Electrospinning of Fe/SiC Hybrid Fibers for Highly Efficient Microwave Absorption

Interface/Dipole Polarized Antibiotics-Loaded Fe3O4/PB Nanoparticles for Non-Invasive Therapy of Osteomyelitis Under Medical Microwave Irradiation

Due to their poor light penetration, photothermal therapy and photodynamic therapy are ineffective in treating deep tissue infections, such as osteomyelitis caused by Staphylococcus aureus (S. aureus). Here, a microwave (MW)-responsive magnetic targeting composite system consisting of ferric oxide (Fe3O4)/Prussian blue (PB) nanoparticles, gentamicin (Gent), and biodegradable poly(lactic-co-glycolic acid) (PLGA) is reported. The PLGA/Fe3O4/PB/Gent complex is used in combination with MW thermal therapy (MTT), MW dynamic therapy (MDT), and chemotherapy (CT) to treat acute osteomyelitis infected with S. aureus-infected. The powerful antibacterial effect of the PLGA/Fe3O4/PB/Gent is determined by the synergistic effects of heat and reactive oxygen species (ROS) generation by the Fe3O4/PB nanoparticles under MW irradiation and the effective release of Gent at the infection site via magnetic targeting. The antibacterial mechanism of the PLGA/Fe3O4/PB/Gent under MW irradiation is analyzed using bacterial transcriptome RNA sequencing. The MW heat and ROS reduce the activity of the protein transporters on the bacterial membrane, along with the transport of various ions and the acceleration of phosphate metabolism, which can lead to increased permeability of the bacterial membrane, damage the ribosome and DNA, and accompany the internal protein efflux of the bacteria, thus effectively killing the bacteria.

Simple fabrication of cobalt-nickel alloy/carbon nanocomposite fibers for tunable microwave absorption

A series of CoNi/C nanocomposite fibers with different Co and Ni ratios were successfully prepared by electrospinning and carbonization techniques for the study of electromagnetic microwave (EMW) absorbing materials. We systematically studied the influence of Co and Ni content on the microstructure, chemical composition, magnetic properties, and EMW absorption characteristics of the samples. The results showed that CoNi/C nanocomposite fibers obtained excellent EMW absorption ability through the reasonable design of the composition, and the Co/Ni ratio significantly affected the microstructure and EMW absorption performance. When the Co/Ni ratio was 1/3, the minimum reflection loss (RLmin) is -71.2 dB (2.4 mm, 13.4 GHz), and the maximum effective absorption bandwidth (EAB, RL＜-10 dB) is up to 5.9 GHz (2.2 mm, 12.1-18 GHz), covering almost the entire Ku band. This study demonstrated the enormous potential of one-dimensional structure in the field of EMW absorption. In addition, the CoNi/C nanocomposite fiber synthesized using a straightforward and low-cost method not only has excellent EMW absorption performance but also has the potential for practical application. The results of this study provide a simple and effective approach for designing high-performance EMW absorbing materials.

State-of-the-art in carbides/carbon composites for electromagnetic wave absorption

Electromagnetic wave absorbing materials (EWAMs) have made great progress in the past decades, and are playing an increasingly important role in radiation prevention and antiradar detection due to their essential attenuation toward incident EM wave. With the flourish of nanotechnology, the design of high-performance EWAMs is not just dependent on the intrinsic characteristics of single-component medium, but pays more attention to the synergistic effects from different components to generate rich loss mechanisms. Among various candidates, carbides and carbon materials are usually labeled with the features of chemical stability, low density, tunable dielectric property, and diversified morphology/microstructure, and thus the combination of carbides and carbon materials will be a promising way to acquire new EWAMs with good practical application prospects. In this review, we introduce EM loss mechanisms related to dielectric composites, and then highlight the state-of-the-art progress in carbides/carbon composites as high-performance EWAMs, including silicon carbide/carbon, MXene/carbon, molybdenum carbide/carbon, as well as some uncommon carbides/carbon composites and multicomponent composites. The critical information regarding composition optimization, structural engineering, performance reinforcement, and structure-function relationship are discussed in detail. In addition, some challenges and perspectives for the development of carbides/carbon composites are also proposed after comparing the performance of some representative composites.

Sulfur vacancy regulation and multipolarization of NixCo1S nanowires-decorated biotemplated structures to promote microwave absorption

It is a novel and practical method to use natural porous biomaterials as microwave absorber. In this study, Ni_xCo₁S nanowires (NWs)@diatomite (De) composites with one-dimensional (1D)-NWs and three-dimensional(3D)-De composites were prepared by a two-step hydrothermal method using De as template. The effective absorption bandwidth (EAB) of the composite reaches 6.16 GHz at 1.6 mm and 7.04 GHz at 4.1 mm, covering the entire Ku band, and the minimum reflection loss (RLmin) is less than -30 dB. The excellent absorption performance is mainly due to the bulk charge modulation provided by the 1D NWs and the extended microwave transmission path within the absorber, coupled with the high dielectric loss and magnetic loss of the metal-NWS after vulcanization. We present a high-value method that combines vulcanized 1D materials with abundant De to achieve the lightweight broadband efficient microwave absorption at the first time.

