Design of Porous/Hollow Structured Ceria by Partial Thermal Decomposition of Ce-MOF and Selective Etching

Cocatalyst Embedded Ce-BDC-CeO2 S-Scheme Heterojunction Hollowed-Out Octahedrons With Rich Defects for Efficient CO2 Photoreduction

Constructing heterojunction photocatalysts with optimized architecture and components is an effective strategy for enhancing CO2 photoreduction by promoting photogenerated carrier separation, visible light absorption, and CO2 adsorption. Herein, defect-rich photocatalysts (Ni2P@Ce-BDC-CeO2 HOOs) with S-scheme heterojunction and hollowed-out octahedral architecture are prepared by decomposing Ce-BDC octahedrons embedded with Ni2P nanoparticles and subsequent lactic acid etching for CO2 photoreduction. The hollowed-out octahedral architecture with multistage pores (micropores, mesopores, and macropores) and oxygen vacancy defects are simultaneously produced during the preparation process. The S-scheme heterojunction boosts the quick transfer and separation of photoinduced charges. The formed hollowed-out multi-stage pore structure is favorable for the adsorption and diffusion of CO2 molecules and gaseous products. As expected, the optimized photocatalyst exhibits excellent performance, producing CO with a yield of 61.6 µmol h-1 g-1, which is four times higher than that of the original Ce-BDC octahedrons. The X-ray photoelectron spectroscopy, scanning Kelvin probe, and electron spin resonance spectroscopy characterizations confirm the S-schematic charge-transfer route. The key intermediate species during the CO2 photoreduction process are detected by in situ Fourier transform infrared spectroscopy to support the proposed mechanism for CO2 photoreduction. This work presents a synthetic strategy for excellent catalysts with potential prospects in photocatalytic applications.

The Structures and Compositions Design of the Hollow Micro-Nano-Structured Metal Oxides for Environmental Catalysis

In recent decades, with the rapid development of the inorganic synthesis and the increasing discharge of pollutants in the process of industrialization, hollow-structured metal oxides (HSMOs) have taken on a striking role in the field of environmental catalysis. This is all due to their unique structural characteristics compared to solid nanoparticles, such as high loading capacity, superior pore permeability, high specific surface area, abundant inner void space, and low density. Although the HSMOs with different morphologies have been reviewed and prospected in the aspect of synthesis strategies and potential applications, there has been no systematic review focusing on the structures and compositions design of HSMOs in the field of environmental catalysis so far. Therefore, this review will mainly focus on the component dependence and controllable structure of HSMOs in the catalytic elimination of different environmental pollutants, including the automobile and stationary source emissions, volatile organic compounds, greenhouse gases, ozone-depleting substances, and other potential pollutants. Moreover, we comprehensively reviewed the applications of the catalysts with hollow structure that are mainly composed of metal oxides such as CeO2, MnOx, CuOx, Co3O4, ZrO2, ZnO, Al3O4, In2O3, NiO, and Fe3O4 in automobile and stationary source emission control, volatile organic compounds emission control, and the conversion of greenhouse gases and ozone-depleting substances. The structure-activity relationship is also briefly discussed. Finally, further challenges and development trends of HSMO catalysts in environmental catalysis are also prospected.

Applications of cerium-based materials in food monitoring

With the rapid development of society, food safety to public health has been a topic that cannot be ignored. In recent years, lanthanide-based materials are studied to be potential candidates in the detection of food samples. Cerium (Ce)-based materials (such as Ce ions, CeO2, Ce-metal organic framework (Ce-MOF), etc.) have also attracted more attention in food detection by virtue of colorimetric, fluorescence, sensing, and other methods. This is because the mixed valence of Ce (Ce3+ and Ce4+), the formation of oxygen vacancies, and their optical and electrochemical properties. In this review, Ce-based materials will be introduced and discussed in the field of food detection, including biogenesis, construction, catalytic mechanisms, combination, and applications. In addition, the current challenges and future development trend of these Ce-based materials in food safety detection are also proposed and discussed. Therefore, it is meaningful to explore the Ce-based materials for detection of biomarkers in food samples.

Multifunctional bimetallic MOF with oxygen vacancy synthesized by microplasma for rapid total antioxidant capacity assessment in agricultural products

The assessment of total antioxidant capacity (TAC) is crucial for evaluating overall antioxidant potential, predicting the risk of chronic diseases, guiding dietary and nutritional interventions, and studying the effectiveness of antioxidants. However, achieving rapid TAC assessment with high sensitivity and stability remains a challenge. In this study, Ce/Fe-MOF with abundant oxygen vacancies was synthesized using microplasma for TAC determination. The microplasma synthesis method was rapid (30 min) and cost-effective. The presence of oxygen vacancies and the collaboration between iron and cerium in Ce/Fe-MOF not only enhanced the catalyst's efficiency but also conferred multiple enzyme-like properties: peroxidase-like, oxidase-like, and superoxide dismutase mimetic activities. Consequently, a simple colorimetric assay was established for TAC determination in vegetables and fruits, featuring a short analysis time of 15 min, a good linear range of 5-60 μM, a low detection limit of 1.3 μM and a good recovery of 91 %-107 %. This method holds promise for rapid TAC assessment in agricultural products.

