Hybrid Silk Fibers Dry-Spun from Regenerated Silk Fibroin/Graphene Oxide Aqueous Solutions

Hierarchical design of silkworm silk for functional composites

Silk-reinforced composites (SRCs) manifest the unique properties of silkworm silk fibers, offering enhanced mechanical strength, biocompatibility, and biodegradability. These composites present an eco-friendly alternative to conventional synthetic materials, with applications expanding beyond biomedical engineering, flexible electronics, and environmental filtration. This review explores the diverse forms of silkworm silk fibers including fabrics, long fibers, and nanofibrils, for functional composites. It highlights advancements in composite design and processing techniques that allow precise engineering of mechanical and functional performance. Despite substantial progress, challenges remain in making optimally functionalized SRCs with multi-faceted performance and understanding the mechanics for reverse-design of SRCs. Future research should focus on the unique sustainable, biodegradable and biocompatible advantages and embrace advanced processing technology, as well as artificial intelligence-assisted material design to exploit the full potential of SRCs. This review on SRCs will offer a foundation for future advancements in multifunctional and high-performance silk-based composites.

Strong MXene Induced Conductive Silk Fibers

Conductive silk fibers (CSFs) are attractive in the field of flexible wearable electronics and textiles, but it still exists a great challenge to simultaneously enhance the electrical conductivity and mechanical properties. Inspired by the core-sheath structure of Bombyx mori silks, a continuous strategy is demonstrated for the fabrication the strong MXene induced conductive silk fibers (MCSFs). The sericin sheath of silk fibers (SFs) is replaced by MXene/sodium alginate (MSA) layer, and the ultrathin sheath layer is tightly bridged with the core through strong interfacial interactions, including hydrogen bonds and electrostatic interactions. Therefore, the MCSFs show extraordinary tensile strength of 1037.9 MPa and outstanding electrical conductivity of 6400 S m-1, which exhibits obvious advantages compared with the previous reported silk fibers modified by other methods. In addition, the MCSFs also have a high toughness of 194.9 MJ m-3 and an ultra-sensitive gauge factor of 2269.3, resulting in their ability to monitor human pulse, body movements, and changes of ambient humidity in real time. The proposed bioinspired strategy for continuously fabricating ultra-strong and tough MCSFs provides an avenue for implementing functionalized silk fibers in next-generation wearable technologies, intelligent textiles, and human-machine interaction etc.

Construction of Cells-Membrane-Cells Living Complexes for Cartilage Repair by Enhancing the Structural Stability of Fibrous Membranes

3D cartilage tissue engineering scaffolds with stable structures are crucial for promoting cartilage tissue growth and repair. However, limited research attention is given to the effects of 3D cells-membrane-cells sandwich-like living complexes with enhanced structural stability for cartilage repair. In this study, silk fibroin/graphene oxide@kartogenin (SF/GO@KGN) fibrous membranes with improved structural stability are developed through the regulation of the crystallinity, and living complexes are constructed for cartilage repair using rat bone marrow stromal cells (rBMSCs) and the SF/GO@KGN fibrous membranes. Results show that the physicochemical properties of the SF/GO@KGN fibrous membranes, including morphology, tensile strength, swelling ratio, degradation, and KGN release rate are greatly influenced by the crystallinity of the fibrous membranes. The enhanced structural stability of the fibrous membranes promotes the adhesion, proliferation, and chondrogenic differentiation of rBMSCs on the surface of the fibrous membranes, as well as the deposition of the cartilage's extracellular matrix (ECM). Animal experiments demonstrate that sandwich-like cells-membrane-cells living complexes with high structural stability significantly promote early cartilage formation and ECM deposition. This study not only provides a facile and effective strategy for cartilage regeneration and repair but also provides new insights for designing and preparing other tissue engineering scaffolds.

Self-reinforced silk nanofibrils networks enable ultrafine fibroin monofilament sutures applied in minimally invasive surgery

Superfine recycled regenerated silk fibroin (RRSF) monofilament sutures are designed to minimize surgical incisions, prevent scar formation, and facilitate precise suturing in cosmetic and plastic surgeries. However, balancing fineness and strength remains a challenge because the RRSF extraction process disrupts the hierarchical structure of natural silk fibers, leading to suboptimal mechanical properties. This study employed mechanical peeling and grinding to exfoliate β-sheets-rich silk fibroin nanofibrils (SFNF), which served as homologous reinforcing materials uniformly dispersed in the RRSF spinning system. Water-soluble, biocompatible polyvinyl alcohol (PVA) was introduced to enhance ductility. The fiber underwent extensive water immersion stretching to produce ultrafine fibers and foster a highly oriented internal self-reinforcing SFNF network structure. Monofilament surgical sutures were successfully fabricated following surface coating with chitosan. Our results showed that with 0.1 wt% SFNF and a stretching multiplier of 2.5, the tensile strength of the fibers increased by 33 % compared to those without SFNF. Fluorescence staining confirmed the presence of highly oriented SFNF networks within the fibers. Mechanical simulations validated the pronounced reinforcement effect of this network structure. The sutures, measuring 39.38 μm in diameter and exhibiting a tensile strength of 0.31 N, met USP standards for 9-0 surgical sutures, making them suitable for microsurgery. Additionally, they demonstrated antibacterial properties, biocompatibility, and degraded at a rate of 43.09 % within 30 days. In animal trials, the sutures facilitated wound closure, reduced inflammatory responses, and minimized scar formation.

Silk-based biomaterials for tissue engineering

Tissue engineering (TE) involves repairing, replacing, regeneration, or improving the function of tissues and organs by combining cells, growth factors and scaffold materials. Among these, scaffold materials play a crucial role. Silk fibroin (SF), a natural biopolymer, has been widely used in the TE field due to its good biodegradability, biocompatibility, and mechanical properties attributed to its chemical composition and structure. This paper reviews the structure, extraction, and modification methods of SF. In addition, it discusses SF's regulation of cell behavior and its various processing modes. Finally, the applications of SF in TE and perspectives on future developments are presented. This review provides comprehensive and alternative rational insights for further biomedical translation in SF medical device design, further revealing the great potential of SF biomaterials.

High-performance magnetic artificial silk fibers produced by a scalable and eco-friendly production method

Flexible magnetic materials have great potential for biomedical and soft robotics applications, but they need to be mechanically robust. An extraordinary material from a mechanical point of view is spider silk. Recently, methods for producing artificial spider silk fibers in a scalable and all-aqueous-based process have been developed. If endowed with magnetic properties, such biomimetic artificial spider silk fibers would be excellent candidates for making magnetic actuators. In this study, we introduce magnetic artificial spider silk fibers, comprising magnetite nanoparticles coated with meso-2,3-dimercaptosuccinic acid. The composite fibers can be produced in large quantities, employing an environmentally friendly wet-spinning process. The nanoparticles were found to be uniformly dispersed in the protein matrix even at high concentrations (up to 20% w/w magnetite), and the fibers were superparamagnetic at room temperature. This enabled external magnetic field control of fiber movement, rendering the material suitable for actuation applications. Notably, the fibers exhibited superior mechanical properties and actuation stresses compared to conventional fiber-based magnetic actuators. Moreover, the fibers developed herein could be used to create macroscopic systems with self-recovery shapes, underscoring their potential in soft robotics applications.