Phase-Transformation Nanoparticles Synchronously Boosting Mechanical and Electromagnetic Performance of SiBCN Ceramics

Precursor-derived silicoboron carbonitride ceramic (PDC-SiBCN) has attracted significant attention as an advanced electromagnetic (EM) wave-absorbing material. However, the inherent porous and brittle characteristics limit its application as a structural load component in an EM interference environment. In this study, phase-transformation HfO₂ nanoparticles were incorporated into PDC-SiBCN to reduce volume shrinkage, improve bonding interactions, and control structural defects, simultaneously boosting the plastic deformation and EM performance of brittle ceramics. The obtained HfO₂/SiBCN ceramic showed enhanced flexural strength of up to 430.1% compared with that of the pure SiBCN ceramic. Furthermore, the HfO₂/SiBCN ceramic also demonstrated excellent high-temperature EM absorption. The minimum reflection coefficient (RC_min) could reach -45.26 dB, and the effective absorption bandwidth (EAB) covered 2.80 GHz of the X band at 2.28 mm thickness at room temperature. Furthermore, the RC_min can still reach -44.83 dB, and the EAB can cover 2.4 GHz at 1.58 mm even at 1073 K. This work shows that phase-transformation nanoparticles could simultaneously improve the deformation ability and EM wave absorption properties of SiBCN ceramics. The results could guide the design and preparation of PDCs with strong carrying capacity and excellent EM absorption, even in harsh environments.

Direct Ink Writing for High-Efficiency Microwave Attenuation with Nanofibers Alignment

One-dimensional (1D) fibers have been widely used in composites reinforcement for microwave attenuation due to their outstanding mechanical and electromagnetic properties, especially in the axial direction. However, the precise control of fiber alignment in a polymer matrix remains a challenge. In this work, we successfully demonstrated the well-controlled alignment of silicon carbide nanowires (SiCNW) in a silicone matrix by using direct ink writing (DIW)-based 3D printing. It is proven that the printed multilayer material with fiber alignment could show a dramatic improvement in both reflection loss (RL) and effective attenuation bandwidth (EAB, RL < -10 dB). In particular, a uniaxial in-plane orientation is found to be the optimal alignment among other planar and also out-of-plane orientations. Benefiting from the optimized alignment, the 3D-printed SiC composite could show an EAB (∼6.4 GHz)1.6 times broader than that of the randomly mixed composite at the same thickness without alignment, associated with a minimum RL of -48 dB at 14.3 GHz. In addition, it is demonstrated that DIW could print different materials, such as SiCNW and multiwall carbon nanotube (MWCNT), in alternating layers for multiple-frequency-band attenuation benefiting from the distinct property of each material. Considering the one-step control of fiber alignment and material selectivity, DIW could play an important role in materials design for high-efficiency microwave attenuation.

Flexible Ceramic Fibers: Recent Development in Preparation and Application

Flexible ceramic fibers (FCFs) have been developed for various advanced applications due to their superior mechanical flexibility, high temperature resistance, and excellent chemical stability. In this article, we present an overview on the recent progress of FCFs in terms of materials, fabrication methods, and applications. We begin with a brief introduction to FCFs and the materials for preparation of FCFs. After that, various methods for preparation of FCFs are discussed, including centrifugal spinning, electrospinning, solution blow spinning, self-assembly, chemical vapor deposition, atomic layer deposition, and polymer conversion. Recent applications of FCFs in various fields are further illustrated in detail, including thermal insulation, air filtration, water treatment, sound absorption, electromagnetic wave absorption, battery separator, catalytic application, among others. Finally, some perspectives on the future directions and opportunities for the preparation and application of FCFs are highlighted. We envision that this review will provide readers with some meaningful guidance on the preparation of FCFs and inspire them to explore more potential applications.

Polylactic Acid Piezo-Biopolymers: Chemistry, Structural Evolution, Fabrication Methods, and Tissue Engineering Applications

Polylactide acid (PLA), as an FDA-approved biomaterial, has been widely applied due to its unique merits, such as its biocompatibility, biodegradability, and piezoelectricity. Numerous utilizations, including sensors, actuators, and bio-application-its most exciting application to promote cell migration, differentiation, growth, and protein-surface interaction-originate from the piezoelectricity effect. Since PLA exhibits piezoelectricity in both crystalline structure and an amorphous state, it is crucial to study it closely to understand the source of such a phenomenon. In this respect, in the current study, we first reviewed the methods promoting piezoelectricity. The present work is a comprehensive review that was conducted to promote the low piezoelectric constant of PLA in numerous procedures. In this respect, its chemistry and structural origins have been explored in detail. Combining any other variables to induce a specific application or to improve any PLA barriers, namely, its hydrophobicity, poor electrical conductivity, or the tuning of its mechanical properties, especially in the application of cardiovascular tissue engineering, is also discussed wherever relevant.