Efficient removal of hexavalent chromium by nano-cerium-based adsorbent: The critical role of valence state and oxygen vacancy

Cerium-based adsorbents have been gradually used for the adsorption removal of highly toxic Cr(VI) from wastewater due to their low toxicity and wide working pH. However, the intrinsic properties of adsorbents contribute significantly to their adsorption performance, and the relationship between them needs to be clarified. Herein, series of nano-cerium based adsorbents (Ce@Cs) with different surface defects and Ce(III) content were prepared to explore their effects on the Cr(VI) adsorption capacity. Results showed that the optimal Ce@C performed well over a wide pH range of 2.0-12.0, and the calculated Cr(VI) adsorption capacity reached 302.43 mg/g at 45 ℃. Ce(III) and surface defects in cerium-based adsorbents exhibited an important influence on the Cr(VI) adsorption performance of Ce@Cs, and their contents showed a good positive correlation with the Cr adsorption capacity (R2 =0.988 and 0.827). A series of evidences confirmed that the generated Ce(III) and oxygen vacancies could provide more sufficient coordination number to promote Cr(VI) complexation with Ce@Cs and lower the impedance of Ce@Cs to improve the reduction of Cr(VI) to low-toxic Cr(III). This work provides new insights into the Cr(VI) adsorption using cerium-based adsorbents, which helps to improve their potential in the purification of Cr(VI)-containing wastewater.

Rare earth oxide based electrocatalysts: synthesis, properties and applications

As an important strategic resource, rare earths (REs) constitute 17 elements in the periodic table, namely 15 lanthanides (Ln) (La-Lu, atomic numbers from 57 to 71), scandium (Sc, atomic number 21) and yttrium (Y, atomic number 39). In the field of catalysis, the localization and incomplete filling of 4f electrons endow REs with unique physical and chemical properties, including rich electronic energy level structures, variable coordination numbers, etc., making them have great potential in electrocatalysis. Among various RE catalytic materials, rare earth oxide (REO)-based electrocatalysts exhibit excellent performances in electrocatalytic reactions due to their simple preparation process and strong structural variability. At the same time, the electronic orbital structure of REs exhibits excellent electron transfer ability, which can reduce the band gap and energy barrier values of rate-determining steps, further accelerating the electron transfer in the electrocatalytic reaction process; however, there is a lack of systematic review of recent advances in REO-based electrocatalysis. This review systematically summarizes the synthesis, properties and applications of REO-based nanocatalysts and discusses their applications in electrocatalysis in detail. It includes the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), hydrogen oxidation reaction (HOR), oxygen reduction reaction (ORR), carbon dioxide reduction reaction (CO2RR), methanol oxidation reaction (MOR), nitrogen reduction reaction (NRR) and other electrocatalytic reactions and further discusses the catalytic mechanism of REs in the above reactions. This review provides a timely and comprehensive summary of the current progress in the application of RE-based nanomaterials in electrocatalytic reactions and provides reasonable prospects for future electrocatalytic applications of REO-based materials.

Yolk-shell composite optical sensors with chiral L-histidine/Rhodamine 6G for high-sensitivity "turn-on" detection of L-proline

Chirality is a ubiquitous phenomenon in nature and has attracted wide attention in the biomedicine, pharmaceutics and biosensing research fields. Enantiomeric recognition of chiral compounds, especially chiral drugs and chiral amino acids, is important for human health and nutrition. In this work, through the encapsulation of L-His&R6G (L-His = L-Histidine; R6G = Rhodamine 6G) into MOF@MOF framework ZIF-67@ZIF-8, composited material L-His&R6G@ZIF-67@ZIF-8 can be obtained. Additionally, through the etching process, a unique yolk-shell ZIF-8 chiral composite optical sensors L-His&R6G@ZIF-8 (1) can be successfully prepared. Photo-luminescent (PL) experiment also reveals that 1 can highly sensitively detect L-Proline (L-Pro) through the "turn-on" detection strategy (KBH = 1.22 × 104 M-1 and detection limit 1.9 μM). Further yolk-shell L-His&R6G@ZIF-8-based fabricate flexible mixed-matrix membranes has been prepared using doctor-blading technique, which show significant fluorescence enhancement effect under ultraviolet lamp. This work also provides the unique example of preparing chiral yolk-shell framework composite sensors, which have broad application in chiral sensing area.

Aptamer-modified metal organic frameworks for measurement of food contaminants: a review

The measurement of food contaminants faces a great challenge owing to the increasing demand for safe food, increasing consumption of fast food, and rapidly changing patterns of human consumption. As different types of contaminants in food products can pose different levels of threat to human health, it is desirable to develop specific and rapid methods for their identification and quantification. During the past few years, metal-organic framework (MOF)-based materials have been extensively explored in the development of food safety sensors. MOFs are porous crystalline materials with tunable composition, dynamic porosity, and facile surface functionalization. The construction of high-performance biosensors for a range of applications (e.g., food safety, environmental monitoring, and biochemical diagnostics) can thus be promoted through the synergistic combination of MOFs with aptamers. Accordingly, this review article delineates recent innovations achieved for the aptamer-functionalized MOFs toward the detection of food contaminants. First, we describe the basic concepts involved in the detection of food contaminants in terms of the advantages and disadvantages of the commonly used analytical methods (e.g., DNA-based methods (PCR/real-time PCR/multiplex PCR/digital PCR) and protein-based methods (enzyme-linked immunosorbent assay/immunochromatography assay/immunosensor/mass spectrometry). Afterward, the progress in aptamer-functionalized MOF biosensors is discussed with respect to the sensing mechanisms (e.g., the role of MOFs as signal probes and carriers for loading signal probes) along with their performance evaluation (e.g., in terms of sensitivity). We finally discuss challenges and opportunities associated with the development of aptamer-functionalized MOFs for the measurement of food contaminants.

