Stripe-like Clay Nanotubes Patterns in Glass Capillary Tubes for Capture of Tumor Cells

Self-Standing Biohybrid Xerogels Incorporating Nanotubular Clays for Sustainable Removal of Pollutants

In this work, it is reported a scalable and systematic protocol for the preparation of xerogels based on the use of green, highly available, and low-cost materials, i.e. halloysite nanoclay and chitosan, without the need for any expensive equipment or operational/energetic demands. Starting from colloidal dispersions, rheological studies demonstrate the formation of hydrogels with zero-shear viscosities enhanced by ≈9 orders of magnitude and higher storage moduli. Hence, the corresponding self-standing xerogels are prepared by a simple solvent casting method and their properties depend on the concentration of halloysite, possessing enhanced thermal stability and outstanding mechanical performances (elastic modulus and ultimate elongation of 165 MPa and 43%, respectively). The resulting biohybrid materials can be exploited for environmental remediation. High removal efficiencies are reached for the capture of organic molecules from aqueous media and the CO2 capture from the atmosphere is also investigated. Most importantly, the presence of an inorganic skeleton within the xerogels prevents the structure from collapsing upon drying and it allows for the control over their morphology and shape. Therefore, taking advantage of the overall features, the designed xerogels offer an attractive strategy for sustainably tackling pollution and for environmental remediation in a plethora of different domains.

The Horizons of Medical Mineralogy: Structure-Bioactivity Relationship and Biomedical Applications of Halloysite Nanoclay

Medical mineralogy explores the interactions between natural minerals and living organisms such as cells, tissues, and organs and develops therapeutic and diagnostic applications in drug delivery, medical devices, and healthcare materials. Many minerals (especially clays) have been recognized for pharmacological activities and therapeutic potential. Halloysite clay (Chinese medicine name: Chishizhi), manifested as one-dimensional aluminum silicate nanotubes (halloysite nanotubes, HNTs), has gained applications in hemostasis, wound repair, gastrointestinal diseases, tissue engineering, detection and sensing, cosmetics, and daily chemicals formulations. Various biomedical applications of HNTs are derived from hollow tubular structures, high mechanical strength, good biocompatibility, bioactivity, and unique surface characteristics. This natural nanomaterial is safe, abundantly available, and may be processed with environmentally safe green chemistry methods. This review describes the structure and physicochemical properties of HNTs relative to bioactivity. We discuss surface area, porosity and surface defects, hydrophilicity, heterogeneity and charge of external and internal surfaces, as well as biosafety. The paper provides comprehensive guidance for the development of this tubule nanoclay and its advanced biomedical applications for clinical diagnosis and therapy.

Micropatterning of biologically derived surfaces with functional clay nanotubes

Micropatterning of biological surfaces performed via assembly of nano-blocks is an efficient design method for functional materials with complex organic-inorganic architecture. Halloysite clay nanotubes with high aspect ratios and empty lumens have attracted widespread interest for aligned biocompatible composite production. Here, we give our vision of advances in interfacial self-assembly techniques for these natural nanotubes. Highly ordered micropatterns of halloysite, such as coffee rings, regular strips, and concentric circles, can be obtained through high-temperature evaporation-induced self-assembly in a confined space and shear-force brush-induced orientation. Assembly of these clay nanotubes on biological surfaces, including the coating of human or animal hair, wool, and cotton, was generalized with the indication of common features. Halloysite-coated microfibers promise new approaches in cotton and hair dyeing, medical hemostasis, and flame-retardant tissue applications. An interfacial halloysite assembly on oil microdroplets (Pickering emulsion) and its core-shell structure (functionalization with quantum dots) was described in comparison with microfiber nanoclay coatings. In addition to being abundantly available in nature, halloysite is also biosafe, which makes its spontaneous surface micropatterning prospective for high-performance materials, and it is a promising technique with potential for an industrial scale-up.

Nanoparticle Assembly: From Self-Organization to Controlled Micropatterning for Enhanced Functionalities

Nanoparticles form long-range micropatterns via self-assembly or directed self-assembly with superior mechanical, electrical, optical, magnetic, chemical, and other functional properties for broad applications, such as structural supports, thermal exchangers, optoelectronics, microelectronics, and robotics. The precisely defined particle assembly at the nanoscale with simultaneously scalable patterning at the microscale is indispensable for enabling functionality and improving the performance of devices. This article provides a comprehensive review of nanoparticle assembly formed primarily via the balance of forces at the nanoscale (e.g., van der Waals, colloidal, capillary, convection, and chemical forces) and nanoparticle-template interactions (e.g., physical confinement, chemical functionalization, additive layer-upon-layer). The review commences with a general overview of nanoparticle self-assembly, with the state-of-the-art literature review and motivation. It subsequently reviews the recent progress in nanoparticle assembly without the presence of surface templates. Manufacturing techniques for surface template fabrication and their influence on nanoparticle assembly efficiency and effectiveness are then explored. The primary focus is the spatial organization and orientational preference of nanoparticles on non-templated and pre-templated surfaces in a controlled manner. Moreover, the article discusses broad applications of micropatterned surfaces, encompassing various fields. Finally, the review concludes with a summary of manufacturing methods, their limitations, and future trends in nanoparticle assembly.

Nanosheet-hydrogel composites: from preparation and fundamental properties to their promising applications

Hydrogels are an important class of soft materials with elastic and intelligent properties. Nevertheless, these traditional hydrogels usually possess poor mechanical properties and limited functions, which greatly restrict their further applications. With the rapid development of nanotechnology, there have been significant advances in the design and fabrication of functional nanocomposite hydrogels with unique properties and functions. Among various materials, nanosheets with planar topography, large specific surface areas, and versatile physicochemical properties have attracted intense research interest. Herein, this review summarises the synthesis mechanisms, fundamental properties, and promising applications of nanosheet-incorporated hydrogels. In particular, how the nanosheet structure is applied to improve the overall performance of the hydrogel in each application is emphasized. Additionally, the current challenges and prospects are briefly discussed in this area. We expect that the combination of nanosheets and hydrogels can attract more researchers' interest and bring new opportunities in the future.