Hybrid metamaterial absorber for ultra-low and dual-broadband absorption

Developing high-efficiency microwave absorbers remains challenging in the broadband range, particularly in the low-frequency range containing the L band and even lower. To overcome this challenge, a hybrid metamaterial absorber comprising a conventional magnetic absorbing material and a multi-layered meta-structure predesigned with graphene films is proposed to realize wideband absorption performance starting from ultra-low frequencies (0.79-20.9 GHz and 25.1-40.0 GHz). The high absorption ability of the proposed device originates from fundamental resonance modes and their coupling. The experimental results agree well with the simulated ones, proving the effectiveness of our design method. In addition, owing to the use of low-density polymethylacrylimide foam and graphene films with outstanding mechanical properties, our design is lightweight and environmentally adaptable, which reflects its engineering value.

1D Electromagnetic-Gradient Hierarchical Carbon Microtube via Coaxial Electrospinning Design for Enhanced Microwave Absorption

1D structures have been gaining traction in the microwave absorption (MA) field benefiting from their electromagnetic (EM) anisotropy. However, there remain considerable challenges in adjusting EM properties by structural design. Herein, using the coaxial electrospinning and solvothermal method, the EM gradient has been achieved in TiO₂@Co/C@Co/Ni multilayered microtubes. From the outer layer to the inner one, the impedance matching is gradually worsened, while the EM loss capacity is continuously enhanced, facilitating both the incidence and attenuation of microwave. Besides, 1D structural anisotropy simultaneously realizes multilevel magnetic interaction and 3D conductive double network. Therefore, the 1D EM-gradient hierarchical TiO₂@Co/C@Co/Ni carbon microtube composite exhibits excellent MA performance. Its maximum reflection loss (RL) value reaches -53.99 dB at 2.0 mm and effective absorption bandwidth (EAB, RL ≤ -10 dB) is as wide as 6.0 GHz, covering most of the Ku band with only 15% filling. The unique design of 1D EM-gradient hierarchical composites promises great potential in the construction of advanced MA materials.

Binder-Free Air Electrodes for Rechargeable Zinc-Air Batteries: Recent Progress and Future Perspectives

Designing an efficient air electrode is of great significance for the performance of rechargeable zinc (Zn)-air batteries. However, the most widely used approach to fabricate an air electrode involves polymeric binders, which may increase the interface resistance and block electrocatalytic active sites, thus deteriorating the performance of the battery. Therefore, binder-free air electrodes have attracted more and more research interests in recent years. This article provides a comprehensive overview of the latest advancements in designing and fabricating binder-free air electrodes for electrically rechargeable Zn-air batteries. Beginning with the fundamentals of Zn-air batteries and recently reported bifunctional active catalysts, self-supported air electrodes for liquid-state and flexible solid-state Zn-air batteries are then discussed in detail. Finally, the conclusion and the challenges faced for binder-free air electrodes in Zn-air batteries are also highlighted.

Construction of a Cu-Sn Heterojunction Interface Derived from a Schottky Junction in Cu@Sn/rGO Composites as a Highly Efficient Dielectric Microwave Absorber

Developing high-performance dielectric absorbers, low filler loading, and a broad absorption band remains a great challenge for wireless data communication systems, household appliances, local area network, and so on. Herein, we report a facile green method to design and fabricate a copper-coated tin/reduced graphene oxide (Cu@Sn/rGO) composites with a heterojunction obtained by modifying a Schottky junction. The unique heterojunction can enable an appropriate balance between impedance and strong loss capacity. Meanwhile, it can not only promote the carrier migration but also obtain the rich interfaces. Consequently, a Cu@Sn/rGO composite with a heterojunction exhibits superior absorption intensity, far surpassing that of other absorbing materials reported. With a weight content of only 5 wt %, the maximum absorptivity reaches -49.19 dB at 6.08 GHz, and an effective absorption bandwidth (RL < -10 dB) of 13.94 GHz is achieved when the absorber's thickness ranges from 1.7 to 5.5 mm. This study provides new insights into the design and synthesis of a novel microwave absorption material with lightweight, smaller filler loading, and strong reflection loss.

Graphene-wrapped pine needle-like cobalt nanocrystals constructed by cobalt nanorods for efficient microwave absorption performance

Magnetic metal nanocrystals tend to be advanced microwave absorption substances as they possess simultaneous dielectric and magnetic losses. In this study, the metallic cobalt (Co) nanocrystals with a pine needle-like nanostructure constructed by one-dimensional Co nanorods have been successfully prepared through the polyol approach. By regulating the amount of reduced graphene oxide (rGO), rGO/Co nanocomposites with different mass ratios were acquired. Experimental results demonstrate that the rGO/Co nanocomposites display excellent microwave attenuation capacity. The minimum reflection loss value can reach −57.8 dB at 12.43 GHz with a filler loading of 20 wt% at 1.8 mm. Moreover, the effective absorption bandwidth covers the frequency range of 4.2–15.5 GHz with an integrated thickness of 1.5–4.0 mm. The main absorption mechanisms include dielectric loss caused by dipole and interfacial polarization and magnetic loss arising from ferromagnetic resonance and eddy current loss. In addition, the special nanostructure effect is also beneficial to improve the EM wave absorption performance.

