible MNZ and MTZ sensing mechanism of CS-PC BPE/GCE have been discussed in detail. Lastly, real sample analysis was also carried out and revealed from several investigations that the CS-PC BPE/GCE is a good electrochemical sensor system for the detection of targeted analytes.

A responsive porous hydrogel particle-based delivery system for oncotherapy

Liver cancer is one of the malignant cancers that seriously threatens human health. Although some common treatments including chemotherapy have been applied in oncotherapy, there are often serious shortcomings such as frequent and uncontrollable drug infusion. To overcome these limitations, here, we introduced responsive porous hydrogel microparticles loaded with 5-fluorouracil and metformin for oncotherapy. Because of the interconnected porous structures, various forms of active molecules could be loaded into the particles. In addition, the relatively higher temperature of the tumor site and the temperature-responsive shape transition of pNIPAM hydrogel enabled controllable drug release. The porous pNIPAM particles not only exhibited large loading efficiency and sustained release for the 5-fluorouracil and metformin co-delivery, but also protected drugs from being resolved. Thus, it can be anticipated that the porous microparticles will have great potential in oncotherapy.

Investigation of the blends of chitosan and tragacanth as potential drug carriers for the delivery of ibuprofen in the intestine

This study provides a new potential hydrogel for the intestinal delivery of ibuprofen.