Performance and mechanism of phosphorus adsorption removal from wastewater by a Ce-Zr-Al composite adsorbent

With the increasingly serious eutrophication of global water bodies and the strict discharge standards of tail water in wastewater treatment plants (WWTPs), there is an urgent technology need for efficient deep phosphorus removal from wastewater. A composite cerium-based adsorbent (Ce-Zr-Al) was synthesized by coprecipitation method for the adsorption of low concentration phosphorus in water. The performance of the Ce-Zr-Al composite adsorbent was explored, and the mechanism was also revealed through the analyses including SEM, BET, XPS, and FT-IR. The results showed that the composite adsorbent had excellent phosphorus removal performance. The phosphorus removal rate reached up to 92.6%, and the phosphorus concentration in effluent was less than 0.074 mg/L. The phosphate adsorption capacity of saturation was 73.51 mg/g. The adsorption process of phosphate was in accordance with pseudo-second-order kinetic model and Langmuir model. In addition, the composite adsorbent had a high zero potential point (pH _PZC= 8) and a wide range of pH application. After the repeated desorption for 10 times in NaOH solution, the composite adsorbent still maintained good adsorbability (adsorption rate > 94%). The ligand exchange and electrostatic adsorption played the main role for the phosphorus removal from water using the composite adsorbent.

An electrochemical sensor based on Ce-MOF-derived Ce-doped poly(3,4-ethylenedioxythiophene) composite for efficient determination of rutin in food

As a common antioxidant and nutritional fortifier in food chemistry, rutin has positive therapeutic effects against novel coronaviruses. Here, Ce-doped poly(3,4-ethylenedioxythiophene) (Ce-PEDOT) nanocomposites derived through cerium-based metal-organic framework (Ce-MOF) as a sacrificial template have been synthesized and successfully applied to electrochemical sensors. Due to the outstanding electrical conductivity of PEDOT and the high catalytic activity of Ce, the nanocomposites were used for the detection of rutin. The Ce-PEDOT/GCE sensor detects rutin over a linear range of 0.02-9 μM with the limit of detection of 14.7 nM (S/N = 3). Satisfactory results were obtained in the determination of rutin in natural food samples (buckwheat tea and orange). Moreover, the redox mechanism and electrochemical reaction sites of rutin were investigated by the CV curves of scan rate and density functional theory. This work is the first to demonstrate the combined PEDOT and Ce-MOF-derived materials as an electrochemical sensor to detect rutin, thus opening a new window for the application of the material in detection.

Interfacial Reaction-Directed Green Synthesis of CeO2-MnO2 Catalysts for Imine Production through Oxidative Coupling of Alcohols and Amines

Direct oxidative coupling of alcohols with amines over cheap but efficient catalysts is a promising choice for imine formation. In this study, porous CeO₂-MnO₂ binary oxides were prepared via an interfacial reaction between Ce₂(SO₄)₃ and KMnO₄ at room temperature without any additives. The as-prepared porous CeO₂-MnO₂ catalyst has a higher fraction of Ce³⁺, Mn³⁺, and Mn⁴⁺ and contains larger surface area and more oxygen vacancies. During the oxidative coupling reaction of alcohol with amine to imine, the as-obtained CeO₂-MnO₂ catalyst is motivated by the above encouraging characteristics and exhibits superior catalytic activity (98% conversion and 97% selectivity) and can also work effectively under a wide scope of temperatures and substrates. The in-depth in situ DRIFTS and density functional theory (DFT) results demonstrate that there is a strong interaction between CeO₂ and MnO₂ in the CeO₂-MnO₂ catalyst, exhibiting especially a positive synergistic effect in the direct coupling of alcohol and amine reaction.

Structure-performance correlation guided cerium-based metal-organic frameworks: Superior adsorbents for fluoride removal in water

Fluoride in the hydrosphere exceeds the standard, which could be critically hazardous to human health and the natural environment. The adsorption method is a mature and effective way to remove pollutants in water, including fluoride. In this study, we synthesized three kinds of cerium-based metal-organic frameworks (Ce-MOFs) with different structures and properties by modulating the organic ligands (i.e., trimesic acid (BTC), 1,2,4,5-benzenetetracarboxylic acid (PMA), and terephthalic acid (BDC)) via the solvothermal method. The adsorption kinetics of Ce-MOFs on fluoride well fit the pseudo second order model, and their adsorption isotherms also conform to Langmuir isothermal model. The thermodynamic study reveals that the adsorption process is a spontaneous endothermic reaction. The maximum saturated adsorption capacities of Ce-BTC, Ce-PMA, and Ce-BDC are 70.7, 159.6, and 139.5 mg g^-1, respectively. Ce-MOFs have stable and excellent adsorption capacity at pH = 3-9. Coexisting anions (Cl^-, SO₄^2-, and NO₃^-) do not affect the performance of Ce-MOFs for fluoride removal. Moreover, Ce-MOFs also show their broad prospect as superior fluoride adsorbents because of their excellent performance and reusability in real water samples. Organic ligands have a remarkable influence on the defluoridation performance of Ce-MOFs. This work will provide a feasible idea for designing MOFs as superiors adsorbents for defluoridation.