Magnetic metal nanocrystals tend to be advanced microwave absorption substances as they possess simultaneous dielectric and magnetic losses.

High-efficiency and wide-bandwidth microwave absorbers based on MoS2-coated carbon fiber

Carbon fiber (CF) is a significant multifunction material, which is extensively used in aircraft because of its superb performance. However, its microwave absorption properties (MAPs) are seriously restricted as a result of the impedance mismatch issue. To address this issue, an efficient strategy is conducted by a series of CF@MoS₂ and CF@MoS₂@Fe₃O₄ composites that are fabricated by in-situ grown MoS₂ nanosheets (MoS₂-NS) and Fe₃O₄ nanoparticles (Fe₃O₄-NPs) on the surface of CF. The results of microwave absorption performance (MAP) reveal that the minimum reflection loss (RL) can reach -21.4 dB with a CF@MoS₂ composite coating thickness of 3.8 mm; the effective attenuation bandwidth (RL < -10 dB, i.e., 90% microwave energy is attenuated) is up to 10.85 GHz (7.15-18.0 GHz). From a detailed analysis, it is observed impedance mismatch is the critical limiting factor for MAPs rather than attenuation. Furthermore, for CF@MoS₂@Fe₃O₄, the MAP is strongly dependent on the level of coating of magnetic Fe₃O₄-NPs on the surface of CF@MoS₂ composites. The mechanisms underlying the superb MAP and related phenomena are investigated, opening new directions for fabricating CF-based microwave absorbers with high efficiency and wide-bandwidth. Finally, the occurrence of multi-reflection phenomena of EM waves in absorbers are critically analyzed.

Galvanic Replacement Reaction Involving Core-Shell Magnetic Chains and Orientation-Tunable Microwave Absorption Properties

Electromagnetic (EM) wave absorption materials have attracted considerable attention because of EM wave pollution caused by the proliferation of electronic communication devices. One-dimentional (1D) structural magnetic metals have potential as EM absorption materials. However, fabricating 1D core-shell bimetallic magnetic species is a significant challenge. Herein, 1D core-shell bimetallic magnetic chains are successfully prepared through a modified galvanic replacement reaction under an external magnetic field, which could facilitate the preparation of 1D core-shell noble magnetic chains. By delicately designing the orientation of bimetallic magnetic chains in polyvinylidene fluoride, the composites reveal the decreased complex permittivity and increased permeability compared with random counterparts. Thus, elevated EM wave absorption perfromances including an optimal reflection loss of -43.5 dB and an effective bandwidth of 7.3 GHz could be achieved for the oriented Cu@Co sample. Off-axis electron holograms indicate that the augmented magnetic coupling and remarkable polarization loss primarily contribute to EM absorption in addition to the antenna effect of the 1D structure to scatter microwaves and ohmic loss of the metallic attribute. This work can serve a guide to construct 1D core-shell bimetallic magnetic nanostructures and design magnetic configuration in polymer to tune EM parameters and strengthen EM absorption properties.

Progress on the Fabrication and Application of Electrospun Nanofiber Composites

Nanofibers are one of the most attractive materials in various applications due to their unique properties and promising characteristics for the next generation of materials in the fields of energy, environment, and health. Among the many fabrication methods, electrospinning is one of the most efficient technologies which has brought about remarkable progress in the fabrication of nanofibers with high surface area, high aspect ratio, and porosity features. However, neat nanofibers generally have low mechanical strength, thermal instability, and limited functionalities. Therefore, composite and modified structures of electrospun nanofibers have been developed to improve the advantages of nanofibers and overcome their drawbacks. The combination of electrospinning technology and high-quality nanomaterials via materials science advances as well as new modification techniques have led to the fabrication of composite and modified nanofibers with desired properties for different applications. In this review, we present the recent progress on the fabrication and applications of electrospun nanofiber composites to sketch a progress line for advancements in various categories. Firstly, the different methods for fabrication of composite and modified nanofibers have been investigated. Then, the current innovations of composite nanofibers in environmental, healthcare, and energy fields have been described, and the improvements in each field are explained in detail. The continued growth of composite and modified nanofiber technology reveals its versatile properties that offer alternatives for many of current industrial and domestic issues and applications.

