Warm-White-Light-Emitting Diode Based on a Dye-Loaded Metal-Organic Framework for Fast White-Light Communication

Aggregation Induced Emission-Based Covalent Organic Frameworks for High-Performance Optical Wireless Communication

Here, we report the first utilization of covalent organic frameworks (COFs) in optical wireless communication (OWC) applications. In the solid form, aggregation-induced emission (AIE) luminogen often shows promising emissive characteristics that augment radiative decays and improve fluorescence. We have synthesized an AIE-COF through the Knoevenagel condensation reaction by taking advantage of the ability to carefully design and alter the COF structure by integrating an AIE luminogen with linear building blocks. The synthesized AIE-COF exhibited a high solid-state photoluminescence quantum yield (∼39%) and a short photoluminescence lifetime (∼1 ns), crucial for achieving modulation bandwidth for high-speed OWC applications. For comparison, we constructed an aggregation-caused quenching based COF, showing a similar lifetime but almost insignificant quantum yield. The orthogonal frequency-division multiplexing modulation strategy employed by the AIE-COF demonstrates remarkable high-rate data transmission, with a wide -3 dB modulation bandwidth of nearly 200 MHz and achieving high net data rates of 825 Mb/s, outperforming traditional materials. These results open new avenues for the ability to design and finetune new COF materials for their utilization as color converters in developing cutting-edge OWC components, enabling faster and more efficient data transfer.

Leveraging Intermolecular Charge Transfer for High-Speed Optical Wireless Communication

Intermolecular charge transfer (CT) complexes have emerged as versatile platforms with customizable optical properties that play a pivotal role in achieving tunable photoresponsive materials. In this study, we introduce an innovative approach for enhancing the modulation bandwidth and net data rates in optical wireless communications (OWCs) by manipulating combinations of monomeric molecules within intermolecular CT complexes. Concurrently, we extensively investigate the intermolecular charge transfer mechanism through diverse steady-state and ultrafast time-resolved spectral techniques in the mid-infrared range complemented by theoretical calculations using density functional theory. These intermolecular CT complexes empower precise control over the -3 dB bandwidth and net data rates in OWC applications. The resulting color converters exhibit promising performance, achieving a net data rate of ∼100 Mb/s, outperforming conventional materials commonly used in the manufacture of OWC devices. This research underscores the substantial potential of engineering intermolecular charge transfer complexes as an ongoing progression and commercialization within the OWC. This carries profound implications for future initiatives in high-speed and secure data transmission, paving the way for promising endeavors in this area.

White light emission from helically stacked humin-mimic based H-aggregates in heteroatom free carbon dots

White light emission (WLE), particularly from heteroatom free carbon dots (CDs), is unusual. Besides, deciphering the origin of WLE from a H-aggregated molecular fluorophore in such kinds of CDs is a challenging task due to their non-fluorescent character resulting from a forbidden transition from a lower-energy excitonic state. Therefore, rigorous investigation on their elusive excited state photophysical properties along with their steady-state optical phenomena has to be carried out to shed light on the nature of distinct emissive states formed in the CDs. Herein, for the first time, we report WLE from imperfect H-aggregates of co-facially π-π stacked humin-like structures comprising furfural monomer units as a unique molecular fluorophore in CDs, as revealed from combined spectroscopic and microscopic studies, synthesized through hydrothermal treatment of the single precursor, dextrose. H-aggregates in CDs show a broad range of excitation-dependent emission spectra with color coordinates close to pure white light, i.e., CIE (0.35, 0.37) and a color temperature of 6000 K. Imperfect orientation between the transition dipole moments of adjacent monomer units in the H-aggregate's molecular arrangement is expected to cause ground state symmetry breaking, as confirmed by Circular Dichroism (CD) studies, which established helically stacked nature in molecular aggregates and produced significant oscillatory strength at lower energy excitonic states to enable fluorescence. TRES and TAS investigations have been performed to minimise the intricacies associated with excited state photophysics, which is regarded as an essential step in gaining a grasp on emissive states. Based on the observation of two isoemissive spots in the time-resolved area normalized emission spectra (TRANES), the existence of three oligomeric species in the excited state equilibrium of the pure/hybrid H-aggregates has been established. The exciton dynamics through electron relaxation from the higher to the lower excitonic states, charge transfer (CT) states, and surface trap mediated emission in excimer states of H-aggregates have also been endorsed as three distinct emissive states from femtosecond transient absorption spectroscopy (TAS) studies corroborating with their steady-state absorption and emission behavior. The results would demonstrate the usage of CDs as a cutting-edge fluorescent material for creating aggregate-induced white light emission.