Assembly of Clay Nanotubes on Cotton Fibers Mediated by Biopolymer for Robust and High-Performance Hemostatic Dressing

Uncontrollable bleeding from military conflicts, accidents, and surgical procedures is a major life-threatening factor. Rapid, safe, and convenient hemostasis is critical to the survival of bleeding patients in prehospital care. However, the peel-off of hemostats such as kaolinite sheets from the cotton fibers often poses a risk of distal thrombosis. Here, an efficient clay hemostat of halloysite nanotubes is tightly bound onto commercial cotton fibers, which is capillary mediated by biopolymer alginate with Ca²⁺ crosslinking. The robust clay nanotube dressing materials maintain high procoagulant activity after harsh water treatment, and only a few residuals of halloysite exist in the wound area. Compared with commercial hemostat QuikClot Combat gauze, halloysite-alginate-cotton composite dressing exhibits hemostatic properties both in vivo and in vitro with high safety. The hemostatic mechanism of the dressing is attributed to activating platelets, locally concentrating clotting components in the nanoclay, halloysite coagulation factors, and alginate cross-linked with Ca²⁺ . This work inspires robust self-assembly of clay nanotubes on textile fibers and offers a hemostatic material with balanced high hemostatic activity, minimal ingredient loss, and biocompatibility. The robust dressing based on halloysite tightly bounded cotton shows great potential for military, medical, and civil bleeding control with low health risks.

Architectural design of core-shell nanotube systems based on aluminosilicate clay

A nanoarchitectural approach to the design of functional nanomaterials based on natural aluminosilicate nanotubes and their catalysis, and practical applications are described in this paper. We focused on the buildup of hybrid core-shell systems with metallic or organic molecules encased in aluminosilicate walls, and nanotube templates for structured silica and zeolite preparation. The basis for such an architectural design is a unique Al₂O₃/SiO₂ dual chemistry of 50 nm diameter halloysite tubes. Their structure and site dependent properties are well combined with biocompatibility, environmental safety, and abundant availability, which makes the described functional systems scalable for industrial applications. In these organic/ceramic hetero systems, we outline drug, dye and chemical inhibitor loading inside the clay nanotubes, accomplished with their silane or amphiphile molecule surface modifications. For metal-ceramic tubule composites, we detailed the encapsulation of 2-5 nm Au, Ru, Pt, and Ag particles, Ni and Co oxides, NiMo, and quantum dots of CdZn sulfides into the lumens or their attachment at the outside surface. These metal-clay core-shell nanosystems show high catalytic efficiency with increased mechanical and temperature stabilities. The combination of halloysite nanotubes with mesoporous MCM-41 silica allowed for a synergetic enhancement of catalysis properties. Finally, we outlined the clay nanotubes' self-assembly into organized arrays with orientation and ordering similar to nematic liquid crystals, and these systems are applicable for life-related applications, such as petroleum spill bioremediation, antimicrobial protection, wound healing, and human hair coloring.

Probing Antimicrobial Halloysite/Biopolymer Composites with Electron Microscopy: Advantages and Limitations

Halloysite is a tubular clay nanomaterial of the kaolin group with a characteristic feature of oppositely charged outer and inner surfaces, allowing its selective spatial modification. The natural origin and specific properties of halloysite make it a potent material for inclusion in biopolymer composites with polysaccharides, nucleic acids and proteins. The applications of halloysite/biopolymer composites range from drug delivery and tissue engineering to food packaging and the creation of stable enzyme-based catalysts. Another important application field for the halloysite complexes with biopolymers is surface coatings resistant to formation of microbial biofilms (elaborated communities of various microorganisms attached to biotic or abiotic surfaces and embedded in an extracellular polymeric matrix). Within biofilms, the microorganisms are protected from the action of antibiotics, engendering the problem of hard-to-treat recurrent infectious diseases. The clay/biopolymer composites can be characterized by a number of methods, including dynamic light scattering, thermo gravimetric analysis, Fourier-transform infrared spectroscopy as well as a range of microscopic techniques. However, most of the above methods provide general information about a bulk sample. In contrast, the combination of electron microscopy with energy-dispersive X-ray spectroscopy allows assessment of the appearance and composition of biopolymeric coatings on individual nanotubes or the distribution of the nanotubes in biopolymeric matrices. In this review, recent contributions of electron microscopy to the studies of halloysite/biopolymer composites are reviewed along with the challenges and perspectives in the field.

DNA interfaces with dimensional materials for biomedical applications

DNA interfaces with nano, micro, and macro materials have gained widespread attention for various applications. Such interfaces exhibit distinct functions and properties not only due to the unique properties of interfacing materials but also sequence- and conformation-dependent characteristics of the DNA. Therefore, DNA interfaces with diverse dimensional materials have advanced our understanding of the interaction mechanisms and the properties of such interfaces. The unique interfacial properties of such novel materials have applications in nanotechnology, biophysics, cell biology, biosensing, and bioelectronics. The field is growing rapidly with the frequent emergence of new interfaces carrying remarkable interfacial character. In this review article, we have classified the DNA interfaces into 0D, 1D, 2D, and 3D categories based on the types of dimensional materials. We review the key efforts made in the last five years and focus on types of interfaces, interfacing mechanisms, and their state-of-the-art applications. This review will draw a general interest because of the diversity in the DNA materials science but also the unique applications that will play a cutting-edge role in biomedical and biosensing research.

Preclinical developments of natural-occurring halloysite clay nanotubes in cancer therapeutics

The natural world holds useful resources that can be exploited to design effective therapeutic approaches. Ready-to-use tubular nanoclays, such as halloysite clay nanotubes (HNTs), are widely available, cost-effective, and sustainable submicron crystalline materials that have been showing great potential towards chronic multifactorial and malignant diseases, standing out as a promising anticancer nanotherapeutic strategy. Currently, several preclinical studies have reported the application of HNTs in cancer research, diagnosis, monitoring, and therapeutics. This groundbreaking review highlights the preclinical knowledge hitherto collected concerning the application of HNTs towards cancer therapy. Despite their reproducibility issues, HNTs were used as nanoarchitectonic platforms for the delivery of conventional chemotherapeutic, natural-occurring, biopharmaceutical, and phototherapeutic anticancer agents in a wide range of in vitro and in vivo solid cancer models. Overall, in different types of cancer mice models, the intratumoral and intravenous administration of HNTs-based nanoplatforms induced tumor growth inhibition without causing significant toxic effects. Such evidence raises a relevant question: does the therapeutic benefit of the parenteral administration of HNTs in cancer outweigh their potential toxicological risk? To answer this question further long-term absorption-distribution-metabolism-excretion studies in healthy and cancer animal models need to be performed. In cancer therapeutics, HNTs are envisaged as promising platforms for cancer multi-agent therapy, enabling the combination of different therapeutic modalities. Furthermore, HNTs might constitute suitable nanotheranostic platforms. Nevertheless, to confirm the potential and safety of the application of HNTs as nanodelivery systems for cancer therapy, it is necessary to perform in-depth in vivo pharmacokinetics and pharmacodynamic studies to further the translation to clinical trials.

