Facile Fabrication of BCN Nanosheet-Encapsulated Nano-Iron as Highly Stable Fischer-Tropsch Synthesis Catalyst

Nanostructured Carbon-Doped BN for CO2 Capture Applications

Carbon-doped boron nitride (denoted by BN/C) was prepared through the pyrolysis at 1100 °C of a nanostructured mixture of an alkyl amine borane adduct and ammonia borane. The alkyl amine borane adduct acts as a soft template to obtain nanospheres. This bottom-up approach for the synthesis of nanostructured BN/C is relatively simple and compelling. It allows the structure obtained during the emulsion process to be kept. The final BN/C materials are microporous, with interconnected pores in the nanometer range (0.8 nm), a large specific surface area of up to 767 m2·g-1 and a pore volume of 0.32 cm3·g-1. The gas sorption studied with CO2 demonstrated an appealing uptake of 3.43 mmol·g-1 at 0 °C, a high CO2/N2 selectivity (21) and 99% recyclability after up to five adsorption-desorption cycles.

NBOH Site-Activated Graphene Quantum Dots for Boosting Electrochemical Hydrogen Peroxide Production

Carbon materials are considered promising 2/4 e^- oxygen reduction reaction (ORR) electrocatalysts for synthesizing H₂ O₂ /H₂ O via regulating heteroatom dopants and functionalization. Here, various doped and functionalized graphene quantum dots (GQDs) are designed to reveal the crucial active sites of carbon materials for ORR to produce H₂ O₂ . Density functional theory (DFT) calculations predict that the edge structure involving edge N, B dopant pairs and further OH functionalization to the B (NBOH) is an active center for 2e^- ORR. To verify the above predication, GQDs with an enriched density of NBOH (NBO-GQDs) are designed and synthesized by the hydrothermal reaction of NH₂ edge-functionalized GQDs with H₃ BO₃ forming six-member heterocycle containing the NBOH structure. When dispersed on conductive carbon substrates, the NBO-GQDs show H₂ O₂ selectivity of over 90% at 0.7 -0.8 V versus reversible hydrogen electrode in the alkaline solution in a rotating ring-disk electrode setup. The selectivity retains 90% of the initial value after 12 h stability test. In a flow cell setup, the H₂ O₂ production rate is up to 709 mmol g_catalyst ^-1  h^-1 , superior to most reported carbon- and metal-based electrocatalysts. This work provides molecular insight into the design and formulation of highly efficient carbon-based catalysts for sustainable H₂ O₂ production.

Microporous Borocarbonitrides BxCyNz: Synthesis, Characterization, and Promises for CO2 Capture

Porous borocarbonitrides (denoted BCN) were prepared through pyrolysis of the polymer stemmed from dehydrocoupled ethane 1,2-diamineborane (BH₃NH₂CH₂CH₂NH₂BH₃, EDAB) in the presence of F-127. These materials contain interconnected pores in the nanometer range with a high specific surface area up to 511 m² · g^-1. Gas adsorption of CO₂ demonstrated an interesting uptake (3.23 mmol · g^-1 at 0 °C), a high CO₂/N₂ selectivity as well as a significant recyclability after several adsorption-desorption cycles. For comparison's sake, a synthesized non-porous BCN as well as a commercial BN sample were studied to investigate the role of porosity and carbon doping factors in CO₂ capture. The present work thus tends to demonstrate that the two-step synthesis of microporous BCN adsorbent materials from EDAB using a bottom-up approach (dehydrocoupling followed by pyrolysis at 1100 °C) is relatively simple and interesting.