Synthesis Strategies, Optical Mechanisms, and Applications of Dual-Emissive Carbon Dots

Tuning the optical properties of carbon dots (CDs) and figuring out the mechanisms underneath the emissive phenomena have been one of the most cutting-edge topics in the development of carbon-based nanomaterials. Dual-emissive CDs possess the intrinsic dual-emission character upon single-wavelength excitation, which significantly benefits their multi-purpose applications. Explosive exploitations of dual-emissive CDs have been reported during the past five years. Nevertheless, there is a lack of a systematic summary of the rising star nanomaterial. In this review, we summarize the synthesis strategies and optical mechanisms of the dual-emissive CDs. The applications in the areas of biosensing, bioimaging, as well as photoelectronic devices are also outlined. The last section presents the main challenges and perspectives in further promoting the development of dual-emissive CDs. By covering the most vital publications, we anticipate that the review is of referential significance for researchers in the synthesis, characterization, and application of dual-emissive CDs.

Multifunctional difluoroboron β-diketonate-based luminescent receiver for a high-speed underwater wireless optical communication system

The last decade has witnessed considerable progress in underwater wireless optical communication in complex environments, particularly in exploring the deep sea. However, it is difficult to maintain a precise point-to-point reception at all times due to severe turbulence in actual situations. To facilitate efficient data transmission, the color-conversion technique offers a paradigm shift in large-area and omnidirectional light detection, which can effectively alleviate the étendue limit by decoupling the field of view and optical gain. In this work, we investigated a series of difluoroboron β-diketonate fluorophores by measuring their photophysical properties and optical wireless communication performances. The emission colors were tuned from blue to green, and >0.5 Gb/s data transmission was achieved with individual color channel in free space by implementing an orthogonal frequency-division multiplexing (OFDM) modulation scheme. In the underwater experiment, the fluorophore with the highest transmission speed was fabricated into a 4×4 cm2 luminescent concentrator, with the concentrated emission from the edges coupled with an optical fiber array, for large-area photodetection and optical beam tracking. The net data rates of 130 Mb/s and 217 Mb/s were achieved based on nonreturn- to-zero on-off keying and OFDM modulation schemes, respectively. Further, the same device was used to demonstrate the linear light beam tracking function with high accuracy, which is beneficial for sustaining a reliable and stable connection in a dynamic, turbulent underwater environment.

Encapsulating Organic Dyes in Metal-Organic Frameworks for Color-Tunable and High-Efficiency White-Light-Emitting Properties

The design of white-light phosphor is highly desirable for practical applications in SSL (solid-state lighting) and its related fields. Dye-loaded metal-organic frameworks (MOFs) have been widely demonstrated as one type of promising down conversion materials for WLEDs (white-light-emitting diodes), but two issues (dye leakage and inadequate quantum efficiency) require to be addressed before possible applications. Here, a series of single-phase dyes@In-MOF phosphors have been prepared in two different ways: the in-situ process and soaking method. The study of these dyes@In-MOF phosphors confirms the importance of this in-situ process that could effectively increase dye loading and quantum efficiency and greatly decrease dye leakage. As a result, a perfect WLED, fabricated using the in-situ-synthesized (AF/RhB@In-MOF)-3 (AF: Acriflavine; RhB: Rhodamine B) and 450 nm blue LED chip, exhibited a very high quantum yield (QY, up to 42.27%), a high luminous efficacy (LE) of 50.75 lm/W, a high color rendering index (CRI) of 91.2, and nearly identical Commission International ed'Eclairage (CIE) coordinates (0.33,0.31), indicating the potential application of the dye-loaded MOFs with good color quality in smart white LEDs.

Single-Component White Light Emission from a Metal-Coordinated Cyclotriveratrylene-Based Coordination Polymer

A coordination polymer, namely, [Cd₃L(H₂O)₃]·DMA·4H₂O (1) (DMA = N,N-dimethylacetamide), was prepared by the solvothermal reaction of cyclotriveratrylene-based ligand 5,6,12,13,19,20-hexacarboxy-methoxy-cyclotriveratrylene (H₆L) and Cd(NO₃)₂·4H₂O. In 1, a two-dimensional structure was constructed by the connection of hexanuclear Cd-O clusters and L^6- anions. Photoluminescence measurements indicated that 1 displayed tunable photoluminescence through the variation of the excitation wavelength. Significantly, the white light emission of 1 can be observed with a broad excitation wavelength range from 320 to 385 nm. When 1 is excited by 385 nm light, its chromatic coordinate is (0.29, 0.34), which is located very close to the pure white light region (0.33, 0.33). Meanwhile, the color temperature (CCT) is 7994 K, which corresponds well to "cold" white light.