Chitin Nanocrystals as an Eco-friendly and Strong Anisotropic Adhesive

To solve the damage to the environment and human body caused by organic solvent adhesives in the utilization process, chitin nanocrystal (ChNC) suspension is explored as a strong anisotropic adhesive, which is an eco-friendly and water-based adhesive with high adhesive strength. ChNCs extracted from crab shells are rod-like nanoparticles with high aspect ratios, which are mainly employed as reinforcing polymer nanocomposites and biomedicine nanomaterials. ChNC suspension sandwiched between substrates forms a long-range ordered superstructure by a self-assembly process. ChNC nanoglue exhibits high anisotropy adhesion strength, i.e., an in-plane shear strength (5.26 MPa) and an out-of-plane shear strength (0.46 MPa) for glass substrates. Moreover, the ChNC nanoglue is suitable to many substrates, such as glass, plastic, wood, metal, paper, etc. The ChNC nanoglue shows high biocompatibility toward the fibroblast cell and rat skin, proving their excellent biosafety. As an eco-friendly and high-performance adhesive, ChNC nanoglue shows promising applications in daily life and industrial fields.

Pickering Emulsions Based on Wax and Halloysite Nanotubes: An Ecofriendly Protocol for the Treatment of Archeological Woods

A novel green protocol for the consolidation and protection of waterlogged archeological woods with wax microparticles has been designed. First, we focused on the development of halloysite nanotubes (HNTs) based Pickering emulsions using wax as the inner phase of the oil-in-water droplets. The optimization of the preparation strategy was supported by both optical microscopy and scanning electron microscopy, which allowed us to show the morphological features of the prepared hybrid systems and their structural properties, i.e., the distribution of the clay at the interface. Also, the dependence of the overall dimensions of the prepared systems on the halloysite content was demonstrated. Microdifferential scanning calorimetry (μ-DSC) was conducted in order to assess whether the thermal properties of the wax are affected after its interaction with HNTs. Then, the Pickering emulsions were employed for the treatment of waterlogged wooden samples. Compared to the archeological woods treated with pure wax, the addition of nanotubes induced a remarkable improvement in the mechanical performance in terms of stiffness and flexural strength. The proposed protocol is environmentally friendly since water is the only solvent used throughout the entire procedure, even if wax is vehiculated into the pores at room temperature. As a consequence, the design of wax/halloysite Pickering emulsions represents a promising strategy for the preservation of wooden artworks, and it has a great potential to be scaled up, thus becoming also exploitable for the treatments of shipwrecks of large size.

Halloysite nanotubes - the nano-bio interface

The numerous biological applications of nanoparticles in general and nano-clays in particular are rooted in understanding and harnessing their dynamic nano-bio interface. Among clays, the intrinsically-mesoporous halloysite nanotubes (HNTs) have emerged in recent years as promising nanomaterials. The diverse interactions of these nanotubes with living cells, encompassing electrostatic, van der Waals, and ion exchange, along with cellular response, are crucial in determining the behaviour of HNTs in biological systems. Thus, rational engineering of the nanotube properties allows for vast applications ranging from bacteria encapsulation for bioremediation, through algae flocculation for aquaculture, to intracellular drug delivery. This review summarizes the many aspects of the nano-bio interface of HNTs with different cell types (bacteria, algae and fungi, and mammalian cells), highlighting biocompatibility/bio-adverse properties, interaction mechanisms, and the latest cutting-edge technologies.

Facile Fabrication of Natural Polyelectrolyte-Nanoclay Composites: Halloysite Nanotubes, Nucleotides and DNA Study

Complexation of biopolymers with halloysite nanotubes (HNTs) can greatly affect their applicability as materials building blocks. Here we have performed a systematic investigation of fabrication of halloysite nanotubes complexes with nucleotides and genomic DNA. The binding of DNA and various nucleotide species (polyAU, UMP Na₂, ADP Na₃, dATP Na, AMP, uridine, ATP Mg) by halloysite nanotubes was tested using UV-spectroscopy. The study revealed that binding of different nucleotides to the nanoclay varied but was low both in the presence and absence of MgCl₂, while MgCl₂ facilitated significantly the binding of longer molecules such as DNA and polyAU. Modification of the nanotubes with DNA and nucleotide species was further confirmed by measurements of ζ-potentials. DNA-Mg-modified nanotubes were characterized using transmission electron (TEM), atomic force (AFM) and hyperspectral microscopies. Thermogravimetric analysis corroborated the sorption of DNA by the nanotubes, and the presence of DNA on the nanotube surface was indicated by changes in the surface adhesion force measured by AFM. DNA bound by halloysite in the presence of MgCl₂ could be partially released after addition of phosphate buffered saline. DNA binding and release from halloysite nanotubes was tested in the range of MgCl₂ concentrations (10–100 mM). Even low MgCl₂ concentrations significantly increased DNA sorption to halloysite, and the binding was leveled off at about 60 mM. DNA-Mg-modified halloysite nanotubes were used for obtaining a regular pattern on a glass surface by evaporation induced self-assembly process. The obtained spiral-like pattern was highly stable and resisted dissolution after water addition. Our results encompassing modification of non-toxic clay nanotubes with a natural polyanion DNA will find applications for construction of gene delivery vehicles and for halloysite self-assembly on various surfaces (such as skin or hair).