Supplementary information

The online version contains supplementary material available at 10.1007/s42114-024-00962-y.

A review on the use of composites of a natural protein, silk fibroin with Mxene/carbonaceous materials in biomedical science

Silk fibroin (SF), a natural biodegradable and biocompatible protein, has garnered significant attention in biomedical applications due to its impressive properties, including excellent biocompatibility, biodegradability, and mechanical resilience. Nevertheless, its broader usage faces obstacles by its insufficient mechanical strength and electrical conductivity. In order to address these constraints, recent studies have concentrated on combining SF with cutting-edge nanomaterials like MXene and carbon-based materials. This review comprehensively examines the applications and potential of silk fibroin-MXene/carbon-based nanocomposites in biomedical fields. The unique properties of SF, MXene, and carbon-based materials are explored, emphasizing how their combination enhances mechanical strength, conductivity, and biocompatibility. These composites show substantial enhancements in performance for several biomedical applications by utilising the excellent conductivity and mechanical capabilities of MXene and carbonaceous elements. The innovative potential of these nanocomposites is highlighted by critically discussing key applications such as tissue engineering, drug delivery, and biosensing. In addition, the work discusses the latest research progress, difficulties, and future prospects in the sector, providing valuable insights into possible breakthroughs and uses. This review seeks to comprehensively analyse the existing information on silk fibroin-MXene/carbon based nanocomposites in healthcare.

Strategies for Making High-Performance Artificial Spider Silk Fibers

Artificial spider silk is an attractive material for many technical applications since it is a biobased fiber that can be produced under ambient conditions but still outcompetes synthetic fibers (e.g., Kevlar) in terms of toughness. Industrial use of this material requires bulk-scale production of recombinant spider silk proteins in heterologous host and replication of the pristine fiber's mechanical properties. High molecular weight spider silk proteins can be spun into fibers with impressive mechanical properties, but the production levels are too low to allow commercialization of the material. Small spider silk proteins, on the other hand, can be produced at yields that are compatible with industrial use, but the mechanical properties of such fibers need to be improved. Here, the literature on wet-spinning of artificial spider silk fibers is summarized and analyzed with a focus on mechanical performance. Furthermore, several strategies for how to improve the properties of such fibers, including optimized protein composition, smarter spinning setups, innovative protein engineering, chemical and physical crosslinking as well as the incorporation of nanomaterials in composite fibers, are outlined and discussed.

Silk-based wearable devices for health monitoring and medical treatment

Previous works have focused on enhancing the tensile properties, mechanical flexibility, biocompatibility, and biodegradability of wearable devices for real-time and continuous health management. Silk proteins, including silk fibroin (SF) and sericin, show great advantages in wearable devices due to their natural biodegradability, excellent biocompatibility, and low fabrication cost. Moreover, these silk proteins possess great potential for functionalization and are being explored as promising candidates for multifunctional wearable devices with sensory capabilities and therapeutic purposes. This review introduces current advancements in silk-based constituents used in the assembly of wearable sensors and adhesives for detecting essential physiological indicators, including metabolites in body fluids, body temperature, electrocardiogram (ECG), electromyogram (EMG), pulse, and respiration. SF and sericin play vital roles in addressing issues related to discomfort reduction, signal fidelity improvement, as well as facilitating medical treatment. These developments signify a transition from hospital-centered healthcare toward individual-centered health monitoring and on-demand therapeutic interventions.

Overexpression of bond-forming active protein for efficient production of silk with structural changes and properties enhanced in silkworm

Silkworm silk exhibits excellent mechanical properties, biocompatibility, and has potential applications in the biomedical sector. This study focused on enhancing the mechanical properties of Bombyx mori silk by overexpressing three bond-forming active proteins (BFAPs): AFP, HSP, and CRP in the silk glands of silkworms. Rheological tests confirmed increased viscoelasticity in the liquid fibroin stock solution of transgenic silkworms, and dynamic mechanical thermal analysis (DMTA) indicated that all three BFAPs participated in the interactions between fibroin molecular networks in transgenic silk. The mechanical property assay indicated that all three BFAPs improved the mechanical characteristics of transgenic silk, with AFP and HSP having the most significant effects. A synchrotron radiation Fourier transform infrared spectroscopy assay showed that all three BFAPs increased the β-sheet content of transgenic silk. Synchrotron radiation wide-angle X-ray diffraction assay showed that all three BFAPs changed the crystallinity, crystal size, and orientation factor of the silk. AFP and HSP significantly improved the mechanical attributes of transgenic silk through increased crystallinity, refined crystal size, and a slight decrease in orientation. This study opens new possibilities for modifying silk and other fiber materials.

Engineering periodontal tissue interfaces using multiphasic scaffolds and membranes for guided bone and tissue regeneration

Periodontal diseases are one of the greatest healthcare burdens worldwide. The periodontal tissue compartment is an anatomical tissue interface formed from the periodontal ligament, gingiva, cementum, and bone. This multifaceted composition makes tissue engineering strategies challenging to develop due to the interface of hard and soft tissues requiring multiphase scaffolds to recreate the native tissue architecture. Multilayer constructs can better mimic tissue interfaces due to the individually tuneable layers. They have different characteristics in each layer, with modulation of mechanical properties, material type, porosity, pore size, morphology, degradation properties, and drug-releasing profile all possible. The greatest challenge of multilayer constructs is to mechanically integrate consecutive layers to avoid delamination, especially when using multiple manufacturing processes. Here, we review the development of multilayer scaffolds that aim to recapitulate native periodontal tissue interfaces in terms of physical, chemical, and biological characteristics. Important properties of multiphasic biodegradable scaffolds are highlighted and summarised, with design requirements, biomaterials, and fabrication methods, as well as post-treatment and drug/growth factor incorporation discussed.

Harnessing Natural Polymers for Nano-Scaffolds in Bone Tissue Engineering: A Comprehensive Overview of Bone Disease Treatment

Numerous surgeries are carried out to replace tissues that have been harmed by an illness or an accident. Due to various surgical interventions and the requirement of bone substitutes, the emerging field of bone tissue engineering attempts to repair damaged tissues with the help of scaffolds. These scaffolds act as template for bone regeneration by controlling the development of new cells. For the creation of functional tissues and organs, there are three elements of bone tissue engineering that play very crucial role: cells, signals and scaffolds. For the achievement of these aims, various types of natural polymers, like chitosan, chitin, cellulose, albumin and silk fibroin, have been used for the preparation of scaffolds. Scaffolds produced from natural polymers have many advantages: they are less immunogenic as well as being biodegradable, biocompatible, non-toxic and cost effective. The hierarchal structure of bone, from microscale to nanoscale, is mostly made up of organic and inorganic components like nanohydroxyapatite and collagen components. This review paper summarizes the knowledge and updates the information about the use of natural polymers for the preparation of scaffolds, with their application in recent research trends and development in the area of bone tissue engineering (BTE). The article extensively explores the related research to analyze the advancement of nanotechnology for the treatment of bone-related diseases and bone repair.