Tunable fluorescence emission based on multi-layered MOF-on-MOF

Luminescent metal-organic frameworks (MOFs) have garnered considerable attention in various fields. Herein, we proposed a hierarchical confinement strategy based on MOF-on-MOF to tune luminescence emission ranging from blue to red including white light in a flexible way. The easily available ZIF-8 MOF was used as a host for the confinement of two kinds of size-matching dyes (perylene and rhodamine B) to obtain a layered ZIF-8@dye@ZIF-8@dye via in situ encapsulation and seed-mediated synthesis. ZIF-8@dye@ZIF-8@dye materials with different fluorescence emission in dispersed and solid states were both obtained by tuning the initial encapsulation concentration of dye and changing the structure of the inner and outer ZIF-8@dye layers. To our delight, ZIF-8@0.125perylene@ZIF-8@25RhB with white light emission in the dispersed state was obtained; meanwhile, ZIF-8@0.125perylene + 25RhB and mechanically mixed ZIF-8@0.125perylene + ZIF-8@25RhB could not realize white light emission under the same conditions, indicating that the proposed hierarchical confinement strategy facilitated white light regulation. Similarly, the emission of ZIF-8@dye@ZIF-8@dye in the solid state has also been investigated; ZIF-8@perylene@ZIF-8@3RhB with white light emission was obtained, while white light emission could not be achieved in ZIF-8@perylene + 3RhB and ZIF-8@perylene + ZIF-8@3RhB, which further indicated the importance of the hierarchical confinement strategy based on MOF-on-MOF. The proposed hierarchical confinement strategy may also inspire the development of other functional optical MOF materials.

Confinement of Luminescent Guests in Metal-Organic Frameworks: Understanding Pathways from Synthesis and Multimodal Characterization to Potential Applications of LG@MOF Systems

This review gives an authoritative, critical, and accessible overview of an emergent class of fluorescent materials termed "LG@MOF", engineered from the nanoscale confinement of luminescent guests (LG) in a metal-organic framework (MOF) host, realizing a myriad of unconventional materials with fascinating photophysical and photochemical properties. We begin by summarizing the synthetic methodologies and design guidelines for representative LG@MOF systems, where the major types of fluorescent guest encompass organic dyes, metal ions, metal complexes, metal nanoclusters, quantum dots, and hybrid perovskites. Subsequently, we discuss the methods for characterizing the resultant guest-host structures, guest loading, photophysical properties, and review local-scale techniques recently employed to elucidate guest positions. A special emphasis is paid to the pros and cons of the various methods in the context of LG@MOF. In the following section, we provide a brief tutorial on the basic guest-host phenomena, focusing on the excited state events and nanoscale confinement effects underpinning the exceptional behavior of LG@MOF systems. The review finally culminates in the most striking applications of LG@MOF materials, particularly the "turn-on" type fluorochromic chemo- and mechano-sensors, noninvasive thermometry and optical pH sensors, electroluminescence, and innovative security devices. This review offers a comprehensive coverage of general interest to the multidisciplinary materials community to stimulate frontier research in the vibrant sector of light-emitting MOF composite systems.

Metal-Organic Frameworks in Mixed-Matrix Membranes for High-Speed Visible-Light Communication

Mixed-matrix membranes (MMMs) based on luminescent metal-organic frameworks (MOFs) and emissive polymers with the combination of their unique advantages have great potential in separation science, sensing, and light-harvesting applications. Here, we demonstrate MMMs for the field of high-speed visible-light communication (VLC) using a very efficient energy transfer strategy at the interface between a MOF and an emissive polymer. Our steady-state and ultrafast time-resolved experiments, supported by high-level density functional theory calculations, revealed that efficient and ultrafast energy transfer from the luminescent MOF to the luminescent polymer can be achieved. The resultant MMMs exhibited an excellent modulation bandwidth of around 80 MHz, which is higher than those of most well-established color-converting phosphors commonly used for optical wireless communication. Interestingly, we found that the efficient energy transfer further improved the light communication data rate from 132 Mb/s of the pure polymer to 215 Mb/s of MMMs. This finding not only showcases the promise of the MMMs for high-speed VLC but also highlights the importance of an efficient and ultrafast energy transfer strategy for the advancement of data rates of optical wireless communication.

