Tailoring Supramolecular Nanofibers for Air Filtration Applications

Ultrathin, ultralight dual-scale fibrous networks with high-infrared transmittance for high-performance, comfortable and sustainable PM0.3 filter

Highly permeable particulate matter (PM) can carry various bacteria, viruses and toxics and pose a serious threat to public health. Nevertheless, current respirators typically sacrifice their thickness and base weight for high-performance filtration, which inevitably causes wearing discomfort and significant consumption of raw materials. Here, we show a facile yet massive splitting eletrospinning strategy to prepare an ultrathin, ultralight and radiative cooling dual-scale fiber membrane with about 80% infrared transmittance for high-protective, comfortable and sustainable air filter. By tailoring antibacterial surfactant-triggered splitting of charged jets, the dual-scale fibrous filter consisting of continuous nanofibers (44 ± 12 nm) and submicron-fibers (159 ± 32 nm) is formed. It presents ultralow thickness (1.49 μm) and base weight (0.57 g m-2) but superior protective performances (about 99.95% PM0.3 removal, durable antibacterial ability) and wearing comfort of low air resistance, high heat dissipation and moisture permeability. Moreover, the ultralight filter can save over 97% polymers than commercial N95 respirator, enabling itself to be sustainable and economical. This work paves the way for designing advanced and sustainable protective materials.

Advances in Biomedical Applications of Solution Blow Spinning

In recent years, Solution Blow Spinning (SBS) has emerged as a new technology for the production of polymeric, nanocomposite, and ceramic materials in the form of nano and microfibers, with similar features to those achieved by other procedures. The advantages of SBS over other spinning methods are the fast generation of fibers and the simplicity of the experimental setup that opens up the possibility of their on-site production. While producing a large number of nanofibers in a short time is a crucial factor in large-scale manufacturing, in situ generation, for example, in the form of sprayable, multifunctional dressings, capable of releasing embedded active agents on wounded tissue, or their use in operating rooms to prevent hemostasis during surgical interventions, open a wide range of possibilities. The interest in this spinning technology is evident from the growing number of patents issued and articles published over the last few years. Our focus in this review is on the biomedicine-oriented applications of SBS for the production of nanofibers based on the collection of the most relevant scientific papers published to date. Drug delivery, 3D culturing, regenerative medicine, and fabrication of biosensors are some of the areas in which SBS has been explored, most frequently at the proof-of-concept level. The promising results obtained demonstrate the potential of this technology in the biomedical and pharmaceutical fields.

OPPS Fibers with High Temperature Resistance and Excellent Antioxidant Properties by an Oxidation Method

Polyphenylene sulfide (PPS) fiber products have been widely used for separation and filtration in harsh environments due to their excellent chemical resistance and relatively economical price. However, the poor temperature and weak oxidation resistance of PPS significantly shorten its service life under high temperature and strong oxidation environments. Herein, we report a type of oxidation-modified PPS (OPPS) fibers with excellent high temperature and oxidation resistance. This is achieved by oxidizing the thioether sulfide groups in PPS molecular chains into sulfoxide and sulfone groups and cross-linking the intermolecular chains. Both experiments and density functional theory (DFT) calculations indicate that hypochlorous acid (HClO) molecules can rapidly oxidize the PPS fiber surface. In addition, molecular dynamics (MD) simulations prove that there are strong hydrogen bonds and van der Waals interactions between HClO molecules and OPPS molecular chains, which promote the penetration of HClO molecules into the interior of the fiber to complete the layer-by-layer oxidation. The prepared OPPS-20 fibers exhibit excellent structural stability under high temperature and strong oxidant environments. Impressively, the OPPS-20 nonwoven filter still exhibits a high dust filtration efficiency of 99.95% after aging at 320 °C for 12 h, and the corresponding pressure drop is 24 Pa. In addition, the OPPS-20 nonwoven filter also maintains excellent filtration performance after aging in 60% HNO3 solution for 12 h, and the filtration efficiency and pressure drop are 99.96% and 29 Pa, respectively. This work demonstrates that the novel OPPS fibers have excellent application prospects in the field of separation and filtration in harsh environments.