Biopolymers for Tissue Engineering: Crosslinking, Printing Techniques, and Applications

Currently, tissue engineering has been dedicated to the development of 3D structures through bioprinting techniques that aim to obtain personalized, dynamic, and complex hydrogel 3D structures. Among the different materials used for the fabrication of such structures, proteins and polysaccharides are the main biological compounds (biopolymers) selected for the bioink formulation. These biomaterials obtained from natural sources are commonly compatible with tissues and cells (biocompatibility), friendly with biological digestion processes (biodegradability), and provide specific macromolecular structural and mechanical properties (biomimicry). However, the rheological behaviors of these natural-based bioinks constitute the main challenge of the cell-laden printing process (bioprinting). For this reason, bioprinting usually requires chemical modifications and/or inter-macromolecular crosslinking. In this sense, a comprehensive analysis describing these biopolymers (natural proteins and polysaccharides)-based bioinks, their modifications, and their stimuli-responsive nature is performed. This manuscript is organized into three sections: (1) tissue engineering application, (2) crosslinking, and (3) bioprinting techniques, analyzing the current challenges and strengths of biopolymers in bioprinting. In conclusion, all hydrogels try to resemble extracellular matrix properties for bioprinted structures while maintaining good printability and stability during the printing process.

Evaluation and Application of Silk Fibroin Based Biomaterials to Promote Cartilage Regeneration in Osteoarthritis Therapy

Osteoarthritis (OA) is a common joint disease characterized by cartilage damage and degeneration. Traditional treatments such as NSAIDs and joint replacement surgery only relieve pain and do not achieve complete cartilage regeneration. Silk fibroin (SF) biomaterials are novel materials that have been widely studied and applied to cartilage regeneration. By mimicking the fibrous structure and biological activity of collagen, SF biomaterials can promote the proliferation and differentiation of chondrocytes and contribute to the formation of new cartilage tissue. In addition, SF biomaterials have good biocompatibility and biodegradability and can be gradually absorbed and metabolized by the human body. Studies in recent years have shown that SF biomaterials have great potential in treating OA and show good clinical efficacy. Therefore, SF biomaterials are expected to be an effective treatment option for promoting cartilage regeneration and repair in patients with OA. This article provides an overview of the biological characteristics of SF, its role in bone and cartilage injuries, and its prospects in clinical applications to provide new perspectives and references for the field of bone and cartilage repair.

On-Demand Transient Paper Substrate for Selective Disposability of Thin-Film Electronic Devices

This study demonstrates a novel approach to creating a thin-film electronic device that offers selective or complete disposability only in on-demand conditions while maintaining stable operation reliability during everyday use. The approach involves a transient paper substrate, combined with phase change encapsulation and highly bendable planarization materials, achieved through a simple solution process. The substrate used in this study offers a smooth surface morphology that enables the creation of stable multilayers for thin-film electronic devices. It also exhibits superior waterproof properties, which allows the proof-of-concept organic light-emitting device to function even when submerged in water. Additionally, the substrate provides controlled surface roughness under repeated bending, demonstrating reliable folding stability for 1000 cycles at 10 mm of curvature. Furthermore, a specific component of the electronic device can be selectively made to malfunction through predetermined voltage input, and the entire device can be fully disposed of via Joule-heating-induced combustion.

"Click" Reaction-Mediated Silk Fibroin-Functionalized Thiol-Branched Graphene Oxide Quantum Dots for Smart Sensing of Tetracycline

The abuse of tetracycline (TC) antibiotics causes the accumulation of their residue in the environment, which has an irreversible impact on food safety and human health. In light of this, it is vital to offer a portable, quick, efficient, and selective sensing platform to detect TC instantly. Herein, we have successfully developed a sensor using silk fibroin-decorated thiol-branched graphene oxide quantum dots through a well-known thiol-ene click reaction. It is applied to ratiometric fluorescence sensing of TC in real samples in the linear range of 0-90 nM, with the detection limit of 49.69, 47.76, 55.25, 47.90, and 45.78 nM for deionized water, chicken sample, fish sample, human blood serum, and honey sample, respectively. With the gradual addition of TC to the liquid media, the sensor develops a synergetic luminous effect in which the fluorescence intensity of the nanoprobe steadily declines at 413 nm, while the intensity of a newly emerging peak increases at 528 nm, maintaining a ratio that is dependent on the analyte concentration. The increase of luminescence properties in the liquid media is clearly visible by naked eyes in the presence of 365 nm UV light. The result helps us in building a filter paper strip-based portable smart sensor using an electric circuit comprising a 365 nm LED (light-emitting diode) powered by a mobile phone battery which is attached just below the rear camera of a smartphone. The camera of the smartphone captures the color changes that occur throughout the sensing process and translates into readable RGB data. The dependency of color intensity with respect to the concentration of TC was evaluated by deducing a calibration curve from where the limit of detection was calculated and found to be 0.125 μM. These kinds of gadgets are important for the possible real-time, on-the-spot, quick detection of analytes in situations where high-end approaches are not easily accessible.

A one-pot approach to prepare stretchable and conductive regenerated silk fibroin/CNT films as multifunctional sensors

Silk fibroin (SF)-based materials are characterized by their outstanding biocompatibility and biodegradability and are considered as the most promising candidates for next-generation flexible electronics. In order to generate such devices, SF can be mixed with carbon nanotubes (CNTs) which feature excellent mechanical, electrical, and thermal properties. However, obtaining regenerated SF with homogeneous dispersion of CNTs in a sustainable manner represents a challenging task, mainly due to the difficulty in overcoming van der Waals forces and strong π-π interactions that hold together the CNT structure. In this study, a one-pot strategy for fabricating SF/CNT films is proposed by designing SF as a modifier of CNTs through non-covalent interactions with the assistance of aqueous phosphoric acid solution. Glycerol (GL) was introduced, endowing the SF/GL/CNT composite film with excellent flexibility and stretchability. The sustainable strategy greatly simplifies the preparation process, avoiding dialysis of SF and the use of artificial dispersants. The as-fabricated SF/GL/CNT films showed an excellent mechanical strength of 1.20 MPa and high sensitivity with a gauge factor of up to 13.7 toward tensile deformation. The composite films had a sensitive monitoring capability for small strains with detection limits as low as 1% and can be assembled into versatile sensors to detect human movement. Simultaneously, the composite films showed a superb thermosensitive capacity (1.64% °C^-1), which satisfied the requirement of real-time and continuous skin temperature monitoring. We anticipate that the presented one-pot strategy and the prepared composite films could open a new avenue for forthcoming technologies for electronic skins, personal health monitoring, and wearable electronics.