A simple method for the preparation of CeO2with high antioxidant activity and wide application range

Cerium oxide (CeO₂) is a well-known antioxidant with the ability to scavenge reactive oxygen species due to its unique electronic structure and chemical properties. Although many methods to enhance the antioxidant activity of CeO₂have been reported, its antioxidant activity is still not high enough, and some enhancement effects are limited by the material concentration. There are also some CeO₂obtained with high antioxidant activity at high concentrations, which is not conducive to the application of biomedicine. Therefore, it is urgent to obtain CeO₂material with low cell cytotoxicity, high antioxidant activity and wide application range. In this work, rod-like metal organic framework derived CeO₂(CeO₂-MOF) was prepared by a simple method. Compared with the CeO₂nanorods prepared by hydrothermal method, it shows better antioxidant activity compared with the CeO₂nanorods prepared by hydrothermal method. Moreover, the advantage of CeO₂-MOF's antioxidant activity is not affected by the hydroxyl radical and material concentrations The reason why CeO₂-MOF has higher antioxidant activity should be attributed to its higher Ce³⁺content and larger specific surface area. In addition, CeO₂-MOF also exhibits low cytotoxicity to HeLa cells and PC12 cellsin vitro. The strategy of using MOF as a structural and compositional material to create CeO₂provides a new method to explore highly efficient and biocompatible CeO₂for practical applications.

The modification of biomass waste by cerium-based MOFs for efficient phosphate removal: excellent performance and reaction mechanism

Due to the possibility of causing eutrophication, excessive phosphate discharged into water bodies always threatens the stabilization of aquatic ecosystem. A promising strategy is to remove phosphate from water by the utilization of biomass waste as adsorbents. In this paper, the corn straw (CS) and pine sawdust (PS) are chosen for adsorption; however, the phosphate removal capacities of them are very limited. Considering the high phosphate uptake of trivalent cerium, Ce (III)-based nanoparticles (CD and CT) are selected to be loaded on the biomass by hydrothermal synthesis to obtain four modified materials. CD is metal organic frameworks (MOFs) with Ce5(BDC)7.5(DMF)4 as its molecular structure, while CT is MOFs derivatives with [Ce (HCOO)]n as its crystal structure. The adsorption capacities of CS-CD, PS-CD, CS-CT and PS-CT reach 181.38, 183.27, 225.55 and 186.23 mg/g. But on account of the different molecular structures, CS-CD and PS-CD achieve great phosphate uptake under wide applicable scope of pH from 2 to 11, whereas CS-CT and PS-CT only under acidic conditions. The analysis of the adsorption mechanism indicates that due to the unsaturated coordination bond of CD, it could remove phosphate through coprecipitation and ion exchange even under alkaline conditions.

Metal-organic framework nanocrystal-derived hollow porous materials: Synthetic strategies and emerging applications

Metal-organic frameworks (MOFs) have garnered multidisciplinary attention due to their structural tailorability, controlled pore size, and physicochemical functions, and their inherent properties can be exploited by applying them as precursors and/or templates for fabricating derived hollow porous nanomaterials. The fascinating, functional properties and applications of MOF-derived hollow porous materials primarily lie in their chemical composition, hollow character, and unique porous structure. Herein, a comprehensive overview of the synthetic strategies and emerging applications of hollow porous materials derived from MOF-based templates and/or precursors is given. Based on the role of MOFs in the preparation of hollow porous materials, the synthetic strategies are described in detail, including (1) MOFs as removable templates, (2) MOF nanocrystals as both self-sacrificing templates and precursors, (3) MOF@secondary-component core-shell composites as precursors, and (4) hollow MOF nanocrystals and their composites as precursors. Subsequently, the applications of these hollow porous materials for chemical catalysis, electrocatalysis, energy storage and conversion, and environmental management are presented. Finally, a perspective on the research challenges and future opportunities and prospects for MOF-derived hollow materials is provided.

•

MOFs have garnered multi-disciplinary attention due to their unique inherent properties

•

Various synthetic strategies of MOFs-derived hollow porous materials are summarized

•

Emerging applications of MOFs-derived hollow porous materials are reviewed

Electrified nanohybrid filter for enhanced phosphorus removal from water

Phosphorus (P) has been identified as a major cause of eutrophication. One feasible way to deal with P-containing wastewater is to employ advanced adsorbents with high P affinity. Towards this end, the loading of these sorbents onto a conductive scaffold would facilitate the introduction of an electric field into the reaction system thereby permitting a continuous-flow operation and improved P sorption kinetics. Here, the preparation and evaluation of an electroactive carbon nanotube (CNT) filter functionalized with cerium-based metal organic frameworks (Ce-MOF) is reported. Various advanced characterization techniques confirmed the successful fabrication of the Ce-MOF/CNT nanohybrid filter. The results suggested that the nanohybrid filter had a maximum P adsorption capacity of 22.41 mg g^-1, which compared favorably with other state-of-the-art P sorbents. Ce-MOF loading, applied voltage and flow rate each increased the rate constants for phosphate removal by factors of 1.6, 2.1 and 5.8 times relative to the absent states. The underlying P sorption mechanisms involved outer-sphere surface complexation (electrostatic attraction), inner-sphere surface complexation (Ce-O-P) and diffusion. The performance was tolerant of a wide operational pH range and different water matrices. The Ce-MOF/CNT electrochemical filter described in this study provides a viable strategy to address the challenging issues associated with aqueous P pollution.