Implications from Broadband Microwave Absorption of Metal-Modified SiC Fiber Mats

Understanding the physical requirements for a broad bandwidth is vital for the design of high-efficiency microwave absorber. Our recent works on silicon carbide (SiC) fiber mats-based absorbers imply that metal modification (e.g., Fe or Hf) could benefit their bandwidth effectively. For verification, we fabricated a Co/SiC fiber mat via a similar electrospinning process and subsequent pyrolysis at 1400 °C in Ar atmosphere. The results indicate that after Co modification, the SiC fiber mats show elevated permittivity and tangent loss. With a proper amount of Co adding, the mats could exhibit a wide bandwidth of around 8 GHz (ranging from 10 to 18 GHz) for effective absorption (reflection loss (RL) less than -10 dB) at 2.8 mm thickness. This is similar to our previous findings, confirming that metal modification could be an effective approach to extend the bandwidth of SiC mat absorbers. Explanations can be found through theoretical analysis with the quarter wavelength (λ/4) cancellation theory. It suggests that the declining permittivity (with the increase of frequency) is the key to keep the wavelength in material (λ_m) nearly unchanged within a frequency range. As a result, in this range, λ/4 cancellation could still be satisfied without changing thickness, which could explain the reasons for the broad bandwidth of metal-modified SiC fiber mats. With this model, it is further predicted that the effective absorption bandwidth could be even extended to be around 12 GHz with appropriate tangent loss. It should be emphasized that the implications obtained in this study could also be applicable to other dielectric absorbers. The requirement of permittivity and the proposed approach could serve as guidelines to achieve a wide bandwidth on a dielectric absorber relying on the λ/4 cancellation principle.

Banana Leaflike C-Doped MoS2 Aerogels toward Excellent Microwave Absorption Performance

We describe the design and manufacturing method of a lightweight C-doped MoS₂ aerogel with a special regular banana leaflike microstructure used for high-performance microwave absorbers. The aerogel precursor was first fabricated by a self-assembly process between alginate (Alg) and ammonium thiomolybdate (ATM), where Alg as a template was assembled with ATM into regular banana leaflike architectures along the ice growth direction during oriented freezing. After pyrolysis at 900 °C, the C-doped MoS₂ aerogels maintained low densities and porous hierarchal banana leaflike structures, where the banana leaves ranged in diameter from about 2 to 5 μm with the growth of small branches. Benefitting from these features, the C-doped MoS₂ aerogel possessed excellent microwave absorption performance in the frequency range of 2-18 GHz. The minimum reflection loss (RL) reached -43 dB at 5.4 GHz with a matching thickness of 4 mm, and the effective microwave absorption band (RL < -10 dB) reached 4 GHz (14-18 GHz) at a thickness of 1.5 mm. Our findings also provide strategies for designing MoS₂ aerogel nanostructures for electronic devices, catalysis, and other potential applications.

High-Performance Electromagnetic Wave Absorbing CNT/SiCf Composites: Synthesis, Tuning, and Mechanism

High-performance electromagnetic (EM) wave absorbing materials are strongly desired in many fields like portable devices and aircraft. Introducing carbon nanotubes (CNTs) to certain materials has been proved to be an effective method leading to good EM wave absorption capability. In this work, CNTs are successfully synthesized on SiC fibers with high speed by using a newly developed method which is far more efficient than the commonly used one. The obtained CNT/SiC_f composites exhibit high-performance EM wave absorption capability. With 0.72 wt % CNTs, the reflection loss of the 4 mm composite with only 20 wt % filler loading reaches -62.5 dB with the broad effective absorption bandwidth of 8.8 GHz, covering almost the entire Ku band and three-quarters X band. Moreover, the composites can be added to varying matrices so as to modify their EM wave absorption and other properties. The EM wave absorption performance can be easily tuned in a wide range by varying the CNT content, thickness, and filler loading. This work offers a new route for efficiently synthesizing CNTs but, more importantly, for designing high-performance and multifunctional EM wave absorbing materials.

Facile Preparation of Snowflake-Like MnO2 @NiCo2 O4 Composites for Highly Efficient Electromagnetic Wave Absorption

Snowflake-like MnO₂ @NiCo₂ O₄ composites were successfully fabricated by employing crossed snowflake-like MnO₂ nanorods as cores and one-dimensional (1D) NiCo₂ O₄ nanoneedles as shells. Impressively, the MnO₂ @NiCo₂ O₄ composites exhibited a highly efficient electromagnetic wave (EMW) absorbing capability, and the minimum reflection loss (RL) value reached -58.4 dB at 6.8 GHz for a thickness of 4.0 mm. The reasons for the improved EMW absorption capability of snowflake-like MnO₂ @NiCo₂ O₄ composites were analyzed. The unique core-shell structure, good impedance matching, and high dielectric loss were all found to be important contributors. Moreover, the interfacial polarization mainly stemmed from the heterostructure, a microcurrent generated from the 1D MnO₂ nanorods and NiCo₂ O₄ nanoneedles under alternating electromagnetic fields, and the synergistic effect from the different components were all beneficial to improve the EMW absorption performance. These results demonstrated that snowflake-like MnO₂ @NiCo₂ O₄ composites could be utilized as promising materials for practical EMW absorbing applications.

