Universal Fluorescence Biosensor Platform Based on Graphene Quantum Dots and Pyrene-Functionalized Molecular Beacons for Detection of MicroRNAs

Binding of Urinary Human Serum Albumin Fragments to Albumin-Selective Aptamer-Bound Graphene Quantum Dots: Simulation Studies

Microalbuminuria is a key indicator of chronic kidney disease (CKD), resulting from the leakage of albumin into urine. The accuracy of microalbuminuria measurement depends on urine freshness as improper storage and slow processing can lead to protease digestion of albumin. Recently, graphene-based aptasensors have been shown to detect albumin in aged urine samples, suggesting that albumin fragments can still be recognized by these sensors. To date, nine urinary albumin fragments (F1-F9) have been reported. Meanwhile, the graphene quantum dot (GQD) has emerged as a promising material due to its noncytotoxicity, high biocompatibility, and intrinsic fluorescence properties. Its comparable size to aptamers makes it particularly attractive for albumin detection. In this study, molecular dynamics (MD) simulations were performed to reveal the binding modes of urinary albumin fragments (F1-F9) to the aptamer-bound GQD (GQDA) complex. The study compares the binding behavior of nonaggregated (N_AG) and preaggregated (AG) albumin fragments with GQDA. The results demonstrate that the spontaneous clustering of GQDA and albumin fragments occurs in all cases. However, aggregated fragments exhibit reduced aptamer accessibility due to geometric confinement and structural rigidity. Lysine-rich regions were found to play a crucial role in fragment-aptamer interactions, with F1 and F8 displaying the highest number of aptamer contacts. Notably, F8, the most stable fragment, showed the strongest interactions with aptamers, highlighting its potential as a urinary biomarker for CKD detection. The findings from this study provide valuable molecular insights into the interactions between urinary albumin fragments and GQDA, paving the way for the development of highly selective and sensitive CKD diagnostic platforms.

Recent Progress of Fluorescent Carbon Dots and Graphene Quantum Dots for Biosensors: Synthesis of Solution Methods and their Medical Applications

In the fields of health and biology, fluorescent nanomaterials have emerged as highly potential and very useful candidates for use in biosensor applications. These typical highly powerful nanomaterials are carbon dots (CDs) and graphene quantum dots (GQDs) among many other metallic nanomaterials. In the context of medical biosensors, this review article investigates the techniques of synthesis, and many uses of these nanomaterials, the obstacles that they face, and the potential for their future. We cover the significance of fluorescent nanomaterials, their use in the medical field, as well as the several techniques of synthesis for CDs and GQDs, including ultrasonication, hydrothermal, electrochemical method, surface modification, and solvothermal. In addition, we also discuss their biomedical applications, which include biomolecule detection, disease diagnosis and examine the obstacles and prospective possibilities for development of ultra-bright, ultra-sensitive, and selective biosensors for use in in-vivo research.Fluorescent carbon dots and graphene quantum dots is synthesized by using several types of raw material and methods. These Carbon dots and graphene quantum dots are used in the medical field includes detection of biomaterials, detection of cancer, virus and mutation in DNA.

Engineering Gizmos for Short Cancer Genetic Fragments Discrimination

Currently, mankind is fiercely struggling with cancer. Recently, we have been winning the battle against cancer through precision medicine and accompanying diagnostic methods, and we are raising many hopes with blockbuster drugs. It would be even better if we could read the cancer nucleotide sequence, identify them in advance, and suggest treatments simultaneously. However, this may be an impossible dream because it takes a lot of time and effort to diagnose and ensure all the long gene sequences of cancer at once. Thus, victory will be even closer if a rapid and accurate diagnosis of the cancer-specific gene biomarkers that will soon be imprinted can be made. With the advent of nanotechnology, a new short cancer diagnostic toolkit has been proposed to achieve the goal. This review presents a small diagnostic device that detects certain cancers' genetic fragments (simply 'Gizmo'). The development of numerous diagnostic methods has focused on (1) directly detecting pre-selectively targeted genes using novel diagnostic systems, and (2) indirectly detecting substantial improvements in diagnostic sensitivity only through detection signal amplification without existing gene amplification steps. Our fight against cancer is not a dream, but the result of success, and it is assumed that victory will accelerate as soon as possible.

Fabricating Graphene-Based Molecular Electronics via Surface Modification by Physisorption and Chemisorption

Graphene, a one-atom-thick sp2-hybridized carbon sheet, has enormous potential for fabricating flexible transparent electronics due to its unique electronic and mechanical properties. However, the intrinsic lack of a band gap, the low reactivity, and the poor solubility of pristine graphene have largely hindered wide-ranging applications so far. One of the most attractive ways to resolve these issues is to modify the graphene surface through molecular physisorption or chemisorption. In this review, we summarize the recent progress in fabricating graphene-based molecular electronics through manipulating small functional molecules on the graphene surface towards chemical reactivity adjustment, molecular doping, and band gap opening via non-covalent and covalent interactions, and draw attention to challenges and opportunities. We also suggest future research directions for graphene-based molecular electronics.

How a mixture of microRNA-29a (miR-29a) and microRNA-144 (miR-144) cancer biomarkers interacts with a graphene quantum dot

MicroRNAs (miRNAs) which are small non-coding RNAs have been reported to be potential cancer biomarker. However, it is difficult to extract such short RNA from a sample matrix. New effective strategies are required. Recently, graphene quantum dots (GQDs) have been used to detect nucleotides in many biosensor platforms, but their applications for miRNA extraction remain limited. GQD was reported to be able to collect short miRNA, but its performance to collect miRNAs with different structure remains unknown. Thus, in this work, the capability of GQD to interact with two different miRNAs is investigated. A mixture of hairpin-like miR-29a and circular miR-144 molecules are used as a representative of two miRNA morphologies. Two systems (a miRNA mixture, comprising 4 of miR-29a and 4 of miR-144, with (miR_GQD) and without GQD (miR)) were studied in comparison. MiRNAs in a mixture (miR) can aggregate, but no permanent miRNA assembly is captured. In contrast, the presence of GQD can rapidly and spontaneously activate the permanent miRNA/GQD clustering. This finding highlights the ability of GQD to be a miRNA collector. Interestingly, all GQD-bound miRNAs do not unfold. This allows the easy accessibility for probes. Also, nano-sized GQD seems to prefer hairpin miR-29a. The free 5' terminus of miR-29a acts as the sticky end to adhere on GQD. This work highlights the importance of RNA secondary structure on GQD/miRNA aggregation capability. An insight obtained here will be useful for further design of miRNA isolation strategies.