Assembly of Hydrophobic ZIF-8 on CeO2 Nanorods as High-Efficiency Catalyst for Electrocatalytic Nitrogen Reduction Reaction

The electrocatalytic nitrogen reduction reaction (NRR) can use renewable electricity to convert water and N2 into NH3 under normal temperature and pressure conditions. However, due to the competitiveness of the hydrogen evolution reaction (HER), the ammonia production rate (RNH3) and Faraday efficiency (FE) of NRR catalysts cannot meet the needs of large-scale industrialization. Herein, by assembling hydrophobic ZIF-8 on a cerium oxide (CeO2) nanorod, we designed an excellent electrocatalyst CeO2-ZIF-8 with intrinsic NRR activity. The hydrophobic ZIF-8 surface was conducive to the efficient three-phase contact point of N2 (gas), CeO2 (solid) and electrolyte (liquid). Therefore, N2 is concentrated and H+ is deconcentrated on the CeO2-ZIF-8 electrocatalyst surface, which improves NRR and suppresses HER and finally CeO2-ZIF-8 exhibits excellent NRR performance with an RNH3 of 2.12 μg h-1 cm-2 and FE of 8.41% at -0.50 V (vs. RHE). It is worth noting that CeO2-ZIF-8 showed excellent stability in the six-cycle test, and the RNH3 and FE variation were negligible. This study paves a route for inhibiting the competitive reaction to improve the NRR catalyst activity and may provide a new strategy for NRR catalyst design.

Roles of Oxygen Species in Low-Temperature Catalytic o-Xylene Oxidation on MOF-Derived Bouquetlike CeO2

To realize efficient low-temperature catalytic o-xylene oxidation, MOF-derived CeO₂-X catalysts were prepared via the pyrolysis of MOF precursors with different ratios of cerium nitrate to trimesic acid. Among the synthesized catalysts, the bouquet like CeO₂-1 exhibited the best activity with T₅₀ and T₉₀ of 156 and 198 °C and the lowest activation energy of 60.67 kJ·mol^-1 (WHSV= 48 000 mL·g^-1·h^-1, o-xylene concentration = 500 ppm). o-Xylene was completely mineralized, and no change in conversion efficiency or CO₂ yield was found at 5 vol % H₂O for over 50 h. The rich active oxygen species (XPS: O_sur/O_latt = 0.69) and abundant oxygen vacancies (Raman: I_D/I_F2g = 0.036) of CeO₂-1 made crucial contribution to its superior catalytic activity. The O₂-TPD and H₂-TPR results confirmed that CeO₂-1 had more surface active oxygen and better mobility of bulk oxygen. Moreover, the reaction routes under different atmospheres were probed through in situ DRIFTS, in which oxygen vacancy played a key role in promoting the adsorption and activation of molecular oxygen and facilitating the migration of the bulk lattice oxygen.

Metal organic frameworks as advanced functional materials for aptasensor design

BACKGROUND

Advancement in coordination chemistry has achieved an impressive development of metal organic frameworks (MOFs) as the supramolecular hybrid materials, comprising harmonized metal nodes with organic ligands. Scope and approach: MOFs offer the unique properties of easy synthesis, nanoscale structure, adjustable size and morphology, high porosity, large surface area, supreme chemical tunability and stability, and biocompatibility. The features provide an exceptional opportunity for the widely usage of MOFs in the different scientific fields, e.g. biomedicine, electrocatalysis, food safety, energy storage, environmental surveillance, and biosensing platforms. The synergistic incorporation of the aptamer advantages and the superiorities of MOFs attains the novel MOF-based aptasensors. The excellent selectivity and sensitivity of the MOF-based aptasensors nominate them as efficient lab-on-chip tools for cost-effective, label-free, portable, and real-time monitoring of diverse targets.

KEY FINDINGS AND CONCLUSIONS

Here, we review the achievements in the sensor design by cooperation of MOF motifs and aptamers with the conspicuous potential of determining the targets. Finally, some results are expressed that provide a valuable viewpoint for developing the novel MOF-based test strips in the future.

Efficient ABEI-Dissolved O2-Ce(III, IV)-MOF Ternary Electrochemiluminescent System Combined with Self-Assembled Microfluidic Chips for Bioanalysis

A signal-amplified electrochemiluminescent (ECL) sensor chip was developed for sensitive analysis of procalcitonin (PCT). Herein, we first prepared a self-enhanced luminophore, which enhanced ECL responses through intramolecular reactions. Second, Au-Pd bimetallic nanocrystals and mixed-valence Ce-based metal-organic frameworks (MOFs) were introduced as co-reaction promoters to facilitate the reduction of dissolved O₂. Based on the synergistic catalysis of Au and Pd, the spontaneous cyclic reaction of Ce(III)/Ce(IV), and the high electrochemical active surface area of Ce(III, IV) MOF, a large number of superoxide anion radicals (O₂^•-) and hydroxyl radicals (OH^•) were produced. Therefore, the luminescence efficiency of N-(aminobutyl)-N-(ethylisoluminol)-dissolved O₂ (ABEI-O₂) systems were greatly improved, providing a new prospect for the application of dissolved O₂ in ECL analysis. In addition, the affinity peptide ligands were used for the directional connection of antibodies to provide protection for the bioactivity of the proposed sensor. Finally, the microfluidic technology was applied to ECL analysis to integrate the three-electrode detection system into the self-assembled microfluidic chip, which realized the automation and portability of the detection process. The developed sensor showed high sensitivity for PCT detection with a detection limit of 3.46 fg/mL, which possessed positive significance for the clinical diagnosis of sepsis.