Functional Mesostructured Electrospun Polymer Nonwovens with Supramolecular Nanofibers

Functional, hierarchically mesostructured nonwovens are of fundamental importance because complex fiber morphologies increase the active surface area and functionality allowing for the effective immobilization of metal nanoparticles. Such complex functional fiber morphologies clearly widen the property profile and enable the preparation of more efficient and selective filter media. Here, we demonstrate the realization of hierarchically mesostructured nonwovens with barbed wire-like morphology by combining electrospun polystyrene fibers, decorated with patchy worm-like micelles, with solution-processed supramolecular short fibers composed of 1,3,5-benzenetricarboxamides with peripheral N,N-diisopropylaminoethyl substituents. The worm-like micelles with a patchy microphase-separated corona were prepared by crystallization-driven self-assembly of a polyethylene based triblock terpolymer and deposited on top of the polystyrene fibers by coaxial electrospinning. The micelles were designed in a way that their patches promote the directed self-assembly of the 1,3,5-benzenetricarboxamide and the fixation of the supramolecular nanofibers on the supporting polystyrene fibers. Functionality of the mesostructured nonwoven is provided by the peripheral N,N-diisopropylaminoethyl substituents of the 1,3,5-benzenetricarboxamide and proven by the effective immobilization of individual palladium nanoparticles on the supramolecular nanofibers. The preparation of hierarchically mesostructured nonwovens and their shown functionality demonstrate that such systems are attractive candidates to be used for example in filtration, selective separation and heterogenous catalysis. This article is protected by copyright. All rights reserved.

A Hierarchical Structure of Flower-Like Zinc Oxide and Poly(Vinyl Alcohol-co-Ethylene) Nanofiber Hybrid Membranes for High-Performance Air Filters

In this article, we reported a hierarchical structure of flower-like zinc oxide (ZnO) and poly(vinyl alcohol-co-ethylene) (PVA-co-PE) nanofiber (ZnO@NF) hybrid membranes for high-performance air filters. Monodispersed flower-like ZnO superstructures were fabricated using a template-free and surfactant-free hydrothermal method, and PVA-co-PE nanofiber yarns were prepared using a melt extrusion phase separation approach. The PVA-co-PE nanofiber yarns were subjected to high-speed shearing in a mixed aqueous solution of isopropanol and water to obtain a stably dispersed nanofiber suspension. The ZnO@NF hybrid air filter was obtained by coating the mixture of flower-like ZnO superstructures and the PVA-co-PE nanofiber suspension on the surface of the polypropylene (PP) meltblown nonwoven with the electret charge eliminated. The filtration efficiency of the ZnO@NF hybrid air filter increases with increasing loading amount of the flower-like ZnO superstructures, while the pressure drop decreases. The flower-like ZnO superstructures were incorporated into the nanofiber-interconnected networks, which significantly reduces the pressure drop of the pure PVA-co-PE nanofiber air filter. The filtration efficiency of the ZnO@NF hybrid air filter is much higher than that of PP meltblown nonwoven with eliminated electret charge, solving the hidden problem of electret charge dissipation during the protection process. It is demonstrated that these nanofiber hybrid air filters have great application potential in some special areas such as high-temperature and high-humidity environments.

Stable Mesoscale Nonwovens of Electrospun Polyacrylonitrile and Interpenetrating Supramolecular 1,3,5-Benzenetrisamide Fibers as Efficient Carriers for Gold Nanoparticles

The immobilization of metal nanoparticles without agglomeration and leaching within composite nonwovens is often challenging and of great importance, for example, for catalytic applications. In this study, we prepared composite nonwovens based on electrospun polyacrylonitrile (PAN) short fibers and supramolecular terpyridine-functionalized benzene-1,3,5-tricarboxamide (BTA1) nanofibers by a sheet-forming wet-laid process. The formation of an interpenetrating and entangled network of supramolecular BTA1 nanofibers and PAN short fibers results in mechanically stable mesoscale nonwovens. Because of the peripheral terpyridine substituents of the BTA1, nonaggregated gold nanoparticles (AuNPs) could be immobilized efficiently in the composite nonwovens. The functionality of the resulting AuNPs-loaded composite nonwovens was verified by catalytic reduction of 4-nitrophenol to 4-aminophenol as a standard model reaction. The AuNPs-loaded PAN/BTA1 composite nonwovens showed high catalytic activity, reusability, and excellent stability.