Integrating carbonyl iron with sponge to enable lightweight and dual-frequency absorption

In this work, sponge impregnated with iron pentacarbonyl was utilized to obtain a novel composite in which the carbonyl iron (CI) was embedded in a graphitized carbon matrix (CI-C). The CI that results from the thermal pyrolysis of iron pentacarbonyl can homogeneously disperse into the pore structures of the sponge skeleton, which not only improves the stability of the CI, but also modifies the impedance matching character. Moreover, the sponge bulk turns into graphitized carbon during the heat treatment (graphitized catalysis of magnetic metal on carbon at high temperature). Due to the respective strong dissipation ability of CI and the graphitized carbon matrix, the as-prepared CI-C sample exhibits a good microwave absorption performance, including expanding the effective absorption bandwidth and reduced weight, compared to pure CI. Moreover, the sample with 30 wt% paraffin loading not only shows strong reflection loss absorbing ability, but also possesses continuous dual-absorption peaks (9.96 GHz, -38.7 dB, and 13.8 GHz is -37.6 dB). This work not only extends the application of carbonyl iron as a lightweight microwave absorber with dual-absorption peaks but also initiates a new approach for artificially designed carbon-based composites via a simple sponge-impregnation method.

High-Temperature Oxidation-Resistant ZrN0.4B0.6/SiC Nanohybrid for Enhanced Microwave Absorption

Most microwave absorbers lose their function under harsh working conditions, such as a high temperature and an oxidative environment. Here, we developed a heterogeneous ZrN_0.4B_0.6/SiC nanohybrid via combined catalytic chemical vapor deposition (CCVD) and chemical vapor infiltration (CVI) processes using ZrB₂ as the starting material. The composition and structure of the ZrN_0.4B_0.6/SiC nanohybrid were controlled by tuning the CCVD and CVI parameters, such as reaction temperature, time, and reactant concentration. The optimal heterogeneous ZrN_0.4B_0.6/SiC nanohybrids were obtained initially by preparing ZrB₂@C via the CCVD process at 650 °C for 30 min and the subsequent CVI at 1500 °C, where the ZrB₂@C reacted with Si under N₂. The ZrN_0.4B_0.6/SiC nanohybrid exhibited enhanced microwave absorption ability with a minimum reflection loss value of approximately -50.8 dB at 7.7 GHz, a thickness of ∼3.05 mm, and antioxidation features at a high temperature of 600 °C. The heterogeneous ZrN_0.4B_0.6/SiC nanohybrid possessed reasonable conductivity, leading to dielectric loss, whereas SiC nanofibers formed a three-dimensional network that brought higher dipole moments, whereas a small part of the ZrN_0.4B_0.6/SiC nanohybrid structure generated an effective interface for higher attenuation of microwaves. Therefore, these material features synergistically resulted in a well-defined Debye relaxation, Maxwell-Wagner relaxation, dipole polarization, and the quarter-wavelength cancellation, which accounted for the enhanced microwave absorption.

Fabrication of Electrospun Polymer Nanofibers with Diverse Morphologies

Fiber structures with nanoscale diameters offer many fascinating features, such as excellent mechanical properties and high specific surface areas, making them attractive for many applications. Among a variety of technologies for preparing nanofibers, electrospinning is rapidly evolving into a simple process, which is capable of forming diverse morphologies due to its flexibility, functionality, and simplicity. In such review, more emphasis is put on the construction of polymer nanofiber structures and their potential applications. Other issues of electrospinning device, mechanism, and prospects, are also discussed. Specifically, by carefully regulating the operating condition, modifying needle device, optimizing properties of the polymer solutions, some unique structures of core⁻shell, side-by-side, multilayer, hollow interior, and high porosity can be obtained. Taken together, these well-organized polymer nanofibers can be of great interest in biomedicine, nutrition, bioengineering, pharmaceutics, and healthcare applications.

Pea-like Fe/Fe3C Nanoparticles Embedded in Nitrogen-Doped Carbon Nanotubes with Tunable Dielectric/Magnetic Loss and Efficient Electromagnetic Absorption

One-dimensional microstructure has been regarded as one of the most desirable configurations for magnetic carbon-based microwave absorbing materials (MAMs). Herein, pea-like Fe/Fe₃C nanoparticles embedded in nitrogen-doped carbon nanotubes (Fe/Fe₃C@NCNTs) are successfully prepared through a direct pyrolysis of the mixture of FeCl₃·6H₂O and melamine under inert atmosphere. The chemical composition and microstructural feature of these Fe/Fe₃C@NCNTs composites are highly dependent on the pyrolysis temperature. As a result, their electromagnetic properties can be also manipulated, where dielectric loss gradually decreases with the increasing pyrolysis temperature and magnetic loss presents a reverse variation trend. When the pyrolysis temperature reaches 600 °C, the as-obtained composite, Fe/Fe₃C@NCNTs-600 can perform a maximum reflection loss of -46.0 dB at 3.6 GHz with a thickness of 4.97 mm and a qualified bandwidth of 14.8 GHz with the integrated thickness from 1.00 to 5.00 mm. It is very interesting that the microwave absorption performance of this new kind of composites is not so susceptible to the pyrolysis temperature as those common magnetic carbon-based MAMs because there is an effective balance between dielectric loss and magnetic loss, which accounts for a very stable attenuation ability when the pyrolysis temperature range changes from 600 to 700 °C. These favorable characteristics, including low-cost raw materials, easy preparation, and stable performance, may render Fe/Fe₃C@NCNTs composites as a novel kind of MAMs in the future.