A reduced graphene oxide-Fe3O4 composite functionalized with cetyltrimethylammonium bromide for efficient adsorption of SARS-CoV-2 spike pseudovirus and human enteric viruses

The latent dangers of waterborne viral transmission have become a major public health concern. In this study, reduced graphene oxide (rGO)-Fe₃O₄ nanoparticles were decorated with cetyltrimethylammonium bromide (CTAB) to adsorb severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike pseudovirus and three human enteric viruses (HuNoV, HRV, and HAdV). The successful combination of CTAB with rGO-Fe₃O₄ was confirmed by transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, zeta potential, Brunner-Emmet-Teller, and vibrating sample magnetometer measurements. The adsorption of HuNoV and HAdV followed pseudo-first-order kinetics, while that of HRV conformed to the pseudo-second-order model. CTAB-functionalized rGO-Fe₃O₄ exhibited exceptionally high adsorption of HuNoV, HRV, HAdV and SARS-CoV-2 spike pseudovirus, with maximum adsorption capacities of 3.55 × 10⁷, 7.01 × 10⁷, 2.21 × 10⁷ and 6.92 × 10⁶ genome copies mg^-1, respectively. Moreover, the composite could effectively adsorb the four types of virus particles from coastal, tap, and river water. In addition, concentrating the virions using CTAB functionalized rGO-Fe₃O₄ composites before qPCR analysis significantly improved the detection limit. The results indicate that viruses are captured on the surface of CTAB functionalized rGO-Fe₃O₄ composites through electrostatic interactions and the intrinsic adsorption ability of rGO. Overall, CTAB-functionalized rGO-Fe₃O₄ composites are promising materials for the adsorption and detection of human enteric viruses as well as SARS-CoV-2 from complex aqueous environments.

Hexagonal Boron Nitride Meeting Metal: A New Opportunity and Territory in Heterogeneous Catalysis

Two dimensional (2D) hexagonal boron nitride (h-BN) has been ignored for a long time in catalysis research because of its chemical inertness. Recently there has been a significant advance highlighting the role of metal/h-BN interfaces in catalytic applications. In this Perspective, we summarize state-of-the-art progress regarding h-BN-involved metal catalysts. Vacancy- and defect-rich h-BN sheets are able to anchor and modify supported metals, in which the interfacial metal-support interaction effect helps to enhance catalytic performance. Oxidative etching of h-BN sheets causes encapsulation of metal catalysts via boron oxide (BO_x) species, which work synergistically with neighboring metal sites in catalysis. Covering a metal surface with ultrathin h-BN shells creates a 2D nanoreactor featuring confinement effect, providing a novel way to modulate metal-catalyzed reactions. Given all those fascinating combinations of metal catalyst and h-BN, the emerging opportunity when h-BN meets metal in heterogeneous catalysis is clearly underlined. The outlook, especially the challenges in the field, are discussed as well.

Biosugarcane-based carbon support for high-performance iron-based Fischer-Tropsch synthesis

Exploiting new carbon supports with adjustable metal-support interaction and low price is of prime importance to realize the maximum active iron efficiency and industrial-scale application of Fe-based catalysts for Fischer-Tropsch synthesis (FTS). Herein, a simple, tunable, and scalable biochar support derived from the sugarcane bagasse was successfully prepared and was first used for FTS. The metal-support interaction was precisely controlled by functional groups of biosugarcane-based carbon material and different iron species sizes. All catalysts synthesized displayed high activities, and the iron-time-yield of Fe₄/C_bio even reached 1,198.9 μmol g_Fe⁻¹ s⁻¹. This performance was due to the unique structure and characteristics of the biosugarcane-based carbon support, which possessed abundant C−O, C=O (η¹(O) and η²(C, O)) functional groups, thus endowing the moderate metal-support interaction, high dispersion of active iron species, more active ε-Fe₂C phase, and, most importantly, a high proportion of Fe_xC/Fe_surf, facilitating the maximum iron efficiency and intrinsic activity of the catalyst.

•

A kind of carbon support, derived from the sugarcane bagasse, is prepared

•

This biochar catalyst reaches an excellent FTY value in Fischer-Tropsch synthesis

•

Functional groups and Fe species sizes regulate metal-support interactions

•

Superior performance is due to abundant functional groups and ε-Fe₂C

Ambient-Stable Black Phosphorus-Based 2D/2D S-Scheme Heterojunction for Efficient Photocatalytic CO2 Reduction to Syngas