Biomedical applications of chitosan/silk fibroin composites: A review

Natural polymers have been used in the biomedical fields for decades, mainly derived from animals and plants with high similarities with biomacromolecules in the human body. As an alkaline polysaccharide, chitosan (CS) attracts much attention in tissue regeneration and drug delivery with favorable biocompatibility, biodegradation, and antibacterial activity. However, to overcome its mechanical properties and degradation behavior drawbacks, a robust fibrous protein-silk fibroin (SF) was introduced to prepare the CS/SF composites. Not only can CS be combined with SF via the amide and hydrogen bond formation, but also their functions are complementary and tunable with the blending ratio. To further improve the performances of CS/SF composites, natural (e.g., hyaluronic acid and collagen) and synthetic biopolymers (e.g., polyvinyl alcohol and hexanone) were incorporated. Also, the CS/SF composites acted as slow-release carriers for inorganic non-metals (e.g., hydroxyapatite and graphene) and metal particles (e.g., silver and magnesium), which could enhance cell functions, facilitate tissue healing, and inhibit bacterial growth. This review presents the state-of-the-art and future perspectives of different biomaterials combined with CS/SF composites as sponges, hydrogels, membranes, particles, and coatings. Emphasis is devoted to the biological potentialities of these hybrid systems, which look rather promising toward a multitude of applications.

3D-Printing of Silk Nanofibrils Reinforced Alginate for Soft Tissue Engineering

The main challenge of extrusion 3D bioprinting is the development of bioinks with the desired rheological and mechanical performance and biocompatibility to create complex and patient-specific scaffolds in a repeatable and accurate manner. This study aims to introduce non-synthetic bioinks based on alginate (Alg) incorporated with various concentrations of silk nanofibrils (SNF, 1, 2, and 3 wt.%) and optimize their properties for soft tissue engineering. Alg-SNF inks demonstrated a high degree of shear-thinning with reversible stress softening behavior contributing to extrusion in pre-designed shapes. In addition, our results confirmed the good interaction between SNFs and alginate matrix resulted in significantly improved mechanical and biological characteristics and controlled degradation rate. Noticeably, the addition of 2 wt.% SNF improved the compressive strength (2.2 times), tensile strength (5 times), and elastic modulus (3 times) of alginate. In addition, reinforcing 3D-printed alginate with 2 wt.% SNF resulted in increased cell viability (1.5 times) and proliferation (5.6 times) after 5 days of culturing. In summary, our study highlights the favorable rheological and mechanical performances, degradation rate, swelling, and biocompatibility of Alg-2SNF ink containing 2 wt.% SNF for extrusion-based bioprinting.

A Comprehensive Review on Silk Fibroin as a Persuasive Biomaterial for Bone Tissue Engineering

Bone tissue engineering (BTE) utilizes a special mix of scaffolds, cells, and bioactive factors to regulate the microenvironment of bone regeneration and form a three-dimensional bone simulation structure to regenerate bone tissue. Silk fibroin (SF) is perhaps the most encouraging material for BTE given its tunable mechanical properties, controllable biodegradability, and excellent biocompatibility. Numerous studies have confirmed the significance of SF for stimulating bone formation. In this review, we start by introducing the structure and characteristics of SF. After that, the immunological mechanism of SF for osteogenesis is summarized, and various forms of SF biomaterials and the latest development prospects of SF in BTE are emphatically introduced. Biomaterials based on SF have great potential in bone tissue engineering, and this review will serve as a resource for future design and research.

Silk-Based Biomaterials for Designing Bioinspired Microarchitecture for Various Biomedical Applications

Biomaterial research has led to revolutionary healthcare advances. Natural biological macromolecules can impact high-performance, multipurpose materials. This has prompted the quest for affordable healthcare solutions, with a focus on renewable biomaterials with a wide variety of applications and ecologically friendly techniques. Imitating their chemical compositions and hierarchical structures, bioinspired based materials have elevated rapidly over the past few decades. Bio-inspired strategies entail extracting fundamental components and reassembling them into programmable biomaterials. This method may improve its processability and modifiability, allowing it to meet the biological application criteria. Silk is a desirable biosourced raw material due to its high mechanical properties, flexibility, bioactive component sequestration, controlled biodegradability, remarkable biocompatibility, and inexpensiveness. Silk regulates temporo-spatial, biochemical and biophysical reactions. Extracellular biophysical factors regulate cellular destiny dynamically. This review examines the bioinspired structural and functional properties of silk material based scaffolds. We explored silk types, chemical composition, architecture, mechanical properties, topography, and 3D geometry to unlock the body's innate regenerative potential, keeping in mind the novel biophysical properties of silk in film, fiber, and other potential forms, coupled with facile chemical changes, and its ability to match functional requirements for specific tissues.

Tailoring micro/nano-fibers for biomedical applications

Nano/micro fibers have evoked much attention of scientists and have been researched as cutting edge and hotspot in the area of fiber science in recent years due to the rapid development of various advanced manufacturing technologies, and the appearance of fascinating and special functions and properties, such as the enhanced mechanical strength, high surface area to volume ratio and special functionalities shown in the surface, triggered by the nano or micro-scale dimensions. In addition, these outstanding and special characteristics of the nano/micro fibers impart fiber-based materials with wide applications, such as environmental engineering, electronic and biomedical fields. This review mainly focuses on the recent development in the various nano/micro fibers fabrication strategies and corresponding applications in the biomedical fields, including tissue engineering scaffolds, drug delivery, wound healing, and biosensors. Moreover, the challenges for the fabrications and applications and future perspectives are presented.

Superelastic and multifunctional fibroin aerogels from multiscale silk micro-nanofibrils exfoliated via deep eutectic solvent

Superelastic silk fibroin (SF)-based aerogels can be used as multifunctional substrates, exhibiting a promising prospect in air filtration, thermal insulation, and biomedical materials. However, fabrication of the superelastic pure SF aerogels without adding synthetic polymers remains challenging. Here, the SF micro-nano fibrils (SMNFs) that preserved mesostructures are extracted from SF fibers as building blocks of aerogels by a controllable deep eutectic solvent liquid exfoliation technique. SMNFs can assemble into multiscale fibril networks during the freeze-inducing process, resulting in all-natural SMNF aerogels (SMNFAs) with hierarchical cellular architectures after lyophilization. Benefiting from these structural features, the SMNFAs demonstrate desirable properties including ultra-low density (as low as 4.71 mg/cm³) and superelasticity (over 85 % stress retention after 100 compression cycles at 60 % strain). Furthermore, the potential applications of superelastic SMNFAs in air purification and thermal insulation are investigated to exhibit their functionality, mechanical elasticity, and structural stability. This work provides a reliable approach for the fabrication of highly elastic SF aerogels and endows application prospects in air purification and thermal insulation opportunities.