Enhanced Flexibility and Microwave Absorption Properties of HfC/SiC Nanofiber Mats

Hafnium carbide (HfC) phase, with a high melting point, excellent strength, and high electrical conductivity, could be a suitable addition to enhance the microwave absorption properties of one-dimensional silicon carbide (SiC) nanomaterials without sacrificing its high-temperature thermal stability. In the present work, HfC/SiC hybrid nanofiber mats with different HfC loading contents are fabricated by electrospinning and high-temperature pyrolysis. HfC hybrids with sizes of 5-10 nm are embedded in the SiC nanofibers. As the HfC content increases from 0 to 6.3 wt %, the average diameter of the fibers drops from 2.62 μm to 260 nm. Meanwhile, the electrical conductivity rises from 7.9 × 10^-8 to 4.2 × 10^-5 S/cm. Moreover, the flexibility of the nanofiber mats is also greatly improved, according to a 200-times 180° bending test. Furthermore, compared with pure SiC fiber mats, the HfC/SiC nanofiber mats possess much larger dielectric loss because of higher electrical conductivity. At the optimal HfC content of 2.5 wt %, the HfC/SiC nanofibers/silicon resin composite (10 wt %) exhibits a minimal reflection loss (RL) of -33.9 dB at 12.8 GHz and a 3 mm thickness with a broad effective absorption bandwidth (RL < -10 dB) of 7.4 GHz. The above results prove that introducing HfC into SiC nanofiber mats is an effective way to enhance their flexibility, dielectric properties, and microwave absorption performance.

In Situ Preparation of Cobalt Nanoparticles Decorated in N-Doped Carbon Nanofibers as Excellent Electromagnetic Wave Absorbers

Electrospinning and annealing methods are applied to prepare cobalt nanoparticles decorated in N-doped carbon nanofibers (Co/N-C NFs) with solid and macroporous structures. In detail, the nanocomposites are synthesized by carbonization of as-electrospun polyacrylonitrile/cobalt acetylacetonate nanofibers in an argon atmosphere. The solid Co/N-C NFs have lengths up to dozens of microns with an average diameter of ca. 500 nm and possess abundant cobalt nanoparticles on both the surface and within the fibers, and the cobalt nanoparticle size is about 20 nm. The macroporous Co/N-C NFs possess a hierarchical pore structure, and there are macropores (500 nm) and mesopores (2-50 nm) existing in this material. The saturation magnetization ( M_s) and coercivity ( H_c) of the solid Co/N-C NFs are 28.4 emu g^-1 and 661 Oe, respectively, and those of the macroporous Co/N-C NFs are 23.3 emu g^-1 and 580 Oe, respectively. The solid Co/N-C NFs exhibit excellent electromagnetic wave absorbability, and a minimum reflection loss (RL) value of -25.7 dB is achieved with a matching thickness of 2 mm for solid Co/N-C NFs when the filler loading is 5 wt %, and the effective bandwidth (RL ≤ -10 dB) is 4.3 GHz. Moreover, the effective microwave absorption can be achieved in the whole range of 1-18 GHz by adjusting the thickness of the sample layer and content of the dopant sample.

Three-Dimensional Hierarchical MoS2 Nanosheets/Ultralong N-Doped Carbon Nanotubes as High-Performance Electromagnetic Wave Absorbing Material

Here, we report a simple method to grow thin MoS₂ nanosheets (NSs) on the ultralong nitrogen-doped carbon nanotubes through anion-exchange reaction. The MoS₂ NSs are grown on ultralong nitrogen-doped carbon nanotube surfaces, leading to an interesting three-dimensional hierarchical structure. The fabricated hybrid nanotubes have a length of approximately 100 μm, where the MoS₂ nanosheets have a thickness of less than 7.5 nm. The hybrid nanotubes show excellent electromagnetic wave attenuation performance, with the effective absorption bandwidth of 5.4 GHz at the thicknesses of 2.5 mm, superior to the pure MoS₂ nanosheets and the MoS₂ nanosheets grown on the short N-doped carbon nanotube surfaces. The experimental results indicate that the direct growth of MoS₂ on the ultralong nitrogen-doped carbon nanotube surfaces is a key factor for the enhanced electromagnetic wave attenuation property. The results open the avenue for the development of ultralong transition metal dichalcogenides for electromagnetic wave absorbers.

Flexible Fe3Si/SiC ultrathin hybrid fiber mats with designable microwave absorption performance

Flexible Fe₃Si/SiC ultrathin fiber mats have been fabricated by electrospinning and high temperature treatment (1400 °C) using polycarbosilane (PCS) and ferric acetylacetonate (Fe(acac)₃) as precursors.