Metal-organic frameworks as a good platform for the fabrication of multi-metal nanomaterials: design strategies, electrocatalytic applications and prospective

MOF-derived multi-metal nanomaterials are attracting numerous attentions in widespread applications such as catalysis, sensors, energy storage and conversion, and environmental remediation. Compared to the monometallic counterparts, the presence of foreign metal is expected to bring new physicochemical properties, thus exhibiting synergistic effect for enhanced performance. MOFs have been proved as a good platform for the fabrication of polymetallic nanomaterials with requisite features. Herein, various design strategies related to constructing multi-metallic nanomaterials from MOFs are summarized for the first time, involving metal nodal substitution, seed epitaxial growth, ion-exchange strategy, guest species encapsulation, solution impregnation and combination with extraneous substrate. Afterwards, the recent advances of multi-metallic nanomaterials for electrocatalytic applications, including oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), are systematically discussed. Finally, a personal outlook on the future trends and challenges are also presented with hope to enlighten deeper understanding and new thoughts for the development of multi-metal nanomaterials from MOFs.

UiO-67 decorated on porous carbon derived from Ce-MOF for the enrichment and fluorescence determination of glyphosate

A nanocomposite was prepared by loading UiO-67 nanoparticles onto porous carbon materials derived from Ce-MOF (Ce-PC) for fluorescence detection of glyphosate. The probe (UiO-67/Ce-PC) exhibits fluorescence emission at 414 nm as the response signal under excitation at 310 nm. The fluorescence enhancement mode of UiO-67 reduces the background interference, and the introduction of Ce-PC provide hierarchical nanostructure and large specific surface area that can increase the contact availability and improve the pre-enrichment effect, ensuring UiO-67/Ce-PC with superior sensitivity. The abundant metal hydroxyl group (M-O-H) of UiO-67/Ce-PC could recognize phosphoryl groups (-PO₃H₂) of glyphosate through ligand exchange, which synergizes with H-bonding interaction and electrostatic attraction to exhibit specificity toward glyphosate. The competitive coordination effects weaken the ligand-to-metal charge transfer (LMCT) and consequently induce the fluorescence recovery. The calibration plot of the fluorescence enhancement response of UiO-67/Ce-PC towards glyphosate was recorded in the range 0.02-30 μg mL^-1 with a low limit of detection (LOD) of 0.0062 μg mL^-1, which is superior to the pure UiO-67. In addition, the sensor exhibited high selectivity and satisfactory accuracy and precision with recoveries of 92.1-105.6% and RSDs below 3.4%. This work not only presents a feasible sensor for sensitive and selective determination of glyphosate from cereal samples, but also provides a promising strategy for the design of MOF-based nanocomposites to achieve trace detection of various pollutants.

Oxygen-Powered Flower-like FeMo6@CeO2 Self-cascade Nanozyme: Turn-on Enhancement Fluorescence Sensor

Enzyme cascade reactions in organisms have sparked tremendous interest for their coupled catalysis-facilitated efficient biochemical reactions. However, multi-enzyme cascade nanozymes remain largely unpracticed. In the work, flower-like porous ceria-based integrated...

Comparative Study on the Flame Retardancy and Retarding Mechanism of Rare Earth (La, Ce, and Y)-Based Organic Frameworks on Epoxy Resin

In this work, a series of rare earth-based metal-organic frameworks (RE-MOFs) with the same organic ligand were synthesized and studied as flame retardants on epoxy. Through thermogravimetric analysis, limiting oxide index, UL-94, and cone calorimeter tests, a Y-based MOF (Y-MOF) showed the best flame retardancy compared with a La-based MOF (La-MOF) and Ce-based MOF (Ce-MOF). Further research with Raman, X-ray photoelectron spectroscopy, and theoretical calculation revealed that the reasons for the different flame retardance performances of RE-MOFs resulted from the catalytic carbonizing abilities and the radical-trapping abilities of La, Ce, and Y.

Ce-based heterogeneous catalysts by partial thermal decomposition of Ce-MOFs in activation of peroxymonosulfate for the removal of organic pollutants under visible light

Metal-organic framework (MOF) derivatives have drawn considerable attention for applications in various fields. In this work, spindle-shaped Ce-TCPPs were assembled by a rapid microwave-assisted hydrothermal method. After thermal treatment at low temperature under a N₂ atmosphere, the Ce-TCPPs were partially pyrolyzed and converted to a novel CeO₂/N-doped carbon/Ce-TCPP nanocomposite. Compared to completely decomposed materials, these partially decomposed heterogeneous catalysts exhibited significantly higher photocatalytic activation ability toward PMS for the removal of organic pollutants (e.g., rhodamine B, methylene blue, methyl orange, tetracycline and oxytetracycline). For the optimized sample thermal treated at 450 °C, a 100 mL RhB solution (10 mg/L) can be removed within 20 min with the assistance of PMS under visible light. The significantly enhanced activity can be attributed to the effective spatial separation of photogenerated electrons and holes in the formed Z-scheme CeO₂/N-doped carbon/Ce-TCPP system. This work may provide useful guidance for the design and fabrication of MOF-derived photocatalytic systems for environmental remediation.