Self-Assembled Nanorods of Phenylboronic Acid Functionalized Pyrene for In Situ Two-Photon Imaging of Cell Surface Sialic Acids and Photodynamic Therapy

Sialic acid (SA) plays important roles in various biological and pathological processes. Methods for monitoring and detection of SA are of great significance in terms of fundamental research, cancer diagnostics, and therapeutics, which are still limited until now. Here, a phenylboronic acid (PBA)-functionalized pyrene derivative, 4-(4-(pyren-1-yl)butyramido)phenylboronic acid (Py-PBA), was synthesized and used as a building block for self-assembling into hydrophilic nanorods. The Py-PBA nanorods (Py-PBA NRs) featured highly specific and efficient imaging of SA on living cells with the advantages of excellent fluorescence stability, good biocompatibility, and unique two-photon fluorescence properties. Meanwhile, the assembled Py-PBA NRs could efficiently generate ¹O₂ under two-photon irradiation, making it an excellent candidate for photodynamic therapy. This nanoplatform realized in situ recognition and two-photon imaging of SA on the cell surface as well as effective cancer cell therapy, providing a potential method for simple and selective analysis of SA in living cells and a new prospect for image-guided therapy.

Supramolecular microtubes based on 1,3,5-benzenetricarboxamides prepared by self-assembly upon heating

A series of three 1,3,5-benzenetricarboxamides with peripheral tertiary N,N-dialkyl-ethylamino substituents with different length of the alkyl groups is reported. In particular, the N¹,N³,N⁵-tris[2-(diethylamino)-ethyl]-1,3,5-benzenetricarboxamide exhibits phase separation followed by self-assembly upon heating from aqueous solution into well-defined supramolecular fiber-like structures in the form of microtubes.

Supramolecular polymer bottlebrushes

The field of supramolecular chemistry has long been known to generate complex materials of different sizes and shapes via the self-assembly of single or multiple low molar mass building blocks. Matching the complexity found in natural assemblies, however, remains a long-term challenge considering its precision in organizing large macromolecules into well-defined nanostructures. Nevertheless, the increasing understanding of supramolecular chemistry has paved the way to several attempts in arranging synthetic macromolecules into larger ordered structures based on non-covalent forces. This review is a first attempt to summarize the developments in this field, which focus mainly on the formation of one-dimensional, linear, cylindrical aggregates in solution with pendant polymer chains - therefore coined supramolecular polymer bottlebrushes in accordance with their covalent equivalents. Distinguishing by the different supramolecular driving forces, we first describe systems based on π-π interactions, which comprise, among others, the well-known perylene motif, but also the early attempts using cyclophanes. However, the majority of reported supramolecular polymer bottlebrushes are formed by hydrogen bonds as they can for example be found in linear and cyclic peptides, as well as so called sticker molecules containing multiple urea groups. Besides this overview on the reported motifs and their impact on the resulting morphology of the polymer nanostructures, we finally highlight the potential benefits of such non-covalent interactions and refer to promising future directions of this still mostly unrecognized field of supramolecular research.

High-performance particulate matter including nanoscale particle removal by a self-powered air filter

Particulate matter (PM) pollutants, including nanoscale particles (NPs), have been considered serious threats to public health. In this work, a self-powered air filter that can be used in high-efficiency removal of PM, including NPs, is presented. An ionic liquid-polymer (ILP) composite is irregularly distributed onto a sponge network to form an ILP@MF filter. Enabled by its unique electrochemical properties, the ILP@MF filter can remove PM_2.5 and PM₁₀ with high efficiencies of 99.59% and 99.75%, respectively, after applying a low voltage. More importantly, the charged ILP@MF filter realizes a superior removal for NPs with an efficiency of 93.77%. A micro-button lithium cell or silicon-based solar panel is employed as a power supply platform to fabricate a portable and self-powered face mask, which exhibits excellent efficacy in particulate removal compared to commercial masks. This work shows a great promise for high-performance purification devices and facile mask production to remove particulate pollutants.