A gold nanoparticle-enhanced dCas9-mediated fluorescence resonance energy transfer for nucleic acid detection

Clustered regularly interspaced short palindromic repeats (CRISPR)-associated Cas proteins coupled with pre-amplification have shown great potential in molecular diagnoses. However, the current CRISPR-based methods require additional reporters and time-consuming process. Herein, a gold nanoparticle (AuNP)-enhanced CRISPR/dCas9-mediated fluorescence resonance energy transfer (FRET) termed Au-CFRET platform was proposed for rapid, sensitive, and specific detection of nucleic acid for the first time. In the Au-CFRET sensing platform, AuNP was functionalized with dCas9 and used as nanoprobe. Target DNA was amplified with FAM-labeled primers and then precisely bound with AuNP-dCas9. The formed complex rendered the distance between AuNP acceptor and FAM donor to be short enough for the occurrence of FRET, thus resulting in fluorescence quenching. Moreover, AuNPs were demonstrated to enhance binding efficiency of dCas9 to target DNA in Au-CFRET system. The key factors regarding the FRET efficiency were analyzed and characterized in detail, including the length of donor/acceptor and the size of AuNPs. Under the optimal conditions, Au-CFRET could determinate CaMV35S promoter of genetically modified rice as low as 21 copies μL-1. Moreover, Au-CFRET sensing system coupled with one-step extraction and recombinase polymerase amplification can identify the genuine plant seeds within 30 min from sampling to results at room/body temperature without expensive equipment or technical expertise, and requires no additional exogenous reporters. Therefore, the proposed sensing platform significantly simplified the system and shortened the assay time for nucleic acid diagnoses.

Aggregation of Apo/Glycated Human Serum Albumins and Aptamer-Saturated Graphene Quantum Dot: A Simulation Study

Human serum albumin (HSA) is a protein carrier that transports a wide range of drugs and nutrients. The amount of glycated HSA (GHSA) is used as a diabetes biomarker. To quantify the GHSA amount, the fluorescent graphene-based aptasensor has been a successful method. In aptasensors, the key mechanism is the adsorption/desorption of albumin from the aptamer-graphene complex. Recently, the graphene quantum dot (GQD) has been reported to be an aptamer sorbent. Due to its comparable size to aptamers, it is attractive enough to explore the possibility of GQD as a part of an albumin aptasensor. Therefore, molecular dynamics (MD) simulations were performed here to reveal the binding mechanism of albumin to an aptamer-GQD complex in molecular detail. GQD saturated by albumin-selective aptamers (GQDA) is studied, and GHSA and HSA are studied in comparison to understand the effect of glycation. Fast and spontaneous albumin-GQDA binding was observed. While no specific GQDA-binding site on both albumins was found, the residues used for binding were confined to domains I and III for HSA and domains II and III for GHSA. Albumins were found to bind preferably to aptamers rather than to GQD. Lysines and arginines were the main contributors to binding. We also found the dissociation of GLC from all GHSA trajectories, which highlights the role of GQDA in interfering with the ligand binding affinity in Sudlow site I. The binding of GQDA appears to impair albumin structure and function. The insights obtained here will be useful for the future design of diabetes aptasensors.

Graphene quantum dots for biosensing and bioimaging

Graphene Quantum Dots (GQDs) are low dimensional carbon based materials with interesting physical, chemical and biological properties that enable their applications in numerous fields. GQDs possess unique electronic structures that impart special functional attributes such as tunable optical/electrical properties in addition to heteroatom-doping and more importantly a propensity for surface functionalization for applications in biosensing and bioimaging. Herein, we review the recent advancements in the top-down and bottom-up approaches for the synthesis of GQDs. Following this, we present a detailed review of the various surface properties of GQDs and their applications in bioimaging and biosensing. GQDs have been used for fluorescence imaging for visualizing tumours and monitoring the therapeutic responses in addition to magnetic resonance imaging applications. Similarly, the photoluminescence based biosensing applications of GQDs for the detection of hydrogen peroxide, micro RNA, DNA, horse radish peroxidase, heavy metal ions, negatively charged ions, cardiac troponin, etc. are discussed in this review. Finally, we conclude the review with a discussion on future prospects.

Binding of Apo and Glycated Human Serum Albumins to an Albumin-Selective Aptamer-Bound Graphene Quantum Dot Complex

Diabetes mellitus is a chronic metabolic disease involving continued elevated blood glucose levels. It is a leading cause of mortality and reduced life expectancy. Glycated human serum albumin (GHSA) has been reported to be a potential diabetes biomarker. A nanomaterial-based aptasensor is one of the effective techniques to detect GHSA. Graphene quantum dots (GQDs) have been widely used in aptasensors as an aptamer fluorescence quencher due to their high biocompatibility and sensitivity. GHSA-selective fluorescent aptamers are first quenched upon binding to GQDs. The presence of albumin targets results in the release of aptamers to albumin and consequently fluorescence recovery. To date, the molecular details on how GQDs interact with GHSA-selective aptamers and albumin remain limited, especially the interactions of an aptamer-bound GQD (GQDA) with an albumin. Thus, in this work, molecular dynamics simulations were used to reveal the binding mechanism of human serum albumin (HSA) and GHSA to GQDA. The results show the rapid and spontaneous assembly of albumin and GQDA. Multiple sites of albumins can accommodate both aptamers and GQDs. This suggests that the saturation of aptamers on GQDs is required for accurate albumin detection. Guanine and thymine are keys for albumin-aptamer clustering. GHSA gets denatured more than HSA. The presence of bound GQDA on GHSA widens the entrance of drug site I, resulting in the release of open-chain glucose. The insight obtained here will serve as a base for accurate GQD-based aptasensor design and development.