Construction of Large-Scale Conjugated Functionalized Cyclotriphosphazene Lanthanide Framework for Selective Sensing of Volatile Organic Compounds and Assembly of Color-Tunable Dye-Encapsulated Composites

A flexible functionalized cyclotriphosphazene hexacarboxylic acid, hexakis(4-carboxylatephenoxy) cyclotriphosphazene (HCPCP), is used for the synthesis of a family of fluorescent Ln-HCPCP frameworks (Ln = La, Pr, Nd, Gd, and Ho). Structural analysis shows that the compounds exhibit 3D structures with [Ln₃(COO)₁₀], secondary building units formed by Ln-O-C-O-Ln connection. Then the molecules are connected to each other through HCPCP, forming rectangular channels along the c-direction. Interestingly, the fluorescence sensing studies show that compound 1 could be used as a multifunctional fluorescence sensor toward volatile organic compounds via different fluorescence emission behaviors. Moreover, a series of Dye@La-HCPCP composites (Dye = rhodamine B, safranine T, crystal violet, and malachite green) are successfully prepared with different quantum yields by the solvothermal reaction followed by cation exchanges.

A 2-fold interpenetrated zinc–organic framework with Lewis basic triazole sites: luminescence sensing of Fe3+ and Cr2O72−, and warm white-light emission by encapsulated Ln3+ ions

A 2-fold interpenetrated Zn-MOF with Lewis basic triazole sites shows selective luminescence sensing of Fe3+ and Cr2O72− and tunable white-light emission by encapsulated Ln3+ ions.

Luminescent MOFs (LMOFs): Recent Advancement Towards a Greener WLED Technology

The replacement of the traditional incandescent, halogen and fluorescent lamps by white light emitting diodes (WLEDs) is expected to reduce the global electricity consumption by one-third by 2030, according to...

Recent advances in luminescent metal-organic frameworks and their photonic applications

In recent years, metal-organic frameworks (MOFs) have been attracting ever more interest owing to their fascinating structures and widespread applications. Among the optoelectronic materials, luminescent MOFs (LMOFs) have become one of the most attractive candidates in the fields of optics and photonics thanks to the unique characteristics of their frameworks. Luminescence from MOFs can originate from either the frameworks, mainly including organic linkers and metal ions, or the encapsulated guests, such as dyes, perovskites, and carbon dots. Here, we systematically review the recent progress in LMOFs, with an emphasis on the relationships between their structures and emission behaviour. On this basis, we comprehensively discuss the research progress and applications of multicolour emission from homogeneous and heterogeneous structures, host-guest hybrid lasers, and pure MOF lasers based on optically excited LMOFs in the field of micro/nanophotonics. We also highlight recent developments in other types of luminescence, such as electroluminescence and chemiluminescence, from LMOFs. Future perspectives and challenges for LMOFs are provided to give an outlook of this emerging field. We anticipate that this article will promote the development of MOF-based functional materials with desired performance towards robust optoelectronic applications.

A Luminescent Guest@MOF Nanoconfined Composite System for Solid-State Lighting

A series of rhodamine B (RhB) encapsulated zeolitic imidazolate framework-8 (RhB@ZIF-8) composite nanomaterials with different concentrations of guest loadings have been synthesized and characterized in order to investigate their applicability to solid-state white-light-emitting diodes (WLEDs). The nanoconfinement of the rhodamine B dye (guest) in the sodalite cages of ZIF-8 (host) is supported by fluorescence spectroscopic and photodynamic lifetime data. The quantum yield (QY) of the luminescent RhB@ZIF-8 material approaches unity when the guest loading is controlled at a low level: 1 RhB guest per ~7250 cages. We show that the hybrid (luminescent guest) LG@MOF material, obtained by mechanically mixing a suitably high-QY RhB@ZIF-8 red emitter with a green-emitting fluorescein@ZIF-8 “phosphor” with a comparably high QY, could yield a stable, intensity tunable, near-white light emission under specific test conditions described. Our results demonstrate a novel LG@MOF composite system exhibiting a good combination of photophysical properties and photostability, for potential applications in WLEDs, photoswitches, bioimaging and fluorescent sensors.

Differentiation of Epoxide Enantiomers in the Confined Spaces of an Homochiral Cu(II) Metal-Organic Framework by Kinetic Resolution

TAMOF-1, a homochiral metal-organic framework (MOF) constructed from an amino acid derivative and Cu(II), was investigated as a heterogeneous catalyst in kinetic resolutions involving the ring opening of styrene oxide with a set of anilines. The branched products generated from the ring opening of styrene oxide with anilines and the unreacted epoxide were obtained with moderately high enantiomeric excesses. The linear product arising from the attack on the non-benzylic position of styrene oxide underwent a second kinetic resolution by reacting with the epoxide, resulting in an amplification of its final enantiomeric excess and a concomitant formation of an array of isomeric aminodiols. Computational studies confirmed the experimental results, providing a deep understanding of the whole process involving the two successive kinetic resolutions. Furthermore, TAMOF-1 activity was conserved after several catalytic cycles. The ring opening of a meso-epoxide with aniline catalyzed by TAMOF-1 was also studied and moderate enantioselectivities were obtained.