Biological investigation of a novel nanocomposite based on functionalized graphene oxide nanosheets with pectin, silk fibroin and zinc chromite nanoparticles

For biotechnology applications, a novel nanobiocomposite was synthesized based on modification of graphene oxide (GO) by extracted silk fibroin (SF), natural polymer pectin (Pec) and zinc chromite (ZnCr₂O₄) nanoparticles (NPs). The structure and properties of hybrid nanobiocomposite GO-Pec/SF/ZnCr₂O₄ such as thermal stability, less toxicity, biocompatibility, antibacterial, and biodegradable were proved by using field emission scanning electron microscope (FE-SEM), Fourier-transformed infrared (FT-IR), Energy dispersive X-ray spectroscopy (EDS), thermal gravimetric analysis (TGA), and X-Ray diffraction (XRD). According to the biological features of substances, the GO-Pec/SF/ZnCr₂O₄ nanobiocomposite shows perfect results in MTT (83.71 %) and Hemolysis (16.52 %) assays. accordingly, mentioned properties of this nanobiocomposite can be used as a scaffold for medical applications.

Bioinspired silk fibroin materials: From silk building blocks extraction and reconstruction to advanced biomedical applications

Silk fibroin has become a promising biomaterial owing to its remarkable mechanical property, biocompatibility, biodegradability, and sufficient supply. However, it is difficult to directly construct materials with other formats except for yarn, fabric and nonwoven based on natural silk. A promising bioinspired strategy is firstly extracting desired building blocks of silk, then reconstructing them into functional regenerated silk fibroin (RSF) materials with controllable formats and structures. This strategy could give it excellent processability and modifiability, thus well meet the diversified needs in biomedical applications. Recently, to engineer RSF materials with properties similar to or beyond the hierarchical structured natural silk, novel extraction and reconstruction strategies have been developed. In this review, we seek to describe varied building blocks of silk at different levels used in biomedical field and their effective extraction and reconstruction strategies. This review also present recent discoveries and research progresses on how these functional RSF biomaterials used in advanced biomedical applications, especially in the fields of cell-material interactions, soft tissue regeneration, and flexible bioelectronic devices. Finally, potential study and application for future opportunities, and current challenges for these bioinspired strategies and corresponding usage were also comprehensively discussed. In this way, it aims to provide valuable references for the design and modification of novel silk biomaterials, and further promote the high-quality-utilization of silk or other biopolymers.

Conductive silk fibroin hydrogel with semi-interpenetrating network with high toughness and fast self-recovery for strain sensors

Regenerated silk fibroin (RSF) hydrogels have been extensively studied in the fields of biomedicine and wearable devices in recent years due to their outstanding biocompatibility. However, the pure RSF hydrogels usually exhibited frangibility and low ductility, limiting their application in many aspects severely. Herein, we demonstrate a tough RSF/poly (N, N-dimethylallylamine) hydrogel with semi-interpenetrating network, which possesses good mechanical properties with high stretchability (ε_b = 900%), tensile strength (σ_b = 101.7 kPa), toughness (W_f = 516.7 kJ/m³) and tearing fracture energy (T = 407.3 J/m²). Besides, the gels show low residual strain in the cyclic tests and rapid self-recovery (80% toughness recovery within 5 min with the maximum strain of 400%). Moreover, the gels also show high ionic conductivity due to the incorporation of the NaCl and the hydrogel can act as an ideal candidate for strain sensor with high sensitivity (GF = 1.84), admirable linearity, and good durability (1000 cycles with the strain of 100%). When used as a wearable strain sensor for monitoring human movements, it also can detect small and large deformations with high sensitivity. It is expected that this work can provide a new strategy for the fabrication of smart RSF-based hydrogels and expand their application in multiple scenarios.

Silk Fibroin-Based Biomaterials for Tissue Engineering Applications

Tissue engineering (TE) involves the combination of cells with scaffolding materials and appropriate growth factors in order to regenerate or replace damaged and degenerated tissues and organs. The scaffold materials serve as templates for tissue formation and play a vital role in TE. Among scaffold materials, silk fibroin (SF), a naturally occurring protein, has attracted great attention in TE applications due to its excellent mechanical properties, biodegradability, biocompatibility, and bio-absorbability. SF is usually dissolved in an aqueous solution and can be easily reconstituted into different forms, including films, mats, hydrogels, and sponges, through various fabrication techniques, including spin coating, electrospinning, freeze drying, and supercritical CO₂-assisted drying. Furthermore, to facilitate the fabrication of more complex SF-based scaffolds, high-precision techniques such as micro-patterning and bio-printing have been explored in recent years. These processes contribute to the diversity of surface area, mean pore size, porosity, and mechanical properties of different silk fibroin scaffolds and can be used in various TE applications to provide appropriate morphological and mechanical properties. This review introduces the physicochemical and mechanical properties of SF and looks into a range of SF-based scaffolds that have recently been developed. The typical applications of SF-based scaffolds for TE of bone, cartilage, teeth and mandible tissue, cartilage, skeletal muscle, and vascular tissue are highlighted and discussed followed by a discussion of issues to be addressed in future studies.

Silk Hydrogel for Tissue Engineering: A Review

AIM

This review aims to explore the importance of silk hydrogel and its potential in tissue engineering (TE).

BACKGROUND

Tissue engineering is a procedure that incorporates cells into the scaffold materials with suitable growth factors to regenerate injured tissue. For tissue formation in TE, the scaffold material plays a key role. Different forms of silk fibroin (SF), such as films, mats, hydrogels, and sponges, can be easily manufactured when SF is disintegrated into an aqueous solution. High precision procedures such as micropatterning and bioprinting of SF-based scaffolds have been used for enhanced fabrication.

REVIEW RESULTS

In this narrative review, SF physicochemical and mechanical properties have been presented. We have also discussed SF fabrication techniques like electrospinning, spin coating, freeze-drying, and physiochemical cross-linking. The application of SF-based scaffolds for skeletal, tissue, joint, muscle, epidermal, tissue repair, and tympanic membrane regeneration has also been addressed.

CONCLUSION

SF has excellent mechanical properties, tunability, biodegradability, biocompatibility, and bioresorbability.

CLINICAL SIGNIFICANCE

Silk hydrogels are an ideal scaffold matrix material that will significantly impact tissue engineering applications, given the rapid scientific advancements in this field.