An overview of biochemical technologies for the cancer biomarker miR-21 detection

In recent years, the incidence of cancer has continuously increased, in which various miRNAs have been proposed as biomarkers for the early screening of cancer patients. As a consequence, the development of accurate methods for miRNA quantification has become a major research challenge worldwide. As one of the first discovered oncogenic miRNAs, microRNA-21 (miR-21) has been highlighted for its critical role in cancers. This review describes the main techniques currently available for miR-21 detection, compares the differences of the methods and the amplification strategies, and provides an overview of the state of knowledge in the field.

Innovations in the synthesis of graphene nanostructures for bio and gas sensors

Sensors play a significant role in modern technologies and devices used in industries, hospitals, healthcare, nanotechnology, astronomy, and meteorology. Sensors based upon nanostructured materials have gained special attention due to their high sensitivity, precision accuracy, and feasibility. This review discusses the fabrication of graphene-based biosensors and gas sensors, which have highly efficient performance. Significant developments in the synthesis routes to fabricate graphene-based materials with improved structural and surface properties have boosted their utilization in sensing applications. The higher surface area, better conductivity, tunable structure, and atom-thick morphology of these hybrid materials have made them highly desirable for the fabrication of flexible and stable sensors. Many publications have reported various modification approaches to improve the selectivity of these materials. In the current work, a compact and informative review focusing on the most recent developments in graphene-based biosensors and gas sensors has been designed and delivered. The research community has provided a complete critical analysis of the most robust case studies from the latest fabrication routes to the most complex challenges. Some significant ideas and solutions have been proposed to overcome the limitations regarding the field of biosensors and hazardous gas sensors.

Two-dimensional nanostructures based '-onics' and '-omics' in personalized medicine

With the maturing techniques for advanced synthesis and engineering of two-dimensional (2D) materials, its nanocomposites, hybrid nanostructures, alloys, and heterostructures, researchers have been able to create materials with improved as well as novel functionalities. One of the major applications that have been taking advantage of these materials with unique properties is biomedical devices, which currently prefer to be decentralized and highly personalized with good precision. The unique properties of these materials, such as high surface to volume ratio, a large number of active sites, tunable bandgap, nonlinear optical properties, and high carrier mobility is a boon to 'onics' (photonics/electronics) and 'omics' (genomics/exposomics) technologies for developing personalized, low-cost, feasible, decentralized, and highly accurate medical devices. This review aims to unfold the developments in point-of-care technology, the application of 'onics' and 'omics' in point-of-care medicine, and the part of two-dimensional materials. We have discussed the prospects of photonic devices based on 2D materials in personalized medicine and briefly discussed electronic devices for the same.

Bioanalytical Applications of Graphene Quantum Dots for Circulating Cell-Free Nucleic Acids: A Review

Graphene quantum dots (GQDs) are carbonaceous nanodots that are natural crystalline semiconductors and range from 1 to 20 nm. The broad range of applications for GQDs is based on their unique physical and chemical properties. Compared to inorganic quantum dots, GQDs possess numerous advantages, including formidable biocompatibility, low intrinsic toxicity, excellent dispensability, hydrophilicity, and surface grating, thus making them promising materials for nanophotonic applications. Owing to their unique photonic compliant properties, such as superb solubility, robust chemical inertness, large specific surface area, superabundant surface conjugation sites, superior photostability, resistance to photobleaching, and nonblinking, GQDs have emerged as a novel class of probes for the detection of biomolecules and study of their molecular interactions. Here, we present a brief overview of GQDs, their advantages over quantum dots (QDs), various synthesis procedures, and different surface conjugation chemistries for detecting cell-free circulating nucleic acids (CNAs). With the prominent rise of liquid biopsy-based approaches for real-time detection of CNAs, GQDs-based strategies might be a step toward early diagnosis, prognosis, treatment monitoring, and outcome prediction of various non-communicable diseases, including cancers.

The aggregation of multiple miR-29a cancer biomarkers induced by graphene quantum dots: Molecular dynamics simulations

MicroRNAs (miRNAs) are small non-coding RNAs that play a role in regulating gene expression. MiRNAs are focused on as potential cancer biomarkers due to their involvement in the cancer development. New effective techniques for extracting miRNA from a biological matrix is important. Recently, graphene quantum dots (GQDs) have been used to detect DNA/RNA in many sensor platforms, but the application in miRNA extraction remains limited. To extract miRNAs, the miRNA adsorption and desorption on GQD are the key. Thus, in this work, the adsorption mechanism of excess miRNA on GQD in solution is revealed using Molecular dynamics simulations. The miRNA assemblies on one and two GQDs were studied to explore the possibility of using GQD for miRNA extraction. The folded miR-29a molecule, one of key cancer biomarkers, is used as an miRNA model. Three systems with one (6miR) and two GQDs (with parallel (6miR_2GP) and sandwich (6miR_2GS) organisations) in six-miR-29a solution were set. The data show excess miR-29a can reduce the miR-29a-GQD binding efficiency. The opening of intrabase pairing of GQD-absorbed miR-29a facilitates the interbase coupling resulting in the self-aggregation of miR-29a. The GQD organisation also affects the miR-29a adsorption ability. The additional GQDs result in the tighter miR-29a adsorption which can retard the miR-29a desorption. The proper GQD concentration is thus important to successfully collect all miR-29a and accommodate the easy miR-29a dissociation. Our results can be useful for a design of DNA probe and choosing decent nanosized GRA concentration for experimental setups.