Kaolinite group minerals: Applications in cancer diagnosis and treatment

The clay minerals are characterized as important minerals due to their specific properties. One of the most important groups of the clay minerals is the kaolinite's group minerals due to their morphology, availability and range of potential applications. Halloysite and kaolinite are investigated here for their pharmaceutical applications and especially for their potential in cancer treatment. This review study is focusing on the potential applications of the kaolinite's group minerals in cancer diagnosis and monitoring, cancer treatment, the avoidance of metastasis, and the relief of cancer pains. Anticancer drug-loaded formulations based on these minerals show high potential for the treatment of various types of cancer as they have been shown to exhibit high anticancer activity in cancer cell lines and cancer animal models, high biocompatibility, low side effects, and high drug bioavailability.

Evolution of concentration and phase structure of colloidal suspensions in a two-ends-open tube during drying process

We investigated the evolution of concentration and phase structure of colloidal suspensions in a two-ends-open tube during drying process. The volume fraction and crystal structure of suspension in the capillary tube were determined by reflection spectrometer during drying process. Our experimental results show: (a) evaporation takes place in two directions of the tube, though much stronger in one direction than the other; (b) during drying process, colloidal suspension column along the tube can be divided into four regions, namely, the close packed region, concentrated region, initial concentration region and dilution region. A new model describing the evolution of concentration profile was proposed and the calculated results based on the model are in good agreement with the experimental ones. According to solute conservation, we also present a simple way to estimate the concentration of close packed region.

Halloysite Nanotubes: Interfacial Properties and Applications in Cultural Heritage

The peculiar surfaces of halloysite nanotubes and their biocompatibility are attracting the interest of researchers based on the wide range of attainable applications. The large aspect ratio of this nanotubular material ensures promising properties as a reinforcing agent in polymeric matrixes, such as cellulose and its derivatives, that entail strengthening due to, for instance, aging-induced degradation. The halloysite cavity has a suitable size for hosting a large variety of active species such as deacidifying (calcium hydroxide) and flame retardant agents (fluorinated surfactants) for a controlled and sustained release relevant to the conservation of cultural heritage. Additionally, anionic surfactants can be selectively adsorbed at the inner surface generating inorganic micelles able to solubilize hydrophobic species in a controlled cleaning protocol. We briefly discuss how the natural halloysite nanotubes can be supportive in various conservation processes of cultural heritage and present an outlook for future perspectives.

CoFe2O4@HNTs/AuNPs Substrate for Rapid Magnetic Solid-Phase Extraction and Efficient SERS Detection of Complex Samples All-in-One

Fast and accurate practical sample detection is a great challenge in on-site detection. Herein, we developed a CoFe₂O₄@HNTs/AuNPs substrate for rapid and efficient magnetic solid-phase extraction (MSPE) surface-enhanced Raman scattering (SERS) detection of aromatic amines and nitrofuran in real samples all-in-one. Magnetic CoFe₂O₄ beads filled inside halloysite nanotubes (HNTs) can avoid aggregation of particles, endow the substrate with the rapid magnetic separation ability to simplify the pretreatment procedure, and reduce complex matrix interference. Meanwhile, outer surface AuNPs can generate electromagnetic enhancement and hot spots to amplify Raman signals of target molecules enriched/concentrated by HNTs. The CoFe₂O₄@HNTs/AuNPs substrate exhibited excellent SERS activity (high sensitivity, good reproducibility, and repeatability), pH stability (3.0-11.0), and good MSPE ability (fast magnetic enrichment/separation ability within 5 min). The CoFe₂O₄@HNTs/AuNPs MSPE SERS substrate can be applied for the determination of 4,4'-thioaniline and nitrofurantoin with a linear range of 0.054-21.7 mg/L and 0.05-1.0 mg/L, and the limits of detection were down to 0.026 mg/L and 0.014 mg/L, respectively. Furthermore, the enhancement factor (EF) of the substrate to 4,4'-thioaniline is up to 2.7 × 10⁷. Besides, the substrate can realize practical SERS determination of trace 4,4-thioaniline in cosmetics and nitrofurantoin in fish feed and aquatic samples. The recoveries were varied from 71.6% to 103.6% for 4,4-thioaniline in hair dyes and 81.9% to 116.3% for nitrofurantoin in fish feed and aquatic samples, respectively. Such a robust and efficient MSPE SERS substrate possesses great potential in rapid detection (within 15 min) for a practical sample, and it also provides a methodology for the preparation of other HNTs-based composites.

Lithography-Free Route to Hierarchical Structuring of High-χ Block Copolymers on a Gradient Patterned Surface

A chemically defined patterned surface was created via a combined process of controlled evaporative self-assembly of concentric polymer stripes and the selective surface modification of polymer brush. The former process involved physical adsorption of poly (methyl methacrylate) (PMMA) segments into silicon oxide surface, thus forming ultrathin PMMA stripes, whereas the latter process was based on the brush treatment of silicon native oxide surface using a hydroxyl-terminated polystyrene (PS-OH). The resulting alternating PMMA- and PS-rich stripes provided energetically favorable regions for self-assembly of high χ polystyrene-block-polydimethylsiloxane (PS-b-PDMS) in a simple and facile manner, dispensing the need for conventional lithography techniques. Subsequently, deep reactive ion etching and oxygen plasma treatment enabled the transition of the PDMS blocks into oxidized groove-shaped nanostructures.

Self-assembled structures of halloysite nanotubes: towards the development of high-performance biomedical materials

Halloysite nanotubes (HNTs), 1D natural tubular nanoparticles, exhibit a high aspect ratio, empty lumen, high adsorption ability, good biocompatibility, and high biosafety, which have attracted researchers' attention in applications of the biomedical area. HNTs can be readily dispersed in water due to their negatively charged surface and good hydrophilicity. The unique rod-like structure and surface properties give HNTs assembly ability into ordered hierarchical structures. In this review, the self-assembly approaches of HNTs including evaporation induced self-assembly by a "coffee-ring" mechanism, shear force induced self-assembly, and electric field force induced self-assembly were introduced. In addition, HNT self-assembly on polymeric substrates and biological substrates including hair, cells, and zebrafish embryos was discussed. These assembly processes are related to noncovalent interactions such as electrostatic, hydrogen bonding, and van der Waals forces or electron-transfer reactions. Moreover, the applications of self-assembled HNT patterns in biomedical areas such as capture of circulating tumor cells, guiding oriented cell growth, controlling cell germination, and delivery of drugs or nutrients were discussed and highlighted. Finally, challenges and future directions of assembly of HNTs were introduced. This review will inspire researchers in the design and fabrication of functional biodevices based on HNTs for tissue engineering, cancer diagnosis/therapy, and personal healthcare products.