Black phosphorus (BP), an emerging remarkable photocatalytic semiconductor, is arousing strong interests in this field of solar-driven CO₂ reduction, but its stability and activity are still facing huge challenges. Here, an ambient-stable and effective 2D/2D heterostructure of BP/bismuth tungstate (Bi₂WO₆) with oxygen vacancy is innovatively designed for syngas production via photocatalytic CO₂ reduction. This work, not only resolves the stability problem of BP nanosheets by anchoring ultrasmall platinum (Pt) nanoparticles (∼2 nm) but also greatly improves the charge transfer efficiency by constructing S-scheme 2D/2D heterostructure with coupled oxygen defects. As a result, the generation rates of carbon monoxide (CO) and hydrogen (H₂) remarkably reach 20.5 and 16.8 μmol g^-1 h^-1, respectively, which are much higher than that of reported BP-based materials, and the accomplished CO/H₂ ratios (1:1-2:1) are exactly the most desirable syngas for industrial applications. Thus, this work constructs an efficient and ambient-stable BP-based photocatalyst for syngas production by CO₂ reduction at mild conditions.

Engineering of Yolk/Core-Shell Structured Nanoreactors for Thermal Hydrogenations

Heterogeneous hydrogenation reactions are of great importance for chemical upgrading and synthesis, but still face the challenges of controlling selectivity and long-term stability. To improve the catalytic performance, many hydrogenation reactions utilize special yolk/core-shell nanoreactors (YCSNs) with unique architectures and advantageous properties. This work presents the developmental and technological challenges in the preparation of YCSNs that are potentially useful for hydrogenation reactions, and provides a summary of the properties of these materials. The work also addresses the scientific challenges in applications of these YCSNs in various gas and liquid-phase hydrogenation reactions. The catalyst structures, catalytic performance, structure-performance relationships, reaction mechanisms, and unsolved problems are discussed too. Also, a brief outlook and opportunities for future research in this field are presented. This work on the advancements in YCSNs might inspire the creation of new materials with desired structures for achieving maximal hydrogenation performances.

Mn-Decorated CeO2 nanorod supported iron-based catalyst for high-temperature Fischer–Tropsch synthesis of light olefins

The synergistic effect between Mn and Ce can improve electrons transfer from Ce to Fe and the oxygen migration. The remarkable properties promote the dissociation of CO, suppress the hydrogenation, and improve the selectivity of light olefins.

Magnetite (Fe3O4) Nanoparticles in Biomedical Application: From Synthesis to Surface Functionalisation

Nanotechnology has gained much attention for its potential application in medical science. Iron oxide nanoparticles have demonstrated a promising effect in various biomedical applications. In particular, magnetite (Fe3O4) nanoparticles are widely applied due to their biocompatibility, high magnetic susceptibility, chemical stability, innocuousness, high saturation magnetisation, and inexpensiveness. Magnetite (Fe3O4) exhibits superparamagnetism as its size shrinks in the single-domain region to around 20 nm, which is an essential property for use in biomedical applications. In this review, the application of magnetite nanoparticles (MNPs) in the biomedical field based on different synthesis approaches and various surface functionalisation materials was discussed. Firstly, a brief introduction on the MNP properties, such as physical, thermal, magnetic, and optical properties, is provided. Considering that the surface chemistry of MNPs plays an important role in the practical implementation of in vitro and in vivo applications, this review then focuses on several predominant synthesis methods and variations in the synthesis parameters of MNPs. The encapsulation of MNPs with organic and inorganic materials is also discussed. Finally, the most common in vivo and in vitro applications in the biomedical world are elucidated. This review aims to deliver concise information to new researchers in this field, guide them in selecting appropriate synthesis techniques for MNPs, and to enhance the surface chemistry of MNPs for their interests.

Nb2BN2− cluster anions reduce four carbon dioxide molecules: reactivity enhancement by ligands

The thermal gas-phase reactions of Nb₂BN₂⁻ cluster anions with carbon dioxide have been explored by using the art of time-of-flight mass spectrometry and density functional theory calculations.

Fischer–Tropsch synthesis using a cobalt catalyst supported on graphitic carbon nitride

The nitrogen atoms in a g-C₃N₄ support improved cobalt reduction in a prepared Co/g-C₃N₄ catalyst.