Excited State Energy Transfer in Metal-Organic Frameworks

Excited state energy transfer in metal-organic frameworks (MOFs) is of great interest due to potential application of these materials in photocatalysis and fluorescence sensing. In photocatalysis, a light-harvesting antenna of MOFs can collect energy from a much larger area than a single reaction center and efficiently transport the energy to the active site to enhance photocatalytic efficiency, mimicking nature photosynthesis. In fluorescence sensing, excited state traveling on the framework can search for analyte quencher molecules to give amplified fluorescence quenching, so that one quencher turns off multiple excited states to enhance signal. Key to these designer performances is highly efficient energy transfer on these framework materials that are determined by types of excited states, dimension of the materials, and structure of the frameworks. Advancement of MOF synthetic chemistry provides new tools to control the rate and directionality of energy transfer in these materials, opening opportunities in manipulating excited states at an unprecedented level.

Encapsulation of Dyes in Luminescent Metal-Organic Frameworks for White Light Emitting Diodes

The development of white light emitting diodes (WLEDs) holds great promise for replacing traditional lighting devices due to high efficiency, low energy consumption and long lifetime. Metal-organic frameworks (MOFs) with a wide range of luminescent behaviors are ideal candidates to produce white light emission in the phosphor-converted WLEDs. Encapsulation of emissive organic dyes is a simple way to obtain luminescent MOFs. In this review, we summarize the recent progress on the design and constructions of dye encapsulated luminescent MOFs phosphors. Different strategies are highlighted where white light emitting phosphors were obtained by combining fluorescent dyes with metal ions and linkers.

Feasible polarised white-light emission based on conjugate plane-structured yellow/blue dye molecules encapsulated in metal-organic frameworks

We use a two-stage hierarchical growth method to encapsulate the blue KSN and yellow RhB molecules into a MOF crystal. By aligning these two conjugate plane-structured molecules in the MOF channel, a polarised white-light emission is obtained, with CIE coordinates of (0.3285, 0.3204) and a polarization ratio of 2.98.

Dual-functional porous MOFs with hierarchical guest encapsulation for room-temperature phosphorescence and white-light-emission

The development of optical materials with room temperature phosphorescence (RTP) and white light emission (WLEDs) is highly desirable and remains a challenging task. Herein, a porous metal-organic framework PCN-921 with a high quantum yield (Φ_F = 93.6%) was achieved. To make full use of the advantages of the high porosity of PCN-921, we hierarchically encapsulated different guest molecules coronene and rhodamine B (RhB) into the framework. Unsurprisingly, the hybrid material coronene@PCN-921 was obtained after in situ encapsulation of the guest coronene into the framework, and it exhibits obvious RTP behavior with a long phosphorescence lifetime of 62.5 ns. Subsequently, second guest RhB molecules were introduced after soaking in RhB solution and the material RhB@coronene@PCN-921 was achieved. Interestingly, it exhibits white light emission with the CIE coordinates of (0.29, 0.34), and can be used as a high performance WLED lamp. This is the first work on dual-functional hybrid dyes@MOFs with hierarchical guest encapsulation for RTP and white light emission, which suggests the potential applications of MOFs in multifunctional optical devices.

Dye encapsulation engineering in a tetraphenylethylene-based MOF for tunable white-light emission

The development of efficient and stable white-light emissive materials is highly desirable in displays and solid-state lighting. Here we present a high-quality white-light emitter based a dual-emitting MOF hybrid, which is achieved by dye encapsulation engineering within a robust Zr-MOF (PCN-128W) containing a highly luminescent tetraphenylethylene-based ligand. The pore confinement effect well isolates the incorporated dye molecules (trans-4-[4-(Dimethylamino)styryl]-1-methylpyridinium iodide (DSM)) and therefore suppress the aggregation caused luminescence quenching. The dye emission is mainly sensitized by PCN-128W host through Förster resonance energy transfer (FRET), and the FRET process is incomplete, thus enabling the hybrid to feature dual emissions upon a single excitation. The emission color of DSM@PCN-128W hybrid can be systematically tuned from blue to white, and to orange by regulating the dye encapsulation content. A broad white-light emission with a considerably high quantum yield (21.2%) is obtained in the case of dye contents of 0.15 wt%. The luminescence of DSM@PCN-128W hybrid is stable in ambient air for over 1 month, and show good resistance to continuous UV light irradiation, owing to the protective MOF Matrix that largely inhibits the UV exposure to dye molecules. What's more, by combining DSM@PCN-128W with a commercial UV LED chip, we fabricate a white-light emitting prototype device showing CIE chromaticity coordinates of (0.34, 0.33), a CRI of 79.1, and a CCT of 5525 K.