Biomedical potential of clay nanotube formulations and their toxicity assessment

Introduction: Halloysite clay nanotubes (HNTs) are a naturally abundant and biocompatible aluminosilicate material with a structure able to encapsulate 10-20% of drugs. These features are attractive toward the clinical application in controlled drug delivery, tissue engineering and regenerative medicine. Areas covered: We describe the application of HNTs as a viable method for clinical purposes, particularly developing formulations for prophylaxis, diagnosis and therapeutics, having a special attention to these nanotubes bio-safety. HNTs may be used for pharmaceuticals, biopharmaceuticals, wound healing, bone regeneration, dental repair, hair surface engineering and biomimetic applications. Expert opinion: HNTs are a versatile, safe and biocompatible nanomaterial used for drug encapsulation for numerous clinical applications. The studies here reviewed confirm the HNTs biocompatibility, describing their low toxicity. Further developments will be made regarding the long-term efficacy of halloysite-based treatments in humans, concentrating mostly on topical applications.

Preparation of bioactive hydroxyapatite@halloysite and its effect on MC3T3-E1 osteogenic differentiation of chitosan film

Halloysite nanotubes (HNTs) are widely used in biomedical field due to their special tubular structure and high reinforcing ability, while hydroxyapatite (HAP) is generally used in tissue engineering owing to its excellent biocompatibility and biological activity. In this work, hydroxyapatite@halloysite nanotubes(HAP@HNTs) hybrid was synthesized via a facial hydrothermal reaction process. The morphology, particle size, specific surface area, and chemical composition of the hybrid were thoroughly characterized by different techniques. Rod-like HAP nanoparticles can be anchored on the outer surface of the clay tubes, which lead to a maximum increase of 4.7 m²/g in the specific surface area of HAP@HNTs over that of HNTs. HAP nanoparticles have little effect on the pores of HNTs, but diffraction peak strength of HNTs is covered by the HAP crystals. HAP@HNTs exhibit improved cytocompatibility and possess osteogenic differentiation ability towards MC3T3-E1 preosteoblasts. Chitosan/HAP@HNTs composite films were then prepared by doping of HAP@HNTs into chitosan by solution mixing. HAP@HNTs can serve as a functional phase which enhances mechanical properties of chitosan films and osteogenic differentiation of MC3T3-E1 cells. This work provides a facial synthesis routine of bioactive HAP@HNTs, which combines the osteogenic activity of HAP and the good mechanical properties of HNTs. HAP@HNTs can be used a novel bone regeneration biomaterial as local delivery systems with improved osteoinductive properties.

Interfacial Self-Assembly in Halloysite Nanotube Composites

A self-assembly of clay nanotubes in functional arrays for the production of organized organic/inorganic heterostructures is described. These 50-nm-diameter natural alumosilicate nanotubes are biocompatible. Halloysite allows for 10-20 wt % chemical/drug loading into the inner lumen, and it gives an extended release for days and months (anticorrosion, self-healing, flame-retardant, antifouling, and antibacterial composites). The structured surfaces of the oriented nanotube micropatterns enhance interactions with biological cells, improving their capture and inducing differentiation in stem cells. An encapsulation of the cells with halloysite enables control of their growth and proliferation. This approach was also developed for spill petroleum bioremediation as a synergistic process with Pickering oil emulsification. We produced 2-5-nm-diameter particles (Au, Ag, Pt, Co, Ru, Cu-Ni, Fe₃O₄, ZrO₂, and CdS) selectively inside or outside the aluminosilicate clay nanotubes. The catalytic hydrogenation of benzene and phenol, hydrogen production, impacts of the metal core-shell architecture, the metal particle size, and the seeding density were optimized for high-efficiency processes, exceeding the competitive industrial formulations. These core-shell mesocatalysts are based on a safe and cheap natural clay nanomaterial and may be scaled up for industrial applications.

Hierarchical bioresponsive nanocarriers for codelivery of curcumin and doxorubicin

Hierarchical responsive nanocarriers have received much attention for targeted delivery of chemotherapeutics. In this study, we designed pH and redox dual-stage responsive nanocarriers in the different delivery stages for co-delivery phosphorylated curcumin (p-Cur) with doxorubicin (Dox). The MSNs nanocarriers were functionalized via specific cleavable PEGylation and hydrogel coating crosslinked by disulfide bonds: MSNs as core load Dox; p-Cur encapsulated in hydrogel coating. In blood circulation, PEGylation endow the nanocarriers with long time during blood circulation; while in tumor tissue, PEG shells could be cleaved due to the pH-sensitive bond and expose the cationic hydrogel coating to improve cell uptake; while inside tumor cells, hydrogel coating could be cleaved due to the GSH and release the drugs. The results showed that the dual-responsive shells endowed the nanocarriers with tumor extracellular pH-triggered cell uptake and specific cancer cell target release. The synergistic effects of the p-Cur and Dox enhanced cellular apoptosis in Hela cells.

Halloysite Nanotube-Reinforced Ion-Incorporated Hydroxyapatite-Chitosan Composite Coating on Ti-6Al-4 V Alloy for Implant Application

To develop the corrosion resistance and improve the biological performance of a titanium implant (Ti6Al4V alloy), a series of mineral (M = Zn and Mg)-substituted hydroxyapatite (MHA), chitosan-MHA (CS-MHA), halloysite nanotube-MHA (HNT-MHA), and HNT-CS-MHA composite coatings were fabricated on the anodized titanium alloy by electrodeposition. The surface morphology and cross section of various coated composites were investigated by high-resolution scanning electron microscopy (HR-SEM). Furthermore, the functional groups and phase structure of the composite coatings were investigated by Fourier transform infrared spectroscopy (FTIR) and X-ray diffractometry (XRD). Corrosion behaviors of the composite coatings were also investigated by polarization and impedance spectroscopy (EIS). Moreover, the cell-material interaction of the composite coating was observedin vitrowith human osteoblast MG63 cells for cell proliferation at 1, 4, and 7 days of incubation. Consequently, HNT-CS-MHA-Ti may have potential applications in the field of orthopedic and dental implants.