Nonmetallic boron nitride embedded graphitic carbon catalyst for oxidative dehydrogenation of ethylbenzene

Nonmetallic BN embedded graphitic carbon hybrid had abundant carbonyl groups as the active site and enriched BO species as the oxygen adsorption sites, exhibiting a high catalytic performance for oxidative dehydrogenation of ethylbenzene to styrene with high yield.

Computational Electrochemistry of Water Oxidation on Metal-Doped and Metal-Supported Defective h-BN

Metal-doped and metal-supported two-dimensional materials are attracting a lot of interest as potentially active electrocatalysts for reduction and oxidation processes. Previously, when a non-regular 2 D h-BN layer was grown on a Cu(111) surface, metal adatoms were found to spontaneously emerge from the bulk to fill the atomic holes in the structure and become available for surface catalysis. Herein, computational electrochemistry is used to investigate and compare the performance of Cu-doped and Cu-supported pristine and defective h-BN systems for the electrocatalytic water oxidation reaction. For the various model systems, the intermediate species of this multistep oxidation process are identified and the free-energy variations for each step of reaction are computed, even for those steps that do not involve an electron or a proton transfer. Both associative and O₂ direct evolution mechanisms are considered. On this thermodynamic basis, the potential-determining step, the thermodynamic-determining step, and consequently the theoretical overpotential are determined for comparison with experiments. Small Cu clusters (tetramers) trapped in the h-BN defective lattice on a Cu(111) support are found to be very active for the water oxidation reaction since such systems are characterized by a low overpotential and by a small energy cost for O₂ release from the catalyst, which is often observed to be a major limit for other potential electrocatalysts.

Doping Nanoscale Graphene Domains Improves Magnetism in Hexagonal Boron Nitride

Carbon doping can induce unique and interesting physical properties in hexagonal boron nitride (h-BN). Typically, isolated carbon atoms are doped into h-BN. Herein, however, the insertion of nanometer-scale graphene quantum dots (GQDs) is demonstrated as whole units into h-BN sheets to form h-CBN. The h-CBN is prepared by using GQDs as seed nucleations for the epitaxial growth of h-BN along the edges of GQDs without the assistance of metal catalysts. The resulting h-CBN sheets possess a uniform distrubution of GQDs in plane and a high porosity macroscopically. The h-CBN tends to form in small triangular sheets which suggests an enhanced crystallinity compared to the h-BN synthesized under the same conditions without GQDs. An enhanced ferromagnetism in the h-CBN emerges due to the spin polarization and charge asymmetry resulting from the high density of CN and CB bonds at the boundary between the GQDs and the h-BN domains. The saturation magnetic moment of h-CBN reaches 0.033 emu g^-1 at 300 K, which is three times that of as-prepared single carbon-doped h-BN.

Effect of a potassium promoter on the Fischer–Tropsch synthesis of light olefins over iron carbide catalysts encapsulated in graphene-like carbon

Enhanced FTO catalyst performance and catalyst stability are achieved over a graphene-like carbon encapsulated iron carbide catalyst, which is prepared by a facile pyrolysis method.

Directly Converting Syngas to Linear α-Olefins over Core-Shell Fe3O4@MnO2 Catalysts

Converting syngas to value-added chemicals via Fischer-Tropsch synthesis has attracted much attention, whereas the direct hydrogenation of CO to heavy olefins, especially linear α-olefins (LAOs), remains a challenge. In this study, we designed a core-shell Fe₃O₄@MnO₂ catalyst to realize the direct conversion of syngas to LAOs with high efficiency. This catalyst exhibited a high selectivity of 79.60% for total alkenes and 64.95% for C₄⁺ alkenes, 91% of which are LAOs, at a CO conversion of approximately 75%. Promotion of the electron transfer from MnO₂ to Fe₃O₄ inside the core-shell Fe₃O₄@MnO₂ catalyst facilitated the dissociative adsorption of CO molecules on Fe₃O₄ and the spillover of H atoms onto the MnO₂, which enhanced C-C coupling, weakened the hydrogenation activity of the catalyst, and improved the production of LAOs. A superior stability over 100 h was observed, demonstrating the promising potential of this catalyst for industrial applications.