Biomimetic Synthesis of Ultrafine Mixed-Valence Metal-Organic Framework Nanowires and Their Application in Electrochemiluminescence Sensing

Metal-organic frameworks (MOFs) prepared via typical procedures tend to exhibit issues like poor water stability and poor conductivity, which hinder their application in electrochemical sensing. Herein, we report a strategy for the preparation of mixed-valence ultrafine one-dimensional Ce-MOF nanowires based on a micelle-assisted biomimetic route and subsequent investigation into their growth mechanism. The prepared mixed-valence Ce-MOF nanowires exhibited a typical size of ∼50 nm and were found to present good water stability and high conductivity. On this basis, we examined the introduction of these nanowires into the luminol hydrogen peroxide luminescence system and proposed a novel dual-route self-circulating electrochemiluminescence (ECL) catalytic amplification mechanism. Finally, in combination with molecular imprinting, a MOF-based ECL sensor was developed for the detection of trace amounts of imidacloprid in plant-derived foods. This sensor exhibited a linearity of 2-120 nM and a detection limit of 0.34 nM. Thus, we proposed not only a novel route to MOF downsizing but also a facile and robust methodology for the design of a MOF-based molecular imprinting ECL sensor.

Ratiometric fluorescence for sensitive detection of phosphate species based on mixed lanthanide metal organic framework

Phosphate (PO₄^3-) plays a major role in aquatic ecosystems and biosystems. Developing a highly sensitive and selective ratiometric fluorescence probe for detection of PO₄^3- is of great significance to the ecological environment and human health. In this work, a novel dual lanthanide metal organic framework was synthesized via hydrothermal reaction based on Tb³⁺ and Ce³⁺ as the center metal ions and terephthalic acid as the organic ligand (designated as Tb-Ce-MOFs). The fluorescence of Tb-Ce-MOFs shows emission at 375 nm. In the presence of PO₄^3-, with increased concentration of PO₄^3-, the fluorescence intensity of Tb-Ce-MOFs at 500 nm and 550 nm increased, while the intensity at 375 nm was reduced. Hence, ratiometric fluorescence detecting of PO₄^3- can be achieved by measuring the ratio of fluorescence at 550 nm (FL₅₅₀) to 375 nm (FL₃₇₅) in the fluorescent spectra of the Tb-Ce-MOFs. In this sensing approach, the Tb-Ce-MOFs probe exhibits highly sensitive and selective for detection of PO₄^3-. The limit of detection is calculated to be 28 nM and the detection range is 0.1 to 10 μM. In addition, the Tb-Ce-MOFs were used in the detection of PO₄^3- in real samples. We design and synthesize a mixed lanthanide metal organic framework fluorescence probe (Tb-Ce-MOFs) for ratiometric fluorescence for the detection of PO₄^3- based on Tb³⁺ and Ce³⁺ as the center metal ions and terephthalic acid as the organic ligand.

Amperometric galectin-3 immunosensor-based gold nanoparticle-functionalized graphitic carbon nitride nanosheets and core-shell Ti-MOF@COFs composites

Antigen galectin-3 (GL-3), a member of β-galactoside proteins indicates cardiac fibrosis and is a significant biomarker for monitoring heart failure risk and death risk. In this study, a novel sensitive amperometric method for antigen GL-3 detection is developed based on gold nanoparticle-functionalized graphitic carbon nitride nanosheets (g-C₃N₄@Au NPs) as the sensor platform and Ti-based metal organic framework (Ti-MOF, NH₂-MIL-125)@covalent organic frameworks (COFs) composite for the signal amplification. The Ti-MOF@COF composite not only facilitates the penetration of antibody proteins into pore channels, but also the highly stable antigen-antibody interactions. The prepared sensor platform and signal amplification material are characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD) method, X-ray photoelectron spectroscopy (XPS), UV-vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The amperometric technique is utilized to achieve antigen GL-3 detection in plasma samples. The immunosensor demonstrates a wide linearity range (0.0001-20.0 ng mL^-1) and a low detection limit (0.025 pg mL^-1). Finally, the prepared immunosensor shows high stability and selectivity under optimum conditions.

Destruction of Metal-Organic Frameworks: Positive and Negative Aspects of Stability and Lability

Metal-organic frameworks (MOFs), constructed from organic linkers and inorganic building blocks, are well-known for their high crystallinity, high surface areas, and high component tunability. The stability of MOFs is a key prerequisite for their potential practical applications in areas including storage, separation, catalysis, and biomedicine since it is essential to guarantee the framework integrity during utilization. However, MOFs are prone to destruction under external stimuli, considerably hampering their commercialization. In this Review, we provide an overview of the situations where MOFs undergo destruction due to external stimuli such as chemical, thermal, photolytic, radiolytic, electronic, and mechanical factors and offer guidelines to avoid unwanted degradation happened to the framework. Furthermore, we discuss possible destruction mechanisms and their varying derived products. In particular, we highlight cases that utilize MOF instability to fabricate varying materials including hierarchically porous MOFs, monolayer MOF nanosheets, amorphous MOF liquids and glasses, polymers, metal nanoparticles, metal carbide nanoparticles, and carbon materials. Finally, we provide a perspective on the utilization of MOF destruction to develop advanced materials with a superior hierarchy for various applications.