Cell-imprinted biomimetic interface for intelligent recognition and efficient capture of CTCs

Synergistically contributing to plastic and natural antibodies, a cell-imprinted biomimetic interface exhibited high sensitivity and efficiency in CTC capture, providing novel insight into cell–biointerface interactions.

Synthesis of supramolecular gels based on electron-transfer reactions between clay nanotubes and styrene

A novel supramolecular gel is synthesized using styrene and halloysite nanotubes under ultrasound treatment, in which the nanotubes act as gelators for the styrene gel.

Tubule Nanoclay-Organic Heterostructures for Biomedical Applications

Natural halloysite nanotubes (HNTs) show unique hollow structure, high aspect ratio and adsorption ability, good biocompatibility, and low toxicity, which allow for various biomedical applications in the diagnosis and treatment of diseases. Here, advances in self-assembly of halloysite for cell capturing and bacterial proliferation, coating on biological surfaces and related drug delivery, bone regeneration, bioscaffolds, and cell labeling are summarized. The in vivo toxicity of these clay nanotubes is discussed. Halloysite allows for 10-20% drug loading and can extend the delivery time to 10-100 h. These drug-loaded nanotubes are doped into the polymer scaffolds to release the loaded drugs. The rough surfaces fabricated by self-assembly of the clay nanotubes enhance the interactions with tumor cells, and the cell capture efficacy is significantly improved. Since halloysite has no toxicity toward microorganisms, the bacteria composed within these nanotubes can be explored in oil/water emulsion for petroleum spilling bioremediation. Coating of living cells with halloysite can control the cell growth and is not harmful to their viability. Quantum dots immobilized on halloysite were employed for cell labeling and imaging. The concluding academic results combined with the abundant availability of these natural nanotubes promise halloysite applications in personal healthcare and environmental remediation.

In vitro and in vivo toxicity evaluation of halloysite nanotubes

Because of their outstanding properties, increasing numbers of research studies and emerging applications for manufacturing products are currently in progress for halloysite nanotubes (HNTs). Therefore, the impact of HNTs on the environment and human health should be taken into consideration. In order to clearly show the cell uptake of HNTs and the biodistribution of HNTs in zebrafish, HNTs are labeled with fluorescein isothiocyanate (FITC-HNTs). The cytotoxicity assays showed that the cell viabilities of human umbilical vein endothelial cells (HUVECs) and human breast adenocarcinoma (MCF-7) cells were above 60% after being treated with different concentrations of HNTs (2.5-200 μg mL^-1) for 72 h. Confocal laser scanning microscopy (CLSM) results showed the uptake of HNTs by HUVECs and MCF-7 cells. The in vivo toxicity of HNTs was then investigated in the early development of zebrafish embryos. The percent survival of zebrafish embryos and larvae showed no significant changes at different developmental stages (24, 48, 72, 96, and 120 hpf) when treated with various concentrations of HNTs (0.25-10 mg mL^-1). Besides, HNTs could promote the hatchability of zebrafish embryos and did not affect the morphological development of zebrafish at a concentration of ≤25 mg mL^-1. HNTs could also be ingested by zebrafish larvae and accumulated predominantly in the gastrointestinal tract. The fluorescence intensity of FITC-HNTs decreased gradually with time, which suggested that HNTs could be excreted by zebrafish larvae through the gastrointestinal metabolism. Therefore, it can be concluded that HNTs are relatively biocompatible nanomaterials, which can be utilized in many fields.

Chemical modification of halloysite nanotubes for controlled loading and release

Clay minerals have been used for medical purposes from ancient times. Among them, the halloysite nanotube, an aluminosilicate of the kaolin group, is an emerging nanomaterial which possesses peculiar chemical characteristics. By means of suitable modifications, such as supramolecular functionalization or covalent modifications, it is possible to obtain novel nanomaterials with tunable properties for several applications. In this context the covalent grafting of suitable organic moieties on the external surface or in the halloysite lumen has been exploited to improve the loading and release of several biologically active molecules. The resulting hybrid nanomaterials have been applied as drug carrier and delivery systems, as fillers for hydrogels, in tissue regeneration and in the gene delivery field. Furthermore the loading and release of specific molecules have been also investigated for environmental purposes. This review summarizes the main developments in the halloysite modifications in the last 20 years with a particular attention to the development in the past two years.

Nanohydrogel Formation within the Halloysite Lumen for Triggered and Sustained Release

An easy strategy to obtain nanohydrogels within the halloysite nanotube (HNTs) lumen was investigated. Inorganic reverse micelles based on HNTs and hexadecyltrimethylammonium bromides were dispersed in chloroform, and the hydrophilic cavity was used as a nanoreactor to confine the gel formation based on alginate cross-linked by calcium ions. Spectroscopy and electron microscopy experiments proved the confinement of the polymer into the HNT lumen and the formation of calcium-mediated networks. Biological tests proved the biocompatibility of the hybrid hydrogel. The nanogel in HNTs was suitable for drug loading and sustained release with the opportunity of triggered burst release by chemical stimuli. Here, we propose a new strategy based on inorganic reverse micelles for nanohydrogel formation, which are suitable for industrial and biological applications as well as for selective and triggered adsorption and/or release.

Directed Self-Assembly of Dipeptide Single Crystal in a Capillary

Controlled growth of one-dimensional nanostructures is playing a key role in creating types of materials for functional devices. Here, we report procedures for controlled assembly of the dipeptide diphenylalanine (FF) into aligned and ultralong single crystals in a capillary. With the evaporation of solvent, nucleation of the crystal occurred in the confined region, and the crystal grew continuously with a supply of molecules from the concentration gradient system inside the capillary. Based on the "Knudsen regime", an ultralong aligned individual FF single crystal possessing an active optical waveguide property at macroscopic length scale could be obtained. Moreover, capillary is also an effective microdevice to investigate the disassembly process of the FF single crystals. This strategy has potentials to broaden the range of applications of aligned organic nanomaterials.