Fabrication of silk fibroin/poly(lactic-co-glycolic acid)/graphene oxide microfiber mat via electrospinning for protective fabric

In this study, a biodegradable silk fibroin/poly(lactic-co-glycolic acid)/graphene oxide (SF/PLGA/GO) microfiber mat was successfully fabricated via electrospinning for use in protective fabrics. The morphology of the microfiber mat was characterized by Scanning Electron Microscope (SEM). The thermal and mechanical properties, water contact angle, surface area and pore size of the microfiber mats were characterized. Due to the introduction of graphene which can interact with silk fibroin, the SF/PLGA/GO microfiber mat, compared with the silk fibroin/poly (lactic-co-glycolic acid) (SF/PLGA) microfiber mat, has higher strength, greater Young's modulus and better thermal stability which can meet the requirements of protective fabric. The microfiber mat is biodegradable because its main component is silk fibroin and PLGA. In particular, the microfiber mat has a small pore size range of 4 ∼ 10 nm in diameter, a larger surface area of 2.63 m2 g-1 and pore volume of 7.09 × 10-3 cm3 g-1. The small pore size of the mat can effectively block the particulate pollutants and pathogenic particles in the air. The larger surface area and pore volume of the mat are effective for breathability. Therefore, the fabricated SF/PLGA/GO microfiber mat has great application potentials for protective fabrics.

Hierarchical nanomaterials via biomolecular self-assembly and bioinspiration for energy and environmental applications

Bioinspired synthesis offers potential green strategies to build highly complex nanomaterials by utilizing the unique nanostructures, functions, and properties of biomolecules, in which the biomolecular recognition and self-assembly processes play important roles in tailoring the structures and functions of bioinspired materials. Further understanding of biomolecular self-assembly for inspiring the formation and assembly of nanoparticles would promote the design and fabrication of functional nanomaterials for various applications. In this review, we focus on recent advances in bioinspired synthesis and applications of hierarchical nanomaterials based on biomolecular self-assembly. We first discuss biomolecular self-assembly towards biological nanomaterials, in which the mechanisms and ways of biomolecular self-assembly as well as various self-assembled biomolecular nanostructures are demonstrated. Secondly, the bioinspired synthesis strategies including molecule-molecule interaction, molecule-material recognition, molecule-mediated nucleation and growth, and molecule-mediated reduction/oxidation are introduced and discussed. Meanwhile, typical examples and discussions on how biomolecular self-assembly inspires the formation of hierarchical hybrid nanomaterials are presented. Finally, the applications of bioinspired nanomaterials in biofuel cells, light-harvesting systems, batteries, supercapacitors, catalysis, water/air purification, and environmental monitoring are presented and discussed. We believe that this review will be very helpful for readers to understand the self-assembly of biomolecules and the biomimetic/bioinspired strategies for synthesizing hierarchical nanomaterials on the one hand, and on the other hand to design novel materials for extended applications in nanotechnology, materials science, analytical science, and biomedical engineering.

Transparent thermoplastic polyurethane air filters for efficient electrostatic capture of particulate matter pollutants

Particulate matter (PM) air pollution has been established as a significant threat to public health and a destructive factor to the climate and eco-systems. In order to eliminate the effects of PM air pollution, various air filtering strategies based on electrospun nanofibers have recently been developed. However, to date, almost none of the existing nanofibers based air filters can meet the requirements of high-performance air PM filtering, including high PM removal efficiency, low resistance to airflow, and long service life, etc. For the first time, we report a fabrication process using the electrospinning method for air filters based on thermoplastic polyurethane (TPU) nanofibers. The average diameters of TPU nanofibers are tunable from 0.14 ± 0.06 μm to 0.82 ± 0.22 μm by changing the TPU concentrations in polymeric solutions. The optimized TPU nanofibers based air filters demonstrate the attractive attributes of high PM_2.5 removal efficiency up to 98.92%, good optical transparency of ∼60%, low pressure drop of ∼10 Pa, high quality factor of 0.45 Pa^-1, and long service life under the flow rate of 200 ml min^-1, which is ground-breaking compared with the existing nanofibers based air filters. These TPU nanofibers based air filters, with the excellent filtration performance and light transmittance, will shed light on the future research of nanofibers for various filtration applications and greatly benefit the public health by reducing the effects of PM air pollution.