Facile One-Pot Method for All Aqueous Green Formation of Biocompatible Silk Fibroin-Poly(Ethylene Oxide) Fibers for Use in Tissue Engineering

Silk fibroin (SF) fibers are highly regarded in tissue engineering because of their outstanding biocompatibility and tunable properties. A challenge remains in overcoming the trade-off between functioning and biocompatible fibers and the use of cytotoxic, environmentally harmful organic solvents in their processing and formation. The aim of this research was to produce biocompatible SF fibers without the use of cytotoxic solvents, via pressurized gyration (PG). Aqueous SF was blended with poly(ethylene oxide) (PEO) in ratios of 80:20 (labeled SF-PEO 80:20) and 90:10 (labeled SF-PEO 90:10) and spun into fibers using PG, assisted by a range of applied pressures and heat. Pure PEO (labeled PEO-Aq) and SF solubilized in hexafluoro-isopropanol (HFIP) (labeled SF-HFIP) and aqueous SF (labeled SF-Aq) were also prepared for comparison. The resulting fibers were characterized using SEM, TGA, and FTIR. Their in vitro cell behavior was analyzed using a Live/Dead assay and cell proliferation studies with the SaOS-2 human bone osteosarcoma cell line (ATCC, HTB-85) and human fetal osteoblast cells (hFob) (ATCC, CRL-11372) in 2D culture conditions. Fibers in the micrometer range were successfully produced using SF-PEO blends, SF-HFIP, and PEO-Aq. The fiber thickness ranged from 0.71 ± 0.17 μm for fibers produced using SF-PEO 90:10 with no applied pressure to 2.10 ± 0.78 μm for fibers produced using SF-PEO 80:10 with 0.3 MPa applied pressure. FTIR confirmed the presence of SF via amide I and amide II bands in the blend fibers because of a change in structural conformation. No difference was observed in thermogravimetric properties among varying pressures and no significant difference in fiber diameters for pressures. SaOS-2 cells and hFOb cell studies demonstrated higher cell densities and greater live cells on SF-PEO blends when compared to SF-HFIP. This research demonstrates a scalable and green method of producing SF-based constructs for use in bone-tissue engineering applications.

Polydopamine-Induced Multilevel Engineering of Regenerated Silk Fibroin Fiber for Photothermal Conversion

Solid photothermal materials with favorable biocompatibility and modifiable mechanical properties demonstrate obvious superiority and growing demand. In this work, polydopamine (PDA) induced functionalization of regenerated silk fibroin (RSF) fibers has satisfactory photothermal conversion ability and flexibility. Based on multilevel engineering, RSF solution containing PDA nanoparticles is wet spun to PDA-incorporating RSF (PDA@RSF) fibers, and then the fibers are coated with PDA via oxidative self-polymerization of dopamine to form PDA@RSF-PDA (PRP) fibers. During the wet spinning process, PDA is to adjust the mechanical properties of RSF by affecting its hierarchical structure. Meanwhile, coated PDA gives the PRP fibers extensive absorption of near-infrared light and sunlight, which is further fabricated into PRP fibrous membranes. The temperature of PRP fibrous membranes can be adjusted and increases to about 50 °C within 360 s under 808 nm laser irradiation with a power density of 0.6 W cm^-2 , and PRP fibrous membranes exhibit effective photothermal cytotoxicity both in vitro and in vivo. Under the simulated sunlight, the temperature of PRP fiber increases to more than 200 °C from room temperature and the material can generate 4.5 V voltage when assembled with a differential thermal battery, which means that the material also has the potential for flexible wearable electronic devices.

From Mesoscopic Functionalization of Silk Fibroin to Smart Fiber Devices for Textile Electronics and Photonics

Bombyx mori silk fibers exhibit significant potential for applications in smart textiles, such as fiber sensors, fiber actuators, optical fibers, and energy harvester. Silk fibroin (SF) from B. mori silkworm fibers can be reconstructed/functionalized at the mesoscopic scale during refolding from the solution state into fibers. This facilitates the mesoscopic functionalization by engaging functional seeds in the refolding of unfolded SF molecules. In particular, SF solutions can be self-assembled into regenerated fiber devices by artificial spinning technologies, such as wet spinning, dry spinning, microfluidic spinning, electrospinning, and direct writing. Meso-functionalization manipulates the SF property from the mesoscopic scale, transforming the original silk fibers into smart fiber devices with smart functionalities, such as sensors, actuators, optical fibers, luminous fibers, and energy harvesters. In this review, the progress of mesoscopic structural construction from SF materials to fiber electronics/photonics is comprehensively summarized, along with the spinning technologies and fiber structure characterization methods. The applications, prospects, and challenges of smart silk fibers in textile devices for wearable personalized healthcare, self-propelled exoskeletons, optical and luminous fibers, and sustainable energy harvesters are also discussed.

Spider Silk-Inspired Artificial Fibers

Spider silk is a natural polymeric fiber with high tensile strength, toughness, and has distinct thermal, optical, and biocompatible properties. The mechanical properties of spider silk are ascribed to its hierarchical structure, including primary and secondary structures of the spidroins (spider silk proteins), the nanofibril, the "core-shell", and the "nano-fishnet" structures. In addition, spider silk also exhibits remarkable properties regarding humidity/water response, water collection, light transmission, thermal conductance, and shape-memory effect. This motivates researchers to prepare artificial functional fibers mimicking spider silk. In this review, the authors summarize the study of the structure and properties of natural spider silk, and the biomimetic preparation of artificial fibers from different types of molecules and polymers by taking some examples of artificial fibers exhibiting these interesting properties. In conclusion, biomimetic studies have yielded several noteworthy findings in artificial fibers with different functions, and this review aims to provide indications for biomimetic studies of functional fibers that approach and exceed the properties of natural spider silk.

Toughening Wet-Spun Silk Fibers by Silk Nanofiber Templating

Regenerated silk fibers typically fall short of silkworm cocoon fibers in mechanical properties due to reduced fiber crystal structure and alignment. One approach to address this has been to employ inorganic materials as reinforcing agents. The present study avoids the need for synthetic additives, demonstrating the first use of exfoliated silk nanofibers to control silk solution crystallization, resulting in all-silk pseudocomposite fibers with remarkable mechanical properties. Incorporating only 0.06 wt. % silk nanofibers led to a ∼44% increase in tensile strength (over 600 MPa) and ∼33% increase in toughness (over 200 kJ/kg) compared with fibers without silk nanofibers. These remarkable properties can be attributed to nanofiber crystal seeding in conjunction with fiber draw. The crystallinity nearly doubled from ∼17% for fiber spun from pure silk solution to ∼30% for the silk nanofiber reinforced sample. The latter fiber also shows a high degree of crystal orientation with a Herman's orientation factor of 0.93, a value which approaches that of natural degummed B. mori silk cocoon fiber (0.96). This study provides a strong foundation to guide the development of simple, eco-friendly methods to spin regenerated silk with excellent properties and a hierarchical structure that mimics natural silk. This article is protected by copyright. All rights reserved.