Halloysite Nanotube-Modified Plasmonic Interface for Highly Sensitive Refractive Index Sensing

We propose and demonstrate a novel strategy to modify the plasmonic interface by using a thin layer of halloysite nanotubes (HNTs). The modified surface plasmon resonance (SPR) sensor achieves a greatly improved sensitivity because the large surface area and high refractive index of the HNTs layer significantly increase the probing electric field intensity and hence the measurement sensitivity. More significantly, the thickness of the HNTs layer can be tailored by spraying different concentrations of HNTs ethanol suspension. The proposed sensors show significant superiority in terms of the highest sensitivity (10431 nm/RIU) and the enhancement fold (5.6-folds) over those reported previously. Additionally, the proposed approach is a chemical-free and environment-friendly modification method for the sensor interface, without additional chemical or biological amplification steps (no toxic solvents are used). These unique features make the proposed HNTs-SPR biosensor a simple, biocompatible, and low-cost platform for the trace-level detection of biochemical species in a rapid, sensitive, and nondestructive manner.

Halloysite Nanotubes for Cleaning, Consolidation and Protection

Herein, we report our recent research concerning the development of halloysite based protocols for cleaning, consolidation and protection purposes. Surface modification of halloysite cavity by anionic surfactants was explored to fabricate inorganic micelles able to solubilize hydrophobic contaminants. Hybrid dispersions based on halloysite and ecocompatible polymers were tested as consolidants for paper and waterlogged archaeological woods. Encapsulation of deacidifying and flame retardant agents within the halloysite lumen was conducted with aim to obtain nanofiller with a long-term protection ability. The results prove the suitability and versatility of halloysite nanotubes, which are perspective inorganic nanoparticles within materials science, remedation and conservation of cultural heritage fields.

Synthesis and evaluation of properties of N,N-bis(perfluorooctyl)imine acetate sodium as a gas-wetting alteration agent

A gas-wetting alteration agent, N,N-bis(perfluorooctyl)imine acetate sodium, was synthesized and characterized by different methods and the wettability of a rock surface was evaluated.

Simple fabrication of rough halloysite nanotubes coatings by thermal spraying for high performance tumor cells capture

Here, we reported a fast, low-cost, and effective fabrication method of large-area and rough halloysite nanotubes (HNTs) coatings by thermal spraying of HNTs ethanol dispersions. A uniform HNTs coating with high transparence is achieved with tailorable surface roughness and thickness. Compared with normal cells, the tumor cells can be captured effectively with high capture yield by the HNTs coatings (expect HeLa cells), which is attributed to the enhanced topographic interactions between HNTs coating and cancer cells. HNTs coating formed from 2.5% ethanol dispersions shows the highest tumor cells capture yeild (90%), which is related to the appropriate roughness and anti-EpCAM conjugation. The capture yield of HNTs coating towards MCF-7 cells can be further improved to 93% within 2h under dynamic shear using a peristaltic pump. The capture yield increases with the incubation time, and the flow rate with 1.25mL/min leads to the maximum capture yield. The HNTs coatings are also effective for capture of tumor cells spiked in artificial blood samples and blood samples from patients with metastatic breast cancer. More than 90% targeted MCF-7 cells and very small amounts of white blood cells are captured by the anti-EpCAM conjugated HNTs coatings from a blood sample. HNTs are further loaded anticancer drug doxorubicin (DOX) and then thermally sprayed into coatings. The MCF-7 cells captured on DOX loaded HNTs coating display significant membrane rupture characteristic and only 3% cell viability after 16h. The high capture efficiency of tumor cells by HNTs coating fabricated by the thermal spraying method makes them show promising applications in clinical circulating tumor cells capture for early diagnosis and monitoring of cancer patients. The high killing ability of the DOX loaded HNTs coating can also be designed as an implantable therapeutic device for preventing tumor metastasis.

EFFECT OF FILLER TYPE AND CONTENT ON PHYSICAL AND MECHANICAL PROPERTIES OF NR/SBR NANOCOMPOSITE BLEND

The effect of type and content of nanofiller on the cure behavior, cure characteristics, and mechanical and dynamic mechanical thermal properties of the vulcanized SBR/NR (30/70) blend nanocomposites containing carbon black were investigated. Halloysite nanotube (HNT) and calcium carbonate (CaCO3) nanoparticles were used as reinforcing agents at different levels ranging from 0 to 5 phr. Two nanofillers affected the cure characteristics of the blended vulcanizates in opposite ways. While the gradual incorporation of HNT into the elastomer blend shortened the scorch time along with an increase in the effective torque of resulting nanocomposite compared to the unfilled blend, the progressive addition of CaCO3 into the blend monotonically prolonged the scorch time in conjunction with a decrease in the effective torque of vulcanizate sample. Mechanical tests showed enhanced elastic modulus and tensile strength of HNT-filled nanocomposites as the HNT content was increased. Nanocomposites reinforced with HNT exhibited significantly higher extensibility than the unfilled blend. In the case of CaCO3-filled nanocomposites, the elastic modulus and ultimate strength decreased upon the addition of CaCO3 nanoparticles, whereas the strain at break showed a substantial increase compared to unfilled compound. Dynamic mechanical thermal analysis results revealed a monotonic shift of damping peak's temperature toward higher temperatures with HNT loading in HNT-filled vulcanizate nanocomposites. For CaCO3-filled nanocomposites, the damping peak's temperature shifted to higher temperatures at first and then shifted back to lower temperatures at higher loadings of CaCO3. The damping peak's intensity of the CaCO3-filled nanocomposites was considerably higher than the unfilled blend, indicating higher damping capability in these systems.

Smart H2O2-Responsive Drug Delivery System Made by Halloysite Nanotubes and Carbohydrate Polymers

A novel chemical hydrogel was facilely achieved by coupling 1,4-phenylenebisdiboronic acid modified halloysite nanotubes (HNTs-BO) with compressible starch. The modified halloysite nanotubes (HNTs) and prepared hydrogel were characterized by solid-state nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and transmission electron microscope (TEM). The linkage of B-C in the hydrogel can be degraded into B-OH and C-OH units in the presence of H₂O₂ and result in the degradation of the chemical hydrogel. Pentoxifylline was loaded into the lumen of the HNTs-BO, and then gave the pentoxifylline-loaded hydrogel. The drug release profile shows that it was no more than 7% dissolved when using phosphate buffer solution (PBS) as the release medium. Notably, a complete release (near 90%) can be achieved with the addition of H₂O₂ ([H₂O₂] = 1 × 10^-4 M), suggesting a high H₂O₂ responsiveness of the as-formed hydrogel. The drug release results also show that the "initial burst release" can be effectively suppressed by loading pentoxifylline inside the lumen of the HNTs rather than embedding the drug in the hydrogel network. The drug-loaded hydrogel with H₂O₂-responsive release behavior may open up a broader application in the field of biomedicine.