Detection of Pancreatic Cancer miRNA with Biocompatible Nitrogen-Doped Graphene Quantum Dots

Early-stage pancreatic cancer remains challenging to detect, leading to a poor five-year patient survival rate. This obstacle necessitates the development of early detection approaches based on novel technologies and materials. In this work, the presence of a specific pancreatic cancer-derived miRNA (pre-miR-132) is detected using the fluorescence properties of biocompatible nitrogen-doped graphene quantum dots (NGQDs) synthesized using a bottom-up approach from a single glucosamine precursor. The sensor platform is comprised of slightly positively charged (1.14 ± 0.36 mV) NGQDs bound via π-π stacking and/or electrostatic interactions to the negatively charged (-22.4 ± 6.00 mV) bait ssDNA; together, they form a complex with a 20 nm average size. The NGQDs' fluorescence distinguishes specific single-stranded DNA sequences due to bait-target complementarity, discriminating them from random control sequences with sensitivity in the micromolar range. Furthermore, this targetability can also detect the stem and loop portions of pre-miR-132, adding to the practicality of the biosensor. This non-invasive approach allows cancer-specific miRNA detection to facilitate early diagnosis of various forms of cancer.

A waste-free entropy-driven DNA nanomachine for smartly designed photoelectrochemical biosensing of MicroRNA-155

DNA nanotechnology has been booming in many fields such as biosensors, logic gates, and material science. Typically, as a kind of powerful isothermal and enzyme-free DNA amplifier in biosensors, entropy-driven DNA nanomachines are superior to hairpin-based ones in speed, specificity, stability, and simplicity. However, the atomic economy of non-covalent molecular reactions in these machines is not high, and DNAs waste is typically generated during operation. Herein, in order to further save costs and improve the performance, we report a novel design for a smart photoelectrochemical (PEC) biosensor of microRNA-155 by engineering waste-free entropy-driven DNA amplifiers conjugated to superparamagnetic Fe₃O₄@SiO₂ particles. This elegant design efficiently avoids leaving redundant DNA strands and waste complex in the amplification system, and all the displaced DNA strands can be regenerated into double-stranded structures, making the reaction irreversible. Thanks to superparamagnetic Fe₃O₄@SiO₂ particles, this strategy is achieved by effectively enriching, extracting, and cleaning target analogs to prevent co-existing species from remaining on the modified electrode surface, enabling a highly specific and sensitive PEC biosensor. This innovative study will be a new perspective on microRNAs detection in complex biological systems, paving the way for the design of waste-free DNA molecular machines and promoting the development of DNA nanotechnology.

Long-term continuous monitoring of microRNA in living cells using modified gold nanoprobe

Long-term and continuous monitoring of the microRNA (miRNA) expression in living cells is essential in biomedical research, but it is currently limited by fast consumption and easy digestion of probes in the intracellular environment. Herein, we report polydopamine-modified gold nanoparticles (AuNPs@PDA) as protective and efficient nanocarriers for DNA hairpin probes (hpDNA), achieving long-term monitoring (48 h) of the miRNA (let-7a) levels in living cells after drug treatments. This method enabled excellent sensitivity and high selectivity toward let-7a with a limit of detection of 0.51 nM (n = 3) and a linear range from 1 to 100 nM. More importantly, AuNPs@PDA can not only efficiently improve the loading of hpDNA on each nanoparticle, but also effectively protect hpDNA from hydrolysis in the cell microenvironment, finally realizing the continuous monitoring of let-7a in living cells for 48 h. This simple method would be of great significance for drug screening and precision medicine.

Graphene quantum dots: synthesis, properties, and applications to the development of optical and electrochemical sensors for chemical sensing

GQDs exhibits exceptional electrochemical activity owing to their active edge sites that make them very attractive for biosensing applications. However, their use in the design of new biosensing devices for application to the detection and quantification of toxins, pathogens, and clinical biomarkers has so far not investigated in detail. In this regard, herein we provide a detailed review on various methodologies employed for the synthesis of GQDs, including bottom-up and top-down approaches, with a special focus on their applications in biosensing via fluorescence, photoluminescence, chemiluminescence, electrochemiluminescence, fluorescence resonance energy transfer, and electrochemical techniques. We believe that this review will shed light on the critical issues and widen the applications of GQDs for the design of biosensors with improved analytical response for future applications. HIGHLIGHTS: • Properties of GQDs play a critical role in biosensing applications. • Synthesis of GQDs using top-down and bottom-up approaches is discussed comprehensively. • Overview of advancements in GQD-based sensors over the last decade. • Methods for the design of selective and sensitive GQD-based sensors. • Challenges and opportunities for future GQD-based sensors.

Ultrasensitive fluorescence detection of microRNA through DNA-induced assembly of carbon dots on gold nanoparticles with no signal amplification strategy

An ultrasensitive fluorescence assay strategy on the basis of carbon dots (CDs) and cDNA-modified gold nanoparticles (AuNP-cDNA) was developed for the determination of microRNA-21 (miRNA-21) via internal filtering effect (IFE). Positively charged CDs (PEI-CDs), the fluorophores in IFE, were synthesized via a hydrothermal method using polyethyleneimine (PEI) as surface ligand. The maximum emission wavelength is located at 500 nm under the excitation of 410 nm. AuNPs, the absorbers, were modified with single-stranded DNA (cDNA), which is completely complementary to miRNA-21. The fluorescence of PEI-CDs is quenched due to the assembly of PEI-CDs and AuNPs-cDNA. In the presence of miRNA-21, the hybridization between miRNA-21 and cDNA causes the release of PEI-CDs and the recovery of fluorescence intensity.The fluorescence recovery degree is linearly correlated with the logarithm of miRNA-21 concentration in the range of 1-1000 fM. This method can be applied to determine miRNA-21 in real serum samples, and the detection results are in well agreement with those of qRT-PCR. The determination of miRNA-21 spiked into diluted human serum samples displays satisfactory recovery within the range 88.44-112.7%, which confirmed the reliability for miRNAs detection in real samples.