Carbon-Based Composite Phase Change Materials for Thermal Energy Storage, Transfer, and Conversion

Phase change materials (PCMs) can alleviate concerns over energy to some extent by reversibly storing a tremendous amount of renewable and sustainable thermal energy. However, the low thermal conductivity, low electrical conductivity, and weak photoabsorption of pure PCMs hinder their wider applicability and development. To overcome these deficiencies and improve the utilization efficiency of thermal energy, versatile carbon materials have been increasingly considered as supporting materials to construct shape-stabilized composite PCMs. Despite some carbon-based composite PCMs reviews regarding thermal conductivity enhancement, a comprehensive review of carbon-based composite PCMs does not exist. Herein, a systematic overview of recent carbon-based composite PCMs for thermal storage, transfer, conversion (solar-to-thermal, electro-to-thermal and magnetic-to-thermal), and advanced multifunctional applications, including novel metal organic framework (MOF)-derived carbon materials are provided. The current challenges and future opportunities are also highlighted. The authors hope this review can provide in-depth insights and serve as a useful guide for the targeted design of high-performance carbon-based composite PCMs.

1,3-Bis(4′-carboxylatophenoxy)benzene and 3,5-bis(1-imidazoly)pyridine derived Zn(ii)/Cd(ii) coordination polymers: synthesis, structure and photocatalytic properties

Zn(ii) and Cd(ii)-based CPs derived from a 1,3-bis(4′-carboxylatophenoxy)benzene and 3,5-bis(1-imidazoly)pyridine synthesized and their photocatalytic properties for decomposition of methylene blue investigated.

Metal–organic frameworks derived from a semi-rigid anthracene-based ligand and sulfonates: proton conductivity and dye degradation studies

The MOFs were constructed by ligand AHP and sulfonate analogues. MOF4 exhibits a high proton conductivity of 1.95 × 10⁻³ S cm⁻¹ at 95 °C and 98% relative humidity. MOFs 1–5 also serve as photocatalysts for methylene blue degradation.

Efficient Regulation of Energy Transfer in a Multicomponent Dye-Loaded MOF for White-Light Emission Tuning

Owing to their rich porosity and structural diversity, metal-organic frameworks (MOFs) offer substantial advantages over other emission sources for the precise design and color regulation of white-light phosphors. However, achieving efficient white-light emission remains a considerable challenge. Herein, we report a strategy to achieve tunable and efficient white-light emission by regulating energy transfer in a multicomponent dye-loaded MOF. An anionic MOF NKU-114 featuring appropriate confined spaces is designed as a host to deliberately encapsulate three red-, green-, and blue-emissive dyes with adaptive spectral overlap, DSM, AF, and 9-AA, respectively, yielding the NKU-114@dyes composites. Integrating the suitable spectral overlap and efficient energy transfer between the dyes and the framework produced a white-light emission material containing the multicomponent dyes NKU-114@DSM/AF/9-AA. The obtained material has a broadband white emission with a high quantum yield (up to 42.07%) and nearly identical CIE coordinates of (0.34, 0.32), and the moderate correlated color temperature and color-rendering index value can reach up to 5101 K and 81, respectively, suggesting the potential of the multicomponent dye-loaded MOF for white-light-emitting phosphors with good color quality.

White Light Emission by Simultaneous One Pot Encapsulation of Dyes into One-Dimensional Channelled Aluminophosphate

By simultaneous occlusion of rationally chosen dyes, emitting in the blue, green and red region of the electromagnetic spectrum, into the one-dimensional channels of a magnesium-aluminophosphate with AEL-zeolitic type structure, MgAPO-11, a solid-state system with efficient white light emission under UV excitation, was achieved. The dyes herein selected—acridine (AC), pyronin Y (PY), and hemicyanine LDS722—ensure overall a good match between their molecular sizes and the MgAPO-11 channel dimensions. The occlusion was carried out via the crystallization inclusion method, in a suitable proportion of the three dyes to render efficient white fluorescence systems by means of fine-tuned FRET (fluorescence resonance energy transfer) energy transfer processes. The FRET processes are thoroughly examined by the analysis of fluorescence decay traces using the femtosecond fluorescence up-conversion technique.