Investigating the Influence of Temperature on the Kaolinite-Base Synthesis of Zeolite and Urease Immobilization for the Potential Fabrication of Electrochemical Urea Biosensors

Temperature-dependent zeolite synthesis has revealed a unique surface morphology, surface area and pore size which influence the immobilization of urease on gold electrode supports for biosensor fabrication. XRD characterization has identified zeolite X (Na) at all crystallization temperatures tested. However, N₂ adsorption and desorption results showed a pore size and pore volume of zeolite X (Na) 60 °C, zeolite X (Na) 70 °C and zeolite X (Na) 90 °C to range from 1.92 nm to 2.45 nm and 0.012 cm³/g to 0.061 cm³/g, respectively, with no significant differences. The specific surface area of zeolite X (Na) at 60, 70 and 90 °C was 64 m²/g, 67 m²/g and 113 m²/g, respectively. The pore size, specific surface area and pore volumes of zeolite X (Na) 80 °C and zeolite X (Na) 100 °C were dramatically increased to 4.21 nm, 295 m²/g, 0.762 cm³/g and 4.92 nm, 389 m²/g, 0.837 cm³/g, in that order. The analytical performance of adsorbed urease on zeolite X (Na) surface was also investigated using cyclic voltammetry measurements, and the results showed distinct cathodic and anodic peaks by zeolite X (Na) 80 °C and zeolite X (Na) 100 °C. These zeolites’ molar conductance was measured as a function of urea concentration and gave an average polynomial regression fit of 0.948. The findings in this study suggest that certain physicochemical properties, such as crystallization temperature and pH, are critical parameters for improving the morphological properties of zeolites synthesized from natural sources for various biomedical applications.

Self-Assembling Halloysite Nanotubes into Concentric Ring Patterns in a Sphere-on-Flat Geometry

Highly ordered and concentric ring patterns consisting of halloysite nanotubes (HNTs) with hierarchical cholesteric architectures are prepared by evaporation-induced self-assembly in a sphere-on-flat geometry. The structure and properties of HNTs are investigated. HNTs show a perfect tubular morphology on the nanoscale with high dispersion stability in water. Upon drying the HNTs aqueous suspension in a sphere-on-flat confined space, regular concentric HNTs rings are formed on the substrate via a self-assembly process. The widths of the inner and outer rings and the spacing between the adjacent rings increase with an increase in the concentration of the HNTs suspension. The highly ordered and concentric HNTs rings show a pronounced Maltese cross-like pattern under crossed polarizers, which suggests the formation of hierarchical cholesteric architectures. Scanning electron microscopy and atomic force microscopy observations show a disclination alignment of HNTs in the ring strips, especially with a high concentration of the HNTs suspension. The patterned rough surfaces of the HNTs show low cytotoxicity and can be used as a cell-supporting scaffold. The HNTs rings can guide the growth and orientation of C2C12 myoblast cells perpendicular to the rings. This work provides a simple, repeatable, mild, and high-efficiency method for obtaining HNTs with hierarchical architectures, which show potential for a large variety of applications, for example, in vascular grafts and skin regeneration.

Bioinspired Hierarchically Structured Surfaces for Efficient Capture and Release of Circulating Tumor Cells

The development of novel bioinspired surfaces with hierarchical micro- and nanoscale topographic structures for efficient capture and release of circulating tumor cells (CTCs) is reported. The capture of CTCs, facilitated by surface-immobilized epithelial cell adhesion molecule antibodies (anti-EpCAM), was shown to be significantly enhanced in novel three-dimensional hierarchically structured surfaces that were fabricated by replicating the natural micro- and nanostructures of rose petals. Under static conditions, these hierarchical capture substrates exhibited up to 6 times higher cell capture ability at concentrations of 100 cells mL^-1 in contrast to flat anti-EpCAM-functionalized polydimethylsiloxane (PDMS) surfaces. As indicated by scanning electron microscopy (SEM) and immunofluorescent images, this enhancement can be in large part attributed to the topographical interaction between nanoscale cell surface components and nanostructures on the substrate. Similarly, the increased surface area affords a higher nominal coverage of anti-EpCAM, which increases the number of available binding sites for cell capture. By treating the substrates with the biocompatible reductant glutathione (GSH), up to 85% of the captured cells were released, which displayed over 98% cell viability after culturing on tissue culture polystyrene (TCP) for 24 h. Therefore, these bioinspired hierarchically structured and functionalized substrates can be successfully applied to capture CTCs, as well as release CTCs for subsequent analysis. These findings provide new prospects for designing cell-material interfaces for advanced cell-based biomedical studies in the future.

Large-area assembly of halloysite nanotubes for enhancing the capture of tumor cells

Here, polystyrene sulfonate sodium (PSS) modified Halloysite nanotubes (HNTs) were self-assembled into a patterned coating on a glass substrate with ordered nanotube arrays in a slit-like confined space. The microstructure of the formed patterned HNTs coating was investigated. The formed strips are more regular and almost parallel to each other with an increase in HNTs concentration. The HNTs coating formed from the 2% PSS-HNTs dispersion has the maximum nanotube alignment degree. The patterned HNTs coating was employed to capture tumor cells. The tumor cells can be captured by the HNTs coating effectively compared with a smooth glass surface due to the enhanced topographic interactions between the HNTs coating and cancer cells. The HNTs coating prepared from the 2% PSS-HNTs dispersion has the highest capture yield which is due to the ordered nanotube arrangement and the appropriate surface roughness. The HNTs coating was further conjugated with anti-EpCAM, which leads to the capture yield of MCF-7 cells reaching 92% within 3 h. The HNTs coating can capture 8 MCF-7 cells from 1 mL artificial blood samples spiked with 10 MCF-7 cells, showing the promising applications of HNTs in clinical circulating tumor cell capture for early diagnosis and monitoring of cancer patients.