Bio-based and photocrosslinked electrospun antibacterial nanofibrous membranes for air filtration

Air pollution is becoming more and more severe especially in developing countries. It is urgent to seek an effective protection for the unacceptable levels of the air pollution. Up to date, the air filtration is a widely used method to protect us from the air pollution. However, most of the air filtration membranes in fabrication process is required to use harmful organic solvents. Here, we report a human friendly, multifunctional and bio-based chitosan/poly (vinyl alcohol) air filtration membrane via green electrospinning and UV-cured. This green approach avoid use hazardous organic solvents which caused the residual solvents could bring the human subprime damage. Specifically, the superhydrophobic silica nanoparticles is introduced on the nanofibers to formation of the rough surface to increase filtration efficiency. In addition, the Ag nanoparticles (NPs) are fabricated on the surface through UV reduction of AgNO₃ to achieve the aim of antibacterial treatment. The CS/PVA@SiO₂/Ag NPs membranes not only possess excellent filtration performance but efficiently antibacterial activities. As this green, multifunctional and bio-based CS/PVA@SiO₂/Ag NPs air filtration membranes have several superior features like high air filtration performance, biological compatibility and antibacterial, it has great potential application in eco-friendly air filtration materials, especially in personal air filtration materials.

Preparation of Polypropylene Micro and Nanofibers by Electrostatic-Assisted Melt Blown and Their Application

In this paper, a novel electrostatic-assisted melt blown process was reported to produce polypropylene (PP) microfibers with a diameter as fine as 600 nm. The morphology, web structure, pore size distribution, filtration efficiency, and the stress and strain behavior of the PP nonwoven fabric thus prepared were characterized. By introducing an electrostatic field into the conventional melt-blown apparatus, the average diameter of the melt-blown fibers was reduced from 1.69 to 0.96 μm with the experimental setup, and the distribution of fiber diameters was narrower, which resulted in a filter medium with smaller average pore size and improved filtration efficiency. The polymer microfibers prepared by this electrostatic-assisted melt blown method may be adapted in a continuous melt blown process for the production of filtration media used in air filters, dust masks, and so on.

Molecular modelling of supramolecular one dimensional polymers

Supramolecular polymers exemplify the need to employ several computational techniques to study processes and phenomena occuring at varied length and time scales. Electronic processes, conformational and configurational excitations of small aggregates of chromophoric molecules, solvent effects under realistic thermodynamic conditions and mesoscale morphologies are some of the challenges which demand hierarchical modelling approaches. This review focusses on one-dimensional supramolecular polymers, the mechanism of self-assembly of monomers in polar and non-polar solvents and properties they exhibit. Directions for future work are as well outlined.

Hierarchical computational modelling approaches for the study of supramolecular polymers is reviewed.

Free-Standing Polyurethane Nanofiber/Nets Air Filters for Effective PM Capture

The filtration performance and light transmittance of nanofiber air filters are restricted by their thick fiber diameter, large pore size, and substrate dependence, which can be solved by constructing substrate-free fibrous membranes with true nanoscale diameters and ultrathin thicknesses, however, it has proven to be extremely challenging. Herein, a roust approach is presented to create free-standing polyurethane (PU) nanofiber/nets air filters composed of bonded nanofibers and 2D nanonets for particular matter (PM) capture via combining electrospinning/netting technique and facile peel off process from designed substrates. This strategy causes widely distributed Steiner-tree structured nanonets with diameters of ≈20 nm and bonded scaffold nanofibers to assemble into ultrathin membranes with small pore size, high porosity, and robust mechanical strength on a large scale based on ionic liquid inspiration and surface structure optimization of receiver substrates. As a consequence, the resulting free-standing PU nanofiber/nets filters exhibit high PM_1-0.5 removal efficiency of >99.00% and PM_2.5-1 removal efficiency of >99.73%, maintaining high light transmittance of ≈70% and low pressure drop of 28 Pa; even achieve >99.97% removal efficiency with ≈40% transmittance for PM_0.3 filtration, and robust purification capacity for real smoke PM_2.5 , making them promising high-efficiency and transparent filtration materials for various filtration and separation applications.