Economical synthesis of composites of FeNi alloy nanoparticles evenly dispersed in two-dimensional reduced graphene oxide as thin and effective electromagnetic wave absorbers

Developing electromagnetic wave absorbing materials prepared by a facile and economical way is a great challenge. Herein, we report a feasible route to synthesize a series of two-dimensional FeNi/rGO composites by a hydrothermal method followed by a carbonization process. The characterization confirms that nano-sized FeNi alloy nanoparticles are evenly supported onto graphene sheets without aggregation. The homogeneous dispersion of the nanoparticles may result from the introduction of glucose and the oxygen-containing groups on the surface of the graphene oxide. Measurements show that the microwave attenuation capability of the composites can be improved dramatically by adjusting the proportion of dielectric and magnetic components. Consequently, the two-dimensional magnetic material (FeNi/rGO-100) exhibits an excellent microwave absorption performance. In detail, the minimum reflection loss of −42.6 dB and effective bandwidth of 4.0 GHz can be reached with a thinner thickness of 1.5 mm. This study demonstrates that synergistic effects among the magnetic particles, reduced graphene oxide and amorphous carbon layers give rise to the highlighted microwave attenuation ability. Overall, the FeNi/rGO composite is a promising candidate to be used as a microwave absorber, and the feasible and economical method has shown potential application to construct multitudinous two-dimensional materials.

Two-dimensional magnetic FeNi/rGO composites with excellent microwave absorbing performance have been synthesized under the assistance of glucose.

SiC Nanofiber Mat: A Broad-Band Microwave Absorber, and the Alignment Effect

Fiber alignment is a key factor that determines the physical properties of nanofiber mats. In this work, SiC nanofiber mats with or without fiber alignment are fabricated via electrospinning and the microwave electromagnetic properties of their silicone resin composites (5 wt %) are investigated in 2-18 GHz. By comparing with the composite containing SiC whisker, it is found that the nanofiber mats show superior dielectric loss and a minimal reflection loss (RL) of around -49 dB at 8.6 GHz and 4.3 mm thickness, associated with a broad effective absorption (<-10 dB) bandwidth (EAB) of about 7.2 GHz at 2.8 mm thickness. Moreover, the performance can be further enhanced (RL = -53 dB at 17.6 GHz and 2.3 mm thickness) by aligning the nanofiber in the plane of mat, accompanied by the shift of absorption peak to higher-frequency direction and broader EAB up to 8.6 GHz at 3 mm. In addition, the stacking ways of aligned SiC nanofiber mats (either parallel or perpendicular) are proved to have a negligible effect on their microwave properties. Compared with parallel stacking of the aligned mats, cross-stacking (perpendicular) only leads to a slight drop of the attenuation ability. It confirms that alignment of nanofiber in the mats offers a more effective approach to improve the microwave absorption properties than changing the ways of stacking. Furthermore, it is worth mentioning that the low loading fraction (5 wt %) is a great advantage to reduce the weight as well as the cost for large-scale production. All of these facts indicate that the aligned SiC nanofiber mats can serve as a great lightweight and broad-band microwave absorber.

Magnetically Aligned Co-C/MWCNTs Composite Derived from MWCNT-Interconnected Zeolitic Imidazolate Frameworks for a Lightweight and Highly Efficient Electromagnetic Wave Absorber

Developing lightweight and highly efficient electromagnetic wave (EMW) absorbing materials is crucial but challenging for anti-electromagnetic irradiation and interference. Herein, we used multiwalled carbon nanotubes (MWCNTs) as templates for growth of Co-based zeolitic imidazolate frameworks (ZIFs) and obtained a Co-C/MWCNTs composite by postpyrolysis. The MWCNTs interconnected the ZIF-derived Co-C porous particles, constructing a conductive network for electron hopping and migration. Moreover, the Co-C/MWCNTs composite was aligned in paraffin matrix under an external magnetic field, which led to a stretch of the MWCNTs along the magnetic field direction. Due to the anisotropic permittivity of MWCNTs, the magnetic alignment considerably increased the dielectric loss of the Co-C/MWCNTs composite. Benefiting from the conductive network, the orientation-enhanced dielectric loss, and the synergistic effect between magnetic and dielectric components, the magnetically aligned Co-C/MWCNTs composite exhibited extremely strong EMW absorption, with a minimum reflection loss (RL) of -48.9 dB at a filler loading as low as 15 wt %. The specific RL value (RL/filler loading) of the composite was superior to that of the previous MOF-derived composite absorbers. It is expected that the proposed strategy can be extended to the fabrication of other lightweight and high-performance EMW-absorbing materials.

1D Cu@Ni nanorods anchored on 2D reduced graphene oxide with interfacial engineering to enhance microwave absorption properties

In this work, one-dimensional core–shell Cu@Ni nanorods which were anchored on two dimensional reduced graphene oxide (rGO) heterostructures were successfully prepared by a simple co-reduction method.

Constructing hierarchical porous nanospheres for versatile microwave response approaches: the effect of architectural design

Hierarchical porous nanospheres via functionalized structural design were obtained to achieve a promising microwave absorption performance.

Lightweight porous Co3O4 and Co/CoO nanofibers with tunable impedance match and configuration-dependent microwave absorption properties

In this study, we fabricated one-dimensional porous Co₃O₄ and Co/CoO nanofibers by calcination of cobalt(ii) oxalate dehydrate precursors in an environment filled with air and N₂, respectively.