Synthesis, characterization, self-assembly and non-ohmic Schottky barrier diode behaviors of two iron(iii) based semiconductors with theoretical insight

Schottky barrier diodes have been fabricated using two iron(iii) Schiff base complexes. The total and partial DOS values have been calculated using DFT to calculate the band gaps in these complexes.

Three Models To Encapsulate Multicomponent Dyes into Nanocrystal Pores: A New Strategy for Generating High-Quality White Light

Highly luminescent metal-organic frameworks (LMOFs) have received great attention for their potential use in energy-efficient general lighting devices such as white-light-emitting diodes (WLEDs); however, achieving strong emission with controllable color, especially high-quality white light, remains a considerable challenge. Herein, we present a new strategy to encapsulate in situ multiple dyes into nanocrystalline ZIF-8 pores to form an efficient dyes@MOF system. Using this strategy, we build three models, namely, multiphase single-shell dye@ZIF-8, single-phase single-shell dyes@ZIF-8, and single-phase multishell dyes@ZIF-8, to systematically and fine-tune the white emission color by varying the components and concentration of encapsulated dyes. The study of these three models demonstrates the importance of the multishell structure, which can effectively reduce the interactions such as Förster resonance energy transfer (FRET) between encapsulated dyes. This energy transfer would otherwise be unavoidable in a single-shell setting, which often reduces the efficiency of white-light emission in the dyes@MOF system. This approach offers a new perspective not only for fine-tuning the emission color within nanoporous dyes@MOFs but also for fabricating MOF nanocrystals that are easily solution-processable. The strategy may also facilitate the development of other types of MOF-guest nanocomposite systems.

Towards implementing hierarchical porous zeolitic imidazolate frameworks in dye-sensitized solar cells

A one-pot method for encapsulation of dye, which can be applied for dye-sensitized solar cells (DSSCs), and synthesis of hierarchical porous zeolitic imidazolate frameworks (ZIF-8), is reported. The size of the encapsulated dye tunes the mesoporosity and surface area of ZIF-8. The mesopore size, Langmuir surface area and pore volume are 15 nm, 960-1500 m² · g^-1 and 0.36-0.61 cm³ · g^-1, respectively. After encapsulation into ZIF-8, the dyes show longer emission lifetimes (greater than 4-8-fold) as compared to the corresponding non-encapsulated dyes, due to suppression of aggregation, and torsional motions.

Validation of ‘lock-and-key’ mechanism of a metal–organic framework in selective sensing of triethylamine

To develop the metal–organic framework (MOF)-based sensing of triethylamine (TEA) in an aqueous phase, Al-MIL-101-NH₂ (MIL: Material Institute Lavoisier) with a tripod-like cavity was utilized based on a lock-and-key model. Al-MIL-101-NH₂ (Al-MOF) was found to be an excellent fluorescent sensor for the TEA molecules in the range of 0.05–0.99 mM. The limit of detection (LOD) and linear calibration range of this probe towards TEA were found to be 3 μM and 0.05–0.40 mM, respectively. The mechanism of the sensing process indicates the dominant role of physical processes (e.g., non-covalent bond interactions). In addition, the exact fit of the TEA molecule (6.5 Å) in the tripod-like cavity (6.78 Å) supported the strong interaction between three ethyl groups (TEA) and aromatic rings (MOF). This kind of specific suitability between size/shape of the TEA and tripod-like cavity of MOF (ΔG: −46.7 kJ mol⁻¹) was not found in other molecules such as ethylamine (ΔG: −2.20 kJ mol⁻¹ and size: 3.7 Å), formaldehyde (ΔG: +1.50 kJ mol⁻¹ and size: 2.8 Å), and ammonia (ΔG: +0.71 kJ mol⁻¹ and size: 1.6 Å). As such, Al-MOF was found to be a selective and stable sensor for TEA.

To develop the metal–organic framework (MOF)-based sensing of triethylamine (TEA) in an aqueous phase, Al-MIL-101-NH₂ (MIL: Material Institute Lavoisier) with a tripod-like cavity was utilized based on a lock-and-key model.

Encapsulation of yellow phosphors into nanocrystalline metal–organic frameworks for blue-excitable white light emission

Anin situsynthesis strategy is developed to encapsulate blue-excitable yellow emitting dyes into metal–organic frameworks to generate white light.