Engineered G-Quadruplex-Embedded Self-Quenching Probes Regulate Single Probe-Based Multiplex Isothermal Amplification to Light Road Lamp Probes for Sensitized Determination of microRNAs

Design of oligonucleotide probe-based isothermal amplification with the ability to identify miRNA biomarkers is crucial for molecular diagnostics. In this work, we engineered a miRNA-21-responsive G-quadruplex-embedded self-quenching probe (GE-SQP) that can regulate single probe-based multiplex amplifications. The free GE-SQP is tightly locked in a quenching state with no active G-quadruplexes. Introduction of target miRNA to hybridize with GE-SQP would induce a multiplex isothermal amplification to significantly build a lot of one-bulb-contained road lamp probe (OC-RLP) and two-bulb-contained road lamp probe (TC-RLP) using G-quadruplex as the lamp bulb. When lightened by thioflavin T (ThT), beams of fluorescence were emitted to show the presented miRNA-21. Specially, the whole amplification is only a one probe-involved one-step reaction without any wasted species. The mix-to-detection and all-in amplification behavior allows the sensing system a maximally maintained operation simplicity and high assay performance. In such a way, the detection range of miRNA-21 is from 1 fM to 1 nM with a limit of detection of 0.86 fM. The practicability was demonstrated by determining miRNA-21 from serum samples with acceptable results. We expect that this method can open a new avenue for exploring advanced biosensors with improved analytical performances.

Graphene for Antimicrobial and Coating Application

Graphene is a versatile compound with several outstanding properties, providing a combination of impressive surface area, high strength, thermal and electrical properties, with a wide array of functionalization possibilities. This review aims to present an introduction of graphene and presents a comprehensive up-to-date review of graphene as an antimicrobial and coating application in medicine and dentistry. Available articles on graphene for biomedical applications were reviewed from January 1957 to August 2020) using MEDLINE/PubMed, Web of Science, and ScienceDirect. The selected articles were included in this study. Extensive research on graphene in several fields exists. However, the available literature on graphene-based coatings in dentistry and medical implant technology is limited. Graphene exhibits high biocompatibility, corrosion prevention, antimicrobial properties to prevent the colonization of bacteria. Graphene coatings enhance adhesion of cells, osteogenic differentiation, and promote antibacterial activity to parts of titanium unaffected by the thermal treatment. Furthermore, the graphene layer can improve the surface properties of implants which can be used for biomedical applications. Hence, graphene and its derivatives may hold the key for the next revolution in dental and medical technology.

Synthesis, Applications, and Prospects of Graphene Quantum Dots: A Comprehensive Review

Graphene quantum dot (GQD) is one of the youngest superstars of the carbon family. Since its emergence in 2008, GQD has attracted a great deal of attention due to its unique optoelectrical properties. Non-zero bandgap, the ability to accommodate functional groups and dopants, excellent dispersibility, highly tunable properties, and biocompatibility are among the most important characteristics of GQDs. To date, GQDs have displayed significant momentum in numerous fields such as energy devices, catalysis, sensing, photodynamic and photothermal therapy, drug delivery, and bioimaging. As this field is rapidly evolving, there is a strong need to identify the emerging challenges of GQDs in recent advances, mainly because some novel applications and numerous innovations on the ease of synthesis of GQDs are not systematically reviewed in earlier studies. This feature article provides a comparative and balanced discussion of recent advances in synthesis, properties, and applications of GQDs. Besides, current challenges and future prospects of these emerging carbon-based nanomaterials are also highlighted. The outlook provided in this review points out that the future of GQD research is boundless, particularly if upcoming studies focus on the ease of purification and eco-friendly synthesis along with improving the photoluminescence quantum yield and production yield of GQDs.

What Happens When a Complementary DNA Meets miR-29a Cancer Biomarker in Complex with a Graphene Quantum Dot

MicroRNAs (miRNAs), short single-stranded noncoding RNA molecules, serve as potential cancer biomarkers due to their involvement in cancer development. One of the strategies to extract miRNAs is to perform the miRNA adsorption on nanomaterials and dissociation by a complementary DNA strand (DNA probe). Recently, graphene quantum dots (GQDs) were found to show a good ability to absorb miRNAs. Thus, in this work, the mechanism of the GQD-adhered miRNA capture by its complementary DNA is revealed using molecular dynamics simulations. miR-29a, a potential cancer biomarker, is used as a miRNA model. Three systems containing one and four chains of miR-29a in addition to one and four complementary DNA probes (1R1D, 1R4D, and 4R4D) were studied. GQDs are the prime targets of a DNA attack. The full coverage of GQDs is required to protect the adsorption of DNA probes on the GQD face. The nucleobase-backbone interactions are the main contributors to miR-DNA interactions in this work. The interbase paring becomes small because most nucleobases of miR-29a and their probe are stacked to maintain their secondary structures, and some are absorbed on the GQD surface. Apparently, weakening of the nucleobase-GQD π-π stacking and the intrabase-pairing strength is needed for extracting miR-29a by a probe. Although no GQD-absorbed miR-29a desorption is found here, the basic principles obtained can be useful for further utilization of GQDs and their derivatives for miRNA extraction and detection.

Graphene Biodevices for Early Disease Diagnosis Based on Biomarker Detection

The early diagnosis of diseases plays a vital role in healthcare and the extension of human life. Graphene-based biosensors have boosted the early diagnosis of diseases by detecting and monitoring related biomarkers, providing a better understanding of various physiological and pathological processes. They have generated tremendous interest, made significant advances, and offered promising application prospects. In this paper, we discuss the background of graphene and biosensors, including the properties and functionalization of graphene and biosensors. Second, the significant technologies adopted by biosensors are discussed, such as field-effect transistors and electrochemical and optical methods. Subsequently, we highlight biosensors for detecting various biomarkers, including ions, small molecules, macromolecules, viruses, bacteria, and living human cells. Finally, the opportunities and challenges of graphene-based biosensors and related broad research interests are discussed.