Synergic adhesive chemistry-based fabrication of BMP-2 immobilized silk fibroin hydrogel functionalized with hybrid nanomaterial to augment osteogenic differentiation of rBMSCs for bone defect repair

Bone defect repair and tissue engineering is specifically challenging process because of the distinctive morphological and structural behaviours of natural bone with complex healing and biochemical mechanisms. In the present investigation, we designed dopamine adhesive chemistry-based fabrication of silk fibroin hydrogel (SFD) with incorporation of nano-hydroxyapatite (nHA)-graphene oxide (GO) hybrid nanofillers with well-arranged porous morphology immobilized with bone morphogenic protein-2 (BMP-2) for the effective in vitro rabbit bone marrow derived mesenchymal stem cells loading compatibility and in vivo new bone regrowth and collagen deposition ability. We have achieved bone-specific hydrogel scaffolds with upgraded structural features, mechanical properties and particularly promoted in vitro osteogenic differentiation and compatibility of rabbit bone marrow mesenchymal stem cells (rBMSCs). Structural and microscopic analyses established greater distributions of components and well-ordered and aligned porous structure of the hydrogel network. In vivo result of new bone regrowth was promisingly higher in the Bm@nHG-SFD hydrogel (85%) group as compared to the other treatment groups of nHG-SFD (77%) and nH-SFD (64%) hydrogel. Overall, we summarized that morphologically improved hydrogel material with immobilization of BMP-2 could be have more attentions for new generation bone regeneration therapies.

Novel fabrication of antibiotic containing multifunctional silk fibroin injectable hydrogel dressing to enhance bactericidal action and wound healing efficiency on burn wound: In vitro and in vivo evaluations

The development of biologically active multifunctional hydrogel wound dressings can assist effectively to wound regeneration and also has influenced multiple functions on wound injury. Herein, we designed a carbon-based composited injectable silk fibroin hydrogel as multifunctional wound dressing to provide effective anti-bacterial, cell compatibility and in vivo wound closure actions. Importantly, the fabricated injectable hydrogel exhibit sustained drug delivery properties, anti-oxidant and self-healing abilities, which confirm that composition of hydrogel is highly beneficial to tissue adhesions and burn wound regeneration ability. Frequently, designed injectable hydrogel can be injected into deep and irregular burn wound sites and would provide rapid self-healing and protection from infection environment with thoroughly filled wound area. Meanwhile, incorporated carbon nanofillers improve injectable hydrogel strength and also offer high fluid uptake to hydrogel when applied on the wound sites. In vitro MTT cytotoxicity assay on human fibroblast cell lines establish outstanding cytocompatibility of the injectable hydrogel and also have capability to support cell growth and proliferations. In vivo burn wound animal model results demonstrate that the hydrogel dressings predominantly influenced enhanced wound contraction and also promoted greater collagen deposition, granulation tissue thickness and vascularization. This investigation's outcome could open a new pathway to fabricate multifunctional biopolymeric hydrogel for quicker burn wound therapy and effectively prevents microenvironment bacterial infections.

Low-Power and Tunable-Performance Biomemristor Based on Silk Fibroin

Biomemristors have attracted significant attention because of their potential applications in logic operations, nonvolatile memory, and synaptic emulators, thus leading to the urgent need to improve memristive performance. In this work, a silk fibroin (SF)-based memristor, integrated with both low power and low operating current simultaneously, has been reported. Doping the SF with Ag and an ethanol-based post-treatment promote microcrystal formation in the bulk of the SF. This induces carrier transport along fixed, short paths and results in a low set voltage, low operating current, and high memristive stability. Such performances can greatly reduce power consumption and heat generation, beneficial for the accuracy and durability of memristor devices. The memristive mechanism of SF-based memristors with different Ag contents is the space-charge-limited conduction (SCLC) mechanism. In addition, the nonlinear transmission property of SF-based memristors suggests useful applications in bioelectronics.

Cell guidance on peptide micropatterned silk fibroin scaffolds

Guiding neuronal cell growth is desirable for neural tissue engineering but is very challenging. In this work, a self-assembling ultra-short surfactant-like peptide I₃K which possesses positively charged lysine head groups, and hydrophobic isoleucine tails, was chosen to investigate its potential for guiding neuronal cell growth. The peptides were able to self-assemble into nanofibrous structures and interact strongly with silk fibroin (SF) scaffolds, providing a niche for neural cell attachment and proliferation. SF is an excellent biomaterial for tissue engineering. However neuronal cells, such as rat PC12 cells, showed poor attachment on pure regenerated SF (RSF) scaffold surfaces. Patterning of I₃K peptide nanofibers on RSF surfaces significantly improved cellular attachment, cellular density, as well as morphology of PC12 cells. The live / dead assay confirmed that RSF and I₃K have negligible cytotoxicity against PC12 cells. Atomic force microscopy (AFM) was used to image the topography and neurite formation of PC12 cells, where results revealed that self-assembled I₃K nanofibers can support the formation of PC12 cell neurites. Immunolabelling also demonstrated that coating of I₃K nanofibers onto the RSF surfaces not only increased the percentage of cells bearing neurites but also increased the average maximum neurite length. Therefore, the peptide I₃K could be used as an alternative to poly-l-lysine for cell culture and tissue engineering applications. As micro-patterning of neural cells to guide neurite growth is important for developing nerve tissue engineering scaffolds, inkjet printing was used to pattern self-assembled I₃K peptide nanofibers on RSF surfaces for directional control of PC12 cell growth. The results demonstrated that inkjet-printed peptide micro-patterns can effectively guide the cell alignment and organization on RSF scaffold surfaces, providing great potential for nerve regeneration applications.

A conductive polymer composed of a cellulose-based flexible film and carbon nanotubes

As a natural biological material, wood has renewability, biocompatibility, biodegradability and excellent mechanical properties. This research shows a conductive polymer composed of a cellulose-based flexible film constructed from natural wood and carbon nanotubes. Part of the lignin/hemicellulose of the natural wood was removed by the deep eutectic solvent to obtain a cellulose-based flexible film with a porous structure, and then the carbon nanotubes were infiltrated into the cellulose-based flexible film by vacuum pressure impregnation treatment to obtain the final conductive polymer. This conductive polymer has high conductivity and good toughness, and shows good perception ability under a certain range of strain/stress or human activity conditions. In addition, conductive fibers can be prepared by cutting and twisting the oriented cellulose nanofibers of this conductive polymer. The above-mentioned properties of this conductive polymer provide great potential for its development in electrical-related fields.

Biomimetic Mechanically Enhanced Carbon Nanotube Fibers by Silk Fibroin Infiltration

Natural materials, such as silk, nacre, and bone, possess superior mechanical properties which are derived from their unique hierarchical structures. Individual carbon nanotubes (CNTs) are considered as one of the strongest materials. However, macroscopic CNT fibers usually have breaking strength far below that of individual CNTs. In this work, by mimicking the structure of natural silk fibers, strong and stiff CNT fibers are prepared by infiltrating silk fibroin (SF) into CNT fibers. There are abundant hydrogen bonds in SF, contributing to the enhanced interactions between neighboring CNTs. Glycerol is selected to promote the formation of β-sheet conformation in SF, leading to further enhanced strength and modulus. Remarkably, the SF infiltrated CNT fibers show breaking strength of 1023 MPa, toughness of 10.3 MJ m^-3 , and Young's modulus of 81.3 GPa, which are 250%, 132%, and 442% of the pristine CNT fibers. The structure of the SF and the interactions between CNTs and SF are studied via Fourier transformed infrared spectroscopy and molecular dynamics simulation. Mimicking the hierarchical structures of natural silk fibers and enhance the interfacial load transfer by infiltrating SF are effective for reinforcing CNT fibers, which may be useful in the design and preparation of other structural materials.