Preparation of palladized carbon nanotubes encapsulated iron composites: highly efficient dechlorination for trichloroethylene and low corrosion of nanoiron

A method developed based on the capillary effect and capillary condensation theory was used to synthesize an innovative Fe/C/Pd composite in this study. This composite (Fe@CNTs@Pd) consists of carbon nanotubes (CNTs) with nanoscale zerovalent iron (NZVI) on the inner surface and palladium nanoparticles supported on the outer surface of CNTs. This structure successfully addresses the problems of high iron corrosion rate and lower utilization rate of hydrogen in the application of bimetal nanoparticles for trichloroethylene (TCE) removal. TCE degradation experiments and electrochemical tests were conducted to investigate the material properties and reaction mechanisms of the composite. It is found that the prepared composite material contribute a high level of TCE dechlorination rate and substantially reduced hydrogen production during iron corrosion in water compared with the conventional CNTs-supported bimetal materials (Fe/Pd@CNTs). Hydrogen spillover effect helps the reactivity of Fe@CNTs@Pd for TCE degradation and suppressed the galvanic cell effect, which results in a stronger resistance to corrosion. Although the K_obs of Fe@CNTs@Pd was 16.87% lower than that of Fe/Pd@CNTs, the hydrogen production rate of Fe@CNTs@Pd was 10 times slower than that of Fe/Pd@CNTs. Therefore, Fe@CNTs@Pd shows a significant reduction in the corrosion rate at a cost of slightly slower degradation of TCE. In sum, the prepared composites demonstrate important characteristics, including alleviating NZVI agglomeration, maintaining high TCE removal efficiency and reducing the corrosion of NZVI.

Fe3O4 nanocubes assembled on RGO nanosheets: Ultrasound induced in-situ and eco-friendly synthesis, characterization and their excellent catalytic performance for the production of liquid fuel in Fischer-tropsch synthesis

In this study, Fe₃O₄ nanocubes (NCs) decorated on RGO nanosheets (NSs) structures were successfully synthesized through an innovative and environmentally-friendly rapid sonochemical method. More importantly, iron(II) sulfate heptahydrate and GO were employed as precursors and water as reaction medium, meanwhile, NaOH within the generated free radicals from the high intensity ultrasound were sufficient as reducing and base agent in our clean synthesis. Moreover, the hydrothermal method as a conventional approach was employed to synthesize the same catalysts for the comparison with the ultrasonocation technique. The as-synthesized Fe₃O₄ and RGO/Fe₃O₄ NSs catalysts were exposed to industrially relevant Fischer-tropsch synthesis (FTS) conditions at various reaction temperatures (250-290 °C), and they subjected to fully characterization before and after FTS reaction using XRD, TEM, HRTEM, EDS mapping, XPS, FTIR, BET, H₂-TPR, H₂-TPD and CO-TPD to understand the structure-performance relationships. Notably, the catalysts produced using the sonochemical method had a better CO conversion rate [Fe₃O₄ (80%), RGO/Fe₃O₄ (82%)] than the hydrothermally synthesized catalysts. However, compared to the naked-Fe₃O₄ catalysts, the sonochemically and hydrothermally synthesized RGO-supported Fe₃O₄ catalysts had higher long chain hydrocarbon (C5+) selectivity values (72% and 67%) and C₂-C₄ olefin/paraffin selectivity ratio (3.2 and 2) and low CH4 selectivity values (6% and 8.5%), respectively. This can be attributed to their high surface area, the degree of reducibility, and content of Hägg iron carbide (χ-Fe₅C₂) as the most active phase of the FTS reaction. Proposed reaction mechanisms for the sonochemical and hydrothermal reaction synthesis of Fe₃O₄ and RGO/Fe₃O₄ nanoparticles are discussed. In conclusion, our developed surfactantless-sonochemical method holds promise for the eco-friendly synthesis of highly efficient catalysts materials for FTS reaction.

Preparation of boron nitride nanosheet-coated carbon fibres and their enhanced antioxidant and microwave-absorbing properties

The coating of BN nanosheets on carbon fibers could enhance the anti-oxidation and microwave absorbing properties of carbon fibers significantly.