Applications of Pristine and Functionalized Carbon Nanotubes, Graphene, and Graphene Nanoribbons in Biomedicine

This review is dedicated to a comprehensive description of the latest achievements in the chemical functionalization routes and applications of carbon nanomaterials (CNMs), such as carbon nanotubes, graphene, and graphene nanoribbons. The review starts from the description of noncovalent and covalent exohedral modification approaches, as well as an endohedral functionalization method. After that, the methods to improve the functionalities of CNMs are highlighted. These methods include the functionalization for improving the hydrophilicity, biocompatibility, blood circulation time and tumor accumulation, and the cellular uptake and selectivity. The main part of this review includes the description of the applications of functionalized CNMs in bioimaging, drug delivery, and biosensors. Then, the toxicity studies of CNMs are highlighted. Finally, the further directions of the development of the field are presented.

Modeling the Adsorption of the miR-29a Cancer Biomarker on a Graphene Quantum Dot

MicroRNAs (miRNAs) are small noncoding RNA molecules associated with the regulation of gene expression in organisms. MiRNAs are focused on as potential cancer biomarkers due to their involvement in cancer development. New potential techniques for miRNA detection are rapidly developed, while there is a lack of effective extraction approaches, especially for miRNAs. Recently, graphene quantum dots (GQDs) have been involved in many disease biosensor platforms including miRNA detection, but no application in miRNA extraction is studied. To extract miRNAs, miRNA adsorption and desorption on GQDs are the key. Thus, in this work, the adsorption mechanism of miRNA on GQDs in solution is revealed using molecular dynamics simulations. The aim is to explore the possibility of using GQDs for miRNA extraction. The folded miR-29a molecule, one of the key cancer biomarkers, is used as a miRNA model. Two systems with one (1miR) and four (4miR) chains of miR-29a were set. MiR-29a molecules in all systems are simultaneously adsorbed on the GQD surface. Our finding highlights the ability of the GQD in collecting miRNAs in solution. In 1miR, the whole miR-29a chain sits on the GQD face, whereas all miR-29a molecules in 4miR show the "clamping" conformation. No "lying flat" orientation of miR-29a is observed due to the existence of the preserved hairpin region. Interestingly, the 5' end shows tighter binding than the 3' terminus. A design of complementary DNA with the recognition segment involving the sequences close to the 3' end can promote effective miR-29a desorption.

Ratiometric fluorescent detection and imaging of microRNA in living cells with manganese dioxide nanosheet-active DNAzyme

MicroRNAs (miRNAs) play an important role in multiple biological processes and can be used as biomarkers for clinical disease diagnosis, so their detection is of great importance. Here, manganese dioxide (MnO₂) nanosheet acts as carrier to deliver DNAzyme probes into cells through endocytosis, where intracellular glutathione (GSH) reduces the MnO₂ nanosheet to manganese ions (Mn²⁺) and releases the probes. The generated Mn²⁺ can be further used as an effective cofactor to activate the DNAzyme probe, and cleave the DNA strand into two fragments. Then, the miRNA-155 in the cells can hybridize with the cleaved fragment to cause the fluorescence signal change of the probe. The proposed proportional fluorescent method has been applied to the imaging of miRNA-155 in HeLa cells and HepG2 cells with the estimated detection limit (LOD) as 1.6 × 10^-12 M. The new method can provide great help for cancer diagnosis and biological research related to miRNA.

Recent Developments in Carbon Quantum Dots: Properties, Fabrication Techniques, and Bio-Applications

Carbon dots have gained tremendous interest attributable to their unique features. Two approaches are involved in the fabrication of quantum dots (Top-down and Bottom-up). Most of the synthesis methods are usually multistep, required harsh conditions, and costly carbon sources that may have a toxic effect, therefore green synthesis is more preferable. Herein, the current review presents the green synthesis of carbon quantum dots (CQDs) and graphene quantum dots (GQDs) that having a wide range of potential applications in bio-sensing, cellular imaging, and drug delivery. However, some drawbacks and limitations are still unclear. Other biomedical and biotechnological applications are also highlighted.

Label-free and enzyme-free fluorescence detection of microRNA based on sulfydryl-functionalized carbon dots via target-initiated hemin/G-quadruplex-catalyzed oxidation

Carbon dots (CDs)-based biosensors have attracted considerable interest in reliable and sensitive detection of microRNA (miRNA) because of their merits of ultra-small size, excellent biosafety and tunable emission, whereas complicated labeling procedure and expensive bioenzyme associated with current strategies significantly limit their practical application. Herein, we developed a label-free and enzyme-free fluorescence strategy based on strand displaced amplification (SDA) for highly sensitive detection of miRNA using sulfydryl-functionalized CDs (CDs-SH) as probe. CDs-SH displayed excellent response to G-quadruplex DNA against other DNAs based on based on the catalytic oxidation of -SH into -S-S- by hemin/G-quadruplex. Further, CDs-SH were employed to detect miRNA, using miRNA-21 as target model, which triggered the SDA reaction of P1 and P2 to generate hemin/G-quadruplex, subsequently making CDs-SH transform from dot to aggresome along with the quenched fluorescence. Therefore, label-free, enzyme-free, and highly sensitive analysis of miRNA-21 was readily acquired with a limit of detection at 0.03 pM. This proposed biosensor couples the advantages of CDs and label-free/enzyme-free strategy, and thus has a significant potential to be used in early and accurate diagnosis of cancer.