Dual-Crystallizable Silk Fibroin/Poly(L-lactic Acid) Biocomposite Films: Effect of Polymer Phases on Protein Structures in Protein-Polymer Blends

Biopolymer composites based on silk fibroin have shown widespread potential due to their brilliant applications in tissue engineering, medicine and bioelectronics. In our present work, biocomposite nanofilms with different special topologies were obtained through blending silk fibroin with crystallizable poly(L-lactic acid) (PLLA) at various mixture rates using a stirring-reflux condensation blending method. The microstructure, phase components, and miscibility of the blended films were studied through thermal analysis in combination with Fourier-transform infrared spectroscopy and Raman analysis. X-ray diffraction and scanning electron microscope were also used for advanced structural analysis. Furthermore, their conformation transition, interaction mechanism, and thermal stability were also discussed. The results showed that the hydrogen bonds and hydrophobic interactions existed between silk fibroin (SF) and PLLA polymer chains in the blended films. The secondary structures of silk fibroin and phase components of PLLA in composites vary at different ratios of silk to PLLA. The β-sheet content increased with the increase of the silk fibroin content, while the glass transition temperature was raised mainly due to the rigid amorphous phase presence in the blended system. This results in an increase in thermal stability in blended films compared to the pure silk fibroin films. This study provided detailed insights into the influence of synthetic polymer phases (crystalline, rigid amorphous, and mobile amorphous) on protein secondary structures through blending, which has direct applications on the design and fabrication of novel protein–synthetic polymer composites for the biomedical and green chemistry fields.

Silk Fibroin as a Functional Biomaterial for Tissue Engineering

Tissue engineering (TE) is the approach to combine cells with scaffold materials and appropriate growth factors to regenerate or replace damaged or degenerated tissue or organs. The scaffold material as a template for tissue formation plays the most important role in TE. Among scaffold materials, silk fibroin (SF), a natural protein with outstanding mechanical properties, biodegradability, biocompatibility, and bioresorbability has attracted significant attention for TE applications. SF is commonly dissolved into an aqueous solution and can be easily reconstructed into different material formats, including films, mats, hydrogels, and sponges via various fabrication techniques. These include spin coating, electrospinning, freeze drying, physical, and chemical crosslinking techniques. Furthermore, to facilitate fabrication of more complex SF-based scaffolds with high precision techniques including micro-patterning and bio-printing have recently been explored. This review introduces the physicochemical and mechanical properties of SF and looks into a range of SF-based scaffolds that have been recently developed. The typical TE applications of SF-based scaffolds including bone, cartilage, ligament, tendon, skin, wound healing, and tympanic membrane, will be highlighted and discussed, followed by future prospects and challenges needing to be addressed.

Spinning Regenerated Silk Fibers with Improved Toughness by Plasticizing with Low Molecular Weight Silk

Low-molecular weight (LMW) silk was utilized as a LMW silk plasticizer for regenerated silk, generating weak physical crosslinks between high-molecular weight (HMW) silk chains in the amorphous regions of a mixed solution of HMW/LMW silk. The plasticization effect of LMW silk was investigated using mechanical testing, Raman spectroscopy, and wide-angle X-ray scattering (WAXS). Small amounts (10%) of LMW silk resulted in a 19.4% enhancement in fiber extensibility and 37.8% increase in toughness. The addition of the LMW silk facilitated the movement of HMW silk chains during drawing, resulting in an increase in molecular chain orientation when compared with silk spun from 100% HMW silk solution. The best regenerated silk fibers produced in this work had an orientation factor of 0.94 and crystallinity of 47.82%, close to the values of natural degummedBombyx mori silk fiber. The approach and mechanism elucidated here can facilitate artificial silk systems with enhanced properties.

Study on the effect of graphene oxide (GO) feeding on silk properties based on segmented precise measurement

Silk is widely used in the biomedical field (e.g., surgical sutures) for its excellent mechanical properties and biocompatibility. The properties of silk can be further enhanced by a multitude of methods, including nano particle feeding, which is convenient and green. Generally, the filament length of a silkworm cocoon ranges from 1300 to 1700 m. Despite the fact that the filament size, a key factor affecting the mechanical properties of silk, varies along the length, evaluation of strengthened silk by segment and the specific distribution along the length has not been reported. Therefore, in the present study, we fed silkworms with graphene oxide-sprayed mulberry leaves and evaluated the silk properties segment by segment. The silk's strength and elongation were significantly enhanced, with more α-helical/random coils and thicker mesophase regions. Specifically, the silk from 2‰ GO-treated group had higher strength in the first 60% of the length, whereas the silk from 1‰ GO-treated group was stronger in the last 40% of the length. Notably, the silk from 1‰ GO-treated group had the highest strength and Young's modulus in the last 20% of the length, indicating that this segment is more suitable for use as a surgical suture. Our findings demonstrate that different silk segments offer a great range of desirable assets, and the feasibility to select a specific segment with the desired properties for a specific application.

Graphene oxide and electroactive reduced graphene oxide-based composite fibrous scaffolds for engineering excitable nerve tissue

This study systematically investigates the role of graphene oxide (GO) and reduced GO (rGO)/silk-based composite micro/nano-fibrous scaffolds in regulating neuronal cell behavior in vitro, given the limited comparative studies on the effects of graphene family materials on nerve regeneration. Fibrous scaffolds can mimic the architecture of the native extracellular matrix and are potential candidates for tissue engineering peripheral nerves. Silk/GO micro/nano-fibrous scaffolds were electrospun with GO loadings 1 to 10 wt.%, and optionally post-reduced in situ to explore a family of electrically conductive non-woven silk/rGO scaffolds. Conductivities up to 4 × 10^-5 S cm^-1 were recorded in the dry state, which increased up to 3 × 10^-4 S cm^-1 after hydration. Neuronoma NG108-15 cells adhered and were viable on all substrates. Enhanced metabolic activity and proliferation were observed on the GO-containing scaffolds, and these cell responses were further promoted for electroactive silk/rGO. Neurite extensions up to 100 μm were achieved by day 5, with maximum outgrowth up to ~250 μm on some of the conductive substrates. These electroactive composite fibrous scaffolds exhibit potential to enhance the neuronal cell response and could be versatile supportive substrates for neural tissue engineering applications.