High-speed colour-converting photodetector with all-inorganic CsPbBr3 perovskite nanocrystals for ultraviolet light communication

Optical wireless communication (OWC) using the ultra-broad spectrum of the visible-to-ultraviolet (UV) wavelength region remains a vital field of research for mitigating the saturated bandwidth of radio-frequency (RF) communication. However, the lack of an efficient UV photodetection methodology hinders the development of UV-based communication. The key technological impediment is related to the low UV-photon absorption in existing silicon photodetectors, which offer low-cost and mature platforms. To address this technology gap, we report a hybrid Si-based photodetection scheme by incorporating CsPbBr₃ perovskite nanocrystals (NCs) with a high photoluminescence quantum yield (PLQY) and a fast photoluminescence (PL) decay time as a UV-to-visible colour-converting layer for high-speed solar-blind UV communication. The facile formation of drop-cast CsPbBr₃ perovskite NCs leads to a high PLQY of up to ~73% and strong absorption in the UV region. With the addition of the NC layer, a nearly threefold improvement in the responsivity and an increase of ~25% in the external quantum efficiency (EQE) of the solar-blind region compared to a commercial silicon-based photodetector were observed. Moreover, time-resolved photoluminescence measurements demonstrated a decay time of 4.5 ns under a 372-nm UV excitation source, thus elucidating the potential of this layer as a fast colour-converting layer. A high data rate of up to 34 Mbps in solar-blind communication was achieved using the hybrid CsPbBr₃-silicon photodetection scheme in conjunction with a 278-nm UVC light-emitting diode (LED). These findings demonstrate the feasibility of an integrated high-speed photoreceiver design of a composition-tuneable perovskite-based phosphor and a low-cost silicon-based photodetector for UV communication.

White-Light Emitting Di-Ureasil Hybrids

White-light emitting materials have emerged as important components for solid state lighting devices with high potential for the replacement of conventional light sources. Herein, amine-functionalized organic-inorganic di-ureasil hybrids consisting of a siliceous skeleton and oligopolyether chains codoped with lanthanide-based complexes, with Eu3+ and Tb3+ ions and 4,4'-oxybis(benzoic acid) and 1,10-phenanthroline ligands, and the coumarin 1 dye were synthesized by in situ sol⁻gel method. The resulting luminescent di-ureasils show red, green, and blue colors originated from the Eu3+, Tb3+, and C1 emissions, respectively. The emission colors can be modulated either by variation of the relative concentration between the emitting centers or by changing the excitation wavelength. White light emission is achieved under UV excitation with absolute quantum yields of 0.148 ± 0.015, 0.167 ± 0.017, and 0.202 ± 0.020 at 350, 332, and 305 nm excitation, respectively. The emission mechanism was investigated by photoluminescence and UV⁻visible absorption spectroscopy, revealing an efficient energy transfer from the organic ligands to the Ln3+ ions and the organic dye, whereas negligible interaction between the dopants is discerned. The obtained luminescent di-ureasils have potential for optoelectronic applications, such as in white-light emitting diodes.

Aggregation-Induced Emission Luminogens as Color Converters for Visible-Light Communication

In this work, we report the application of the aggregation-induced emission luminogens (AIEgens) as color converters for visible light communication (VLC). In the form of pure solid powder, the AIEgens studied herein have demonstrated blue-to-red full-color emissions, large -6 dB electrical modulation bandwidths up to 279 MHz (∼56× that of commercial phosphor), and most of them can achieve high data rates of 428-493 Mbps (up to ∼49× that of commercial phosphor) at a maximum bit error rate of 3.8 × 10^-3 using on-off keying. Their data communication performances strongly suggest that AIEgens are very promising candidates as color converters for VLC applications, together with their unique AIE properties that will benefit usage in high concentration. Based on the comprehensive experimental results, we further propose some insights into improving data rate of the color converter in VLC: the data rate limit is influenced by modulation bandwidth and signal-noise ratio (SNR). We have experimentally proved that the -6 dB electrical modulation bandwidth f _c can be estimated from the effective lifetime τ of the color converter with the theoretical prediction of [Formula: see text] within experimental uncertainties, while theoretically derived that the SNR is proportional to its PL quantum efficiency. These observations and implications are very profound for exploring materials as color converters and improve the data transmission performance in VLC.

Metal–Organic Framework Hybrid Materials and Their Applications

The inherent porous nature and facile tunability of metal–organic frameworks (MOFs) make them ideal candidates for use in multiple fields. MOF hybrid materials are derived from existing MOFs hybridized with other materials or small molecules using a variety of techniques. This led to superior performance of the new materials by combining the advantages of MOF components and others. In this review, we discuss several hybridization methods for the preparation of various MOF hybrids with representative examples from the literature. These methods include covalent modifications, noncovalent modifications, and using MOFs as templates or precursors. We also review the applications of the MOF hybrids in the fields of catalysis, drug delivery, gas storage and separation, energy storage, sensing, and others.