Design of a ratiometric fluorescence sensor based on metal organic frameworks and Ru(bpy)32+-doped silica composites for 17β-Estradiol detection

17β-Estradiol (E2), an important endocrine disrupting compound, could be quantitatively detected by fluorescence resonance energy transfer (FRET) aptasensor, designed in this paper. Metal organic frameworks have large specific surface area and easily modifiable groups, which are helpful for the construction of aptasensor. Specifically, streptavidin was immobilized on the synthesized MIL-53-NH₂ by covalent bonding, and further linked with the biotin modified E2 aptamer (apt) through specific bonding between avidin and biotin to obtain the FRET donor probe (MIL-53-apt). Meanwhile, complementary DNA (cDNA) modified Ru(bpy)₃²⁺-doped silica nanoparticles (RuSiO₂-cDNA) were prepared through covalent bonding. They acted as the FRET acceptor probe, since its absorption spectrum showed large overlap with the emission spectrum of MIL-53-apt. In the presence of E2, aptamer modified donor probes tended to bind with E2, owing to their higher selectivity and affinity. Therefore, the optimal distance between FRET pairs was broken, resulting in the fluorescence emission recovery of donor and the fluorescence emission of acceptor decreased. Under optimal conditions, this proposed aptasensor displayed sensitive detection of E2 ranging from 0.5 to 1000 nM with a detection limit of 0.2 nM. Furthermore, the sensor provides a promising method for rapid and sensitive detection of other small biological molecules.

Graphene Quantum Dot Oxidation Governs Noncovalent Biopolymer Adsorption

Graphene quantum dots (GQDs) are an allotrope of carbon with a planar surface amenable to functionalization and nanoscale dimensions that confer photoluminescence. Collectively, these properties render GQDs an advantageous platform for nanobiotechnology applications, including optical biosensing and delivery. Towards this end, noncovalent functionalization offers a route to reversibly modify and preserve the pristine GQD substrate, however, a clear paradigm has yet to be realized. Herein, we demonstrate the feasibility of noncovalent polymer adsorption to GQD surfaces, with a specific focus on single-stranded DNA (ssDNA). We study how GQD oxidation level affects the propensity for polymer adsorption by synthesizing and characterizing four types of GQD substrates ranging ~60-fold in oxidation level, then investigating noncovalent polymer association to these substrates. Adsorption of ssDNA quenches intrinsic GQD fluorescence by 31.5% for low-oxidation GQDs and enables aqueous dispersion of otherwise insoluble no-oxidation GQDs. ssDNA-GQD complexation is confirmed by atomic force microscopy, by inducing ssDNA desorption, and with molecular dynamics simulations. ssDNA is determined to adsorb strongly to no-oxidation GQDs, weakly to low-oxidation GQDs, and not at all for heavily oxidized GQDs. Finally, we reveal the generality of the adsorption platform and assess how the GQD system is tunable by modifying polymer sequence and type.

Ultrasensitive Fluorescent miRNA Biosensor Based on a "Sandwich" Oligonucleotide Hybridization and Fluorescence Resonance Energy Transfer Process Using an Ln(III)-MOF and Ag Nanoparticles for Early Cancer Diagnosis: Application of Central Composite Design

Herein, a novel, rapid, highly sensitive, and selective fluorescent biosensor is presented, which is designed based on "sandwich-type" hybridization of oligonucleotides and the fluorescence resonance energy transfer (FRET) strategy. It senses and determines the MicroRNA-155 (miRNA-155) expression levels as a cancer biomarker. In this study, a modified La(III)-metal-organic framework(MOF) and silver nanoparticles (Ag NPs) were used as the energy donor-acceptor pairs in fluorescence quenching through the FRET process. La(III)-MOF was synthesized and then modified by glutaraldehyde as a cross-linking agent. The Ag NPs were also prepared, and then, the surface of both was conjugated with different 5'-amino-labeled ssDNA strands (aptamers). These prepared nanoprobes were characterized by various physicochemical techniques such as X-ray diffraction, energy-dispersive X-ray spectrometry, Fourier transform infrared, field emission scanning electron microscopy, UV-vis spectroscopy, elemental mapping, and gel electrophoresis. To optimize the detection conditions, several factors affecting biosensor performance were assessed by one variable-at-a-time and central composite design methods. Under optimum conditions, this "turn-off" fluorescent biosensor could detect and determine as low as 0.04 ppb (ng. mL^-1) or 5.5 fM of the miRNA-155 biomarker. Therefore, this biosensor provides highly promising potential for lung and breast cancer diagnosis.

Interaction of Phenyl-Substituted Diazaperylenium with Cucurbit[n]uril: Complex versus Supramolecular Polymer

A phenyl-substituted diazaperylenediium dication (DAP) was synthesized that shows concentration-dependent aggregation in water. The host-guest complexation of DAP was studied with the macrocyclic host cucurbit[n]uril (n = 7, 8) in water. With CB[7], it forms a 1:2 complex by placing two aryl substituents inside the CB[7]; whereas, with CB[8], a supramolecular polymer is formed. The resulting complex and supramolecular polymer have been characterized by ITC (isothermal titration calorimetry), ESI-MS (electrospray ionization mass spectrometry), 1H NMR (proton nuclear magnetic resonance), 2D NOESY (two-dimensional nuclear Overhauser enhancement spectroscopy), and DOSY (diffusion-ordered spectroscopy) spectra.

A highly sensitive and selective signal-on strategy for microRNA quantification

MicroRNAs (miRNAs) are associated with physiological and pathological processes. They are recognized as biomarkers for diseases diagnosis and treatment evaluation. Herein we propose a simple and cost-effective HPLC method for quantitative assay of target miRNAs with femtomolar sensitivity, single-base discrimination selectivity and low background. The assay is based on an innovative signal-on strategy. In this strategy, polyadenylation of poly(A) polymerase extends an all 'A' sequence at the end of target miRNA, and the substantially increased number of adenine bases are labeled with 2-Chloroacetaldehyde (CAA) to open a signal-on mode and realize a signal amplification. The linearly amplified fluorescence signal is separated from other inference signals and quantified by high performance liquid chromatography with fluorescence detection (HPLC-FD). Combining with affinity magnetic solid phase extraction (MSPE), the method is well suited for analysis of complex biological samples such as serum and cell lysate with nearly zero background fluorescence. Taking miRNA-21 as the model analyte, this absolute quantification method has a limit of detection of 200 fM and a linear calibration curve (R² = 0.999) in the range from 2.00 pM to 1.00 nM. Using locked nucleic acid (LNA) modified probes rather than ssDNA probes, the assay selectivity is improved. Moreover, analysis of bovine serum and cell lysate samples by using the method is demonstrated. Intracellular content of miRNA-21 is found to be 0.0150 amol/cell in MCF-7 cells with an assay repeatability of 4.0% (RSD, n = 3). The present HPLC quantification of miRNA offers an accurate, reliable, and cost-effective means for quantitative assay of miRNAs occurring in biological samples. Also importantly, it eliminates the need for total RNA isolation for the analysis. It may be useful for more effective diagnosis of diseases and therapeutic evaluation.