Green electrospun and crosslinked poly(vinyl alcohol)/poly(acrylic acid) composite membranes for antibacterial effective air filtration

Air pollution has become a major environmental concern given the ever increasing levels of particulate matter (PM) and the increased in treatment-resistant bacterial and viral strains. Major efforts are therefore required into the development of air filtration and purification technology as well as novel, alternative antiviral and antibacterial treatment modalities. Here, we report an environmentally friendly method for the generation of multifunctional poly(vinyl alcohol)/poly(acrylic acid) (PVA-PAA) composite membranes via green electrospinning and thermal crosslinking. Superhydrophobic silica nanoparticles were then incorporated into the fibers resulting in a rough surface, after which AgNO₃ was introduced, resulting in the formation of Ag nanoparticles through UV reduction. The PVA-PAA-SiO₂-Ag NPs membranes were found to possess high air filtration performance (with >98% filtration efficiency for PM_2.5) as well as potent antibacterial and antiviral activities. The green synthesis approach avoids the use of hazardous organic solvents, thereby bypassing any potential toxicity concerns caused by organic solvent residues. These newly designed PVA-PAA-SiO₂ NPs-Ag NPs nanofibrous membranes with many superior features (e.g. high filtration efficiency, high tensile strength, biological compatibility, and antibacterial properties) can be applied in eco-friendly air filtration materials, in particular for personal air filtration devices.

Synthesis of Dual-Size Cellulose-Polyvinylpyrrolidone Nanofiber Composites via One-Step Electrospinning Method for High-Performance Air Filter

Dual-size nanofibers consisting of a random mixture of nano- and submicron-size nanofibers are promising structures for specific applications such as air filters because of their increased specific surface area and low pressure drop. Synthesis of dual-size nanofibers using one-step electrospinning was reported here for the first time. The formation of well-mixed nano- and submicron-size cellulose-polyvinylpyrrolidone nanofiber composites was accomplished utilizing the physical properties of TEMPO-oxidized cellulose nanofibers (i.e., high thixotropy and high magnitude of zeta potential) and tuning the charge of the polymer jet, which influences the formation and shape of Taylor cone, and Coulombic explosion. The dual-size nanofibers were then spun on the surface of a HEPA filter to obtain a multilayer air filter. Aerosol filtration measurements show that this multilayer air filter has an incredibly high performance, shown by the high quality factor (Qf), 0.117 Pa^-1, which is 10 times the Qf of commercial HEPA filters.

Surfactin-loaded polyvinyl alcohol (PVA) nanofibers alters adhesion of Listeria monocytogenes to polystyrene

Surfactin-loaded polyvinyl alcohol (PVA) nanofibers were spun using gravity electrospinning. Scanning electron microscopy (SEM) images showed that nanofibers spun with surfactin are free from bead formation and uniform in diameter. The average nanofiber diameters were decreased (273±39nm, 259±39nm and 217±33nm) with increasing levels of surfactin (0.5, 1.0 and 1.5%, w/v) into PVA (10%, w/v). The 10% (w/v) PVA had average fiber diameter of 303±33nm. Atomic force microscopy (AFM) analysis showed that fibers spun with surfactin are not smooth as PVA fibers. The surface average roughness (S_a) estimated for surfactin loaded nanofibers (0.5%: 19.0nm, 1.0%: 20.4nm and 1.5%: 20.7nm) was higher as compared with PVA (10%:15.8nm). Scanning transmission electron microscopy (STEM) showed no matrix differences between PVA and surfactin-loaded PVA nanofibers. Fourier transform infrared (FTIR) microscopy revealed uniform distribution of surfactin in PVA. Based on differential scanning calorimetry (DSC) analyses, surfactin decreased the crystallinity of PVA during spinning. No antimicrobial activity was detected against methicillin-resistant Staphylococcus aureus (MRSA) strain Xen 30, Listeria monocytogenes EDGe, Escherichia coli Xen 14, and Pseudomonas aeruginosa PA01. However, the adhesion of L. monocytogenes to polystyrene in presence of surfactin-loaded nanofibers decreased significantly (OD₅₉₅: 0.012±0.001) as compared with control (OD₅₉₅: 0.022±0.002), suggesting that these nanofibers may be used in wound dressings or in the coating of prosthetic devices to prevent biofilm formation and secondary infections.