Template Synthesis of Porous Ceria-Based Catalysts for Environmental Application

Porous oxide materials are widely used in environmental catalysis owing to their outstanding properties such as high specific surface area, enhanced mass transport and diffusion, and accessibility of active sites. Oxides of metals with variable oxidation state such as ceria and double oxides based on ceria also provide high oxygen storage capacity which is important in a huge number of oxidation processes. The outstanding progress in the development of hierarchically organized porous oxide catalysts relates to the use of template synthetic methods. Single and mixed oxides with enhanced porous structure can serve both as supports for the catalysts of different nature and active components for catalytic oxidation of volatile organic compounds, soot particles and other environmentally dangerous components of exhaust gases, in hydrocarbons reforming, water gas shift reaction and photocatalytic transformations. This review highlights the recent progress in synthetic strategies using different types of templates (artificial and biological, hard and soft), including combined ones, in the preparation of single and mixed oxide catalysts based on ceria, and provides examples of their application in the main areas of environmental catalysis.

CeO2-Supported Pt Catalysts Derived from MOFs by Two Pyrolysis Strategies to Improve the Oxygen Activation Ability

Functional metal organic framework (MOF) derivatives have attracted tremendous attention as promising catalysts for various reactions. The thermal decomposition strategies have a vital effect on the structures and physicochemical properties of functional MOF derivatives. Nevertheless, what effect does the pyrolysis strategy have on MOF derivatives need further study. In this work, one-step (under dry air) and two-step (first under N₂ and then dry air) pyrolysis are chosen to prepare the functional ceria-based MOF derivatives with novel hierarchical pore structure. In comparison with the derivatives prepared by one-step pyrolysis, the two-step pyrolysis composites exhibit better catalytic activity for toluene oxidation due to the higher contents of surface absorbed oxygen species and surface oxygen vacancies. The reusability and durability test demonstrates perfect stability of such functional MOF derivatives. The in-situ UV Raman reveals that two-step strategy is favorable for enhancing the gaseous oxygen activation ability of the functional MOF derivatives. Those findings may instruct the synthesis of functional MOF derivatives via different pyrolysis strategies as well as afford a further understanding of the crucial role of oxygen vacancies.

Recent advances in synergistic effect promoted catalysts for preferential oxidation of carbon monoxide

We reviewed recent advances in catalysts for PROX with emphasis on synergistic effects that contribute to enhanced catalytic performance.

Hollow Micro/Nanostructured Ceria-Based Materials: Synthetic Strategies and Versatile Applications

Hollow micro/nanostructured CeO₂ -based materials (HMNCMs) have triggered intensive attention as a result of their unique structural traits, which arise from their hollowness and the fascinating physicochemical properties of CeO₂ . This attention has led to widespread applications with improved performance. Herein, a comprehensive overview of methodologies applied for the synthesis of various hollow structures, such as hollow spheres, nanotubes, nanoboxes, and multishelled hollow spheres, is provided. The synthetic strategies toward CeO₂ hollow structures are classified into three major categories: 1) well-established template-assisted (hard-, soft-, and in situ template) methods; 2) newly emerging self-template approaches, including selective etching, Ostwald ripening, the Kirkendall effect, galvanic replacement, etc.; 3) bottom-up self-organized formation synthesis (namely, oriented attachment and self-deformation). Their underlying mechanisms are concisely described and discussed in detail, the differences and similarities of which are compared transversely and longitudinally. Niche applications of HMNCMs in a wide range of fields including catalysis, energy conversion and storage, sensors, absorbents, photoluminescence, and biomedicines are reviewed. Finally, an outlook of future opportunities and challenges in the synthesis and application of CeO₂ -based hollow structures is also presented.

Insights into the Pyrolysis Processes of Ce-MOFs for Preparing Highly Active Catalysts of Toluene Combustion

Metal organic frameworks (MOFs) have recently been used as precursors of the catalysts for the combustion of volatile organic compounds (VOCs). In the present work, three kinds of CeO2 catalysts were successfully synthesized from Ce-MOF-808, Ce-BTC, and Ce-UiO-66, with specific topological structures and coordinate environments. Catalysts with small particle size, stacking mode, and structural defects could be created by pyrolysis of Ce-MOFs, which affects the activity in the toluene combustion significantly. Raman spectra, XPS, and OSC studies were performed to reveal the formation of defect sites. The thermal redox properties were determined by H2-TPR. Catalytic activity tests were conducted on the toluene combustion, and CeO2-MOF-808 showed the best catalytic performance (T90 = 278 °C) due to its having the largest specific surface area, abundant active surface oxygen species, and low-temperature reducibility.

Triple-shelled CuO/CeO2 hollow nanospheres derived from metal–organic frameworks as highly efficient catalysts for CO oxidation

Through a metal–organic framework engaged strategy, triple-shelled CuO/CeO₂-8% hollow nanospheres are fabricated as superior nanocatalysts for CO oxidation with excellent catalytic activity and cyclic stability.