Applications of Graphene Quantum Dots in Biomedical Sensors

Due to the proliferative cancer rates, cardiovascular diseases, neurodegenerative disorders, autoimmune diseases and a plethora of infections across the globe, it is essential to introduce strategies that can rapidly and specifically detect the ultralow concentrations of relevant biomarkers, pathogens, toxins and pharmaceuticals in biological matrices. Considering these pathophysiologies, various research works have become necessary to fabricate biosensors for their early diagnosis and treatment, using nanomaterials like quantum dots (QDs). These nanomaterials effectively ameliorate the sensor performance with respect to their reproducibility, selectivity as well as sensitivity. In particular, graphene quantum dots (GQDs), which are ideally graphene fragments of nanometer size, constitute discrete features such as acting as attractive fluorophores and excellent electro-catalysts owing to their photo-stability, water-solubility, biocompatibility, non-toxicity and lucrativeness that make them favorable candidates for a wide range of novel biomedical applications. Herein, we reviewed about 300 biomedical studies reported over the last five years which entail the state of art as well as some pioneering ideas with respect to the prominent role of GQDs, especially in the development of optical, electrochemical and photoelectrochemical biosensors. Additionally, we outline the ideal properties of GQDs, their eclectic methods of synthesis, and the general principle behind several biosensing techniques.

Label-free and enzyme-free detection of microRNA based on a hybridization chain reaction with hemin/G-quadruplex enzymatic catalysis-induced MoS2 quantum dots via the inner filter effect

A new simple, sensitive and specific strategy for microRNA analysis has been described based on a hybridization chain reaction with hemin/G-quadruplex enzymatic catalysis-induced MoS2 quantum dots via the inner filter effect. The target microRNA triggers the hybridization chain reaction between two DNA probes to generate long dsDNA with many hemin/G-quadruplex DNAzymes in the presence of hemin. With the assistance of H2O2, the produced hemin/G-quadruplex DNAzyme could oxidize o-phenylenediamine (OPD) to 2,3-diaminophenazine (DAP) directly, resulting in the fluorescence quenching of MoS2 quantum dots via the inner filter effect. As an example, the fluorescence response of MoS2 quantum dots is linearly related with the logarithm of the microRNA let-7a concentration with a detection limit of 42 fM. The proposed label-free assay has promising potential to be applied in practical diagnosis.

Green synthesis, biomedical and biotechnological applications of carbon and graphene quantum dots. A review

Carbon and graphene quantum dots are prepared using top-down and bottom-up methods. Sustainable synthesis of quantum dots has several advantages such as the use of low-cost and non-toxic raw materials, simple operations, expeditious reactions, renewable resources and straightforward post-processing steps. These nanomaterials are promising for clinical and biomedical sciences, especially in bioimaging, diagnosis, bioanalytical assays and biosensors. Here we review green methods for the fabrication of quantum dots, and biomedical and biotechnological applications.

Highly sensitive and simultaneous detection of microRNAs in serum using stir-bar assisted magnetic DNA nanospheres-encoded probes

There are critical interests in the detection of microRNA (miRNA) because it can be a blood-borne biomarker, but analytical strategies are still limited by its small size, high sequence homology among family members and low abundance. In this work, three-dimensional magnetic DNA nanospheres were synthesized and immobilized on a gold stir-bar as encoded probes for miRNA capture and signal amplification. Electrochemical tags-labeled DNAs were immobilized on gold coated magnetic nanospheres via a hyperbranched hybridization chain reaction (HHCR). Subsequently, the magnetic DNA nanospheres were immobilized on the gold stir-bar as encoded probes. Target miRNAs were captured on the surface of the stir-bar by replacing the magnetic DNA nanospheres-encoded probes, and the probes were magnetically enriched for highly sensitive and selective electrochemical detection. The gold stir-bar assisted magnetic DNA nanospheres-encoded probes possess dual functions: They are as a nanocarrier to increase the loading amounts of HHCR products, and they are also a platform for efficient electrochemical signal amplification via magnetic enrichment. The method was successfully applied for the detection of miRNA21 and miRNA155 in a wide linear range of 5 fM to 2 nM, and with detection limits of 1.5 fM and 1.8 fM, respectively. The preliminary application of the method suggests that it has great potential in the detection of miRNAs in serum samples.

Sequence-Specific Detection of Unlabeled Nucleic Acid Biomarkers Using a "One-Pot" 3D Molecular Sensor

DNA and RNA biomarkers have not progressed beyond the automated specialized clinic due to failure in the reproducibility necessary to standardize robust and rapid nucleic acid detection at the point of care, where health outcomes can be most improved by early-stage diagnosis and precise monitoring of therapy and disease prognosis. We demonstrate here a new analytical platform to meet this challenge using functional 3D hydrogels engineered from peptide and oligonucleotide building blocks to provide sequence-specific, PCR-free fluorescent detection of unlabeled nucleic acid sequences. We discriminated at picomolar detection limits (<7 pM) "perfect-match" from mismatched sequences, down to a single nucleotide mutation, buried within longer lengths of the target. Detailed characterization by NMR, TEM, mass spectrometry, and rheology provided the structural understanding to design these hybrid peptide-oligonucleotide biomaterials with the desired sequence sensitivity and detection limit. We discuss the generic design, which is based on a highly predictable secondary structure of the oligonucleotide components, as a platform to detect genetic abnormalities and to screen for pathogenic conditions at the level of both DNA (e.g., SNPs) and RNA (messenger, micro, and viral genomic RNA).